eChapters

INTRODUCTION

Jamun (Syzygium cumini (L) Skeels Syn Eugenia jambolana Lamk.) is an important commercial indigenous minor fruit of India and is highly suitable for avenue and for social forestry plantation. It belongs to family Myrtaceae. The other major plants belong to this family are eucalyptus, bottle brush and cloves. It is known by different names like black plum, Indian black berry, Ram jamun, jambolan, Jambul and Phalinda in different parts of country. Trees are found growing throughout the tropics and subtropics as an avenue plantation on road side, school, religious places and as wind break around the orchards. It is also occurs in the lower range of the Himalayas up to an elevation of 1,300 meters and in the Kumaon hills up to 1,600 meters above mean sea level. It is widely grown in the larger parts of India from the Indo-Gangetic plains in the North to Tamil Nadu in the South. The importance of this fruit is increasing day by day due to increasing awareness of hypoglycemic properties of this fruit against diabetics. It is adequately rich in antioxidants.

INTRODUCTION

The European plum (Prunus domestica L.) is the most important plum species grown in different countries in the world. The Japanese plum (Prunus salicina Lindl.) is the next important species grown in many Asian countries. It is more vigorous, productive, precocious in bearing and more resistant to diseases than the European plum. The Japanese plum a temperate fruit is unique amongst the stone fruits. It is a strong small growing tree, performing well as major crop of hills and considered as important minor fruit crop in north India. Its low chilling varieties comes into the market when the other crops are scarce and find little competition in the market. The fruit growers are now preferred to grow Japanese plum on account of giving higher yield and excellent return per unit area. It is successfully grown in temperate zone and subtropical climate of northern Indian states. Moreover, it is preferred as filler tree in permanent orchards of mango, litchi and pear. It start bearing after 2-3 years of planting and giving good economic return to the growers during pre-bearing period of permanent fruit crops.

INTRODUCTION

Persimmon is a subtropical fruit, originated in China and popular in Western countries. It is the national fruit of Japan. However, only four species are cultivated viz., Diospyros kaki L., Diospyros lotus L., Diospyros virginiana L. and Diospyros oleifera Cheng. Persimmon resembles ripened tomatoes, thus it attract the consumers. The ripe fruit is sweet and has admirable flavor.

NUTRITIVE AND CULTURAL SIGNIFICANCE

Persimmon fruits contain 79 per cent water, 0.7 per cent pectin, 0.4 per cent each of protein and crude fibre per 100 g. They are also rich in vitamin A (2710 IU) and vitamin C (11 mg of ascorbic acid). There are two types viz., astringent and non- astringent cultivars, astringency is due to water soluble tannins (kaki- tannin) present in the flesh of fruit and the level falls down at maturity stage and in non astringent types it completely disappear at maturity.
Fresh persimmon fruits are used in certain dishes, in jelly, jam and fruit peel/ skin is added to pickles for imparting orange colour. Dried kaki is a traditional dessert in New Year festivals especially in Japan. Tannin is used as a mordant for protecting wood, as an antidote against snake venoms and as a control agent for viral infections in plants.

INTRODUCTION

Insects are the major group of arthropods and the most diverse group of animals across the Earth. Though some of them are beneficial to environment and to humans, many insects are considered as pests as they transmit diseases and damage the crops and forests. Chemical, biological, cultural and mechanical methods are being used to eradicate, control or manage these pests. The main strategy used for controlling pests has been the use of chemical pesticides because of their long residual action and wide spectrum toxicity (Casida and Quistad, 1998). However, the indiscriminate usage of chemical pesticides are toxic to mammals, birds and fish, also pollute the environment, besides the development of pest resistance and the emergence of secondary recalcitrant insect pest populations (Li et al., 2007). These negative impacts prompted the change of strategies in managing the pests by resorting to ecofriendly and cost effective pest control strategies (Ferre et al., 1991). 

10.1. INTRODUCTION

The development of hybrid breeding methodology in maize and its successful application to exploit heterosis is considered as significant achievement of plant breeding in the present century. 
Even though Beal (1880) suggested for commercial cultivation of F1 varietal hybrids. It was Shull (1909) on the basis of his experiment gave pure line method of corn breeding, which laid foundation for present day hybrid breeding. Pure line methods of maize breeding involve three steps. 
    
·    Large scale inbreeding to obtain many homozygous/nearly homozygous inbred lines. 
    
·    Testing the selected inbred lines in all possible crosses.
    
·    Practical utilization of inbred lines in seed production of single cross hybrids.

15.1. INTRODUCTION

Finger millet Eleusine indica (L.) is an Old World cereal grass commonly known as ‘finger millet’, is one of the staple food crop especially in India and Africa, which is widely grown in the arid regions of Asia and Africa and important minor millet grown in India.  Eleusine, the generic name, is obtained after the “Eleusine” the Greek Goddess of cereals and the common name finger millet is derived from the finger like branching of the panicle. It is also know by Goosegrass, Yardgrass, Wiregrass, Silver Crabgrass, Crowfoot Grass. It is commonly known as Finger millet in English, Kelvaragu in Tamil, Nachani in Marathi etc. Some Indian varieties of finger millet are Kempu ragi, Ragalli shivalli, Pichakaddi etc.  This crop is one among the hardiest crops which can with stand severe drought conditions and can also grow well under scanty rainfall condition. However with good irrigation facilities the yield of finger millet matches with crops like rice. Finger millet seeds remain free of pests and insects for a long duration extending up to 50 years hence serving as a food reserve in case of tough situations like famine.

