eChapters

Abstract

Tremendous changes in lifestyle, eating habits and shifting rural habitations are causing an irreversible change that is leading to manifold multiplication of health problems and these health issues have attracted the attention of every segment of the society in the recent past. Today foods are not intended to only satisfy hunger and to provide necessary nutrients for humans but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers. Due to increasing control over nutrition and health, consumers are becoming more proactive towards their health. In this regard, functional foods play an outstanding role and they are gaining public acceptance and there is great scope for value-added as well as health promoting food products in developing countries. Various terms have used for functional foods throughout the world such as designer foods, medicinal foods, nutraceuticals, therapeutic foods, superfoods, foodiceuticals, and medifoods. People are interested in foods which boost immune system, reduce the risk of diseases and improve health. The increasing demand of such foods can be explained by the increasing cost of healthcare, the steady increase in life expectancy, and the desire of older people for improved quality of their later years. Typically, a food marketed as functional contains added, technologically developed ingredients with a specific health benefit. These range of products cannot be truly classified as ‘food’ and a new hybrid term between nutrients and pharmaceuticals, ‘nutraceuticals’, has been coined to designate them. The development of functional foods involves the application of various food processing techniques such as microencapsulation of functional ingredients for controlled release, nanotechnology for the development of nanostructured (or nanotextured) food ingredients and delivery systems for nutrients and supplements etc. Inclusion of probiotic bacteria and probiotic supplements in various food systems has also become very popular and this is becoming a very vital sector in functional food market. Systematic RandD efforts are, therefore, required to develop health promoting foods for all segments of the society at affordable cost. Prior to promoting the developed health foods, it is of utmost importance to conduct clinical trials to ascertain safety and efficacy, and also establish appropriate regulatory framework for their distribution to masses. All these issues have been discussed in this paper and recommendations were drawn to formulate future research.

Abstract

Microencapsulation has found great applications in food business. However, the technology remains aloof from being fully exploited. Microcapsules offer food processors a way to shield sensitive food ingredients, mask or preserve flavours and aromas and conversion of volatile food components into easy-handled solid ingredients (like powders, capsules etc). A number of naturally occurring and synthetic polymeric materials have been identified so far that possess the entrapping property and are categorised as GRAS materials. Numerous techniques have been developed for using these entrapping materials to encapsulate the sensitive food ingredients. Controlled release of the food ingredients at proper place and right time could be therefore a key practicality that may be provided by microencapsulation. With strictly fine-tuned and stabilized release characteristic, this method adds worth to the merchandise. The areas of interest in this field include the development of alternative and inexpensive polymers that may be considered natural or mimic the properties of natural polymeric materials, like Gum Arabic, Gellan Gum, Gum Karaya, Gaur Gum and Gum Acacia. Limitations in many of the encapsulation techniques have occurred due to high value of raw materials and production. This review is effectively committed to the, properties of encapsulating agents along with the emphasis on different techniques used for encapsulation in the varied fields like food technology, pharmaceutical, commercial engineering and biotechnology.

ABSTRACT

This paper is an attempt to highlight the problems of coastal environmental impact assessment owing to logistic constraints, costs of analytical data generation, time gap between data generation and interpretation, quantum of physical and chemical data required for assessment of environmental data through conventional methods and to examine the potential of hyperspectral remote sensing as an alternative for conventional methods. As hyperspectral remote sensing is non-destructive, offers repetitivity and high resolution (spatial and spectral) and hyper-sensitive to many physical and chemical properties of coastal soils and minerals, we recommend use of hyperspectral remote sensing for reduction of cost and man-hours in coastal environmental assessment, without compromising the quality of data.

ABSTRACT

Remote Sensing and Geographical Information System play major role in the water planning of river basins. Varahanadhi is one of the 17 major river basins of Tamilnadu, bounded in North by Palar basin, East by Bay of Bengal and West & South by Ponnaiyar basin. It drains through Thiruvannamalai and Villupuram districts. There are three sub basins viz., Ongur, Nallavur and Varahanadhi sub basins. From Survey of India top sheets, Basin boundary, sub basin boundary maps were generated. Administrative map with district, block boundaries was prepared. GIS software - Arc view, was utilized for this purpose. By using ERDAS IMAGINE, Digital Image processing software, satellite image mosaic of Varahanadhi Basin, Geomorphology, Land use, Wasteland, Structural-Lineament maps were generated. IRS P 6 RESOURCESAT, LISS III and PAN data were used for the thematic map preparation. From the collateral data collected, the thematic maps on Geology, Soil, and annual north east, south west. summer, winter rainfall, irrigation system, pre monsoon and post monsoon groundwater levels, ground water quality were prepared using ARC GIS Software. Relief and Drainage map were also generated in GIS environment. The surface water potential was assessed by rainfall run off method for which geomorphology map interpreted by remote sensing and GIS was utilized. Based on geomorphology and land use maps, draft for irrigation was estimated. Geology, geomorphology, depth to bedrock, rainfall pattern, water level maps were used

to asses groundwater potential and draft. Sectoral demand on power, industry and domestic were made based on collected collateral data. Environmental Impact Assessment was assessed using land use maps and ground water quality maps interpreted from remote sensing data for years 1998 and 2004 were prepared and compared. Wasteland map was prepared to know the extent of wastelands and their types as per National Waste Land Board norms. Remedial measures to convert waste lands into productive lands were also suggested. By superimposing geomorphology and lineament maps upon the wastelands, sites suitable for groundwater development in the waste lands were identified. In the same way by using GIS overlay analysis developmental and action plan maps were also prepared with technical recommendations. By applying remote sensing and GIS techniques the basin water resources assessment, draft to meet out sectoral demands and balance of water available for future use can be decided. Varaganadhi basin is a surplus basin as per the study.

ABSTRACT

Synthetic Aperture Radar (SAR) images are being used more extensively than ever before for geosciences Applications in the moist tropics. With SAR's side viewing geometry, longer wavelengths, and almost all-weather sensing capability, SAR imagery has been extensively useful mapping tool for coastal geomorphology in the moist tropics. The purpose of this study to assess the use of Multitemporal C-band ENVISAT- ASAR data for identification of different coastal geomorphology in part of Tamilnadu coast. The orbital ASAR data was digitally geometric corrected (ortho-rectified) and filtered for speckle noise, and linearly stretched in order to enhance contrast between the coastal environment features. By using the methods of crisp enhancement, linear stretching and PCA, to show the various Coastal geomorphological units. The information extraction is based on recognition of the mechanism interactions occurring between radar signal and the target on the ground, represented by shallow water morphology in the intertidal conditions, coastal dunes, mangroves, marshes and highland. In an application perspective, Orbital ASAR data proved to be a fundamental source of information for both geomorphological mapping and land use pattern in moist tropical environments.

