eChapters

Amongst agricultural commodities milk is the single largest contributor to gross value of output followed by paddy, wheat, oilseeds, pulse and sugar. It is not only that, milk is also least contributor to inflation.Thus it can be said that milk is the lifeline of Indian economy. Unlike developed countries, unique feature of Indian milk production system is that about 70% of it is produced in about 70 million household dairy units in rural areas.Dairy farming has always been a subsystem of agriculture in such household units which entirely depends on the recyclable crop residues. Moreover the milk production system has been mainly confined to landless labourers, small and marginal farmers.Their poor socioeconomic condition, religious sentiments for cattle and utilitarian attitude towards dairy farming coupled with poor milk production potential of dairy animals has remained a major impediment in the overall development of the system. Livestock is an important source of supplementary income. Mixed farming has been serving as an insurance against natural calamities, while supporting food security and nutrient recycling. India has over 500 million livestock, which include cattle, buffaloes, sheep and goats. Among them, cattle and buffaloes are popular for milk production. As milk is an important part of the Indian diet and bullock power is essential as draft animal for farming and rural transportation.

India is emerging as a global economic power and the economy is growing at an average of 8 9 per cent for last couple of years.The Dairy sector is contributing significantly to the national economy and with 112 Million Metric Tonns (MMT) milk productions during 200910; it ranks first in the World. It provides gainful employment and supplementary income to large number of people. Dairy sector contribute significantly on poverty reduction in rural areas as income from milk in the total income of underprivileged family is as high as 75 to 80% during drought and the employment generated is relatively high. Dairying has become an important secondary source of income for millions of rural families and has assumed an important role in providing employment and income generating opportunities.

Mechanization is viewed as package of technology to increase land productivity by improved timeliness of operations, reduced crop losses and improved quality of agro-produce to increase efficiency of inputs used through their efficient measurement and placement, to increase labour productivity by using labour saving and drudgery reducing devices and reduce cost of cultivation. echnology and machinery enhanced the ability, quality, accuracy and efficiency of the human being. By using technology in any field the rate production and quality automatically increases. The country witnessed unprecedented growth in agriculture which has helped India to graduate from hunger to self sufficiency in food grains by increasing the food grain production from 51 million tonnes to 208 million tones. The estimated contributions of improved agricultural tools and equipment in augmenting total food production of India is encouraging; savings in seeds: 15-20%; savings in fertilizers: 15-20%; savings in time: 20-30%; reduction in labour: 20-30%; increase in cropping intensity: 5-20%, and increase in productivity 10-15 per cent. The major issues before Indian agriculture with respect to mechanization are; tractorization vs mechanization, custom hiring and contract farming, horticultural mechanization, effective extension activity, sugarcane mechanization, hill agriculture and industry institution interaction. The main technologies which can be taken to farmers’ field for enhancing productivity and production Aqua-ferti seed drill, two row powered seeder, okra planter, tractor mounted inclined plate planter, tractor mounted rotary tiller (Rotavator), tractor mounted zero-till drill, tractor mounted raised bed planter, tractor mounted sett cutter planter for sugarcane, pneumatic planter, vegetable transplanter, low land manual rice seeder, self-propelled rice transplanted, self-propelled power weeder, tractor operated aero blast sprayer, tractor mounted vertical conveyor reaper, maize dehusker-cum-sheller, tractor operated straw reaper (combine) and tractor operated fodder harvester. These technologies need to be introduced after necessary modifications and adjustments, depending upon the agroclimatic and terrain and soil conditions, through proper mode e.g. as individual /group ownership, on custom hiring basis or mechanization package for contract farming.

Mushrooms are fleshy fungi constituting a purely vegetarian diet, which is very tasty and nutritious. Some mushrooms are edible whereas others are poisonous. So far, more than 1600 types of mushrooms are known of which, nearly 100 have been accepted as food worldwide. Diversification in any farming system imparts sustainability. Mushrooms are one such component that not only impart diversification but also help in addressing the problems of quality food, health and environment related issues. One of the major areas that can contribute towards goal of conservation of natural resources as well as increased productivity is recycling of agro-wastes including agro-industrial waste. Utilising these wastes for growing mushrooms can enhance income and impart higher level of sustainability (Manjit Singh et al., 2011).

Mushroom cultivation activities can play an important role in supporting the local economy by contributing to subsistence food security, nutrition, generating additional employment and income through local, regional and national trade; and also offering opportunities for processing enterprises. Among the 33 globally cultivated types of mushrooms 3 mushrooms i.e. white button, oyster and paddy straw mushrooms are popularly grown in India.

Honeybees are marvelous insects known to mankind since the prehistoric times. The art of their scientific management is called as apiculture or beekeeping and the place where hives are maintained is called apiary. Beekeeping is a decentralized, forest and rural agriculture based industry, which does not require any raw material. The raw material needed is in the form of nectar and pollen, which is freely available from flowers in nature. Bee hives neither demand additional land space nor do they compete with agriculture or animal husbandry for any input. The beekeeper only needs to spare a few hours in a week to look after his bee colonies. Beekeeping is therefore ideally suited to him as a part-time occupation. Beekeeping constitutes a source of sustainable income for the rural and tribal farmers. It also provides them valuable nutrition in the form of honey. However, in addition to honey, production of bees wax, propolis, pollen, royal jelly, pedigree queen bees, package bees and renting out honey bee colonies for crop pollination are some of the potential areas of apicultural diversification in India (TOI, 2012).

Most of the horticultural produce is of perishable nature and must be protected from postharvest losses, which start from the field itself. Therefore, adoption of proper packing house operation plays a very crucial role in minimizing postharvest losses

Although, we have reached new heights in the production of fruits comparable to China, Brazil and USA and in vegetables to China, yet we are far behind in postharvest management of these perishables, primarily due to lack of appropriate infrastructure. Test studies conducted in Australia have indicated that the distribution cost of perishable horticultural produce is assumed 5 to 9 times, the production cost. Further, packaging accounted for 25-50% of the wholesale price of fruits and vegetables. In India, huge losses of horticultural produce (25-30%) after harvest are encountered mainly due to non-existence of packing house concept.