17.1. INTRODUCTION

Yam bean is one of the adaptable, low-maintenance, and nutritious food crop grown in moderate soil. It has many synonyms, in India it is known as Mishrikand (Hindi), Keshar or Ram-kaseru or Shankalu (Bengali). The root crops produced by legumes have long recognized as important and the FAO (1979) has recommended them as a source of human nutrition. The tuber is rich in starch (15-20%), 3-4% sugar, and have considerable amount of protein (2-3%). The harvested crop keeps well for months under ambient temperature. Kale (2006) observed relatively high iron contents in storage roots (up to 130 mg/kg of storage root dry matter). It can also be used for alcohol production.

The crop is very hardy, resistant to common insect pests and diseases. Most important is that the crop is not grazed neither by goats nor cows. The crop grows well in hot-humid environment and requires long, warm frost-free growing season. A moist, light textural soil is preferred for production of tuberous roots. As a legume crop, it can be grown without nitrogen fertilizer. Under good growing condition its root nodules habour symbiotic colonies of nitrogen-fixing bacteria- Rhizobium spp. (Nielsen et al., 1998b). A season crop of yam beans can release as much as 53 tons of usable nitrogen per acre into the soil. Mycorrhyzae also associated with the crop, thus facilitating phosphorus uptake. Thus, yam bean is highly suited to the needs of small farmers, and from both an ecological and a socioeconomic perspective

Key facts

    
•    The use of chemicals has many benefits, however, there are potential risks that some of these chemicals may cause harm to organisms and human health if they enter into the environment.
    
•    Harmful chemicals are those chemicals which are persistent, bio-accumulative, as well as toxic (PBT). 
    
•    Environmental or ecological risk assessment (ERA) consists of hazard identification, effect assessment, exposure assessment, risk characterization, risk classification, risk-benefit analysis, risk reduction and monitoring.
    
•    The five types of environmental monitoring are: chemical monitoring, bio-accumulation monitoring, biological effect monitoring, health monitoring and ecosystem monitoring. 
    
•    An integrated monitoring program is a coordinated monitoring activity comprising of both chemical and biological measurements in a variety of environmental compartments. There are four different monitoring levels in an integrated ERA, these are: suborganismals (biomarkers), organisms (bioassays), populations (bio-indicators) and ecosystems (ecological indicators).

Introduction

The major environmental issue of global nature is increasing green house effect, which is warming earth. Enhanced green house effect is mainly due to increased emission of carbon dioxide, methane, nitrous oxide and CFCs. Because of the increasing concentrations of these greenhouse gases, there is much concern about future changes in our climate and direct or indirect effect on agriculture (Arora et al. 2011). Increases in atmospheric concentrations of green house gases and additional anthropogenic perturbations of the climate system affect the spatial and temporal distribution of weather regimes which contribute to shaping the diversity of agricultural activities throughout the world (Havlik et al. 2015). Consequences of changing climatic attributes such as rainfall, moisture regimes, temperature etc. affect qualitative and quantitative production of agricultural crops as well as livestock population by altering pasture quality and yield (Thornton et al. 2009). In the context of climate change mitigation, now a days adoption of climate smart agriculture work as an effective practice.

Introduction

Agriculture has always been vulnerable to fragile environmental conditions of dry areas, where droughts of varying amplitude and frequency influenced by insufficient and uncertain rainfall are common features. Recent anthropogenic activities have accelerated the rate of green house gas (GHGs) accumulation in atmosphere influencing atmospheric temperature and local patterns of temperature and precipitation, which ultimately affect agricultural production and food securities. About 35.5 percent of the total world’s population resides in dry areas, which is facing the problems of land degradation and food securities.

Introduction

A number of researchers have used morphological descriptors such as growth habit, leaf, shoot, flower, fruit morphology to classify and discriminate different varieties/cultivars and or detect inter and intra-specific variations in different tree species of economic importance (Saran et al. 2006; Holland et al. 2009). Such morphological descriptors are quite homogenous and often found insufficient to distinguish varieties within morphological groups. The choice of suitable cultivars is of paramount importance for its success. The lack of breakthrough has been due to under utilization of genetic variability for superior quality and high yield potential. Most of the fruit tree species demonstrates a rich genetic diversity mainly through natural cross pollination due to self incompatibility (Godara 1980). The elite plant types with desirable traits have been released as varieties, mass multiplied and propagated through standard vegetative multiplication. However, the authenticity of cultivar identification remains unclear (Devanshi et al. 2007).

India, as a developing country has reasons to be concerned about the adverse impact of climate change on its economy. A large part of its population depends on climate sensitive sectors for livelihoods which makes it highly vulnerable to climate change. Climate change can have serious impact on its crops, forests, coastal regions, etc. which can in turn affect the achievement of its important national development goals. The issue of climate change cannot however be taken up without linking it to developmental needs such as poverty, health, energy access and education. Traditionally climate change experts have focused on mitigation measures, adaptation measures have also been acknowledged of late as effective and equitable means to deal with climate change impacts. Most of the mitigation measures are high in terms of technology and capital. Therefore, while developed economies choose to mitigate climate change by making heavy investments, developing economies choose to adapt (Monika and Hooda, 2018). There is increasing recognition that the world’s current progress on reducing greenhouse gas emissions is not occurring rapidly enough to avoid impacts from climate change in the coming century. Because of this, the world is “committed” to a certain level of global warming and therefore,

Climate change is one of the most important global environmental challenges facing humanity and as per the instrumental records, the earth’s climate system has demonstrably changed on both global and regional scales since the preindustrial era. Further evidence shows that most of the warming (of 0.1°C per decade) observed over the last 50 years, is attributable to human activities. The levels of greenhouse gases namely carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) have increased markedly as a result of human activities. The CO₂ concentration in atmosphere is now more than 400 ppm and the decadal increase is from 0.86 ppm per year to 1.99 ppm per year (Table 16.1) which is the highest ever. The Intergovernmental Panel on Climate Change (IPCC, 2007) projects that the global mean temperature may increase between 1.4 and 5.8 oC by 2100. This warming of the earth-atmosphere system is expected to have severe impacts on the global hydrological system, ecosystems, sea level, crop production and related processes. Agriculture sector is the most vulnerable entity in light of the global warming and its impacts.

