eChapters

ABSTRACT

Mushrooms are in use for centuries in traditional system of medicines, and have importance in greater Chinese and western pharmacopeia. Morchella species are well known across the globe as a popular and prized edible fungi and unique culinary saprophytes. They have a long history of usage in the formulation of different traditional medicine for centuries due to their anti- oxidant, anti-inflammatory, anti-cancerous and immuno-stimulatory properties. Inspite of high demand and day-by-day increasing importance, cultivation of M. esculenta Dill.ex Pers and other morels are limited, however, there is a report that some species of Morchella are successfully cultivated in China. Phytochemical studies reveals that polysaccharide groups, phenolic compounds, tocopherols, ascorbic acid and vitamin D are the most active molecules present in morels. In addition to these compounds, morels are also rich in carbohydrates, amino acids, fatty acids, organic acids and several kinds of macro-and micronutrients. Literature revealed that no data on reproductive biology of M. esculenta are available till date. Future investigation is required to study the life cycle and the ecological association of different morels to high altitude regions, and causes of their association with coniferous and broad leaved trees such as Cedrus deodara, Pinus gerardiana, Picea smithiana, Quercus and Castanopsis species. There is an urgent need to explore all traditional knowledge associated with morels, phytochemistrys and associated pharmological studies of major compounds, reproductive cycle and their basic biology for future conservation of this precious mushrooms for man-kind.

5.1 Introduction

Quality is one of the major positioning tools of the commodity for marketability, profitability and for consumer satisfaction. The relative importance of each quality component depends upon the commodity and its intended use and varies among growers, handlers and consumers. To growers a given commodity must have high yield and good appearance and must withstand long distance transportation to market whereas, appearance of quality and longevity is important from the point of view of wholesale and retail marketers. Terms commonly used in measurement of keeping quality of cut flowers are longevity, shelf-life, vase-life, and lasting quality. In addition to these, several criteria have been used for evaluation of post harvest flower quality like:

4.1 Overview of Concept and Science

Preserving flowers and plant parts has been a form of artistic expression that was very popular in Victorian ages. Now, this process is moving from an art to a highly interdisciplinary science and has become a major economic activity on a global scale. Because, dry decorative products have been globally accepted as natural, eco-friendly, long lasting and inexpensive as compare to fresh flowers and plant parts, which are perishable and delicate in nature. These perishables cannot retain their fresh like appearance and beauty for several months and it becomes prodigious job to maintain these qualities. Even with preservatives, the vase life of fresh cut flowers has been prolonged to an extent of 40 per cent only. Hence, for those who want the beauty of nature around them in the form of flowers but on a more permanent basis dried flowers are a solution.

Domain of Dried Flowers

Anything from botanicals such as stems, twigs, branches, bark, leaves/ foliage, flowers, thorns/ spines, fruits, cones, seeds, roots; and minor forest products like lichens, fleshy fungi, mosses, selleginnela ferns etc. in a dried form come under the domain of dry flowers. Until a few years ago dried flowers were popular in the West with very few homes in India opting for them. But, today Indian homes have taken to dried flowers in their many forms and shapes like duck to water. There are different segments which are covered under dried flowers (Table 1).

3.1 Introduction

Flower and plant part based perfumes are receiving special attention at this modern age of civilization. With pre-eminent senses of smell or taste, a large brain affording a superior intellect, would lead to the use of these abilities to improve the environment, the flavour of food and the smell of the surroundings. In fragrance industry, essential oil is a generic term given to all fragrant extracts such as essential oils, absolutes, resinoids, concretes etc. Since antiquity, flowers and plant parts have been used as flavours for food, for religious rites, for beautification of homes and gardens, as incence and insect repellent, in cosmetics and personal adornment and in medicine. Fragrance compositions are used with the purpose to affect customers through their sense of smell and the job of composing fragrances is left upto an expert known as “Perfumer”.

Despite continuing invention of synthetic fragrant extracts, natural essential oils still remain the most important part of fine fragrance. Essential oils are so aromatic and are the focus of the fragrance industry. The content of a pure essential oil product gives it an unmistakable aromatic and healing quality. Nature has always provided us with food, medicine and fibre for clothing that we need to survive. Sometime a walk in the woods, a day spent swimming in Local River or lake or a beautiful sunset can lift a person’s spirit and give them a new outlook. The aroma of a pure essential oil can do the same.