Packing house operations essentially begins with the use of proper field containers, field transport, temperature protection of harvest produce, sorting, sizing, grading, packing, which are essential preparatory steps to storage, shipment and subsequent marketing. Depending on the kind of produce, additional activities viz. degreening, curing, washing, ripening, waxing, precooling etc. are done. The sequence of activities varies with the crops. A considerable quantity of postharvest losses of horticultural produce could be minimized by adoption of various packing house operations described below:

Agriculture shapes the foundation of Indian economy and despite the fact that there has been vast industrialization in most 60 years; horticulture still occupies a place of significance. In India, approximately 20-25% of the horticulture produce goes waste due to improper post harvest operations which reduces the growers share in the present marketing arrangements. The grower is getting hardly 25-35 paisa of a consumer rupee. The Value addition activities where the fruits and vegetables are processed, that fetches higher remunerative prices of the produce. Such opportunities are presently not available in rural areas but could be created through selective mechanization of agriculture and appropriate post harvest management and value addition to the harvested biomass in the production catchments.The agricultural produce involves operations like cleaning, grading, drying, storage, milling, packaging, transport, marketing and utilization. At the end of each operation, value is added to the product. The lowest and the highest monetary values of a food commodity are, respectively, when it is in raw and fresh form and when it is in processed and ready to consume/eat form. Post harvest and food processing technology are commodity and location specific. It prevent avoidable post harvest losses and adding value to the fresh agro-produces. It also creates opportunities for employment and income generation. Integration of production agriculture with on-farm primary processing is needed to have higher and sustainable production, productivity and better quality end products for domestic and export markets. It would help in reducing rural- urban disparity and ensuring household food and nutritional security for all at an affordable cost. The technology is available and a wide range of tools, machines and equipment are used in post-production of agriculture. The globalization of trade may compel many agro processing industries to rely on an imported technology at a high cost and the advantage of such technology may be availed by a few who have an exclusive business interest. Majority of agriculture-based enterprises will continue to depend upon indigenous technology and, therefore, R&D through public support has to be strengthened to become globally competitive and serve small-scale food processing sector of the country.

India produce a wide range of tropical, subtropical and temperate horticultural crops at different places by virtue of its varietals agro- climate conditions. The total annual production of fruits and vegetables is around 135.5 million tones, fruits being 48 million tones and vegetables around 87.5 million tones. India is the second largest producer of fruits and vegetable in the world. They are major sources of important valuable vitamins and minerals. Being highly perishable, fruits and vegetables can be preserved and processed either at farm level or at cottage scale/home scale during market glut season or extra seasonal produce from kitchen garden for later use. Farmers and entrepreneurs can set up their own processing units by adopting simple, low cost innovative processing technologies which will save post harvest losses of these perishable crops and also give good returns to grower and better earning to processor/ entrepreneurs.

Cereals and pulses are the staple food in India, thus it has to be stored by producers in their homes and by traders and government agencies. Variations in the season i.e., warm and high humidity weather is highly conducive to proper development and rapid multiplication of storage insect pests. Almost all insect pests of stored grains have a remarkably high rate of multiplication and within one season, they may destroy 9-10% of the grains and contaminate the rest with undesirable odors and flavors. The type of insects infesting grains vary and include weevils, moths and beetles. Apart from this it is necessary to control or kill egg, larval, pupal and adult stages of the insect. After proper cleaning and drying the produce is stored where damage can be caused due to cross-infestation or infestation already left in the produce. Grains are stored in different types of receptacles and to protect it, different protectants are being used since from the early days. The success in the use of these protectants (organic, inorganic or inert) depends upon the effect on the grain, killing of the insects, practicability, period of storage and lastly the physical and chemical state of treated seeds.

1. Inert dusts

Inert dusts are fine powders chemically inactive but cause considerable insecticidal activity by mechanical abrassing and physical absorption of moisture proofing layers of insect integument. The use of inert dust was initiated sometimes during World War II. Some common inert dusts are ashes, clays, gypsum, lime, magnesite, Nakki, silica, talk, phosphates, diatomaceous earth. It was reported that though most of the dust proved effective and convenient to use but it is difficult to remove it and clean as it goes inside the infested and damaged grains. The dust can only kill larvae and adults moving in between the grains. Once any stage of insects entered inside the grain, it is beyond the reach of the dust.

As early as in the 18^th century, the anaerobic process of decomposing organic waste was known. During 19^th century, it became clear that anaerobic bacteria are involved in the decomposition process (DST, 1981). Since that time, the applications of anaerobic digestion have grown steadily, in both its microbiological and chemical aspects. The process of anaerobic digestion possesses a double advantage i.e. the process in addition to providing good quality manure also supplies a large volume of combustible gas. Anaerobic digestion provides some exciting possibilities and solutions to such concerns as alternative energy production, handling of human, animal, municipal and Agro-industrial wastes safely, controlling environmental pollution and expanding food supplies. The technology of anaerobic digestion (Kumar et al., 2015) has not yet realized its full potential for manure and energy production even in developed and industrialized countries. In developing countries expansion of this technology has been hindered because of the need for better economic initiatives, organized supervision, proper training and education.

During twentieth century, the method of anaerobic fermentation or digestion was successfully applied by sewage chemists. A considerable amount of research work was carried out by sewage chemists on different aspects of the digestion process and sludge digestion plant, were installed. The gas produced was used for burning as domestic fuel, operating machinery and for tractors. In this context, the studies on anaerobic digestion of cattle dung and vegetable waste has been important. The work is particularly important ones in the Indian context as long as gas production and plant design efforts are concerned. For research on anaerobic digestion energy part (methane generation) received more attention since the early decades of this century when research into bio digestion had gradually begun to take shape. Fertilizer aspect received occasional attention a couple of decades later. The engineering and micro biological aspects of gas production remain a dominant preoccupation even up to 1990s. Emphasis on the energy aspect still dominates in many parts of the world today.

Indian agriculture, accounting for 25% of the nation’s Gross Domestic Product (GDP), 15% of exports and 60% of the employment continues to be the mainstay of economy. Having achieved laudable success in agricultural production in the last 50 years (50 Million ton to 210 Million ton) India has transformed herself from a food deficit country to a food surplus country. Still there are many challenges, which Indian agriculture is facing, in a fast changing technical and socio-economic scenario. Relating to the natural resources and production base, water has emerged as the most crucial factor for sustaining the agricultural sector. India accounts for 16 percent of the world’s human population and nearly 30% of the cattle with only 2.4% of the land and 4% of the water resources.Even if the full irrigation potential is exploited, about 50% of the country’s cultivated area will still remain unirrigated, particularly with the current level of irrigation efficiency. The share of water for agriculture would reduce further with increasing demand from other sectors. But the water demand for agricultural purposes is estimated to increase in order to produce more cereals, horticultural produce and raw material for a fast expanding food industry. Efficient management of water is, therefore, key to future growth of Indian agriculture. The requirement of water by all sectors in 2025 is estimated to be 105 M ha m (Water Resources Development in India, 2010). Share of water for agriculture is expected to get reduced from the present level of 85 % to 69 % by 2025. On the other hand, the actual agricultural water demand is estimated to increase from 470 Billion Cubic Meters (BCM) in 1985 to 740 BCM in 2025. During the same period, the demand for non-agricultural use of water will multiply fourfold from 70 BCM to 280 BCM. The water use efficiency (WUE) in Indian agriculture, at about 30-40%, is one of the lowest in the world, against 55% in China.

