eChapters

1.    Biological Control of Insect Pests
    
2.    Biocontrol Agents in Vegetables
    
3.    Mass Multiplication of Predators and Parasites
    
4.    Microbial Control
    
5.    Transgenic Plants
    
6.    Biological Control of Diseases
    
7.    Conclusion
        
References

INTRODUCTION

The climate of India is favourable for production of a variety of tropical, subtropical and temperate fruits. The area under cultivation, production and productivity of fruit crops has increased significantly during the last fifteen years. Horticulture has emerged as major area of growth in the agricultural sector and has out performed other crops with respect to production and productivity. The increase in fruit production was improved considerably from 43.0 million tonnes in 2001-02 to 91.4 million tonnes in 2015-16 (Table 1). This increase in production has come from an increase in area under different fruit crops and overall increase in productivity. In this way, India has maintained its second rank in global production of fruits next only to China. The fruit area increased from 4 million hectares in 2001-02 to 6.4 million hectares in 2015-16. On the basis of fruit production, it is estimated that per capita fruits availability in India 190 g per day which is still less than the recommended quantity of 230 g per capita per day.

7.1. INTRODUCTION

The cultivation of wheat (Triticum spp.) reaches far back into history. Wheat was one of the first domesticated food crops and for 8000 years has been the basic staple food of the major civilizations of Europe, West Asia and North Africa. Today, wheat is grown on more land area than any other commercial crop and continues to be the most important food grain source for humans. Its production leads all crops, including rice, maize and potatoes.

Wheat is special in several ways. It is grown on more than 240 million ha, larger than for any other crop, and world trade is greater than for all other crops combined. The raised bread loaf is possible because the wheat kernel contains gluten, an elastic form of protein that traps minute bubbles of carbon dioxide when fermentation occurs in leavened dough, causing the dough to rise (Hanson et al., 1982). It is the best of the cereal foods and provides more nourishment for humans than any other food source. Wheat is a major diet component because of the wheat plant’s agronomic adaptability, ease of grain storage and ease of converting grain into flour for making edible, palatable, interesting and satisfying foods.

Introduction

Globally, now scholars accepted that the climate is changing and it has implications on human culture, social systems, economic stress and ecological problems (Ford et al. 2010). The IPCC advocates to search and develop local solutions for climate change adaptations (IPCC 1996; IPCC, 2001), however, it does not recognize the breadth and strength of centuries-tested community knowledge/traditional knowledge systems (Salick et al. 2009) which are available with the people of developing world, and has been for adaptation practices and strategies to extreme weather and climate change (Turner and Clifton 2009; Salick and Ross 2009). It is well recognized that with fragile ecosystems, poor economic status and with less robust technologies required to adapt climate change, marginal and poor people of developing countries are likely to be more vulnerable with the changing climate than the industrialized countries (Tompkin and Adger 2004; Agrawal, 2008).

Effect on SOC and N losses through runoff and soil erosion

With increase in population, agriculture is being extended to even marginal soils which were hitherto uncultivated. Such soils are more seriously prone to erosion losses (FAO 2008), mostly because of their topographical position. Overall, soil organic matter and nutrient rich surface soil erosion could become more serious threat in the wake of changing climate in future; therefore, it is necessary to find suitable remedy measures to sustainable food production while protecting the soil from erosion.

Introduction

Human civilization used to undergo several form of disasters throughout its life history. Most of such events are unpredictable, sudden and short in duration, and such events can easily classifiable as either natural (e.g. cyclones, earth quake, natural forest fires and tsunami) or manmade such as spread of toxic chemicals (e.g. Bhopal disaster 1984), nuclear explosions, civil war, diseases (Minamata, itaiitai, etc.). However, climate change is a real time prolonged disaster which is caused by both natural (caused by variation in solar irradiance, variations in orbital parameters of earth, volcanic activities, natural forest fire, methane release from thawing of permafrost from ocean floor, natural wetlands and cattle) and anthropogenic means (by greenhouse gases resulted from human activities-all kinds of combustion, industrial production of greenhouse gases and agricultural water lodging activities such as paddy cultivation and artificial wet lands, and deforestation).

The greenhouse effect is thought to be due to the absorption of solar infrared (IR) radiation by gases and the earth’s surfaces, which, as a result, is heated and then reemit IR radiation at low frequency with a high absorptive power. In fact greenhouse gases in the atmosphere are essential for maintaining life on earth, as without them the planet would be permanently frozen because all of the incoming heat from the sun would be radiated back into space by the earth’s surface (Moss, 1993). The threshold concentration of these gases at which their greenhouse effect would be minimized is not known, but it is accepted that their concentrations in the atmosphere should not be allowed to continue to rise. In recent years, there has been an increase in public concern over environmental damage originating from animal feeding operations.

Introduction

Earth was a beautiful landscape but man has ruthlessly exploited for his greed specially, in the last century. With rapid industrialization and random urbanization environmental pollution has become a serious problem. Over exploitation of open spaces, ever-increasing number of automobiles and demographic pressure has further aggravated the problem.
 
According to The Hindu, on December 1, 2015 a blanket of smog surrounded Beijing, China, later this smog covered one tenth of China’s area. This situation was recently seen in Delhi, after diwali. It was reported that suspended particulate matter (SPM) content in the air was 14-16 times higher than the permissible limits. So, one of the ways to mitigate this pollution is plating of trees and shrubs as green corridors for abatement of pollution and improvement of environment is an effective way.

24. IGNEOUS ROCKS

Introduction : Petros = rocks and logos = science

Petrology means the science of rocks. It deals with the mode of occurrence composition, classification and origin of rocks and their relation to geological processes and history of the earth.