The State of Himachal Pradesh encompasses a geographical area of 55.7 lakh ha and is situated between 31°22’40" and 33°12’40"N latitude and 75°45’55" and 77°10’20"E longitude. The state is bordered by Jammu and Kashmir on the north, Punjab on the west, and Haryana on the south-west (Fig. 19.1). About 12 per cent of the state area is under agriculture which is mostly (80 per cent) rain fed. Wheat, maize, rice, and barley are the principal crops. In state, there are 12 districts, viz., Bilaspur, Chamba, Hamirpur, Kangra, Kinnaur, Kullu, Lahaul & Spiti, Mandi, Shimla, Solan, Sirmaur and Una. About 20 per cent of the area is under forest cover. It is rich in biodiversity of flora and fauna. Nearly 27 per cent of the area of the state is covered under permanent pastures. The state is endowed with a wide range of physiography/landform, climate, vegetation and geology which have influence on genesis of soils. The soils are mostly shallow, medium deep to deep, well/excessively drained, sandy, sandy-skeletal, loamy-skeletal, coarse-loamy and fine-loamy, calcareous as well as non-calcareous with low available water capacity. The State is the biggest montane ecosystem in India situated in northern part of the country. It is seventeenth largest state in terms of area and twentieth in population of which 65 per cent people are dependent on agriculture and 60 per cent of GDP comes from agriculture sector. Increasing temperature and reducing rainfall affecting the crop growth and crop production is a major issue everywhere in the world nowadays and this state has also not remained untouched by these prime issues of climate change. For sustainable development of agriculture in state, there was/is a need to identify and quantify climatic change where agriculture has a significant influence on both the economy and livelihood.

Introduction

Agricultural insect pests routinely disturb crop production, yet their effects are relatively minor compared to the economic disruption, Suffering, and death caused by medical pests. So, the medical pests compose an extraordinarily important group of insect pests. Insect pests of public health importance had a remarkable impact on human history and this influence still continues (Higley et al., 1989). Diseases carried by insect are prevalent in many parts of the world, particularly the tropical and subtropical countries. These organisms have the capacity to inflict injury, disease, discomfort, or distress. They may cause direct illness and suffering through stings and bites, infested wounds, or allergic reactions. They may feed on blood or body tissues and thus may also transmit deadly pathogens or parasites. Economic losses associated with these pests are borne not only by the affected individuals and their families, but also by human society in general (Higley et al., 1989).

Evidence over the past few decades has conclusively established that significant changes in climate are taking place worldwide as a result of enhanced anthropogenic activities. The fast pace of development and industrialization and indiscriminate destruction of natural environment, more so in the last century, have altered the concentration of atmospheric gases that lead to global warming. The major cause for climate change and global warming has been ascribed to the increased levels of greenhouse gases (GHGs) like carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O), chlorofluorocarbons (CFCs) etc. beyond their natural levels due to the uncontrolled activities such as burning of fossil fuels, increased use of refrigerants, and enhanced agricultural related practices.

Introduction

Increase in atmospheric carbondioxide (CO₂) and other green house gases viz. methane (CH₄), nitrous oxide (N₂O) and CFC (Chloro-Flouro- Carbon) due to fossil fuel burning, rapid industrialization and deforestation, which reduces the amount of earth’s radiation, that escapes to space. Role of these gases to change in climate over a longer period of time is the key issue of climate change. Climate change is a change in climate over time, whether due to natural variability or as a result of human activity (IPCC 2007).

IPCC :The UNEP (United Nations Environment Programme) and WMO (World Meteorological Organization) jointly established IPCC (Inter-governmental Panel on Climate Change) to assess available scientific information on climate change as well as to study its impact during 1988. Since establishment, IPCC has produced five major assessment reports. According to IPCC, climate change is defined as a movement in climate system as a result of internal changes within climate or interaction among its components. Frequency of extreme events (viz. heat waves, intense rain, floods, droughts etc.) are reported to follow increasing trend. Fig.1 is showing natural climatological cycle in the earth throughout different seasons as various components of climate system (IPCC 1996).

India has shown to the world that with 2.4 % of the land and 4 % of the water resources available at the global level, it can provide the food security to its millions. A record production of almost 265 million tonnes in 2013-14 is a testimony to the strides taken in the field of agriculture. However, the agriculture sector faces many new challenges in the future and climate change (global warming) is perhaps the most formidable one.

The new emerging demands of the relatively more-affluent Indian population, particularly its middle class, coupled with a net cultivated area unlikely to exceed 143 Mha in 2050 as well as an estimated rainfed agriculture to cover around 45 % of the net sown area, are further compounded with the harsh reality that highly productive agricultural land is being continuously lost out to the industry and urban sectors. How will the country meet the target of 400 Mt of food grain production is the mute question, in a situation where natural resource base is continuously degrading and climate change with its attendant impact is adversely affecting the agricultural production system (Singh, 2014).