Flavour and fragrance have now become every day necessities and their demand is constantly increasing across the world. Products from different extraction methods are known under different names even though their basic materials are the same. For instance, orange blossom from citrus aurantium on solvent extraction produces “orange blossom absolute” but that of steam distilled produces “Neroli oil”.

2.1 Introduction

Perfumery, the art of making perfumes, began in ancient Egypt but was developed and further refined by the Romans and the Arabs. The history of perfume began in antiquity. The word perfume is used today to describe scented mixtures and is derived from the Latin word, “per fumum”, meaning through smoke. Although perfume and perfumery also existed in East Asia, much of its fragrances are incense based. The world’s first recorded perfume maker Tapputi was mentioned in a Cuneiform tablet from the 2nd millennium BC in Mesopotamia. Perfume and perfumery also existed in India. The earliest distillation of Attar was mentioned in the Hindu Ayurvedic Charaka Samhita. The Bible describes a sacred perfume, consisting of liquid myrrh, fragrant cinnamon and cassia. In Islamic culture, perfume usage has been documented as far back as the 6^th century and its usage is considered a religious duty. Al-Kindi in the 9^th century wrote a book on perfumes entitled ‘Book of the Chemistry of Perfume and Distillations’ that has more than hundred recipes for fragrant oils, salves, aromatic waters and substitutes or imitations of costly drugs.

1.1 Importance

Perfumes, essential oils and aroma are some of the products which indicate religious values, living standards, personality development for personal use and adornment from years back. The Vedic literatures also indicate the presence of perfumes and aromatics and were used for religious purposes as well as medicinal purposes. The word perfume has been used today to describe scented mixtures and is derived from the Latin word, “per fumum”, meaning through smoke. Perfumery has been one of the Indian arts and was a famous centre for perfume and perfume products. The essential oil means a class of volatile odoriferous oils, obtained from raw material of botanical source that impart the plant odour and other characteristic properties derived through distillation (usually with water or steam) or expression and obtained in the form of an oily liquid. The oils extracted through expression are some time called “Expression oils”. The aromatic substances being used from the Vedic period are defined as those plants which possess odoriferous steam volatile constituent’s (essential oil) in them.

Brazil, China, Egypt, India, Indonesia and USA are the major producers of aromatic materials. China is becoming increasingly important as a primary source and a very large quantity of aromatics and flowers as raw material is available. European Union and Switzerland are the main world markets for aromatics and also has established as a largest consumer of essential oils. The world’s largest importer of aromatic materials is the USA followed by Japan. The latter accounts for about 10% of world demand especially for lemon, clove, orange, peppermint and cedar wood oil.

India exports essential oils of lemongrass, mint, sandalwood, palmarosa, cardamom, ginger and eucalyptus in adequate quantity under AGMARK certification. But, for a better export quality there is a need to study the customer requirements, quality assurance and standards to keep pace with International market, Total Quality Management (TQM) through adulteration detection and modern analysis techniques with economic marketing channels.

India possesses a number of resources as plant parts, ample land and varied climatic conditions with low production costs but the essential oil producers need to study the customer needs for a regular supply of best quality products at a competitive rates. Today, second important factor for successful competition is the quality assurance. The consumers, these days, are very much aware about the quality and safety of using perfumes, essential oils and other pharmaceutical products. The third most important point is the packaging which attracts the consumers most of the times. Proper packaging along with an attractive label is always a plus point for the marketing of any product. Hazard Analysis Critical Control Point (HACCP) and Good Manfacturing Practices (GMP’s) are the quality assurance systems which continuously controls and regulate the quality production of commodities, needs strict enforcement. ISO 9000, TQM and ISO 14000 series are the some of quality management organizations, working for the development of quality standards.

Distillation of rose oil and rose water:

For distillation of rose oil and rose water initially the fresh rose flower are hydro distilled. The oil and water are collected together. The oil which floats upon the water is separated by decantation get oil directly, while the water is re-distillated. The oil obtained from re-distillation is called recovered oil or water oil. The direct oil and water oil are then combined to make the commercial rose oil.

The water obtained from the second re-distillation step is the commercial rose water

Curing- Curing is a process in which produce is subjected to undergow through a special treatment to get the quality product.