Key Words : ASAR, Geomorphology, Mangroves, Land Cover, Coastal mapping.

Cycads refer a group of plants belonging to the families Cycadaceae, Stangeriaceae and Zamiaceae as per recent classification. They belong to a specialized group of plants having ancient linkage. These are the most primitive of living gymnosperms and most ancient of all plants surviving today. Present day Cycads are mere remnants of numerous massive sorts that flourished during the end of Triassic era and belong to the Jurassic period.

Cycads include 11 genera and nearly 300 species distributed in the tropical, subtropical and warm temperate regions of the world. Substantial number of species is found in South Africa, Australia, South America, Central America, Caribbean Islands and Asia. There are natural hybrids also as reported from South Africa and Australia. Horticultural Importance

Cycads are curious and interesting both botanically and horticulturally all over the world. Their evergreen plam-like appearance with arching leaves from the crown looks graceful and ornamental. They are often mistaken with palm and tree ferns due to their structural similiraity. The distinctive forms emerged out of non-conventional stems and evergreen foliage is the main attraction. Primitive shapes of the Cycads are appealing to the landscapers. They are extensively used as a pot plant for indoor decoration and outdoor gardening. As Bonsai, Cycads exhibit a new style and formation. In horticultural trade, Cycads are in great demand and having high commercial value. Nowadays, a grown up specimen in large sized pot, may fetch several thousand rupees as price, which is very high in comparison to the other indoor plants. This is because of rarity, slow growing nature and graceful appearance of the cycads. Even the cut-leaves are in huge demand for various floral arrangements and decoration purpose. Therefore, Cycads are horticulturally very important and an essential component of present day landscaping. Selection of Plants

Airports are important place and points for mass transportation. Lot of public movement, especially higher class, takes place on way to their journey to different destinations. Usually all airports have good architectural structure and utilitarian facilities. As a general practice, good gardens are also maintained around the airport and approach roads besides interior plantscape.

Purpose

The main purpose of developing gardens around airport is to create scenic beauty by using different kinds of ornamentals besides attractive features. In addition, plantation around the airport premises helps in temperature reduction, minimizes dust load, and above all, provides a soothing atmosphere.

Categorization of Areas

Airports are generally laid out in huge areas having many entry and exit points. There are several main roads, connecting roads, parking lots, bus stop, metro rail station etc. Additionally, airports usually have huge indoor areas under cover. Therefore, a broad categorization of the areas is needed for proper planning of landscape and interior plantscaping, as follows.

In urban areas, there are spaces along the roads which can be beautified by planting various groups of plants by proper planning. In addition to that, there are large traffic islands in metropolitan cites which are ideal for developing gardens. Even narrow central verge of the two way roads provide ample scope for plantation. These kinds of plantations sometimes in the form of gardens are very useful and fulfill dual purposes - beautification and amelioration of environment.

Roadside Gardens

Scope - Vacant areas along both sides of the metal roads in semi-urban and urban places are ideal for plantation. Depending upon the space available, trees and shrubs can be planted in various ways.

Advances in analyticalchemistry and instrumentalanalytical chemistry in the pastfew decades have significantlyimproved, makingelemental determinations in soil extracts and water samples easier, faster and less challenging for the analyst. For most of the elemental analysis procedures, the more traditional wet chemistryprocedures havebeenreplaced byvarious analytical instrumental procedures that employ either emission or absorption spectrophotometry. The elemental concentration in prepared soil extracts and water samples can be determined by a number of instrumentalanalyticalprocedures.

The trend today is toward greater analytical sophistication, to multielement computer controlled analytical instrumentation, resulting in a less ended understandingof the analytical principlesinvolved, and “black box” concepts of instrument calibration, maintenance, and operation. Preparation of the analyte and suitable adaptation for a method of analysis requires an understanding, by the analyst, of the principle of the method as well as its requirements and limitations. Adequate testing is usually required before putting the method to use, following procedures such as those that have been adapted by the Association of Official Analytical Chemists (AOAC).

It is not possible to cover in adequatedetail every method of analysissuitedfor the elemental concentration determination in soil extracts and water samples. Therefore, the objective here is to provide sufficient background information about the instrumentalprinciples to guide the reader.

The intervarietal chromosome substitution lines of wheat (T. aestivum) are utilized to study the effects of individual whole chromosome/s on agronomic characters of interest to improve crop plants to be selected for preferred traits (Law and Worland 1973). The common method to develop subsitutiion lines involves development of monosomics lines first of that variety which are used later as recipient variety or recurrent parent for substitution. Presently monosomic lines of several wheat varieties are available. However, the development of substitution lines for a specific chromosome by using monosomics sometimes may be erroroneus due replacement of specific monosome by another one of the 21 chromosome set from the donor to the recipient and consequently monosomic becomes monosomic for another chromosome or a recombined chromosome (univalent shift.). Therefore, to maintainand confirmthe identityof a chromosome involved in monosomy are tagged with either genetic marker/s or confirmed cytologically or with the help of molecular markers.

7.1 Determination of Hydraulic Conductivity of Saturated Soil Laboratory Methods

Hydraulic conductivity of a saturated soil indicates the ease with which water is transmitted through the soil pores. If a constant water head (h) is maintained on a saturated soil column of length (L) and the volume of water (V) percolating per unit time (t) through per unit cross sectional area (A) to the other end, then according to Darcy’s Law, the rate of flow of liquid or flux (q) is proportional to the hydraulic gradient (ÄH/L) across the length of soil column.

The total energy of a molecule consists of translation, vibrational, rotational and electronic energies. Transition among different types of energy levels occurs in different regions of electromagnetic spectrum. Transitions between rotational and vibrational energy levels of the ground state molecules give rise to absorption bands throughout the infrared region of the electromagnetic spectrum. Organic molecules are characterized by possessing bonds and groups that vibrate independently of each other. Thus, initially infrared spectrometry was used for identification of functional groups of organic molecules. There is lot of ambiguity in the interpretation of infrared spectra of organic matter preparations due to complexity and diversity of the components of soil organic matter. But if used carefully it can provide information on: (i) nature, reactivity and structural arrangement of oxygen-containing functional groups, (ii) presence of protein and carbohydrate constituents, (iii) presence or absence of inorganic impurities (metallic ions, clays, etc in humic fractions), (iv) the amount of different soil organic matter components, and (v) interaction of organic components with pesticides, herbicides, fertilizers, etc.