Rocks can be studies in two ways : The study of rocks as specimens in the laboratory is called Petrography which places emphasis on the purely descriptive part from textural mineralogical and chemical point of view. Petrogenesis deals with the origin and processes of formation of rocks. Petrology is a broader term which includes both petrography and petrogenesis.

Igneous rocks are formed by cooling and solidification of magma, either underneath the earth’s surface or above the earth’s surface.

Origin and Domestication of Goat

Goat is a cloven-hoofed, hollow-horned ruminant which is comparatively smaller in size and belongs to class Mammalia, order Artiodactyla, family Bovidae and genus either Capra (2N=60) or Hemitragus/tahrs (2N=48). The distinction between these two genera was previously based on horn structure but the distinction has been confirmed genetically. The domestic goat (Capra hircus/Capra aegagrus hircus) belongs to the genus Capra and has possibly developed from five wild ancestors. On the basis of available information, it is most likely that bezoar is the main ancestor of most domestic goats. However, there is slight likelihood that Markhor has been involved in the parentage of some of the Indian goat breeds.

Evolutionary biology indicates that domestication of goats started during Neolithic age and it was perhaps the first ruminant and first animal after dog to be domesticated by the man around 9000-7000 BC. Domestication was associated with three of the oldest civilizations namely- (i) the Nile in northeast Africa, (ii) the Tigris-Euphrates in west Asia, and (iii) the Indus in the Indian subcontinent. Archaeologists indicate that the goat was first domesticated in the “Fertile Crescent” (landmass which extends between the Black and Caspian seas along the coast of Palestine and forms arc like a quarter moon towards the Persian Gulf) of the eastern Mediterranean. Since their domestication, goats remained associated with variety of functions in various aspects of human life including food, employment, economics, folklore and religion.

1.    In milk and milk products, non bacterial ropiness or sliminess may be due to the stringiness/sliminess caused/resulted

(a) Due to thin film formation of proteins, when cooled

(b) From cream thickness

(c) By mastitis, fibrin and leucocytes from the milch animal’s blood

(d) All of the above

2.    In milk, bacterial ropiness is caused by slimy capsular material from the cells usually

(a) Lipids

(b) Proteins

(c) Gums or mucins

(d) Polysaccharides

10.1 Introduction

Edible oil production is a separate sector of the food processing industry. There are several species of plants in the world whose oil can be utilized for human consumption for edible and non-edible uses. Though around 40 oilseeds are known, only around a dozen oilseed crops have become commercially important including ten seed crops and three tree crops. These oil seed crops (mostly annual) of commercial importance are groundnut, rapeseed-mustard, sesame, soybean, sunflower, cottonseed, safflower, niger, castor and linseed. The three major tree oil crops are palm, olive and coconut [63]. Besides these, the kernels of some other tree crops i.e. apricot, almond, walnut, hazelnut, olive (fruits are used), peach, can also be utilized for oil extraction purposes for edible and non-edible uses. Besides oil of the oilseed crops, the oils of tree fruits and kernels are also becoming popular very fast for various food, pharmaceutical and cosmetic industries.

Large scale requirement and local shortages of oils for various edible and non-edible uses have prompted the identification of many new sources of oil during the last few decades. They are ricebran, corn, sal, mahua, jatropha, kokum, melia, rubber, mango kernel, kusum, simarouba, neem, karanj, crambe, moringa, tumba, jojoba and tobacco seed etc. Most of these oilseeds and their products have wide utility in the specialty oils sector and are mostly used for non-edible purposes. Soaps and detergents, paint and varnish, lubricants, pesticides and medicines, cosmetics, bio-diesel fuel industry are the major consumers of these non-traditional oilseeds. All the oil crops will gain greater attention in future as they are renewable and biodegradable in nature [63]. List of oil crops have been given in Table 1.

Key words : Remote Sensing, Ecosystem, Environmental Pollution, Biodiversity Conservation, Coastal Environmental Degradation, Wetland.

Introduction

National prosperity and human resources development are primarily shaped by the availability of natural resources and their use. None the less, the benefits are quite often negated by the resultant environmental degradation concomitant with their utilisation for economic values. The problems of environmental degradation have assumed critical dimensions in many parts of India due to resources exploitation; industrialisation and urbanisation, unchecked population growth and a never ending quest for energy to meet the increasing demands. Moreover, improper utilisation of resources has resulted in such environmental problems as soil erosion, waterlogging, floods, droughts and pollution of various types besides socio-economic disparity among people.

After the 1972 Stockholm conference on Human Environment and Development, there has been a phenomenal increase in the worldwide interest in the environmental issues associated with development. Consequently, the focus of development has shifted to environment friendly and sustainable developmental planning in recent years. The Rio Summit (June 3-14, 1992) further emphasised the fact that earth is an integral and interdependent system, which require sustainable developmental planning. During deliberations of the Rio Summit (Earth Summit), it was emphasised that satellite imagery will be quite helpful in monitoring earth’s environment.

India has a long tradition of environmental protection and has enacted laws during the last three decades to give further impetus to the conservation of natural resources and protection of environment. Some of the important laws are:

The remains of animals and plants of past ages preserved in the rocks are known as fossils, the study of which forms the subject of Palaeontology. The conditions for an animal or plant to become a fossil are firstly it must possess skeleton of some kind or some hard parts, since the soft parts are decomposed rapidly, secondly the organism must be covered up by sedimentary layer, otherwise it will soon crumble to pieces.

5.1 Modes of Preservation of Fossils

The conditions in which fossils occur depends, on their original composition and on the material in which they are embedded. The chief types are as follow:

5.1.1 The entire organism preserved

Occasionally the soft parts of the organism are preserved as well as the skeleton, the whole having suffered very little change. Instances of this are the woolly rhinoceros and mammoth found frozen in the mud and ice in Northern Siberia. Insects encased in fossil resin, known as amber, are found in the Oligocene beds in the Baltic shores of Persia, but the soft part of organisms are rarely preserved.

