eChapters

A watershed is a geohydrological unit or all the land and water area bounded by a divide which contributes runoff to a common point. Watershed is considered to be synonymous with ‘catchment basin’ and ‘drainage basin’. In watershed management approach, development is not only confined to agricultural lands but also covers the area, starting from the highest point of the land to the outlet of the natural stream. Watershed management becomes increasingly important as a way to improve livelihood of people while conserving and regenerating their natural resources.

Watershed management is the process of creating and implementing plans, programmes and projects to sustain and enhance watershed functions that affect the plant, animal and human communities within a watershed boundary. It implies the judicious use of all the resources i.e. land, water and vegetation in an area to prevent soil erosion, improve water availability and increase food, fodder, fuel and timber on sustained basis.

Human societies over the ages have depleted natural resources in different ways and degraded their local environments. Indiscriminate cutting down of trees and accelerating the construction works lead to global warming and climate change. Climate scientists believe that human-induced deforestation is responsible for 18-25% of climate change. Accumulation of greenhouse gases in the lower atmosphere is the main cause of global climate change. The concentration of these gases in the earth’s atmosphere is increasing, mainly due to deforestation and the combustion of fossil fuels which release carbon dioxide.

The earth receives heat energy constantly from the sun through radiation. Some of the heat is absorbed and some is reflected. Carbon dioxide works like an invisible blanket that wraps around the earth and traps the heat inside, similar to the function of a greenhouse. A greenhouse is a structure that is used in colder climates to grow plants. Even when outside temperatures drop below freezing point, greenhouses are still warm enough inside to grow plants. Greenhouses are made of glass, which allows solar radiation to enter. The heat is trapped inside the greenhouse, allowing plants to grow all the year round. Increasing concentrations of carbon dioxide in the earth’s atmosphere insulate it like a greenhouse, leading to a gradual warming of the earth’s atmosphere. Carbon dioxide is the major greenhouse gas, but there are others as well, including methane and nitrous oxide.

9.1 Introduction

The rapid growth of industrialization and population significantly affect on the demand of ethanol as an alternate fuel. Generally, conventional crops like sugarcane and corn become unable to meet the demand of bioethanol, due to their primary role in food and feed. Therefore, lignocellulosic biomass from agriculture waste is attractive precursor for bioethanol production. Biomass is renewable organic material, abundant and cost effective. Ethanol production from agriculture waste has been projected an economically attractive option for industrial sector. However, sugar and starch derived ethanol have a more theoretical yield as compared to lignocelluloses, theses sources are insufficient for bioethanol production. The major agricultural wastes including rice straw, corn straw, wheat straw and sugarcane bagasse etc. can subsequently used for ethanol production. Rice straw has a highest worldwide potential for bioethanol production (205 giga liter) followed by wheat straw (104 giga liter), corn straw (58.6 giga liter), and finally for sugarcane bagasse (51.3 giga liter)¹.

A bio fuels is environmentally friendly options for power generation. Most of the fossil fuels are biological in nature. These are plant forms that, typically, remove carbon dioxide from the atmosphere and give up the same amount when burnt. The bio fuels are therefore considered to be “CO₂ neutral”, not adding to the carbon dioxide level in the atmosphere. The type of bio fuel used will depend on a number of factor, chief amongst them being the available feedstock and the energy that can be used locally.

India import 70% of the oil it uses, and the country has been hard by the increasing price of oil, uncertainty and environmental hazards that are concerned with the consumption of fossil fuels. In this context, bio fuels constitute a suitable alternative source of energy for India. There are two examples of bio fuels are Ethanol and Bio diesel (Renewable Diesel)

Ethanol can be made from biomass material containing sugar, starches, or cellulose (starch and cellulose are complex from of sugar)

Introduction

The guava fruit is a good source of vitamin C, pectin, calcium and phosphorus. The fruit is used for the preparation of processed products like jams, jellies and beverages. Guava jelly puree is very popular for its attractive purplish-red colour, pleasant taste and aroma. The puree can be used in juice, cakes, puddings, sauces, ice-cream, jam and jelly. Fruits can be preserved by canning as halves or quarters, with or without seed core (shells). Good quality salad can be prepared from the shell of ripe fruits. Their cultivation in India about 1.32 lakh ha area with production is 17.12 lakh tonnes. Biointensive pest management is use to major emphasis on conservation and enhancement of natural enemies and utilization of all compatible methods for achieving effective economical and safe pest control. These methods are the most appropriate in horticulture and in protected cultivation. The major aim of Biointensive pest management is to provide guidelines and options for the effecting management of pests and beneficial organisms in an ecological context. It will help to reduce the dependence on chemical pesticides and ecological deterioration. Biointensive pest management includes bio-pesticides derived from microbes, parasitoides, predators, botanicals and all conventional non-chemical methods or use of need based. Large number of insect pests has been reported to occur on guava at various growth stages. More than 80 species of insects and mites have recorded on affecting the growth and production. About three species of fruit flies, Bactrocera dorsalis, B. Cucurbitae and B. Zonata found to attack guava fruits, B. Dorsalis being the dominant. Maximum activity of fruit flies is observed during August to December reaching its peak during September. Two species of bark eating caterpillars, Indarbela quadrinota and I. Tetraonis are commonly found in the region. Sucking pests included Mealy scale, Chloropulvinaria psidii, Mealy bugs Ferrisia virgata, Plannococcus citri, Tea mosquito bugs, Helopeltis antonii, aphid, jassids etc (Azad Thakur et al., 2009). The major pests of guava that are economically damage on this crop given below:

Introduction

Avian salmonellosis is the term used to describe a large group of acute or chronic diseases caused by one or more members of the bacterial genus Salmonella, which is a member of the large family Enterobacteriaceae. Domestic poultry is known to constitute the largest single reservoir of Salmonella organism existing in nature. They include host specific and nonmotile members of the genus S. enterica subspp. enterica pullorum/gallinarum. If the infection of poultry is due to other Salmonella organisms other than Salmonella enteric subspp. enterica gallinarum/pullorum, the infection is then referred to as paratyphoid.

