eChapters

Introduction

Guinea fowl has been domesticated in the recent past as a meat producing birds. Guinea fowl species are found across sub Saharan Africa. Guinea fowls found fairly in large numbers in wild type. Guinea fowl is from the family Numididae in the order Galliformes. They are endemic to Africa and rank among the oldest of the gallinaceous birds. Guinea fowls are hardy, sociable in habit, move in flock and thrive well in tropical as well as in temperate climates. They survive well even under the subsistence agriculture through scavenging. Guinea fowls are resistant to some of the diseases which may fatal to chicken. Guinea fowl meat is tender but slightly darker than that of chicken. Its special gamey flavor makes it a special table delicacy. Guinea fowl meat is drier and leaner than chicken meat and has a gamy flavor. They have marginally more protein than chicken or turkey roughly half the fat of chicken and slightly fewer calories per gram. Their eggs are substantially richer than those of chicken.

Guinea fowl are the insect and seed eating, ground nesting birds with featherless head. Under natural condition, they are monogamous in nature. Wild guinea fowl are strong flyer. Their breast muscle are dark, enabling them to sustain themselves in flight for considerable distances if hard situation. Guinea fowl hens are not known for good mother, but in the wild the guinea fowl cock may help the young keets during the day by keeping them worm and finding feed. Sometime more than one cock will help to raise the young.

Introduction

Pigeon are domesticated from 4500 B.C. Domestic pigeons are decedents from the wild pigeon, distributed in Rocky Ravines throughout the Asia and Europe. They are generally kept for ornamental purpose. The production of young meat pigeon provides alternatives income to the small farmers. Squabs are being reared as a side line in village, towns and on farms. Squab rearing can be made profitable source of income with good management and market. Squabs require little land since all breeders are kept in small pens and houses. There are fair demand of squabs in large cities like Delhi, Mumbai, Kolkata, Hyderabad, Chennai and Bangalore. Squab rearing also has tremendous export potential to Dubai, Australia, Thailand and Singapore. A pigeon is a tradition part of Middle Eastern country diet. In China, pigeon meat is a popular restaurant dishes and there is a good demand from Jewish Community clubs all over the world. Rearing of pigeon using modern methods is a very profitable than traditional way.

Pigeons have been a friend of man from early times. They utilize not only for ornamentation but to get cheap food for the table. Pigeon are versatile birds and used for Sport of racing pigeon, Flyers and performers, showing of fancy pigeons and Meat production. In the earliest art, many used pigeons to symbolize love, peace and loyalty.

Introduction

Geese are found all over the world. There is great demand for day old green gooseling. Currently it produces in various country, but about 80% of the world production from the France. Geese are well adapted to hot climates, shady areas and to high rainfall regions. They are especially well suited in warm, shallow and water ways. It is difficult to estimate the percent contribution of geese in poultry numbers, but it would be a fraction of 1%. This intended that, little effort has been made to improve the strains of geese in relation to their genetic capabilities. In future, breeders and producers are likely to take a more technical approach to goose production and need to give greater attention to breeding, feeding and general management.

Peculiarity of geese

Geese are mainly ornamental birds and good forager. They are capable for taking care of itself by foraging after reaching adult stage. Swimming water is not so essential. They can digest 40-45% fibre which is higher than other poultry. Geese kept as a watch dog in farms either by biting or making noise. Geese don’t need elaborate housing but is necessary to safeguard against predatory animal. Geese are hardy in nature and resistant to most of diseases. Meat is very palatable with great calorific value. Gander reared as weeders; for this 6 weeks old gooseling used. Gander eats grass and weeds as quickly as they appear but don’t eat crop. After weeding season, they are fed with fattening diet for 3-4 weeks and marketed. Age of sexual maturity is 24 month and produces 50-60 eggs/years. Hybrid varieties produce even 90 eggs and 60 gooseling per year. They are broody in nature. Egg weight is 200-250gm. Grow very fast greater than other species of poultry. Reach 3.2 kg at 6 weeks with feed efficiency of 2.5. At 9^th week have 4.5 kg body weight with feed efficiency of 3. Adult male of goose is called Gander. Sound produced by goose is called Honking. Young one of goose is called Gooseling.

Introduction

Earthworms have been exists on the earth from over 20 million years. Decomposition of organic material that may be plant or animal origin by earthworms is called vermicompost. The earthworm is a natural resource of fertility of soil. Earthworm is lives in the soil. They feed on decaying organic material. After digestion, the undigested material moves through the alimentary canal of the earthworm; and a thin layer of oil is deposited on the castings. This layer corrodes over a period of 2 months. Although, the plant nutrients are immediately available, they are slowly released to last longer period. The digestive process in the alimentary canal of the earthworm can transforms organic wastes to natural fertilizer. Vermicompost is an odorless, clean, organic material containing adequate quantities of N, P, K and several micronutrients essential for plant growth. Vermicompost is an ideal nutrient source for organic farming. It is eco-friendly, non-toxic, consumes low energy input for composting and is a recycled biological product. Vermicomposting has gained popularity in both industrial and domestic scenery because as compared with conventional composting, it provides a way to treat organic wastes more quickly. It generates a product which has a lower salinity levels, and therefore more beneficial to plant mediums. Vermicompost is nutrient rich organic fertilizers which also contain water soluble nutrients and soil conditioner in a form that is relatively easy to absorb for plants. Worm castings are nothing but organic fertilizers because the earthworms grind and uniformly mix minerals in simple forms. Plants need least efforts to obtain these nutrients from vermicompost. The worm digestive system creates environment that allow certain species of microbes to flourish to help for creating the “living soil environments for plants”.

