eChapters

Tomato, the ‘Apple of Love’ or ‘Golden Apple’ is one of the most popular, widely grown and highly praised vegetable in the world. In India, commonly referred as ‘Poor Man’s Orange’, has wider coverage in comparison to other vegetables. Tomato universally treated as ‘Protective Food’, is eaten raw or cooked or in processed form (soup, juice, ketchup, puree, paste and powder, green tomato - pickles and preserves) or it supplies vitamin C and adds variety of colours and flavours to food. It is a very good source of income to small and marginal farmers and contributes to nutrition of consumers. Tomato seed contains 24% oil used as salad oil and in manufacture of margarine. By virtue of its many attributes, it is considered as a favourite crop for research in physiology and cytogenetics, all over the world. Tomato is also rich in medicinal value. The pulp and juice are digestible, mild aperient, a promoter of gastric secretion and blood purifier. Tomato, a primary source of lycopene, showed significant association with low prostate cancer risk and cancers of digestive tract. It is one of the best vegetables which keeps our stomach and intestine in good condition. Tomato juice has become an exceedingly popular appetizer and beverage.

Coriander is used by man since long as coriander seeds were found in Egyptian tombs of 960 BC. Further, Persia grew coriander 3,000 years ago and it added fragrance to Hanging Gardens of Babylon. In 3^rd century BC, Romans also found coriander seed as an excellent seasoning for popular foods.

Besides seeds, fresh leaves are being used for garnishing of food in many Latin American, Spanish, Russian, Chinese and Indian dishes since long. Fresh coriander leaves are also known as Chinese Parsely. In India, coriander seed is used almost daily in scores of curries for flavouring and leaves for garnishing. Coriander is a native of Mediterranean region.

Introduction and History

Leguminosae/Fabaceae is a superfamily of dicotyledonous plants, which in species diversity is the third largest family of plants accounting for 5% of Earth’s plant biodiversity and make up for more than at least 1% of the total Earth plant biomass. Among these, legume grains and pulses having more than 20 to 30% lysine protein content are cultivated in 145 million ha of land in developing countries. This family is also characterized by presence of specialized tumor like structure formation (nodules) on roots (occasionally on stem as in Sesbania rostrata, Aeschynomene) that is inhabited by microsymbiont gram-negative bacteria (Rhizobium), engaged in fixing atmospheric nitrogen or symbiotic biological nitrogen fixation.

Climate change and variability are concerns of humankind. The recurrent drought and desertification threaten seriously the livelihood of over 1.2 billion people who depend on land for most of their needs. The global economy has adversely been influenced due to droughts and floods, cold and heat waves, forest fires, landslips and mudslips, icestorms, duststorms, hailstorms, thunder clouds associated with lightning and the sea level rise (Fig. 1). The year 1998 was the warmest and declared as the weather related disaster year, which caused hurricane havoc in Central America and floods in China, India and Bangladesh. Canada and New England in the U.S suffered heavily due to icestorm in January while Turkey, Argentina and Paraguay with floods in June 1998. In contrast, huge crop losses were noticed in Maharashtra (India) due to unseasonal and poor distribution of rainfall during 1997-98. The 1997/1998 El Nino event, the strongest of the last century affected 110 million people and costed the global economy nearly US$ 100 billion. A string of 16 consecutive months saw record high global mean temperature in 1997-98.

Abstract

Leadership behavior is seen in every group of social animals like elephant, honey bee, human being, etc. Initially people thought this behavior as inborn character and only few lucky people possessed it. But now it has been proved that this character can be developed by interested people through systematic training. In every family parent are playing the role of either leader or manager and being a role model gradually transmitting this behavior to their children from childhood itself. Training begins at home of every successful leader.  In this article the characteristic features of leaders, style of their functioning, leadership theories and the difference between a leader and a manager are discussed in details. Important tips have been mentioned to follow for becoming a good and successful leader.

The potential value of any feed for supplying a particular nutrient can be determined by chemical analysis but the actual value of the feed to the animal can arrived at only after making allowances for inevitable losses that occur during digestion, absorption and metabolism. The first tax imposed on feed is that represented by the part of it which is not absorbed and excreted in the feces.

This may be defined as the factor present in feeds/ fodders or trees leaves and impair some aspects of animal metabolism, produce adverse biological effect in animal production. These are referred mostly as toxic factors because of the deleterious effects they produce when taken by the animals. The term ‘toxic factor’ however, is misleading because there is an implication that the substances are lethal beyond certain level of intake.

Cyanobacterial species

Cyanobacterial species viz., Anabaena variabilis, Anabaena fertilissima, Nostoc muscorum, N. punctiforme, N. linckia, N. commune, Spirulina platensis, Westiellopsis prolifica and Hapalosiphon sp. were obtained from National Center for Conservation and Utilization of Blue-green Algae, Indian Agricultural Research Institute, New Delhi. Cultures were maintained in BG-11 growth medium throughout the study in the laboratory.

