eChapters

Innate immunity or innate immune response is a set of non-specific or less specific mechanisms which provides the first and rapid line of defense. All such mechanisms exist prior to the exposure to a pathogen i.e. before the onset of the infection. It is also called inborn or innate immunity. The different components of the innate immunity like physical barriers, chemical barriers, phagocytosis, inflammation etc. act to prevent the entry or elimination of the microorganisms in a non- specific manner.

Humoral immune response is the immune response which is mediated by antibodies.. It is called humoral immune response because antibodies are transferred with the ‘humour’ that is fluid or blood. Antibodies are the proteins produced by B lymphocytes.

The complement system is a group of about 30 heat labile plasma proteins which constitute nearly 15% of total serum proteins. It is a system of plasma and membrane-associated serum proteins which can elicit a highly efficient and regulated inflammatory and cytolytic immune responses to different types of infectious organisms.

Major Histocompetibility Complex (MHC) is a closely linked cluster of genes which have codes for cell surface proteins known as MHC molecules. MHC molecules were previously called as HLA molecules. Since these molecules were first discovered on the leucocytes, these were called human leukocyte antigen or HLA molecules.

Heat engines - A device which change heat received by fuel combustion into mechanical work is called a heat engine. It may be classified into two broad categories viz. are Internal and external combustion engines.[8]

Acids are chemical substances that are sour in taste and highly corrosive. The term ‘Acid’ was derived from a Latin word ‘acidus’, meaning ‘sour’. They emit sharp odour and transform litmus colour from blue to red. They lose their properties when alkalis are added to them. However, in this process, alkalis also lose their alkaline properties.

Since our existence, we practiced to be fit and fine with the food as a single option traditionally to cure ourselves also which we come to know about their selection with long term experiences. It is a type of diet therapy where food works like medicine. Presently, we practice the same through medicinal diet therapy where selected foods and food supplements are suggested to be taken with medicine for longevity promotion and fit (Zou, 2016).

Blossom end rot is a very common problem on green and ripe tomatoes. It started with light tan, water-soaked lesion, and then increased to black and tough. Although blossom blight itself caused only local damage, secondary biological invasions frequently lesions caused fruit rot complete.

Viral diseases causing problems to the routine performance of the wild animals are caused substantially by many viral agents also

Predominantly, an agrarian society is mostly dependent on the farm sector. Agriculture plays an important role in Indian economy notwithstanding its shrinkage in share in the gross domestic product (GDP) of the country being 55.4% in 1950-’51 and 17.4% in 2018-’19 (Tripathy, 2019). Still the agriculture and allied sector is providing employment to 54 percent of the Indian population.

As the flow properties of liquids play such an essential role in our daily lives, whether intentionally or unintentionally, no one is truly an absolute beginner when it comes to rheology. Consumers not only focus on new and improved products but also consider the texture of the products e.g thick and creamy

In the Modern era of globalisation, a wide variety of miscellaneous bakery products are available. It is hard to acknowledge all of them in this chapter due to the unlimited specialities of bakers across the world. The writing here in this chapter is limited to formulation & technology used for the production of buns, pizza base, chapatti, wafers, pretzels, crackers and muffins individually.

In vitro cloning is a vegetative propagation performed in the Plant Tissue Culture system. In vitro micropropagation cloning propagation is mostly applied to the vegetatively propagated plants and in particular in ornamental, fruit and in a few orchard crops and in vegetable crops besides in many forest tree species.

It is used in the control of bacterial leaf spots, blights, and cankers mostly on fruits crops and ornamentals. The Bordeaux mixture, however, can cause burning of leaves or russeting of fruit such as apples when applied in cool, wet weather. The phytotoxicity of Bordeaux is reduced by increasing the ratio of hydrated lime to copper sulfate. Copper is the only ingredient in the Bordeaux mixture that is toxic to pathogens and, sometimes, to plants, whereas the role of lime is primarily that of a “safener.”

