eChapters

Abstract

Colostrum is the lacteal secretion after the birth of the new-born. It has a very different composition from milk, naturally designed to build immunity, promotes growth, and protects new-born mammals from external factors. It has a higher amount of protein and fat which provides the building blocks for growth. The higher macro and micro nutrients present in it help in various inter and intracellular activity and metabolism. Colostrum is fully loaded with various immune-boosting factors and growth factors, among them immunoglobulin, lactoferrin, lysozyme, insulin-like growth factor, vitamins have the most importance. Colostrum can fight against various diseases, bacteria, viruses, toxins, and can build a healthy immune system and gastric digestion system in the human body. Bovine, non-bovine, and human colostrum have almost all components in common but at different compositions. Non-bovine colostrum is comparatively less explored than bovine colostrum. Deep research and marketing can bring this nature’s gift for the goodness of human beings.

Introduction

The ancient agriculture as an each class of advice has been well connected into several subcategories. As such, the advice under centennial sub-category has been divided to a few references, in adjustment with proper specification not to access only the aggregate of the publication. However, the information on past day agriculture to attending for data has been collected from the adapted references. There are several pictures assuming seeds of cereals and legumes and those of a collection of agricultural tools and implements begin in archaeological excavation and office texts. These are mentioned to advance how accurate to accept in aggregate of every fragment of advice and verify it from added sources more than one. The painstaking and thorough going work have revealed the state of agriculture during the period under study and its gradual development through the ages. The recorded findings are no doubt those have not been comparable with present-day agriculture. The awareness of the people engaged in agriculture regarding the types of food-crops to be grown, the animals to be domesticated and reared for agricultural operations as well as sources of food and nutrition, the design and preparation of tools and implements for agricultural operations and machineries for food processing unfolds gradually with experience gathered in course of time. The agriculture in past period wherein the population was predominantly pastoral and agricultural such great strides were noticeable in the pursuit of agricultural sciences with a sound traditional and scientific practice. Therefore, the recognizable endeavor throughout the period gives sufficient reasons to be proud of cultural continuity towards agricultural heritage.

Cakes are sweet baked products characterized by high level of sugar in the formulation and hence are foods of high calorific value. Among the various ingredient used flour, sugar, shortening and egg are the essential ingredients for cake manufacture. The optional ingredients are baking powder, milk, fruit etc. For cake manufacture the selection of ingredients is of paramount importance.

India’s bakery market at 49.5 billion tonnes makes it the third largest market in Asia Pacific, only after Japan and Australia. 72 The bakery industry in India comprises of organized and unorganized sectors. The organized sector consists of large, medium and small-scale manufacturers who produce packaged biscuits and bread. The unorganized sector consists of small bakery units, cottage and household type manufacturing their goods without much packaging and distributing their goods in the surrounding areas. Bread market is estimated to be growing at around 7% p.a. in volume terms, whereas the biscuit market has witnessed a higher growth at around 8–10%. Within the biscuit category, cream and specialty biscuits are growing at a faster rate of 20% p.a. The per-capita consumption of biscuits in India is around 900 gm as compared to 15–20 kg. for developed countries. The consumption of biscuits is equally divided between the urban and rural population. Demand for biscuits in 2003–2004 is likely to exceed 1.2 million tonnes.

Learning about water chemistry is often neglected by most of the aquarium owners. By understanding the concepts of water chemistry, they can considerably improve success rate in rearing healthy fishes. It is well known that the quality of water has a direct impact on the health of the fish. But many aquarium owners do not understand the basic internal chemistry of the water, nor do they understand how to correct it or safely adjust it. Until the basics of water chemistry is understood and some common water maintenance techniques are learnt, it will be difficult to maintain a healthy and safe environment for the fish in tank. The water quality is by far the single most important factor for the healthy fish, and the more is known, the better management is expected.

Fish depends for their basic necessities on the water in which they live. The most characteristic feature of an aquarium system is, therefore, the quality of the water available in tanks/aquarium. This water must be obtained from some source, pre-treated to make it suitable for the fish, delivered to the fish in sufficient quantities and maintained in good condition. The water supplied to an aquarium is not pure, but it contains dissolved and particulate materials, some are necessary for up keep of the fish and rests are harmful. Contamination may occur not only at source or from the animals, but often takes place within the aquarium from the materials used for its construction. The number of fish that can be maintained within the aquarium is said to be according to the quality and quantity of the water supplied to an aquarium. However, it is rarely the quantity of water per unit which limits the carrying capacity. The capacity is usually set by the requirement of dissolved oxygen and the accumulation of toxic metabolic products in the aquarium.

A kitchen garden/ nutrition garden is a vegetable garden where the vegetable crops are grown in the backyard of a house or any available space in compound or rooftop of the house, to meet the daily requirement of the family. All the members of the family are collectively involved in a kitchen garden.

For a balanced diet, 300 g of vegetables are to be included in our daily food. But on an average, Indians take only 160 g per day. Hence to fill up the gap, vegetable cultivation not only in farmers’ holdings but also in the home gardens is encouraged.

The introduction of high yielding varieties, additional irrigation facilities, a great input flow through fertilizers and pesticides, farm mechanization, credit facilities and other rural infrastructure facilities ushered in the green revolution. The food grains area under irrigation as a percentage to its total sown area has been increased from 20.9 to 51.2%, rice irrigated area from 36.5 to 58.3%, wheat from 43.1 to 93.4%, pulses from 9.4 to 18.6%, oilseeds from 3.7 to 28.6% during the period from 1965-66 to 2013-14 (DES, 2015). Despite the net sown area being stagnant around 140.80 M ha, gross cropped area has been increased significantly from 155.28 M ha in 1965-66 to 195.25 M ha in 2011-12 due to increase in net irrigated area from 26.34 to 65.26 M ha (Fig. 1), gross irrigated area from 30.90 to 91.53 M ha during the period. There has been a sharp decline in average size of operational land holdings. The scope for expansion of the area available for cultivation has become limited. The average size of holdings for all operational classes (small & marginal, medium and large) have declined over the years and for all classes put together it has come down to 1.16 ha in 2010-11 from 2.28 ha in 1970-71. Therefore, it is the urgent need to use the natural resource like water efficiently and in a sustainable manner.

