eChapters

Among the vast resources of plants, aromatic and medicinal plants are highly beneficial to mankind for supplying medicines and essence. Olfactory gland bearing aromatic plants are few and many of them are located mainly in tropics and sub-tropics. Ecological conditions in the tropics are so conducive for such plants that out of 75,000 edible plants, majority are found in this region. (Chai et al., 1979, Jong, 1979)

Among the aromatic plants, kewda (Pandanus fascicularis Lam.), a common species of screwpine, is commercially important for its highly aromatic male spadices used in the production of highly prized kewda perfumes. Kewda attar, water and oil (rooh kewda) are the important perfumery products. Kewda attar blends well with most of the fancy perfumes, in preparation of lotions, cosmetics, soaps, hair oils, agarbatis (incense sticks), scenting clothes and flavouring betel masala, chewing tobacco and bouquets. Kewda water is used for flavouring various foods, confectionaries, sweets, syrups and soft drinks. The oil and attar are considered as stimulant, antispasmodic and administered for headache and rheumatism (Chopra et al., 1956). The kewda is mentioned frequently in Tamil classics as having flowers which neutralize the foul fish odour pervading the sea coast with their strong perfume. Jehangir in his memoirs, Tuzuk-i-Jahangiri, described kewda flower for its strong and penetrating scent, which even obscures that of musk (Gandhi, 1989).

Odisha state lying between 17^o 52′ N to 22^o 45′ N latitude and 81^o 50′ E to 87^o 50′ E longitude has a prosperous agriculture. Nearly 75 % of its working population are either cultivators or agricultural labourers and remaining 25 % are engaged in the categories of household industry and other works (Anonymous, 1988). The wastelands occupy 13.79 % of the total area of Odisha and are mostly scattered throughout the state. The areas of wastelands in the state mainly accounted for the hilly slopes, degraded forests, over grazed revenue wastelands, oil eroded valleys, drought stricken pastures, saline and marshy lands, etc. The changes in land use leading to creation of wastelands include overgrazing forest degradation and development of marginal cropland due to flood, drought and soil erosion etc. (Fig. 1).

Kewda (Pandanus fascicularis Lam.) is a native of the old world extending from Africa to Australia (Chittenden, 1956; Lorus and Milne, 1967; Mott, 1975). About 600 species of Pandanus are widely distributed in the moist tropics of the old world and kewda is the most widespread species being recorded from Mauritius Islands in the west to Polynesian and Micronesian Islands in the east (Deshaprabhu, 1966).

It occupies an important position in the mythology of Melanesian, Polynesian and Micronesian Islands (Massal and Barrau, 1956). Kewda has been mentioned in the Indian mythology with several available legends. In Skandha Puran, it is mentioned that Ketaki (P. odorattisimus L.f.) flower is unfit to worship Shiva (Bhattacharjee, 1987). As regards to popularity of Kewda, one of the Gujarati tribal songs says that the sun rises behind the Kewda tree, the moon applies antimony to its eyes, the night is lit with soft moon light. Another mythological legend mentioned that during Satya Yuga, there was a fight between Brahma and Vishnu to know, to prove their greatness. Lord Shiva decided a simple method that the one, who can see his head or his feet, shall be greater than the other. Shiva disappeared and became so great that Brahma and Vishnu couldn’t see his head or feet and searched in different directions. Vishnu went up to patal, but couldn’t find his feet and Brahma had gone up to the highest peak and could not see the head of Shiva. On the returned way, Bramha found a Kewda flower and claimed that he had brought the flower from the head of Lord Shiva. On questioning by Vishnu, Kewda flower also replied that she was adorned by Shiva (Gandhi, 1989).

Kewda is exclusively propagated through ground suckers and leaf bearing terminal cuttings. In kewda growing areas, predominantly the terminal shoot cuttings are used in commercial plantations. However, the seeds are also capable to germinate and give rise to plants, but it is not in practice due to hard mesocarp and seed coat (Bailey, 1950, Deshaprabhu, 1966, Mott, 1975, Maharana and Jagadev, 1993).

Seed propagation

In kewda, the flowers develop into berries, which fuse to form a multiple fruit. The receptacle and bracts are included in the fruit. The seeds are deep seated and very difficult to extract, hence seeds are sown along with the fibrous drupes. Each drupe contains 2-9 seeds. Seeds collected from ripe fruits are sown during spring. The seeds normally, take about 3 months for germination due to the hard seed coat and impervious fibrous covering. Experimentally, it was observed that one hour sulphuric acid scarification treatment of the drupes reduced the germination period by about one month increasing the germination percentage as compared to direct sowing, however, scarification for more than one hour was deterimental (Table 14) (Maharana and Jagadev, 1993). Bailey (1950) reported that seed soaking in tepid water for 24 hours would aid the germination. The seed propagated plants (Plate-27) take about 2-3 years more for flowering as compared to vegetatively propagated plants.