Sixteen chemical elements are known to be important for a plant growth, their metabolic activities and survival. These can be divided in to two main groups

Canopy manipulation in fruit crops has a seasonal and a life-time development pattern and have lifelong advantage and disadvantage. The unmanaged canopy of fruit trees poses many difficulties i.e. difficulty in spray, pruning and hand harvesting, poor light penetration and interception throughout the canopy. Low early light interception, leaf area index and fraction of land covered by canopy, leading to delayed and poor cropping.

‘Extension’ acts as a potential link between ‘research’ and ‘teaching’ which also facilitates transfer of technology. In this context new concepts, like Rapid Rural Appraisal (RRA) and Participatory Rural Appraisal (PRA) are becoming more meaningful now-a-days.

Rapid Rural Appraisal (RRA)
i) RRA can be defined as a systematic but semi-structured study, carried out in the field by a multi-disciplinary team over a short period ranging from three days to three weeks, based on information collected in advance from published and/or unpublished sources, direct observations and interviews as to generate working hypotheses for subsequent action
ii) RRA study aims at generating information on rural life and conditions that is relevant, timely, accurate and usable in

Basic thought of Sampling

The data is very important in every field for decision making whether it is medical sciences, engineering sciences, agricultural sciences and management sciences etc. for this we need to plan the correct data. If we don’t have correct data then based on that we cannot plan good decisions and it will provide misleading results. So, to achieve or plan the right data it is necessary to have the right technique which is to be used while collecting data and an appropriate method of data collection is preferred. From this, the two important questions arise (i) what are those methods required to obtain paramount data or sample and (ii) how best to use the data or sample to estimate the characteristic of the whole population i.e., what are those methods by which we can study our population parameters to draw a proper statistical inference.

1.1. Origin and distribution

• Originated in Asia namely North West India, Afghanistan, Tajikistan, Uzbekistan and Western Tien Shan
• According to Vavilov (1951), it was originated in Pakistan.
• Jones and Mann (1963) stated that areas comprising Pakistan, Iran and mountain areas to the North India are primary centres of origin
• India is the second largest producer in the world, next to China and ranks third in export of onions, next to Netherlands and Spain.
• Maharashtra is the leading onion producing state in India, followed by Karnataka and Gujarat.
• Grown in Odisha, Andhra Pradesh, Uttar Pradesh, Tamil Nadu, Rajasthan and Bihar

1.2. Onion types in India

• Common onion (Allium cepa var. cepa) - Large bulbs born singly and propagated through seeds. Used as salad or in curries.
• Multiplier onion or potato onion (Allium cepa var. aggregatum) -Producing small bulbs, borne in clusters and generally propagated through small bulbs. Used for seasoning curries.

1.3 Dextrose

Sweets which include dextrose have different eating qualities to those made with sucrose and glucose syrup alone. Recipes should be balanced so that the sucrose to dextrose ratio achieves the required product texture.

The incorporation of dextrose will increase the likelihood that crystallization will occur either on store or during manufacture. Replacement usage levels for dextrose normally lie between 5% and 15% of the Sucrose content

Potato (Solanum tuberosum L.)

Potato is the third most important food crop in the world after rice and wheat in terms of human consumption. Potatoes are an important staple food crop. Introduced into Europe in the 16th century by Spanish explorers, it is cultivated throughout the world including the Indo-Pakistan subcontinent.

Botanical Name : Solanum tuberosum L.

Family : Solanaceae

Importance

• Potato is an economical food, as it provides a source of low cost energy to human diet.
• For vegetable purposes, potato has now become one of the most popular crops in India and cultivated in almost all states and under very diverse agro climate conditions.
• Potatoes are a rich source of starch

Power transmission through belts, pullies, gears, speed and size

Both stationary and portable types of agricultural machines make use of various types of power transmitting devices for doing useful work.

Some of these power transmitting devices are meant to convert rotary motion into linear motion or oscillating motion.

This transmission of power from generating unit to useful unit is possible through belts, pullies, gears, cams and couplings are also employed to transmit power. eg. The self propelled combine is a machine which employs most of the above power transmitting devices.