Introduction

Global food production, already under the credit crunch, must double by 2050 to level off hunger. According to the UN World Food Programme (WFP), this will be possible only if food security is given top priority. The food security has become a complex issue influenced by climate and non-climate induced stressors which operate independently or in combinations are tackled appropriately. This climate induced stress is further augmented by climate change which affects agriculture and food production in complex ways. It affects food production directly through changes in agro-ecological conditions and indirectly by affecting growth and distribution of incomes, and thus demand for agricultural produce. Climate change has emerged as a major challenge in achieving goals of sustainable agriculture. Climate change refers to any change in climate over time, whether due to natural variability or/and as a result of human activity (IPCC, 2007). Agriculture impacts climate change with greenhouse gas emissions, and is at the same time impacted by effects of climate change as well. Amongst elements of climate change, the most important relate to increasing uncertainty in availability of water due to increasing frequency of drought and/or excess water events resulting in uneven water availability over time and space. Drought is a normal, recurring feature of the climate in most parts of the world. Drought is defined as the absence of rainfall or supplemental irrigation for a period of time sufficient to deplete soil moisture and injure plants. According to USDA drought occurs when annual precipitation is 75 percent of normal, or monthly precipitation is 60 per cent of normal. Drought stress results when water loss from the plant exceeds the ability of roots to absorb water and when the plant’s water content is reduced enough to interfere with normal plant processes.

Introduction

Ground water (GW) resources in most areas of world are shrinking at an alarming rate and may not meet the ever increasing demands from agriculture and industry in future. Large decreases in GW levels (up to 200 m in some places) have been observed due to over exploitation (Toze, 2006). It accounts for more than 65% irrigation water and 85% of drinking water supplies lies in a critical state. Many areas of the world, already experiencing stress on water availability, which placed severe strains on existing resources with resulting environmental impacts. Half of the population of the developing world suffers from at least one disease caused by insufficient water supply and sanitation.

Introduction

North Eastern Himalaya region of India comprises of the states of Arunachal Pradesh, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim and Tripura (Kukreti, 2000) lies between 21.5° N to 29.5° N latitude and 85.5° E to 97.5° E longitude. The total area of the region is 1,83,753 km2 thousand hectares of which about 9,729 ha (52.95%) is estimated to be under various type of forest including fallow land under regeneration in shifting cultivation with 220 different ethnic groups (Moral, 1997) and a total population of 1,01,39,990 (Table 1.) Northeast India is mountainous and a unique ethnic region with typical land tenure system with climate ranging from tropical to alpine type and altitudinal variation from 15 m to 5000 m amsl. Sustainable realizations of equitable livelihood in the region call upon conservation of bio-resources, environmental externalities, management of fragility and social sensitivities. Traditionally several niche based agroforestry systems of harmonizing woody biomass growth, crop production, livestock rearing and micro-enterprising have been evolved and indigenous technical knowledge generated to enhance income, employment and subsistence.

Recent increase in extreme climate events threatens disruptive impacts on both animal and agriculture (Battisti and Naylor, 2009). Climate change is a global phenomenon, but its negative impacts are more severely felt by the poor people in developing countries. Moreover, rural poor communities rely greatly for their survival on animal and agriculture which belong to the most climate-sensitive economic sectors. Climate change is expected to intensify existing problems and create new combinations of risks. The incidences of droughts, snow-storms and blizzard like events have increased rapidly. The situation has further worsened due to factors such as widespread poverty, over dependence on rain-fed agriculture, inequitable land distribution, limited access to capital and technology, inadequate infrastructure, long term weather forecasts and inadequate research and extension. The impact of climate change is expected to heighten the vulnerability of animal systems and reinforce existing factors that are affecting animal production systems in many parts of the world.

The United Nations Framework Convention on Climate Change (UNFCCC) defines Climate Change as a change the weather parameters attributed directly or indirectly to human activity, altering the composition of the global atmosphere. Human activity includes the pollution that arises from industrial activity and other sources that produce greenhouse gases. These gases, such as carbon dioxide, have the ability to absorb the spectrum of infrared light and contribute to the warming of our atmosphere. Once produced, these gases can remain trapped in the atmosphere for tens or hundreds of years.

Abstract

Abiotic stresses have been a serious challenge for sustainable agriculture particularly vegetable cultivation characterized by decreased endurance against stresses like drought, temperature fluctuation and salinity. In India, drought and salinity being major abiotic stresses affect an area of 16% and 4.28%, respectively. Plant Breeders have to face many impediments while developing stress tolerant varieties. Developing tolerant varieties is quite difficult as tolerance varies with the developmental stages and has complex inheritance. This can be understood well by studying ontogeny of plants. Drought varies in time of occurrence, severity and duration. Field screening for tolerance is very difficult because of various interactions like drought × high temperature, high temperature × salinity interactions etc. Artificial screening in different stresses could be an alternative approach. The varieties developed with higher inputs at research stations fail to perform at farmers’ fields due to high genotype × environment interactions. Cultivated species have less genetic variability for abiotic stress tolerance but tolerance can be enhanced by using diverse and heterogeneous population. Though wild species possess genes for tolerance but these genes are closely linked with the undesirable gene(s) e.g. in tomato where S. cheesmanii, S. peruvianum, S. pimpinellifolium and S. sitiens have undesirable traits which affect yield and quality adversely.