Introduction

Animal husbandry has been an integral component of Indian agriculture since time immemorial. It is still continuing as one of the major avocations in India contributing nearly 4.9% to the national GDP and 28.4% of the agricultural GDP. Livestock population in the country as per Livestock Census 2019 is 535.78 million which is an increase of 4.6% over Livestock Census 2012 (BAHS, 2019; DAHD, 2019). Cattle, buffaloes, sheep and goats are the major livestock in the country. Today, India is the global leader in milk and milk products with a production of 187.7 million tonnes (MT) and the availability of 394 ml milk per capita per day. The per capita availability of milk has increased substantially during last four decades. The anticipated milk demand is expected to be 266.5 MT by 2030 based on per capita consumption of 468 ml/day (Table 1). It has been made possible with the active involvement of farming community and by creating awareness about high yielding breeds of livestock, improved rearing methods and milking, management of pests and diseases and most importantly, the feeding of the animal. The crop residue constitutes a major chunk of fodder to the livestock in many parts of the country. However due to their low nutritive values and poor palatability, it is not helping to realize the full milking potential of animals. A huge opportunity exists in livestock sector as there is a growing demand for animal products particularly milk and meat (NDDB, 2019). In addition, for promoting organic farming particularly the need of farm yard manure has necessitated the farming community to keep livestock as a complementary component of his farming. It provides draught power and organic manure to crop sector and hides, skin, bones, blood and fibers to the industrial sector. Therefore, the importance of livestock goes beyond its food production function, and has become even more significant (Birthal et al., 2002).

Introduction

Agricultural Extension is as ancient as agriculture itself. When it moves in agricultural trends, the importance on extension has also been transformed. Firstly, agricultural extension was the component of the research-extension-farmer approach. In the Training and Visit (T&V) period, communication of innovation was the crucial concept and the role of extension was to successfully disseminate the technological interventions. However, after the green revolution, the gap between resource rich and resource poor farmers widened with information and extension reaching only a few of them. With the conceptualization of new models, like Agricultural Knowledge and Information Systems (AKIS), the focus of extension has changed to formation of groups and collective farming. In time, the private sector has also entered into the agricultural arena, introducing the concept of pluralism in extension. Emphasis on mass media has also increased. More recently, Agricultural Innovation Systems (AIS) is introduced within the innovation systems framework. It focuses on the actors, their interactions, the institutions, and the policy environment to support or hinder it. Communication for innovation is the key AIS concept tried to identify the actors in systems, their core activities and bring them into an innovation platform for effective service and successful innovations (Saravanan, 2017).

Introduction

India is considered as one of the emerging superpowers of the world. This potential is attributed to several indicators, the primary one being its demographic trends and a rapidly expanding economy. In 2015, India became the world’s fastest growing economy with a 7.5% estimated GDP rate. But in the year 2020, the pandemic lockdown situation created adverse impact on the global economy. At this juncture, there is an urgent need to focus on native and indigenous resource mapping and judicious utilization of it to be a self-reliant. The COVID-19 pandemic has necessitated a new set of reforms to strengthen the economy. The first mention of this came in the form of the ‘Atmanirbhar Bharat Abhiyan’ or ‘Self-Reliant India Mission’ by the Government of India during the announcement of the coronavirus pandemic related economic package on 12^th May 2020. Almost 70% of India’s population depends directly and indirectly on agriculture for their survival. This means the country cannot have a development model that ignores agriculture.

It’s time to take a look at India’s agriculture economy. Over the last 10 years, (2008-19) India has been a net exporter of many farm produce. In fact, in 2018, the government has come up with a new agricultural export policy aimed at doubling farm income by 2022. However, in 2019-20, agri-exports were just $36 billion and the agri-trade surplus was $11.2 billion. The net agri-trade surplus has been falling over a period of time, making it difficult to achieve doubling of farmers’ income and doubling of agriculture exports by 2022as well.

India is not yet self-reliant in various essential agriculture commodities and depends heavily on imports. India imports around 15 million tonnes of edible oil every year — more than 9 million tonnes of palm oil and about 2.5 million tonnes each of soybean oil and sunflower oil. It buys palm oil from Indonesia and Malaysia, and soy and sunflower oil from Argentina, Brazil, Ukraine and Russia. There is a need to create self-reliance in theses commodities enhancing productivity of Indian farms to create competitive advantage for domestic producers. India can step up cultivation of sunflower, groundnuts, mustard and oil palms. Presently, India has about two million hectares of land that is suitable for oil palm cultivation.

The Jamun (Syzygium cuminii Skeels) is a nutritious fruit with a variety of uses; virtually every part of the tree has been utilized by both urban and rural dwellers. The fruit is good source of iron, sugars, minerals, protein and carbohydrate etc (Table 1). Fully ripe fruits are eaten fresh and can be processed into beverages like jelly, jam, squash, wine, vinegar and pickles. The Jamun fruit has sub-acid spicy flavour and squash is very refreshing drink for quenching the thrust in the summer season. A little quantity of fruit syrup is much useful for curing the diarrhoea. The vinegar prepared from juice extracted from slightly unripe fruit is stomachic, carminative and diuretic, apart from having cooling and digestive properties (Thaper, 1958). However, small jamun fruits not suitable for table use but suitable for use in the beverage industry as they contained a high amount of acidity, tannins and anthocyanins (Anon., 1986). The volatile oil from the jamun fruits can also be extracted (Vijayanandet al., 2001). Fruits are used as an effective medicine against diabetes, heart and liver trouble (Singh, 2001). The Powdered seeds have also reputation of being useful in the treatment of diabetes. Oral administration of an aqueous jamun seed extract for 6 weeks caused a significant decrease in lipids, thiobarbituric acid reactive substances and an increase in catalase and superoxide dismutase in the brain of diabetic rats (Prince et al., 2003). Leaf extract of jamun also reduces the radiation induced DNA damage in the cultured human peripheral blood lymphocytes. Jamun seed can be used as concentrate for animals, as it is rich in protein, carbohydrates and calcium. Its timber wood is used for railway sleepers, construction of buildings, agricultural implements and for well work, as it resists the action of water (Chundawat, 1990).