On the contrary to organic molecules, minerals tend to have few isolated vibrating groups. It can be used for mineralogical analysis when used in conjunction with x-ray diffraction and other similar techniques.

Infrared spectrometry is used in the identification of inorganic compounds including minerals which have well-defined absorption bands in determining- (i) whetherlayer silicate isdioctahedral or trioctahedral in composition, (ii) in studying isomorphous substitution, (iii) hydration of minerals, and (iv) in quantitative analysis. Infrared spectrometer provides information about nature and identify of inorganic compounds that are amorphous in x-ray diffraction analysis.

21.1 Determination of Total Nitrogen in Soil (Modified Kjeldahl Method)

Nitrogen mostly present in soil in organic form. Relatively small amount of nitrogen usually occurs in ammonium and nitrate form, the available form. The Kjeldahl method of total N determination includes both organic and ammonium forms and with modification nitrate form of N can also be included.

Principle

When soil is digested with concentrated sulphuric acid organic nitrogen is converted to ammonium sulphate. To speed up the reaction a digestion mixture composed of sodium (or potassium) sulphate (to raise the boiling point of H₂SO₄) and cupric sulphate (CuSO₄) - selenium powder (catalyst) is used.

23.1 Forms of Soil K

Ignoring potassium (K) in soilorganism, total K in soilmaybe classified as (i) water soluble K, (ii) readily exchangeable K (exchangeable K), (iii) slowly exchangeable K (non- exchangeable or fixedK) and (iv) mineral or lattice K. Thedifferentforms are in dynamic equilibrium with one another.

Rice is the most important crop in India occupying about 43.7 million hectares area with a production of 136.5 million tonnes (rough rice/ paddy). As the human population is increasing, so is the demand for rice, yet yields of the crop are leveling out. At present, the rice yield in India is 3.12 t/ha as against the world average of 4.11 t/ha. Not only this, the rice yield in India is exactly half than that of China (6.26 t/ha). The World Development Report 2008 predicts that cereal production would have to increase by 50% by 2030 to meet the escalating worldwide demand. The additional rice for increasing population will have to be produced on less land with less water, less labour, and reduced inputs.The major constraint in rice production in India is the lack of suitable crop management practices and sufficient irrigation facilities. The water crisis is threatening the sustainability of the irrigated rice system and food security in many parts of the world. Despite efforts on a variety of fronts, including genetic engineering of rice strains for improved yield and nutrition, no concrete solution has been found yet. There is a challenge to develop novel technologies and production systems that allow rice production to be maintained or increased in the face of declining water availability. To produce 1 kg of grain, farmers have to put 2 to 3 times more water in rice fields than in those growing other cereals.

The increasing water need for agriculture poses a potential threat to natural water resources and climatic change scenarios in the near future. The great challenge will be to increase food production with less water, particularly in countries with limited water and land resources, by promoting techniques and cropping systems of higher water-use efficiency (WUE).There is also much evidence that water scarcity already prevails in rice-growing areas in India, where rice farmers need technologies to cope with water shortage and ways must be sought to grow rice with less water.The farmers, especially those, who are resource-poor, are losing interest in rice cultivation as its profitability is declining with the rise in input costs. But, system of rice intensification (SRI) and aerobic rice culture appear to be a viable alternative of rice cultivation that may save the expensive inputs, improve soil health/ quality and protect the environment substantially.

The solanaceous group of vegetables (tomato, eggplant, chili and bell peppers) generally take up large amounts of nutrients. The amount of nutrients they take up depends on the quantity of fruit and dry matter they produce, which in turn is influenced by a number of genetic and environmental variables. Tomato (Solanum lycopersicum L.) known as Tamatar in Hindi is one of the most popular and widely grown vegetables in the world ranking second in importance to potato in many countries. Tomato is widely grown in almost all parts of India and is adapted to wide range of soil and climate conditions. Tomato is consumed either as raw or cooked and is also very important crop for processing in the form of soups, juice, ketchup, puree, paste and powder. Tomato adds variety of colours and flavour to food.

Tomato is very well known for its nutritive value. Attractive red colour is due to lycopene pigment, pink and yellow colours are due to presence of anthocyanin and carotene pigments. Tomato is rich source of ascorbic acid, which varies from 15-31 mg per 100 g of fresh weight. Tomato also provides minerals like calcium, iron, magnesium, phosphorus and sodium. Tomato is also rich in medicinal value. The pulp and juice is digestible, promoter of gastric secretion and blood purifier. It is also considered to be intestinal antiseptic. It is one of the richest vegetables, which keeps our stomach and intestine in good condition.

Mechanization is viewed as package of technology to increase land productivity by improved timeliness of operations, reduced crop losses and improved quality of agro-produce to increase efficiency of inputs used through their efficient measurement and placement, to increase labour productivity by using labour saving and drudgery reducing devices and reduce cost of cultivation. echnology and machinery enhanced the ability, quality, accuracy and efficiency of the human being. By using technology in any field the rate production and quality automatically increases. The country witnessed unprecedented growth in agriculture which has helped India to graduate from hunger to self sufficiency in food grains by increasing the food grain production from 51 million tonnes to 208 million tones. The estimated contributions of improved agricultural tools and equipment in augmenting total food production of India is encouraging; savings in seeds: 15-20%; savings in fertilizers: 15-20%; savings in time: 20-30%; reduction in labour: 20-30%; increase in cropping intensity: 5-20%, and increase in productivity 10-15 per cent. The major issues before Indian agriculture with respect to mechanization are; tractorization vs mechanization, custom hiring and contract farming, horticultural mechanization, effective extension activity, sugarcane mechanization, hill agriculture and industry institution interaction. The main technologies which can be taken to farmers’ field for enhancing productivity and production Aqua-ferti seed drill, two row powered seeder, okra planter, tractor mounted inclined plate planter, tractor mounted rotary tiller (Rotavator), tractor mounted zero-till drill, tractor mounted raised bed planter, tractor mounted sett cutter planter for sugarcane, pneumatic planter, vegetable transplanter, low land manual rice seeder, self-propelled rice transplanted, self-propelled power weeder, tractor operated aero blast sprayer, tractor mounted vertical conveyor reaper, maize dehusker-cum-sheller, tractor operated straw reaper (combine) and tractor operated fodder harvester. These technologies need to be introduced after necessary modifications and adjustments, depending upon the agroclimatic and terrain and soil conditions, through proper mode e.g. as individual /group ownership, on custom hiring basis or mechanization package for contract farming.

