eChapters

M13 is a single stranded filamentous DNA phage. Vectors have been developed from M13 phase by Joachim Messing (1983), which are suitable for preparation of single stranded DNA required for sequencing by Sanger’s method. These are derivatives of M13 wild type (size 6.407 kb).

This research seeks to address some major concerns of communication through cyberspace and its socio-cultural implications. In particular, it seeks to address the use of cyberspace or Internet as a potential medium of communication for the people of Odisha and the relatively positive and negative outcomes of the use of this medium. It investigates the current Internet-mediated communication practice in the twin city (Bhubaneswar and Cuttack) of Odisha and explores the social and cultural implications of the new communication mode.

Q. 1 Which option about the statements made below is correct?
(1) The cooling system maintains engine temperature at 71 to 82ºC for petrol engines.
(2) The thermostat valve begins to open at about 60oC and opens widely at about 71ºC.
(A) Statement (1) is true, but statement (2) is false.
(B) Statement (2) is true, but statement (1) is false.
(C) Both statements (1) and (2) are true.
(D) Both Statements (1) and (2) are false.

Fagopyrum acutatum (Lehm.) Mansf. ex Hammer (syn. Fagopyrum cymosum (Trev.) Meissn (Polygonaceae): Eng.- Medicinal Buckwheat / Perennial Buckwheat; Hindi – Kutu; Kash.- Tsok Hakh [RC]. A tall branched, puberulous annual growing wild in Drasss, Kargil, Gurez areas at 2800 to 3300 m amsl. Leaves tri-angular; perianth white. Grains acutely 3- cornered.

Gagea lutea (L) Ker Gawl (syn. Gagea elegans Wall ex G Don.): (Liliaceae): Kash.- Koker neeje [W]. A bulbous perennial herb inhabiting open subalpine slopes and forming groups. Leaves narrowly lanceolate. Basal leaf single, angular flat, exceeds the inflorescence, lanceolate linear, longitudinally furrowed at base. Flowers solitary on long pedicles, tepals yellow.

Iberis amara L. (Brassicaceae): Eng.- Candy Tuft [NI]. Half hardy annual ornamental herb. Leaves light green, lanceolate. Flowers borne in corymbs of light fragrant flowers, ranging in colour from white through pink to red purple.

Zantedeschia aethiopica (L.) Spreng. (syn. Calla aethiopica L.) (Araceae): Eng.- Arum Lily; Hindi – Iram sousan [NI]. A rhizomatous perennial, suitably planted in moist and shaddy situations and under green house conditions.

Fertilizer is a substance of natural or synthetic origin, applied to soils or to plant tissues (usually leaves) for the supply of one or more nutrients essential to the plant. It is classified in two types, inorganic fertilizers and organic fertilizers. Both the fertilizers play major role to the crops if they are properly and appropriately applied.

Q.1 SRSWOR scheme is better (more efficient) them SRSWR scheme.

Q.2 The sampling variance of sample mean under SRSWOR scheme is more than that in SRSWR scheme.

.3 The sample variance s2 is an unbiased estimate of population M.S. (S2 ) in case of SRSWOR scheme.

Q.1 The replicated experiment designed to compare a number of parent plants w. r. to some attribute under study is known as “Progeny row trial?

Alkaloids are a class of basic, naturally occurring organic compounds that contain at least one nitrogen atom. Alkaloids showed quite diverse medicinal properties (Rates, 2001). Many of them possess local anesthetic properties, but their practical use is limited for clinical purposes (Hesse, 2002). Morphine is one of the most known alkaloids isolated from Papaver somniferum (opium poppy), which had been used and still is for medical purposes. This alkaloid is a powerful narcotic which is used for the relief of pain, but its usefulness is limited because of its addictive properties.

Historical Development of Soil Science/Agriculture

Francis Bacon (1561-1624 A.D.): Found the water as nutrient of plants.

Van Helmont (1577-1644): Give the ideas about the role of soil as a simple source of water and minerals for the plants.

Technical Term                        Definition

Hydrology                               Hydrology is the science of water derived from Greek wordî hydro + logosî i.e., water + sciences and hance defined as the science which deals with occurrence, distribution and circulation of atmospheric water through unending Hydrologic cycle.