What is biofertilizer?

Biofertilizers are ready to use live formulates of such beneficial microorganisms which on application to seed, root or soil mobilize the availability of nutrients by their biological activity in particular, and help build up the microflora and in turn the soil health in general.

Why should we use biofertilizers?

With the introduction of green revolution technologies the modern agriculture is getting more and more dependent upon the steady supply of synthetic inputs (mainly fertilizers), which are products of fossil fuel (coal+ petroleum). Adverse effects are being noticed due to the excessive and imbalanced use of these synthetic inputs. This situation has lead to identifying harmless inputs like biofertilizers. Use of such natural products like biofertilizers in crop cultivation will help in safeguarding the soil health and also the quality of crop products.

Scientific agriculture is the only solution for increasing productivity of various crops and the input resources most effectively. Fertilizer, the most efficient and often the most expensive input can be applied to crops on the basis of generalized state level fertilizer recommendations. However, state level fertilizer recommendations do not take into consideration fertility status of the field which is neither uniform nor constant and which varies from field to field. Sometimes more fertilizers are added leading to unnecessarily higher investment, while under another situation, inadequate quantities of fertilizers may be added, resulting in lower returns. Inefficient and imbalanced uses of fertilizers affect both soil health and agricultural productivity.

Therefore, the best and most effective method for fertilizer recommendation is soil testing. It is a mode of assessing the nutrient supplying capacity of a soil.

Insect pests, diseases and weeds are major biotic bottlenecks in the production of crops, inflicting on an average about 30% yield loss. Monetary value of these losses has been estimated to be exceeding Rs 1,00, 000 crores. There is thus ample scope to enhance our food production by curtailing losses due to pests to certain extent. Only option to boost our production remains in growing improved crop cultivars with better pest management options. Mainly synthetic pesticides have been used to combat pest menace in agriculture and public health. Pesticides have, of course, played a commendable role in increasing our food production and protecting us against disease vectors. However sole reliance on pesticides has created several problems such as development of resistant pests, pest outbreaks, mortality of useful organisms, adverse effect on human health and environmental degradation. Adverse effects of pesticides prompted scientists to look for safer and environment friendly methods of pest control and consequently concept of pest management came in to being.

Pest management is known as an ecological approach to tackle pest problems, because here emphasis is on containing pests in such a way that other biotic components of the system such as natural enemies, human beings and wildlife etc are not harmed and environment is preserved in general. Pest management works on the premise that all pest population levels are not injurious to crops and crops can always compensate for certain injury due to pests. Moreover, some pest population is always required for the survival of natural enemies of the pests. This has given rise to the concept of economic injury level (EIL), which helps to avoid unwarranted application of pesticides. The EIL based pesticide application ensures favourable cost-benefit ratio to farmers. Pest management also underlines that pest control tactics should be socially acceptable and within the reach of farmers. It is a holistic approach to pest problems in which we aim to protect our commodities against all the pests and ensure production of healthy crops.

Plant parasitic nematodes are microscopic, thread like, soil-born organism, found in every conceivable environment. Severity of nematodes as plant pathogen is more a problem in tropical than temperate climate. These organisms are basically root feeders causing injury to the plants, which adversely affect the function of the root to absorb and translocate nutrients and water efficiently. This result into nutrient deficiency like symptoms, and as such nematode problems go unnoticed. Such symptoms are not corrected even after a dose of fertilizers.

Based on feeding habits, they are classified as migratory ectoparasitic, sedentary semi-endoparasitic or endoparasitic nematodes. They feed silently but constantly without killing the host producing debilitating symptoms and in the process reproducing to great numbers at the end of the crop season. Normally, nematodes complete their life cycles in a span of 20-25 days at temperature of 25-30 °C. They have a great egg laying capacity, which varies from 40-1000 eggs.

The most important nematode is root-knot nematode, Meloidogyne sp. distributed worldwide and can infest more than 2000 species of plants. Cereal cyst nematode, Heterodera avenae - an important nematode pest of wheat, barley and oat, citrus nematode, Tylenchulus semipenetrans associated with citrus dieback and slow decline, burrowing nematode, Radopholus similis causing spreading decline in plantation crops, the reniform nematode, Rotylenchulus reniformis in vegetables and cotton and the rice root nematode, Hirschmanniella spp in lowland rice are few other damaging nematodes.

Weeds have been existing on the earth ever since the man started domesticating /cultivating plants and animals around 10,000 B.C. and recognized as a problem since then. The battle against weeds is a never ending one and often the costliest agronomic input for successful crop production. Weeds are most under estimated crop pests in tropical agriculture although they cause higher reductions in crop yields than other pests and diseases. Of the total annual loss of agricultural produce from various pests in India, weeds roughly account for 37%, insects for 29%, diseases for 22% and other pests for 12%. Weeds decrease quantity and quality of the produces [food, fibre, oil, forage/ fodder, animal products (meat and milk)] and cause health hazards for humans and animals. Therefore, weed control is very important for a successful crop production.

The solanaceous group of vegetables (tomato, eggplant, chili and bell peppers) generally take up large amounts of nutrients. The amount of nutrients they take up depends on the quantity of fruit and dry matter they produce, which in turn is influenced by a number of genetic and environmental variables. Tomato (Solanum lycopersicum L.) known as Tamatar in Hindi is one of the most popular and widely grown vegetables in the world ranking second in importance to potato in many countries. Tomato is widely grown in almost all parts of India and is adapted to wide range of soil and climate conditions. Tomato is consumed either as raw or cooked and is also very important crop for processing in the form of soups, juice, ketchup, puree, paste and powder. Tomato adds variety of colours and flavour to food.