The world trade in flavour and fragrances in 1987 was US $ 7,000 million and at present, it is estimated at more than $ 10,000 million annually. In 1975, perfume was used by one woman in ten, but today it is used by eight out of ten women; even reticent Japanese women are adopting the habit (Anonymous, 1995 c). The average annual industry growth rate in perfumes of India is valued at about US $ 20 million with an annual growth rate of 12% (Murty, 1993),while the UK market is Rs. 2000 crores and the US market supersedes it by Rs. 4000 crores (Walia, 1997). However, the domestic luxury perfume market is estimated to grow at a rate of 20-25 % (Biswas, 2012). Besides domestic market, India earns a lot of foreign exchange from the export of total essential oils and perfumes and is fast growing as it is showed from the trends in export earnings of Rs. 11.1 corers in 1982-83 rose to 4-fold in 1986-87 of Rs. 41.1 crores (CHEMEXCIL, 1988). According to a market survey report, Ahmed (1999) reported that the daily turn over of the attar market in India is more than 50 crores.

Middle East countries continue to be the big buyers of our traditional perfumes. Kewda flavour which is used in pan masala and tobacco is a familiar one in this part of the world. Kewda essence, being one of the few flavouring oils, has a good scope for export to other developed countries where the food flavouring industry is well developed. India is the leading producer of kewda perfumes in the world and the market for kewda perfumes is fast expanding specifically in the Arab countries. India exported the kewda water of Rs. 266.2 lakhs in 1986-87 which rose to Rs. 276.4 lakhs in 1987-88 (CHEMEXCIL, 1990). Anonymous (2007) reported that about 140 distilleries (bhattis), both local and outsider, earn about Rs.1.3 crore by way of extraction charges and annually they extract 332 kgs of kewda oil (Rs.8.3 crore), 7823 kgs of kewda attar (Rs.15.65 crores) and 150 MTs of kewda water (Rs.4.47 crore), the total coming to around Rs.28 crore. For extracting attar , the extractors use about Rs. 8 crore worth of sandal wood oil procured mainly from other states, while Rs.18 crore goes to the plantation owners as flower cost and to the flower collectors.

I. General information

1. Formal type of garden is laid out in a symmetrical or a geometrical pattern
2. Features of a formal garden are trimmed formal hedges, cypress, ashoka trees
3. Informal type of garden in which all plants and features are arranged in a natural way
4. Wild garden was laid out by William Robinson
5. Examples for formal type of gardens are Mughal, Persian, Indian and French style
6. Examples for informal type of gardens are English and Japanese garden
7. Main features of English garden are lawn, herbaceous border and rockery
8. Main features of Italian garden are massive flight of marble stairs, decorative urns, fountains
9. Mughal type of garden is a replica of ancient Persian garden

Introduction

Solar air heating is the conversion of solar radiation to thermal heat. The thermal heat is absorbed and carried by air which is delivered to a living or working space. The transparent property of air means that it does not directly absorb effective amounts of solar radiation, so an intermediate process is required to make this energy transfer possible and deliver the heated air into a living space (Fig.10.1). The technologies designed to facilitate this process are known as solar air heaters. Solar air heating technologies use only free, renewable and clean energy and can help defray the rising cost of conventional energy.

Life cycle cost analysis

Economics of solar energy devices can be calculated through life cycle cost (LCC) analysis. Total life cycle cost of a device is comprised of capital cost, maintenance cost, replacement costs for damagaed components and operational cost. Before adding these above costs, all future costs (C) are converted to present worth considering the relative rate of inflation (i) and discount rate (d).

Where, PW is the present worth of any future cost, i is the relative rate of inflation and d is the discount rate per year and n is the time period in years. Relative rate of inflation accounts for the escalted increase or decrease in prices of a commodity in comparison to general inflation rate. For any commodity, if the price escalation is expected as per the general inflation rate then relative rate of inflation is considered zero. In general case, relative rate of inflation is considered zero. Discount rate accounts the real value of money in future and in most of the economies of the world it is about 8-12%, and therefore 10% is considered in most analyis. The discount rate also refers to the interest rate used in discounted cash flow (DCF) analysis to determine the present value of future cash flows. The discount rate in DCF analysis takes into account not just the time value of money, but also the risk or uncertainty of future cash flows; the greater the uncertainty of future cash flows, the higher the discount rate. A discount rate of 10 % per year would mean that in real terms it makes no difference to a farmer whether he has ? 100 now or ? 110 in one year’s time. Conversely, a cost of ? 110 one year from now has a present worth of ? 100. For a future single cost in n^th year, the present worth of that cost is calculated using Eq (1). However, for future multiple payments, costs are to be converted to present worth for each year and then needs to be cumulated. For calculation of annualized life cycle cost (ALCC) of solar devices, annuity factor (AF) needs to be calculated for a period of life cycle of the device as follows:

12.1 INTRODUCTION

Oil Palm (Elaeis guineensis Jacq.) is a heavy feeder and needs a balanced and adequate supply of nutrients for growth and yield. Fertilizer is one of the most costly inputs, which accounts for greater part of production costs in the cultivation of oil palm. Large amount of nutrients are removed by the fruit bunches harvested from the mature palms. It is estimated that 25 tonnes fresh fruit bunches per hectare per year removes 93.5 Kg Nitrogen, 11.0 Kg Phosphorous, 92.7 Kg Potassium, 19.3 Kg Magnesium and 20.3 Kg Calcium.

Economic yields of oil palm are achieved when the supply of nutrients from the soil, palm residues and fertilizers are properly integrated in required quantities. Leaf analysis is an analytical tool for detecting the nutrient requirements in oil palm and other perennial crops, which are slow growing and can provide easily, defined standard leaf material for analysis due to leaf phyllotaxis. Nutrient deficiency symptoms are also an important means for determining the nutritional problems in oil palm, since the crop presents easily identifiable N, K and Mg deficiency symptoms. However, by the time symptoms are evident, nutrient deficiency might have already affected growth and yield.

Also the nutrient supply may be insufficient before the appearance of leaf symptoms. So there is a need for a thorough inspection of the leaf canopy to corroborate the results of leaf analysis and identify the areas with severe nutrient deficiencies. The research on oil palm nutrition was carried out under rainfed conditions at Palode, Kerala and irrigated conditions at Pedavegi, Andhra Pradesh.

In India, a great variety of soils ranging from red sandy loams/sandy clay loams (Alfisols), alluvial silt loams (Inceptisols / Entisols), heavy black soils (Vertisols) and acidic red laterite soils (Oxisols) are put to oil palm cultivation. In Andhra Pradesh, it is grown in red sandy, red loamy, red loam with clay base, deltaic alluvium pH - 6.5 to 9.0. In Karnataka, it is grown in red and brown sandy loams and black clayey soils, with pH - 6.5 to 9.0. Red soils, red loamy soils and clay loam soils are used for growing oil palm in Tamil Nadu. Laterite soils are used for oil palm cultivation in Kerala.

27.1 INTRODUCTION

In India, the horticulture sector contributes around 29 per cent of the GDP and 37 per cent of the total exports of agricultural commodities from about 13.08% of area. India has been placed as the second largest producer of fruits and vegetables; largest producer and consumer of cashew nut, tea, spices; third largest producer of coconut; fourth largest producer and consumer of rubber and sixth largest producer of coffee in the world. Several new programmes area in operation and significant developments in area expansion, production, value-addition and exports have taken place. Today, as a result of better synergy between research agencies, technological and policy initiatives by the governmental agencies, proactive participation of private players and higher degree of diversification to horticulture, this sector has emerged as a sustainable and viable proposition for even the small and marginal farmers including different stakeholders in the commodity chain. In spite of the remarkable progress made in the horticulture Sector in India, there is lot of scope in improvement in safety and quality aspects of horticultural produce.

The concept of biosafety encompasses a range of measures, policies and procedures for minimizing potential risks likely to appear to the environment and human health. Such safeguards must be put in place now. Biosafety is currently being promoted in a variety of ways by industry, governments and civil society. Quality and safety become prime concern because most of the horticultural produce are consumed daily in fresh, cooked and processed form and contribute major share in our daily diet. To ensure biosafety and quality of horticultural produce we need to ensure: a)Supply of quality inputs, b)Adoption of good cultural practices, c) Handling and processing of horticultural produce in scientific /hygienic manner, d)Packing, storage, transportation and delivery etc. in such a way that it reaches at consumers’ table without deteriorating the quality.

To ensure such aspects various preventive and certification measures have been initiated by government and certification agencies all over the globe including India , such as prevention of Food Adulteration Act 1954, Agricultural Produce Marketing Act, 1937, Food Safety Standards Association of India (FSSAI), Food Safety System Certification (FSSC:2200), International Food Certification (IFC), Food Chain Traceability, Hazard Analysis and Critical Control Point (HACCP), Food Product Orders (FPO), etc. The major emphasis under these certifications/regulations is to ensure quality and safety of the produce and minimize the risks by reducing the biological, chemical, physical hazards like microorganism contamination, level of heavy metal/chemicals/ drugs beyond the critical limits, residual effects of toxic substances etc. Brief of a few certification/regulations are listed below.