Similar to animals of the higher order, insects also possess all important internal systems of organs necessary for the proper performance of the various vital functions. The most important of the systems are the alimentary or  digestive  system,  the  circulatory  system,  the  respiratory system, the reproductive system and the excretory system. The fundamental arrangement of the various organs is more or less similar in all insects and does not exhibit much remarkable variations as seen in the external morphological features. The dorsal blood vessel or heart runs along the median line immediately below the dorsal wall. The digestive system including the alimentary canal and its appendages lie in the middle, below the heart. The nervous chain lies below the alimentary canal and immediately  above  the  ventral  wall.   The  organs  connected  with  the reproductive system are found in the posterior region of the abdominal cavity on both sides of the alimentary canal.  Though these arrangements are characteristic of all Arthropods, including insects, they are quite different in the higher animals (Fig.23)

Insect pest control includes all measures adopted to make the life of insects hard and ultimately to destroy them or to prevent their multiplication and spread. Such measures can be taken up before the appearance of the pests or after occurrence of the pests. To achieve this purpose, it is quite necessary to know the factors which favor the occurrence of the pests and acquire enough knowledge about the nature and life cycle of the pests, the vulnerable growth stage at which they can be effectively destroyed and appropriate measures of control. Control measures may be either preventive or direct.
Insect pest control is broadly classified under two different heads viz., natural control and applied control.

I. Natural control
    1.    Climatic conditions. Temperature, rainfall, sunshine etc.
    2.    Physical or topographic factors. Mountains, oceans, rivers, lakes, forests, deserts etc.
    3.    Natural enemies. Parasitoids, predators including insects, birds, mammals, reptiles etc.
    4.    Disease causing organisms or parasites. Entomophagous fungi, bacteria, viruses and other microorganisms.

The information that drives the process of life is encoded in the genome of the organism. Structurally defined, a genome is an organization of genetic information consisting of nucleic acids (deoxyribonucleic acid or ribonucleic acid). Arrangement of nitrogenous bases in the nucleic acid codes the information for execution of cellular processes. Four types of bases (Adenine, Guanine, Cytosine and Thymine) are present in deoxyribonucleic acid (DNA) while in RNA Uracil replaces thymine group of any three bases on transcribed RNA represent a codon. With four types of bases, sixty four types of codons can be formed. Genetic information encrypted in these codons is released in the form of arrangement of polypeptides consisting proteins via mRNA intermediate. This universal process of flow of genetic information from DNA to RNA to protein is known as the central dogma of life. The whole set of information coded in 64 codons, out of which 61 codes for one or more amino acids (building block of polypeptides/proteins) and three indicating where to stop is called the book of life or genetic code.

Introduction

In present times aquaculture is being practiced using both conventional or non-conventional methods with considerable variations. Aquaculture can be termed as – extensive, semi-intensive and intensive based on operations and involvements. An increase in the intensity of aquaculture requires an increase in capital as well as operational costs.

Here we will examine the three main levels of aquaculture used in various habitats and later consider the conventional methods of aquaculture.

Different Levels of Aquaculture

Fish culture practices can be classified into three different kinds or levels on the basis of the intensity of aquaculture in terms of capital as well as operational costs. The chances of crop failure often increase with increasing intensity of aquaculture, which may involve: 

I. IMMUNOLOGY OF MALE REPRODUCTIVE SYSTEM

There are two basic functions of the immune surveillance of man and animals with respect to sperm immunity during spermatogenesis and fertilization process: support of the elimination of the vast majority of 'waste "spermatozoa that fail to fertilize and preservation of the tiny minority of surviving spermatozoa that are able to fertilize the oocytes. The primordial forms of spermatozoa arising in the seminiferous tubules of testes are preserved by the blood-testes barrier which is formed by sertoli cells ringing the semineferous tubules (Hunter, 1989). During maturation in the epidydimis, the spermatozoa acquire their antigenic properties. Simultaneously, the spermatozoa are coated with some proteins of seminal plasma having the immunosuppressive activity toward lymphocytes and macrophages involved in the immune reactions. The seminal plasma proteins accompany the migration of spermatozoa to the female genital tract (Matousek, 1985).

There are six major classes of nutrients: carbohydrates, fats, fibre, proteins, minerals and vitamins. Water is not a nutrient but play important role in livestock industry. These nutrient classes can be categorized as either macronutrients (needed in relatively large amounts) or micronutrients (needed in smaller quantities). The macronutrients are carbohydrates, fats, fiber, and proteins. The micronutrients are minerals and vitamins.

The term minerals is used by nutritionists to refer to inorganic chemical elements, but is used by many other scientists to mean a homogeneous crystalline compounds. Mineral elements are not inert materials. Mineral elements may change valence states and are transferred from one chemical compound to another. Minerals are active participants in enzymatic reactions, have specificity of function, and are critical to life.