Lac insect is an insect of commercial importance like silk worm and honey bee. The silkworm produces silk, honeybee produces honey and wax whereas, lac insect produces three products namely resin, dye and wax of great commercial importance. The resin commonly called lac, is only one of animal origin and commercially available in the market as shellac or seed lac or as a button lac. The resin is in fact the hardened secretory product of lac insect secreted as a protective covering of an insect. Lac culture is one of the important sources of livelihood and rural economy for poor resource constraint people particularly inhabiting in forest and sub-forest areas. It is one of the important sources of livelihood security in many parts of the country in states like Jharkhand, Chhattisgarh, Madhya Pradesh, West Bengal, Odisha, Maharashtra, Madhya Pradesh, Uttar Pradesh, Assam, NE regions etc (Pal et al., 2007). It has also high potential for generating employment for both men and women in forest and sub-forest areas of the country. It is a very remunerative crop, paying high economic returns to the farmers and also foreign exchange for the country through its export.

Introduction

Three hundred million poor people in Asia depend on livestock for their livelihoods and there are opportunities for improvement in livestock related livelihoods due to the rapid and dynamic changes that the livestock sector in Asia is undergoing (Njuki et al. 2010). Piggery farming has been recognized as one of the profitable venture among the rural masses. This venture has proved to be one of the most important livelihood option. Generally the pigs are reared for pork, considering the increasing trend of pork consumers in India; Piggery farming will certainly take a industrial form of livelihood in India in future. There are more than 12.8 million pigs in our country, out of which approximately 14.5% are graded and of exotic variety. There are 120 pig breeding farms in the country whereas pigs of exotic breeds are maintained. China ranks first in the world in pig rearing where number is around 300 million or 1/3 of the world pig population.Pig production is basically an enterprise which is able to convert inedible or inferior quality food into the food rich in animal protein. Pig is considered a machine because they convert grain, pasture and other low quality feed into Pork which is used as human food (Rahman, 2008) . Despite the fact that pig rearing is a profitable enterprise most of the progressive farmers even today hesitate to adopt it due to prejudice sentiments in our society against pig farming. For many others there is religious taboo against pig. A majority of meat eaters also and cheap source of protein. Pork as a source of animal protein is gaining popularity in India and pork products will be in greater demands in years to come. The high carcass yield attracts the farmers because of the better returns within the shortest possible time. High fertility in pigs assumes income to the rearer round the year. To bring about improvement in the productivity of pork and other piggery products extensive crossbreeding programme has been taken up to develop animals of large size, better feed conversion efficiency, high dressing percentage and better quality pork. Pig keeping also contributes to socio-cultural obligations and risk diversification and converts existing resources and low value waste products into high-value animal source food for home consumption and/or sale (NEPED, 2008).

1. INTRODUCTION

India is traditionally rich on agricultural knowledge. Presently modern farming is not sustainable in consonance with economics, ecology, equity, energy and socio–cultural dimensions. Indiscriminate use of chemical fertilizers, herbicides and pesticides to boost the yields have resulted in various environmental and health hazards along with socio–economic problems. The agricultural production has continued to increase, but the trend in productivity has started declining. The agricultural scientist’s and farming community whole heartedly aim at an alternative sustainable farming system which will be ecologically sound, economically viable and socially acceptable. The answer to the problem lies in refining our own traditional practices based on natural and organic farming methods offering several safe, feasible and cost effective solutions.

The term ‘Organic farming’, a system of farming is one which avoids synthetic fertilizers but rely upon crop rotation also using crop residues, animal manures, legumes, green manures, biofertilizers, organic wastes etc., to maintain the soil fertility and increase productivity. This system enables the nutrients leaching from perennial wood and vegetation and help to maintain organic matter and protect the soil from surface erosion. The world wide awareness for adopting organic farming has paved way for streamlining the production technology and certification by adopting the specified crop production practices. Organic farming practices in agriculture and animal husbandry are native to East Asian countries, like India and China. In China a strong national movement for animal waste recycling is in vogue, minimizing the use of inorganic fertilizers (Xu, 2000), while in our country specific crop production practices are developed in isolation and adopted locally.

The trend of use of chemicals and industrial inputs in intensive farming is increasing which resulted in soil health deterioration and increased environmental pollution which causes a great concern all over the world. Therefore an emphasis on the need to use the organics and other byproducts of agriculture and industry is emerging. Fortunately, the country is already rich with left over crop residues (185 million tonnes) but its use presently is limited. Apart from crop residues, there is an enormous quantity of cattle wastes out of which sixty per cent of the used for fuel purpose in rural areas.

1. INTRODUCTION

Plant diseases are major constraints to plant growth and development (from seed to maturity) resulting in crop losses. Plants are exposed to attack, by a wide variety of microbes like bacteria, virus, fungi, phytoplasma and as an abnormality they cause disease. To counter these threats, plants have evolved a series of defense systems in response to the pathogen challenge inhibiting natural resistance. Thus disease is an exception rather than rule. However on failure of the inbuilt resistance mechanism, outbreak of disease has led to the widespread use of chemicals that have deleterious environmental and human health consequences. To enable the development of more effective and durable resistance against pathogens, a detailed analysis is necessary to identify the genes and mechanisms involved in plant defense/resistance.

Recombinant DNA and gene transformation technologies have potential to augment traditional breeding efforts (limited by genetic variability) by circumventing taxonomic limitations to gene pool for pathogen resistance. Further manipulation of defense genes in transgenic plants provide novel approaches for engineering pathogen resistance. It becomes important to understand the different components of plant defense to exploit host plants for resistance Thus the review is focused on plant genes and proteins that are known to play a major role in plant resistant against pathogens.