5.1.2 The skeleton preserved almost unchanged

Sometimes where the skeleton alone is preserved, it remains almost in its original condition, except that it has lost its organic matter. Thus the shells in the Pliocene beds of England differ from living ones only in being lighter, more porous and generally colourless. In some instances a certain amount of mineral matter, such as carbonate of lime, has been added to the skeleton, making it heavier and more compact.

General Effect of Mutation

Gene mutations are molecular changes in the DNA sequence of a gene

Gene mutations can alter the coding sequence within a gene

Gene mutations are also given names that describe how they affect the wild-type genotype and phenotype

Gene mutations can occur outside of the coding sequence and still influence gene expression

DNA sequences known as trinucleotide repeats may cause mutation

Changes in chromosome structure can affect the expression of a gene

Mutations can occur in germ line or somatic cells

Tomato

Tomato, a warm season vegetable, requires a long season to produce a profitable crop. The optimum range of temperature for its cultivation should be 21–24ºC. The mean temperatures below 16ºC and above 27ºC are not desirable. The minimum, optimum and maximum soil temperatures for seed germination are 10º, 30º and 35ºC, respectively. Maximum seed germination occurs at 24ºC. Maximum fruit setting occurs at night temperature of 15-20ºC. Flowers fail to set fruit below 13ºC and beyond 38ºC. Formation of red colour due to lycopene is inhibited when temperature exceeds 32ºC. Lycopene is highest at 21-24ºC, while its production drops off rapidly above 27ºC. Tomato plants are highly susceptible to high rainfall areas if proper drainage is not available.

It is grown in many types of soil from sandy to heavy clay. A well-drained fairly fertile loam soil with a fair moisture-holding capacity is ideal for growing its good crop. It prefers a soil having a pH of 6.0 - 7.0. Application of liming is beneficial if it is cultivated in acid soils.

It can be grown almost round the year. The planting seasons vary from place to place. In northern India, for spring summer crop, it is sown in November and transplanted in second fortnight of January. In area, where frost does occur, it is sown in July-August and transplanted in August-September. In hilly areas, it is sown in March-April and transplanted in April-May.

1. INTRODUCTION

There are many countries surrounded by the waters of the Caribbean Sea. These countries vary widely in size, topography, ethnicity, language spoken, agricultural production systems, main sources of income, income levels and styles of governance, to name a few.

This analysis covers only the countries where English is spoken as the first language. These countries are linked through a grouping of Caribbean Communities, called CARICOM, an organization of 15 Caribbean nations and their dependencies. It starts with Jamaica in the North to Trinidad and Tobago in the South, but also includes Belize in Central America and Guyana and Suriname in South America. Although French speaking Haiti and Dutch speaking Suriname belong to CARICOM, they are not discussed because of the language barrier. The other French speaking islands (Guadeloupe and Martinique) and the Spanish speaking islands (mainly the Dominican Republic, Cuba and Puerto Rico) have different administrations for agricultural development. CARICOM countries stretching from the tip of Florida, USA, in the North to Venezuela in South America. CARICOM includes Belize in Central America and Guyana and Suriname in South America.

1. INTRODUCTION

In the past, conventional ICTs that have been applied to agricultural extension services include the use of television, radio, etc., and these media have been criticized as archetypical, passive, top-down in nature; hence they have not created meaningful impact on agricultural information delivery (Akpabio, 2007). As a result of this, extension roles have undergone several transformation, over the years. One of the objectives of agricultural extension is to create conducive platform for empowerment so that food security can be guaranteed. In order to guarantee food security there is need to utilize faster and more efficient techniques of project identification, selection, implementation and evaluation in the agricultural extension process (Braimoh and Oladele, 2000). The inadequacies of interpersonal communication strategy in development gave credence to the use of media support in development process (Yahaya, 2000). In recent times, further improvements have been made on the use of media support through digital media. This is what makes contemporary ICT more relevant.

Modern ICTs emerged in Nigeria at a time when there was need for change in the agricultural extension delivery system to suit the contemporary situation. The conventional forms of communication used by extension agents include written (bulletin, leaflets, newspapers, articles, personal letters, circular, etc.); spoken (general meeting, special meeting, farm and home visit, official calls, telephone calls and radio); visual (result demonstration, exhibits, posters, motion pictures, charts, slide) and spoken/visual (method demonstration meeting, result demonstration meeting, meeting involving motion pictures, meeting involving charts).Torimiro et al.,(2000) noted the non-usage of telephone calls in extension work, giving reasons as preference for the locally accessible and affordable forms of communication they can employ.

1. The goal of —————— is to gather commodity from the field at proper stage of maturity With minimum damage.

   a) Harvesting

   b) Grading

   c) Sorting

   d) Handling

2. Harvesting in rose is done at —————— stage

   a) Loose bud

   b) Tight bud

   c) Fully open

   d) Partially open

Manure is the organic material derived from animal, human and plant residues which contain plant nutrients in complex forms. Manures are used as source of plant nutrients. They release nutrient after their decomposition. They are applied in large quantities

Advantages of Organic Manures

• Organic manure provides all the nutrients that are required by plants but in limited quantities.
• It helps in maintaining C:N ratio in the soil and also increases the fertility and productivity of the soil.
• It improves the physical, chemical and biological properties of the soil.
• It improves both the structure and texture of the soils.
• It increases the water holding capacity of the soil.
• Due to increase in the biological activity, the nutrients that are in the lower depths are also made available to the plants through manures.
• It acts as mulch, thereby minimizing the evaporation losses of moisture from the soil.