In some machines the belt drive is used to transmit power between two parallel shafts placed a short distance apart. In others a sprocket and chain drive is preferred, when the two parallel shafts to be operated

Farming System Approach (FSA)

Farming systems refers deliberate raising of crops,forest and fruit trees, animals including fisheries, piggery and duck farming, sericulture, mushroom, on a given unit of land to increase the productivity and profitability, to upgrade natural resource base and to achieve overall improvement in the environment

The philosophy behind shifting from cropping system to the farming system mode involves

1. In situ recycling of organic residues including farm wastes generated at the farm to reduce the dependency on chemicals
2. Decrease in cost of cultivation through enhance input use efficiency,
3. Effective use of bye-products/wastes of one component for the benefit of other component/components
4. Upgrading of soil and water quality and bio-diversity,

Entrepreneurship means all the activities that a person has to do to start and run businesses in line with social, political and economic changes. Businesses include activities related to consumer likes and dislikes, feelings and behaviors, likes and dislikes and the introduction of business plans to meet all of consumer expectations. Entrepreneurship is seen as a ‘new product’ that will enable entrepreneurs to develop a new type of business organization and new business activities that address the changing needs of the community. 

Important Points to Remember

• Statistics is a branch of mathematics that deals with the data collection, examination, description, and display of numerical data masses.
• Statistics is used in various aspects of life, like in robotics, data science, business, weather forecasting, sports, and much more.
• An ambiguous term. It often denotes the arithmetic mean, but it can also denote the median, the mode, the geometric mean, and weighted means, among other things. Beware if something reports “the average” without making it clear which average.
• The geometric mean of n numbers {x1, x2, x3, …, xn} is the nth root of their product: (x1×x2×x3× … ×xn)^1/n.
• The samples are one of the sub-set of the population, whereas a population is an overall set of things or individuals of a specified group.

Animal breeding data is unique in terms of volume, statistical analysis, type of information required etc. The large volume of data extended spatially and temporally warrants additional tools in the form of databases to handle data and enable accuracy, retrieval, efficient utilization and adaptability to software. This chapter explains the nature of animal breeding data and the importance of databases with examples and explanations.

Animals are raised for some utility including meat, milk, hide, wool etc., and efforts are on to continuously improve the quality and quantity of these products. Some of the important economic traits in this regard were already discussed in earlier chapters. Record maintenance is primary for decision-making with respect to the selection of animals. The details of record maintenance including the format of registers are already explained in chapter 2. Apart from the actual information required for economic traits, pedigree information forms an important part of animal breeding data.

Correlations and regression are important components of animal breeding analysis. The genetic correlation is an important genetic parameter that is useful in the planning of breeding programs involving multiple traits. In this chapter, the basic concepts of correlation and regression including method of estimation, assumptions and test of significance are presented. An example using SPSS software is also given at the end for better understanding.

Estimation of variance is primary for any breeding program as all the genetic parameters are dependent on these estimates. The properties of an estimate, their assumptions, type of data, availability of data, and computational requirement make it important to understand the method of estimation of variance components so as to make a wise choice that would suit the breeder’s requirement. This chapter explains the methods of estimation of variance with merits and demerits of each and the reader could use these as a guide to choose the right method of estimation.

The genetic parameters are the basis for any animal breeding program and the important parameters such as heritability, repeatability and genetic correlation are ratios of (co)variances and their reliability depends on the accurate estimation of variance components. Estimates of variance components are used extensively in animal breeding.

Definitions of Energy

Energy is a key topic in science and technology, as well as in society in general. In terms of energy, a typical definition found in popular literature as well as textbooks is “energy is the ability to do work” or, much more precisely, “energy is the capacity of a system to do work” [Atkins 1990].

Energy is described as the ability to generate change or carry out work, and that work can be separated into numerous easily identifiable tasks: Energy produces light, heat, motion, sound, growth, power and technology etc.

Abstract

This chapter examines natural resource economics, a multidisciplinary field that studies how economic and ecological systems interact to allocate natural resources on Earth. These resources, which include both human and nonhuman factors of production, are essential for the provision of goods and services. The chapter also explores the challenges of valuing and managing natural resources without market prices, and the implications for the sustainability of the food supply.