Organic farming primarily aimed at cultivating the land and raising crops in such a way so as to keep the soil alive and in good health by use of organic wastes and beneficial microbes. Organic farming is performed with an intension for maintaining diversity of crops, keeping soil healthy for future years, producing high quality products and recycling nutrients. Unlike modern agriculture, organic farming is not depended on synthetic chemicals. Instead, it depends on natural products to boost soil fertility through microbial activity. Organic farming uses a multiple cropping system, which benefits from growing several crops. This crop diversity supports a range of plants, insects, soil micro-organisms and animals that add to a healthy farming system. Organic farmings are of different types such as bio-farming, nature farming, eco-farming and biodynamic farming. Organic agriculture is developed with concented efforts by various people to create the symbiotic relationship between the nature and man. In the present day, organic agriculture has shown potentiality in commercial, social and environmental sector.

Organic farming is a production management system, which promotes agro-ecosystem and agrobiodiversity. The objective of organic farming is to generate all the required plant nutrients inside the farm and adopt crop protection using local resources. Organic farming emphasizes on the use of farm yard manure, crop residues, composts, vermi-compost and bio-fertilizers to enrich soil fertility and use of bio-control measures to manage insect and diseases. In particular, organic agriculture is intended to produce high quality, nutritious food which helps in preventive health care. Organic farming increases biodiversity at every level i.e. from micro-organism to mammals. It strengthens biodiversity by using bio-pesticides and inorganic fertilizers.

Introduction

It is obvious beyond doubt that the climate is changing. Climate has also been changing in the past, but its rate of change has been unprecedented in recent past years. It is true that no one could stop the climate from changing, but could do a lot for mitigating some of its effects and formulate adaptation mechanisms to it. Agriculture, especially the small holder producers have been at the receiving end of the climate change effects, resulting into not only in the fluctuating and unstable productivity, loss of natural resources and consequent livelihoods, but also to their survival.

Climate change and food insecurity are two most pressing challenges human beings are facing today and has emerged as the biggest twin challenge of this century. There are evidences that the increase in greenhouse gases caused by human activities is responsible for global warming and consequent climate change (FAO, 2007). Under the six emissions scenarios the global average surface temperatures are expected to increase by 1.1°C - 6.4°C this century [IPCC, 2007]. Climate change has its impact on almost everything on the earth and so on the food production. The agriculture plays a very important role in the economy of most of the nations of the developing world. For India, agriculture is the base of nation’s economy, largely rainfed and dominated by smallholders (Singh 2008 and 2010). As per reports from a number of governments, non-government and intergovernmental organizations, the countries and agriculture especially practiced by smallholders are particularly vulnerable to climatic changes and they have least capacity to adapt to these changes. In most of the developing countries of the world, the agriculture is not merely a matter of cultural practice but it is the source of livelihoods of millions of smallholders and their dependents. Changing climate as predicted will not only affect the agricultural productivity but also heavily hit the lives and livelihoods of the smallholder families and ultimately lead to food insecurity to the concerned nation and the world (Singh et al. 2012). Business-as-usual scenarios of population growth and food consumption patterns indicate that agricultural production will need to increase by 70 percent by 2050 to meet global demand for food. South-Asian countries made tremendous progress in food production in 1960s, 1970s and 1980s. with an impressive growth of food production, India, Pakistan, Bangladesh and Nepal transformed themselves from countries with a chronic food deficit to countries that were almost self sufficient in early 1990s. Except Afghanistan, all these countries had exported some quantities of food grain in late 1990s. The dynamic growth in the agriculture sector has, however, recently been lost. Productivity of major food grains has slowed and has been decline for some crops (Kumar et al. 2008) with food production failing to keep pace with population growth (G. Rasul and A. Schild 2009). As a result, South-Asian countries are now finding it difficult to meet their population most basic food and nutritional needs and remain vulnerable to food insecurity (Tab.1).

Introduction

The challenge of increased food production to meet food security needs still persists 50 years after the start of the Green Revolution as population growth continues to increase in many developing countries. There appears to be no alternative but to increase agricultural productivity and the associated individual factor productivities (such as water, labor, nutrients, energy and capital) to meet the food demand by 2050 and to alleviate poverty and hunger. Thus, needs technological initiatives for further agricultural intensification. But already happening negative effect of crop production intensification on essential natural resources such as soil, water, biodiversity, and associated ecosystem services has forced agriculture stakeholders to search for novel initiatives that focus on sustainable production optimization rather than just intensification. Furthermore increased food supply is a necessity though not sufficient for eliminating hunger and poverty. What is important is who produces the food, has access to the technology and knowledge to produce it, and has the purchasing power to acquire it. Of the developing world’s 5.5 billion people, 3 billion live in rural areas – nearly half of humanity. Of these rural inhabitants, an estimated 2.5 billion are in households involved in agriculture, and 1.5 billion are in smallholder households (World Bank, 2008 and Herren, 2010). Poor farmers need low-cost and readily available technologies and practices to increase local food production and to raise their income. At the same time, land and water degradation is increasingly posing a threat to food security and the livelihoods of rural people who generally live on degradation-prone lands. There are several other key issues while relating the situation to Indian context.

Indian agriculture has the challenge of providing national as well as household food and nutritional security to its ever increasing population with the average size of land holdings shrinking due to increasing fragmentation. Modern agriculture is facing multiple challenges of plateauing genetic potential of major crops, declining productivity in vast tracts of rainfed/ dryland areas, ill-effects of green revolution technologies in all intensively cultivated areas, climatic aberrations etc., which is threatening the sustainability of the important agricultural production systems and national food security. The assets of a small and marginal farmer is of various kinds – a small piece of land, a homestead garden, few chickens and ducks, 1 or 2 cows/pig etc which has to be managed judiciously to sustain the production productivity and livelihood of the farmer. Farmers take decisions as to crop and livestock management given their access to knowledge and information, personal circumstances, and in the context of the broader socioeconomic, institutional and political environment. Under such conditions, some farmers are painstakingly trying to make a livelihood out of their small pieces of land. However, unable to produce sufficiently, some have sold off or leased out their land to big commercial farmers. Such farmers have become a daily labour or shared cropper in their own land, or even migrated to cities in search of livelihood.

To overcome the problems of small resource poor farmers under diverse and risk prone environments a more holistic, resource based, client oriented and interacting approach, popularly known as Integrated Farming System (IFS) has been developed. This system defines output as total biomass outcome of the system. Integrated farming system is a reliable way of obtaining high productivity with substantial nutrient economy in combination with maximum compatibility and replenishment of organic matter by way of effective recycling of organic residues/wastes etc. obtained through integration of various land- based enterprises.