The Mother Nature bestowed humanity with about 250,000 known plant species and perhaps the same or may be higher number of unknown plant species. Out of this treasure, 80,000 plant species are edible but human beings have probably exploited about 3,000 of these species for food and was cultivating about 150 on a commercial scale. However, largely human beings consumed only 20 different kinds of crops the world over and four of which viz. rice, wheat, maize and potato are supplying about 60 % of total calories. Under the circumstances, the food crops base even for well-known crops are shrinking at an alarming rate and in this process, many species have extincted from man’s food bowl. While doing so, we have considerably reduced the range of organic compounds that we now consume, thus making ourselves vulnerable to various stresses. Realising  importance of diverse food base in our life, thinking is going on among people of all lifestyles that more and more crops particularly those, which are known to be edible but have remained as “under-utilised crops”, should be brought into cultivation. This will ensure both food and nutritional security of people. Among these, tuber crops constitute an important crops group, which was sustaining food security much before agriculture came into existence.

Yam bean (Pachyrhizus erosus) is a leguminous tuber crop of immense production potential. The crop has high rate of dry matter production / day / unit area and is known for its high degree of photosynthetic efficiency. Besides contributing significantly as a source of food to  weaker sections, the crop has immense industrial value for extraction of starch and production of animal feed. Yam bean is well suited to small and marginal holdings and has the capacity to withstand adverse biotic and abiotic stresses. It comes up well in comparatively marginal lands and does not require intensive care. It has  great potential in developing and underdeveloped countries where most of the farmers are small and marginal . This crop is very important in the context of food and nutrition security and assumes great significance due to ever-increasing human population. Still the importance of this crop is underestimated and unlike most staples, the crop fails to attract attention of  agricultural researchers throughout the tropical and subtropical countries of the world. The crop is still largely under-exploited and is subjected to little selection pressure. A large degree of variability exists for several agronomic characteristics in the existing germplasm. With a little attention from the scientists ,this crop could usefully be exploited by genetic improvement and development of crop ideotypes which would meet a wide range of needs in developing countries.

Introduction

A geographic information system or geographical information system (GIS) is a system designed to capture, store, manipulate, analyze, manage, and present all types of spatial or geographical data. The acronym GIS is sometimes used for geographic information science (GIScience) to refer to the academic discipline that studies geographic information systems and is a large domain within the broader academic discipline of geoinformatics. What goes beyond a GIS is a spatial data infrastructure, a concept that has no such restrictive boundaries. In a general sense, the term describes any information system that integrates stores, edits, analyzes, shares, and displays geographic information. GIS applications are tools that allow users to create interactive queries (user-created searches), analyze spatial information, edit data in maps, and present the results of all these operations. Geographic information science is the science underlying geographic concepts, applications, and systems.

GIS is a broad term that can refer to a number of different technologies, processes, and methods. It is attached to many operations and has many applications related to engineering, planning, management, transport/logistics, insurance, telecommunications, and business. For that reason, GIS and location intelligence applications can be the foundation for many location-enabled services that rely on analysis and visualization. GIS can relate unrelated information by using location as the key index variable. Locations or extents in the Earth space–time may be recorded as dates/times of occurrence, and x, y, and z coordinates representing, longitude, latitude, and elevation, respectively. All Earth-based spatial–temporal location and extent references should, ideally, be relatable to one another and ultimately to a “real” physical location or extent. This key characteristic of GIS has begun to open new avenues of scientific inquiry.

STARCH : Starch is a complex carbohydrate that has been cursed by dieters in years past, but that now is praised by nutritionists as a particularly healthful source of energy. In food preparation at home starch is a very important as a thickening agent. However starch is but one of several polysaccharides that are used as thickners in the food industry.

STRUCTURE : Although starch is the name used by nutritionists this complex carbohydrate actually consists of two fractions amylose and amylopectin. The two fractions occur together in starch from most sources so the overall behaviour of starch is determined in large measure by the relative amounts of amylose and amylopectin. Each of the fraction has unique properties that contribute to the functionality of starch from various plant sources.

1. Introduction

Fruits and vegetables represent highly perishable items of agriculture, mainly because of their high water content in fresh form. Their production, yield and management under agriculture is dealt essentially under horticulture. They abound in species and varieties in different geographic regions of the world, influenced by the agro-climatic conditions. Some are endemic and confined to certain geographic regions only. Accordingly, they may be tropical, sub-tropical or temperate, depending on their requirements of temperature for growth and yield.

1. Introduction

Vegetables and fruits are the next in demand for human consumption after rice and wheat, in all parts of the globe. Fresh fruits & vegetables and their value added products are increasing in popularity day by day almost in all the countries, because of their richness in dietary fibre, minerals & vitamin contents and for their medicinal properties. Maintaining agricultural produce quality and its evaluation are thus naturally important. Decisions concerning maturity and ripeness of fruits and vegetables are based mostly on visual inspections, which are subjective in nature. The quality of fruits and vegetables is mostly decided on the basis of size, shape, colour, gloss, flavour, firmness, texture, taste and freedom from external as well as internal defects. Internal quality factors such as maturity, sugar content, acidity, oil content and internal defects, however, are difficult to evaluate non-destructively. Methods are needed to better predict the internal quality of fruits and vegetables without their destruction. Recently, there has been an increasing interest in non-destructive methods of quality evaluation, and a considerable amount of effort is being made in this direction. But the real problem is how these methods are to be exploited practically on commercial scales and what are the constraints faced in implementing them.