Abstract

Enzyme is a highly efficient catalyst that is produced by active cells. When compared to chemical catalysts; enzymes have a number of benefits, including high specificity, high catalytic efficiency and flexible activity, all of which greatly help to promote their use in the pharmaceutical, chemical, and food sectors. The majority of enzymes such as protease, amylase, lipase and cellulase are relatively unstable and industrial uses are frequently restricted by a lack of long-term operational stability as well as the technically challenging recovery process and ruse of the enzyme. Enzyme immobilization provides an excellent base for increasing enzyme availability to the substrate with higher turnover over a long period of time. Enzyme immobilization are done by several methods and their performance are influenced by many factors. Physical and chemical based immobilization are the most commonly used methods. The matrix immobilizes the enzyme by holding it permanently or temporarily for a short stretch of time. The generally used matrixes for immobilizations includes natural, synthetic polymers and inorganic compounds.Currently, synergistic interactions of biotechnology and nanotechnology are useful for the development of immobilized enzymes. Enzyme immobilization is a commonly used technology in a variety of industries including food, pharmaceuticals, bioremediation, detergents, and textiles due to technical and economical advantages. This chapter focuses on most commonly used immobilized techniques in industry with many recent applications of immobilized enzymes.

Introduction

Pollination is a process in which pollen grains are transferred from male gametes to the female gamete, thereby enabling fertilization and reproduction through growth of the pollen tube and eventual release of sperm. Fertilization is the union of the egg and sperm. In plants, this may happen after pollination; however, pollination doesn’t always result in fertilization. Fertilization occurs when the pollen grains germinate on the stigma and grow in the style. Reproduction is the process to produce offspring by fusion of male and female gametes, which simply means that the sperms of the pollen unite with the ovules in the ovary of the flower and subsequently produce seed. Flowers may facilitate out-crossing (fusion of sperm and eggs from different individuals in a population) or allow selfing (fusion of sperm and egg from the same flower). Some flowers produce diasporas without fertilization (parthenocarpy).

7.1. What is Energy Conservation?

In order to protect resources for future use and to lessen environmental degradation, energy conservation refers to actions performed to limit energy use.

.2. What is Energy Efficiency?

The definition of energy efficiency is the use of less energy to carry out a task or achieve a goal. Homes, buildings, and manufacturing facilities that use less energy to manufacture things require less energy to heat, cool, and operate appliances and electronics.

3.1 Introduction
Irrigation efficiency evaluates how effectively the water has been distributed for the purpose of crop production. Water is conveyed to crop field through canal water courses and channels. During this process considerable amounts of water get lost through run off, deep percolation, evaporation, etc. The losses of water greatly depend on the skill of the irrigator, degree of land preparation, and design and planning of the system. The extent of water losses starting to diversion of water from its source to crop field though conveyance and ultimate application and distribution of water in crop field which can be estimated separately. The estimation of these efficiencies enables one to identify the step(s) where improvement is required. The method of measurement and evaluation for its efficiency is prerequisite for proper use of water. Irrigation efficiency in developing countries in general is poor particularly in gravity irrigation methods. However, water is become more and more scarce. Due to pressing need of it judicious and efficient management is one of the vital issues to be solved on priority basis.

Entrepreneurship plays a vital role in driving economic growth, and its significance in the agriculture and allied industry cannot be overlooked. As the backbone of many economies, agriculture and its allied sectors provide employment to a significant portion of the global population. In this chapter, we will delve into the concept and overview of entrepreneurship in the context of agriculture and allied industry, exploring its definition, nature, characteristics, and the need for entrepreneurial skills. We will also highlight the benefits of being an entrepreneur in this sector, discuss the different types of entrepreneurs, provide relevant statistics and case studies, and touch upon the factors affecting entrepreneurial behaviour. Additionally, we will examine the current trends and forecast for the next three years in the agricultural entrepreneurship landscape and examine relevant statistics and case studies and shed light on the government’s role in promoting entrepreneurship in the Indian startup ecosystem.