2.1. Soil structure

Important physical properties of soils

Soil texture

Soil structure

Surface area

Soil density

1.1. Livestock breeds

Denotes and established group of animals / birds having the similar general body shape, colour, structure and characters which produced offspring with same characters.

1.1. Cattle

1. Indigenous breeds

Milch: Sindhi, Sahiwal, Gir and Deoni

Dual: Hariana, Ongole, Tharparkar, Kankrej

Draught: Kangayam, Umblachery, Amritmahal, Hallikar

Garden lover has to invent their own styles of gardening commensurate with their climate of site, budget and taste. Gardens fall under three categories when it comes to style - formal, informal and wild.

1. Formal style gardens

Formal style gardens are beautiful in the view and have been popular for thousands of years. Granted, it is not to everyone’s taste but it creates a certain magnificence and persistence that will probably have meaning and importance in garden design for many more years in the future. A formal garden is laid out in a symmetrical or a geometrical pattern. Symmetry is the main characteristic of this style of gardening. Geometrically designed landscapes with trimmed hedges, paired flower beds, straight line planting and equal length of the sides of the area are the main features of formal or symmetrical gardening. The formal design is stiff as all garden features in a straight and narrow way. In the formal design, the land is forced to fit in the plan. In this type, an axis is drawn in the centre of the garden which divide whole of the garden in two equal halves, one half being the exact replica of the other, for every feature, element or adornment. The outline of the whole garden as well as the outline of different parts like flower beds, paths, hedges and lawns are of geometrical shape. These shapes are normally square, rectangular,oval or circular.

The Persian gardens, Mughal gardens and Italian gardens were formal in design. Geometrical formalism also influenced the French and British gardens of the pre- Industrial Revolution.

Shrubs are defined as woody, semi woody or herbaceous perennial plants, branches arises from the base of the plants and grow up to height of about 0.5 to 4.0 meters. These plants are commonly erect and bushy. Most of the shrubs are very hardy, require little attention and grow in all types of soils. Although some plants flower almost throughout the year, in most cases it is seasonal and selection can be made in such a way that some plants in the shrubbery will be in bloom in different seasion of the year. Shrub flowers regularly every year and produce flowers of almost all the important colors white, light yellow, golden pink, scarlet, crimson, violet, blue, and some are sweet scented.

In gardens, shrubs are usually planted in three ways:

(1) In the form of shrubbery, on the long strip of land where taller shrubs are grown at the back with medium height in middle and dwarf once at the fronts. Colors of flowers and time of flowering are also considered so that shrubbery remains colorful throughout year with bloom and foliage.

(2) In small garden or to break monotony of open space shrubs are often grown in groups and in this case few plants of the same variety or of different species are selected.

(3) Shrubs are also grown as a specimen plant or in only one row along the border of the garden or a wall.

Shrubs are used in gardens for decorative purposes as these shrubs are found more in ornamental and provide a variety of interests. They are evergreen and best against noise and dust. Any perennial woody, perpetual and thick plant of relatively low height that branches into a few stems or trunks arising from the ground base is known as shrub. They are littler than a tree but taller than herbaceous plants. They are also called as bushes when they are much-branched and dense. They grow upwards up to 0.5-4.0meter and may be flowering and ornamental. Shrubs play important role in permanent landscaping i.e. formal decoration which contributes pattern, colour, fragrance and utility. They may be either evergreen or deciduous in nature. Some shrubs have attractive foliage, flowers and attractive berries. Shrubs are planted as borders on the sides of paths and at the corners of lawn in a curving line. Shrubs are used for back ground, boundary wall, screen, shade, wind breaks and foundation planting. Hence, knowledge on the form, growth habit and habitat is essential to select the shrubs for planting. Shrubs are important part of landscaping or landscape designing is an art of modifying the overall appearance of a given piece of land using different ornamental plants. It is an artificial process. A garden or national and international playgrounds are the example of artificially landscaped area. Ornamental plants are a group of different flowering, foliage and stylish plants. These plants are used for the beautification of selected part of a site or other places.

Climbers are the group of ornamental plants which possess weak stem and climb up the support with the help of certain modified organs to reach the top and receive sunlight and air. Climbers enhance the beauty of any garden provided they are selected carefully depending upon the availability of space and the orientation of the building. The growth habit, mass effect of foliage and diverse flower colour give charming appearance to the climbers for their characteristics.

Ornamental climbers are commonly used to train on suitable supports such as arches, pergola, trellis, along the walls and trees. These are most suited in congested regions prone to scarcity of space especially in urban environment.

Chrysanthemum takes its name derived from the Greek word chryos meaning gold and anthos meaning a flower, as many species have yellow flower heads. The genus Chrysanthemum belongs to family Asteraceae. It is herbaceous perennial plant. The genus comprises some 200 species of annuals, perennials and shrubs from northern temperate zone (chiefly Europe and Asia), whereas some researchers claim it was originated only from China. Though botanists have retained only the annual species under the genus Chrysanthemum (Beckett, 1983; Dole and Wilkins, 1999).