1. Introduction

In this era of genomics, proteomics and metabolomics the challenge in nutritional science is to clarify human nutrient requirements and design nutritional strategies to promote health and functional longevity. Our ancient Indian belief that ‘we are what we ate’ and our future health as individuals may well depend upon what we eat today. Plant-based dietary antioxidants are believed to have an important role in the maintenance of human health because our endogenous antioxidants provide insufficient protection against the constant and unavoidable challenge of reactive oxygen species (ROS). We have various endogenous defense chemicals but they are inadequate to prevent oxidative damage that makes human system prone to various degenerative diseases. Hence, it is necessary for increased intake of dietary nutraceuticals that may help maintain the balance between oxidants and antioxidants, slow age-related changes, and prevent onset of degenerative diseases.

1. Introduction

Pulpy and juicy fruits like orange, guava, banana, grape, mango, papaya, pears, apples and jackfruit can be converted into fruit products like squashes, juices, cordials and ready-to-serve (RTS) fruit beverages. These RTS fruit beverages are both refreshing and thirst quenching and have become very popular. Liquid fruits are the clarified juices prepared from these pulpy and juicy fruits. There is a demand for liquid fruits in the international market for various applications. The liquid fruits can be used as a natural alternative to synthetic beverages. They can be suitably concentrated or diluted, blended with other juices and also can be carbonated as fruit based soft drinks. Removals of pulpy material from the juices make them easier to preserve by pasteurization and are amenable to carbonation. Pulpy fruits can be successfully processed into liquid fruits (clarified juices) by using pectic enzymes. The emphasis of the fruit juice processing industry has, so far, been mainly on conventional clarification processes like enzymatic and chemical treatments followed by filtration using filter aids; and concentration by vacuum evaporation.

1. Introduction

Intermediate moisture foods are semi moist foods that have some of their water bound by glycerol, sorbitol, salt or certain organic acids, thus preventing the growth of many microorganisms (Stewart et al. 2001). It is now well recognized that fruits and vegetables are dehydrated to an intermediate moisture level (20-50%) (Stewart et al. 2001; Purvi et al. 2003). As the intermediate moisture products are characterized by a semi moist consistency so these foods have enough moisture content to permit easy chewing but low enough water content to prevent spoilage production of intermediate moisture foods is based on an increased scientific understanding of the chemical reactions involved in traditional food preservation methods (Purvi et al. 2003).
There will be better retention of original flavor and texture compared to fully dried products, with concomitant reduction in bulk, weight and cost of packaging, transportation and storage. Such intermediate moisture foods are more appropriate for developing countries in view of their minimal processing requirements, stability under ambient conditions, safety, convenience, ease of nutrient content adjustment, energy savings and low capital investment. They are also eminently more suited than dehydrated or canned foods for military rations (FAO, 2005).

From the earliest time, man had to conserve and preserve his food, so that surplus at harvest following a successful crop can be stored for use throughout the year. Prime agricultural products in general and more so with fruits and vegetables which are being processed world wide or preserved to a more stable form so that they can withstand transport, handling and storage over a long period. As civilization developed, man learnt to preserve fruit and vegetable products with salt, spices and by drying , smoking or cooling which could extend their shelf life. Later by experience, he learnt that by protecting it from environmental factors such as air, moisture and light, the shelf life of these processed products could be further increased. He tried to keep them dry and covered to protect from insects and rodents. As with solid foods, primitive man experimented with beverages also. It is likely that the first beverage known to him after water was fruit juice. This undoubtedly led to the discovery of wines made from the fermented fruit juices. Later on, preservation methods and development of packaging materials underwent drastic changes.

1. Introduction

Extrusion is one of the most preferred ways for creating the indulgence called ready-to-eat (RTE) snack foods with diverse shapes, sizes, colours and also nutritional and functional values which appeal to the diverse group of consumer with varied choices. In this chapter ready-to-eat extruded and puffed snacks are the focus covering the technology involved, criteria for ingredient selection, design of experiment, process modelling, effects of extrusion on physical, nutritional and functional quality of the snack; a few relevant case studies are also discussed.

1.1 Market for RTE snack foods

Indian cooking and lifestyle have undergone tremendous changes in the last 15 years. There are many major factors impacting this change which include, liberalization policy, dual income, separate living of couples, innovative kitchen applications, media proliferation, etc. The cooking style and eating habits in India varies drastically from southern part to northern part of the contry. Due to lifestyle pressure nowadays people prefer easy short way of cooking food rather spending too much time on cooking. Rapid urbanisation is also one of the reasons for people to buy such products. Snack foods comprise a very large variety of items including potato chips, crackers, nuts and extruded snacks, among others (Harper, 1981). Snack food extrusion includes subjecting selected raw material to a variety of complex physical processes to yield snacks with varied shapes and textures (White, 1994).