Tomato is very well known for its nutritive value. Attractive red colour is due to lycopene pigment, pink and yellow colours are due to presence of anthocyanin and carotene pigments. Tomato is rich source of ascorbic acid, which varies from 15-31 mg per 100 g of fresh weight. Tomato also provides minerals like calcium, iron, magnesium, phosphorus and sodium. Tomato is also rich in medicinal value. The pulp and juice is digestible, promoter of gastric secretion and blood purifier. It is also considered to be intestinal antiseptic. It is one of the richest vegetables, which keeps our stomach and intestine in good condition.

Crop diversification has been well recognized as an effective strategy for achieving the objectives of food and nutritional security, income growth, poverty alleviation, employment generation, judicious use of land, water and other natural resources, sustaining agricultural development and environmental improvement. Vegetable crops being rich sources of various health building substances, especially vitamins and minerals, offer unique advantage for food and nutritional security, tackle malnutrition and dietary deficiency diseases. Besides, their high yield potential per unit area and time, diverse varietal wealth, labour intensiveness, high market price and prospects of processing, value addition and export, they play an important role in employment generation, and livelihood improvement. Since India is endowed with diverse agro-climatic conditions, almost all kinds of vegetable crops are grown in one or other corner of our country. More than 200 different vegetables are grown in India, of which, about 70 types are cultivated commercially. Vegetable production scenario in India has made a remarkable progress since independence from a meagre production of 17.5 million tonnes to 146 million tones, with a productivity of 17.3 t/ha. India is the second largest vegetable producer in the world after China. However, it needs to be doubled by 2020 in order to meet the nutritional requirement of burgeoning population in the country. With increasing purchasing power of people, the demand for vegetables has increased enormously, as a result the prices of vegetables have increased and it has been the dominant factor for high inflationary pressure in Indian economy during recent years. Inclusion of different vegetable crops with shorter maturity period in the prevailing cropping system will enhance the total system productivity, which may go a long way in improving the economic as well as physical health of small and marginal farmers.

Indian horticulture has made a rapid stride, converting the country from food scarce to self sufficiency. The horticulture, which includes fruits, vegetables, spices, flowers and medicinal and aromatic plants, has proved beyond doubt its potentiality for gainful diversification. One of the significant developments is that horticulture has moved from rural confine to commercial production, and this changing scenario has encouraged private sector investment in production system management. Since the growing of fruit crops is highly rewarding to the farmers in terms of returns per unit area, the horticulture sector is expected to contribute significantly for the food and nutritional security, employment opportunity and poverty alleviation.

In recent past, several innovations and new initiatives have been made both in research and development for improving production, productivity, quality and marketing and to identify critical gaps in various emerging areas in fruits & horticulture technology. Some of the brief details are discussed on under:

High yielding superior fruit varieties for commercial cultivation

Mango: The mango varieties have been developed as a national priority at IARI, which are highly popular amongst the fruit growers of India. The important features of these hybrids are summarized below:

Fruit production is gaining momentum in the country. With the production about 90.18 million tonnes of fruits from 6.30 million ha in 2015-16, India is the second largest producer of the fruits in the world after China. During the past three decades, international trade in fruits has seen a rapid expansion.The newer markets are now opening for Indian produce e.g. Japan and USA have opened the route for Indian mangoes. At domestic level, the increase in demand of fruits for consumption both in fresh and the processed form has been evident. The income and livelihood security from this sector are increasing. The government has also supported the horticulture sector particularly area expansion and productivity enhancement of fruits through technological interventions like drip irrigation, fertigation, emphasis on integrated nutrient management, production of high quality planting material etc. Selection of an ideal variety and availability of plant material from a reliable source is the basis for achieving high yield and quality uniform produce. Lack of clonal uniformity not only leads to the problems in crop management but also the differences in maturity may cause delay in commercial picking. A number of improved fruit crops’ varieties have been developed during past few years, which ranged from the high yielding to stress resistant to high quality produce. In fruits and plantation crops more than 150 high yielding varieties suitable for various purposes have been developed. A list of some popular cultivars and new cultivars in major fruit crops has been given here (Table 1).

The floriculture has become an important sector all over world. In India, floriculture has been associated with culture and heritage since very ancient time. In recent decades there has been increasing in demand of floriculture products with increasing income. It is souring industry in Asian countries including India. Floriculture is an emerging area with great potential both in the domestic as well as export market.In India, commercial floriculture is ongoing development but have a long tradition of various types of flowers.Floriculture was being cultivated in 3.5 lakh hectares in the country and 250 varieties of flowers exist in the country.Besides potted plants, roses, carnation, orchids and chrysanthemum are important cut flowers, which are popular in our country. In the increasingly competitive international cut flower and pot plant market, new and novelty ornamental plants plays an important role in stabilization and expanding market share. Always novelty has been considered as an important attribute in ornamental industry. The consumer choice is also changing for product quality level depending upon purpose of purchase, as well as for higher levels of services and a wider and deeper assessment suggesting product diversification. The increasing pace of agricultural transformation in India has been characterized by widening share of commercial crops in the overall basket. Among others, horticulture has shown great promise because of the availability of high-value domestic and international market against the low production base so far. Understandably, it has received special attention of policy-makers and being termed as the sunrise industry within agriculture. India, with its varied agro-climate is ideally suited for growing several types of flowers in different seasons. Although traditional ornamental crops will continue to play key role in the floriculture trade, a distinct trend towards increasing the share of new crops is clearly evident in recent years often referred to as ‘specialty flowers’, these are cut flowers, which are not widely known and also grown in small pockets but have high prospects in the international market. There are over 60 types of new ornamentals, which have been reported to hold potential for commercial utility. Some progressive growers in India have already initiated the process of introducing new ornamental crops in their fields.These new products normally fetch high prices than the traditional crops for a certain period, but quite often the prices drop when market is saturated. By that time new products should be ready to enter the market. In this context introduction of new ornamental crops is therefore continuous effort.

India has emerged as the second largest producer of vegetables 176.17 mt after China 573.93 mt in the world and is gradually striding towards achieving food and nutritional security at national level. The average productivity of vegetable crops is 17.6 t/ha (NHB, 2015) which is comparatively lower than the productivity of China (23.4t/ha), Spain (39.3t/ha) and USA (32.5t/ha). The lower productivity could be attributed to limited use of quality seeds, inefficient production management, impact of biotic stress and climatic factors during crop production. Among the limiting factors limited availability of quality seed is one of the important factors. Since, the performance of other inputs is also depend on the quality of seed. At present the seed replacement rate among vegetable crops is around 25%, whereas highest in cabbage (>90%) followed by tomato, capsicum, bitter gourd, muskmelon, bottle gourd etc.The use of hybrid seed is in increasing due to higher productivity, tolerance to biotic and a biotic stresses and better market value than the open pollinated varieties but the higher price of the hybrid and their availability is still a constraint in adopting the use of hybrid seeds among small and marginal farmers.