Annual chrysanthemums which are propagated through seeds. Annual chrysanthemum comprise ofthree species viz, Chrysanthemum segtum (corn marigold), Chrysanthemum carinatum (tricoloured chrysanthemum) and Chrysanthemum coronarium (crown daisy or garland chrysanthemum). The crown daisy or garland chrysanthemum (C. coronarium) is a native from Southern Europe, branching annual with finely cut foliage reaching a height up to a metre, size of flowers varies from 2.5 to 4 cm and colour is usually in shades of yellow and white with cream zone at the center (Vishnu Swarup, 1967).

Importance and Uses

Chrysanthemum is the number one dollar earning flower in the United States and cultivars suitable for growing throughout the year have been evolved there. The members of National Chrysanthemum Society run into thousands in several countries. It ranks second (next to rose) in the international cut flower trade. In India, it occupies a place of pride both as a commercial flower, garden plant, pot plant and as a popular exhibition flower.

Large number of chrysanthemum cultivars which exhibit wide variation for characters like growth habit, size, colour and shape of blooms makes chrysanthemum suitable for varied purpose. Its erect and tall growing cultivars are suitable for background planting in borders and as cut- flowers. The dwarf and compact growing ones are suitable for front row planting or pot culture. The decorative and fluffy bloomed small flowered cultivars are ideal for preparation of garland and hair decoration. The extra large- bloomed cultivars are prized for their exhibition value. Certain species like Chrysanthemum cinerariifolium and Chrysanthemum coccineum are cultivated as sources of pyrethrum, a natural insecticide.

Atmosphere can be defined as the gaseous envelope surrounding the earth. It is retained by earth’s gravity. The atmosphere has a mass of about 5.15 × 10¹⁸ kg, three quarters of which is within about 11 km of the surface. The imaginary ‘Karman line’ lies at an altitude of 100 km above the earth’s sea level, and commonly represents the boundary between the earth’s atmosphere and outer space. The study of earth’s atmosphere and its processes is called atmospheric science or ‘aerology’.

Air in motion is called wind. Winds move moisture and heat around the world and also produce much of our weather. Winds are part of a global air circulation system that acts to balance temperature and pressure around the world. Any difference in temperature will always cause a difference in air pressure, and therefore, winds will blow. There are two types of movement in the atmosphere, horizontal movement and vertical movement. The term wind generally refers to the horizontal movement of air relative to the earth’s surface. Vertically moving air columns are called as currents. Upward and downward air currents are referred to as updrafts and downdrafts, respectively. Vertical motion in the atmosphere is of significance for the formation of clouds, precipitation and various types of storms. The horizontal differences in air pressure are far more variable than vertical changes and give rise to a wide range of air motions. Uneven distribution of pressure over the globe is balanced through the movement of winds. Winds also act as a means of transporting heat, moisture and other properties from one part of the earth to another.

In the Indian sub-continent, monsoon is one of the oldest weather observations, an economically important weather pattern over June through September every year. Due to its effects on agriculture, flora and fauna, and other economic, social, and environmental effects, a monsoon is one of the most anticipated, followed and studied weather phenomena of the Indian subcontinent. The word 'monsoon' is derived from the Arabic word mawsim meaning season.

The term 'monsoon' is traditionally defined as a seasonal reversing wind accompanied by corresponding changes in precipitation, but is now used to describe seasonal changes in atmospheric circulation and precipitation associated with the asymmetric heating of land and sea. India Meteorological Department defines it as the seasonal reversals of the wind direction along the shores of the Indian Ocean, especially in the Arabian Sea, that blow from the south-west during one half of the year and from the north-east during the other half. The definitions include major wind systems that change direction seasonally. The cyclic change of wind and rain can be separated into the summer monsoon period characterised by warm and humid south-west winds, and the winter monsoon period characterised by dry and cool north-east winds. In fact, monsoon systems are a major feature of the general circulation of the atmosphere in subtropical latitudes of most regions of the world.

Avocado fruit has become one of the most sought after food sources worldwide. It is a nutritious source of food and is part of the staple diet of many people in third world countries where it is cultivated and where it is native. Production costs are very high owing to the cultural requirements of the avocado tree and the presence of diseases, which can be major limiting factors to production. Phytophthora root rot, caused by Phytophthora cinnamomi, is such a disease. During the developmental stages of hefruit in the orchard and at harvesting, the fruit is also exposed to diseases such as scab (Sphacelomapersea), anthracnose (Colletotrichum gloeosporioides) and Cercospora spot (Pseudocercospora purpurea) Marias (2006).

Major Fungal Diseases of Avocado

Phytophthora root rot

Economic Importance

The causal fungus Phytophthora cinnamomi Rands was first isolated from cinnamon trees in Sumatra in 1922 and has since been reported from over 70 countries. It has an extremely wide host range including 1000 varieties and species of plants. In California alone it has been estimated to affect between 60-75% of the orchards and causes a loss in excess of $40 million annually (Coffey 1992).

Family No. 1

Name and address:

Smt. Jamuna Khajuriputia

Age - 45 years, Caste - ST

Village – Rajbadei

Block – Similiguda, Koraput

Family size: A total of five members, husband Gopinath (50 years), the son Ramesh and Podu, daughter-in-law Dana and herself. Male : Female ratio is 3:2

Educational status: All members have education except daughter-in-law, Dana. The status score is 4.16 in 10 point scale.

Soyabean (Glycine max L. Merril) belongs to the legume family Fabaceae is one of the world’s most important legume crop and is the second most important cash crop in in India.

