eChapters

Types of bones
Bones forming the animal skeleton can be classified into two types such as compact bone (cortical) and spongy bone (trabecular / cancellous). The compact bone is found in diaphysis or shafts of all the long bones of forelimbs, hindlimbs and outer surfaces of the flat bones of skull and ribs. In contrast, the spongy or trabecular bone is found in epiphysis or extremities around the bone marrow cavities of long bones and centre of flat bones and vertebrae. As the name implies, the compact bone is solid and hard due to the arrangement of special collagen in the bone (Type I) forming the bands or lamellae parallel to each other surrounded by a cement of proteoglycan ground substance deposited with minerals. Whereas, the spongy bone is made up of meshwork of bone strands running in all directions arranged as trabeculae adapted for weight bearing ability in heads and condyles of long bones.
Structure of bone tissue
The bone consists of bone cells, extracellular organic matrix made of collagen fibres and minerals. The cells of bone are osteoblasts, osteocytes and osteoclasts. Osteoblasts are low columnar to squamous cells responsible for active synthesis and mineralization of bone matrix found mainly in the periosteum and endosteum. Osteocytes are responsible for structure of the bone and calcium homeostasis found in the mature bone. It is located in the lacunae with extensive cytoplasmic processes running through canaliculi with in the bone matrix to make communication between adjacent osteocytes. Osteoclasts are multinucleated (15-30 nuclei per cell) larger cells responsible for bone resorption and remodelling. The secretion of these cells composed of acid and lysosomal enzymes responsible for erosion of bone tissue thereby formation of Howship’s lacunae (Frappier and Eurell, 2006).

Introduction
Improved varieties, hybrids and quality seeds are considered as the basic and key inputs for the development of agriculture and horticulture. High quality seed production has been the major concern in the Indian sub-continent till 1960s. Before that, India was mostly dependent on USA for food grain. After 1960, Government of India established State Agricultural Universities in different states following “Land grant model” of USA, different ICAR Research institutes and All India Coordinated Crop Research Projects in a systematic manner to give the boost to develop large number of improved varieties with assured seed quality in all major agricultural and horticultural crops. The ultimate intention was to introduce the newly developed high yielding varieties for broad spectrum cultivation in the area of their adoption.
Importance of variety and system of its release
There are several ways and means to increase the crop production and productivity, however using genetically pure and high-quality seed is first and prime objective in agriculture/ horticulture. Govt. of India acknowledged seed as an essential commodity under essential commodities Act, 1955.

Identification of the insects is the integral part of systematics. It utilises all taxonomic procedures. The collections in the world are the accumulation of past taxonomists and are stored for the future identifications. Every species name is based on a published description or figure and usually on the type specimen. Identification is the association of other specimens with the appropriate description or with type specimen.

The steps in identification are as follows:

1. Preliminary key to orders and families

2. Key to genera and species if recent monographs or faunal works are available

3. Reference to the most recent catalogues

4. Reference to current bibliographies for literature published subsequent to the most recent catalogues

5. Reference to original descriptions

6. Comparison with the authentic described specimens or with types.

Environmental agents (xenobiotics) that are injurious to cells trigger a spectrum of responses that can range from cell death to adaptation, repair, and proliferation. Cell death, in turn, can take the form of apoptosis (a programmed form of cell death). Xenobiotics have been implicated in toxic cell injury, among them free radicals (nitrogen, oxygen, and carbon derivatives) are known to interact with cellular constituents including membrane lipids and chromagen materials.

Cytotoxicity

Cytotoxic: Toxic to cells, cell-toxic, cell-killing. Any agent or process that kills cells. The prefix cyto- denotes a cell. It comes from the Greek “kytos” meaning hollow, as a cell or container. Toxic is from the Greek “toxikon” = arrow poison.

In nutshell, cell cytotoxicity refers to the ability of certain chemicals or mediator cells to destroy living cells. By using a cytotoxic compound, healthy living cells can either be induced to undergo necrosis (accidental cell death) or apoptosis (programmed cell death).

Measuring cytotoxicity can prove to be very valuable tool in identifying compounds that might pose certain health risks in humans and animals. Cytotoxicity assays are widely used by pharmaceutical industry to screen for cytotoxicity in compound libraries from initial high-throughput drug screens for unwanted cytotoxicity. This can be of vital importance and prove to be quite indispensable during research phase of developing therapeutic new pharmaceutical products to ensure the safety of end-users. Additionally, understanding the mechanisms involved in cytotoxicity can likewise give researchers a more in-depth knowledge on the biological processes (both normal and abnormal) governing cell growth, cell proliferation and death. Compounds that have cytotoxic effects often compromise cell membrane integrity. Therefore, assessing cell membrane integrity is one of the most common ways to measure cell viability and cytotoxic effects. There are three commonly used methods which can be employed to assess in vitro cytotoxicity (disruption of cell integrity) in cell cultures:

Methods of Analysis

Organic material especially, seeds, grains, fruits and nuts contain mainly three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for the quality as well as their commercial value.

The composition and quality of grains and other plant products vary with respect to their genetic background, location or the soils under which they are grown, season or the environment, the maturity of the grain/product or its harvest stage and the post harvest processes including storage etc. Crop scientists have in recent years been bringing out made to order or designer seeds, whose quality and composition need to be examined to satisfy the needs of the quality conrol and consumer requirements. Keeping this aspect in view this chapter has been designed.