Introduction

Escherichia coli (E. coli) infections are responsible for significant economic losses to the poultry industry, worldwide. Disease conditions caused purely or partly by E. coli are as under:

Marek’s disease is a herpesvirus-induced neoplastic disease of chickens characterized by infiltration of various nerve trunks and/or organs with pleomorphic lymphoid cells. Marek’s disease is world wide in distribution. Marek’s Disease has been named after Josef Marek who published the disease in 4 roosters in 1907.

Occurrence

In chickens only, however turkeys and quail have limited susceptibility. Lesions similar to MD have been seen in pheasants, ducks, pigeons, geese, canaries, budgerigars, swans and great horned owls. However, aetiology for lesions in these species has not been proved. It may appear at 3-4 weeks but usually after eight weeks, with major losses from 12-25 weeks. Morbidity and mortality varies depending on the virulence of MDV.

Results of intensive researches in the field of synthetic seed technology seem promising for propagation of crop plants. However, as described in literature, the major stumbling block in establishing artificial seed production as a viable technology is a lack of understanding of the somatic embryo process and an inability to consistently produce high-quality propagules that can germinate in a soil environment with an acceptably high success rate7. Several aspects of the techniques are still underdeveloped and hinder its commercial application.

10.1. LACK OF STANDARD PROTOCOLS

The synthetic seed technology application in a commercial scale is still hampered by the low efficiency of the protocols and logistic behind it. Till today standard protocol for synthetic preparation is available for a limited number of plant species.

Principle

Nucleic acids leaving the rumen are mainly of microbial origin which are extensively digested in the small intestine and the purines liberated are absorbed. Only a small amount of absorbed purines are utilized by the host animal, the rest are metabolised forming hypoxanthine, xanthine, uric acid and allantoin. These metabolites are excreted mainly through urine. Therefore, with the understanding of how urinary excretion of purine derivatives (PD) respond to purine absorption i.e. the response curve of PD excretion to purine input into intestines, the microbial purine outflow from the rumen and the microbial N supply to the ruminant animal can be estimated by measuring the purine derivatives excretion through urine.

Nutrition plays a pivotal role for the animal research, be it health or production. Research in animal nutrition employs many basic techniques and chromatography is one of them. Chromatographic processes can be defined as separation techniques involving mass transfer between stationary and mobile phases. Various types of chromatography have one application or the other in analysis of food/feed components (Day and Williamson, 2001), quantitation of nutrients as well as the characterization of the effect of nutrients in biological samples like serum/plasma or tissues (Merken and Beecher, 2000).

A. Principle

Basically all chromatographic systems consist of the stationary phase that may be solid,gel,liquid or a solid/liquid mixture that is immobilized and the mobile phase, which may be gas or liquid and it flows over or through the stationary phase. This partition is achieved in one of the following ways:

Adsorption chromatography : It is one of the oldest types of chromatography. It utilizes a mobile liquid or a gaseous phase that is adsorbed onto the surface of a stationary solid phase. The equilibrium between the mobile and the stationary phase accounts the separation of different solutes e.g. adsorption chromatography, hydrophobic interaction chromatography.

Partition chromatography : It is based on a thin film formed on the surface of a solid support by a liquid stationary phase. Solutes equilibrate between the mobile and the stationary liquid (e.g. partition chromatography, reverse phase chromatography, gas-liquid chromatography, etc.).

Infra red (IR) spectroscopy is an analytical technique that serves both qualitativeandquantitativedetectionoforganicconstituents.NearInfraRed spectroscopy (NIRS) is actually a regression technique. Its predictions are based on correlations between spectral information (light absorption) and reference data fed to the spectroscopy. The principle of a NIRS machine is that a feedstuff is illuminated with light of a specific and known frequency (or wavelength) in the near infrared region. The chemical bonds in organic molecules absorb or emit infrared light when their vibrational state changes. In the near IR part of the spectrum, large changes in vibrational state are observed (overtones). In the near IR, ‘overtones’ are observed (larger than expected energy transitions that occur when molecules get ‘over excited’) resulting in broad, less well defined peaks.The characteristics of these peaks make quantification difficult as the areas of the peaks are difficult to determine and,typically,indirect (statistical) technique have to be applied to obtain usable data.Water and the C-H bonds absorb strongly in the near IR region,as do the N-H and O-H bonds,but most other have only a weak peak or none at all. The absorption of light by the feedstuff is then measured as thedifferencebetweentheamountoflightemittedbytheNIRSmachineand the amount of light reflected by the sample. Modern equipment typically uses monochromators, specially constructed mirrors that reflect light in a wavelength-dependent manner, thus allowing exposure of the sample to a single wavelength at a time. This allows samples to be scanned over the entire near IR region (they are also referred to as scanning instruments). However, as the monochromator relies on mechanical positioning of the mirror for its wavelength accuracy, the spectra generated are less reproducible from machine to machine.

Samples those are relatively transparent, such as most gases and liquids, can be assayed easily from the light transmitted (transmittance). For opaque solid samples, however, many problems arise. IR light can only travel through a few microns of opaque material. A few microns, however, can be very difficult to work with, especially when the non-homogeneous nature of most agricultural products is considered. Thus, the major challenge in applying IR spectroscopy to solid samples is sample presentation. For this technique, the sample is put into a cup and illuminated with IR light. This light can have three different fates; it can be reflected off the surface of the sample, it can enter the sample where it may be absorbed if it encounters a bond that matches the light’s frequency or, if it does not encounter such a bond, it can bounce back out of the sample. The light bounced back (or reflected) from the sample is captured and its intensity measured.