Economic Importance

Soyabean contributes to 25% of the global edible oil and about two-thirds of the world’s protein concentrate for livestock feeding (Agarwal, et al., 2013). In many countries such as China, Japan, Korea, Manchuria, Philippines, and Indonesia soyabean is considered to be a source of meat, milk, cheese, bread, and oil and therefore it is called “Cow of the field” or “Gold from soil” (Edwards et al., 2019). Soyabean is a chief source of protein and oil as it contains about 40% protein and 20% oil. Many processed products are made from soyabean such as soy milk, soy flour, soy protein, tofu etc. Due to its amino acids composition, soyabean protein is called a complete protein and is consumed at homes for food purposes. The protein fiber that remains after the oil has been extracted is a good source of animal feed for poultry, pork, cattle, other farm animals and pets. Soyabean is an important foreign exchange earner due to export of soybean defatted oil cake (Agarwal, et al., 2013). Bio diesel is produced from soyabean which is non-toxic, renewable and environmentally friendly and reduces particulate emissions.

Bottom or demersal trawling continues to be one of the most important fishing methods of the world. In India more than 35,230 trawlers of various sizes ranging from 9 to 30 m L_OA with engine power ranging from 45 to 495 hp @ 2000 rpm are in operation. Trawl is a bag net towed through water to filter out fishes, the mouth of which is kept open horizontally by means of a beam or otter boards and vertically by means of floats and sinkers. Horizontal mouth opening is also effected by dragging the net from two boats known as bull trawling or pair trawling. The principle of trawling is the movement of the net under water filtering the water through the mesh in the netting, without either permitting the fish to escape or gilling them (Fig. 1). Trawl net is fabricated using polyethylene netting after cutting and shaping the panels as per the design

Maintaining the quality of fish begins with harvest and carries through the harvest-to- consumption chain. Careful handling of fish and shellfish while harvesting and during transport to the processing plant is critical if the high quality of the product is to be maintained. There are, however, several constraints on handling the fish; the important among them are the bacteriological, chemical and physical processes that cause degradation of fish. The surface of dead fish is an ideal growth habitat for bacteria and the end result of such activity is spoiled fish. Reduction of temperature can prevent the growth of many bacteria that cause the spoilage. Chemical breakdown due to oxidative and enzymatic reactions can lead to off odours and flavours and rancidity. Digestive enzymes can initiate decomposition in the dead fish. Physical factors can enhance the bacteriological or chemical processes: bruising, tearing, cutting etc. can expose fish muscle to more rapid bacteriological growth, cause internal bleeding which darkens the fillets and expose greater surface area for chemical oxidation.

Since fish is a highly perishable item of food, it has to be immediately processed to various products to preserve the quality and to increase the shelf life. Fish requires proper handling and preservation to increase its shelf life and retain its quality and nutritional attributes. The objective of handling, processing and preservation is to control or reduce the spoilage process so that the final product is wholesome and safe for the consumer. Fish and fishery products brought to market in a well-preserved condition will generally command higher prices, both at wholesale and retail levels, and thus give better returns to the fishing operation.

Low temperature preservation by chilling and freezing methods are widely practiced to maintain the quality and freshness of fish and fish products. Chilled storage method, i.e., keeping the fish in the unfrozen condition has only limited shelf life and it will vary between 4 and 20 days depending on the condition and species of fish. In frozen storage also the shelf life is restricted but it varies from few weeks to years. The various factors that affect the frozen storage shelf lives are condition of fish at the time of catch, handling, processing and product development, packaging and glazing of the product, freezing method adopted, frozen storage temperature, stacking methods and transportation techniques. These factors can be put together and can be termed as ‘Product, Processing and Packaging’ (PPP) and ‘Time Temperature Tolerance’ factors (TTT).

Trends in aquaculture and fisheries

Global fisheries have made rapid strides in recent years by establishing its strong hold over increasing food supply, generating job opportunities, raising nutritional level and earning foreign exchanges. These benefits become more important when placed in the context of current challenges in food production, nutritional security, social transitions and growing climate uncertainties. Fish and fishery products are the most traded food commodities in the world accounting for 1% of world merchandise trade in value terms representing more than 9% of total agricultural exports all over world (FAO, 2014). About 38% of the global fish production enters international trade in various forms and shapes, generating an export earning of nearly US$148.1billion with a record import at US$140.6 billion during 2014. Mostly the developing countries that account for over 60% of global fish catch, which has continued to expand at an average annual rate of 8.8% (FAO, 2009 & 2012) and play a major role in the global trade of fish and fish products contributing around 50% of fishery exports in value terms and more than 60% in quantity terms supplied by them (World Bank, 2011). At the same time, demand for fish products are likely to rise as a result of rising populations that are expected to reach 9.3 billion by 2050. Developing countries have a positive trade balance due to their increasing involvement in global fisheries trade. Developing country like India may have higher proportion of population growth but its impressive economic growth over the past two decades has resulted in steady increase in per capita income in real terms that in turn increases the purchasing power of people resulting in increasing demand for food to feed & ensure nutritional security of the population. As a result of which it brought inconsistency in fish consumption pattern across the coastal, marine and hill region.

India has made considerable progress in improving its food security. The agricultural development strategy pursued in the country, particularly since the mid-sixties, is recognized and appreciated world over. The integration of agricultural research with quality education and a properly planned extension education system has been one of the fundamental foundations of this developmental strategy, which also led to revolutions in many other sectors of agriculture and allied enterprises. As a part of this strategy, several programmes of transfer of technology from research stations to farmers’ fields were launched in the country. These included National Demonstration Project, Lab to Land Programme, Operational Research Project and Krishi Vigyan Kendras (Farm Science Centers). The programmes were continuously reviewed from time to time and reformulated for their effectiveness. Presently the Krishi Vigyan Kendras (KVKs) have been recognized as an effective link between agricultural research and extension system in the country (Venkatasubramanian et. al., 2009).

Krishi Vigyan Kendras (Farm Science Centers), an innovative science-based institution, were established mainly to impart vocational skill training to the farmers and field-level extension workers. The concept of vocational training in agriculture through KVK grew substantially due to greater demand for improved/agricultural technology by the farmers. The farmers require not only knowledge and understanding of the intricacy of technologies, but also progressively more and more skills in various complex agricultural operations for adoption on their farms. The effectiveness of the KVK was further enhanced by adding the activities related to on-farm testing and front-line demonstrations on major agricultural technologies.