As this book deals with oilseeds, emphasis has been placed on methods of evaluation relating to thier composition and quality. This chapter deals with methods of oil, protein and sugar analysis. Oil being the major constituent of oilseeds, importance has been given to methods of oil quality evaluation including fatty acid profile. Antinutrients especially aflatoxins, glucosinolates, ricin, oxalate, phytic acid, oligosaccharides, etc. also find a place. Analytical methods of some vitamins and minerals have also been included. Only a few important and most essential procedures relating to oilseed quality have been presented. The analyst can find more details and methods of evaluation of other constituents in standard laboratory analytical manuals.

The Indian Society for Protected Cultivation (ISPC) has organized a National Seminar on ‘Advances in Protected Cultivation’ at the NASC Complex, DPS Marg, Pusa, New Delhi, on 21 March 2013, with an objective of collection and collation of scientific advances made in protected cultivation in India and dissemination of these among policy-planners, farmers, students, scientists, industry and other stakeholders. In spite of the fact that protected cultivation is in its state of infancy in the country in terms of scientific engagements, more than 120 delegates from distant parts of the country registered for the seminar besides good number of policy-planners, recognized names in agriculture and higher officials from industry particularly corporate associate life members of the society.

In the inaugural session, Dr Brahma Singh, President, ISPC and Chairman, Organizing Committee welcomed the Chief Guest Padama Bhushan, Dr R S Paroda, formerly Secretary and Director-General, Indian Council of Agricultural Research (ICAR), New Delhi and Chairman Haryana Kisan Ayog, Chaudhary Charan Singh Haryana Agricultural University , Hisar ; Guests of Honour Dr M M Pandey, Deputy Director-General (Agricultural Engineering), ICAR and Dr H S Gupta, Director, Indian Agricultural Research Institute, New Delhi, other dignitaries on and off the dais, delegates, press and media. He also highlighted that this seminar intended to review the advances made in protected cultivation in India with a purpose to accelerate the same. He emphasized that protected cultivation offers opportunities to earn more from the limited land, water and other resources. It also enables production of quality products which fetch more prices and pride, besides being a potential practice for provisioning disease-free quality planting material for horticultural crops.

4.1 Introduction
Companies that produce tangible items or offer services must drastically increase their productivity in order to maintain their operations in the face of intensifying global competition. A single quantum jump productivity enhancement technique or multiple concurrent incremental improvement productivity strategies can both be used to achieve this goal. If a business chooses the second choice, integrating various tactics for a significant increase in the total productivity would be quite difficult. The first alternative, a single productivity improvement plan, will make it possible for the business to increase productivity with the same or greater success. The only difficulty with this strategy is locating the probable problem area and then using process improvement techniques to achieve the anticipated dramatic increase in productivity. Business process reengineering refers to any significant adjustment of business processes that results in a dramatic increase in an organization’s productivity. Price, quality, after-sales support, adherence to delivery schedules, technological breakthroughs, etc. are some elements that influence market competition. Therefore, the business should focus its efforts on each of these areas in order to achieve notable improvements in terms of decreased operating costs and higher sales revenue from the sale of its goods and services to clients. Improved pricing for a company’s goods or services can provide it an advantage over competitions. Applying various cost-cutting strategies to lower variable costs and overhead costs will lower the price of the good or service. The other elements, viz. quality, after-sales support, delivery schedule adherence, and technological advancements are all directed in this direction

Introduction

Thermal processing is an important treatment for food preservation is, especially in the manufacture of shelf-stable foods with specific nutritional properties. It is also indispensable for determining the sensory properties, particularly, colour, flavour, and texture of fried, baked, and roasted products. As a result of heat treatment, chemical changes induced, and a plethora of new molecules are formed in foods, some of which have been claimed to be health-promoting antioxidants and anti-mutagens. However, reports suggest that thermal processing leads to the formation of certain toxic compounds, so-called process-induced contaminants in foods. The process-induced toxicants are certain compounds which are formed in food as a result of food processing, exert adverse toxicological effects, and cause potential health risks to humans. Acrylamide, furan, chloropropanols, heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and N-nitrosamines are some well-known examples of thermal process contaminants.

Let‘s dive deeper into the processes of condensation and explore each in more detail:
• Adiabatic Processes: Adiabatic cooling occurs when air rises and expands, reducing its temperature (Fig. 9.1). This process can lead to condensation and cloud formation. There are several ways air can rise and cool adiabatically:
• Orographic Lift: When air is forced to rise over a mountain or hill, it cools, and condensation occurs, resulting in clouds and precipitation. This is why mountainous regions often experience more rainfall than surrounding are as.
• Frontal Lift: When two air masses with different temperatures and humidity levels meet, the warmer air is forced to rise, cool,
and condense, forming clouds and precipitation. This can lead to significant weather changes, such as the formation of fronts and lowpressure systems.
• Convection: When the sun heats the ground, it warms the air closest to the surface, causing it to rise and cool, leading to condensation and cloud formation. This process can lead to the development of cumulus clouds, thunderstorms, and other types of convective weather.