The chemical changes in organic wastes undergo include deodorizing and neutralizing. The pH of the casting is 7 (neutral) and the casting is odorless. The worm casting contains bacteria, so microbial activity is promoted. Excellent quality of compost can be produced in ambient temperature condition in a short period of time by using proper species of earthworm. The earthworms promote faster decomposition of organic material as compared to compost pits without earthworms.

9.1. Molecular breeding and marker assisted selection

Using conventional breeding, developing new varieties takes atleast 15-20 years.

Molecular breeding shortened the time to 7-10 years.

One of the tools for faster variety development is Marker Assisted Selection (MAS).

MAS-refers to use of DNA markers to assist phenotypic screening.

Plants that possess particular genes or quantitative trait loci (QTL) may be identified based on their genotype rather than their phenotype.

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

2.1. Causes of pest outbreak

Activity of human beings which upsets biotic balance of ecosystem is prime cause for pest outbreak.

4.1. Black gram, green gram, lablab and cowpea

4.1.1. Bean aphid: Aphis craccivora (Aphididae: Hemiptera)

1. Host range: Groundnut, redgram, peas, beans, safflower, lablab, niger

6.1. Cotton

6.1.1. Leafhopper: Amrasca devastans (Cicadellidae: Hemiptera)

7.1. Early shoot borer: Chiloinfuscatellus snellen

1. Damage symptoms

10.1. Classification of pesticides

10.1.1. Based on organisms

1.1. Definition

Alteration in one or more of physiological processes culminating in a loss of coordination of energy utilization in a plant as a result of the continuous irritation due to presence or absence of some factor or agent.

A plant is said to be diseased when there is a harmful deviation from normal functioning of physiological process (Federation of British Plant Pathologists, 1973).

4.1. Agricultural production economics

An applied science, wherein principles of choice are applied to use of land, labour, capital and management in farming.

Explains conditions under which profit and output can be maximized and cost and use of physical inputs can be minimized.

1.1. Credit

Defined as a device for facilitating temporary transfer of purchasing power from those who have surpluses of it to those who are in need of it.

8.1. Kisan Credit Card (KCC)

Credit scheme introduced in August 1998 by Indian Banks.

Prepared by NABARD on recommendations of R.V.Gupta committee to provide term loans and agricultural needs.

KCC holders are covered under personal accident insurance up to Rs.50,000 for death and permanent disability and up to Rs.25,000 for other risk.

Premium is borne by both bank and borrower in a 2:1 ratio.

Validity period is five years with an option to extend for up to three more years.

2.1. Market structure

Refers to those organizational characteristics of a market which influence nature of competition and pricing, and affect the conduct of business firms.

Those characteristics of market which affect the traders behavior and their performances.

Formal organization of functional activity of a marketing institution.

A knowledge of structure is essential to identify imperfections in performance of a market.

8.1. Warehousing

8.1.1. Definitions

Defined as the assumption of responsibility for storage of goods.

Protector of national wealth, for the produce stored in warehouses is preserved and protected against rodents, insects and pests and against the ill effect of moisture and dampness.

10.1. Co-operative marketing

Private agencies dominate Indian food grains trade.

High marketing charges and prevalence of malpractices.

Progress of regulated markets is not uniform in all areas.

Need for strengthening co-operative organization in marketing of farmers produce and supply inputs at right price and time.

Instrumental methods of chemical analysis are the quantitative methods of analysis that use, as principal measuring devices, instruments other than those employed in conventional gravimetric and volumetric determinations.

The main basis for this method of analysis is the physical property of any particular element or compound being analyzed. These properties include:

Only a very brief mention of various basic aspects of plant nutrition is given here. Associates wanting to know more details should refer to any one of the standard Plant Nutrition publication (PRINCIPLES OF PLANT NUTRITION by K. Mengel and E.A. Kirkby).

Increased production of food and cash crops is the need of our times; as land and irrigation water are limited and beyond any means of expansion. Crop yields per unit input should increase. Crop yield under natural production systems is limited by the availability of nutrients in the soil. Unless the supply of nutrients can be enhanced yields cannot be high.

Although the application of fertilizer to even fairly fertile soils can give a great increase in crop yield, soil fertility is not simply a matter of nutrient content. It is dependent on a number of complex of issues:

Soil depth

The volume of soil from which the crop draws its nutrition varies according to the rooting depth of the crop. However hard or rocky layers can restrict natural root development; this is particularly the case with micro irrigation systems.

Soil structure

Particle size and soil aggregate size and distribution, effect the size and distribution of pores and therefore the availability of air and water to the roots.

Knowledge of fertilizer dose, selection of fertilizer sources, time and method of application is essential for achieving efficient use of fertilizers and profitable yield.