Introduction

Oxygen uptake in fishes is affected not only by the abiotic factors of the environment but is also affected due to various biotic factors. Works on fish aggregation reveal that oxygen uptake of a fish is changed by the number of fishes mutually participating in respiration which has been demonstrated by various workers. The variation in oxygen uptake when fishes of either similar or different genera or species are kept in an association is known as the group effect. The variation in oxygen uptake due to the group effect is an established fact.

The investigation and approaches of Allee (1931); Schtefanesku (1958); Malyukina et al, (1962); Grigor’eva (1966); Umezawa and Watannbe (1979), Wares II and Igram (1979), Umezawa et al, (1981) Imabayshi and Takahashi (1987), etc. are worth mentioning and regarded as milestones in this field. Allee (1931), Shlaifer (1938); Geyer and Mann (1939), Job (1955); Delco (1963); Uematsu (1971); Parker (1973), Itazawa et al, (1978); Smatresk and Herreid (1980); Kanda and Itazawa (1981); Singh and Munshi (1985) and Jha (1995) have observed that grouping lowers down the oxygen uptake of fishes but the reverse relationship was also reported by Bowen (1932); Schuett (1934), Brett and Sutherland (1965), Umezawa and Kanikawa (1980), Ghosh et al, (1994), Krause and Ruxton (2002), Pandit and Ghosh (2007), Ward and Webster (2016). In due course, different aspects of grouping have been studied by various workers and many terms are proposed accordingly to explain the phenomenon.

5.1. Groundnut

5.1.1. Aphids - Aphis craccivora (Aphididae: Hemiptera)

7.1. Rice

7.1.1. Blast

Magnaporthe oryzae (formerly Magnaporthe grisea) anamorph: (Pyricularia oryzae)

8.1. Redgram

8.1.1. Wilt: Fusarium udum

1. Symptoms

10.1. Sugarcane

10.1.1. Yellow leaf disease

1. Vector: Melanaphis sacchari , Rhopalosiphum maidis

2. Symptoms

3.1. Cereals and millets

3.1.1. Rice

1. Major weeds

Grasses

Organic Fertilizers and Manures

Farmers have been using organic waste as fertilizers for a very long time. As previously mentioned, the application of O.M. to a soil can have number of beneficial effects on soil structure, C.E.C. and microbial activity. However, organic manures mainly originate from the waste products of animal and plant production and although rich in carbon compounds, they are usually relatively poor in available plant nutrients.

The nutrient content of organic manures varies widely depending on their source and moisture content. Farm yard manure (F.Y.M.) is one of the most common organic fertilizers used. Others are concentrated animal manures, and crop residues such as straw.

Diagrams and graphs are the effective and attractive ways of presenting data. Widely used diagrams for data presentation are pi chart and bar diagrams. Bar diagrams are also of various types; (i) Simple bar diagram (ii) Component or sub-divided bar diagram (iii) Multiple bar diagram (iv) Percentage bar diagram. The widely used graphical presentation are histograms, frequency polygon and frequency curve.

There are numerous libraries to create charts and graphs in R programming language.

Pie-chart- A pie-chart is a representation of values of variable as sectors of a circle with different colours/shadings. The colours/shadings used for different sectors are indexed at the side of the graph. pie() function is used to create pie chrt in R.

Let us create an exel file names as ‘exp_sports’ which contains the expenditure made (in Rs.) under various sports in a sports club. The name of the sports are cricket, hockey, tennis and football. The names of sports are placed under the column head ‘sports’. The corresponding expenditure (in Rs.) are 7200, 3600, 1800, 1800 and they are placed under the column head ‘expenditure’.

The basic syntax for creating a pie-chart using the R is.

Is it possible to feed a world population projected to reach 8.5 billion by 2030, 9.7 billion by 2050 and exceed 11 billion in 2100? India expected to surpass China as the most populous country in the world within seven years (UN report July 2015). Besides that there is an immense decline in yield and quality over the past three decades may be at the point of diminishing returns (Bouis 1993; Cassman et al. 1995; Flinn and De Datta 1984). Furthermore, the soil is partially under tremendous pressure to sustain yield and production. The excessive and exhaustive agriculture practices have not only declined the soil quality but it’s also reported for different human and animal health issues. Thus, keeping pace with population growth and health safety appropriate soil management practices must be addressed. Now burgeoning population load, declining yield, soil health diminution, and effect on human and animal health arises the opportunity for sustainable soil management to cater the problem at the right time. Figure 1 clearly indicates the tremendous load on soil and subsequent results. Burgeoning increase in population and a load of food production intensification, sustainable soil management will become increasingly important in future. Soil being the powerhouse of the mineral nutrients also retains most living organisms within it. The appropriate soil management practices ensure the critical level of mineral elements which finally come into the human body.

Liebig (1840) on the basis of soil and plant analysis deduced the phosphorus requirement of plants. J.B. Lawes conducted series of field experiments to improve the fertilizer value of common sources of phosphorus such as bone meal, apatite, rock phosphate. Lawes (1843) produced super phosphate by treating apatite mineral containing phosphorus with sulphuric acid. He also stated that the phosphorus present in bones of higher animals can be made available by treating with sulphuric acid.

Phosphorus is the second most deficient nutrient in the world. Annual application of phosphorus fertilizers to crops is 36 million tons of which

1.32 m tones are consumed in India. Most of the arable soils in tropical and subtropical regions are deficient in phoshphorus, but the response of crops to phosphorus is uncertain. Phosphorus concentration in plants ranges from 0.1 to 0.4 per cent.