Abstract

Kulfi is a mixture of fat; sugar and milk solid not fat together with added flavour. So diabetics people on restricted diets cannot consume kulfi having normal ingredients. Now-a-days, consumers demand for low fat/calorie products has significantly raised in an attempt to limit health problems, to lose or stabilize their weight and to work within the frame of a healthier diet. The role of fat replacers and sugar substitutes in the successful manufacture of these products is crucial. Development of sugar free kulfi would certainly ensure diabetic/obese people to enjoy ice cream/ kulfi. The current study is to standardize the kulfi recipe with fat and calorie replacer. Basic formula mix consist of Whole milk 60 percent, SMP 12 percent, Sugar 13 percent, Cream 15 percent and Stabilizer 0.5 percent where the whole milk was replaced by skim milk, cream and sugar was replaced by maltodextrin as a bulking agent and aspartame respectively alongwith sodium alginate as a stabilizer. The replacers were incorporated at four different levels of 0, 25, 50, 75 and 100 percent to the basic formula mix. Freezing of above kulfi mix was done by traditional method and softy freezer method. Sensory evaluation was carried out by using 9-point hedonic scale through semi-trained judges and results were statistically analyzed. On the basis of sensory scores it was revealed that sugar could be replaced 100% by artificial sweetener, bulking agent (Maltodextrin). It was found from the sensory scores that the milk fat in kulfi can be replaced upto 75 percent by sodium caseinate thereafter increase in caseinate gives prominent flavour of casein and kulfi body becomes thick and hard. It was concluded from the results that 100 percent sugar replacement was found feasible in preparation of low fat and low calorie kulfi. Results of the low fat and low calorie kulfi mix indicated that there was 32.29 percent reduction in the calorific value of experimental kulfi as compared to the control sample (traditional). It was concluded from the results that the kulfi with 75 percent less fat and 100 percent sugar free can be prepared with low cost in comparison with control.

Fruit beverages

Fruit beverages are highly refreshing, thirst quenching, appetizing, easily digestible and nutritionally far superior to synthetic drinks. The fruit beverages includes natural and sweetened juices, squash, syrup, cordial, nectar, Ready to Serve (RTS) beverages, fruit juice concentrate and citrus juice barley water. Fruits most commonly used to prepare beverages are oranges, lime, pineapple, grapes, cashew fruit, mango, jack fruit, apple etc. To prepare fruit beverages select fresh, fully ripe, tart, juicy and seasonal fruits.

Introduction

India is bestowed with varied agro-climatic conditions. Thus, horticultural crops have lot of potential in the country. India has witnessed voluminous increase in horticulture production over the last few years, which has undoubtedly doubled the income of farmers. As a result, the country has emerged as the 2nd largest producer of fruits (102.48 million tonnes) after China during 2020-21 (Anonymous, 2023). The abundance of fruits ranging from tropical delights like mango, banana, guava and papaya to temperate fruits such as apple, peach, plum, apricot and pear, have laid a robust foundation for the growth of the fruit processing industry. This chapter delves into the dynamics of fruit processed products in both local and international markets, exploring the challenges, opportunities and strategies for sustained success. Fruit processing plays a crucial role in adding value to horticultural produce, enhancing shelf-life and meeting the diverse demands of local and international markets. In India, a country blessed with abundant fruit varieties, the processed fruit industry has been witnessing significant growth, catering not only to the domestic market but also making strides in the global arena. The processing of these fruits into various products such as juices, pulps, concentrates, jams and dried fruits has emerged as a thriving industry. This chapter will provide insights into the current state of fruit processed products in India, their importance for both local consumption and export markets, challenges faced by the industry and potential avenues for the future growth.

Introduction

India, with its unique agro climatic conditions is capable of producing a wide variety of fruits and vegetables. These highly perishable produce in both fresh and processed forms are of high demand in domestic as well as international market. Nowadays farming is becoming an enterprise and shifting towards consumer driven agriculture. Produce quality measurement is of utmost importance as consumers are more quality conscious and ready to pay higher for quality. Consumer preference is moving towards healthy food, minimally processed and, fresh cut fruits and vegetables, prepared salads, ready to cook, ready to eat and ready to drink health beverages. Hence health, nutrition, convenience, quality and safety of produce should be guaranteed to the consumers. Due to globalisation of production and trade, legislations and standards for markets are strict and product quality is the necessity for competitive markets.

Quality of a produce, based on subjective and objective measurement, is defined differently by consumers, wholesalers, retailers, processors or any other who is associated with it and varies with market either national or international. Quality of foods may be defined as the composite of those characteristics that differentiate individual units of a product, and have significance in determining the degree of acceptability of that unit to the user (Kramer, 1965). According to ISO (International Organisation of Standardisation), “Food quality is the totality of features and characteristics of a product that bear on its ability to satisfy stated or implied needs” and as per CAC (2003), “Food safety is the assurance that food will not cause harm to the consumer when it is prepared and/or consumed according to its intended use”. Food safety is the most important component of quality.

Processed fruit and vegetable are considered as staple food products throughout the world, and are becoming more popular with the increase of the global urban population. As a result, demand for processed fruit and vegetable products tends to increase with population growth in the world. There is strong demand for processed fruits and vegetables in the developing world over the past few years. In poor countries, people consume less fruits and vegetables due to the relatively high prices. All forms of preserved fruits and vegetables are available only to the urban elite people. But rural mosses producing more than 90 % of these fruits and vegetables are usually deprived of their uses.

Demand of Processed Fruits and Vegetables

Demand of processed fruits and vegetables is increasing in the developing as well as under developing countries of world. The following reasons are responsible for day by day increasing demand of processed fruits and vegetables.