A. Fertilizer Dose

Fertilizer dose for crops is determined based on the field experimentation. It varies with the crops and varieties, initial fertility of the soil, soil properties, cropping system, climate, season, rainfed or irrigated crop, expected yield etc. Fertilizer dose for rainfedcrops (Kg/ha)

The term Rainfed agriculture is used to describe farming practices that rely on rainfall for water. It provides much of the food consumed by poor communities in developing countries. In India, about 52% of total net sown area comes under rainfed lands. Rainfed crops account for 48 per cent area under food crops and 68 per cent under non-food crops. India ranks first among the rainfed agricultural countries of the world in terms of both extent and value of produce. Due to population pressure on agricultural lands, the poverty is concentrated in rainfed regions. The climate in India’s rainfed regions is characterized by complex climatic deficiencies, manifested as water scarcity for rainfed crop production. The climate is largely semi-arid and dry sub-humid with a short (occasionally intense) wet season followed by long dry season. Rainfall is highly unreliable, both in time and space, with strong risks of dry spells at critical growth stages even during good rainfall years. The fluctuations are due to numerous factors affecting the monsoonal climate including the atmospheric circulation and strong links to El-Nino Southern Oscillation (ENSO) phenomenon in the Pacific Ocean.

Rainfed areas in India are highly diverse, ranging from resource rich areas to resource-constrained areas. Some of the resource rich areas are highly productive and have experienced widespread adoption of technology. However, most of the areas are resource constrained and dry areas. In the resource constrained and dry areas, the farming is a survival mechanism rather than a growth oriented activity. Rainfed agriculture is practiced under a wide variety of soil type, agro-climatic and rainfall conditions ranging from 400 mm to 1600 mm per annum. Rainfed Crops are prone to breaks in the monsoon during the crop growth due to water stress. This water stress may be due to variability of rainfall, delay in sowing, diversity in crop management practice and variability of the soil type. The prolonged breaks can result in partial or complete failure of the crops.

Strategies To Improve The Productivity Of Drylands

With renewed interest in rainfed agriculture during 1970s, both the national (AICRPDA and CRIDA) and international institutions (ICRISAT) have studied several aspects of rainwater management. Recommendations have been made after their through testing both at the research stations and on farmer’s fields. Initially these technologies were accepted by the farmers because of the pursuasion by the Scientists and the incentives, but many of them are forgotten once the support is withdrawn. It is now time for us to examine whether the technologies themselves were weak or certain components were missing. Malfunctioning of the software may be due to a bug right from the beginning or it entered into the system at a later stage. It is also possible that we neglected certain critical inputs which became major constraints making the system defunct. Whatever the reason it should be identified and set right if the technology has to continue as tool for tackling the challenges of rainfed agriculture.

R software is a programming language used for statistical analysis, graphical representation and reporting, and is currently developed by the R Development Core Team. R software is available freely under the GNU General Public License, and the binary versions are provided for the Windows, Linux and Mac operating systems. To develop R, effort from all over the world is made in a collaborative manner.

What is GNU?

GNU stands for GNU’s Not Unix. It is a Unix like computer operating system, but different from Unix. GNU consists of GNU packages which are program specific and released by GNU project. Free software means that the users of the software have freedom to run and use the software and also can copy, change, improve and distribute the software freely.

Development of R

R software was initially written by Robert Gentleman and Ross Ihaka also known as “R & R” of the statistics department of the University of Auckland, New Zealand. R appeared first in 1993. Since then various contribution to R has been made by a large group of talented individuals by sending code and bug reports. A core group, known as the “R Core Team” modify the R source code archive since 1997. Thus R is a collaborative project with many contributors.

ESSENTIAL ELEMENTS FOR PLANT GROWTH

Arnon (1954) set three criteria to state an element is essential to plants. They are:

1. The plant must be unable to grow normally or complete its life cycle in the absence of the element,
2. The element is specific and cannot be replaced by another and,
3. The element plays a direct role in metabolism.

Accordingly there are 16 elements essential for plant growth. They are carbon, hydrogen and oxygen called primary nutrients, calcium, magnesium and sulphur called secondary nutrients; iron, zinc, manganese, copper, boron, chlorine and molybdenum are known as micronutrients.

Plants are the generators or the primary source of organic matter while animals are the transformers- secondary source of organic matter. In agriculture, plants add 10–30 percent of organic matter through their roots stubbles and leaf fall and exudations. The excreta of livestock, the organic wastes of urban and rural residential areas include the garbage and sewage and sludge. The by products of agro based industries viz. bagasse, vinasse, pressmud from sugar industries, the coir dust from the coir industries, dust of cotton from ginning industries, the fruit and food processing industries wastes.

Integrated plant nutrition system conceptualized by food and agriculture organization is the maintenance or adjustment of soil fertility and of plant nutrient supply to an optimum level for sustaining the desired productivity through optimization of benefits from all possible sources of plant nutrients viz. organic manures, fertilizers, crop residues, compost or nitrogen fixing crops etc. in an integrated manner.