Technical Term                    Definition

Canal Irrigation System      The system in which irrigation water is supplied through irrigation canals network (main canal, submain canal, distributaries, and

                                            minors) from source of water (reservoirs) to point of application (agricultural lands)

Objective

1. To know the morphology of different spices and condiments.

Materials: The crop of spices and condiments available at Horticulture research farm

Method of observation: Identification of various spices and condiments plants by carefully observing the root, stem, leaves, inflorescence, flower, fruit and seeds of the plants.

General

1. Habitat: A habitat is an ecological or environmental area that is inhabited by a particular species of plant. The term typically refers to the zone in which the plant lives and where it can find food, shelter, protection and mates for reproduction It is the natural home of a plant. Each habitat has its own particular type of climate like:
   1. Tropical Spices: These are grown at 1800 m - 3500 m height from ground level eg. clove, nutmeg, cinnamon, konkam, galangal, small cardamom, vanilla, black pepper, ginger, turmeric.
   2. Subtropical Spices: These are grown at 300 m - 900 m height from ground level eg. cumin, dill, fennel, coriander, fenugreek, onion, garlic
   3. Temperate Spices: These are grown at 900 m - 1800 m height from ground level eg. saffron, asafetida, caraway seed, celery seed, savoy, caper, balm, origanum, calamus, thyme etc.

Objective

1. To know the different types of fertilizer application methods applied in spices and condiments.

Methods of fertilizer application: The different methods of fertilizer application are as follows:

a) Broadcasting

1. It refers to spreading fertilizers uniformly all over the field.
2. Suitable for crops with dense stand, the plant roots permeate the whole volume of the soil, large doses of fertilizers are applied and insoluble phosphatic fertilizers such as rock phosphate are used.

Broadcasting of fertilizers is of two types

1. Broadcasting at sowing or planting (Basal application): The main objectives of broadcasting the fertilizers at sowing time are to uniformly distribute the fertilizer over the entire field and to mix it with soil.

Fertilizer is a substance of natural or synthetic origin, applied to soils or to plant tissues (usually leaves) for the supply of one or more nutrients essential to the plant. It is classified in two types, inorganic fertilizers and organic fertilizers. Both the fertilizers play major role to the crops if they are properly and appropriately applied. To obtain maximum benefits, it is important to apply fertilizers at an appropriate time, amount and in a precise manner. The method of fertilizer application should be selected appropriately taking into consideration the age and stage of crop plants, their root extensibility, type of orchard management, kind and amount of fertilizers to be applied. The fertilizers should be given over the area of crop plants, where their active roots are spread. In fruit trees, fertilizer should be given in restricted area i.e. in the surrounding area of about 1 to 1.5 m away from the trunk of the trees in active root zone.

When to apply the fertilizers?

Majority of the crops require nutrients at different stages like growth & development, flowering and fruit setting time. In fruit crops, stages like new flushes emergence, floral buds differentiation and fruit development require more nutrients. Time of application of fertilizers may also vary depending on types of fertilizers, need of the crops, soil and climate.

1.1 Introduction

Python is an interpreter, high level, general purpose programming language developed by Guido Van Rossum and its first version was released in 1991. There are two major Python versions: Python 2 and Python 3. Both are quite different.

1.2 Beginning with Python Programming

1.2.1 Finding an Interpreter

Before we start Python programming, we need to have an interpreter to interpret and run our programs.

Windows: There are many interpreters available freely to run Python scripts like IDLE (Integrated Development Environment) that comes bundled with the Python software downloaded from http://python.org/.

Linux: Python comes preinstalled with popular Linux distros such as Ubuntu and Fedora. To check which version of Python you’re running, type “python” in the terminal emulator. The interpreter should start and print the version number.

macOS: Generally, Python 2.7 comes bundled with macOS. You’ll have to manually install Python 3 from http://python.org/.

4.1 Introduction to Function in Python

Python Functions is a block of related statements designed to perform a computational, logical, or evaluative task. The idea is to put some commonly or repeatedly done tasks together and make a function so that instead of writing the same code again and again for different inputs, we can do the function calls to reuse code contained in it over and over again. Functions can be both built-in or user-defined.

Function means sub-program

1. Function definition

2. Function call

Example:

def message: #function definition

print(?hello python”)

message() #function call

14.1 Basic Plotting: plot

This functionality on Series and DataFrame is just a simple wrapper around the matplotlib libraries plot() method.

Example

import pandas as pd

import numpy as np

df = pd.DataFrame(np.random.randn(10,4),index=pd.date_range(‘1/1/2000’, periods=10), columns=list(‘ABCD’))

df.plot()

Its output is as follows:

If the index consists of dates, it calls gct().autofmt_xdate() to format the x-axis as shown in the above illustration.