Let’s dive deeper into the processes of condensation and explore each in more detail:
• Adiabatic Processes: Adiabatic cooling occurs when air rises and expands, reducing its temperature (Fig. 10.1). This process can lead to condensation and cloud formation. There are several ways air can rise and cool adiabatically:
• Orographic Lift: When air is forced to rise over a mountain or hill, it cools, and condensation occurs, resulting in clouds and precipitation. This is why mountainous regions often experience more rainfall than surrounding are as.
• Frontal Lift: When two air masses with different temperatures and humidity levels meet, the warmer air is forced to rise, cool,
and condense, forming clouds and precipitation. This can lead to significant weather changes, such as the formation of fronts and lowpressure systems.
• Convection: When the sun heats the ground, it warms the air closest to the surface, causing it to rise and cool, leading to condensation and cloud formation. This process can lead to the development of cumulus clouds, thunderstorms, and other types of convective weather.
• Non-Adiabatic Processes: Non-adiabatic cooling occurs when air cools without rising. There are several ways this can happen:
• Radiation Cooling: When the ground rapidly loses heat by radiation, the air above it cools, and condensation occurs, forming dew, frost, or fog. This process typically occurs overnight, especially in clear skies and calm conditions.

1.    Substantially used metal for manufacture of tin container for heat processed food is

(a) Aluminum

(b) Steel

(c) Iron

(d) Glass

2.    The steel used for the manufacturing of tin free plate metal food cans is

(a) High carbon cold rolled steel

(b) Low carbon hot rolled steel

(c) Low carbon cold rolled steel

(d) Moderate carbon hot rolled steel

3.    Which are the processes primarily used to fabricate the plastic containers used in sterilization process?

(a) Molding and injection

(b) Blowing and injection

(c) Cutting and heating

(d) Conditioing and calendering

Introduction

Rice is grown in more than 100 countries in the world and is an important crop for nutritional security of large part of the population. World rice production in 2007 was approximately 645 million tones. Around 50 countries have an annual production of more than 1 million tones. Ninety percent of the total rice is produced in Asian countries, with two countries, China and India, growing more than half the total crop. Top ten rice producing countries are China, India, Indonesia, Bangladesh, Vietnam, Thailand, Myanmar, Japan, Philippines, and Brazil. In Bangladesh, Cambodia, Indonesia, Lao PDR, Myanmar, Thailand, and Vietnam, rice provides 50-80% of the total calories consumed. Major part of the rice is consumed locally where produced and only 6-7% of world rice production is traded internationally.

3.1. General Introduction

Value addition refers to the conversion of a raw commodity or commodities into a processed product through the use of raw materials, labour, time and technology, all mixed in a way that ensures increased economic return. Even if the amount of processing in a product is much less, for example, any canned fruit can be considered as a processed product. Value added processing of horticultural food crops, mainly involves actions which changes fresh fruits and vegetables to create a greater value-added product for human consumption, which mostly includes canned products, juices, soups, sauces and dehydrated fruits and vegetables (Sharan, 2018). It results in diversification of agricultural activities, improves value addition opportunities and creates surplus for export of processed agro products. Processing often goes with perishable products like meat, milk, poultry, fruits and vegetables, often termed as High Value Products (HVPs), are in greater demand of processing (Sanal & Krishna, 2017). The demands for processed products are particularly strong in developing countries like China and India; mainly due to increasing industrialization and rapid urbanization, followed by elevated income levels, greater diversity in diets, and affinity towards premium-branded products (Sharan, 2018).

Objectives

1. To know the various steps involved in the processing of various spices and condiments.
2. To know the grade of some spices and condiments.

Processing: Perform a series of mechanical or chemical operations on (something) in order to change or preserve it.

Processing of some spices and condiments are given below

1. Black pepper

Processing involves the following steps:

1. The fresh berries are dipped in hot water for a minute which results in an attractive black colour and also reduces the drying time.
2. The berries are separated from the spikes and dried in the sun for 7-10 days.
3. When dried, the berries retain the characteristic wrinkled appearance of black pepper of commerce.

Introduction

Maize (Zea mays, or corn as it is known in some countries) is the principal cereal crop in tropical and subtropical regions throughout the world. The increasing use of maize as a staple food reflected the much higher yields per hectare, compared with wheat, rye and barley. Because maize was cheap, it became the dominant food and main source of dietary energy and protein for poor people, particularly those in rural and underprivileged segments of society. Maize is considered to be a native of the Americans. There are different views about the introduction of maize in India. One view is that maize was introduced into India by the Portuguese during the seventh century. Other view is that maize was introduced in Pre-Colombian era through the Atlantic Arabian trade route. This is supported by the more recent variability that has been observed in the maize collections made from the north eastern Himalayan region. However, the historic records regarding the cultivation of maize in India date back only to the Maratha Empire.

I. INTRODUCTION

Horticultural crops include fruits, vegetables, flowers, plantation crops, spices, and medicinal and aromatic plants have emerged as a major economic activity in India. It contributes 30% GDP from 11.73 % of its arable land area. Horticulture crops cover over 23.4 million hectares of area, which is approximately 12.7% of the total gross cropped area of the country and contributes 18-20% of the gross value of India’s agricultural output (NHB, 2013). India is the world’s second largest fruit and vegetable producing country accounting for 77.7 million metric tonnes of fruit and 159.5m M tonnes of vegetables (NHB, 2013). Besides, about 5.66 million tonnes of loose flowers, spices, mushroom and aromatic plants are also produced. The country produces 41% of world mangoes, 23% banana, 24% cashew nut, 36% green peas, 10% onion and 30% cauliflower and accounts for 12% of world fruit and 13.25% of vegetable production (NHB, 2013). Owing to wide diversity of agro climatic conditions, almost all types of temperate (apple, peach, plum, apricot, cherries and nuts), subtropical (mango, guava, papaya, etc), tropical (banana, pineapple etc), arid fruit (ber and aonla), plantation crops (coconut, cashewnut and arecanut) and diverse variety of vegetables are grown in India. The export of fresh fruit and vegetables from India in 2006-07 was estimated at 9.84 Lakh tonnes valued at Rs 2411.70 crores. Mango, grapes, apple, onion, potato, green vegetables like okra, bitter gourd and green chillies were the major items of export. Similarly, India exported 5.97 Lakh tonnes of processed foods comprising of mango pulp, juices, concentrates, dried and processed vegetables, pickle and chutney, alcoholic and non-alcoholic beverages worth Rs 2818.1 crores (APEDA, 2012) (Table 1 to 3).