The RTE market in India was expected to expand to reach Rs. 2,900 crore by 2015, according to an analysis done by Tata Strategic Management Group (TSMG). The products may vary from noodles, pasta, masala packages, stuffed paratha, etc. and many more. There are many regional players who are making foray into ready-to-eat segment. Many national and international players like Nestle, Pepsico, ITC, Haldirams, Cavinkare, are already in Indian market with their products.

1. Introduction

Milk and milk products constitute essential dietary components for a vast majority of the population. India with annual production of more than 135.6 million tonnes has emerged as leading milk producing nation. The per capita per day availability of milk in India is more than 290 g. Buffalo milk accounts for 57% of the total milk produced in India. Ethnic dairy products account for 90% of all dairy products consumed (Aneja et al., 2002). Many health benefits have been attributed to fermented dairy products and probiotic microorganisms (Salminen et al., 1998). The market for functional foods, nutraceuticals, wellness foods and beverages is fast growing. The harmful effects of synthetic drinks have propelled health conscious consumers to go for natural and traditional drinks. In search of better returns, the Indian dairy industry is widening its focus to include traditional milk products, and these are emerging as new profit centres for the organised sector.

Traditional dairy products have several advantages. They require low capital investment and give high profit margin. They are more appealing to the Indian palate. Dahi or curd is the most popular indigenous fermented dairy product. There are numerous references to dahi in vedic literature. The Prevention of Food Adulteration Act (Anon, 1976) describes dahi as a product obtained from pasteurized or boiled milk by souring (natural or otherwise), using harmless lactic acid or other bacterial cultures. Indian dahi and its western counterpart yoghurt differ considerably in terms of cultures used and their bouquet and flavour profiles (Aneja et al., 2002). The major flavor compound in dahi is diacetyl. Dahi made from buffalo milk has a firm body and white glossy appearance, with a cream layer on top. Mixed mesophilic cultures of Lactococcus lactis subsp. lactis, Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp diacetylactis along with Leuconostoc species are grown together for production of dahi.

1. Introduction

There is a general consensus that fruit and vegetable consumption is a key factor for a balanced diet. Globally, majority of people consistently are consuming less than the daily recommended fruit and vegetable requirement. Even in developed nations e.g., Australia, Canada, Europe, UK and USA, researchers have concluded that there is large gap between actual and recommended consumption of both fruits and vegetables despite decades of concern and publicity while resultant outcomes were short-lived. In a study from 52 low and middle-income countries 77.6% of men and 78.4% of women consumed less than the minimum recommended servings of fruits and vegetables. Same study reported 74% low fruit and vegetable consumption among adults in India (Hall et al., 2009). In India, recent studies on the fruit and vegetable intake amongst urban residents was reported as 265 g per day as against 400 g per dayof fruits and vegetables excluding potatoes and other starchy tubers, that is recommended by the World Health Organization (WHO, 2008).

Epidemiological studies conducted in recent years have indicated a positive correlation between the consumption of fruits and vegetables and prevention of cancer and cardiovascular diseases. Health-promoting functional characteristics of vegetables are mainly attributable to their functional bioactive constituents. These effects can be listed as antioxidant activity, cholesterol-bindingcapacity, antidiabetic activity and angiotensin-converting enzyme (ACE) inhibitory activity. Studies conducted in cell culture models and animal models have revealed that bioactive compounds of plant foods, including soybean, hawthorn fruit, tea, buckwheat, oats, onion, garlic, almond, and vegetable juice, composed of tomato watercress, parsley, carrots, celery, lettuce, beets and spinach, have cholesterol-lowering activity (El-Shatanovi et al., 2012; Vadivel et al., 2011).

1. Introduction

Antioxidants are considered an important class of nutraceuticals which are associated with health improving properties. Antioxidants are compounds which when present in foods at concentrations lower than an oxidizable substrate, markedly delay or prevent the oxidation of substrate (Halliwell, 1999). They are increasingly applied in food systems to retard the oxidation process, particularly in lipid containing foods (Droge, 2002; Lee et al., 2004). The commercially available solutions to counter food oxidation are predominated by synthetic antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tertiary butyl hydroquinone (TBHQ), among others, which are increasingly rejected by consumers and legitimized by regulators due to long term health implications (Park et al., 2001). As a consequence, the development and utilization of natural antioxidants as alternatives to synthetic ones have attracted global interest among researchers.

The use of spices and herbs in foods was known since ancient times to modify or to improve the flavor. However, the antioxidant properties of only some of the spices have been recognized. Different spices and their extracts such as turmeric, ginger, fennel, rosemary, and sage, among others, are reported to possess very high antioxidant properties, owing to the content of biologically active compounds, which enables their food application (Madhavi et al., 1996). Exploitation of natural antioxidants in consumer goods is increasingly accepted and will gain momentum due to the rise of green consumerism. In this chapter, an attempt has been made to provide an insight into natural antioxidants and colors. Beginning with the source distribution of natural antioxidants, followed by review of extraction methods for their isolation from plant based matrices and bio-preservative properties in vegetable oils to delay rancidity. Lastly, a thorough collection of literature pertaining natural colors has been presented to potentiate the application of clean label ingredients in food systems. The application of natural antioxidants and colors in food products can vouch the food safety with value addition in terms of their nutraceutical properties.