18.1 Library Introduction

This library contains modules for various types of functionalities. Some commonly use module of python standard library are:

(i) math module: which provides mathematical function to support difference types of calaculations.

(ii) cmath modules: which provides mathematical function for complex number.

(iii) random module: which provides function generation random number.

(iv) staticstics module: which provides mathematical satical function.

(v) urllib module: which provides URL handling function so that you can access websites from within your program.

1. NmPy library, provides some advance math functionalities along with tools to create and manipulate numeric arrays.

2. Scipy library, provides algorithmic and mathematical tools for scientific calculations.

Introduction

In the last two decades, there has been a significant change in the Indian society, not only in the terms of economics following the post 1991 reforms but also in the dietary and health sectors. There is an increasing demand for livestock products, as a result the farming systems are becoming more and more intensive. With the high input intensive agricultural practices on the one hand, the limitations in terms of environmental degradation, loss of biodiversity, health hazards to consumers, etc. are also on the rise which are acting as limiting factors to continue on the same path of intensification. To achieve sustainable intensification of agriculture, mixed crop-livestock systems, combining livestock and cash crops at farm level, are considered to be a good alternative (Russelle et al, 2007; Wilkins, 2008; Ryschawy et al., 2012). These practices benefit the environment by improving nutrient cycling (Hendrickson et al., 2008). In the agriculture based states of India, about 50% of the income is from the crop-livestock systems (Deshingkar et al., 2008). Mixed crop-livestock systems also generate higher economic efficiency in saving production costs through complementaries between crop and livestock (Wilkins, 2008). Apart from direct income by diversifying production, there is an added advantage of reducing risks with regard to market fluctuations (Russelle et al., 2007).

Introduction

Advancement in agricultural research has increased productivity however, in recent years, poor linkage of research - extension services hampering the growth of agriculture sector. Firstly, the research problems are investigated without considering the priority of agricultural producers Secondly, knowledge generated at the agriculture research stations is not effectively transferred to the producers. Many studies have identified the weaknesses in the linkages between the research and extension institutions are the major reason for development of technology and its transfer. In most countries including our country, the communication between research and extension agencies is weak (USAID 1982, FAO 1984). Research-extension-farmer linkages are seen to be absent or weak in many instances. At the same time, there are duplications of efforts, with a multiplicity of agents attending to extension work without adequate coordination (Planning Commission, 2008). This ineffective linkage between research and extension has impeded the generation and transfer of technology appropriate for small-scale and resource poor farmers, particularly those who work in relatively low productive and heterogeneous agro-ecological areas (Ewell 1989). Problems in technology generation and transfer arise because these components are considered in isolation (World Bank 1985).

Introduction

The modern biotechnologies (animal cloning, stem cells, and transgenesis) have contributed immensely to increasing livestock productivity, particularly in developed countries, and could help to alleviate poverty and hunger, reduce the threats of diseases and ensure environmental sustainability in developing countries. A wide range of biotechnologies are available and have already been used in developing countries in the animal science disciplines, i.e., animal reproduction, genetics and breeding; animal nutrition and production; and animal health. In animal reproduction, genetics and breeding, artificial insemination (AI) has perhaps been the most widely applied animal biotechnology, particularly in combination with cryopreservation, allowing significant genetic improvement for productivity as well as the global dissemination of selected male germplasm. Complementary technologies such as monitoring reproductive hormones, oestrus synchronization and semen sexing can improve the efficiency of AI. Embryo transfer provides the same opportunities for females, albeit on a much smaller scale and at a much greater price. Biotechnologies in animal health are used to increase the precision of disease diagnosis as well as for disease control and treatment. The Biotechnology Industry Organization claims that the genetic engineering of animals in agriculture offers ''tremendous benefit to the animal by enhancing health, well-being and animal welfare'' (Gottlieb and Wheeler 2008). Further, improvements are still needed in product composition and production efficiency, especially in growth, disease resistance, and reproduction. In this regard, transgenic animals stem cells, cloning and other emerging biotechnologies will have important roles in producing more and higher quality animal food.

Introduction

During the last decade, there has been a dramatic increase in use of artificial insemination (AI) by commercial swine producers in many European countries. Till 1990, less than 7% of sows & gilt in the USA were bred by Artificial Insemination. Today, over 70% of the animals are bred by AI. Maybe in a couple of years all swine producers will probably utilize this technology.