I. INTRODUCTION
Horticultural crops include fruits, vegetables, flowers, plantation crops, spices, and medicinal and aromatic plants have emerged as a major economic activity in India. It contributes 30% GDP from 11.73 % of its arable land area. Horticulture crops cover over 23.4 million hectares of area, which is approximately 12.7% of the total gross cropped area of the country and contributes 18-20% of the gross value of India’s agricultural output (NHB, 2013). India is the world’s second largest fruit and vegetable producing country accounting for 77.7 million metric tonnes of fruit and 159.5m M tonnes of vegetables (NHB, 2013). Besides, about 5.66 million tonnes of loose flowers, spices, mushroom and aromatic plants are also produced. The country produces 41% of world mangoes, 23% banana, 24% cashew nut, 36% green peas, 10% onion and 30% cauliflower and accounts for 12% of world fruit and 13.25% of vegetable production (NHB, 2013). Owing to wide diversity of agro climatic conditions, almost all types of temperate (apple, peach, plum, apricot, cherries and nuts), subtropical (mango, guava, papaya, etc), tropical (banana, pineapple etc), arid fruit (ber and aonla), plantation crops (coconut, cashewnut and arecanut) and diverse variety of vegetables are grown in India. The export of fresh fruit and vegetables from India in 2006-07 was estimated at 9.84 Lakh tonnes valued at Rs 2411.70 crores. Mango, grapes, apple, onion, potato, green vegetables like okra, bitter gourd and green chillies were the major items of export. Similarly, India exported 5.97 Lakh tonnes of processed foods comprising of mango pulp, juices, concentrates, dried and processed vegetables, pickle and chutney, alcoholic and non-alcoholic beverages worth Rs 2818.1 crores (APEDA, 2012) (Table 1 to 3).

The basic processing and preservation techniques such as canning, freezing, dehydration, salting, pickling and freeze drying are designed to change perishable foods into more usable form and prevent undesirable changes caused by microorganisms, or by chemical, physical and biochemical reactions in the food itself. Hence an ideal processing technology would involve prevention of growth of microorganisms and at the same time retention of f lavor, texture, nutritive value and palatability of the products.

Processing and Preservation

Processing and preservation is the best way of utilizing surplus production of fruits during seasonal gluts.

Milk is a highly perishable commodity. The shelf life of raw milk is in hours. In order to harness its full potential for the well being of the humanity, it is essential to extend its shelf life not only in days but also in months and years. This can be achieved by judicious application of processing and preservation technologies.

Preservation is any purposeful treatment or processing of a food which prevents spoilage and extends the shelf life of raw material to a longer than its natural keeping quality.

During storage and distribution foods are exposed to a wide range of environmental conditions. Environmental factors such as temperature, humidity, oxygen and light can trigger several reactions that may lead to food deterioration. As a result foods may be altered to such an extent that they are either rejected by the consumer or are harmful to the person consuming them. It is, therefore, essential that the good knowledge of different reactions that cause food deterioration is gained prior to understanding the principles of food preservation.

The deterioration in foods may be caused either due to internal or external chemical or microbial reactions occurring in milk. The changes may be either latent to senses of consumer, or they may be discernible by the human senses. The consumer cannot perceive latent changes visually, olfactorily or otherwise, and laboratory measurements are the only method to detect them. Still the nutritional value of such materials may be seriously impaired. Such changes include fermentation, oxidation of lipids, loss of vitamins and changes in the contents and composition of nitrogenous substances.

Non-microbial changes in foods, perceptible to human senses, may often lead to serious deterioration noticeable to the average consumer. These include discolouration and changes in odor, taste and consistency. Microbial changes may result in alteration of original properties of milk making it unfit for further processing, deterioration in flavour quality, loss of nutrients and toxin production.

Introduction

Fruits and vegetables are an important supplement to the human diet as they provide the essential minerals, vitamins and fibre required for maintaining health. For various reasons, this abundance of production is not fully utilized and about 25-30% of it is wasted due to spoilage. Most of fruits and vegetables are seasonal crops and perishable in nature. In a good season there may be a local glut, particularly of fruits, but because of insufficient transport facilities and poor availability of packing materials, the surplus cannot be taken quickly enough to the natural markets in urban areas. Moreover, the surplus often cannot be stored for sale in the off-season because of inadequate local cold storage facilities. Thus the growers do not get a good price for their produce because of the glut and some of it is spoiled resulting in complete loss.

Fruit trees like ber, aonla, jamun, tamarind, custard apple, bael, lasora, phalsa, ker, pilu, etc well suited for arid environment, remained under exploited owing particularly to lack of appreciation of their quality as fruits, their economic potential and above all due to non-availability of the needed technology for their profitable cultivation. Because of their curative properties, these fruits have been used in Indian system of medicine such as Ayurvedic and Unani since time immemorial. Apart from their nutritive and medicinal values, quite a few of these underutilized fruits have excellent flavour and very attractive colour. In spite of these quality attributes, most have not undergone any conscious phase of domestication and human selection. Their cultivation is very restricted and they grow mainly wild. Being tolerant to biotic and abiotic stresses, these fruit species are suitable for growing in the disaster- and drought-prone areas.India has a rich heritage of indigenous fruit types. Significant advances have been made in recent times towards providing technology support for their cultivation.