2.1. Place of SME in Remeding The Nigerian Economic Paradox

This can best be explained by the two-gap economic model. The Two-Gap Models of development are contained in the Post-Keynesian growth models designed by Harrod and Domar. They tried to identify the pre-conditions for the economic growth of market economies. These two preconditions are es- sentially rooted in the Nigerian economy and these are (1) Internally: inad- equate savings would definitely translate to investment. The GAP between these two is called saving constraints (SAVING GAP). Closing this gap re- quires SME-financing. (2) Externally: inadequate foreign exchange arising from inability to export vis-à-vis high importation will lead to short fall in foreign exchange. The GAP between these two is called foreign exchange constraints (TRADE GAP) which can be corrected by facilitating the establishment of indigenous enterprises through a national embrace of the SME-initiatives. Ni- gerian leaders resorted to foreign aid assistance from developed countries, multilateral and bilateral international organizations to salvage the economy from total collapse; but, we can’t continue to carry the begging bow as our benefac- tors only give us fish and don’t teach us how to catch fish.

Enterprises

5.1. Worldview on the Issue of Small and Medium Enterprises

Research on successful and unsuccessful new and young growing enterprises can aid understanding of growth processes and barriers to growth. Research on how the growth of new enterprises can be better supported, particularly through education at colleges and universities also would be useful. Hence, all over the world increasing attention is being paid to the potential of university education to facilitate high growth enterprises. For example, research has demonstrated that a high-growth entrepreneur in Europe is better educated than other entrepreneurs and the general population. In Europe, most founders of technology based enterprises have a university degree. Research carried out in Germany has shown that enterprises started by individuals with university degrees tend to grow faster than enterprises founded by n on -academics (Egeln, 2000). (Ley, 2006) states that, Research is also needed on how to motivate and nurture the entrepreneurial potential of female students who traditionally may be less inclined to found and manage innovation-oriented high-growth firms. Another group of specific interest is ethnic and immigrant entrepreneurs, who - though often not innovative in the beginning - may introduce novel business practices and subsequent product and service innovations within established communities.

Nigeria: Economic and Non-Economic

6.1. Issues in Growth and Development in Nigeria

Nigeria has attempted through various reform programmes to better the lots of her citizens by providing dividend of development, such as education, health, social infrastructure. Broadly speaking, the features of an underdeveloped economy create obstacles in the way of economic development, and hamper economic progress. These features emerge out of economic, social, political, religious and institutional factors. It would be wrong however to conclude that only economic factors are responsible for poverty or economic backwardness of a country. Non-economic factors are equally responsible for the under development of an economy. The factors discouraging economic development may be classified into economic and non-economic factors which are:

8.1. Major Obstacle to Nigeria Economic Growth

In Nigeria, high transport prices are rightly seen as a major obstacle to economic growth of the region. This has been documented in several studies. One of them (Amjadi and Yeats, 1995) even concluded that, in Nigeria, transport costs are a higher trade barrier than import tariffs and trade restrictions. In this paper, it is analyzed, identified and quantified the factors behind Nigeria’s high prices of road transport, with the purpose of helping policy-makers adopt appropriate actions to reduce transport prices to domestic and international trade. Before the presentation of the results, a distinction has to be made between logistics costs, transport prices, transport costs and vehicle operating costs in order to avoid the usual confusion. This distinction is useful because prices may or may not reflect transport cost:

10.1. Challenges and Opportunities in SMEs

The Nigerian transport system faces great challenges and also offers several opportunities. The predisposing factors include:

• The size of the country: With area coverage of 923,768.64 km2, spanning longitude 30E-160E and latitude 40N-140N Nigeria is a comparatively large country. It is inhabited by over 140 million people. Transportation is a crucial instrument for linking the country economically, socially and politically.

• Nigeria’s vast natural resources: Nigeria is endowed with petroleum, gas and solid mineral resources. The country is also blessed with abundant agricultural and forest resources, which vary by the three ecological zones of the country. The country is endowed with a highly productive open sea with abundant and diverse marine resources within her coastline of 852km bordering the Atlantic Ocean in the Gulf of Guinea and her maritime area of 46,000 km. This variation is a factor in spatial interdependence. Transport plays an important role in the exploitation and distribution of these resources and in the reduction of spatial inequality and in poverty alleviation.

12.1. Practice of SMEs in Africa-Critical Review

Previous studies in Kenya have focused on the role of entrepreneurship education in job creation, enterprise management and economic development (Simiyu, 2010; Mwangi, 2011; Warren, 2011); hardly any have addressed the process of delivering entrepreneurship education. Research provides new knowledge to guide educational practice, by making an initial foray into the teaching of entrepreneurship education in Kenya. The envisaged entrepreneurially empowered TTI graduate is a product of the training function. This book examines factors which affect implementation of entrepreneurship education programme in TTIs in Kenya. The variables investigated were teaching methods, assessment methods, teacher’s network, and availability of training resources. The findings show that teachers do not accord entrepreneurship education t he appropriate pedagogical approach that it deserves; they seem resigned to using ineffective traditional pedagogies. Meanwhile, the subject is inadequately resourced by TTI administrations. The results of this research invite the attention of entrepreneurship educators, practitioners and stakeholders to employ effective strategies for dev eloping entrepreneurial key competencies in TTI trainees.

16.1. Overview of Medium and Small Enterprises (MSE) Growth

In most developing countries, MSEs constitute the vast majority of firms, generating a substantial share of both overall employment and output. Given their significant economic role, one might expect MSE growth to drive overall increases in output and income levels. In many cases, however, their largest economic contribution appears to be one of maintaining, rather than generating new, employment and income for the poor. At an aggregate level, MSEs demonstrate impressive growth, 3 especially when compared with larger firms. However, many individual MSEs grow slowly or not at all, in some cases, due to a conscious decision on the part of the business owner. Overall growth rates are often fueled by the rapid expansion of a narrow group of highly performing MSEs. In dev e loping as well as in developed countries, there appears to be a small group of “gazelles”, firms that outperform their peers and drive aggregate employment and productivity growth for the small business sector. Why do some MSEs expand rapidly, while others stagnate? What factors account for the wide variation observed in MSE growth trajectories? This paper explores a wide array of specific factors, but it is first useful to consider a broader conceptual frame work of opportunities and capabilities. Clearly, opportunities for profitable business activities shape the ability of an entrepreneur to expand his or her firm.