1.1 Importance of Food Process Engineering

Food occupies the first position among the hierarchal needs of human beings. It is more important than shelter and clothing. After production and be forec on sumpti on, food commodities are subjected to nume rous unfavourable physical, chemical, microbial or parasitic factors which may cause their spoilage or disease when consumed. To prevent such spoilage, a process engineer has to understand these and provide remedial measures. The two primary goals of processing operation are first to minimize post harvest losses and second value addition of raw food commodities through preservation and processing.

Present level of production of different types of food commodities and their estimated post-harvest losses along with monetary values are given in Table 1.1. It shows that various food items get lost, to the tune of 65 million tonnes, worth Rs. 76,000 crores per annum, during post-harvest phase. A substantial amount of these losses could be prevented if appropriate agro processing centers, having backward linkage with farmers to ensure constant supply of quality raw food materials, are established and operated. Profit generated through value addition must also be shared with farmers, who are only people in the world to create wealth every year, in the form of food, fiber and other commodities necessary for human survival. It can bring sea change in rural areas, where 65-70% population live, in respect of economy, health and happiness.

It sounds simple, but the above process is fairly complex and requires lot of coordination in order to succeed. The major challenge is to minimize the losses during the various post harvest operations and keep the food as fresh as possible. In order to do so, one must first try to understand the various causes of post harvest losses of food commodities and the various factors that influence theses causes. Secondly, we must use those food processing operations that will not only extend the shelf life of the produce but also convert the raw food commodities to more acceptable product to the consumer.

3.1 Introduction

The subject of heat transfer is firmly grounded in the sciences of thermodynamics and fluid mechanics. It has become exceedingly important for engineers to possess a clear understanding of the principles of heat transfer and its application to a large number of problems. In view of process engineering, the knowledge of heat transfer and its application is most important, because heat transfer is one of the basic unit operations in the agricultural processing activities. The design of process equipments, refrigerators, boilers or type of heat exchangers, thermal treatment of food grains, cooling of perishables, pasteurizations, sterilizations, freezing of milk and fruit juices and a large number of similar applications involve consideration of heat transfer rates. There may be other situations where heat is being generated during a certain operation, and may be detrimental to the equipment and the food product. In such cases we are often faced with the task of removing the undesirable amount of heat as far as possible.

The vulnerability of agriculture to climate change has become an important issue resulting in reduced productivity due to adverse climatic changes. The overall purpose is to assess farming systems change to enable adaptation to climate change. It deals with the predicted climate change scenarios and the adaptations necessary to reduce climate change impacts and examines improvement of indigenous breeds for adaptation to climate change. It also explores the use of crop modeling as avenues to address adaptations of crop production systems and draws the recommendations to outlines of future research needs.

Although the adverse effects of climate change are likely to be borne disproportionately by the small farmers of the developing world, it is the integrated farming systems with their high degree of biodiversity which are best equipped to withstand the shocks of climatic extremes. Apart from the landless and urban poor, small farmers are among the most disadvantaged and vulnerable groups in the developing world. It is obvious that climate-related environmental stresses are likely to affect individual households differently compared to more market-oriented farmers. The climate change reduces crop yields. The effects on the welfare of subsistence farming families may be quite severe, especially if the subsistence component of productivity is reduced. Changes in quality and quantity of production may affect the labour productivity of the farmer and negatively influence his/her family health(Rosenzweig and Hillel 1998).

Government Programmes for Agribusiness

Both the central and state governments have devised programmes to luve the entrepreneurs for setting up agribusiness in India. They may be classified as programmes falling under small-scale industries, Khadi and village industries, small and medium industries, large industries based on the finance required for investment. Apart from these many efforts were taken especially after signing, the WTO agreement to harness the export market. They include conversion of Export Processing Zones (EPZ) into Special Economic Zones (SEZ), establishment of Agri-export zones for which government is attracting private investors to make investment in infrastructure development of cold storage chains, improvement in road, rail, sea and air transport systems.

The Ministry of Small Scale Industries & Agro and Rural Industries designs and implements the policies through its field organizations for promotion and growth of small and tiny enterprises, including the coir industries.

The Ministry also coordinates with other Ministries/ Departments on behalf the Small Scale Industries (SSI) sector.

The implementation of policies and various programmes/schemes for providing infrastructure and support services to small enterprises is undertaken through its attached office, namely the Small Industry Development Organization (SIDO), statutory bodies/other organizations likely Khadi and Village Industries Commission (KVIC) & Coir Board a Public Sector Undertaking -National Small Industries Corporation (NSIC) and three training institutes -National Institute of Small Industry Extension Training (NISIET), Hyderabad, National Institute for Entrepreneurship and Small Business Development (NIESBUD), New Delhi and Indian Institute of Entrepreneurship (IIE), Guwahati.

Introduction

Organic agriculture implies growing of agricultural crops and animal husbandry components while not chemical plant food, weed killer and pesticides used. An agricultural practice followed in organic farming squarely measure ruled by the principles of ecology and squarely measure amongst the ecological means that.

Organic agriculture could be a production system that avoids or mostly excludes the employment of synthetically combined fertilizers, pesticides, growth regulators, placental feed habit-forming and genetically changed organisms. Organic farmers admit crop rotation, inexperienced manures, compost, biological blighter management, and mechanical cultivation to keep up soil productivity and management pests as way as doable and practicable. Organic agriculture could be a distinctive production management system and key issue of maintenance of agricultural property that promotes and enhances agro-ecosystem health, together with multifariousness, biological cycles and soil biological activity, and this is often accomplished by victimization on-farm science, biological and mechanical ways in exclusion of all artificial off-farm inputs during this context, a serious thrust towards organic cultivation, however, would require variety of alternative initiatives and infrastructural support. Active involvement in learning crops and their diseases, development of organic manure, natural pesticides, coaching of farmers, and provision of storage and property square measure all vital areas to appear into.