Soil fertility depends on the physical, chemical, and biological properties of the soil. Among the biological properties, soil enzymes are used as an index of soil fertility. Soil enzymes respond to changes in soil management faster in comparison to other soil variables, and also catalyze the reactions necessary for the life processes of microorganisms in soils. The biochemical reactions are brought about by the catalytic action of enzymes. Soil enzymes include amylase, phosphatase, urease, cellulase, protease, glycosidase, and arylsulfatase. They play a role in organic material decomposition, the transformation of organic matter, nutrient cycling, nitrogen fixation, detoxification of pesticides, xenobiotics, etc., and thus regulate the ecosystem.

Depending on their location, enzymes can be extracellular or intracellular. Intracellular enzymes are found in the cell’s cytoplasm or bound to the cell walls of living and metabolically active cells. Extracellular enzymes released into the soil and are “permanently” immobilized on clay and humic colloids via ionic interactions, covalent bonds, hydrogen bonding, entrapment, and other mechanisms. There are two kinds of soil enzymes.

Soil microorganisms are the most important agents in the cycling or transformation of various elements (N, P, K, S, Fe etc.) in the biosphere; where the essential elements undergo cyclic alterations between the inorganic state as free elements in nature and the combined state in living organisms. Life on earth is dependent on the cycling of nutrient elements from their elemental states to inorganic compounds to organic compounds and back into their elemental states.

The microbes through the process of biochemical reactions convert / breakdown complex organic compounds into simple inorganic compounds and finally into their constituent elements. This process is known as “Mineralization”.

Mineralization of organic carbon, nitrogen, phosphorus, sulphur, and iron by soil microorganisms makes these elements available for reuse by plants. In the following paragraphs the cycling or transformations of some of the important elements are discussed.

Phosphorus is only second to nitrogen as an inorganic nutrient required by both plants and microorganisms. It stimulates growth of young plants, giving them a good and vigorous start. Phosphorus management and nutrition has both economic and environmental implications. Phosphate constitutes nearly 0.1% of the earth’s crust. They occur in soil in inorganic and organic forms. The organic phosphorus containing compounds are derived from plants and microorganisms and are composed of nucleic acids, phospholipids, lecithin, phytin and related compounds. In soil, 15-85 % of the total P is organic and soils rich in organic matter contain abundant organic P. The inorganic forms are derived from parent rocks or through fertilizers application and manuring with bone meal. They are soluble in water when present as phosphates of Na, K, Ca, Mg etc. Phosphorus exists mainly as apatites, with the basic formula M₁₀ (PO₄) ₆ X₂. Commonly the mineral (M) is Ca, less often Al or Fe. The anion (X) is either F^-, Cl^-, OH^- or CO^2- ₃. Diverse combinations of M and X results in 200 forms of P.

It is a major constituent of nucleic acids in all living systems essential in the accumulation and release of energy during cellular metabolism. This element is added to the soil in the form of chemical fertilizers, or in the form of organic phosphates present in plant and animal residues. In cultivated soils it is present in abundance (i.e. 1100 kg/ha), but most of which is not available to plants, only 15 % of total soil phosphorus is in available form. Both inorganic and organic phosphates exist in soil and occupy a critical position both in plant growth and in the biology of soil.

Microbial transformations of sulfur (S) are even more complex than those of nitrogen because of the large number of oxidation states of S and the fact that several transformations of S also occur abiotically. Although a number of oxidation states of S are possible, only three are significant in nature, 2 (sulfhydryl, R–SH, and sulfide, HS-), 0 (elemental sulfur, S0), and 6 (sulfate, SO₄ 2-). The bulk of S Earth’s S is in sediments and rocks in the form of sulfate minerals, primarily gypsum (CaSO₄) and sulfide minerals (pyrite, FeS2), but the oceans constitute the most significant reservoir of SO₄ ^2- in the biosphere. A significant amount of S, in particular sulfur dioxide (SO₂), enters the S cycle from human activities, primarily the burning of fossil fuels.

Hydrogen Sulfide and Sulfate Reduction

A major volatile S gas is hydrogen sulfide (H₂S). Hydrogen sulfide is produced from bacterial sulfate reduction or is emitted from sulfide springs and volcanoes. Although H₂S is volatile, different forms exist depending on pH: H₂S predominates below pH 7 and the nonvolatile HS- and S^2- predominate above pH 7. Collectively,H₂S, HS, and S₂ are referred to as “sulfide.” Sulfate-reducing bacteria are a large and highly diverse group and are widespread in nature. However, in anoxic habitats such as freshwater sediments and many soils, sulfate reduction is SO₄ ^2- limited. Moreover, because organic electron donors (or H₂, which is a product of the fermentation of organic compounds) are needed to support sulfate reduction, it only occurs where significant amounts of organic material are present.

The spermosphere represents a short-lived, rapidly changing, and microbiologically dynamic zone of soil surrounding a germinating seed. It is analogous to the rhizosphere, being established largely by the carbon compounds released into the soil once the seed begins to hydrate. These seed exudations drive the microbial activities that take place in the spermosphere, many of which can have long-lasting impacts on plant growth and development as well as on plant health.

Soil is the largest terrestrial ecosystem where a wide variety of relationships exists between different types of soil organisms. The associations existing between different soil microorganisms, whether of a symbiotic or antagonistic nature, influence the activities of microorganisms in the soil. Microflora composition of any habitat is governed by the biological equilibrium created by the associations and interactions of all individuals found in the community. In soil, many microorganisms live in close proximity and interact among them-selves in a different ways. Some of the interactions or associations are mutually beneficial, or mutually detrimental or neutral.