India has made a considerable progress during the last three decades in horticulture production in India producing 300.6 million tonnes of horticultural produce from 24.85 million hectares in 2016-17. The average productivity of different horticultural crops is quite low as compared to the best yields at national and world level, indicating the scope to enhance the yield in different horticultural crops by many fold along with its quality specially in vegetables. Unlike vegetables, flower cultivation is growing at a very fast speed and registered a marked growth along with employment generation through protected cultivation. According to NHB (National Horticulture Board), during the year 2014-15 the area under floriculture production in India was 248.51 thousand hectares with a production of 1,658 thousand tonnes loose flowers and 484 thousand tonnes cut flowers. However, India’s total export of floriculture was Rs. 548.74 crores/ 82.05 USD Millions in 2016-17. This is because of an appealing gap between potential yield and the actual yield of various vegetable crops. In many vegetable crops, the yields realized are even less than 50 % of their potential yield. Due to fluctuating market prices and poor storage infrastructure available for horticultural crops, farmers are not able to get their production cost. Though, there are some crops, fetches high prices during off-season. Several biotic and abiotic stresses are major factors, responsible for low productivity and poor quality in several horticultural crops under their open field cultivation during rainy and post rainy season more specifically, in vegetables. The increasing demand of off-season and high quality vegetables in various markets of the big cities has drawn the attention of the vegetable growers for diversification from traditional system.

Sugarcane is the most important sugar crop contributing more than 62% of the world's sugar production. With increasing human population in the world, sugar requirement has also gone up. Molasses is an important by-product of sugar industry. It is used for the production of alcohol by the distillaries. Alcohol serves as a base material in pharmaceuticals and several other industries. The manufacture of gur (jaggery) and khandsari as alternative sweetening agents in India from sugarcane also plays considerable role in the Indian economy, particularly in rural area. Nearly 40 % of the sugarcane produced is utilised for manufacture of gur and khandsari. Sugarcane is bound to play a greater role in the Indian economy in the years to come by offering a stable income to the farmers by way of cane price, by providing employment to rural masses, by realising excise duty, Cane Cess/ purchase tax and foreign exchange earning.

Acreage and production

Sugarcane is grown in tropical and sub tropical regions. Brazil has largest area and production of sugarcane.India is second to Brazil in sugarcane production. It is followed by Cuba and China. Other important cane growing countries are Pakistan, Mexico, South Africa, Australia, Indonesia etc. So far, as average sugarcane productivity is concerned Peru ranks first in average sugarcane yield. To meet the sugar requirement of increasing population in future, it is essential that sugarcane production is stepped up. Since there is no scope at present to bring additional land under sugarcane, productivity of sugarcane, the targets have to be achieved only through increased productivity.

Rice is the most important crop in India occupying about 43.7 million hectares area with a production of 136.5 million tonnes (rough rice/ paddy). As the human population is increasing, so is the demand for rice, yet yields of the crop are leveling out. At present, the rice yield in India is 3.12 t/ha as against the world average of 4.11 t/ha. Not only this, the rice yield in India is exactly half than that of China (6.26 t/ha). The World Development Report 2008 predicts that cereal production would have to increase by 50% by 2030 to meet the escalating worldwide demand. The additional rice for increasing population will have to be produced on less land with less water, less labour, and reduced inputs.The major constraint in rice production in India is the lack of suitable crop management practices and sufficient irrigation facilities. The water crisis is threatening the sustainability of the irrigated rice system and food security in many parts of the world. Despite efforts on a variety of fronts, including genetic engineering of rice strains for improved yield and nutrition, no concrete solution has been found yet. There is a challenge to develop novel technologies and production systems that allow rice production to be maintained or increased in the face of declining water availability. To produce 1 kg of grain, farmers have to put 2 to 3 times more water in rice fields than in those growing other cereals.

The increasing water need for agriculture poses a potential threat to natural water resources and climatic change scenarios in the near future. The great challenge will be to increase food production with less water, particularly in countries with limited water and land resources, by promoting techniques and cropping systems of higher water-use efficiency (WUE).There is also much evidence that water scarcity already prevails in rice-growing areas in India, where rice farmers need technologies to cope with water shortage and ways must be sought to grow rice with less water.The farmers, especially those, who are resource-poor, are losing interest in rice cultivation as its profitability is declining with the rise in input costs. But, system of rice intensification (SRI) and aerobic rice culture appear to be a viable alternative of rice cultivation that may save the expensive inputs, improve soil health/ quality and protect the environment substantially.

Introduction

Lentil is one of the important Rabi pulses. It is one of the oldest pulses crops and the most nutritious of the pulses. It has the potential to cover the risk of dryland agriculture. It is also used as a cover crop to check the soil erosion in problem areas. It is mostly eaten as ‘dal’. Lentil can also be used as green fodder. Its straw is also used as cattle. Being a leguminous crop, it restores the soil fertility.

Area of cultivation

Lentil is mostly cultivated in the northern and central parts of India. The important lentil growing states are Madhya Pradesh, Uttar Pradesh, Bihar, West Bengal, Orissa, Haryana, Rajasthan, Punjab and Assam. Uttar Pradesh and Madhya Pradesh together contribute 78% towards total national area as well as production.

Climatic requirements: Lentil requires cold climate during growth and warm temperature at the time of maturity. It can tolerate cold and frost winter up to great extent. The optimum temperature for growth is 18-30 degree centigrade. Excessive drought and/or high temperatures during the flowering and pod-fill period also reduce yields.

Soil: Lentil can be grown on a variety of soils such as light loams; alluvial soils and black cotton soils. This crop is also suited to the poorer types of soils, low lying areas such as paddy fields. Lentil does not tolerate flooded or waterlogged soils. Good drainage is required, because even short periods of exposure to waterlogged or flooded field conditions kill plants. A soil pH near 7.0 is best for lentil production. Acidic soils are not fit for growing lentil.

India ranks third after China and Canada in the world in production of edible oilseed crops. Average yield of rapeseed-mustard in the world is 2043 kg/ha. Average yield of European Union, Canada and China is higher than India. Higher yield in these countries is due to cultivation of long duration varieties suitable for their local climatic conditions. Duration of favorable climatic condition to grow rapeseed-mustard is shorter in India as compared to EU, Canada and China, which enforces cultivation of short duration varieties (130-145days). Rapeseed-mustard contribute one third in the production of edible oils in India. These crops ranks second in area and production after soybean. Total area and production under these crops is 5.80mh and 6.28mt respectively. It is necessary to mention that total water requirement of these crop is 80-240mm, which is very low as compared to other crops. These crops pay higher return by utilizing low inputs, thus, are highly remunerative for the farmers.