Body needs oxygen to oxidise the food nutrients and derive energy. In this process carbon dioxide is produced in the body, which is toxic and must be removed quickly and efficiently. The oxygen utilization & carbon dioxide production takes place within the mitochondrion of cells of the various tissues. The transport of O2 and CO2 to and from the cells of various tissue is done by the blood. But the actual uptake of oxygen from the air and discharge of CO2 into the environment takes place at the level of lungs. This exchange of O2 and CO2 between the organism and the environment is defined as respiration. Air is moved in and out of the lungs by their bellows action (ventilation). It is then distributed within each lung, so that alveoli are adequately ventilated and also perfused by the blood.

Oxygen and carbon dioxide are then exchanged between the gas mixture in the alveoli and the blood in the pulmonary capillaries (gas transfer). The gases are then transported in the blood to the tissue.

Before the turn of present century, it was considered that carbohydrates, fats, proteins and minerals were sufficient for fulfilling the nutritional needs of animals. Later it was recognised that several other factors also need to be provided in the diet in small quantities, the absence of which resulted in diseases like beriberi, scurvy, pellagra and rickets. Funk in 1912 proposed the term vitamine for such factors, vita for being essential and amine because these factors were thought to be amines in chemical structure. Later it was discovered that not all such factors were amines, hence the last ‘e’ from the word vitamine was dropped.

The quantities of vitamins needed by the body are small, in the range of milligrams or micrograms. For this reason these compounds are also known as accessory foodstuffs. Thus vitamins came to be regarded as essential dietary factors which are required by an organism in small quantities and whose absence results in deficiency diseases. Many of these vitamins acts as coenzymes in important metabolic reactions of the body.

The vitamins have been broadly classified on the basis of their solubility. Fat soluble vitamins - A, D, E and K. Water soluble vitamins- B complex and C. This classification has proved useful from the functional point of view also for an extended period of time and is now an established classification scheme. The water soluble vitamins cannot be stored in the body over extended periods of time during periods of opulence and used during periods of scarcity.

Most vitamins cannot be synthesized by the body hence the need for dietary supplement. However, ruminants, have an advantage in that the rumen microorganisms can manufacture most of the B-complex vitamins which are utilized and required by the animal. Vitamin C is required only by human beings and guinea pig, hence is not of importance as a dietary ingredient for the domestic animals. Most other animals are able to synthesize adequate amounts of vitamin C required by them. The site of synthesis of vitamin C is not well established but it seems that the intestinal tract, liver and adrenal glands are actively involved.

At this stage it should be clarified about the dietary and physiological requirements. All vitamins are physiologically required by the domestic animals but only a few are required to be a essential dietary ingredient.

Planning is the beginning of all the other processes of management, namely, organizing, staffing, directing, communicating and controlling.

Planning is deciding in advance what to do, how to do, when to do and who is to do it. Planning bridges the gap from ‘where we are’ to ‘where we want to go’ (Koontz and O’Donnell).

In the words of Theo Haimann, “Planning is the function that determines in advance what should be done". It consists of selecting the objectives, policies, programmes and procedures of the enterprise and also the means of achieving their objectives.

As a part of planning process, the manager has to ensure that his team members understand the purposes and objectives of his enterprise and also methods to achieve them.

A Hospital Management System not only provides an opportunity to the hospital to enhance their patient care but can also increase the profitability of the organization. These kinds of applications enable hospitals and doctors to serve their patients better. Computers are being extensively used for routine administrative purposes by health care professionals.

In veterinary medicine, hospital management software is designed for all types of practices, ranging from small, single-vet ones to large ones with multiple locations and vets, and covers a wide range of hospital administration and management processes. It is an integrated end–to-end management system that provides relevant information across the hospital to support effective decision making for patient care, administration & critical financial accounting in a seamless flow. Specific areas of application include scheduling of appointments, registration of cases including client and patient data, case history and electronic medical records, health care reports, reminders, inventory controls, reports and accounting.

There is a range of thermal conditions within which animals are able to maintain a relatively stable body temperature by means of behavioral and physiological means. Heat stress results from the animal?s inability to dissipate sufficient heat to maintain homeothermy. High ambient temperature, relative humidity and radiant energy compromise the ability of animals to dissipate heat. As a result, there is an increase in body temperature, which in turn initiates compensatory and adaptive mechanisms to re-establish homeothermy and homeostasis. These readjustments, generally referred to as adaptations, may be favorable or unfavorable to economic interests of humans, but are essential for survival of the animal. Thus, an increase in air temperature, such as that expected in different scenarios of climate change, would affect directly animal performance by affecting animal heat balance. Potential direct and indirect impacts of climate change on livestock production have not been thoroughly explored. Changes in crop availability and quality, which have been the primary focus of previous studies, affect animal production through changes in feed supplies. Analyses of direct impacts of climate change on livestock production are few. Changes in climate would directly lead to reductions in summer season milk production and conception rates in dairy cows. Because voluntary feed intake (VFI) is the primary factor influencing the production capacity of livestock, accurate prediction of the feed consumption of livestock under heat stress is a precursor to accurate assessment of changes in production resulting from changes to a warmer climate. Quantification of potential impacts of climate change on livestock production allows producers to gain a better understanding of the magnitude of the changes in production levels faced under climate change. Projected economic losses resulting from temperature-induced reductions in production may justify mitigation of these temperature increases through changes in management practices, such as installation of shades or sprinklers in feedlots or evaporative cooling of barns. With severe economic losses predicted in livestock as a result of climate change, it?s very essential to understand the different intricacies of climate and its impact on livestock production. This will help us to prepare ourselves better for ameliorating the adverse impact of weather parameters on animal production. This will intern prevent the severe economic losses incurred in livestock industry as a result of changing climate.

All animals have a range of ambient environmental temperatures termed as thermo-neutral zone. This is the range of temperatures that are conducive to health, performance and well-being. The upper critical temperature is the point at which heat stress begins to affect the animal adversely. There are a number of climatic factors like temperature, humidity, wind speed and radiant energy/sunlight that influence the degree of heat stress. Heat is also produced by metabolism within the body, which includes maintenance, growth and production. Heat production is affected by body weight, species and breed, level of production, level of feed intake, feed quality and, to a lesser extent, by the amount of activity and exercise. Excluding temperature of the air ventilating the house, heat is also added from the roof and walls. Heat stress can be defined as the point where the animal cannot dissipate adequate quantity of heat to maintain body thermal balance. During the periods of heat stress, most of the productive energy is diverted to thermoregulatory adaptations that results into decreased weight gain, poor immunity, oxidative stress predisposing animals to various infectious diseases and high mortality rates. In order to characterize and quantify thermal comfort zones according to animal species, several thermal comfort indices or heat stress indices were developed.

