eChapters

Introduction

India was a self-sufficient nation in its food production before independence but after the occurrence of various famines, the government in late 1960s started focusing more on the crop production i.e.,green revolution (NAAS 2019). Use of hybrids, fertilizers and plant protection chemicals increased and major investments were made on irrigation structures which led to a massive jump in the production of crops. But with time, the negative externalities caused by green revolution were vividly noticeable. The indiscriminate use of chemicals has debilitated the environment by causing soil depletion, pollution, deforestation, climate change etc. thus affecting the health of human kind. The lofty prices of inputs led the farmers to resort to debt thus falling into debt trap and suicides. In order to address this problem an alternative to the conventional farming is required which is more sustainable and climate resilient. In the mid-1990s, natural farming viz., Zero Budget Natural Farming (ZBNF) was demonstrated by Sh. Subhash Palekar also known Subash Palekar Natural Farming (SPNF). It is an agroecology based diversified farming system which involves no financial outlay to purchase essential from outside and makes farming profitable. Mishra (2018) studied on Zero Budget Natural Farming (ZBNF) and found that crops grown under ZBNF evinced higher yield than the crops grown under non-ZBNF.

Introduction

Agriculture has historically been the primary source of income in India. It has the potential to alleviate poverty, increase income, and enhances food security for 80% of both the world’s poor and people who reside in rural areas primarily work in agriculture. One of the most effective strategies to eradicate extreme poverty, increase shared prosperity, and feed an estimated 9.7 billion people by 2050 is agricultural development. Compared to other modes, the agro - based sector’s progress is two to four times more successful in enhancing the earnings of the poorest people (www.worldbank.org).

Nearly 5 billion hectares, or 38% of the world’s land surface, is used for agriculture. Around one of this is devoted for farming, and the remaining two thirds are pastures and meadows for grazing animals. Over 10% of cropland is assigned to permanent crops like cocoa plantations, oil palm plantations, and fruit tree orchards. Yet another 21% of land is primed for irrigation, a crucial agricultural land management technique.

Introduction

India has one of the world’s largest agricultural production areas of land. The net sown area is 140.1 million hectares, the net irrigated area is 49% of this, which is 68.4 million ha as per 2014–15 land-use statistics (Agriculture Research Data Book 2019). While the proportion of Indians employed in agriculture is decreasing, agriculture, along with its allied sectors such as livestock, forestry and fisheries, remains India’s primary source of income. As per the Lok Sabha Standing Committee on Agriculture (2019–20), agriculture and allied industries employed 54.6 percent of India’s total workforce. Approximately 70% of rural households still rely primarily on agriculture for a living. Agriculture and allied sectors’ share of the country’s Gross Value Added (the value of goods and services produced in an area, industry, or sector of an economy) has fallen from 18.2 percent in 2014-15 to 16.5 percent in 2019-20. As per current trends, 60% of India’s population (more than 10% of the world’s population) will face severe food shortages by 2050.

Investment Appraisal Techniques

A financial evaluation/ appraisal of Project considers the possible compensations of completing the Project against the anticipated expenses. The assessment of the project will rely on several factors, including the Size of the project, time span of project etc. The motivation behind the financial evaluation is to decide if the project is advantageous, contrasting its expenses and its expected normal advantages. These methods are primarily designed to evaluate the effectiveness of a new project. This investment evaluation technique includes Payback Period, Internal Rate of Return (IRR), Net Present Value (NPV), Accounting Rate of return (ARR), Profitability index etc. Each of these techniques evaluates the project from various angles and provides very useful insights. Investment appraisal techniques are divided in two parts namely, discounted cash flow methods and non-discounted cash flow methods.

Non-Discounted Cash Flow Techniques

Future cash flows are not brought to their Present value through Non-Discounted Cash flow methods. Non-Discounted Cash flow methods are also categorized into the following two techniques.

Project Implementation

Project Implementation is the process of putting a project plan into action. It takes place after the planning phase; planning phase includes key objectives, timeline and budget of the project. Execution includes organizing resources and assessing performance to guarantee the project stays within its anticipated scope and budget. It also involves handling any unforeseen issues in a way that keeps a project running smoothly.