Structure of turmeric process

Boiling

• Boiling figures in water in copper vessels/galvanized iron/earthen vessels
• If water is acidic then add NaCO₃
• Stopped boiling when froth starts coming out and white fume appears
• Then dried in the sun for 10-15 days till they become hard and brittle

Ingredient of tomato chutney: Tomato 1kg, sugar 500g, salt 25g, onion chopped 100g, ginger chopped 10g, garlic chopped 5g, red chilli powder 10g, cinnamon, cardamom large, aniseed, cumin, black pepper powder 10g each, vinegar 100ml and sodium benzoate 0.50g/kg final product.

Sauce/Ketchup:-Fully ripe red fruits are selected, all green and blemish part are discarded. It is made from strained tomato juice or pulp and spices, salt, sugar and vinegar with or without onion and garlic and contains not less than 12% tomato solid and 25% total solid.

Ingredient of tomato sauce/ketchup: Tomato pulp 1kg, sugar 75g, salt 10g, onion chopped 50g, ginger chopped 10g, garlic chopped 5g, red chilli powder 5g, cinnamon, cardamom large, aniseed, cumin, black pepper powder 10g each, clove headless 5 number, vinegar 25ml or glacial acetic acid 5ml and sodium benzoate 0.25g/kg final product.

Ingredient of 1kg mixed pickles: Cauliflower + diced carrot + turnip slice + vegetable pea each in equal amount of 1kg, salt 100g, ginger chopped 20g, onion chopped 50g, garlic chopped 10g, red chilli powder, black pepper, turmeric, cardamom large, aniseed powder, cumin, fenugreek powder each of 10g, clove headless 5 number and mustard 50g, vinegar 200 ml and mustard oil 450 ml.

Pickles:- Pickles are a product which is prepared by using the common salt or vinegars of fruits and vegetables. It is a good appetizer and adds to the palatability of a meal. It’s also help full to stimulating the flow of gastric juices and thus helps full indigestion. Pickles are mainly preserving by salt, vinegar, oil and it can also be preserved by the mixture of salt, spices, vinegar and oil.

Ingredient of 1kg mango pickles: Mango piece 1kg, salt 150g, fenugreek powder 25g, turmeric powder 15g, nigella seed 15g, red chilli powder 10g, clove headless 8 number, black pepper 15g, cumin 15g, cardamom large 15g, aniseed powder 15g, asafoetida 2g and mustard oil 350ml.

Material balance data

Guava pulp : 5.00 kg

Amount of sugar added : 4.50 kg

Amount of glucose added : 500 gm

Amount of SMP added : 700 gm

Squash: It is a type of fruit beverage containing at list 25% fruit juice or pulp and 40-50% TSS commercially. It’s also containing about 1% citric acid and 350ppm sulphurdioxide or 600ppm sodium benzoate. Generally it is diluted before serving. Mango, orange, pineapple, lemon, lime, guava, litchi etc are commercially used for squash making using KMS as preservative. The coloured fruit like jamun, passion fruit, peach, phalasa, plum, mulberry, strawberry and grapefruits are also used for making squash but due to bleaching effect KMS is not used as preservative. In such types of fruits sodium benzoate used as preservative.

Beverages:-The fruit beverages are easily digestible, highly refreshing, thirst quenching, appetizing, nutritionally for superior than many other synthetic drink. There are two types of fruit beverages i.e. unfermented beverages and fermented beverages. Natural juice, RTS (Ready to Serve), nector, cordial, squash, crush syrup, fruit juice concentrate and fruit juice powder are the main unfermented beverages. The fermented beverages are wine, champaigne, port, sherry, tokay, muscut, neera, cidar, orange wine, berry wine and fenny are the important.

Preserve:- Amature fruits/vegetable or its pieces impregnated with heavy sugar syrup till it become tender and transparent is known as preserve. The fruits like aonla, bael, apple, pear, mango, cherry, karonda, pineapple, papaya are commonly used.

Candied fruit:-A fruits/vegetable impregnated with cane sugar syrup and subsequently drained free of syrup and dried is known as candy. The most suitable fruits are aonla, apple, pear, cherry, karonda, pineapple, papaya are commonly used. In candy the total sugar contains of the impregnated fruits is kept about 75% to prevent fermentation.

Marmalade: Marmalade is a fruit jelly in which peels of the fruits is in suspended forms. This product is generally prepared from citrus fruit like orange and lemon. The citrus marmalade can be classified into jelly marmalade and jam marmalade. 1 kg pectin extract required 750g sugar and 62g shredded peel.