The primary focus for livestock and poultry has been on heat stress indices to provide guidelines for environmental management and risk assessment for losses through linkages with physiological responses (Eigenberg et al., 2005) or performance (Baccari, 2001). The linkage is based on observations of a selected performance criterion (e.g., growth, milk or egg production) made concurrently with measures of the warm environment. These serve as inputs for the selected heat stress index and thus an empirical relationship can be developed which is termed as ?biological response function?. These indices recognize the ability of the animal to cope with environmental stressors by adjusting physiologically, behaviourally and immunologically to minimize adverse effects or even compensate for reduced growth and production performance during moderate environmental challenges. When the intensity and duration of potential stressors exceed thresholds, coupled with limited opportunity for recovery, animals are unable to cope and therefore are affected adversely. Nevertheless, the heat stress indices have served as useful surrogates for the complex interactions between the physical and biological components (Hahn et al., 2003).

Livestock rearing is central to livelihoods and survival of millions of people of India. It is estimated that approximately 100 million people derive their livelihood from livestock rearing as primary or secondary source of income. Livestock related activities help to maintain regular in flow of income for these households. Small farmers in India generate nearly half of their income from livestock and the value of cattle represents a significant part of their wealth, so the death of cattle poses a significant risk and affects farmers? net worth and income.

Type of Risks to Livestock based Livelihoods

Large animals are expensive and thus carry higher risk exposure. These risks are in form of losses due to the disease, accident, theft, natural calamity which can cause significant losses to these households. Sometimes owners are forced to sell their animals due to incurable disease/ disorder/ fodder and water scarcity and later they are unable to rebuild their stock. Many times animal losses force them into poverty trap from where they are unable to recover.

Abstract

Landslides have become a recurring phenomenon in most of the mountainous regions of the world. In Indian peninsular, the landslides which were mostly confined to the tectonically active Himalayan Mountains once, have started spreading over to the other mountain belts of the Peninsula. The Tirumala – Tirupati hills, which is drawing millions of pilgrims from all over the world is facing landslides especially along the newly built southern uphill ghat road. The geology of the area, studied using Geomatics tools like Remote Sensing, SRTM based Digital Elevation Models, GPS Survey, etc., showed that Tirumala hills is under the grip of upward tectonic movements as evidenced from the N-S and E-W oriented Pleistocene faults, intensely dissected Plateau top Cuddapah Quartzites, retreating escarpments, exhaustive debris slope, extensive valley fills along the slopes, colluvial fills in lower slopes, palaeo debris flows along the southern and western obsequent slopes of the Tirumala hills etc. All these indicate the inherent landslide vulnerability of the slopes. The E-W trending dykes which are piercing the slopes and protruding as ridges add further landslide vulnerability to such fragile slopes. So, the new ghat road laid along such southern slope is obviously facing landslides. However, the detailed Geomatics based studies show that the dykes, valley fills and steep slopes are particularly more vulnerable to landslides. Though remedial measures have been broadly evolved, abandoning the southern uphill new ghat road and widening the older northern downhill ghat road seems to be the better and long term feasible alternative to prevent Landslides in the area.

Abstract

Northeastern part of the Indian subcontinent is seismically an active region, and is further prone to excessive rainfall and frequent landslides, which cause disruption of the road networks during the monsoonic months every year. The region owns a typical morphotectonic setup where many active thrusts and faults have carved out the landforms and physiography of the major part of the region. The creeping phenomenon of the N-S trending prominent strike-slip fault, namely the Churachandpur - Mao Fault (CMF), is one of the triggering factors for the frequent landslides and low magnitude earthquakes. The life line of Manipur, the national high way NH39, traverses along and in close proximity to this fault in Manipur, and hence the life is paralysed in the area during the monsoonic months. From the GPS campaign mode studies on the western and eastern sides of the CMF, it is observed that there is a change in the crustal velocities from 16 - 22 mm/yr in the east to 33 - 42 mm/yr in the west. Micro-deformations are also observed in the form of displacements respectively with the vertical, N-S and E-W components of–0.111 mm/yr (downward), 0.03 mm/yr (northward) and –0.011 mm/yr (westward). The net displacement is 0.126 mm/yr with an azimuth of N 85° and dipping of 13° towards west. Neotectonic movements along the CMF, as per the GPS measurements, suggest an aseismic nature of the fault with dextral component. Fault plane solutions of the earthquakes show northerly directed principal P-axis indicating the extension (T-axis) along east-west. The resultant creeping of micro-deformation towards the western slopes of the terrain is aligned with the principal T-axis. The creeping triggers the micro seismicity as well as the landslides along the CMF.

Abstract

Since the landslides have started spreading over to the most of the mountain provinces of all over the world, having developed expertise in Landslide vulnerability mapping, Factor of safety, Rock mechanic studies etc. the scientists and the technocrats have started focusing towards developing landslide early warning systems using instruments. As the instrumentation in such vast areas is not feasible satellite based monitoring of landslide movements is fast emerging. In this connection the paper discusses InSAR interferometry based landslide movements carried out in Nainital and Mansadevi areas, Uttrakhand Himalayas, India.

Keywords: SAR interferometry, Monitoring movements, Nainital & Mansadevi Landslides.

INTRODUCTION

Landslides pose greater threats to the population of India also, especially those living in mountainous regions, the top being the Himalayas. Many villages and vital transport routes are endangered by landslides and losses of lives and important infrastructure now become a routine phenomenon. Therefore, studies on surface displacements and landslide movements have become very important. However, due to the large aerial extent of the landslide prone provinces, this task may not be effectively carried out by ground based methods. In the recent years, the availability of interferometric Synthetic Aperture Radar (InSAR) data from a variety of satellite and airborne remote sensing sensors has emerged, as a potential tool that can yield accurate data on surface displacements. Although, monitoring of such low velocity deformations, as we observe in landslides, is only possible if considerably long time series images are available. InSAR derived displacement measurements are not only feasible but also moderate in their costs compared to many ground-based methods. This paper discusses Small Baseline Subset (SBAS) algorithm used to monitor landslide movements.