Organic farming has become progressively vital in agriculture given the rising variety of issues that use of chemical fertilizers and pesticides squarely measure throwing up GM (genetically modified) crops could give a wonderful yield however their long-run effects square measure hitherto untested and other people aren’t quite able to trust these foods excepting for this, there has been a big rise within the demand for organic food across the globe. Promoting these organic-farming techniques solely leaves India best poised to take advantage on the export potential of those foods.

Poor quality of water is one of the important factors causes gradual accumulation of salts on the ground or in the root zone of crops leads to saline and alkaline condition. This results in loss of permeability, toxicity and anaerobic conditions. In salt affected soils plants face constraint to derive their nutrients at the required rate due to high soil moisture tension, which affects adversely the crop growth and productivity.

4.1 Introduction

The purpose of processing the food is to make it safe and healthy for human consumption. The term food processing refers technologically anything, which transforms raw ingredients into consumer ready products, with the aim of stabilizing food products by preventing or reducing deteriorative changes in quality. The objective of food manufacturers is to develop, modify and employ those processing technologies that retain or create desirable sensory qualities in food and eliminate or reduce undesirable changes due to processing.

The purpose of food processing is to increase the shelf life of food before spoiling (preservation); to remove, destroy or inhibit pathogens and toxins (food safety); to change flavor, texture, aroma, color or form (variety); to reduce preparation times and make food more portable (convenience); to restore and/or raise nutrient levels in food (nutrition).The various food processing methods used extensively in food industry include physical (high temperature, freezing, chilling, dehydration, packaging), chemical (control of storage gases, reduction of water activity, pH, addition of chemical additives or spices) preservation methods.

Traditionally, food preservation has been associated with thermal treatments alone or in combination with biochemical or chemical methods. For example, the thermal processing of milk is done various thermal treatments viz. at 63^oC for 30 min for low temperature long time (LTLT), 72^oC for 15 seconds for high temperature short time (HTST) pasteurisations and up to 140^oC for a few seconds for ultra high temperature (UHT) treatment. However, such thermal treatments effectively reduce level of microorganisms but in long-term preservation, it may lead to losses of desired organoleptic attributes and destruction of temperature liable nutrients and vitamins. The limitations involved with thermal processing has been overcome by employing chemical preservation, cool chain management and process hygiene in the formulation and production of food products.

19.1 Introduction

Food safety is one of the important factor for food industry, regulatory agencies and consumers. Nowadays consumers are demanding food which is safe and of high quality in terms of nutrition due to a healthier life style. Food safety refers to all those hazards, that make food injurious to the health of the consumer and it is not negotiable. Food may be contaminated physically, chemically or microbiologically, mainly microbial contamination is of high concern in the food industries. Various pathogenic and spoilage causing microorganisms, viruses, insects can deteriorate the food products and cause food borne illnesses. Therefore, there is a need to eliminate these undesirable microorganisms from the food industries to ensure food safety to the consumer. Various methods are available to eliminate these undesirable microorganisms such as thermal technologies like pasteurization, dehydration, retort processing, freezing etc. and non thermal technologies like microwave heating, Pulsed Electric Field (PEF), High Pressure Processing (HPP), Pulsed Light Technology, Ohmic Heating, Ultra sonics, Pulsed X-Rays. But these technologies have certain disadvantages like thermal technologies lowers the nutritional value and leads to unwanted changes in the foods' sensory attributes of the food products whereas non thermal technologies retain better nutritional and sensory quality of food than thermal technologies but they are cost effective, required specialised equipments and trained personnel. Cold plasma technology (CPT) is a non-thermal green technology used now-a-days for variety of application in various industries especially in food industry. It is proposed to be an alternative method for eliminating microorganism from the fresh produce. This technology does not require extreme process conditions and can be used as a good alternative source for food preservation without affecting its nutritional and sensory attributes. Plasma is an ionized gas, consisting of active species like positively and negatively charged ions, electrons, free radicals, and gas atoms, metastable and quanta of electromagnetic radiation (photons). When the energy source is turned off, active species used to disappear immediately, therefore cold plasma technology is environmental friendly and fulfilling all ecological standards. Based on the properties of plasma, it can be applied in various fields like electronics, life sciences, textile, packaging and food industries. In food industries, it is showing promising application by retaining the nutritional, functional, and sensory characteristics thus ensuring the fresh appearance of the food product and satisfying the consumer need.

The state of Jammu and Kashmir is highly mountainous except for a short belt joining the Punjab plains. Geographically, the state of Jammu and Kashmir is divided into three regions -alpine desert of Ladakh, subtropical region of Jammu and predominantly temperate region of Kashmir valley. The valley is rich in herbaceous flora with huge potential for landscape use, however, many of which are still not exploited much for the purpose. Plants which live and bloom year after year are known as perennials which have an importance of their own and are backbone of any well-planned garden. The stems of herbaceous perennials die at the ground level each winter. They comprise a vast group of plants widely differing in size, leaf texture, flower color and are found in all the gardening countries of the world. The monotonous spread of concrete and glass in cities can have a dehumanizing effect. Growing colourful flowers in the house compound and in the parks will greatly enhance the beauty of surroundings in the countryside, the towns and cities. Flowers also bring happiness to life and boast the sagging spirits. The assemblage and display of colourful and attractive herbaceous perennials can achieve very significant and telling effects on the environment particularly in the landscaping of the house compounds, gardens, parks, health resorts and hotels. Now a day herbaceous plants are also used therapeutically to cure several problems related to humans. Judicious selection of native and introduced herbaceous perennials should camouflage with the type of habitation, building pattern, colour of the countryside etc. These plants should occupy only well thought of position in the landscape. There are always a number of shady spots in our lawns/gardens especially towards north-east side of a structure where lawn grass fails to grow or show poor growth. These spots can be converted into perennial herbaceous border of foliage plants.