Steps for Project Implementation

1. Assess the Project Plan: Before implementing the project, it is essential to create a plan that satisfies the expectations of the management, customers, and other stakeholders. The project manager must assess the project plan and guarantee that all team members comprehend the project and its requirements. The project manager must define the roles and the time required to complete each role. This step sets the standard for cooperation at work.

2. Execute the Plan: At this stage, the real work on the project begins. The project manager regularly discusses progress with his team. It measures progress along a timeline and tracks resource usage.

3. Make required Changes: Sometimes, during the implementation of the project, the manager has to make changes at the request of the customers or in other situations. Make these changes as needed, based on the design plan for solutions. Continue to interact with the team and ask questions to determine areas where they need more support.

4. Examine Project Data: It is crucial to gather and evaluate data throughout the execution phase of the project to assess the advancement of the project in comparison to its initial plan. Now, the day manager can use many project management software and information technology to collect and analyze real time data.

5. Assess the Feedback: After the conclusion of the project, it is crucial to gather feedback regarding the project outcomes from the clients, the project team and other stakeholders. This assists in determining the number of activities in the project that were executed as intended and aspects that require enhancement moving forward.

Project Report

A project report is a written document associated with every investment. It includes the details upon which the project was evaluated and deemed viable. It encompasses information regarding economic, technical, financial, management, and production elements. It assists the entrepreneur in understanding the interests and aids in securing loans from banks or financial institutions.

The project report provides comprehensive details on the necessary land and buildings, yearly production capacity, production methodology, machinery and equipment along with their costs and technical specifications, raw material needs, electricity and water requirements, labor needs, market costs of the project, production, financial analyses, and the financial viability of the project.

Contents of a Project Report

1. General Information: The project report needs to incorporate details regarding the industry relevant to the project. It ought to present information about the industry’s historical background, present condition, challenges, and future outlook. It must include details about the product to be created and the rationale behind the product selection if the proposed organization is a manufacturing entity. It should indicate the demand for the product in local, national, and international markets. It should distinctly outline the business opportunities and provide explanations for initiating the business.

1. ‘Agrostoogical’ refers to cultivation of_____________. (Grasses)
2. Land on which the potential plant community is composed periodically of native grass, forbs and shrubs valuable for forage and in sufficient quantity to justifying grazing use is called as_____________. (Rangeland)
3. The basic object of range management is to_____________ and_____________ the rangeland for higher production of fodder, rich in nutritive value and palatability. (Improve & maintain)
4. ICAR had carried a grassland survey of India in 1954 by Wnyte, Venkatramanan and Dabadghao had found_____________ types of grass land in different environment. (8)
5. The main reason for the enormous increase in livestock population is_____________. (Social attitude of the people)
6. All the vegetation consumed by grazing animals including fruits and twigs of trees and shrubs is called_____________. (Pasturage & forage)
7. The practice by which the gap can be bridged between the requirement and availability of animal feeds and fodder is known as_____________. (Grass land techniques)
8. The scientists_____________ have recognised five type of grass covers in India. (Dabadghao & Shankar Narayan, 1979)
9. The maximum area of about 2.8 milloin square kilometre is covered under_____________ type of grassland in India. (Phragmites Saccharum type)

1. An imaginary line joining the points of equal elevation on the surface of the earth represents_____________. (Contour lines)
2. The vertical distance between consecutive contours lines is called_____________. (Contour interval)
3. When measured with a compass, the line of sight that run midway between due North and due West has a bearing of_____________. (N 45 degree W)
4. A survey of a large area which consider the earth’s curvature is called a _____________ survey. (Geodetic)
5. The distinctive feature of topographic maps is the_____________ of the land. (Shape or Contour)
6. The colour used to depict fence lines and important roads on a topographic map is _____________ and_____________. (Red and black)
7. A surveyor’s chain is divided into links and each link is_____________ long. (0.66 feet)
8. A body of water on a topographic map is presented by_____________ colour. (Blue)
9. On a topographic map a ploughed field would be sown as_____________ colour. (White)

Aquaculture, the cultivation of aquatic organisms such as fish, shellfish, and seaweed, has grown exponentially in recent decades due to overfishing and the increasing demand for seafood. This chapter provides a comprehensive overview of aquaculture practices, including its methods, species, and technological advancements. It also delves into the environmental impacts associated with aquaculture, both positive and negative. Key issues such as habitat destruction, water pollution, genetic diversity, and using wild fish for feed are discussed, along with mitigation strategies and sustainable practices. The chapter concludes with a discussion on policy frameworks and future directions for minimizing the environmental footprint of aquaculture while maximizing its potential to contribute to global food security.