Soil Organic Matter

Soil organic matter plays an important role in the maintenance and improvement of soil properties. It is a dynamic material and is one of the major sources of nutrient elements for plants. Soil organic matter is derived to a large extent from residues and remains of the plants together with the small quantities of animal remains excreta, and microbial tissues. Soil organic matter is composed of three major components i.e. plant residues, animal remains and dead remains of microorganisms. Soil organic matter comprises residues of plants and animals and these compounds occur in soil in close combination with inorganic substances. Animals and plant residues are made up of complex carbohydrates, simple sugars, starch, cellulose, hemicellulose, pectins, gums, mucilage, proteins fats, oils, waxes, resins, alcohols, aldehydes, ketones, organic acids, lignin, phenols, tannins, hydrocarbons, alkaloids, pigments, etc.

The organic matter subjected to microbial decay in the soil comes from several sources like plant remains, forest litter, incorporation of plant tissues, animal tissues, and excretory products. The chemistry of organic matter is very complex, and investigations of the transformations and the responsible organisms have therefore been extremely interesting. The organic constituents of the plants are commonly divided into six categories.

Fruit jelly is an important part of diet of all human being. It is easily digestible, highly refreshing, appetizing and nutritionally far superior to many foods. Today, a wide variety of fruit jellies are consumed in the home, at work place and sport stadium. There has been considerable increase in the consumption of fruit and vegetable jellies in the world during last few years. Jelly is a semi-solid product prepared by boiling a clear strained fruit extract free from pulp after the addition of required amount of sugar, citric acid and pectin. It should contain minimum 65 percent of total soluble solids and minimum 45 percent of fruit portion (Dhawan, 1998). Guava is rich source of pectin and acid content and have thick flesh is preferred for jelly making. For getting good quality jelly, mix under-ripe fruits give better pectin content and ripe fruits provide the flavor. Winter season fruits yield better quality jelly (Singh and Dhawan, 1983). It is a clear or translucent fruit spread made from sweetened fruit (or vegetable) juice and set using naturally occurring pectin. Additional pectin may be added where the original fruit does not supply enough. Jelly can be made from sweet, savory or hot ingredients. It is made by a process similar to that used for making jam, with the additional step of filtering out the fruit pulp after the initial heating.

Jellies are the products used as bread spreads all over the world. These are made from fruits rich in pectin. Guava, because of its rich pectin content, is processed into jelly. Processing of guava into jelly is practiced by processors all over the world. Colouring of jams and jellies has been an age old practices colorants. Great attention is being paid now days to the usage of natural colours in view of the hazards that the synthetic colours pose to human health. Incorporation of carrot resulted in colour improvement over control. Jelly containing carrot as a colouring source was found slightly better than other vegetables. Jelly is a semi-solid product prepared by boiling a clear strained fruit extract free from pulp after the addition of required amount of sugar, citric acid and pectin. It should contain minimum 65% of total soluble solids and minimum 45% of fruit portion (Dhawan, 1998).

Introduction

Commonly available food materials especially dairy products, cereals and fruits are perishable and require processing for long term storage. The methods of food storage has been known from the pre historic times and was mostly based on processing the food into a more stable form with a longer shelf life. Such processes increases the time range of food availability and in many cases improves the taste thereby, cumulatively improving the food value. One of documented method of food preservation is by fermentation and is age old. Other commonly used methods include drying, refrigeration, salting and fermentation (Luck 1985, Paulus, 1985, Christensen et al., 2003, Martindale and Schiebel, 2017).

Flavour and appeal of food has been considered as one of the important factors contributing to the demand of the food. Originally the flavours were largely plant derived, current industrial practices largely utilise synthesis by chemical reactions and subsequent extraction to achieve a uniform quality (Weckerle et al., 2006, Davidovich-Rikanati et al., 2008, Sethupathy et al., 2018). These chemicals referred to as “flavourings” are defined as compounds that enhance the taste, appeal and palatability of food. They are naturally derived or artificially synthesised compounds. Considering that many artificially synthesised chemical flavours might affect the health adversely. Industrial food research has now shifted their focus on flavourings that are naturally available (Cohen et al., 2018). Such naturally occurring flavourings are referred to as bio-flavours (de Billerbeck 2015). The ease of producing bio active compounds from microbial culture extracts has played significant role in industrial food biotechnology (Verachtert et al., 2005).

Introduction

Wine is a very unique fermented beverage. It was an essential part of various religious and cultural ceremonies in ancient civilizations; and continues to be considered as a ‘drink for elite’. The reason is that wine was considered as ‘Gift of God and ‘God’s nectar’ in religious text books, and medicinal value of the beverage is well supported by modern science. Wine is a beverage well tagged with its geographical origin. This concept originally comes from French concept of terroir; which explains that a varietal wine from a defined region possess distinctive qualities. Wine makers of the past enjoyed this definition of quality for better marketing opportunities. Today, globalization and advancement in wine science created empowered consumers who could clearly discriminate quality of wines. In addition to a product with high sensory qualities, consumers expect a healthful beverage produced in an environmentally sustainable manner. Enology research projects focus on such aspects; and this chapter is a glance on enology advancements and proven health benefits of wine, such as cardiovascular health gut health, dental health etc.

P680: Reaction center chlorophyll in Photosystem II (PSII) which absorbs maximum light of 680 nm in its neutral state.

P700: Reaction center chlorophyll in Photosystem I (PSI) which absorbs maximum light of 700 nm in its neutral state.

P870: Form of bacteriochlorophyll in reaction center of pigment system in photosynthetic purple bacteria that absorbs light maximally at 870 nm in its neutral state.

Paclobutrazol: It is a chemical compound which inhibits Gibberellin biosynthesis. It is also a growth retardant commercially used in overcoming alternate bearing of mango.

Palindrome: Inverted repeats of DNA such that the sequence is the same when read forward or backward; e.g., CAGTTGAC, or in the English language, “Madam, I’m Adam.”