Looking forward, it is clear that traditional and western medicine have the potential for rich collaboration that benefits both disciplines. There is growing interest in this partnership, as shown by the number of international journals now dedicated to such research, such as Journal of Ethnopharmacology, Complementary Therapies in Medicine, eCAM, Alternative Therapies in Health and Medicine, and the Journal of Alternative and Complementary Medicine. Even the WHO has taken note of the rich possibilities of the future of TM, having put out such documents as ‘WHO General Guidelines for Methodologies on Research and Evaluation of Traditional Medicine’ and ‘WHO Guidelines on Good Agricultural and Collection Practices (GACP) for Medicinal Plants’. Despite this enthusiasm, there are several areas where the international community will need to focus their attention if the goal of integrating botanical medicines for the good of human health is to be reached.

Downy Mildew (Green Ear)

Sclerospora graminicola

Economic Importance

• Downy mildew is reported from temperate and tropical regions of the world.
• In India, the disease is a major stumbling block in the full exploitation of yield potential of hybrids.
• Several epidemics have been observed which resulted in substantial grain yield losses (upto 60 percent) in F₁ hybrids under South Indian conditions.
• Usually the losses in grain yield are directly proportional to disease incidence in the field.

Wilt

Fusarium oxysporun lini

Economic Importance

• The wilt is very serious disease and occurs in almost all the countries where linseed is grown.
• Continuous cropping in the infected field makes the soil sick.
• Yield losses upto 80 percent has been reported due to this disease. However, in severe cases crop is destroyed completely.

Ozonium Wilt

Ozonium texanum var. parasiticum Thirum / Guizotia abyssinica

Economic Importance

• The disease was reported around Varanasi.
• Heavy losses are incurred as the diseased plants dry.

Leaf Spot

Colletotrichum capsici

Economic Importance

• The disease is common in many parts of South India, and in recent years has become very severe, causing much damage to the crop.
• The yield losses occur due to leaf spot infection is through the loss of photosynthetic green surface.
• During the period of heavy infestation, yield loss could be as much as 50%.

X-ray diffraction (XRD) is an important experimental tool used in determining crustal structure of material system in bulk and nanoregimes. Therefore, it is important to understand the basic concepts of XRD.

Introduction

Pulses belong to the taxonomic family Fabaceae, containing over 18,000 species divided into the three sub-families Mimosoideae, Caesalpinoideae and Papilionoideae. Pulses are commonly cultivated for several decades in all over the world because of the nutritional value of their seeds. Among different pulses, soybean, chickpea, common bean, cowpea, green gram, black gram and pigeon pea contribute significantly to serve the major protein source for the diets of large numbers of people living in Asia, Africa, and South America.

Production and Productivity of Pulses in india

In India, the production of pulses has not been able to keep pace with their domestic demand, resulting in import of 4-5 million tonnes of pulses per annum, especially from the countries like Canada, Myanmar and Australia to meet its domestic requirement (Kumar et al., 2018). India is the largest producer (around 25% of global production), however it consumes 27% and imports around 14% of its pulses requirements. The yield of pulses in India is quite low at 781 kg/ha which might be due to various factors. Pulse crops does not show any significant increase in area and production during 1950-51 to 2009-10, however, significant growth in area and production has been recorded during the last five years (i.e., 2010-2011 to 2016-17), with the adoption of high yielding varieties, increased usage of agricultural inputs like fertilizers and manures etc. The pulses under irrigation are cultivated in about 37% of the area while 63% of pulses are grown under rainfed conditions.

The productivity of pulses has increased about 77% at 779 kg/ha during 2016-17 from the level of 441 kg/ha during 1950-51. It is imperative to mention that the New Agriculture Technology (NAT) introduced during mid-sixties has increased the production of food-grains from 50.82 million tonnes during 1950-51 to 275.68 million tonnes during 2016-17 with the increase in area from 97.32 million hectares to 128 million hectares. In order to achieve self- sufficiency in pulses, the projected requirement by the year 2025 is estimated at 27.5 MT and to meet this requirement, the productivity needs to be enhanced to 1000 kg/ha.

Introduction

India is well-known around the world for its rapid economic growth rates over the last fifteen years or so, fuelled in part by the spectacular growth in its export- oriented software and ICT-based services sector. Many other countries look to India as a model for global outsourcing and try to imitate elements of this in their own strategies (Carmel 2003; Heeks and Nicholson 2004). Success at a particular period of time does not, of course, guarantee its continuation and commentators have expressed concerns such as rising wage rates and skills shortages of ICT professionals (CACM 2007), and increasing competition from countries such as China (Negroponte 2003). It is likely, however, that India will remain a major player in the ICT industry for years to come and thus its global image as an ICT success story will continue. Viewed from a broader development perspective, things are not so simple. The new wealth that has arisen in India from the ICT boom benefits the relatively wealthy and educated in the first instance (Kambhampati 2002). Will this trickle down to the poor and uneducated? Statistics paint a mixed picture of the current situation. On the one hand, India is now the world’s fourth largest economy in purchasing power parity terms, and has enjoyed high growth rates for over a decade rising to an average of over 8% per annum in the period 2004-7 (World Bank 2007).

On the other hand, India was ranked as 128th out of 177 countries on the human development index 2005 (UNDP 2005) which is a composite index based on life expectancy, literacy and education levels, and economic standard of living. Shocking statistics include the percentage of malnourished children under 5 being 46%, the adult female literacy rate as only 48%, and the percentage of the rural population using adequate sanitary services as 18% (World Bank 2007, UNICEF 2004). A major development issue, therefore, is whether India can seriously address the needs of all of its people, including the vast numbers of poor and uneducated in the rural areas and the urban slums. A related sub-question is whether, and to what extent, can ICTs be used to provide development benefits to all Indian citizens. There are increasing attempts to use technology in this way through projects such as e-government services and telecentres in poor areas.