Introduction

The hills and mountains are one of the most important agro-ecosystems that supports life of half of the mankind either directly or indirectly. In India, hills are rich source of bio-diversity and possess enormous potential for sustaining agriculture, including horticulture and animal husbandry. The ecological fragility and vulnerability of the Himalayas to climatic aberrations, increasing demand for land to grow more food have been issues of concern for quite some time. Nearly 59% of the total work force in the Himalayas is engaged in subsistence agriculture which is barely enough to feed the growing population for 5-6 months in a year (Raizada et al., 2009). The North-West Himalayas (NWH) consisting of Jammu & Kashmir, Himachal Pradesh and Uttarakhand spreads to 33 million ha, habited by 25 million humans and 19 million livestock. Though, the whole economy of the region is based on agriculture, the total cultivable land is only 3.2 million ha of the total geographical area of the region (Srivastva et al., 2009).

Introduction

Development, refinement and adoption of machinery for a range of soil and cropping situations will be fundamental in any success to promote conservation agriculture systems. This chapter reports on the performance of machinery for minimum/zero tillage, bed cultivation system and crop residues management in different cropping system and outlines the need for continuing efforts. Particularly, the focus will be on developing equipments/implements for fixed path / controlled traffic to minimize the ill effects of wheels in the longer terms.

Introduction

Crop regulation is also known as flowering/ fruiting cycle management. It can also be termed as management of vegetative-reproductive balance. Some of the fruit crops bloom throughout the year without any resting period and produces two or three crops (bahar) in a year but yield and quality is not so good in all crop harvest. It is very essential to understand the flowering and fruiting behavior of crops and which bahar will give good crop with considering all the factors associated with a particular bahar. It is important for the available time to be partitioned to give an appropriate balance between the making of sources of resources which capture and utilized resources efficiently in generating harvestable yield and the filling of sinks for resources; and sink must mature in desired time for harvest. Apart from their importance in the determination of crop yield

Introduction

Pests and diseases are very serious issues in vegetable crops and account for nearly 25-30% damage to the expected yields across different crops inspite of high amount of chemical use. Excessive reliance on chemicals has created problems of pest resistance to pesticides, decimated useful fauna and flora as well as imperilled the delicate ecological balance. In addition, pesticide treadmill lures the farmers for ever increasing use of pesticide dosages, thereby encouraging a vicious cycle of environmental pollution. Vegetable crops are one of the major groups of crops that contribute heavily in this regard, being the third major consumers of pesticides after cotton and rice in our country. Insect pests and diseases inflict the horticultural crops especially vegetable crops more than others because of their supple nature, intensive cultivation under high moisture and input regimes, short duration and denser canopy of the crops.

Introduction

The fruit crop acreage in Kashmir is rapidly increasing and is developing into perennial stretches of monocropping systems. The area of apple in Kashmir 143790 ha. Parallely this has led to increased pests and use of chemical pesticides. As a result, pest resurgence, pesticide residue in fruits, deleterious effect on biological agents and resistance build-up in insects have all complicated pest management (Smith, 1970).In view of the rising export potential of residue free fruits and the crisis situation created by indiscriminate use of pesticides, fruit crops need much more attention in terms of IPM input than what is getting now. It is therefore, necessary to develop and follow a rational approach with greater reliance on IPM to promote sustainability and to reduce the number of application of hazardous chemicals. Integrated pest management requires thorough preplanning even before establishing the fruit orchard which includes selection of suitable site,siol type, improved and pest free scion varieties, resistant rootstock compatible with scion, regular pest and weather monitoring in the orchard, balanced use of fertilizers, water management, proper training and pruning, improved cultural practices,augementation and conservation of parasitoids and predators and need based application of selective insecticides.The various strategies for successful management of economically important pests of temperate fruits are thoroughly discussed.

Introduction

In the environment of dwindling water resources and contention of the other sectors, the share of water allocated to irrigation is likely to be decreased by 10 to 15 per cent in the next two decades. One of the ways of improving water scarcity is by enhancing its use efficiency or productivity. Water use efficiency (WUE) is a broad concept that can be defined in many ways. For farmers or farm irrigators, WUE is the yield of harvested crop produce achieved from the available water to the crop from irrigation, rainfall and soil water storage. Improving WUE in pomegranate will be required an increasing in pomegranate water productivity (i.e. an increasing marketable yield per unit of water used by plants and reduction in water losses from the root zone (Chopde and Gorantiwar, 1998; Chopde et al., 2001; Intrigoli et al., 2011). For comprehensive improvement of WUE, it is necessary to raise the following ratios to their maximum: stored soil water content/water received through rainfall and irrigation, transpiration/water consumption, biomass yield/transpiration, water consumption/soil water storage and economic benefit/biomass yield (Frederick, 1993).

1.1    Introduction

1.2    Histories and Development
    
1.3    Components of Drip Irrigation System
    
1.4    Types of Drip System
    
1.5     Advantages and Disadvantages
    
1.6    Evaluation and Futuristic Approach of Drip Irrigation in India Questions & Problems
        
References

Appendix-'K'    :    Supreme Court Directions on School Safety
    
Case Study    :    Kumbakonam School Fire Tragedy

4.1. Substrate quality
    Litter quality
    Soil organic matter (SOM) quality

4.2. Decomposer community
    Soil animals
    Soil microorganisms
    Terrestrial fungi
    Actinomycetes    
    Bacteria