Palisade Parenchyma : Palisade parenchyma cells are seen beneath the upper epidermis. It consists of vertically elongated cylindrical cells in one or more layers. These cells are compactly arranged without intercellular spaces. Palisade parenchyma cells contain more chloroplasts than the spongy parenchyma cells. The function of palisade parenchyma is photosynthesis.

Pantothenic acid (Vitamin B₅): An important constituent of coenzyme A which is involved in transacylation reactions.

Varietal release and notification comes under the purview of the Seeds Act which is intended to provide for regulating the quality of certain notified seeds for sale and for marketing and for the matters connected therewith. Released and notified varieties are offered for seed certification by the seed certification agencies which ensure that the varieties under certification meet certain prescribed field and seed standards failing which they stand to be rejected during the process of seed certification. This ensures seed quality and its availability to the farmers.

Purpose of Release

The purpose of Release of cultivars is to introduce the newly evolved varieties to the public and the farmers in particular for general cultivation in the region for which the variety is released and notified ensuring availability of seed of varieties according to their suitability and adaptation and avoiding mismatch. In other words, release of a cultivar is in the nature of a recommendation to the farmers for its adoption. Therefore, notification of a variety is linked to the release of a variety, though the release process itself does not have statutory cover.

Melon or muskmelon (Cucumis melo L., 2n = 2x = 24, family Cucurbitaceae, mostly andromonoecious, cross-pollinated as well as self-pollinated) has latest global production close to 30 million tons where top ten producing countries are China (16.0 million tons), Turkey (1.8 million tons), Iran (1.6 million tons), Egypt (1.1 million tons), India (1.0 million tons), Kazakhstan (0.9 million tons), USA (0.8 million tons), Spain (0.7 million tons), Italy (0.6 million tons), Guatemala (0.6 million tons). India produced 1.2 million tons melons from 54000 ha acreage during 2017-18 giving a productivity of 22 tons/ha (MAFW, 2018).

US melons encompass the netted, salmon-flesh cantaloupe; the smooth-skinned green fleshed ‘Honey Dew’, the wrinkled-skinned, white-fleshed ‘Golden Beauty’ and several other dessert melons. Other forms with different fruit characters (white-fleshed, green-fleshed, having striped thin skin and juicy) are commonly found in India and in Orient as indigenous land-race cultivars. These are getting displaced by the cultivar types as cantaloupe, Madhuras and Galia due to their long shelf life.

Melon is mainly cultivated for the consumption of the fruits which can be harvested immature; in this case, the fruit is not sweet and can be eaten raw, cooked or pickled. In most cases, the fruit is harvested at maturity with high sugar content (mainly sucrose). Fruit is mainly eaten raw; marginal uses are cubes canned in syrup, in “fruits confits”, candies, ice-creams, biscuits and also in cosmetics. Locally, seeds can also be consumed (Pitrat, 2008).

ABSTRACT

Green technologies are required in the field of food processing and production in order to achieve food security and to reduce adverse environmental impact. Application of nano technology in food processing and production can advance the food safety and quality, increase the bioavailability of nutrients and thereby improving human health. Nanotechnology can be applied to achieve green perspective like development of biodegradable packaging materials thereby reducing adverse environmental effect. Use of naturally occurring nanoparticles as additives can reduce the use of chemicals in food products. This chapter deals with the potential of nanotechnology to achieve green aspects in food processing and production.Main focusses are on achieving food security and environmental sustainability. Chapter also describes about the principles of nanotechnology and methods to achieve green aspectin food sector with the application of nanotechnology. Application of nanotechnology in food processing and production along with safety, regulations and accompanying laws are discussed in this chapter.

ABSTRACT

The commencement of the 21^st century has endorsed an extended requirement for safe and wholesome food. The fact is that consumer preferences, awareness and their concern towards food safety have been tremendously increased. Therefore, inactivation of pathogenic microorganisms through any treatment becomes essential for food processors to ensure that food is free from disease causing microorganisms and parallelly unaltered with respect to its organoleptic, functional and nourishing characteristic. Food industries predominantly adopt thermal inputs for the preservation of food. Thermal methods, however, lead to unfavourable changes in organoleptic and nutritional attributes, more particularly proteins and vitamins. Hence, there has been continuous development and advances in finding alternatives to conventional processing. Cold plasma technology is one such technique. Plasma can be defined as a quasi-neutral ionised gas and is more commonly termed as 4^th state of matter. Advances in plasma engineering have made it possible to generate plasma at atmospheric pressure which ultimately resulted in broadening the spectra of research on cold plasma at various interfaces of biological sciences. This chapter summarises the overview of cold plasma technology processing, numerous findings related to its application in the area of food decontamination, food fortification, seed germination, milk and milk products and modification of starches.

Keywords: cold plasma, non-thermal, plasma chemistry, fortification, modification, germination, plasma generation, novel

ABSTRACT

The rapid growth in population has created the need of industrialization and as a result there has been a significant increase in milk production and processing. Milk is a commodity which is consumed by persons of all age groups due to its nutritive value and health promoting attributes. However, the rapid growth in dairy sector has adversely affected the environment by emitting various greenhouse gases and thereby, resulting in global warming. Apart from it, there has been an increased usage of non- renewable resources like natural gas and coal in dairy sector. As a result, a viable balance has to be maintained between milk production and processing, environmental health and the rapidly growing population. This can only be achieved with the application of green or environment friendly technologies in all the stages of milk production and processing. This chapter will mainly deal with the various sources of greenhouse gases from dairy sector and on application of life cycle assessment and carbon foot printing for computing the impact of greenhouse gases on the environment. Also, this chapter will enclose various green technologies which can be applied in dairy sector to curb the greenhouse gas emissions.

Keywords: Carbon footprint, LCA, Greenhouse gases, Green Technology, Milk production, Milk Processing