Introduction

It is the process of retaining food over a period of time without being contaminated by pathogenic organisms or chemicals and without losing its colour, texture, flavour and nutritious value. It involves preventing the growth of bacteria, fungi and other microorganisms, as well as retarding the oxidation of fats which causes rancidity

Objective

• To increase its shelf life, retaining original nutritional values, colour, texture, and favour.

A biological sample received in the laboratory should be processed as below:

Fresh Green Sample: During metabolism trial period it is always advisable to take a sample of fresh green fodder daily so as to  avoid chemical composition variation from place-to-place in a field. Take about two and half kilo sample from the bulk, cut the whole plant including the stem and stalks with a pair of scissors into small pieces and mix thoroughly. Weigh about 100g accurately in the aluminium tray 23156cm approximately for estimation of moisture. It is always recommended to weigh the sample immediately in the laboratory so as to avoid the losses of moisture.

Introduction

GIS (Geographical Information System) based mapping takes cogence of three major geometrical dimensions, point, line and polygons and in GIS these three features correlate their relationship through a concept called Topology. Among the various applications where covariate processing requires specific attention, the landuse/ land cover and Digital Elevation Models/surfaces or terrains are the major area of interest. Use and processing of data for these covariates carries importance as accuracy of both these aspects would influence the derivatives extracted out of them further. For example, if landuse is improperly defined, the site for which planning is proposed may not sustain, similarly, point data/elevation data in case of DEMs would decide the exact topography of any landforms for their further utilization. For their use in GIS, while DEMs depend upon point data, the landuse/ land cover will be taken care by polygons. For the purpose of the study, we are going to discuss about these two covariates in the following paragraphs.

Generally, Covariate (covariable) (koh-vair-iãt) in statistics is defined as a continuous variable that is not part of the main experimental manipulation but has an effect on the dependent variable. In other words, as per ANCOVA (Analysis of covariance) definition: a covariate is a control variable.

Vegetable seed cleaning and processing are two important aspects of seed post-harvest management. These steps are very essential to maintain the quality of the seed till its next sowing season. The quality of seed produced is dependent on the moisture content and various admixtures. To provide quality seed to farmers, it is very essential to clean seed to its maximum quality. The seed quality attributes like moisture, free water activity, to be controlled in germination, vigor and viability are upgraded during seed cleaning.

Seed cleaning is the term used as a part of processing means separation of admixtures from a particular seed lot. The physical characters like bigger clods, sand, soil, chaffy material, inert matter etc. will be removed during seed cleaning. Seed processing on the other hand is relatively broad term referring to the process of removal of dockage in a seed lot and preparation of seed for marketing is called seed processing. The price and quality of seed is inversely related to dockage, which should not exceed a maximum level permitted for different crops for seed certification. Due to the operation of processing the level of heterogeneity of seed lot gets narrowed down. The heterogeneity occurs in a seed lot due to following reasons:

Stomach and intestines are important part of animal body.  Stomach mainly constitutes rumen, reticulum, omasum and abomasums. In which rumen, reticulum and omasum are utilized in form of edible uses, petfood and meat meal while abomasums can be converted into petfood and meat meal but abomasums of suckling calf can be utilized in extraction of rennet. Sheep rumen can also be utilized as haggis casings and pig stomach can be processed as petfood, pepsin, haggis casings and chitterlings. Organic content obtained from stomach and intestines can be utilized in form of compost, fertilizer and sometimes as feed. Intestine is also constitutes large intestine (colon, caecum and rectum), small intestine and oesophagus. In which large intestine and small intestine if not in condition to convert in casings can be utilized by rendering in form of meat meal.

ABSTRACT

Banana plants areextensively known for their fruits butby-products (pseudostem, root, leave, male banana flower, and banana peel) from banana farms also have potential applicability because recycleprocess of these wastes can convert waste of banana farms into an outstandingresource of valuable raw materials for other industries. This practice avoids huge losses of unused biomass and environmental hazards. Banana flowers are discarded in banana farms during the harvesting of banana fruit bunches and produce a great amount of agricultural waste. Consumption of banana flower as a vegetable is trendy in some parts of Asian countries but the cleaning process of banana flower is an unwieldy practice because of the time and the laborengaged in separating the calyx and the pistil portion of these flowersbefore processing. Itis an abundant source of well-balanced essential amino acids, unsaturated fatty acids, dietaryfiber, vitamins, minerals,and flavonoids. This flower also having tremendous medicinal properties as they possess several secondary metabolites. Thepresent review discusses the transformation of this agricultural waste into a different value-added product. The transformation of banana flowers into highly commercial outputs can be beneficial forsupplementary income to small scale farming industries.

Keywords: Banana, Banana flower, By-product, Value-added product, Antioxidant, Pre-treatments, Processing.

Yogurt is a fermented milk product that contains the characteristic bacterial cultures such as Lactobacillus bulgaricus and Streptococcus thermophilus. All yogurts must contain at least 8.25% solids not fat.