Trees and shrubs are often the most dominant plants in landscapes but ground covers and vines play an important role too. The low spreading form of ground covers can connect and unify major planting areas and even serve as a focal point when the plants are flowering. In contrast to annuals, perennials provide savings in time, labour and expenses each year because where adapted to a specific climate zone, they can successfully over come winter and re- establish for more than a single growing season. Perennials are probably the most diverse plant group, providing a huge variety of shape, form, colour, texture and scent with which to design a planting. Since there is an increasing trend and awareness of planned landscaping in the public and in view of its value in preserving the environment, there is an urgent need to identify and select the appropriate native, naturalized and exotic planting material for specific sites /locations. Information regarding herbaceous perennials surveyed and identified in Kashmir Valley with prospective use in landscaping are given as under:

Meat processing is the set of methods and techniques used to bring substantial chemical and physical changes in the natural state of meat. These are the methods which are used for making meat and their products attractive, nutritious and marketable as well as for the prolongation of shelf-life. In processing techniques, grinding, chopping, addition of seasoning, alteration techniques for colour, heat treatments etc. are included but cutting, trimming and deboning are not included in processing operations.

History

Meat processing dates back to the prehistoric ages and probably the first processed meat product was sundried meat. Lator it turns to burning of meat over wood fire while salting and smoking of meat was practiced first time in the time of Homer, 850 B.C. In 63B.C.-14 A.D. at the reign of Augustus honey was tried for preservation of meat. Lator various types of cooking such as roasting, smoking, steaming and oven baking came in existance. Salt-preservation was especially common for foods including meat and meat products for warrior and sailor’s diets, until the introduction of canning methods.

Modern food processing technology in the 19th and 20th century was largely developed to serve military needs. In 1809 Nicolus Appert invented a vacuum bottling technique that would supply food for French troops and this contributed to the development of tinning and then canning by Peter Durand in 1810. Although initially expensive and somewhat hazardous due to the lead used in cans. Canned goods would later become a staple around the world. Pasturization discovered by Louis Pasteur in 1862 was a significant advance in ensuring the micro-biological safety of food. In 20^th century, food processing advances with the development of spray drying, freeze drying and the introduction of artificial sweeteners, colouring agents and preservatives such as sodium benzoate. In late 20^th century ready to eat meat food products were introduced to cater the need of consumers.

Abstract: Lilium is one of the six major genera of flower bulbs produced worldwide. Species are native to diverse habitat within Northern hemisphere. Liliums have a lengthy association with various world cultures. As a result, flower breeders have created numerous genotypes during the millennia of breeding this crop which has enabled its establishment in the top ten cuts, potted flowering and garden crops worldwide. The crop arises from multiple species. Research has focused on development of late flowering genotypes with forcing ability, improvement of flower form/ shape, pollenless cultivars, disease resistance and floral longevity. The limited genetic information and trait heritability have been established for this crop. Wide crosses are routinely used to create new genetic variability. Breeders have created complex hybrids such as LA, OT, OTO, FA, FAA, FO and OA hybrids through in vitro embryo rescue techniques. Molecular biology is being used to engineer Lilium against LSV and TBV. Crop ideotypes prescribe numerous traits for incorporation by flower breeders and geneticists including short forcing time, late flowering in Asiatic lilies, enhanced shelf life, genetically controlled height, rapid propagation and cultivars requiring no vernalization for flowering.

Abstract: Petunias, popular bedding plants, with variety of forms, sizes and shapes are employed for landscape planning, garden designs and container gardening. The numerous phenotypes viz., Grandifloras, Multifloras, Millifloras, Waves, Hedgifloras, etc. are complex hybrids. The outstanding marketable series of P. x hybrida have been developed for upright, spreading and semi-trailing to trailing habits. The leaf colour ranges from light to dark green and also variegated types. Flower colours with charming shades and patterns, picotte, star and pronounced venation of darker colours are available on world market. Petunias are strictly cross pollinated and progeny can segregate widely for traits due to heterozygosity. Increasing knowledge of the inheritance of traits and molecular genetics techniques are valuable tools aiding modern breeders. Numerous genes have been identified in the genus with some sequenced genes being used to create transformants with modified plant morphology, floral structure development, floral scent, and flower shelf life. Genes involved in the flavonoid biosynthesis pathway has enabled precision in the creation of flower colours or modification of pigment production and expression. An exploitation of sterility and incompatibility for production of F₁ hybrid seeds is discusses in detail.

Introduction

Food grains have been the key component of the human diet for thousands of years and have played a vital role in framing human civilization. Rice, wheat, and maize, and to a lesser extent, coarse grains are major staples, crucial to the daily endurance of billions of people around the world. Cereal grains are consumed by more than 50% of world population to meet daily calorie requirements. Most grains undergo a milling process that ideally removes the outer bran (pericarp) and germ layers; catering to consumer market requirements. To a farmer, yield is the most prominent aspect. As the grain moves along the supply chain, and as the product reaches the market, quality becomes the key determinant of its sale-ability and economic value. Grain quality is defined by a range of physical and compositional properties where threshold necessities are set according to end consumer use requirements. Most industries and consumer markets have become habituated over the years to demand grain with specific attributes. Where consumers are close to the source of grain production (e.g. in local markets), their own preferences and the laws of supply and demand control the grain quality. However, where grain is traded over large distances, particularly internationally, consumers almost have no direct influence on quality, requiring regulatory standards to be established and imposed to protect consumer rights. Therefore in the grain supply chain, all points have effects with respect to grain quality.