Chemical pesticides though extremely effective in controlling pest population suffer from disadvantages. They have a broad toxic range and potentially toxic to non target organisms. Other constraints that have emerged with the use of chemical pesticides such as development of resistance and resurgence in insects, residual toxicity, secondary outbreak of minor insect pests, etc., In this juncture, the biopesticides have proven to be effective tool in managing the devastating insect pests of various crops.

The biopesticides are types of pesticides derived from natural materials such as microorganisms, plants, animals and certain minerals. They are living organisms or their products or byproducts, which can be used for the management of pests that are injurious to crop plants. Biopesticides have a vital role in crop protection, although most commonly in combination with other tools including chemical pesticides as part of integrated pest management (IPM). Microorganisms help to regulate the abundance of many pests or potential pests without any cost to society. Microbes can be increased artificially and thereby achieve faster, higher and more consistent control of the target pests that will occur naturally. Insect pathogens that are transmissible in nature from one host to another offer an important bonus effect that chemical insecticides do not have. A pathogen will kill pests exposed and many continue killing them by natural transmission from one individual host to another through subsequent host generation.

Biopesticides generally have several advantages compared to conventional pesticides. While chemical pesticides are responsible for extensive pollution of the environment, a serious health hazard due to the presence of their residues in food and development of resistance in targeted insect pest populations, biopesticides, in contrast, are inherently less toxic to humans and the environment, do not leave harmful residues, and are usually more specific to target pests. The agents employed as biopesticides, include parasites, predetors and disease causing fungi, bacteria and viruses, which are the natural enemies of pests. Utilization of naturally occurring parasites, predators and pathogens for pest control is a classical biological control. These bio agents can be conserved, preserved and multiplied under laboratory condition for field release. Once these bio-agents are introduced in the field to build their population considerably, they are capable of bringing down the targeted pest population below economic threshold level (ETL).

Weed control in agriculture disturbs the farming. Weed management and control essentially increase productivity of the farm. Autonomous robots for weed control systems are gaining a lot of attention. Adaptability of effective weed control robots has the potential to bring evolution in the areas of weed species, genetics and climate conditions. Weed control is one of the major challenges in agriculture. Removal of weeds from farming land required a lot of human effort. To minimize the weed growth pesticides and chemicals are used which is very harmful. In order to make this process easy and reliable robots are used nowadays. Robots are specially designed to detect the weeds and remove them within a stipulated time period. Robots are programmed using various algorithms to do this task in an efficient way without human efforts. This chapter illustrates the use of modern robots in weed control to help the farmers to gain maximum profit and healthy concerns without using chemicals to do so.

10.1 Introduction

Over the time, weed control in a farming land has been an issue. Evolution in technologies in the area of agriculture brought a lot of innovations. Among these robots are one of the innovations to be implemented in agriculture to enhance profitability and reliability with minimum human resource. The robots are deployed to monitor the farming land from weeds and try to remove these. Due to which uses of agrochemicals reduced down the timeline. When precision farming came into the picture robots are the best use cases. An autonomous mechanical robot was used to remove the weed from farming land. Robots are equipped with sensor modules, actuators and IoT enabled which makes the things very easy to control from remote area with commands [4].

Food is a complex system of inorganic and organic compounds. These compounds are present in food in unique combination and uniquely organized structures, and therefore, every type of food has unique characteristics, nutritive value, sensory quality, texture, etc. Food items are always in physical, chemical and biological dynamics, however rate of change vary from food to food. Those highly perishable in nature undergo faster rate of spoilage as compare to those semi-perishable or stable. Foods are affected by nearly every variable of environment. Heat, cold, light or other radiations, oxygen, moisture/dryness, natural food enzymes, microorganisms, macro-organisms, industrials and agricultural contaminants, time, etc. - all adversely affect the foods resulting to its spoilage or deterioration. Spoilage may be referred to the losses in nutritive value, sensory desirability, safety and aesthetic appeal to the unacceptable level. Level of unacceptability is the subject of socio-economic status and policies of the state. A food which is of unacceptable quality for one society may be of acceptable quality for other society.

History reveals that food was the root cause of many wars and also the battles were won or lost over food spoilage and its control. Wars and the need to provide safe food to armies in the region far away from the areas of their production have always focused attention on the problem of food spoilage, and this valid today even. Some of the most important advancements in the technology of food preservation were made during the war-time. Of these, most important was the technology of preventing food from spoilage for months together developed by French scientist Nicolas Appert for French army. He won awarded money of 12,000 Francs in 1908 for this. The World learnt the art of canning foods in which the food is packed in a sealed metal container and heated sufficiently. He, however, could not explain the principle behind the preservation by canning. Some 50 years later, work of Louis Pasteur explained that the growth of microorganisms was the major cause of food spoilage which are killed in Appert’s method of preservation.

A watershed is a geohydrological unit or all the land and water area bounded by a divide which contributes runoff to a common point. Watershed is considered to be synonymous with ‘catchment basin’ and ‘drainage basin’. In watershed management approach, development is not only confined to agricultural lands but also covers the area, starting from the highest point of the land to the outlet of the natural stream. Watershed management becomes increasingly important as a way to improve livelihood of people while conserving and regenerating their natural resources.