Rapeseed-mustard group of crops are mainly cultivated in irrigated areas where at least one irrigation facility is available and only 24.0% of area is under rain-fed situation. Five states of India namely, Rajasthan, Uttar Pradesh, Haryana, Madhya Pradesh and West Bengal contribute 82.00% and 85.67% in total area and production, respectively, under these crops. In Madhya Pradesh 53.2% of total area is irrigated with average yield of 1006 kg/ha, however, 76.6% of total area of country is irrigated even then average yield is only 1083 kg/ha. The lower average seed yield can be attributed to (i) cultivation of very short duration and low yielding B. rapa genotypes in Eastern and North-Eastern states; (ii) susceptibility of varieties to different pests; and (iii) high temperature stress at seedling and reproductive stage. Out of total area under these crops, Indian mustard (Brassica juncea) is grown over more than 80% area. Cultivation of Indian mustard has also been taken up in non-traditional areas of southern states of India viz., Karnataka, Tamilnadu and Andhra Pradesh, recently. This has become possible due to its higher average yield, tolerance against different biotic and abiotic stresses, availability of varieties with 100-152 days maturity, and non-shattering behaviour.

Rice is the most important cereal crop of India occupying about 44.0 million hectares land. It provides food and employment to millions of people in the country. Despite development of high yielding varieties and technological interventions the yield of rice is still low (3.20 tonnes/ha) in India. The reasons for low yield of rice are:

Lesser area under high yielding varieties

Limited availability of quality seed

Increased acidity/ sodicity in some parts of the country

Declined soil fertility

Unavailability of inputs, like fertilizers and seed, in time

Inefficient nutrient management including imbalanced use of nutrients

Improper crop rotations

Reduced availability of irrigation water

Inefficient management of weeds, diseases and insect-pests

Introduction

Agriculture occupies a prominent place in Indian economy and rural livelihoods. But, it is faced with the challenge of producing food for a rapidly growing population whilst maintaining the nation’s fragile resources.Efforts through green revolution brought out significant increase in food grain production by concentrating on the potential farms in terms of irrigation and other basic resources.Nationally and globally, it is necessary that the growth rate of food production must remain higher than the population growth rate to avoid hunger and overcome famines. But, food security one of the basic human rights is in jeopardy, today. Agriculture is crucial for ensuring the food and livelihood security of the country and hence it is important that this sector with diversified farming systems becomes resilient to increasing climatic variabilities and global economic changes. This concept encourages the farmers towards efficient utilization of natural resources and also proper channelization of by-products of one enterprise to the other enterprise in farming. The integrated farming systems, therefore, assume prime place for sound management of farm resources to enhance the farm productivity, reduce the environmental degradation, and improve the quality of life of resource poor farmers and to maintain the sustainability to meet the challenges of food security. In order to meet the soaring demand for food there is a need to go for integrated faming system.This approach facilitates in strengthening the socio-economic status of Indian farmers besides strengthening ecological balance. Integrated farming system is common to Indian farmers simply because of the preponderance of small farm systems which form the backbone of traditional agriculture. For small farmers, these systems enable a means of diversifying the use of meagre resources in the context of a rational means of reducing risk. Additionally, it also enables increased efficiency in the use of these same resources in a manner that there will be livelihood security and stability to farming systems. There is no scope for increasing the farm size. Yet steady increase in population with shrinkage of cultivated land as a result of industrialization and urbanization would pose serious hurdle for agricultural development. Only vertical expansion is possible by integrating appropriate farming components requiring lesser space and time ensuring continuous income to the farmers.

Microorganisms live as single cells in nature in association with other cells in assemblage that we call “Population”. Such populations are composed of group of related cells generally derived by successive cell divisions from a single parent cell. The location in an environment where a population generally lives in association with other populations of cells called “Microbial communities”. Environmental microbiology deals with the study of these microbial communities in different habitats, naturally occurring on earth.

Natural habitats of microorganisms are exceedingly diverse. Any habitat that is suitable for the growth of microorganisms can also support the growth of other microorganisms. But in addition, there are many habitats where, extreme environment, due to chemical and physical factors, higher organisms cannot grow but microorganisms can grow and flourish. In this chapter, different habitats of microorganisms are discussed briefly.

Because microorganisms are so small, their habitats are also small. The term microenvironment is often used in ecology to describe where a microorganism actually lives and metabolites within its habitat.

Development of sophisticated procedures for the isolation, manipulation and expression of genetic materials is a field called genetic engineering. Genetic engineering has applications in both basic and applied research. In basic research, genetic engineering techniques are used to study the mechanisms of gene replication and expression in prokaryotes, eukaryotes and viruses. For applied research, genetic engineering used for development of microbial cultures capable of producing valuable products such as human insulins, growth hormones, interferons, vaccines, enzymes etc. The commercial application of genetic engineering is sometimes referred as Biotechnology. In broad sense, Biotechnology refers the use of living organisms to carry out defined chemical processes for industrial application.

The process of isolation, purification and replication of specific DNA fragment is called molecular cloning or gene cloning. Molecular cloning is the base of most of the genetic engineering procedures. The purpose of molecular cloning is to isolate large quantity of specific genes in pure form. Thus molecular cloning is very important in genetic engineering and can be divided into several steps depends on the purpose. The steps are as follows:

The pathogenicity of an organism varies form mild attack to severe fatal attacks. The host has many mechanisms to resist or to avoid the pathogens apart from immune systems. One or few of these will be activated when the pathogen enters into the body. Following are some of the listed natural host defense mechanisms.

Industrial Microbiology is the discipline that uses micro organisms, usually grown on large scale, to produce commercial products or carry out important chemical transformations.

The products derived from such processes are

1 Alcohols and alcoholic beverages.
2 Production of pharmaceutical agents like antibiotics, vaccines etc.
3 Food additives
4 Enzymes
5 Chemicals
6 Single cell proteins

Genetics is the study of what genes are, how they carry information, how their information is expressed, and how they are replicated and passed to subsequent generations or other organisms.

DNA in cells exists as a double-stranded helix; the two strands are held together by hydrogen bonds between specific nitrogenous base pairs: A-T and C-G.