Introduction

Knowledge and Knowledge management are concepts, which are debated extensively by managers, analyst and academicians. When we refer to knowledge, most of us mainly tend to think of codified and documented knowledge like patents, databases, manuals, white papers etc. knowledge is intuitive, contextual, linked to experience, past memories and difficult to codify, document and communicate. Unfortunately, there is no universal definition of Knowledge Management (KM), just as there’s no agreement as to what constitutes knowledge in the first place. In broadest context KM is the process through which organizations generate value from their intellectual and knowledge-based assets. It is the practice of harnessing and exploiting intellectual capital to gain competitive advantage and customer commitment through efficiency, innovation and faster and more effective decision-making. Most often, generating value from such assets involves sharing them among employees, departments and even with other companies in an effort to devise best practices.

Today, knowledge is still considered power - an enormous power in fact - but the understanding has changed considerably, particularly from the perspective of organizations. The new paradigm is that within the organization knowledge must be shared in order for it to grow. It has been shown that the organization that shares knowledge among its management and staff grows stronger and becomes more competitive. This is the core of knowledge management - the sharing of knowledge. Knowledge management (KM) is all about managing organization’s knowledge effectively by sharing and having a systematic activity for creation of knowledge and exploiting it for the market and benefit of the organization. KM techniques and processes provide such a structured approach to explicate a significant part of this tactic knowledge document in knowledge repositories and also share in teams, through intensive dialogue and discussions. KM refers to the critical issues of organizational adaptation, survival and competence against discontinuous environmental change.

Introduction

E-Portal otherwise called as an electronic portal is a webpage that allows business application procedure developed by framework to be easily deployed via internet. Portals are usually created in standard Java format. It utilizes an Extensible Mark- up Language (XML) interface protocol in addition to Java Server Pages (JSP). Portals are given different names based on the field they are created. For example, if the portal is developed to improvise agriculture, then they are termed as agri-por- tals. Similarly, if a portal is developed for academic reasons they are called web portal. Examples of web portals are iGoogle, MSNBC, Netvibes, and Yahoo.

Portal concept has opened new possibilities to address some of the issues concern- ing the personal management of academic information and knowledge through internet. Some of the main issues are the lack of integration, personalisation and customisation of existing academic information sources and systems. A Web por- tal can be defined as a Web site that aggregates an array of content and provides a variety of services including search engines, directories, news, e-mail and chat rooms. Portals have evolved to provide a customised gateway to Web information. A high level of personalisation and customisation is possible (Melzer 1999; Boye 1999). It was felt that the portal concept could be further developed to function as a sophisticated Web interface that can support the task performance (teaching and research) of academics.

Introduction

Audiotex is a voice response application that allows users to enter and retrieve information over telephone. Example Interactive Voice Response System (IVRS). Audiotex is a generic name for interactive voice response equipment and service. Audiotex connected with a telephone is like a data processor connected to a data terminal. They are passive service which provides through appropriate access by standardised procedure for the user of Audiotex service to communicate with database via telecom network (i.e.) a subscriber can retrieve the information at any time by interacting with the audio service equipment by using the existing telephone line.

Audiotex is essentially a content provider. It enables the subscribers to record their message in a computer memory area called a “Mail Box”. The recorded message can be retrieved by the recipient by dialling a telephone number. Audiotex service is a telecommunication system which enables a caller, by dialling a designated telephone numbering beginning with ‘1800’ to receive a recorded announcement or to interact with a programme whereby he/she may communicate by means of a dual tone multi frequency telephone key pad, a touch tone telephone or other similar device with a value added network connected to the public switched telephone system for purposes of sending or receiving information. However, there are differing views across the world on what constitutes “Audiotex service”. European Telecommunications Standards Institute in its ETSI technical report 131 (June 1994) on “Terminal Equipment(TE); An investigation into the need for standardization in the area of stored voice services” has commented that “ It can be seen that there are many differing views as to what constitutes an Audiotex service and, in formal usage (e.g. in lectures or articles on the subject), a distinction is always drawn between voice messaging and the other services (information, consultation, transaction, etc.). It is thus misleading to use the word Audiotex without a previous definition. Therefore, in many countries the term “stored voice service” is used to describe Audiotex and each separate application and service is distinguished by a more precise definition.

Introduction

The Kisan Call Centre is an ICT initiative launched by the Department of Agri- culture and Cooperation, Ministry of Agriculture on January 21, 2004 to instantly respond to farmer’s queries in their local language. Farmers from any part of the country can contact KCC simply like common public do to contact the customer care of their preferred network for queries. If it is a BSNL connection KCC can be contacted by just dialling 1551 toll free number. If it is other network, then farmers can dial “1800-180-1551” and get their query solved. In Tamil Nadu, until 2014, it was Cartel India Limited which acted as Level-III centre for Kisan Call Centre in Tamil Nadu. From May 2014 onwards, the administration of Kisan Call Centre was taken over by Indian Farmer Fertilizer Company (IFFCO) and working since then in the name of IFFCO Kisan.

In today’s condition, the policy makers feel it as a real challenge to bridge the com- munication gap that prevails between two farmers, between two villages, between two regions and perhaps between two countries. The only way to bridge this gap is through some ICT initiatives. Recent studies have shown impressive growth of telecommunication network for effective information utilization and delivery of knowledge and information in the country. In Kenya, the helpline service was start- ed on a pilot basis by GSMA Foundation, Inc., which was funded by Rockefeller Foundation. The technology was named Kenya Farmer’s Helpline. It was mainly started to bring a change in the economic, social and environmental development in the country. The helpline received very good support from the local farmers and till 2010, the helpline solved queries of over 30,000 farmers. During the same period, India solved queried of over one lakh farmers. Now, the number would be much more than what we expect.