Introduction

The tropical root and tuber crops are comprised of crops covering several genera. They are staple foods in many parts of the tropics, being the source of most of the daily carbohydrate intake for large populations. These carbohydrates are mostly starches found in storage organs, which may be enlarged roots, corms, rhizomes, or tubers. Many root and tuber crops are grown as traditional foods or are adapted to unique ecosystems and are of little importance to world food production. Others such as cassava (Manihot esculenta Crantz) and white-fleshed sweet potato (Ipomoea batatas L.) are known worldwide. Several of these crops have been termed under-exploited and deserving of considerably more research input

Potato and Banana chips: Potato chips are one of the popular snack foods consumed throughout the country. Chips are mostly prepared by small scale artisans / confectioners, and sold in plastic film or paper packs. Recently, however some of the companies have installed plants having relatively large capacities and have started marketing chips in attractive packs. The fat content generally ranges between 25-40% and moisture content between 2-4%. Potatoes having high total solids, low reducing sugars and low amylase activity are most suitable for chips manufacture.

Banana chips are prepared from varieties rich in starch having very low levels of soluble sugars and polyphenol - oxidase activity. These are mostly processed and marketed in Southern States especially in Kerala. Previously, the chips were fried in coconut oil, but now other vegetable oils are also used in their processing. Relatively, banana chips are harder in texture than potato chips.

Introduction

In terms of individual health and physical condition, the situation in modern society is rather giving rise to concern. The last decades have seen a tremendous increase in availability and variety of food products which has undoubtedly affected the food habits of the average individual. Despite the fact that food has become overall safer and increased accessibility allows for healthier diets, worrying we are nevertheless faced nowadays with diet- related diseases of proper epidemic proportions. We now encounter an epidemic of obesity that spreads not only to the majority of the adult population but also, more worryingly, to young people who have rarely the option of alternative diets. Moreover, as scientific proofs for the link between diet and disease (particularly cardiovascular diseases and some cancers) accumulate, action is urgently needed. There are an increasing number of calls for action. It is within this situation that functional foods have developed. They assume a highly targeted solution to the diet related diseases with effective reduction of risk and improved physical and mental well being. That represents a big step from the traditional food-for-nutrition but the scientific milieu is ready to take the chances. The emerging ‘functional food science’ is focusing research on the effects of functional foods on growth, development, metabolism, the cardiovascular system, intestinal physiology, and even on behavioural and psychological functions (FAIR, 2000, Vol. 1). In view of these facts, it should appear necessary to assess and evaluate the developments in food production in terms of their effect on the individual consumer and the society at large.

    1.    As per FSSAI, 2011 regulations, what is the fat and SNF content in buffalo milk
        a)    5 & 9    b)    6 & 8
        c)    6 & 9    d)    None
    2.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  cow milk
        a)    4 & 9    b)    4 & 8.5
        c)    6 & 9    d)    None
    3.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  standardized milk
        a)    4 & 9    b)    4.5 & 8.5
        c)    6 & 9    d)    None

Seed processing, drying, cleaning and upgrading

Seed processing refers to all the steps necessary for preparation of harvested seed for marketing namely handling, drying, shelling, preconditioning, cleaning, size grading testing, and packaging etc.

Layout for seed processing plant

Layout plan for construction of seed processing plant should be carefully planned to ensure that thorough seed cleaning, upgrading, seed treatment and other seed processing operations are carried out efficiently without mixing and damaging seed lots with minimum equipment, personnel, time and at minimum cost.

The following factors should be considered while planning and designing the processing unit:

• Database
• Data Model
• Database Software
• DBMS Facility 
• Architecture for a DBMS
• Data Modeling
• Components of a Data Mode
• RDBMS (Relational Database Management System)
• Client/Server Model of Computing
• Entity Relationship Diagram (E-R diagram)
• Entity Relationship Diagram Notations - Front-end and Back-end
• Codd’s Rules
• SQL - Structured Query Language
• Data Definition Language (DDL)
• Data Manipulation Language (DML)
• DCL
• Data Control Language
• Transaction Control (TCL)

1.    A farm is a

(a) Producing unit

(b) Consuming unit

(c) Both of a & b

(d) None of these

2.    Farm is a_________unit.

(a) Economic

(b) Social

(c) Decision making

(d) All of these

Meaning, Concept & Definition of Education

1. “Education is the process of developing capabilities of the individuals so that they can adequately respond to their situations”.

2. The modern definition of Education- “It is the production of desirable changes in human behavior- in knowledge (things known), attitudes (things felt) and skills (things done), in all of them or in one or more of them”.