1. Introduction

Aquaculture, or the farming of aquatic organisms, has become a significant component of the global food system. It encompasses the breeding, rearing, and harvesting of fish, shellfish, algae, and other aquatic organisms in various aquatic environments including freshwater, brackish water, and marine water. Aquaculture's rapid expansion has been driven by the decline in wild fish stocks due to overfishing, as well as the growing global population and increased per capita consumption of seafood (FAO, 2020).

Precision fisheries, a concept adapted from precision agriculture, involves the application of advanced technologies and data-driven approaches to optimize fishing operations and resource management. This chapter explores the potential of precision fisheries as the future of fishing, offering benefits such as increased efficiency, reduced environmental impact, and improved sustainability. By integrating cutting-edge technologies such as remote sensing, GIS (Geographic Information Systems), IoT (Internet of Things), and machine learning, precision fisheries aim to enhance decision-making, maximize yield, and minimize resource wastage. The chapter discusses key components of precision fisheries, including real-time monitoring, predictive modeling, and targeted harvesting, and examines their implications for the fishing industry, ecosystems, and coastal communities. Furthermore, the chapter highlights challenges and opportunities associated with the adoption of precision fisheries and provides recommendations for policymakers, researchers, and stakeholders to harness its full potential for sustainable fisheries management and food security.

The Indian farm women have extensive workloads with triple responsibility for farm, household and community. Gradually their work is becoming harder due to climate change, degradation of natural resources, natural calamities, male migration and changing agricultural technologies. Women are extensively involved in crop production, horticulture, livestock management, post harvest operation, fisheries, agroforestry and household activities. Majority of their time is devoted towards collection of fuel, fodder and water, growing vegetables in homestead and rearing backyard poultry. They also considerably contribute for household income as agriculture wage earners and through cottage industry.

Women play a significant and crucial role in agricultural development and allied fields. The nature and extent of women’s involvement in agriculture varies greatly from region to region. But regardless of these variations, women are actively involved in various agricultural activities.

As per Census 2011, out of total female main workers, 55 per cent were agricultural labourers and 24 per cent were cultivators. However, only 12.8 per cent of the operational holdings were owned by women, which reflect the gender disparity in ownership of landholdings in agriculture. Moreover, there is concentration of operational holdings (25.7 per cent) by women in the marginal and small holdings categories. Worker Population Ratio (WPR) of women (24 %) is lower as against men (54.4 %) in the country. The workforce participation rate for rural females is higher at 30.5 percent against urban women participation rate of 20.20 percent (Mo SPI, 2022-23). As per the Annual Periodic Labour Force Survey (PLFS) Report 2022-23, agriculture had the highest estimated percentage distribution of female workers, ie. 64.3 %, with 76.2 % in rural areas and 11.7 % in urban areas.

Climate change significantly impacts agriculture, altering growing conditions, crop yields, and the livelihoods of farmers. Rising temperatures and shifting precipitation patterns can lead to more frequent and intense droughts, floods, and storms, which disrupt planting and harvesting schedules and reduce crop productivity. Changes in temperature and precipitation can also exacerbate pest and disease pressures, making it harder for farmers to protect their crops. Additionally, the increased frequency of extreme weather events can damage infrastructure and soil health, further challenging agricultural systems. These effects pose serious threats to food security, necessitating the development of climate-resilient farming practices and crop varieties, as well as policies that support sustainable agricultural development and climate adaptation.

The climate change is not “gender neutral”. Women and girls experience the greatest impacts of climate change, which amplifies existing gender inequalities and poses unique threats to their livelihoods, health, and safety.