A gene is a segment of DNA, a sequence of nucleotides, that code for a functional product, usually a protein.

When a gene is expressed, DNA is transcribed to produce RNA; mRNA is then translated into proteins. This is also referred as Central Dogma of Life. The DNA in a cell is replicated before the cell divides, so each daughter cell receives the same genetic information.

Sterilization refers the complete removal or elimination of microorganisms from an environment. Physical and chemical agents are available to remove the microorganisms from the environment. Heat, irradiation and filtration are the three physical agents and various chemicals are available for sterilization.

Terms related to control of microorganisms

Cide or cidal means to kill the microorganism (Ex. Bactericidal refers the killing of bacteria).

Static or stasis means inactivation or inhibition, but not killing. They prevent multiplication of the organism. (Ex. Fungistatic refers the inhibition of growth of fungi.).

Sepsis refers break down of a living tissue by organisms and is accompanied by inflammation and pus formation.

Antispetic is an agent applied externally on living tissues to kill or inhibit the growth of the organisms.

Disinfectant is an agent applied externally on inanimate objects (not living tissues) to destroy harmful pathogens in their vegetative stage.

(Antiseptics are milder than disinfectants because to avoid the side effects)

Sanitation refers removal of organisms from a location by cleaning but not by sterilization.

The essential nutrients and their function in microbial cells

Virus can be defined as a genetic element containing either DNA or RNA that replicates in host cells as intracellular parasites but is characterized by having an extracellular state.

Virus can use the metabolic machinery of the host cell and can modify the genetics of the host cell. Virus has both extracellular and intracellular state.

Extracellular State

Outside the host cell, the virus is a minute particle containing nucleic acid surrounded by protein, which is referred as virions or virus particles. Virions are inert and have no biosynthetic and metabolic functions. Extracellular state or virus particle is the perfect stage of virus to study the morphology and chemistry.

Intracellular State

The active state in which the virus replicate in the host cell. When the virus nucleic acid is introduced to host cell and replication starts, the process is referred as infection. The cell in which infection of virus and replication takes place is referred as host cell.

Proto – first; Zoon – animal

Protozoa are single celled eukaryotic organisms, which lack cell wall and ability to move at some stage of their life cycle.

They are referred as the first animals.

There are about 65000 described species grouped into 7 phyla. Among them, 50 per cent are not available as living forms (as fossils) and out of remaining 50%, 22,000 species are free-living and 10,000 species are parasitic forms.

The protozoa are distinguished from other organisms by following characters

Algae are a large and diverse group of eukaryotic organisms that contain chlorophyll and carry out the oxygenic photosynthesis.

Study of algae is referred as phycology or algalogy

They vary from cyanobacteria or blue green algae by their eukaryotic nature.

Eukaryotic, spore – producing, achlorophyllous organisms with absorptive nutrition that generally reproduce both sexually and asexually and whose thallus is usually filamentous, branched somatic structures known as hyphae, typically surrounded with cell wall.

Mycology – Study of fungi

The fungi can be divided into two groups namely

True fungi: Chytridiomycota, Zygomycota, Ascomycota, Basidiomycota

Additional phyla: Myxomycota, Dictyosteliomycota, Acrasiomycota, Plasmodiophoromycota, Oomycota, Labyrinthulomycota, Hypochitridomycoya.

Size – Shapes - Arrangements – Morphology

Bacteria are very small, most being approximately 0.5 to 1.0 mm diameter. Smallest bacteria are Mycoplasmas, as small as 0.2 micrometers (almost as small as largest poxviruses).

Accepted wisdom is that bacteria are smaller than eukaryotes. But certain cyanobacteria are quite large; Oscillatoria cells are 7 micrometers diameter, size of red blood cells. And certain eukaryotes (e.g. Nanochlorum eukaryotum) are very small, only 1 to 2 micrometers, but true eukaryotes (nucleus, chloroplast, mitochondrion are present). So size difference is, like many generalizations, only a useful yardstick, not an absolute truth.

Epulopiscium fishelsoni, discovered in 1985 in intestinal tract of sturgeonfish, is an enormous, cigar-shaped cell, as large as 80 x 600 micrometers (that’s 0.6 mm, large enough to be seen by the naked eye). Amazingly, this cell is prokaryotic! Initial evidence by EM was hard to believe, but confirmed rRNA comparisons with other organisms, a cousin of Gram-positive Clostridium genus.

The relative size of the bacteria are as follows :

Place of Microorganisms in Living World

Haeckel’s kingdom Protista

E.H. Haeckel, 1866 proposed this concept. Apart from plant and animal kingdom, the third kingdom “Protista” was developed by him. The protista includes unicellular organisms that are typically neither plant nor animal. These organisms, the protists, include bacteria, algae, fungi and protozoa. Bacteria are referred as lower protists and others are called as higher protists.

Whittaker’s five kingdom concept

R.H.Whittaker (1969) proposed the concept of five kingdom. He divided the living things in to 5 kingdoms.

Microscope is an instrument to magnify and enable to see the microorganisms by us.

Microscopes are of two types. Light and Electron microscope.

Basic Principles of light microscope

The light is the primary source on which magnification is performed. The magnification is obtained by a system of optical lenses using light waves. These light microscopes can be further classified into

Obviously human have had to deal with microbes even before the recorded history. The first record of human using microorganisms comes from ancient tablets from mid east.

Babylonians were using yeast to make beer over 8000 years ago and acetic acid bacteria to make vinegar over 6000 years ago. About 5000 years ago, Persia (Now Iran) region recorded the wine making.

The Romans had God for specific microorganisms. The roman God of mold and mildew were “Robigus” and “Robigo” which mean crop rust. (Rust is one of the plant disease caused by fungus). God Robigus was very much feared because of crop lost. About 2000 years ago, Romans proposed that diseases were caused by tiny animals. But, fundamentalist religions had a strong hold over the progress. The real microbiology history starts from 1600s, when people began to make crude lenses and microscopes.

The following are the scientists and their role in the development of microbiology:

Microbiology

Study of microorganisms, a large and diverse group of microscopic organisms, that exist as single cell or cluster. It also includes virus, which are microscopic, but not cellular.

Development of Agriculture in the World and in India

Agricultural ecosystems will increasingly be called on to deliver food and fiber for a demanding and expanding global population. Until recently, increased production relied on expansion of the amount of land under cultivation and irrigation. Since World War II, production advances have relied on genetics and plant breeding, advances in fertilizer and pesticide use and improved cultural management (Matson et al., 1997). Since 1950, agriculture worldwide has expanded cereal production by an average of 2% per annum while population has increased by 1.9% per year (Borlaug and Dowswell, 1994).