Jelly:-Jelly is a semi solid product prepared by boiling a solution of pectin containing fruit extract free from pulp after the addition of sugar and acid. A perfect jelly should be transparent, well set, should have original flavour of the fruits, attractive colour and it should be free from dullness. Jelly is mainly prepared by guava, sour apple, wood apple, loquat and papaya. Apricot, pineapple, strawberry etc of low pectin containing fruits can also utilize after addition of pectin powder because these fruits have low pectin contain.

Jam:-Jam is a product made by boiling fruit pulp with sufficient sugar to a reasonably thick consistency. Jam is mainly prepared by apple, pear, sapota, apricot, peach, papaya, karonda etc. It can be prepared from one kind of fruits or from two or more kind of fruits. In general jam contain 0.5-0.6% acid and invert sugar should not be more than 40%.

Canning: Cannings the process by which sealing of the food product and sterilizing them by heat for long storage is known as canning.

The term canning was first invented by N. Appert (1804) in France. In honour of the inventor canning is also known as appertization (Appart is known as the father of canning). The main principle of canning is destruction of spoilage organism by means of heat. The procedure of the canning should be as follows.

Preparation of the material: Common minute material for analysis in Waring blender for 1 to 2 minutes. Do not over heat. Pass it through No.60 sieve and put is in airtight container.

Procedure: Take 2 to 3 g sample in duplicate in pre-dried and pre-weighed 7 cm diameter aluminium dishes. Remove the dish cover and put them in vacuum oven and dry for 6 hours at 88°C and 26-22 inch vacuum. During this process, admit to oven a slow current of air (2 bubbles per second) dried by passing H₂SO₄ replace the cover, cool it in desiccators and weigh again.

Procedure: Standardize the pH meter with a buffer solution of pH. Take the sample solution in a 100 ml beaker. Put the electrodes in the solution and read on pH meter. After each observation, wipe the electrodes with a piece of cotton soaked in distilled water and rinse the electrodes with water with the help of a wash bottle and dry with filter paper.

Principle: Addition of calcium chloride results in the precipitation of pectin as calcium pectate from an acid solution. Calcium pectate is washed with water to make free from chloride and is dried and weighed.

Principle: Sample extract in oxalic acid is titrated against standard sodium 2, 6 dichlorophenolindophenol dye to a faint pink colour which persists for 5-10 seconds.

(Indophenols Method)

Fructose, a keto-hexose (called as fruit sugar), is usually accompanied by sucrose in fruits and estimated by the methods of Ashwell (1957).

Materials

Resourcinol reagent: Dissolve 1g resorcinol and 0.25 g thiourea in 10 ml glacial acetic acid. This is stable in the dark.

Dilute HCl: Mix five part of conc. HCl with one part of distilled water.

Standard fructose solution: Dissolve 50mg of fructose in 50 ml water. Dilute 5 ml of this stock soln. to 50 ml for a working standard.

Principle: The copper in the Fehling solution is reduced to red, insoluble cuprous oxide in the presence of invert sugars like glucose and fructose. The quantity of sugars solution liquids for complete neutralization of a known quantity of Fehling mixture is determined by titration using methylene blue as the indicator.

(Lane and Eynon Method)

Purpose: The organic acids present in fruits and vegetables influence the flavour, colour, keeping quality and maturity. The maturity standards are determined by the acid and sugar ratio. The total acidity (citric acid) is determined by titrating the juice against standard alkali solution.

Equipments and chemicals: 10 ml., pipette, 25ml. Burette, small glass funnel, dropper, juice extractor, distilled water, 100ml. volumetric flask, burette stand, beaker, N/10 sodium hydroxide, filter paper, phenolphthalein indicator (one gram of phenolphthalein in 100ml. of 95% ethyl alcohol)

Principle: To determine water in soluble solids, a known quantity of sample is boiled in water and the insoluble material is collected on a weighed filter paper. The insoluble mass is then washed with hot water and dried in oven.

Purpose: The ash content of plants represents the deposition of minerals elements in the plant or in its parts. The value of ash content in the plant tissue indicates the health of the plant. Plant ash is also used both in qualitative and quantitative estimation of mineral elements.

Material and Equipments: Crucible, oven, chemical balance and weight box.

Principle: A weighed sample is dried in an oven at 60-70⁰C up to a period of time when weighing made at 2 hour intervals do not differ by more than 2-3 mg.

Purpose: The estimation of total soluble constituents gives the approximate amount of water soluble substance present in the sample. Among the various soluble substances the amount of sugar is 80-85 percent. The TSS value is roughly considered to be the amount of sugar and soluble minerals present in fruits and vegetables. The total soluble solid content can be determined by hand refrectometer.