Introduction

Satellites are specifically made for telecommunication purpose. They are used for mobile applications such as communication to ships, vehicles, planes, hand-held terminals and for TV and radio broadcasting. They are responsible for providing these services to an assigned region (area) on the earth. The power and bandwidth of these satellites depend upon the preferred size of the footprint, complexity of the traffic control protocol schemes and the cost of ground stations. A satellite works most efficiently when the transmissions are focused with a desired area. When the area is focused, then the emissions don’t go outside that designated area and thus minimizing the interference to the other systems. This leads more efficient spectrum usage. Satellite’s antenna patterns play an important role and must be designed to best cover the designated geographical area (which is generally irregular in shape). Satellites should be designed by keeping in mind its usability for short and long term effects throughout its life time. The earth station should be in a position to control the satellite if it drifts from its orbit it is subjected to any kind of drag from the external forces.

The psychological sets that can be barriers to communication can be characterized into several basic categories. These sets can occur in the sender or in the receiver in the communication process. The sender has the ability to recognize these barrier categories when they occur and to transform communication to overcome them. However, the receiver is a different story. If the receiver is interested in communication, he or she can recognize when these barriers arise and can consciously overcome them. On the other hand, when a receiver is passive in the communication process, he or she does not recognize the barriers and the sender can do little to overcome the blockage.

Mutations are sudden and heritable changes in the genetic material. They can result in deletion, inversion and translocation of certain portions in the chromosomes, which can result in the changed expression of a trait due to the interaction of alleles within or without the locus, sometimes the effects revert back or can be heritable.

Most of the fruit crops are highly heterozygous. However, heterozygosity is one of the advantages when it comes to mutation. In highly heterozygous crops wherein there is a need for improvement in a single trait, mutations have been of great use. One of main limitations is use of vegetative material, which due to the unlikelyhood of uniform penetration and distribution of mutagenic agent can result in chimera. Although hybridization and selection have made a fair dent in the improvement of fruit crops, mutation is one of the methods that can be relied upon to develop pre-breeding lines and to bring about change in the quantitavie traits. Another very important fact is that there are crops like grapes wherein a lot of spontaneous mutants have become established varieties viz., Sonaka and Saritha to quote a few. Some of the existing varieites wherein one or two traits need to be improved, mutation would greatly help in this in comparatively short time. In some of the crops like sapota, wherein the conventional breeding would take long time, mutation can be resorted to both for inducing variability in the germplasm as well as for trait improvement. It is also to be noted here that mutation breeding can be a good supplement for conventional breeding, more so with the emergence of tissue culture propagation, which often throws up spontaneous mutants. Mutation as a methodology can also be tried in some fruit crop spp where there is no disease resistance source within. It can also be adopted in cases where there is a need to break linkages.

Sapota [Manilkara zapota (L.) P. Royen, (Manilkara achras (Mill.) Fosber] is a member of the family sapotaceae. It is a fairly slow growing and long-lived tree. It is valued for its delicious fruit in India, while in Guatemala, south East Mexico, British Honduras, chickle is commercially produced which is the main ingredient in preparation of chewing gum. Chickle is extracted from trunk and unripe fruits of the tree as white latex exudate. Although synthetic gums are primarily used, countries like Mexico, Venezula and Guatemala still grow sapota for chickle.

It is native to South Mexico as well as North East Guatemala. Manilkara species is found in forests throughout tropical America, which was introduced long ago followed by West Indies, Bahamas, Bermuda and Southern part of Florida mainland. Early in colonial times, it was carried to Phillippines, and later distributed to Malaysia and other countries in the tropics (Purseglove, 1974). It is not known when it was first introduced to India. Commercial cultivation was first taken up in Maharashtra during 1898 (Cheema et al., 1954). Future of sapota appears to be promising, since attention in this crop is enthusiastic from growers and consumers in many countries. Sapota is grown on commercial basis in India, Philippines, Sri Lanka, Malaysia, Mexico and Venezuela.

India is one of the largest producers of sapota in the world. Major states growing this fruit crop are Maharashtra, Gujarat, Andhra Pradesh, Karnataka, Tamil Nadu, West Bengal, Kerala, Uttar Pradesh, Punjab, Assam and Haryana. India’s production of sapota continues to grow up and there is an active research program in India with specific goals towards improving storage, transport and marketing strategies.

Introduction

Canopy management is defined as managing plant architectural design as per need, using their inherent characteristics which is in accordance with a given set of conditions and resources to perform the plant maximum (Nath et al, 2014).The modern principles of sustainable fruit production systems focused on optimal use of natural resources (light, water, soil fertility) where the input (labour, energy, fuel, other material) and output (yield) are well balanced and the resources remain renewable.

Fruit orchards can be considered as artificial ecosystems converting the energy of photosynthetic active radiation (PAR) into edible, marketable fruits for human consumption. The core of this system is the bio-factory of leaves driven by the absorbed PAR. Several data support that the light interception is the basic factor for the modern orchard systems. Factors as LAI (Leaf area index), tree spacing, training and pruning systems, fruiting wood development, rootstocks and genotypes also have an important bearing on orchard efficiency.

The main objectives of canopy architecture is to develop strong tree framework, maximize utilization of light, accommodate more number of trees per unit area, maintenance of tree orchard uniformity and induce and sustain proper amount of well distributed fruiting terminals.

In order for the fruit production system to remain sustainable, the orchard system should favour the contributory role of an input of natural origin to the maximum possible extent, in improving the yield in the early years and provide high yields after the trees are mature until the planned age of the orchard. Recent development in the tree architecture has produced some promising tree training and pruning systems as well for high density fruit orchards.

Introduction

Any project is undertaken and an investment is made with expectation of realizing benefits out of it. This applies to projects both in the private domain as also in the public domain. Hence, it is imperative to assess the benefits derived from the project investment over its entire economically viable. The extent to which project contribute to various aims of development (benefits) and make use of scarce resource (costs) can differ widely. A proper project preparation requires an assessment of the various benefits and costs associated with execution of a project. Methods to determine, analyze and assess the relevant benefits and costs of a project are known as cost-benefit analysis. The cost- benefit analysis ensures that all the relevant factors that contribute to a project’s net benefits are systematically taken into account, whether they relate to an individual, a firm, a social group, the public sector or the country as a whole.