In India, it is still in infant stage. Some research work has already been done in scattered ways in various Research Institutes but it is still in the four walls of the laboratory. Some Govt. farms have been doing AI in swine with liquid semen.

Pig is the most important livestock in all Northeastern Hill States and there is no superior indigenous germplasm available in this region. Productivity of local pigs is very low. All through, improvement programmes had undertaken in different state Govt. farms, Central Govt. farms through upgrading with the help of suitable exotic pig breeds like Hampshire, Large Black, and Large White Yorkshire etc. Superior germplasm was distributed to farmers for better productivity. But, improvement till date is not impressive due to lack of superior germless, high feed cost, lack of breeder farmers and lack of incentives to the poor farmers. Maintenance of breeding boar for small farmers is very expensive not only in individual capacity but also on community basis. So, AI is the only tool for quicker, safer, quicker and economic why out for swine improvement like cattle.

Introduction

The science of Biotechnology has been making every effort to create new opportunities for the welfare of humanity. Modern biotechnological tools are applied in India to boost fish production through aquaculture as well as conservation of the vast aquatic resources of the country for sustainable utilization. Transgenic technology is widely used in biotechnology, from the generation of genetically modified (GM) foods to the production of pharmaceutical proteins. This technology has been successfully used to develop fast growing super-fish stocks for aquaculture. The main reasons for genetic manipulation of species used in aquaculture are to enhance the growth and efficiency of food conservation, to increase tolerance to environmental variables like temperature and salinity, to produce new colour variants of ornamental fishes, to increase the resistance of species to pathogens, etc. Though the conventional selective breeding approach has proven to genetically upgrade rohu19, it is a rather time consuming process. Traditional selective breeding approaches in combination with transgenesis can bring about faster improvement of selected traits.

Introduction

Genetic programs in livestock have been extensively used to improve their productivity over the last 50 years. The traditional approach of breeding, based on quantitative genetics principle, has been very successful (Schaeffer, 2006), without knowledge of genes increasing or decreasing in herds. Effective progeny testing program and use of genetically proven bulls have made drastic genetic improvement in livestock populations. Further advances in computation for genetic merit have further added to improvement process. Livestock producers presently are focusing on overall development of livestock with improved health, production, reproduction and longevity and therefore, the traits are becoming the part of selection program (Decker et al., 2009). Advancement in molecular biology along with high-throughput genotyping has led to discovery of a number of single nucleotide polymorphisms (SNPs) in livestock (Van Tassell et al., 2008). SNP arrays covering the entire genome may explain most of the genetic variation in important traits of livestock (Meuwissen et al., 2001). These SNPs may act as molecular markers and be used as a substitute for phenotypic selection. This process, in a broad sense is known as molecular or marker-assisted breeding and describes selection strategies including marker-assisted selection (MAS) and genome wide selection (GWS) or genomic selection (GS).

Introduction

In developing countries, ruminants thrive mainly on poor quality feeds and pastures, whose nutritive value is poor. They are having a low content of nitrogen, energy, minerals and vitamins and high content of lignin and silica, which limit their efficient utilization by ruminants. Therefore, these poor quality feeds and fodder needs to be upgraded in terms of their nutritive value using various treatments like physical, chemical, physico chemical and biological methods to improve intake and utilization of nutrients from poor quality roughages. However, supplementation of critical nutrients like energy, protein, minerals, vitamins also improved the productivity and health of the ruminants (Dass et al., 2011). Availability of oil cakes as protein supplement in developing countries is very poor and at a very high price, This has led to use of non-protein nitrogen source as urea, to compensate for the nitrogen deficiency of fibrous feeds (Dutta et al., 2009). Thus, enhancing intake, digestibility and availability of nutrients from poor quality roughages are only possible through optimization of rumen fermentation. The use of solid multi-nutrient block supplementation /urea-molasses blocks/ multi nutrients blocks/ pashu chocolates to provide optimum levels of various nutrients primarily for better growth of rumen micro organisms. They need rich sources of fermentable nitrogen, minerals and vitamins, which are lacking in the fibrous feeds like cereal straws (Sahoo et al, 2009). This offer several advantages such as easy transport, storage and handling, and reduced risks of poisoning as compared with other approaches, such as giving a small amount of urea in drinking water, sprinkling of urea solution on fibrous feeds before feeding, or urea-ammonization of crop residues (Dutta et al ., 2009).