Watershed management is the process of creating and implementing plans, programmes and projects to sustain and enhance watershed functions that affect the plant, animal and human communities within a watershed boundary. It implies the judicious use of all the resources, i.e., land, water and vegetation in an area to prevent soil erosion, improve water availability and increase food, fodder, fuel and timber on sustained basis.

India shares 17.4% of the world population, while its land is only 2.4% of the total geographical area of the world. Naturally, the pressure on the land is often beyond its carrying capacity. Therefore, the productive lands, especially the farmlands in India are in the constant process of various degrees of degradation and are fast turning into wastelands. At present, approximately 55.76 million hectare area of the land is lying as wastelands in India. Out of these lands, about 50% lands are such non-forest lands, which can be made fertile again if treated properly. In the last 60 years India’s lush green village forests and woodlots have been deforested to the maximum. To restore this ecological imbalance by developing the degraded non-forest wastelands, Government of India had created the Department of Wasteland Development during July, 1992 under the Ministry of Rural Development, which has been subsequently reorganized and renamed Department of Land Resources, with a broader mandate.

National Wasteland Development Board was established in 1985 mainly to tackle the problem of degradation of lands, restoration of ecology and to meet the growing demands of fuelwood and fodder at the national level. The Board was reconstituted in August, 1992 and was made responsible for development of wastelands mainly in non-forest areas in totality by involving local people at every stage of development. It aims at creating a scenario where the Government acts as a facilitator and the people at the grass root level become the real executioner of the programme. The degradation of environment in the fragile Indian subtropical ecosystem is basically attributed to the following factors.

Greenhouse gas emission is likely to rise by 25-90% by 2030 relative to 2000 and the earth could warm by 3° C at the end of this century. Even with a temperature rise of 1-2.5° C, the Intergovernmental Panel on Climate Change predict serious disastrous effects, including reduction in crop yields in tropical and subtropical areas leading to increased risk of food shortage, spread of climate responsive diseases such as malaria, and an increased risk of extinction of 20-30% of all biodiversity present on earth (IPCC, 2007). Carbon dioxide is the most important among all greenhouse gases. Carbon sequestration may be defined as the process of removing C from the atmosphere and depositing it in a reservoir. It entails the transfer of atmospheric carbon dioxide, and its secure storage in long-lived pools (UNFCCC, 2007).

From the agroforestry point of view, carbon sequestration involves primarily the uptake of atmospheric CO₂ during photosynthesis and transfer of fixed carbon into vegetation and soil pools for ‘secure’ storage. It occurs in two major segments of agroforestry systems; aboveground and belowground. The total amount sequestered in each part differs greatly depending on a number of factors including the region, the type of system, site quality, and previous land-use (Nair, 2012). On average, the soil and aboveground parts are estimated to hold major portions, roughly 60 and 30%, respectively, of the total carbon stored in tree-based land-use systems (Lal, 2010). Sequestering CO₂ from atmosphere through natural techniques such as afforestation, reforestation, natural regeneration of forests and the adaptive agriculture is more economically and ecologically sound in increasing the carbon storage capacity of the terrestrial ecosystems (Dhyani, 2014). Although carbon sequestration through afforestation and reforestation of degraded natural forests has long been considered useful in climate change mitigation, agroforestry offers some distinct advantages (Murthy et al., 2013). The carbon in the aboveground and belowground biomass in an agroforestry system is generally much higher than the equivalent land use without trees. An agroforestry system has higher carbon sequestration potential than pastures or field crops (Kirby and Potvin, 2007).

C₃ cycle or Calvin cycle: It is a process of dark reaction of photosynthesis. It is also called as photosynthetic carbon reduction cycle which results in the production of sugars. It occurs not only in C₃ plants but also in C₄ and CAM pathway also. It occurs in the mesophyll cells. It is described in three stages: (1) Carboxylation, (2) Reduction, (3) Regeneration.

C₃ plants: Group of plants with calvin cycle wherein the first stable product is 3-phosphoglyceric acid, a three carbon compound. e.g., rice, wheat, barley.

C₄ cycle: C₄ cycle may also referred to as the dicarboxylic acid cycle or Hatch and Slack Cycle. The first stable product is a C₄ compounds like oxaloacetic acid. Here CO₂ molecule is accepted by phosphoenol pyruvate in the carboxylation reaction. The main purpose of this cycle is carbondioxide enrichment.

C₄ plants: Plants with Hatch-slack pathway and kranz anatomy of leaves in which the first stable product is four carbon compound, oxaloacetic acid. These plants posses high photosynthetic efficiency and low photorespiration rate. e.g., sugarcane, maize, sorghum.