6.1 Introduction

Farm ponds used in farmers’ fields are generally square shaped or rectangular shaped pyramidal structures. It has a regular side slope, depth, and top and bottom dimensions. It may be excavated/dugout pond or embankment pond. In excavated pond, the pond is constructed below the ground level. Water is collected in the pond by gravity from the adjacent catchment. In embankment type, the pond is partly above the ground and partly below. This type of pond has higher storage capacity than the dugout type pond. This type of pond has a berm and dyke/embankment around the pond. The embankment has some side slope. The pond has bottom dimensions, dimensions at the ground level as well as some dimensions at the top above the embankment. In this chapter, various dimensions of pond like depth, side slope of the pond, as well as the various dimensions at bottom, ground and top level will be discussed.

Identification of enteric bacilli is of prime importance for controlling intestinal infections. This can be achieved by preventing contamination of food and water by a group of bacteria belonging to family – Enterobacteriaceae which are found in the intestinal tract of human beings and lower mammals. The microorganisms of this family are short, gram negative, non spore forming bacilli. Such common enteric bacteria are a) pathogens such as species of Salmonella and Shigella b) occasional pathogens like species of Proteus and Klebsiella and c) normal intestinal flora like species of Escherichia and Enterobactor.

Introduction

An ecosystem is a community of living organisms (plants, animals and microbes) in conjunction with the nonliving components of their environment (things like air, water and mineral soil), interacting as a system. These biotic and abiotic components are linked together through nutrient cycles and energy flows. Ecosystems are defined by the network of interactions amongst organisms and between organisms and their environment. India exhibits a spread of landscape and climate that are mirrored within the evolution of various soils and vegetation. These also exists a significant relationship among the soils, land form climate and vegetation. These additionally exists a big relationship amongst the soils, land type climate and vegetation. Regions are diagrammatic such everyone is as uniform as potential with relevancy physiographic, climate, length of growing amount (LGP) and soils for macro level and land use designing and effective transfer of agro-technology varied Agro environmental condition Zones diagrammatic in line with the design commission which are explained together with the classification by Indian Council of Agricultural Research (ICAR).

State of Jammu and Kashmir is located almost in the middle of three climatic regimes of Asia. The chapter introduces the agro-climatic zones of Jammu and Kashmir based on physiography. Each province of the state of Jammu and Kashmir has been further delineated into micro agro-climatic zones.

Introduction

Rainfed agriculture plays and will continue to play a dominant role in providing food and livestock for an increasing world population. Rainfed agriculture practiced on 80% of the world’ agriculture land area and generates about 70% of the world’s staple food including most of the food in poor communities in developing and least favoured areas. The most recent estimates have put global rainfed croplands at 1.75 billion ha (Bha) at the end of the last millennium, or about 5.5 times the irrigated area in the world. India ranks 1^st amongst the countries that practice rainfed agriculture both in terms of extent 86 (mha) and value production. Agriculture water management deals with the administration of a key input to agricultural production and offers to hope that land and water use will be intensified. Scarcity of water resources and growing of competition for water many sectors reduces its availability for irrigation. Effective management of water for crop production in water scarce area requires efficient approaches for increasing crop productivity and drought tolerance by genetic improvement and physiological regulation may be the means to achieve efficient and effective use of water. A single approaches would not be able to tackle the forthcoming challenge of producing more food and measures with engineering solutions (water saving technologies, irrigation methods, deficit irrigations, proper deficit sequencing, modernization of irrigation system) and agronomic and soil manipulation (seed priming, seedling age manipulation, direct or wet seeded rice. proper crop choice, integrating agriculture and aquaculture, increasing soil fertility and addition of organic matter, tillage and soil mulching). The term enhancing water productivity implies how we can most efficiently improve the outcome or yield of a crop with water currently in use, the answer lies in three main pathways of increasing water productivity with multiple use of water. Transpire most of the supplied water (minimization of unwanted loss), exchanged water for carbon dioxide more effectively inproducing biomass, and convert most of the biomass into grin or other farm of harvestable product. Many technologies to improve water productivity and the management of scarce water resource are available, amongst the most promising and efficient proven technique are limited supplemental application of irrigation for optimize the use of limited water and water harvesting for improved farm income in drier environment.Improving (water productivity, however requires exploiting not only water management but also other input such as improved cultivars, fertility management and cultural practice which influence crop productivity and yield.

“Necessity is the mother of invention”, all of us must have heard this statement at some juncture in our lives. Most of us may even have even gone through the motion of inventing something when needed. However, more and more inventions happening today may not necessarily be necessities. These inventions definitely perform the task of improvingand making convenient our overall living environment. Past few years have seen an increasing awareness and understanding in the field of intellectual property. Among all aspects, one aspect of intellectual property that is gaining increasing attention of intellectual property owners is management of the intellectual property rights.

This brings to our minds one question, how was intellectual property management practised by early mankind? We all do know that early mankind has left no stone unturned to make theabove statement”Necessity is the mother of invention”, a reality. Mankind prospered by leaps and bounds on account of sharing their various discoveries and inventions. Way back then knowledge was meant to be shared, as aptly captured in the Sanskrit Sloka:

5.1 Descriptive Analysis for Marketing Decisions

Measures of Location

In the previous chapters it was discussed how to understand and reach customer. Now lets explore the numerical data through their properties to understand customers and markets. Descriptive statistics is analysis of data that helps describe, summarize data in a meaningful so that the business people get new and deeper insights into the problems and situations. For example a buying pattern for your products might emerge and there could be difference based on gender. This will help the business people to come out various strategies separately for each gender. Data can be easily handled with spreadsheets. One of the very widely used spreadsheets by many business organisations is Microsoft - Excel. MS-Excel is used for various purposes from just maintaining records to finding out relationships between databases. Some organisation use this spreadsheet software for generating memos, track sales trends and other business data. Lets in this chapter explore how excel sheet can be used to perform basic data analysis that can help us to get greater insights.

A metabolic cell contains about 75-95% water by weight. It is important for plants for proper growth and development. Any significant reduction in availability will affects metabolic activity and thus growth parameters which determine yield. The uptake of water by the plant (roots) from the soil is an osmotic phenomenon. The water potential represents the free energy per moles of water. It can be reduced by:

1. Decreasing temperature
2. Adding soluble pressure or
3. Decreasing pressure or
4. Providing additional absorptive surface