There are many tools or criteria for the financial evaluation of projects. However, the important and commonly used evaluation criteria are simple Rate of Return, Payback Period, Net Present Worth, Benefit- Cost Ratio and Internal Rate of Return.

Economic appraisal and evaluation helps the decision makers who are saddled with the responsibility to prioritize measures in a situation with enormous needs and quite limited resources. Government planners as well as donor agencies are all in need of enough data in order to make rational choice or decision in selection of investment alternatives. Most of the economists believe that economic analysis cannot give the final answers. There will always be lack of data, uncertainty about the future, disagreement on the methods, and similar issues. However, economic analysis, if properly done, can indeed be of much help to decision makers.

1. Introduction

India is an exquisite example of biodiversity. From time immemorial scholars like Charaka, Barathwaj, Athreyan, Agnivesha, Dhanyandhari, Shushruthan, Wakbadan and Bharathduja etc. have studied and explored the possibility of such a diversity for human welfare and the most conspicuous exploration in this field has lead to the discovery of so many indigenous medicinal plants that were scripted mainly in Vedas (1500 BC) that contain rich materials on herbal lore of that time. Charaka in his medical treatise – Charaka samhita delt with innumerable medicinal plants, their usage and descriptions. Besides the two above said texts, treatise like Sushruth samhita and Ashtangha hridaya samhita are a few among other precious ancient texts. Thus the gradual accumulation of practical and systematic medical knowledge lead to the formation of Ayurveda.

Ayurveda - the science of life, prevention and longevity, is the oldest and most holistic or comprehensive medical system available. It was placed in written form over 2000 years ago. Ayurveda is said to have been first complied as a text by Agnivesha (Agniveshtantra). This text was later revised by Charaka and renamed as Charaka samhita (completed by Dhridhabala). The concept of medicines envisaged in the Ayurveda comes from the monumental scripture called Ashtanga hridaya and Sahasrayoga.

1. Introduction

Phytochemists and pharmacologists from all over the world obtain several patents for herbal drugs developed on the basis of the indigenous knowledge systems of different ethnic groups. Many countries rich in traditional medicinal knowledge have been conducting ethnobotanical survey of medicinal plants (Patil and Bhaskar, 2006). In India the native people have exploited a variety of herbal medicines for effective curing of various diseases. The plants used, preparation and administration of drug varies from area to area (Rajaram, 2006). The ethnobotanical research still plays its evident scientific role in stimulating further phytochemical and pharmacological studies (Leporatti and Corradi, 2001).

The objective of this study is to interact with Kani traditional healers and document their traditional knowledge. The Kani-tribals are one of the most primitive hill tribes of Western Ghats. They occupy the slopes of the Agasthiarmalai in Tirunelveli, Tamil Nadu, India. Some ethnobotanical studies have been done in this area (Anonymous, 1948-76, Chopara et al., 1956, Satyavati, 1976, Jain, 1981, Nagendra Prasad et al., 1996). The impact of deforestation, urbanization and modernization makes the tribals shifting from their natural habitats to urban areas. Documenting the traditional knowledge through ethnobotanical studies is important for the conservation of medicinal plants and traditional medicines.

ABSTRACT

In this study, different concentrations of acetone, alcohol, benzene and chloroform extract of Wedelia chinensis were carried out against human pathogenic bacterial and fungal strains. High frequency of anti-bacterial activity was observed on the Escherichia coli. Moderate amount of antibacterial activity was observed on Staphylococcus aureus. Highly resistant bacterium to this plant was screened through antibacterial pour plate method, which showed on the following organisms Citrobacter diversens, Serratia marcescens and Streptococcus pyogenes. The aim of this study is main evaluation of antimicrobial activity of plant. The ethanolic extracts demonstrating antibacterial and antifungal activity could result in the discovery of antibacterial and antifungal agents.

ABSTRACT

The present communication thr ows light on 118 species of flowering plants (Angiosperms) found in Dewghat forest (in Koraon forest range of Uttar Pradesh), which are traditionally used by the “Kol” tribal community and some other forest dwelling people, viz. Belbans, Bahelia, Mushahar etc. An enumeration of these plants materials is prepared with their botanical names, local / vernacular names, family names and using practices provided in this paper. This is the first ever report from the area under study on this aspect. In case of Anogeissus latifolia the leaf juice is used poisonous insect bite, grounded flower used in chronic diseases and its fruit is used asthma. The seeds of Cleome viscosa are given orally in stomach diseases. The leaves of Cassia alata used for ringworms and skin disease. The leaves juice and seed of Euphorbia thymifolia is used as a strong purgative. It leaf juice is also used for the remedy of ringworms and other skin diseases. It is an antidote for snakebite. The present study is aimed at indexing of all medicinal flora occurring in Dewghat forest (U.P.) and their uses for the benefit of the researchers to undertake studies on the prospects and potential of commercial exploitation.

ABSTRACT

Three medicinal plants namely, Eryngium foetidum (Apiaceae), Centella asiatic (Apiaceae) and Hemidesmus indicus (Asclepiadaceae) were collected from Similipa Biosphere Reserve forest and used in this investigation. Ethanolic, methanolic chloroform and aqueous extracts of different parts like leaf, root and stem were prepare through standard techniques and screened for their anticandidal potencies agains Candida albicans, C. tropicalis and C. krusei. Anticandidal activity of the extracts wer tested using preliminary and secondary screening methods, like disc diffusion metho (DDM) & agar-cup-plate-method (ACPM) and poisoned food technique (PFT respectively. On an average the inhibitory tendency of the extracts can be arranged as ethanolic extracts > methanolic extacts > chloroform extracts > aqueous extracts Maximum degree of inhibition was observed against C. krusei. Among the plant Hemidesmus indicus showed better anticandidal activities in comparison to other tw plants tested.