Introduction

Fisheries represent an important and fast growing food production sector in India that contributes more than 1% to the National GDP and 4.7% to the agricultural GDP. With an annual production of about 7 million tonnes from marine and inland waters, the country is the 3rd fish producer in the world and the 2nd largest producer of inland fish, next only to China. With a coastline of 8,129 km and EEZ of 2.02 sq km, our marine fish production is to the tune of 2.95 million tonnes. Similarly, the inland fisheries resources comprising 29,000 km of rivers, 0.3 million ha of estuaries, 0.19 million ha of backwaters and lagoons, 3.15 million ha of reservoirs, 0.2 million ha of floodplain wetlands. 0.72 million ha of upland lakes and 2.34 million ha of ponds and tanks produce 3.76 million tonnes annually. Annual export earnings from fish and shellfish are about Rs.8.357 crore, accounting for nearly 20% of the agricultural export. Fish is a health food that is relatively cheap and affordable to the poor. Fisheries and aquaculture provides income, food and livelihood to more than 14 million people directly or indirectly. The annual per capita availability of fish in the country is 9 kg that sustains the domestic market price of fish and the sector has registered an impressive overall annual growth rate of over 4% over the years, with growth in some farming activities going beyond 5%. However, stagnating growth in marine and inland capture fisheries is a cause of concern.

Introduction

Hormones may be defined as specific chemical molecules produced in certain specific organs called specialized cells or endocrine glands. They are delivered into the blood stream or some other body fluid in minute amounts by the circulatory system of the body and their they exerts a physiological effect at a site of action remote from its origin, regulating numerous biological activities including growth, development, reproduction, water & electrolyte balance, storage & usage of energy etc.

Introduction

The diverse cluster of naturally occurring organic compounds including fats, oils, fatty acids, waxes, phospholipids, eicosanoids, terpenes, steroids and fat soluble vitamins that do not prefer to interact with water but soluble in non-polar organic solvents like ether, chloroform, benzene, acetone, are called as lipids. The main functions of lipids in biological system include storage and transport of metabolic fuel, structural component of cell membranes, insulation & protection of vital organs from shock and carrier of fat soluble vitamins. Contradictory to proteins,lipids are not polymers in nature and are hydrophobic due to presence of a long hydrophobic chain. Apart from this, lipids also act as precursor molecules for several pigments, hormones and signaling molecules.

Introduction

The word ‘Statistics’ is probably derived from the Latin word ‘status’ (means a political state) or the Italian word ‘statista’ or the German word ‘statistik’, each of which means a ‘political state’. It is used in singular as well as in plural sense. In singular sense, statistics is used as a subject that deals with the principles and methods employed in collection, presentation, analysis and interpretation of data. In plural sense, statistics is considered as numerical description of quantitative information.

Statistics (Definition), Scope and Limitations

Different persons defined Statistics in different ways. Some of the popular definitions of Statistics are given below.

According to Croxton and Cowden, “Statistics may be defined as the collection, presentation, analysis and interpretation of numerical data”.

According to Sir R.A. Fisher “The science of Statistics is essentially a branch of applied mathematics and may be regarded as mathematics applied to observational data”.

Fisher’s definition is most exact in the sense that it covers all aspects and fields of Statistics. On the basis of above ideas, Statistics can be defined as a science which deals with collection, presentation, analysis of data and interpretation of results.

A semiconductor is a material that has an electrical resistivity between that of a conductor and an insulator.

A semiconductor is a substance, usually a solid chemical element or compound that can conduct electricity under some conditions but not others, making it a good medium for the control of electrical current. Its conductance varies depending on the current or voltage applied to a control electrode, or on the intensity of irradiation by infrared (IR), visible light, ultraviolet (UV), or X rays.

An external electrical field changes a semiconductor’s resistivity. Devices made from semiconductor materials are the foundation of modern electronics, including radio, computers, telephones, and many other devices. Semiconductor devices include the transistor, solar cells, many kinds of diodes including the light–emitting diode, the silicon controlled rectifier, and digital and analog integrated circuits. Solar photovoltaic panels are large semiconductor devices that directly convert light energy into electrical energy. In a metallic conductor, current is carried by the flow of electrons. In semiconductors, current can be carried either by the flow of electrons or by the flow of positively–charged “holes” in the electron structure of the material.

A fullerene is any molecule composed entirely of carbon, in the form of a hollow sphere, ellipsoid, or tube. Spherical fullerenes are also called buckyballs, and cylindrical ones are called carbon nanotubes or buckytubes. Fullerenes are similar in structure to graphite, which is composed of stacked graphene sheets of linked hexagonal rings; but they may also contain pentagonal (or sometimes heptagonal) rings.

The first fullerene to be discovered, and the family’s namesake, was buckminsterfullerene C₆₀, made in 1985 by Robert Curl, Harold Kroto and Richard Smalley. The name was homage to Richard Buckminster Fuller, whose geodesic domesit resembles. Fullereneshave since been found to occur (if rarely) in nature.

The discovery of fullerenes greatly expandedthe numberof known carbon allotropes, which until recently were limited to graphite, diamond, and amorphous carbon such as soot and charcoal. Buckyballs and buckytubes have been the subject of intense research, both for their unique chemistry and for their technological applications, especially in materials science, electronics, and nanotechnology.

2.1. INTRODUCTION

The purpose of collecting data is to collect evidence for reaching a sound and clear solution to a problem. In this chapter we will study the sources of data, mode of data collection and its techniques.

Sources and Types of Data

Statistical data can be obtained from two sources:

Primary and

Secondary

A buffer is an aqueous solution consisting of a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid. Its pH changes very little when a small amount of strong acid or base is added to it and thus it is used to prevent changes in the pH of a solution. Buffer solutions are used as a means of keeping pH at a nearly constant value in a wide variety of chemical applications. Many life forms thrive only in a relatively small pH range so they utilize a buffer solution to maintain a constant pH. One example of a buffer solution found in nature is blood.