Climate change effect on women

1. Reduced Agricultural Productivity: Climate change leads to crop failures, reduced yields, and changed growing seasons, affecting women’s income and food security.

2. Increased Water Scarcity: Changes in precipitation patterns and increased evaporation lead to water scarcity, forcing women to travel farther for water, reducing their time for other activities.

3. Soil Erosion and Degradation: Flooding and erosion caused by climate change degrade soil quality, reducing fertility and affecting crop growth, further threatening women’s livelihoods.

Classification of market

There are several bases on which markets are classified.

a. On the basis of location

On the basis of the place of location or operation, markets are of the following types:

Village market

A market which is located in a small village, where major transactions take place among the buyers and sellers of a village, is called a village market.

Primary markets

• These markets are located in big towns near the centres of production of commodities. In these markets, a major part of the produce is brought for sale by the producer-farmers themselves. Transactions in these markets usually take place between the producers/farmers and traders.

Export and import- an overview

The major thrust of livestock development strategy in India has been on achieving self-sufficiency in livestock products through import substitution. Several initiatives were taken to develop the Indian livestock sector in the past and India emerged as the largest milk producer in the world and it is also one of the largest producers of other livestock commodities. However, the economic policy reforms and economic liberalization triggered in 1991 have widened market opportunities for the livestock sector. The global demand for livestock products is also on the rise. Such developments offer an opportunity for India to increase its livestock exports, especially for products like bovine meat, whose domestic demand is low. With improved domestic production and marketing efficiency, better access to expanding world market, India has the potential to become more competitive and may augment port of livestock products. The export and import details reveal that there has been a steady increase in the value of imports and exports of livestock and livestock products in India.

Theories of entrepreneurship
1. An economic theory
2. Leibensteon’s X-efficiency theory
3. Dynamic entrepreneurship innovation theory
4. Harvard School theory
5. Theory of high achievement
6. Theory of change
7. Theory of profit
8. Theory of adjustment of price
9. Theory of market
10. Theory of social change
11. Theory of entrepreneurial supply
12. Theory of personal resourcefulness
13. Theory of cultural values 

Scheme

The needy livestock farmer visits the banks in the local area and enquire with the bank manager about the livestock projects and after having discussion with him, he visits the technical expert. A scheme can be prepared by a beneficiary after consulting local technical persons of State animal husbandry department, DRDA, SLPP, etc. livestock co-operative society/union/federation/commercial livestock farmers. If possible, the beneficiaries should also visit progressive livestock farmers and government/military/agricultural university livestock farm in the vicinity and discuss the profitability of livestock farming. A good practical training and experience in livestock farming will be highly desirable. The livestock co-operative societies established in the villages as a result of efforts by the Livestock Development Department of State Government and National Livestock Development Board would provide all supporting facilities particularly marketing of fluid milk. Nearness of livestock farm to such a society, veterinary aid centre, artificial insemination centre should be ensured. There is a good demand for milk, if the livestock farm is located near urban centre. The scheme should include information on land, livestock markets, availability of water, feeds, fodders, veterinary aid, breeding facilities, marketing aspects, training facilities, experience of the farmer and the type of assistance available from State Government, livestock society/union/federation.

Procurement is acquisition of goods and services.
Procurement includes:
• Planning the acquisition
• Planning the contracting
• Requesting proposals 
• Selecting a vendor
• Administering the contract
• Closing the contract 

Planning the acquisition

It is based on goals of an enterprise acquisition varies – depends on what, when and where to produce. Based on these factors acquisition requirements are arrived.

Introduction

In the face of a burgeoning global population, the imperative for robust advancements in food production, especially within the aquaculture industry, is more pressing than ever. The expansion of this industry necessitates a nuanced consideration of environmental, economic, and social factors underpinned by a commitment to sustainable development. However, the intensification of aquaculture, particularly in coastal regions, poses long-term environmental risks due to increased organic matter in water, demanding innovative solutions.