Blockchain technology has emerged as a revolutionary solution in various industries, and agriculture is no exception. By providing a secure and transparent system for recording and verifying transactions, blockchain has the potential to transform the agricultural sector. In this chapter, we will explore the role of blockchain in agriculture, its benefits, and various use cases that demonstrate its potential. Additionally, we will present key statistics and real- world examples to illustrate the impact of blockchain in agriculture.

Modern farming system was aimed to maximise crop production by use of high yielding crop varieties or hybrids and application of agro-chemicals like fertilisers and pesticides along with irrigation and better crop production technologies. But without consideration of its impact on the environment and economics of the farmers, the monoculture of rice and wheat with agro-chemicals caused land degradation, soil and water contamination, gene erosion and environmental pollution.

Natural resources are naturally occurring resources which can be exploited for economic gain. They include raw materials such as fuels, minerals and metals, soil, water, air, sunlight, land, biomass and ecosystems. Natural resources also include living (biotic) and non-living (abiotic) materials. Natural resources are gifts of nature for the humankind.

Aeration is the addition of oxygen or air containing oxygen to water. Any aquatic species important for commercial purpose requires oxygen. Even photosynthetic plants need oxygen when it is dark.

2.1 Need of aeration

Rise in atmospheric temperature causes increased rate of biological degradation of organic matters and subsequent depletion in dissolved O₂ concentration in water.

The parent material to which a coating or plating is applied is known as the base material. The phrase base material is used to distinguish the overall part, numerous layers, and the original base material. Coating, electroplating, welding, and soldering all depend heavily on base materials.

Integrated farming places a strong emphasis on the fundamental functions of agro-ecosystems, balanced nutrient cycles that are adapted to the demands of the crops, the health and wellbeing of the farm’s livestock, and a holistic management strategy that sees the entire farm as one connected system (Kochewad et al. 2017). Family farming, often referred to as integrated farming, provides the opportunity to profitably utilize the farm family’s available labor to the fullest extent throughout the year, leading to an increase in income and family contentment.

Electricity is one of the fundamental phenomena of nature. Electricity or electric current is caused due to the movement of charged particles i.e., electrons. Due to the potential difference between two points in a conductor, electron movement takes place. The potential difference between two points is caused due to the difference in charge density. Electron tends to flow from lower potential to higher potential which causes electricity to flow. In general, the electrons flow from cathode (negative) to anode (positive) but in a wire electricity, electrons flow from anode to cathode when connected to a battery or any electricity source.

Enzymes (biological catalyst) can be defined as a substance which initiates or fastens the reaction rate, without being consumed during the reaction. Enzymes function as a catalyst in various biological processes taking place in all life forms. Although enzyme synthesis takes place inside living cells, they can even function as a catalyst in the in vitro processes, which makes it suitable for many industrial applications. For product formation in any chemical reaction, reactants or substrates has to overcome the transition state.

The two limbs of Arabian Sea and Bay of Bengal form parts of North Indian Ocean (NIO) on the left and right respectively. Though the Arabian Sea and the Bay of Bengal are located in the same latitudinal belt and receive the same amount of solar radiation, oceanographically these two basins exhibit remarkable differences. The reason for it is Bay of Bengal is shallow and less saline due to heavy river water discharge and Arabian Sea is deep and cold and more saline.

The general distribution of density in the oceans is like a two layer ocean as shown in Fig.5.1 below. A layer of more or less uniform density (nearly vertical) near the surface called as isopycnal layer and a deeper layer of higher density below with sharp increase of density is called as pycnocline.

The following scientists greatly contributed to the wind driven circulation. Out of all Ekman, Sverdrup, Stommel and Munk are most important and ever remembered for their work. So in the following pages discussion is mostly concentrated on these four scientists theories.

Worldwide, various biopesticides have been created and are in use, including viruses, microorganisms (bacteria, fungi, etc.), microorganism derived products, animal derived goods (pheromones, hormones, insect-specific toxins, etc.), plant derived products, and genetically modified organisms (Nicholson 2007; Erlandson 2008; Mazhabi et al. 2011; Islam and Omar 2012).