Water, of its very nature, as it occurs automatically in the process of cosmic evolution, is fit, with a fitness no less marvelous and varied than that fitness of the organism which has been won by the process of adaptation in the course of organic evolution.

WATER IS ABSOLUTELY ESSENTIAL FOR ALL LIVING ORGANISMS

The evidence:

Most organisms are comprised of at least 70% or more water. Some plants, like a head of lettuce, are made up of nearly 95% water;

When organisms go dormant, they loose most of their water. For example, seeds and buds are typically less than 10% water, as are desiccated rotifers, nematodes and yeast cells;

Earth is the water planet (that’s why astronomers get so excited about finding water in space).

Water is the limiting resource for crop productivity in most agricultural systems.

1.1 Introduction

Greenhouse effect, regulated by the presence of greenhouse gases in the earth’s atmosphere, is a natural process that plays a major part in shaping the earth’s climate. A continued rise in concentration of the greenhouse gases has led to enhanced greenhouse effect resulting in global warming and global climate change. The impact of human activities on greenhouse gases (GHGs) emission through fossil fuel burning, agriculture and industrial processes is important and familiar to people. This chapter addresses basic principles and physics of greenhouse effect and the role of Indian agriculture in GHG emissions. Agriculture is a potential source and sink to GHGs in atmosphere. It is a source for three primary GHGs: CO₂, N₂O and CH4 and sink for atmospheric CO₂ . Management of agricultural land, land use change and forestry has a profound influence on atmospheric GHGs concentration. The two broad anthropogenic sources of GHGs emission from agriculture are the energy use in agriculture (manufacture and use of agricultural inputs and farm machinery) and the management of agricultural land. Large sections of the India’s population depend on biomass resources like wood, crop residues and cattle dung for energy. In the agriculture sector, besides the CO₂ emissions due to burning of crop and animal waste, India’s large ruminant population and rice fields are significant contributors to CH₄ emissions. An understanding of GHG emissions by sources and removal by sinks in agriculture is important to take appropriate mitigation and adaptation strategies and to estimate and create inventory of GHGs.

11.1 Introduction

Agriculture sector contributes 19% to the total greenhouse gas (GHG) emission in India. Combined with land use change and forestry (LUCF), it is the second largest source of GHG emission in India. Initial efforts at dealing with the problem of global warming concentrated on mitigation, with the aim of reducing and possibly stabilizing the GHG concentrations in the atmosphere (UNFCCC, 1992). Even if this stabilization was achieved, sea level rise and global warming would continue to increase over centuries because of the inertia of the earth systems. Mitigation activities are traditionally employed as natural resources conservation measures, but they generally serve the dual purposes of reducing the emission of GHG from anthropogen sources, and enhancing carbon ‘‘sink’’. Forestry sector holds the key to the success of mitigation efforts, and has great potential to sequester carbon through reduced emissions from deforestation and degradation (REDD), afforestation and reforestation, and forest management. India’s vast area of croplands, through cropland management, could be an important area for sequestering carbon in soils. India being the largest producer of rice and livestock in the world, appropriate management can contribute to a reduction of methane emission from rice production and enteric fermentation.

12.1 Introduction

The concentration of greenhouse gases (GHGs) in the atmosphere has been rising from historical levels, primarily due to fossil-fuel burning and land-use changes. These gases have the potential to trap energy from the sun, which may result in global warming, and this has sparked a world-wide concern that emissions of these gases should be reduced below the 1990 levels by the year 2012 (Kyoto Protocol). The international community has recognized the need to stabilize/reduce CO₂ and other GHG emission. The types of farm power, farm equipment and machinery have a significant influence on intensification and optimization outcomes, and on profit. However, until now, agricultural intensification generally had a negative effect on the quality of many of the essential resources such as soil, water, land, biodiversity and the ecosystem services which caused a decline in the yield and factor productivity growth rates. Another challenge to agriculture is its environmental food print and climate change. Agriculture is responsible for about 30% of the total greenhouse gas emissions, while being directly affected by the consequences of a changing climate. It is estimated that global conversion of all croplands to conservation tillage (CT) could sequester 5 billion tones of carbon annually.

In India significant efforts are underway to develop and popularize agricultural machinery and tools for resource conservation through the combined efforts of several State and National Institutions, particularly Rice-Wheat Consortium for Indo Gangetic Plains. The new technologies are encouraging the farmers to take up innovative ways of managing their resources for higher productivity and also providing a way to the scientific community to solve emerging problems of climate change. The farm machinery in conservation agriculture (CA) can reduce the emissions of fossil fuels compared to conventional agriculture by up to 60%. However, the largest contribution to mitigate climate change with CA can be obtained from carbon (C) sequestration and the storage of atmospheric carbon in the soil. The C -sink potential of soils varies depending on climate and production system. On an average 0.1-0.5 t. ha^-l y^-l of organic carbon can be sequestered under humid temperate conditions. Farm equipments like straw shavers and rotavators play a role in residue incorporation in the soil.

13.1 Section-A : Write True / False

Q.1 The square of a standard normal variate is known as Chi-square variate with one d.f.

Q.2 If X ~ N(μ, σ²) and Z = (x - μ)/σ then Z² is known as Chi-square variate with 1.d.f.