17.1. Introduction

Tea (Camellia sinensis L), coffee (Coffea arabica L.) and rubber (Hevea brasiliensis) are known as estate crops or conventional plantation crops. These plantation crops are perennial in nature and cultivation of these crops generates considerable employment opportunities during on farm and off farm processing activities. The plantation crops are high value industrial crops contributing about 25% of AGDP. India is a largest consumer of tea accounts for 22% global tea consumption and also accounts for one-fifth of global tea area. Indian coffee industry also have prime place among plantation crops and also contributing 4% coffee to global market. Similarly, rubber plantations also provides basic raw material to toys, balloon, tyres, seed oil cake and rubber wood factory. The plantation crops along with main processed products also produce large quantity of biomass like husk, coir dust, coffee husk, tea waste, shedding etc which can effectively used to reduce nutrient requirements of crops. Parchment coffee prepared by using the wet method is generally favoured by the market. Cherry coffee, due to its very nature of preparation and longer contact with the mucilage and fruit skin, is usually associated with a characteristic fermenting flavour.

Processing of fruits  and vegetables into various products which could be preserved for a long time and add to value of product using proper cost effective technology will be a viable tool for improving   economic status of  farmer as well as our country. Modern methods of fruit and vegetable preservation are  broadly classified as follows:

Introduction

Consumers are nowadays very much concerned about the food they purchase and consume. Consumer wants the food containing antioxidant properties or can say functional food in safe and stable forms, so that the availability of daily requirements of functional food ingredient must be ensured for normal growth and development of the body. The functional food that can provide a health benefit such as increased dietary fibre, vitamins or minerals to the body. The incorporation of antioxidant compounds acts as an efficient way to fight against reactive oxygen species (ROS) generated in our body. As it is already known that the ROS causes oxidative stress and acts as a main trigger for different life threatening chronic diseases like cancer, diabetes, cardiovascular disease, aging etc. Therefore, seeing the consumers’ demand for value added products with bioactive ingredients, all small and large scale food industries are taking initiatives to process different types of food (fruits, vegetables, dairy, sea food, animal, microbial products etc.) to extract and purify its active fraction of functional ingredients to valorize different value added products. Functional ingredients may also be derived from different food wastes generated during processing of food. This practice provides additional economic benefits to food businesses. Food industries are also giving importance to different processing methods to extract high quality of functional food ingredients in large quantity because processing method affects the concentration of extracted bioactive compounds. The simple addition of functional ingredients may cause an unwanted and negative change of sensory and texture of food. Therefore, using novel processing technologies such as microencapsulation, the negative changes could be minimized or avoided because these technologies could prevent the inactivation of bioactive ingredients.

Abstract

The objectives of the study is to help to create self-employment and provide proper information for different conventional milk based products. Traditional dairy foods have always played a crucial role in preservation of precious milk nutrients and promotion of its use among masses. The demand for milk and milk products is increasing with increasing of world's population. To meet these needs, high-end technology is needed for emerging the capability of milk production and preserving it by producing high quality milk products. The dairy industry is highly localized owing to perishable nature of milk products. Approximately 50% of the total milk produced in India has been projected to be processed into a variety of conventional milk products, such as khoa, chhena, paneer, dahi, ghee, kalakand and a wide range of sweets in rural areas mostly by the rural citizens. Therefore, setting up a milk-based food production system and updating conventional technologies to manage milk-based products on a commercial scale is very important.

Processing

On arrival in the laboratory, the specimens are processed immediately or refrigerated until processed. For inoculation into animal/cell culture/embryonated eggs (EE), swabs are shaken in fluid medium, faeces are dispersed in fluid medium and tissue specimens are homogenized in a high speed blender/pestle and mortar with the help of an abrasive like powdered glass or sand. Good quality hard sand should be properly washed in distilled water, treated with HCl, washed thoroughly, dried and sterilized before use. Generally the infective tissue is homogenized in a few ml of buffer usually having a pH of 7.2 to 7.3 to make about 10% tissue suspension. The suspension is centrifuged at about 1000g for 10-15 minutes to sediment the tissue debris and coarse materials.

5.1 Introduction
The process of milk processing entails the transformation of liquid milk into dairy products, including pasteurised liquid milk, yoghurt, butter, cheese, and ghee. The following are the rationales for processing: There are numerous benefits to processing milk, including the ability to access distant markets, the extension of the product’s storage life, and the attraction of higher prices because of its enhanced transportability. Furthermore, processed products are less cumbersome and lighter, which facilitates transportation. The refining of milk improves its quality and hygienic safety, enabling the production of a variety of milk products, including cheese and liquid milk, to satisfy the diverse needs of consumers. Additionally, the processing industry contributes to economic development by creating employment. Small-scale processors are capable of producing a wide range of dairy products. Before determining which dairy products the group will produce, it is recommended that a comprehensive market/feasibility study be conducted. Milk products can be processed in the manner depicted in the image.

FRUIT TOFFEES

Fruit toffees can be prepared from different fruits like apricot, plum, apple and other fruits. Concentrate the fruit pulp to about half of its volume by cooking with sugar and other ingredients. Milk powder should be added in the form of paste. Heavy stirring is required till it hardens enough on cooling.

16.1. Introduction

Plantation crops are high value industrial crops grown in the tropics play a vital role in agricultural economy and export trade of developing countries. Plantation crops have great potential for utilization of waste land like rainfed dry land, hilly, arid and coastal areas to provide nutritional security, earn foreign exchange and to ensure livelihood security. The major plantation crops grown in India are tea (Camellia sinensis L), coffee (Coffea arabica L.), rubber (Hevea brasiliensis), coconut (Cocos nucifera), arecanut (Areca catechu L.), oilpalm (Elaeis guinensis), cashewnut (Anacardium occidentale L.), cocoa (Theobroma cacao L.) and cardamom (Elettaria cardamomum). India is the leading producer of most of these plantation crops. Among all fruit crops, the processing plays an important role in plantation crops as they are generally consumed only after processing. In addition to primary products which are exported largely, some by-products from these crops also have industrial as well as commercial uses. Coconut, arecanut, cashewnut, black pepper and cardamom are known as small holder plantations whereas, crops like rubber, tea and coffee are known as estate crops or conventional plantation crop. Coir, wood and shell from coconut, leaf sheath in arecanut, cashew nut shell liquid (CNSL) and feni from cashew are some of by-products with a great impact and demand in the market.