3. Education is the process of giving training and instruction to people to develop their knowledge, abilities, skills, character and mental powers.

Knowledge: It includes-facts, concepts, principles and relationship.

For example: Extension worker educates a farmer on cultivation practices in sweet corn. (Things known)

Attitude: An attitude can be loosely defined as a feeling towards some object, person, and situation or idea. For Example

Extension worker changes the negative attitude of a women farmer and makes them adopt Mushroom cultivation. (things felt)

Skills: Ability to do things.

For example: Extension worker improves skills of a cotton farmer on stem application of pesticide (things done)

Section-A : Write True / False

Q.1 A random variable (r.v) is a real number x connected with the outcomes of a random experiment.

Q.2 In tossing of a balanced die at one time, the number coming on the upper most face of the die is a random variable x which takes any one out of 6 values taken as 1, 2, 3, 4, 5, 6.

Q.3 Let s be the sample space associated with a given random experiment. A real valued function defned on s and taking values in R (-∞,∞) is called one dimensional random variable.

Q.4 In general a n dimensional random variable is simply a function whose domain is S and whose range is a collection of n-tuples of real members (vectors in n-space).

Evolution is a self-occurring natural phenomenon by which new organisms develop gradually as a result of change in genetic pool of a population. It is a very widely and historically studied phenomenon which still surprises scientists due to its underlying complexity. The three processes which contribute most to evolution are genetic drift (also known as random drift or allelic drift), natural selection and mutations. Genetic drift and natural selection act at a population level, whereas mutations act at individual level. For evolution to occur, the changes these processes bring about must be heritable, which they are.
 
Genes are present on chromosomes inside nucleus of the cell and the collection of all the genes in a cell is known as the genome of that cell. Genome size and complexity varies from species to species. Simple organisms, such as bacteria and protozoans have a very simple genome, with very few genes, whereas complex higher organisms such as humans have a large genome, with thousands of genes. The position of a gene on a chromosome is known as a locus. Organisms may have more than one copy of a chromosome in the cell.

1.    Factors Causing Spoilage of Foods
    
2.    Methods of Preservation
    
3.    Preservation by use of Preservatives
    
4.    Preservation by Irradiation
    
5.    Preservation by Low Temperature
    
6.    Methods of Food Freezing
    
7.    Principles of Preservation by Fermentation
    
8.    Preservation by Dehydration
    
9.    Preservation by Thermal Processing
    
10.    Advantages of Processing
    
11.    Demand for Processed Products
        
References

INTRODUCTION

The propagation of plants has been one of the fundamental occupations of mankind since beginning of civilization. Plant propagation involves the application of specific biological principles and concepts in the multiplication of plants for useful purposes. The present day plant propagation industry is large and complex and involves not only the group that multiplies the plants for sale and distribution, but also a large group of industries that provide services, sell the product, is involved in regulation, provides consultation carries on research or is involved in teaching. The key person with in this complex, however, is the plant propagator who possesses the knowledge and skill either to perform or to supervise the essential propagation tasks for specific plants.

INTRODUCTION

Custard apple (Annona squamosa L.) is considered as one of the delicious fruit meant for table purpose. In India, during the year 2014-15 the area under cultivation of custard apple was 29870 ha with production of 228370 tones and productivity of 7.65 tones ha-1 (Anon, 2015a). In Maharashtra, the area increased by 9 to 10 times recently i.e. since 1990 onward, after start of Economic Guarantee Scheme (EGS) of Government of Maharashtra. Hence, Maharashtra is the leading state in custard apple production, wherein during the year 2014-15, the area, production and productivity of custard apple was 8660 ha, 59330 tones and 6.85 tones, respectively. This accounts about 25.98 per cent share of the state in the national production. This is followed by Gujarat, Chattisgarh, Madhya Pradesh and Karnataka. (Anon, 2015a). The largest area of nearly one third of the Maharashtra State is in Purandar tahsil of Pune district. An average production of custard apple in Purandar area is about six tons ha–1. The farmers fetch high economic returns at very low input cost. Besides, export quality fruits get very high price ranging from Rs. 70 to 800 kg-1 (Anon, 1998) in foreign countries.

INTRODUCTION

Persian walnut (Juglans regia L.) is of great importance across worldwide where nuts are harvested from wild stands, backyard gardens and rarely from commercial orchards that vary considerably in their size and degree of management. Nuts are collected for home consumption, sale at local roadside stands and markets and for shipping to cities. Walnut trees are further utilized for their high quality timber to make a wide array of products. The leaves, bark and other plant parts are used for medicinal remedies and trees are grown and maintained for soil conservation purposes (Mamadjanov, 2006b). A diverse mix of seedlings, local selections, and advanced cultivars are grown for nut production, many with unknown origins, including some of which are the direct result of selection from the wild.