Q.3 If Xi ~ N(μi, σi), i = 1,2,...., n are n independent normal variates then

Introduction

Traditionally, Indian economy was characterised as an agrarian economy for the reasons that majority of the population were dependant on agriculture and allied activities and more than fifty per cent of the Gross Domestic Product (GDP) was derived from agricultural sector. However, paradoxically, despite a drastic decline in the share of agricultural sector to GDP wherein it declined from 56.5 per cent in 1950-51 to 15.11 per cent in 2016-17 (Statisticstimes.com) Indian economy is still characterised as an agrarian economy. But, it would not be inappropriate to state that Indian agricultural sector is at crossroads, or it would be rather safe to comment that for any further advancement of the agricultural sector, value addition is imperative. During the post independence period, the sector had witnessed commendable progress attributing to a shift from an undesirable situation of ‘ship to mouth’ to ‘farm to mouth’. It is obvious that as a result of various programmes, projects and schemes tailored for development of agricultural sector, India had attained self sufficiency in food crops and other agricultural/horticultural products. However, the darker side is that the Indian peasants are still deprived of a remunerative price for their products as well as a respected status in the society which in turn is arresting further advancement and progress of the sector. Thus, it could be concluded that future of agricultural sector in India vests on the adoption of appropriate marketing strategies, supply chain management and value addition initiatives for the prosperity of our farming community in specific and agricultural sector in general. It is in this backdrop, the NITI Aayog has proposed various reforms in India’s agriculture sector, including liberal contract farming, direct purchase from farmers by private players, direct sale by farmers to consumers, and single trader license, among other measures, in order to double rural income in the next five years. Ministry of Agriculture, Government of India, has been conducting various consultations and seeking suggestions from numerous stakeholders in agriculture sector, in order to devise a strategy to double the income of farmers by 2022.

Introduction

Rice is the major staple food for more than 70 percent of the Indian population. India cultivates more than 4,000 varieties and hybrids of rice to cater to varied consumer preferences. A portion of the total cultivated rice is also used for processed products like snacks, savouries and bakery items. India was the largest exporter of rice in 2015-16 followed by Thailand, Vietnam and Pakistan. Rice production forecast is higher at 105 MMT in 2016/17 compared to 2015/16 production of 103 MMT (India Grain and Feed Annual, 2016). Rice milling is the oldest and the leading agro processing industry of the country. Paddy grain is milled either in raw condition or after parboiling, mostly by single hullers of which over 82,000 are registered in the country. Further, over the years, there has been a steady growth of improved rice mills in the country. Most of these have capacities ranging from 2 tons /hr to 10 tons/ hour. At present, it has a turnover of more than 25,500 crore per annum. It processes about 85 million tons of paddy per year and provides staple food grain and other valuable products required by over 60% of the population. Though, rice milling is a wide spread business undertaken in India, commercializing value added products is now gaining customer attraction paving way to merge milling and value addition under a single roof. The desirability of the working population to get foods, particularly rice based products in RTE and RTC forms has thrown a positive approach to new and emerging entrepreneurs to take up a venture in commencing rice based food processing industry.

Introduction

Soybean (Glycine max) is also known as the wonder bean or miracle bean or “golden grain” due to its diversified applicability. Soybean has an important place in world’s oilseed cultivation scenario, due to its high productivity, profitability and vital contribution towards maintaining soil fertility. The crop also has a prominent place as the world’s most important seed legume, which contributes 25% to the global vegetable oil production, about two thirds of the world’s protein concentrate for livestock feeding and is a valuable ingredient in formulated feeds for poultry and fish. The major soybean producing nations are United States, Brazil and Argentina. These three countries dominate in global production, accounting for 80% of the world’s soybean supply. Global production of soybean has grown at a CAGR of 2.78% from 215.69 million metric tons in 2004-05 to 283.79 million metric tons in 2013-14.

India stands 5^th in global production of soybean. In India, soybean cultivation started in early 1970s, but it has emerged as number one among oilseed crops covering around 11 m ha area with total production of around 11.5 m tons. At present, the average productivity of soybean is about 1.3 tons/ha and it can be easily doubled in near future. Production of soybean in India is dominated by Maharashtra and Madhya Pradesh which contribute 89% of the total production. Rajasthan, Andhra Pradesh, Karnataka, Chhattisgarh and Gujarat contribute the remaining 11% production.

About 85% of world’s soybeans are processed annually into soybean meal and oil. Approximately 98% of soybean meal is crushed and further processed into animal feed with the balance used to make soy flour and proteins. Of the oil fraction, 95% is consumed as edible oil; the rest is used for industrial products such as fatty acids, soaps and biodiesel.

The manuscript was completed in February 2020. The book was supposed to be out in print form in April 2020. In between the pandemic changed the world. Obviously, world changing events can’t be left out of the book, particularly if the book is about the future of science, engineering, technology and humanity. I, therefore, requested the publisher of the book for the inclusion of a chapter COVID crisis and its impact on the future of the world. He readily agreed.

I am sincerely grateful to the publisher for allowing me to include issues relevant for the present book, as an additional chapter at the end of the book. The subject at the moment looks unending and it has so many dimensions. I have tried to cover them as briefly as possible, in the context of the book. In spite of the several difficulties due to this last minute inclusion the publisher has taken pains to include it. I am grateful to him for his gesture.

The pandemic of this proportion is expected to get the views/suggestions from equally large number of people. Everyone is eager to see the end of the pandemic. And everyone has realised that the world will be a much different place. Some people are hopeful that the problems will be resolved, of course using multi-dimensional approaches. Not many are sure of the time frame. There is also pessimism among common people. One of my aunt’s asks me - what kind of research we have been doing all these years that we can’t even face the challenges posed by a mere virus? Has the balloon of the technology busted by a miniscule virus? In this fluid time many questions are being asked, and as many answers are also emerging. It is a big issue. It is as big as that emerged after the Second World War. Some are calling it the ‘birth of a new power’.