The World Vegetable Center (previously called as Asian Vegetable Research and Development Centre, AVRDC) with headquarter at Shanhua, Taiwan conducts research, builds networks, and carries out training and promotion activities to raise awareness of the role of vegetables for improved health and global poverty alleviation. Vegetables can alleviate poverty by creating new jobs and new sources of income for farmers and landless laborers, improve health by providing essential micronutrients lacking in diets, enhance learning and working capacities of adults and children through improved diets and health, and improve the sustainability of food production practices by diversifying cropping systems. The Center’s research and development work focuses on breeding improved vegetable lines, developing and promoting safe production practices, reducing postharvest losses, and improving the nutritional value of vegetables (https://avrdc.org). The centre’s mission is Research and Development to realize the potential of vegetables for healthier lives and more resilient livelihoods

Predation and cannibalism are entirely two different processes. In predation, the animal used to consume other species then their own, whereas cannibalism is a practice of eating one’s own kind. Cannibalism is a common behavior in animal kingdom and has been recorded in more than 1500 species. It is reported in an increasing number of fish species belonging to group/ families such as air-breathing catfishes (Clariidae), pikes (Esocidae), percids (Percidae), characids (Characidae), latids (Latidae), gadids (Gadidae) and in over 30 other families, including cyprinids (Cyprinidae) and salmonids (Salmonidae) (Smith & Reay, 1991; Hecht & Peinaar, 1993; Folkvord, 1991; Baras, 1998; Qin et al., 2004). Cannibalism is a common ecological interaction and depends on genetics and fish behavior; mediated by appetite and metabolism and is promoted by size differences, and is more intense among fast growing larvae and young juveniles than among older fish (Hecht and Pienaar, 1993; Baras, 1998).

Cannibalism is a serious problem in the farming of striped murrel that starts from the early larval stage (Ng and Lim, 1990) and continues at all sizes including during parenting also. Murrels have large mouth gape; sharp jaw teeth for catching & grasping prey and can consume prey fish more than half to two-third of its length (Wee, 1981; Diana et al., 1985; Ng and Lim, 1990 and Qin and Fast, 1996). Its aerodynamic body shape allows fast movement in water and catching the prey with ease. Striped murrel observes two types of cannibalism, Filial and Intracohort, which is discussed in detail in the subsequent sections.

Stocking fingerlings in grow-out ponds increases survival rates, cut-down culture duration, better feed management and reduce risk-factors on account of natural as well disease occurrence. In pond culture, good amount of fry-size seed suffer predation from enemies such as snakes, birds and predator fishes, if any and mortalities due to disease occurrence as smaller size fish is more vulnerable. However, fingerling stocking reduces predation loss to a greater extent, increase survivals, allow better feed management and highe production. This is truer with carnivorous fishes and particularly those observe cannibalism. Qin and Fast (1996) stated that the rate of cannibalism is higher in small size (TL) predators than the larger in case of striped murrel, so stocking large size fingerling in culture ponds reduces chances of ICC and hence recommended for grow-out production.

7.1 Traditional Methods of Fingerling Rearing

Wee (1981) has defined traditional system of murrel farming in Thailand in which seed of murrel was procured from wild resources and raised to large fingerling size before stocking. Two type of practices being used to raise fingerlings. In the first one, the pond(s) designated for fingerling production are stocked with brooders of SFs so they could spawn in the stocking pond(s) few days before the stocking of striped murrel fry and could directly feed upon the juvenile SFs. In second system, the fingerlings were reared to accept small-size fish (SF) along with rice bran to cut down cost of feeding on production of fingerling. In recent, more systematic approaches have been made to wean the seed collected from the wild resources on inert diets totally. The protocol adopted for weaning the fingerling on inert diet includes initial feeding with cut pieces of SFs and then gradual supplementation of inert diet till fingerlings start relishing inert diet completely.

Introduction

Resource Conserving Technology refers to any management approach or technology that increases factor productivity including land, labour, capital and inputs. The resource conserving technologies (RCTs) involving no or minimum tillage, direct seeding, bed planting and crop diversification with innovations in residues management are the possible alternatives to the conventional energy and input-intensive agriculture. The RCTs with innovations in residue management avoid straw burning, improve soil organic C, enhance input efficiency and have the potential to reduce GHGs emissions (Pathak et al., 2011). Conservation agriculture is one the effective Resource Conservation Technologies, which is based on three principles which are minimum soil disturbance, maintenance of permanent soil covers by the use of crop residues and cover crops and diverse plant associations which included crop rotations. Globally, Conservation Agriculture is being practiced in about 125 M ha area. USA with 26.5 M ha contributes to the major CA-practicing countries followed by Brazil (25.5 M ha), Argentina (25.5 M ha), Canada (13.5 M ha) and Australia (17.0 M ha). However, in the context of climate change to increase the production and productivity, India’s CA adoption is still in preliminary phases in area of 1.5 million ha with adoption of Zero Tillage (Jat et al., 2012, www.fao.org/ag/ca/6c.html). The major CA-based technologies being adopted is zero-tillage (ZT) wheat in the rice-wheat system of Indo-Gangetic Plains.