Introduction

Farm mechanization is application of machine power to work on land, usually performed by animate and mechanical power. It is also defined as an economic application of engineering technology to increase the labour efficiency and productivity. However, it not only includes production, distribution and utilization of a variety of tools, machinery and equipment but also planting, harvesting and primary process. Mechanization has a major impact on demand and supply of farm labour, agricultural profitability and a change in rural dynamics.

ABSTRACT

Advances in biotechnology, particularly methods for culturing plant cells and tissues can provide new means for the commercial processing of even rare plants and th chemicals they produce. These new technologies will extend and enhance the usefulness of plants as renewable resources of valuable chemicals. Aristolochic acid is mainly found in the genus Aristolochia. Aristolochic acid has been shown to hav anti-tumour activity and has been recommended for its activity against various effect of snakebite and its capacity to inhibit phospholipase A2 or other enzymes Considering the importance of medicinal use of A. bracteolata and A. indica, in th present study, they were selected for in vitro development and rapid multiplication o plant through tissue culture. The study was undertaken to enhance the in vitr production of Aristolochic acid in different tissue cultures. Cell suspension culture was established from friable calli of both the species in M liquid medium. Bergmann plating technique was carried out for cell line selection fo more production of Aristolochic acid. Primary transformation was carried out by Agrobacterium tumefaciens strain LBA4404 / pTOK233 with Gus and hpt genes to confirm the transgenic potential of A. bracteolata and A. indica. In order to enhance the productio of aristolochic acid in in vitro culture condition, the physical, chemical and biologica conditions were altered. Aristolochic acid was isolated, identified and purified from naturally growing plants as well as from tissue culture plants and all other cultur stages.

In Comparison to Literature : A Comparative Account

1.1 Historical background of the Embryology

Embryology is a branch of Anatomy. It is the study of growth and differentiation undergone by an organism in the course of its development from a single fertilized egg cell into a highly complex and independent living being like its parents. It explains how one develops before he is born. Important changes also take place after birth and continue to occur even to adult stage. eg: Replacement of RbC and WbC is a continuous developmental process and reverting to activities seen in prenatal condition is seen in healing of wounds. So the term ‘Developmental Anatomy’ which includes prenatal and postnatal development is preferred over term embryology as Developmental Anatomy, includes prenatal and postnatal development and as the term embryology refers truly prenatal (Intra uterine) development.

Aristotle (384-332/322 BC) proposed two theories regarding origin of life

Agroforestry is a new name for a set of old practices. The farmers have been practicing agroforestry since ancient times. The general concept of agroforestry is to integrate trees and agriculture so as to create a more diversified landscape, while providing the producers with new environmental and economic benefits. In other words, agroforestry is a method of farming that allows trees and shrubs to grow along with crops and/or livestock, therefore blending agriculture and forestry in the same production system. This relatively young science was brought from the realm of indigenous knowledge into the forefront of agricultural research four decades ago and was promoted widely as a sustainability-enhancing practice that combines the best attributes of both forestry and agriculture.

What is DNA

DNA is a simple molecule

DNA is negatively charged

DNA has lots of ring structures; ring structures are generally quite hydrophobic.

DNA is a very robust molecule.

DNA work has lots of toys.

Drought

There is no universally accepted definition of drought. Early workers defined drought as prolonged period without rainfall. Drought is a situation when the actual seasonal rainfall is deficient by more than twice the mean deviation. American Meteorological Society defined drought as a period of abnormally dry weather, sufficiently prolonged for lack of water to cause a severe hydrological imbalance in the area affected.

Prolonged deficiency of soil moisture adversely affected crop growth indicating incidence of agriculture drought. It is the result of imbalance between soil moisture and evapotranspiration needs of an area over a fairly long period as to cause damage to standing crops and to reduce the yields.

Postharvest handling is the stage of crop production immediately following harvest, including cooling, cleaning, sorting and packing. The instant a crop is removed from the ground, or separated from its parent plant, it begins to deteriorate. Postharvest activities include harvesting, handling, storage, processing, packaging, transportation and marketing. Losses of horticultural produce are a major problem in the postharvest chain. The diseases which develop on harvested parts of the plants like seeds, fruits and also on vegetables are the postharvested diseases. The amount or extent of damage depends mainly on the pathogen(s) involved, on the condition of the products and the condition of storage. Major tips to avoid postharvest losses include Tips to avoid postharvest losses include assessing maturity, to check your water quality, to check water temperature, avoid injury, keep the produce cool and proper storage.

“Storage” means the phase of the postharvest system during which the products are kept in such a way as to guarantee food security other than during periods of agricultural production at the marketing level, to balance the supply and demand of agricultural products, thereby stabilizing market prices. Grain, which includes dry kitchen ingredients such as flour, rice, millet, couscous, cornmeal, and so on, can be stored in rigid sealed containers to prevent moisture contamination or insect or rodent infestation. For kitchen use, glass containers are the most traditional method. Maturity indices are the sign or indication the readiness of the commodity for harvest. It is the basis for determining harvest date. Postharvest losses occur between harvest and the moment of human consumption. They include on-farm losses, such as when grain is threshed, winnowed, and dried, as well as losses along the chain during transportation, storage, and processing.

Abstract

The tradition of growing of flowers is age old. The flowers have travelled from the bowl of prayers to gardens to commercial sector for revenue. The quality concerned world demands for round the year production and supply of quality produce which can only be possible under controlled environment production. A range of location specific and crop specific infrastructures are being commercially used for production of planting material and flowers. General and crop specific guidelines for trade of cut flowers are available which the producers and policy makers must know for successful promotion of export of cut flowers from the country. The producer can also use practical methods for vase life study of their produce which is of great relevance in cut flower trade.