In recent decades, recirculating systems have emerged as a step toward sustainable aquaculture, offering an effective approach to control wastewater. High operating costs have hindered widespread adoption despite their potential, particularly in developing countries. Enter the need for a game-changing, cost effective, and environmentally friendly technology that resonates with farmers on a large scale. This is where the Biofloc system, or Biofloc technology (BFT), takes center stage. A beacon of cost-effectiveness, sustainability, and environmental friendliness, the BFT reduces water exchange to almost zero and slashes artificial feeding ratios. This revolutionary system enhances water quality and generates microbial protein for aquatic species, addressing critical challenges faced by the aquaculture industry.

Introduction

India has a coastline of 8,118 km, with an exclusive economic zone (EEZ) of 2.02 million sq km and a continental shelf area of 3,72,424 km², spread across 9 maritime States and seven Union Territories, including the islands of Andaman and Nicobar, and Lakshadweep. India represents 2.5 percent of the world’s landmass and supports a population of over one billion people. India is also one of 17 mega-biodiverse countries in the world, with 7.8% of the recorded species of the world, including 45,500 recorded species of plants and 91,000 recorded species of animals. The marine ecosystem is extremely diverse, attributed to the geomorphologic and climatic variations along the coast. The coastal and marine habitat includes near shore, gulf waters, creeks, tidal flats, mud flats, coastal dunes, mangroves, marshes, wetlands, seaweed and sea grass beds, deltaic plains, estuaries, lagoons and coral reefs.

Importance of Study

The detailed studies on the coastal and marine biodiversity of the Indian mainland are lacking, and so these habitats and the biodiversity are represented poorly. It is obvious that the biodiversity is distributed widely among different associated habitats and conserving a single area would never support all the important species and ecological processes worth protecting. Furthermore, biodiversity can only be conserved by preventing habitat loss and by restoration. The importance of any single species in the functioning of an ecosystem may not be high, but protection of a mosaic of habitats will certainly preserve diversity among the species of conservation importance. Also, to achieve the Biodiversity Aichi Targets with reference to the marine environment are to preserve ecologically sensitive areas and maintain the health of the marine environment by protection, sustainable use and conservation of marine living resources.

Introduction

Aquaculture stands as the swiftest expanding sector within the food industry, with an escalating per capita consumption of fish-derived animal protein. India, as the world's third-largest fish producer, contributes significantly to this trend, boasting a fish production of 16.24 million tons, which corresponds to 8% of the global fish production. Nevertheless, several challenges persist and must be addressed, including the absence of species-specific or functional feeds, the dearth of genetically modified strains or breeds, the availability of high-quality fish species, and the rising incidence of fish diseases. Recent strides in "omics" technologies have furnished a potent toolkit and conceptual framework that enables the comprehensive dissection of the phenotypic and functional networks of genes and proteins within cells or organisms (Mohanty et al., 2019). This innovative research domain has spawned technological advancements that harness the power of "omics" to scrutinize diverse biological systems (Ning and Lo, 2010). The integration of "omics" in aquaculture research has effectively surmounted numerous challenges related to production and reproduction, thereby ensuring its relevance and economic viability. This technology empowers researchers to analyze an array of molecules on a massive scale, marking an early and groundbreaking technological leap forward in this field.

Introduction

Aquaculture, involving the cultivation of fish, crustaceans, molluscs, and aquatic plants, has become indispensable for global food security and employment. However, the intensification of aquaculture practices, characterized by high stocking densities, has led to increased stress among farmed organisms, which in turn makes them more susceptible to diseases. Disease outbreaks in aquaculture can have devastating effects, necessitating both prophylactic and therapeutic measures to maintain the health and productivity of these organisms.

Prophylactic measures, such as vaccines and immunostimulants, play a vital role in preventing disease outbreaks. For instance, vaccines targeting common bacterial pathogens like Aeromonas hydrophila are widely used in fish farming. Immunostimulants like beta-glucans are also administered to enhance the immune response of aquatic organisms. On the therapeutic front, antibiotics remain the most commonly used agents to treat infections once they occur. However, the extensive use of antibiotics has led to several significant issues. Firstly, antimicrobial resistance (AMR) has emerged as a major concern, with the excessive use of antibiotics in aquaculture contributing to the development of resistant bacterial strains. These resistant pathogens can spread to other aquatic organisms and humans, posing a serious public health risk. Secondly, the presence of antibiotic residues in seafood can lead to export rejections, as many countries enforce strict regulations on such residues. This can result in considerable economic losses for aquaculture producers. Lastly, residual antibiotics in seafood can cause allergic reactions in consumers and contribute to the emergence of antibiotic-resistant infections.