ABSTRACT

A rapid micropropagation technique have been established for Solanum trilobatum L., a medicinal plant from internodal explant. Callus formation was observed from both cut ends of explants cultured on MS medium supplemented with 2,4-D (3.0 mg/l). Direct shoot and multiple shoot formation were noticed from explants (proximal cut end) on BAP (2.0 mg/l) alone and BAP (2.0 mg/l) + NAA (0.5 mg/l). Root formation was directly produced from the basal cut end of explants cultured on IBA (1.0 mg/l). In vitro plantlet regeneration has been achieved on BAP (2.0 mg/l) + IBA (1.0 mg/l). Regenerated plants were transferred to sterile vermiculite and soil mixture (3:1). In vitro propagated plants were grew successfully under the field conditions. In vitro propagation can be a useful tool for the conservation of this medicinal species.

The basic points that are to be considered while choosing appropriate enterprise in IFS are:

1. Soil and climatic features of an area/locality.
2. Social status of the family and social customs prevailing in the locality.
3. Economic condition of the farmer (Return/income from the existing farming system).
4. Resource availability at farm and present level of utilization of resources.
5. Economics of proposed IFS and credit facilities.
6. Farmer’s managerial skill.
7. Household demand.
8. Institutional infrastructure and technological knowhow.
9. Market facilities.

Integration of Enterprises

In agriculture, crop husbandry is the main activity. The income obtained from cropping is hardily sufficient to sustain the farm family throughout year. Activities such as dairying, poultry, fish- culture, sericulture, biogas production, edible mushroom cultivation, agro- forestry, agri- horticulture etc. assume critical importance in supplementing their farm income. Assumed regular cash flow is possible when cropping is combined with other enterprises. Judicious combination of enterprises keeping in view of the environment condition of a locality will pay grater dividends. At the same time it will promote effective recycling of residues/ wastes.

Integrated farming system seems to be the answer to the problems of increasing food production. For increasing income and for improving nutrition of the small scale farmers with limited resources without any adverse effect on environment and agro- eco-system. In a cropping system the amount of by products can be as high as or higher than marketable produce. This may go to waste if not utilized in an animal waste component and to reduce the cost of production of the economic produce of component two and finally to entrance the net income of the farm is whole.

Livestock is the best complementary enterprises with cropping, especially during the adverse years. Installation of a biogas plant in crop- livestock system will make use of the wastes, at the same time provides valuable manure and gas for cooking and lighting.

The classification of the farming systems of developing regions may be based on the following criteria:

• Available natural resource base, including water, land, grazing areas and forest; climate, of which altitude is one important determinant; landscape, including slope; farm size, tenure and organization; and
• Dominant pattern of farm activities and household livelihoods, including field crops, livestock, trees, aquaculture, hunting and gathering, processing and off-farm activities; and taking into account the main technologies used, which determine the intensity of production and integration of crops, livestock and other activities.

Abstract

Multi-commodity flours were prepared by blending rice flour, mung flour and potato flour with wheat flour in ratios of 0:0:0:100, 5:5:5:85, 10:10:10:70 and 15:15:15:55, respectively and packaged in glass jar, high density polyethylene and aluminium flexible packaging for biscuits development. The standardized formulations for biscuit had ingredients as 100 g flour/multi-commodity flour, 45 g sugar, 45 g hydrogenated fat, 1.25 g sodium bicarbonate, 1.25 g baking powder and 1.0 g curry leave powder. The biscuits were baked in convective baking oven at 180 > C for 10-15 min till baked. The well baked biscuits were removed from the oven, cooled to room temperature, packaged and stored under ambient condition. The physical quality (Mass, thickness, diameter, spread ration percent spread and bulk density), of biscuits were analyzed just after preparation under ambient condition. Results were also reported that the spread ratio of multi-commodity flour biscuits increased with decrease in the incorporation of wheat flour in multi-commodity flours. It is clear that spread ratio is mostly influenced by the diameter and thickness of biscuits.

Abstract

Food processing involves the transformation of raw animal or plant materials into consumer-ready products, with the objective of stabilizing food products by preventing or reducing negative changes in quality. Without these processes, we would neither be able to store food from time of plenty to time of need nor to transport food over long distances. Food processing has also gained its importance in the wide variety of diet among people throughout the globe and availability of exotic food items at various places. Processing of food items enhance the taste, flavor and aroma of the food thereby increasing the overall chances of its acceptability among the masses. So, it is essential to determine and recognize the database of physical and engineering (aerodynamic and mechanical) properties of these agricultural products because these properties play an important role in designing and developing of specific machines and their operations such as sorting, separating and cleaning, also to determine the optimum in seed metering device in pneumatic planter and precision sowing machine to suite every size of these grains.

Abstract

The research work was conducted on the moisture dependent physical properties of kidney bean (White speckled kidney beans) were analyzed. Length, width, thickness varied between 1.53-1.90, 0.79-0.94, 0.58-0.76 cm for kidney beans, respectively. Arithmetic mean diameter and geometric mean diameter were 0.96-1.19 and 0.88-1.11 cm₂, respectively. Volume, Sphericity and surface area ranged between 0.44 -0.87 cm₃, 0.57-0.60 and 2.91-4.68 cm₂ for white speckled kidney beans, respectively. The kidney bean was soaked in normal water with initial moisture content 14.22 % (db) upto 270 min and attained the final moisture upto 83.23 % (ab).

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.

Abstract

During present investigation a comparative study was done to see the effect of storage on physical properties of tomatoes (Lycopersicon esculentum Mill) packed in HDPE and stored under ambient temperature. Four varieties of tomatoes taken for current investigation were Badshah, Himshikhar, NS-524 and Raja. From the studies it was clear that TSS increased gradually during storage duration for entire tomato varieties due to loss of some moisture from tomatoes. Variety NS-524 shows maximum shrinkage among all during observation period.