Keywords: Protected floriculture, trade, crop specific guidelines, export, cut flower

Introduction

Indian floriculture industry is shifting from traditional flowers to cut flowers for export purpose. The liberalized economy has given an impetus to Indian entrepreneurs for establishing export oriented units (EOUs) under controlled climatic conditions. The wide variations in agro climatic conditions in India permit us to grow various types of tropical and subtropical flowers. Though such plants grow successfully in open conditions without cover, they fail to meet the quality requirements of being blemish free. High quality ornamental plants meant for export should be scientifically grown only in plastic, glass or fibre glass greenhouses or at least under partial cover. Though initial investment is high in protected cultivation, the products in them will obtain far more attractive prices.

8.1 Introduction

In the fields like Physics, Chemistry, Biology, Engineering and Economics; their laws and principles contains various parameters and their derivatives. The mathematical relationships of such parameters with their derivatives constitute the differential equations. In calculus, differential equations were firstly introduced by Newton and Leibnitz. Newton listed the three kinds of differential equations:

8.1. Downy mildew of cruciferous vegetables

Cruciferous vegetables are important Kharif vegetable crops, which are grown both for table and seed purpose. This vegetable group constitutes crops like cauliflower, cabbage, radish, turnip, broccoli, brussel’s sprouts; knol-khol and rutabaga .The vegetable crops affected by downy mildews pathogen Peronospora parasitica are members of the genus Brassica and the downy mildew diseases on these crops are widespread in those regions of the world, which have cool and wet climate.

Geographical distribution

The downy mildew disease on cruciferous crops has worldwide distribution. The disease was first recorded in 1883 in USA on Brassica spp. (Farlow, 1883). In India, this disease was first reported by Butler in 1918. Subsequently various authors reported this disease from many countries of the world (Channon, 1981) particularly Angola (Serafim and Serafim, 1968), Argentine (Lindquist, 1939), Australia (Samuel, 1925; Anon., 1955), Austria (Glaeser, 1970), Bermuda (Waters-ton, 1940), Brazil (Grillo, 1937), Britain (Moore, 1959), Brunei (Herb. IMI), Canada (Jones, 1944; Downey and Bolton, 1961), Chile (Mujica and Vergara, 1960), China (Porter, 1926; Pai, 1957), Columbia (Orjuela, 1965), Costa Rica (McGuire and Crandall, 1967), Cuba (Fernandez Rosenada, 1973), Cyprus (Herb.IMI), Czechoslovakia (Rydl, 1968), Denmark (Gram and Rostrup, 1924), Dominica (Anon., 1972a), Egypt (Elarosi and Assawah, 1959), Ethiopia (Herb. IMI), Fiji (Anon, 1969), Finland (Herb. IMI), France (Darpoux, 1945), Germany (Neumann, 1955), Greece (Herb.IMI), Guatemala (Muller, 1950), Haiti (Anon., 1972a), Hong-Kong (Johnston, 1963), India (Thind, 1942), Iran (Ershad, 1977), Iraq (Herb.IMI), Israel (Peleg, 1953), Italy (Ciferri, 1961), Jamaica (Leather, 1967), Japan (Hiura and Kanegae, 1934), Kampuchea (Soonthronpoct, 1969), Kenya (Anon., 1957), Korea (Anon., 1972b), Libya (Herb.IMI), Malawi (Peregrine and Siddiqi, 1972), Malaysia (Mcintosh, 1951), Malta (Herb.IMI), Mauritius (Orian, 1951), Mexico (Rodriguez, 1972), Morocco (Herb. IMI) , Mozambique (Decarvalho, 1948), Nepal (Bhatt, 1966), Netherlands (Thung, 1926b), New Zealand

Extension Teaching Method

The function of extension education is to bring about desirable changes in the behaviour of a human being. The changes in human being are produced by increasing his/her knowledge level, improving skill and changing attitude. For all these to happen, an individual has to be taught, trained and communicated. So, the extension education emphasizes the process of communication, and if you examine, you will find that the extension education is broadly a teaching-learning process in which a learning situation is created by an extension worker/ teacher by which an individual attempt to change his/her behaviour. The learning situation created in extension education process is a condition or environment in which the elements like teacher, learner, subject matter, physical facilities and teaching methods and aids for promoting learning are present in a dynamic relationship with one another. The quality of learning depends upon the conditions created by the teacher for learners to learn. However, the learner is the key element in the teaching and learning process. His willingness and desire for change are very important. The third element; subject matter is the content of the message that the extension worker wants to transfer to the client. Transfer of the subject matter will be easy and effective if it is valid, correct, based on facts, applicable to practical life situation and need based. Effective teaching-learning process is also affected if physical facilities like place, light, ventilation, seating arrangements, etc., are not properly provided to both teachers as well as to the learners. Besides all these, the transfer of subject matters to the learners requires the help of suitable teaching methods, aids and media. Proper selection and handling of methods and aids facilitate in creating the desirable learning situation. The teaching methods and aids should be simple, easy to handle, suitable to subject matter, readily available, suited to the environment and needs of the learners.

Rural Sociology

Significant proportion of Indian population lives in village and derives their livelihood from villages. India is a land of agriculture and its customs, traditions, social structure, etc. are unique in the world. Understanding of rural society is must for successful implementation of developmental programmes. The understanding of rural people requires study of rural sociology. Rural sociology, as indicated by its name, studies rural society, rural social structures and institutions. The rural society is primarily depending on agriculture and hence rural sociology also concerns itself on the peasant society. There is a stark difference between the social structure, processes, social dynamics and social control in rural society and urban society. Thus, rural sociology has been specially designed to study the rural phenomena and it is a systematic study of the varied aspects of the rural society. It is the study of the rural social networks and how they operate for the smooth functioning of the society. The rural society is generally rooted in the villages, and rural sociology studies the facets of the villages, the way it functions, the various problems it faces and the how it tackles to face the imminent challenges. Rural sociology offers viable solutions and ways of mitigating the problems that hound over the villages.