Dietary constitution of Indian people is mostly cereal based. However, the cereals supply chiefly carbohydrates. Therefore, there is deficiency of protein, minerals and vitamins, especially vitamin A, riboflavin, vitamin C, etc. in the diet. The dieticians advocate the intake of 125 g leafy vegetables, 75 g other vegetables and 100 g root and tuber vegetables (total 300 g) everyday because vegetables provide all the nutrient components like carbohydrates, protein, fat, minerals, vitamins and water along with roughages, which are the essential constituents of a balanced diet.

India has attained food security by increased cereal production due to green revolution. In case of vegetables, although there has been increase in production from 15 million tonnes during 1950 to 94 million tonnes in 2005 but still more vegetables are needed to meet the minimum requirement of at least 250 g per day per capita. There has also been increasing demand for fresh export and for processing industries. Moreover, there is a pressure for increasing vegetable supply caused by constantly increasing population in a world of limited acres.

Addition of new agricultural land is of course not possible. In this situation, plant breeding can be expected to contribute substantially to greater vegetable productivity. This can be accomplished not only by the breeding of basically higher yielding varieties but also by the development of varieties that help to stabilize production through resistance to various biotic and abiotic stresses.

Key facts
    
•    Dioxins are the most dangerous and ‘super toxic’ chemicals so far known on the earth and three closely related families are collectively known as dioxins. These are Polychlorinated dibenzo-p-dioxin or dioxins (PCDDs), Polychlorinated dibenzofurans or furans (PCDFs) and polychlorinated biphenyls (PCBs).
    
•    2, 3, 7, 8-TCDD (or called TCDD) is the most potent of all the congeners. The toxicity equivalency factor or TEF of TCDD has been assigned as 1, while all other congeners assigned in order of toxicity ranking magnitude relative to TCDD.
    
•    There are 75 compounds/congeners in the dioxin family (PCDD), 135 compounds in the furan family (PCDF) and 209 possible compounds in the PCBs based on the possible number of chlorine atoms.
    
•    The toxicity of dioxins and dioxin-like compounds vary substantially among the different PCDDs, PCDFs and PCBs. It is generally accepted that only 29 out of the 419 congeners of dibenzo-p-dioxins, dibenzofurans and polychlorinated biphenyls are toxic to humans and other organisms. The TCDD is most toxic and registered by the WHO as carcinogenic for humans.

CONTRACEPTION DUE TO MISALLIANCE AND TERMINATION OF PREGNANCY IN BITCHES

It is obvious that breeders maintain varieties of breeds but mismating do occur within their own premises and sometimes by unwarranted stray animal.

Misalliance complicates too many other problems.

Incidence of mismating is 15 to 20 percent in canine breeding.

3.1.Processes
                    
    Leaching                    
    Fragmentation/Comminution
    Catabolism                    
    Decomposition models
                
3.2. Patterns
                    
    Litter decomposition
    Root decomposition                    
    Limit values for decomposition            
    Decomposition pattern in ecosystems

Abstract

We studied the mathematic model of “predator-prey” and„ pest-parasite”. Under the circumstances when these two specious coexist in particular conditions. In that case the components of the system continuously change. We describe the system by two differential equations which conclude into numeral equation by integrators and variables. According these equations we calculate some numeral formulations essential to these changeable populations.
  
We produce the prevalence of predator-prey systems by using analytic and quantitatic methods for massive rage of data. This process as usual is described by the differential equation consisting assembling point. The constructed phase portrait which we need to solve the problem is found by Runge-Kuta method. So the article speaks about the conformity with a law which we receive by permanent change of parameters’ menaings and temporal changes of biological systems’ conditions.

When there is no positive steady state both prey and predator can become extinct. In one particular case both species become extinct regardless on the initial data. In the second, both species will die out only if initial prey/predator ratio is too low. Otherwise, only the predator goes extinct, while prey tends to carrying capacity.

“Educational Technology is the application of scientific knowledge about learning and the conditions of learning to improve the effectiveness and efficiency of teaching and training. In the absence of scientifically established principles, educational technology implements techniques of empirical testing to improve learning situation”.

National Centre for Programmed Learning, UK
“Educational Technology is a complex, integrated process involving people. procedures, ideas, devices and organization for analyzing problems and devising. implementing, evaluating, and managing solutions to those problems, involved in all aspects of learning”.

Association for Educational Communications and technology (AECT), 1977
The most recent definition of the field (which uses the term, instructional technology) has been published by the Association for Educational Communications and Technology (AECT). It defines Instructional Technology as “the theory and practice of design,

Participatory technology development (PTD) is an approach to learning and innovation that is used in international development as part of projects and programmes relating to sustainable agriculture. The approach involves collaboration between researchers and farmers in the analysis of agricultural problems and testing of alternative farming practices.

Origins of participatory technology development

The origins of Participatory Technology Development can be found in a number of approaches, concepts and techniques that became popular in the 1970s and 1980s:

Farming systems research and extension, an approach that introduced social-ecomomic issues into organisations previously dominated by biological and chemical scientists. FSR/E also promoted the idea on ‘on-farm’ trials:

Appropriate technology, a concept that recognises the importance of matching the design of technology to the resources and culture of the user.