Material and equipments: Hand refrectometer, juice, muslin cloth or tissue paper and glass rod.

Standard solution: Standard solution is defined as a solution whose strength is known. e.g. 1 N solution.

Molar solution: Molar solution can be defined as a solution containing the number of moles of a solute (substance) i.e. molecular weight in gram per litre of the solution. e g. Mol. wt. of NaCl 23+35.5 58.5,

So 58.5 g NaCl per 941.5 ml of water= 1 M NaCI solution. Molarity is generally designated by M.

Molal solution: Number of moles of a substance/solute per litre of solvent makes a molal solution. Mobility is generally designated by m.

Description of important medicinal plants

Description of important spices and condiments

Shrubbery-An area of cultivated shrubs in a parkor garden is known asshrubbery or any area in the garden fully solely devoted to the shrub plantation is called shrubbery. These shrubs are maintained in formal way therefore require regular training, pruning and clipping. Maintenance of shrubbery is easy and become less costly if planted properly considering following point (See plate 22).

• Selection of hardy shrubs.
• Shrubs having profuse flowering and beautiful foliage.
• Selection of shrub according to soil.
• Shrub having slow growing habit and required less pruning and management.

Herbaceous border

In this system plant are arranged in irregular group of a kind for harmonious are contrasting colour effect, either all flowering at one time or successfully in such a way that those flowering latter should grow up and screen the all ready flowered. The planting of annuals in the border of a plot is called as herbaceous border. When the border is to be viewed from both side tall plant are planted in center followed by medium and dwarf planting in both side. Herbaceous border may include all the herbaceous plant including herbaceous perennial (Flowering and non flowering) bulbous and annuals (see plate 20 & 21).

Purpose-Planting of foliage and flowering trees, shrubs, climbers, annuals, perennials and lawn in a piece of land by adopting certain principles is termed as garden design. The objective of a garden layout by adopting a design to provide recreation, enjoyment and education to the society. Natural flora, religion, topography of land and climatic had played a major role in the development of garden designs. Basically there are two garden designs. In one the plantation of shrubs, trees, climbers etc. and lawns is done by adopting a geometrical design and maintaining bilateral balance whereas, in the other one the plantation is done by taking in account the topography and terrin of land, containing open lawns and cluster of trees. The former is called formal are artificial garden while the later is called as informal or landscape garden.

Lawn

Lawn is a natural green carpet, and it is important feature of a landscape and a garden without a lawn is not considered complete. Lawn is an area of land closed mowed grasses it is primarily developed for aesthetic and recreational purpose. A lawn is an integral part of a garden and landscape besides aesthetic and recreational purpose and several other purposes. Lawn provides a place for taking rest after tiring of the day, holding parties, social functions, passive and active recreation. Distinguishing characteristic of turf grasses is the ability to with stand close mowing and still providing a functional dense healthy ground cover. Lawn is also called as heart of garden. J.B. Olcoth designed first experiment in lawn grass at Monchester in USA in the 19th century. Festuca and Agrostis species were used to make turf (Lawn) during 1880 in U.K. In the early 19th century lawn become wild spread out side of parks golf course. Now a day in many metro cities of India lawn has become a cultural of the passion of many homes.

Edge plant

Very low growing plants grown only for the purpose of decoration and demarcation and not for screening are known as edging. Live and inert materials used for living of borders flower beds, paths, lawn, shrubbery and herbaceous border are known as edging. Formal edgings are: Bricks, stones, tiles, concrete etc. Informal edging are: Grass verges and crazy paths made up of tiles stones etc.

Description of important annuals

A. Winter season annuals (Seeds are sown in Sept.-Oct. and transplanting in Oct.)

Description of the important flowering shrubs

Description of the important foliage trees

Description of the important flowering trees

Important diseases of vegetable crops

1. Damping off: (Phytophthora parasitica, Pythium sp. Rhizoctomia solani):This is a disease of the seedlings at the nursery stage. Due to the attack of this fungus seedlings rot at the ground level and collaps.

Important insect-pests of vegetable crops

1. Aphids: (Myzus persicae)

The aphids damage the crop by sucking the cell sap from the leaves as stems. The affected leaves in severe cases curl-up and rolled. The plant may be stunted, wither and die. There are three different species of aphids. They are greenish or black in colour.