Introduction

Incidence of ectoparasitism is on rise in the livestock population, impeding its production and performance. Those areas which were free of ectoparasites are now under great parasite load because of changing climatic conditions and global warming. Global warming has resulted in vectors shifting their habitats to temperate regions also. Ectoparasites are not only causing irritation to livestock by blood sucking and associated pruritus, they are serving as vectors for a variety of haemoprotozoan and rickettsiae leading to far-flung complications. Major ectoparasites infesting ruminants are ticks, lice, fleas and flies. Though ticks and flies are proclaimed as notorious for transmission of haemoprotozoans, now a days evidences are on rise reporting the role of fleas and lice as vectors for various haemoprotozoan and viral diseases. The need of the hour is to explore more and more ectoparasites to identify their vector potential and their effective control measures. While addressing the ectoparasitism in livestock, another major problem arises with their control. Most ectoparasitism is of seasonal nature at least in temperate areas, while it is a round the year phenomenon in tropics. Only very few compounds are available as ectoparasiticides and used by clinicians, and has resulted in onset of resistance among ectoparasites. New compounds need to be developed and marketed to counter this and at the same time it should be environment friendly also. Lest their rising use can lead to eradication of friendly fauna which can be more detrimental to the ecosystem. Now a days researches are focusing on the development of integrated tick/vector control measures which are making use of minimal chemical compounds and utilizing the synergistic application of farming techniques/practices and cultivating plants of acaricidal properties. In this era of pandemic, zoonotic nature of various haemoprotozoan/rickettsiae affecting livestock is also of concern to the mankind. So, they need to be addressed at the earliest considering their impact. The susceptibility to ectoparasitism varies from animal to animal.

The word cereal was derived from Ceres, the name of the Roman goddess of harvest and agriculture. Cereals are grasses (members of the monocot family Poaceae, also known as Gramineae) cultivated for the edible components of their grain (botanically, a type of fruit called a caryopsis), composed of the endosperm, germ and bran. Cereal grains are grown in greater quantities and provide more food energy worldwide than any other type of crop and therefore they are called staple crops.

System of Rice Intensification (SRI) was first developed in Madagascar during the 1980s SRI uses less inputs. It uses less seed, water, chemical fertilizers and pesticides but uses more organic manures. Rice grown with SRI technology has large root volume, profuse and strong tillers with big panicles, more and wellfilled spikelets with higher grain weight

Maize is one of the world’s leading crops cultivated over an area of about 194 million hectares with a production of about 1147 million tonnes of grain (2020). Among the maize growing countries, USA has the largest area followed by China, Brazil, Argentina, Ukraine and India. In respect of production also USA stands first followed by China. Regarding average yield per hectare USA ranks first followed by China. The average maize yield in India is only 3065 kg per hectare which is much lower than most of the maize growing countries of the world.

History of jute in India: In Mahabharata times the mention has been made regarding Jute garments as pattagam (patta produced) for jute fibre products and kitajam (insect produced) for silk products. In Ain-e-Akbari, there is mention of sack cloth made from jute, in Rangapur district.

Forages: The term forages denote plants that are used for feeding the animals that are cultivated in the farm, or it may be a wild used for stock feeding grown for the vegetative purpose. The vegetative phase is encouraged and the reproductive phase is suppressed.

The proposal presented takes into account the rationale of using natural source of immunity, discarding any preservatives or artificial flavors and additives. Collection of fresh produce followed by processing of fruits and vegetables, in the form of a veggie mix slushy which is ready to eat, ready to cook and easy to digest, through the use of sustainable retorting technology. The proposal takes into account the major problems regarding food for the elder like lack of digestion, in sufficient appetite, lack of value in terms of vitamins and minerals of food, also targeting the notion of feeling sick by taking multi vitamin and immunity tablets on a regular basis.

Diverse categories of Food Products such as canning, preservation of fruits and vegetables, processing of poultry products, dairy goods and many more present different challenges for wastewater disposal and regular use of water. A significant source of environmental pollution is the dissipated water generated from food product development and other agricultural tasks. This waste is being considered the most strenuous and requires a high amount of capital to convert this waste into reusable waste and the main reason behind this is different nutritional components such as inorganic and organic carbon compounds, nitrogenous elements, suspended and dissolved solids, high amount of biochemical and chemical oxygen demands (BOD & COD).