44.1. Aim

To conduct practical on processing of tea and coffee.

44.2. Theory

Tea is an evergreen woody perennial grown in many Asian countries including China, Japan, Java, Sumatra and India. The plant produces dark green, small shiny leaves with white blossom. In post harvest and manufacturing practices for tea, only mechanical and physical processes are allowed with natural fermentation. It can be manufactured by orthodox, CTC (crush, tear and curl) processing.

Coffee is an important beverage used all over the world. Brazil and Columbia are the largest coffee producers in the world. Coffee is harvested in one of two ways; strip picking (entire crop is harvested at one time either by machine or by hand); selective picking (only the ripe berries are picked individually by hand) during dry season when cherries are bright red, glossy and firm. After picking, the coffee can be prepared either by dry method which produces natural coffee or by wet method which produces washed coffee.

Introduction
Plantation crops are high-value industrial crops grown in the tropics and coastal areas. They have great potential for utilization of wasteland like rainfed dry land, hilly, arid, and coastal areas to provide nutritional security; earn foreign exchange, and ensure livelihood security. The major plantation crops grown in India are tea (Camellia sinensis L), coffee (Coffea arabica L.), rubber (Havea brasiliensis), coconut (Cocos nucifera), areca nut (Areca catechu L.), oil palm (Elaeis guinensis), cashew nut (Anacardium occidentale L.) and cocoa (Theobroma cacao L.). India is the leading producer of most of
these plantation crops. Among all fruit crops, processing plays an important role in plantation crops as they are generally consumed only after processing. In addition to primary products, some by-products from these crops also have various commercial uses. Coconut, areca nut, cashew nut, black pepper, and cardamom are known as smallholder plantations whereas, crops like rubber, tea, and coffee are known as estate crops or conventional plantation crops. Processing aspects of some of these crops are discussed here:

Aim of the Experiment: The composite soil samples, collected, are air-dried and processed before analysis in the laboratory.

The processing of wool encompasses multiple stages that convert raw fleece into functional fabric or yarn. Each phase in the wool processing procedure is vital in influencing the ultimate quality and appropriateness of the wool product for diverse uses. Below is a concise overview of the steps involved in wool processing:
1. Shearing or pulling
2. Skirting
3. Washing or scouring
4. Carding
5. Combing
6. Spinning
7. Dyeing
8. Weaving and knitting
9. Finishing
10. Packaging

The potato (Solanum tuberosum L.) is one of the four most important food crops of the world, the other three being rice, wheat and maize. It is a high yielding and nutritive crop and produces highest dry matter, carbohydrates, edible protein, minerals and vitamin C and B per unit of area and time. In view of the shrinking cultivable land area and increasing population of India, the potato has a high potential to solve the problems of hunger and malnutrition in our country. But, potato is a perishable commodity and its harvest time (February/March) in Indo-Gangetic plains (which account for nearly 87% of the country’s potato production) coincides with steep rise in ambient temperatures. From April onwards, temperatures start shooting up and the produce has either to be consumed within a short period of time or is required to be preserved in the cold stores. Due to inadequate, expensive and unevenly distributed refrigerated storage facilities in the country, there have been frequent gluts in the market causing substantial economic losses to farmers and wastage of precious food. Such gluts occur every 3 to 5 years. The glut years are followed by a reduction in potato area and production leading to high potato prices in alternate years which again encourage farmers to increase potato area in subsequent years resulting again in a glut situation and price crashes. This boom and bust cycle has thus continued for long (Pandey et al., 2009).

Introduction

Agricultural production is necessary to fulfil nutritional requirements for human populations and global food security. The agricultural sector also forms the economic backbone of many low-income countries in which millions of farmers are employed (Anushka et al, 2022). However, managing agricultural production to achieve multiple objectives of providing food, supporting livelihoods and protecting biodiversity and forests is a challenge especially in tropical, low-income countries (Anushka et al, 2022). Usually, the growth in global agricultural production is largely driven by commercial and export oriented commodities. One such agricultural commodity that has high global demand is cashew (Anacardium occidentale L.). Cashew is presently cultivated in 33 countries including India in the world. Global land area for cashew cultivation between 1980 and 2018 has seen an eleven-fold increase from 526,250 ha to 5,972,724 ha (Anushka et al, 2022).

Coconut, arecanut and palmyrah, which hold significant cultural and historical importance in India, have been the primary focus of cultivation efforts. Cocoa, a relatively recent addition to India, serves as a companion crop to coconut and arecanut, contributing to the economic well-being of farmers nationwide. However, the current situation emphasizes the crucial role of value addition and product diversification in stabilizing prices. Despite the initial stages of value addition in India’s palm crops, recent innovations and established value chains have the potential to empower farmers as entrepreneurs, thereby augmenting their income. Moreover, the value-added products from these palms have enormous export potential. This chapter explores the advancements in value-added products and the diversification of coconut, arecanut, palmyrah, and cocoa, providing insights into opportunities for cottage or small-scale industries.