Introduction

Persistent income from agriculture is most important for sustaining the farming sector. Conservation agriculture (CA) is a resource-saving agricultural production system that aims to achieve production intensification and high yields while enhancing the natural resource base through compliance with three interrelated principles, along with other good production practices of plant nutrition and pest management (Abrol and Sangar, 2006). Conservation agriculture is largely promoted as one of the few win–win technologies affordable to farmers, in the sense that potentially it improves farmers’ yields (in the long term) at the same time conserving the environment. CA is described by FAO (http://www.fao.org.ag/ca) as a concept for resource saving agricultural crop production which is based on enhancing the natural and biological processes above and below the ground. As per FAO definition CA is to a.) Achieve acceptable profits, b.) High and sustained production levels, and c.) Conserve the environment. It aims at reversing the process of degradation inherent to the conventional agricultural practices like intensive agriculture, burning/removal of crop residues. Shifting from tillage-based agriculture to no-tillage CA systems removes unsustainable elements in the current tillage based systems and replaces them with CA elements that make the production systems profitable and ecologically sustainable. Conservation agriculture offers an opportunity for arresting and reversing the downward spiral of resource degradation, decreasing cultivation costs and making agriculture more resource – use-efficient, competitive and sustainable.

In modern agriculture, use of synthetic chemical fertilizers are essential in agriculture for sustainable yield but, these have resulted in environmental pollution. The use of synthetic fertilizer could result in serious human health issues and also affects the soil microflora, besides being costly due to high production cost. Further, excess use affects soil processes and result in nutrient imbalances in plants with increased susceptibility to pests and diseases and also affects the symbiotic associations. Under these circumstances, biofertilizers could be an alternative for integrated nutrient management system in horticulture. The entire crop production system depends on soil beneficial microflora and their activities, which makes them highly potential alternatives to synthetic chemical fertilizers.

Biofertilizers or microbial fertilizers are essential for eco-friendly and sustainable cultural practices. The term “biofertiliser” has been defined in several ways due to its unique relationships between the plant and rhizosphere microflora. Biofertilizers mainly include nitrogen fixing bacteria, phosphate solublizing and potash solubiling bacteria.

The soil fertility is depleting in the current scenario of gap between nutrient removal from soil and supplies. Moreover, increase in the fertilizer prices has become unaffordable to small and marginal farmers. There is also a growing concern about the environmental hazards and its threat to sustainable crop production. Indiscriminate use of synthetic fertilizers for intensive crop production has resulted in large quantity of nutrient (particularly P) accumulation in soils which has resulted in generating a dead soil. In this context, the long term use of biofertilizers are considered to be economical, eco-friendly, more efficient, productive and accessible to marginal and small farmers over chemical fertilizers (Subba Rao, 2001). Biofertilizers mainly consists of specific living cells which supplies nutrients to plants through their root system. Microbes in these fertilizers provide nutrients to the plants by nitrogen fixation, phosphate solubilization, phosphate mobilization, and promotion of beneficial rhizobacteria (Bhat et al., 2010). Biofertilizer application improves the supply of nutrients, organic carbon, accumulation of soil enzymes, productivity, soil fertility index, economy of farmers, and maintenance of sustainability in natural soil ecosystem and horticultural crops. The production of efficient and sustainable biofertilizers for crop plants needs to be undertaken to make the biofertilizers popular and efficient. The important and specific research in future may be focused on the following aspects.

Bone is an integral part of musculo-skeletal system of body. In the living animal it is bluish pink, whereas, fresh dead bone is yellowish-white in colour. It is hard and resistant to pressure but also have certain amount of elasticity. Its tensile strength is equal to the cast iron, though bone three times lighter and ten times flexible to cast iron.

Number of bones: The number of bones of the skeleton varies with age and species. Number of bones in cattle-210; Horse-208; Dog-271; Fowl-166 and human-208 (207-212)

Composition of bone: Bone contains different bone cells, organic and inorganic matrix and water. Organic matrix is about one-third and Inorganic matrix is two-third weight by volume. The organic material consists of 90% collagen [type-I (maximum), type V and type XII] and 10% non-collagenous glycoprotein and bone specific proteoglycans (osteocalcin, osteonectin, sialoprotein, bone phosphoproteins and small proteoglycans) and bone growth factors [TGF-beta family; Insulin-like growth factor-1, 2; bone morphogenetic protein (BMP); platelet derived growth factor (PDGF); Interleukin -1 (IL-1); Interleukin-6 (IL-6); colony stimulating factor]. Organic matrix of bone resembles the matrix of dense fibrous tissues such as tendons, ligament and joint capsule. It is not certain whether all of these proteins are synthesized by bone cells or whether they are synthesized by cells outside of the bone and then incorporated into the bone matrix. However, their presence within bone and their potential to affect the activity of bone cells suggests they have important role in controlling bone cell functions. Inorganic matrix of bone or mineral component of bone serves as an ion reservoir and gives bone of its stiffness and strength. It reserves 99% of body calcium, 85% body phosphorus and 40-60% body sodium and magnesium. Inorganic matrix of bone is composed of 85% calcium phosphate, 12% calcium carbonate, 3% of magnesium phosphate, calcium fluoride and magnesium carbonate. It also contains traces of chlorine, sodium, potassium. These minerals remain as hydroxyapatite crystal form within bone. However, bone mineral crystal is not pure hydroxyapatite, instead they contain both carbonate and acid phosphate groups (HPO₄) and bone crystal does not contain OH groups. Bone matrix has such great durability and stability that it can remain essentially unchanged and retain much of its strength for centuries after death. Removal of organic matters renders the bone fragile, brittle and shattered, whereas, decalcification renders bone soft and pliable and resistant to fracture.