As a result of a number of health advantages provided by functional foods, a substantial rise in their popularity has been seen in recent years (Keservani et al., 2010).

Most of the starch sources are cereals (40 to 90%), tubers (65 to 85%), roots (30 to 70%), legumes (25 to 50%) which contain nearly 70% of starch on dry basis (Santana & Meireles, 2014). Major application of starch is seen in food production, where it is used as a thickening agent, for stabilization, adsorption, gelling, for binding aromatic compounds and as a film forming agent as well (Subaric et al., 2007). About 0.8-3.2 tons of CO2 per ton of plastic can be saved by using starch-based plastics (Patel 1999).

A number of quality management tools are being used in food processing industry. Often selection of such tools are tough as it involves several factors for decision-making. The problem of choice of quality management and tools can be solved by selection on the basis of the objective decision making process rather than on the opinion of the decision makers (Sukkarn and Thawesaengskulthai, 2015).

Wood apple (Feronialimonia) commonly known as Bael in various Indian sub-continent languages is the most under-utilised fruit despite of its aromatic flavor, high nutritional components and important medicinal values. Reason may be due to challenge in harnessing the pulp from the fruit. It is considered under seasonal fruit but it has long duration of shelf-life as compared to other fruits.The physic-chemical characteristics revealed that it has high shell weight of 55.67% as compared to pulp weight of 43.77% (Devi et al. 2018).

Vegetable oils and fats play a very important role in our diet. They provide essential fatty acids which are precursors of important hormones such as prostaglandins. They control many physiological factors such as blood pressure, cholesterol and reproductive system [1]. Coconut oil is a popular vegetable oil obtained from kernel of fruit coconut (Cocos nucifera). It is liquid at room temperature and bland in taste. Coconut oil is extensively used in cooking purpose in coastal tropical regions although it has been used in abundance for its medicinal properties.

Phytoplankton populations are important in shrimp ponds because they aid in shrimp nutrition and the removal of excess nutrients from the pond environment. They can be beneficial or have potentially negative consequences, depending on how they are managed.

All the plant biochemical processes are sensitive to change in temperature. Freeze or low-temperature stress in plants becomes lethal when the temperature is lowered beyond a critical threshold for a sufficient duration to cause irreversible damage to plant growth and development. This stress influences countless biochemical reactions which have certain temperature optima for their proper functioning.

As the vulnerability of different plant species to frost and low-temperature stress is quite variable, the symptoms are also variable, therefore. The development of visual symptoms depends largely upon the plant genotype, growing environment and tissue type being exposed to low-temperature stress.

The problem of frost damage to the crops is as old as agriculture is. Earlier, crop production was undertaken only as per the geographical distribution of the plant species and the cultivation of crops in non-conventional areas was not there. Later, with the expansion of agricultural activities, a number of introductions were made in the non-conventional areas. 

When avoidance or tolerance of frost is not possible and frost damage is inevitable, the active methods of frost protection are the way out for the protection of the fruit plantations. The methods which are employed just before or during a frost event for avoiding freeze damage are called Active Frost Protection Methods.

Liver is the largest exocrine gland located in right side of the abdominal cavity
obliquely from lumbocostal angle downward and forward to intercostal space,
about 3-4” (10 cm) above the abdominal floor.

The major functions of the musculoskeletal system to provide support to organs and help in physical activities including locomotion, prehension, and
mastication. The clinical manifestations of the diseases of muscles, bones and joints are much in common, and are generally characterized by lameness,
failure of support, in coordination of movement and deformity.

1. The following in meters for High Density Planting (HDP) which enhances the productivity of cashew
   1. 4 x 4
   2. 8 x 8
   3. 3 x 2
   4. 2 x2
2. Which of the following month for seed sowing of cocoa
   1. May – June
   2. December – January
   3. July – August
   4. February – March
3. The following week for seed germination in tea
   1. 2 – 3
   2. 8 – 10
   3. 4 – 6
   4. 1 – 2

1. The following hybrid of cocoa is a cross between CCRP 1 x CCRP 7
   1. CCRP 6
   2. CCRP 9
   3. CCRP 10
   4. CCRP 8
2. VHC-3 hybrid of coconut is developed by
   1. Aliyar
   2. Veppankulam
   3. Pattukottai
   4. TNAU, Coimbatore
3. Which one of the following varieties of coffee is multiple crosses
   1. Selection 2
   2. Selection 1
   3. Selection 4
   4. Selection 3