Introduction

The global food system is anticipated to supply safe and nutritious food to a population that is expected to increase from 7.5 billion now to approximately 10 billion by 2050. Not only will there be more mouths to feed, but as incomes rise in rising and developing nations, demand for meat, fish, and dairy will rise as well (Brooks et al., 2019). Demand for agricultural commodities is rising rapidly as the world's population grows. Agriculture’s deep connections to the world economy, human societies, and biodiversity make it one of the most important frontiers for conservation around the globe (world wildlife).

Today's connected world has given entrepreneurs millions of new places to start small businesses, and the Internet has a lot of information to help them. Also, the internet has made it easier for business owners to connect with their peers, learn from their mistakes, and use their good decisions as a guide for their paths.

Introduction

Farmers Producer Organisations are associations of farmers and other rural producers formed based on membership to advance the members' common interests, engage in mutually beneficial technical and economic activities, and foster and sustain relationships with other organisations active in the same economic and institutional sphere. Farmer Producer Organisations (FPO) are a way for farmers, especially those on the margins of the industry, to band together and establish a strong front against the myriad problems plaguing the agricultural sector, including a lack of capital, knowledge, and access to markets. To better organise farmers, increase their ability to pool their resources, and increase their competitive edge in the marketplace, the Indian government's Department of Agriculture and Cooperation (DAC) has determined that Farmer Producer Organisations incorporated under the Companies Act, 1956 are the best vehicle for doing so.

Background

More than 85% of India's 12.5 million agricultural households are classified as small and marginal farmers because they own less than two hectares of land. Every farmer, on average, owns 1.33 hectares of land. For farmers, investing in cutting-edge farming techniques and high-yielding inputs like seeds and fertiliser is simply not feasible in the current economic climate. They also don't make much money off their marketable surplus when they sell it off piece by piece. One strategy for farmers to reduce the cost of inputs and increase their bargaining position in the marketplace is to form Farmer Producer Organisations (FPOs).

Introduction

India is the largest banana producer in the world. They grow bananas on an area of 9 million hectares and get 36 MT per hectare. India exported 2,000,000 MT of banana worth $1 billion to other nations. The banana production system supports the labour market, alternative food system, export eco-system, and nutritional security, among other things. The development of climate-resilient banana varieties, tissue culture protocols, macro-propagation, ornamental bananas, micronutrient mixtures, site-specific nutrient management, biocontrol agents for pest and disease control, robust virus diagnostic kits, and so on are all highly recommended and encouraged to make the banana industry sustainable and profitable in the long run. Technologies and products for use after harvest are also vital. Branding, supporting entrepreneurship via incubation platforms, marketing intelligence, and handholding for technical support are necessary to sustain banana production and drive value addition. Bananas and plantains, more than any other fruit or vegetable, constitute a staple food for millions of people worldwide and contribute to a healthy diet. In addition to carbohydrates, it's a wonderful source of potassium, vitamins, and minerals. The fat-free fruit has a calorie count of 90 per 100 grams. Dessert bananas are normally eaten raw, while plantains or cooking bananas are commonly prepared in a variety of savoury ways, such as boiling, steaming, frying, or roasting. The banana industry has expanded in recent years, making a greater contribution to the economy in terms of both employment and food supply.

Most of ultrasound machines are designed for imaging with a particular resolution linear and convex transducers. These machines can be used for general purpose for abdominal, obstetrics, gynecological, small parts, urology and cardiac applications. Most of the machines have standard measurement software viz. distance, area, volume, circumference, and obstetrical gestational age measurement for BPD, HC, AC, FL, GS, CRL, AD and FW.