Modern science-based agriculture had its beginnings in the late 19^th century with improved traction and tillage equipments. However, it was not until after World War II that the research findings that led to the modern-day productive systems in the United States and later in European and other developed countries. The expansion was directly related to the great demand for food to support the Allied war effort. Knowledge bases developed in plant genetics, physiology and pathology, along with a ten-fold increase in fertilizer use, advances in seed technology, weed control, irrigation and cultural methods allowed the development of the systems that dominate agriculture in many of the countries today. Corn or maize responded dramatically to the advances in production technology. Maize yield in the United States has increased more than 300 per cent over the past 50 years and continues to rise. Maize production technology has been delivered worldwide (Borlaug and Dowswell, 1994).

Agroecology : Agroecology can be defined broadly or narrowly. “Loosely defined, agroecology often incorporates ideas about a more environmentally and socially sensitive approach to agriculture, one that focuses not only on production, but also on the ecological sustainability of the productive system.

or

The science of applying ecological concepts and principles to the design and management of sustainable agroecosystems.

Alternative Farming/Alternative Agriculture : These are essentially synonymous terms encompassing a vast array of practices and enterprises, all of which are considered different from prevailing or conventional agricultural activities. “They include:

Agricultural practices in India remained virtually unchanged for over 2000 years till 1950-60. With technological advancement in medicine and improvement in health care services, population in India substantially increased in the post independence period. The result was that there was acute shortage of food during 1960s and India had to import massive quantities of wheat from USA to avert famine. Most of these food shipments were in the form of aid. It was then that Government of India realised the gravity of situation and invested heavily in agricultural research. Fortunately, during this period food research laboratories in the West developed hybrid varieties of seeds to suit various types of soil and climatic conditions. At the same time new types of fertilizers and pesticides were introduced which showed dramatic increase in the yield. The agricultural research laboratories in India were able to build on this research and provided extension services to adopt new agricultural techniques to farms in India. This led to dramatic improvement in agricultural production which was hailed as “Green Revolution”. Within two decades a country perennially deficient in food and subject to cyclic famines became a food surplus country in spite of the fact that there was a continuous rise in population which doubled in 30 years after independence. This trend continued into 1980’s when Government built huge buffer stocks of wheat and rice to meet the needs during lean production years.

However the momentum of Green Revolution could not be maintained and certain disturbing trends were noticed in 1990s. The growth rate in productivity declined from 2.99 per cent per annum to 1.21 per cent This was not because we had come to a technical plateau our yields of various products are still quite low as compared to those achieved by developed countries and even some of the developing countries.

Leisa

Sustainable agriculture is an important element of the overall effort to make human activities compatible with the demands of the earth’s eco-system. Thus, an understanding of the different approaches to ecological agriculture is necessary if we want to utilise the planet’s resources wisely.

While sustainable agriculture is based on long-term goals but not a specific set of farming practices, it is usually accompanied by a reduction of purchased inputs in favor of managing on-farm resources. A good example is reliance on biologically-fixed nitrogen from legumes versus manufactured nitrogen fertilizers. Low-input agriculture is one of several alternative farming systems whose methods are adaptable to sustainable agriculture.

Low-input farming is based on a reduction—but not necessarily elimination—of chemical fertilizers, insecticides, and herbicides. Farmers are adopting these practices primarily to reduce costs, but also because they want to minimize impact on the environment or because they perceive future pesticide regulations.

In a search for information on how to farm with fewer chemicals, it is helpful to examine alternative farming systems in existence that largely exclude chemicals in favor of biological farming practices. Experiences of producers who have successfully practiced these methods are valuable to farmers considering a transition to low-input sustainable agriculture.

Concept of Agro-ecology

Ecology and environment

The word environment is derived from the French verb environner, which means “encircle” or “surround”. Thus, our environment can be defined as the physical, chemical and biological world that surrounds us, as well as the complex of social and cultural conditions affecting an individual or community. This broad definition includes the natural world and the technological environment, as well as the cultural and social contexts that shape human lives.

The earth is the only known planet habited by man and other life forms, plants and vegetation. Man and nature have lived together and so long as man’s wants were in conformity with nature, there was no problem. But unfortunately, man’s ambition for limitless enjoyment and comfort has led him towards the exploitation of nature’s wealth so indiscriminately and so shamelessly as to reduce nature’s capacity for self stabilization. The indiscriminate exploitation of nature over centuries has created numerous environmental problems. Man’s voracious appetite for resources and his desire to conquer nature has put him on collision course with environment. The demands of his explosive technological society impose intense stress on the state of equilibrium with the environment.

Ecology is the branch of biological science concerned with the relationships and interactions between living organisms and their physical surroundings or environment. Living organisms and the environment with which they exchange materials and energy together make up an ecosystem, which is the basic unit of ecology. An ecosystem includes biotic components – the living plants and animals and abiotic components the air, water, minerals and soil that constitute the environment. A third and essential component of most natural ecosystems is energy, usually in the form of sunlight.

Familiar examples of land based or terrestrial ecosystems include forests, deserts, jungles and medows. Water based or aquatic ecosystems include streams, rivers, lakes, marshes and estuaries. There is no specific limitation on the size or boundaries of an ecosystem. A small pond can be studied as a separate ecosystem, as can a desert comprising hundreds of square kilometers. Even the entire surface of earth can be viewed as an ecosystem; the term biosphere is often used in this context.

Sustainable agriculture can be defined as a tool of using the natural resources for meeting the present needs without jeopardizing the future potential, increasing per capita productivity without causing degradation of soil and water resources, enhancing profitability without reducing total production and reducing excessive dependence on off farm inputs. Thus the holistic view of sustainability is an approach which is ecologically sound, economically profitable and socially equitable. Theoretically this is an ideal concept and of recent origin. But the real danger to sustainable agriculture stem from the compelling needs of increasing population for food, fuel, fodder on one hand and limited natural resource base of land and water on the other.

Characterisation of Natural Resources

The objective of food security can be met by promoting sustainable agricultural production systems. Increasing agricultural production should not be at the cost of degrading soil and depicting the water bodies. If the basic needs of people are to be met on a sustainable basis, the earth’s natural resource base must be conserved and enhanced. In other words, for food security and sustainable livelihoods, ecological security is necessary. Areas under ecological stress need attention, pressure on natural resources increases with population increase in order to fulfill the demand.