Assessment of probes: One should examine the probe whether it is linear array or curved (convex) array. The probe should also be checked for its frequency. These days multi-frequency probes are supplied with the ultrasound-machine. These multiple frequencies could be 2.0 to 5.0 MHz with centrally fixed frequency of 3.5 MHz. The frequencies could be 4.0 to 7.0 (5.0 MHz setting), 5.0 to 9.0 MHz (7.5 MHz setting). The area and depth covered by various frequencies should be known.

Before setting the ultrasound machine, one should make sure of all the auxiliary devices for the machines. These are Thermal video printer, Ultrasound gel, Biopsy needle, image saving devices (USB device or internal saving mechanism), wire, Uninterrupted Power Supply etc.

Identifying and knowing the main system: One should note down the name and model of ultrasound machine as these are quoted in all the documents published with the ultrascan images generated on that particular machine. It is written on one side of front panel. On the front panel, there are various knobs for proper setting. One should locate the auxiliary power switch of the machine to begin with. Generally, there is power indicator on the machine that shows light on when power button is pushed to on position. The auxiliary power switch may also have indications of its ON and OFF positions, may be marked with 0 and 1 or other symbols. As shown in the figure below, there are various operating buttons on the operating panel. These might vary from Machine to Machine.

Failure to accurately diagnose ovarian function is said to be one of the reason for poor reproductive efficiency in this species. The information regarding ovarian function can be gathered either by observing the reproductive behavior of the animal, status of reproductive hormones or palpation of ovaries per rectum for the presence of cyclic or pathological structures. However, due to poor expression of estrus signs behavioral observations poorly reflect the accurate information about ovarian function in buffaloes. Similarly, palpation per rectum does not provide reliable diagnosis since the CL is frequently embedded deep in the ovarian stroma of buffalo ovary and findings vary due to its subjective nature. Furthermore, measurement of hormones requires sophisticated laboratory procedures/ instruments for making a correct diagnosis. Therefore, real time ultrasonic examination is a better alternative to ascertain reproductive status of buffaloes and for devising suitable strategies to optimize fertility of this species (Sharma, 2003). However, it is important to mention that information gained from ultrasound must be used in conjunction with reproductive history of the animal, palpation of genital tract, and other diagnostic procedures rather than in isolation.

Ultrasonography has an importance place in human practice and veterinary f ield especially in canine practice. Since many years two dimensional ultrasound has been used for scanning purposes both in human and animal practice. But the scenario has changed in human practice with development of three dimensional technology and later four dimensional ultrasonography has developed which shows movements of the objects being scanned especially in the case of fetuses. Nowadays it has been common to use these advanced technology in the human practices. Yet these technologies are in the childhood stage in the veterinary field. High cost of 3D/4D ultrasound equipment, operational difficulties in non sedated animals & lack of specific knowledge about the operation of volume scanning hinder the use of this technology in the veterinary field. Better understanding of the different application of these technologies can be made to use in research areas for the better understanding of the abnormalities, post therapeutics as well in the diagnosis of the diseases

Principle of Three Dimensional and Four Dimensional Ultrasonography

Sound waves of frequency higher than human audible frequency usually ranges from 2-13 MHz are used in ultrasonography. Depending upon on depth of tissue from the scanning surfaces frequency is selected. Three dimensional ultrasonography gives three dimensional images of the volume being scanned .it works on the same principle of 2D ultrasonography but ultrasonographic beams are sent different angles to get three dimensional image of object being scanned. Volume information is obtained either directly using 2D array probe or by reconstructing three dimensional volume from a series of continuous or non- continuous 2D images by using software (Fenster and Downey, 2000). An advancement of 3D technology is 4D ultrasound. Four dimensional ultrasound adds the fourth dimension as time and gives a dynamic real-time 3Dultrasonography of the concerned organ with a continuous volume image acquisitioned rendering process. (Khurana and Dahiya, 2004).

The ultrasonography is based on echo-principal i.e. reflection of sound waves. The ultrasound waves, commonly termed as ultrasound beam is generated from the pizzo-electric crystals, under electric stimulation. The sound beam travels and strike to the organs/tissues on its way and get either reflected or reabsorbed by these structures. The reflected beam is received back by the transducer, which are processed and displayed on the monitor of ultrasound scanner. The display of signal is in form of shades of grey scale i.e. from bright to black picture. If these sound beams strike to organ such as bone, then major part of the beam is reflected and it appears bright (white) on screen. If the sound waves strike to fluid, these get absorbed and are not reflected back, therefore, the image of fluid appears as black on the screen. Other organs appear in between black and bright white. In fact, the reflected sound beam is not proportionate to frequency and velocity of emitted ultrasound beam. The strength of ultrasound beam (grey scale) or brightness of the image depends upon the acoustic impedance of organ or tissue. In simple term acoustic impedance is the capacity of tissue or organ to reflect or absorb these sound beams that again depends upon density or composition of these structures. The reflection of sound beams also depends upon, the angle at which the ultrasound beam strikes the structure on its way. The distance of the organ from the transducer also affects image brightness.

Ultrasonography in goat is becoming popular in the field of reproduction and replacing the other old-age techniques, viz. abdominal ballotment, recto- abdominal probes, X-rays and radioimmuno-assays. The reasons are numerous such as unsatisfactory results, hazardous effects to animal, operator or environment, high cost, long delay in diagnostic results and requirement of sophisticated labs. The ultrasound system has low operating cost and does not need special labs as it can be done at farm itself. Ultrasonography is considered safe to the animal and the operator and provides quick and reliable results. The popular opinion about ultrasonography is that it is noninvasive imaging system and is rapid, safe and practical means of diagnosis of pregnancy and reproductive disorders in sheep and goat. The B-mode real time ultrasonographic system particularly portable system is popular among researcher and practitioners. In goat, B-mode real time ultrasonography was used in 1971, using 5 MHz frequency transducer. A transducer of switchable frequency from 7.5 to 5.0 is more popular in small ruminant research and practice.

Aluminium is a ubiquitous metal and seen in an environment. Source of aluminium happens through dietary souce, food addivitives, packing materials, medications, environmental exposure as well as occupational exposure. Toxico kinetics is related to the interaction of aluminium with biological systems and toxicity also. Toxico dynamics of aluminium is related to the the oxidatve stress, neuro toxicity and bone toxicity. Diagnosis is based on MRI scan and measurement of serum as well as urine. Treatment is dependent on chelation therapy as well as avoidance of exposure. Finally it is concluded that aluminium toxicity leads to health risks in a significant manner along with potential adverse effects on neurological, gastro, intestinal, renal as well as skeletal systems.

Introduction

Aluminium is a ubiquitous metal observed naturally in the environment. It is widely used in various industrial and consumer products including cookware antacids, vaccines, and food additives. While aluminium is normally considered safe in low concentrations and exposure to high levels can lead to toxicity causing a range of adverse effects on human health. In this comprehensive article, authors will provide information regarding its toxicokinetics and toxicodynamics, clinical signs and symptoms, associated lesions, diagnosis and treatment strategies.

Cadmium, a roxic heavy metal, poses risk in a significant manner especially to human health and the environment. It's wide spread industrial use and presence in various products make exposure a concern particularly for both environmental and occupational settings. Understanding the source, toxico dynamics, toxico kinetics, clinical manifestations, diagnosis as well as treatment of cadmium poisoning is critical in mitigating it's adverse effects especially on human health. Cadmium gains an entry into the environment through natural processes namely volcanic activity as well as weathering of rocks. Whatever it may be, human activities along with mining, smelting, refining of metals and manufacturing of batteries, plastics as well as pigments, are major contributors to cadmium release especially into the environment. Additionally, cadmium is seen in tobacco smoke, resulting in exposure among smokers as well as passive smokers. Once released into the environment, cadmium gains entry into the human body through many routes such as inhalation, ingestion and dermal contact An inhalation of cadmium containing dust or fumes is a prominent route of exposure in an occupational settings especially in industries namely mining, smelting as well as welding. The consumption of contaminated water and food is another general route of exposure especially for the general population. After consumption, cadmium in essential manner accumulates especially in the kidneys as well as liver with a half life of approximately 10 - 30 years in the organs. It also accumulates particularly in bones, where it consists of half life of several decades.