Site-specific weed control technologies practiced in precision farming are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and take action to maximise the chances of successfully controlling them taking into account predefined factors such as economics.Some of the commercial hardware and software developed for precision agriculture practices comprise tools for weed mapping and control software that adapts spraying to local weed occurrence. However, few farmers have adopted sitespecific weed management, although several studies have shown that weed occurrence and density varies significantly within a farm or a field. Site-specific weed control techniques have gained interest in the precision farming community over the years. Managing weeds on a subfield level requires measuring the varying density of weeds within a field. Decision models aid in the selection and adjustment of the treatments, depending on the weed infestation. The weed control can be done either with herbicides or mechanically. A site-specific herbicide application technology can save large amounts of herbicides. Mechanical weed control techniques adapting to the weed situation in the field are applicable to a wide spectrum of crops.

A system for the discrimination of different weed species and crops from images is done which generates weed maps automatically. Models for the yield effect of weeds are developed and applied in on-farm-research experimental setups. Economic weed thresholds are derived and used for an herbicide application with a patch sprayer.Herbicide use has not eliminated weed problems in agriculture and the need for manual weed removal is still an issue within specialty crop systems, particularly during the first several weeks of crop emergence when competition for resources is greatest.

Precision agriculture is a powerful technology with potentially important applications to weed management. However, growers should remember good agronomic practices, including preventing weed infestations, managing herbicides wisely to prevent resistance, and minimizing environmental impact associated with weed management. Weeds, and methods used to control weeds, can have negative economic and environmental impacts. With precision agriculture, growers can take advantage of the patchy nature of weeds by targeting management efforts only where they are needed instead of wasting expensive and potentially hazardous inputs where weeds are not present. Weeds are patchy because weed spread, survival, and reproduction are variable within a field and over time. Weed patches stay in about the same place from year to year, even though weed density within a patch may vary

Plants require proper environment for its growth and development. If environment is not suitable crop would not do well. To ensure proper environment to commercial crops for their better growth and development covered structures are used which provide microclimate appropriate for their growth and development. Growing of crops under such protective structures, also known as greenhouses, is termed as greenhouse technology. The structures harness solar radiation for photosynthesis in plants or can be provided with artificial lights (LEDs) for the purpose. The technology embraces many aspects of farming such as modelling of structures, agronomic practices for the production of the crop and the commercial viability of the venture. The technology ensures crop production in a cover more or less independent of natural prevailing environment. The covering or cladding permits desirable aspect of sun and air and help in modifying crop production environment inside. The modification of environment is aimed of creating micro-climate inside the structure/greenhouse most appropriate for the growth and development of the crop.

Hence greenhouse can be defined as a framed or inflated structure with claddings like glass polyethylene sheets, poly carbonates, fibre reinforced plastics and others in which plants are grown by creating microclimate conducive to crop for its growth and development with or without automation and mechanization. The purpose of growing crops under greenhouse conditions is to extend their cropping season and to protect them from adverse environmental conditions, such as extreme temperatures, precipitation and pests. A large number of greenhouses/poly houses have come up in almost all states of India. Though in infancy but greenhouse cultivation particularly in horticulture crops and nursery production is visible.

Soil is the main growing medium. Natural as well as synthetic substitutes to soils are cropping up. Under greenhouse cultivation growing medium is generally top soil as used in open field/traditional farming. The practices of soil preparation for planting crops are more or less same as under open field. Generally, crops are planted on raise beds. As under open conventional farming soil preparation are made as per the crops or their varieties/hybrids to be grown. To enrich the soil with nutrients soil is tested for its physical and chemical properties and amended accordingly keeping in view the crop requirement. The soil composition is checked with each crop cycle and amended as per requirement of next crop. To avoid the harmful microbes and insects build up in the soil it is advisable to solarize or fumigate the greenhouse soil each year during hottest month of the year. Soil solarisation is an environment friendly soil pathogen management method and practiced widely in north India.

Soil Solarisation

Soil solarisation is an environment friendly method of using solar thermal power for controlling pests such as soil borne plant pathogens including fungi, bacteria, nematodes, and insect and mite pests along with weed seeds and seedlings in the moist soil by mulching the soil usually with a transparent polyethylene cover, to trap solar energy in greenhouses. It may also be described as a method of decontaminating soil or soil disinfestation using sunlight or solar thermal power. This energy/temperature causes desirable physical, chemical, and biological changes in the soil.

The variety of greenhouses and greenhouse material, equipment and accessories are so many. However, there are certain basic materials that essential in almost all types of green houses. These are

Structural framing materials

Such materialsinclude low maintenance non-heat conducting timber; strong and durable galvanized steel; or light, low-maintenance and sturdy aluminium alloys. Though plastic pipe frames are usable, they are not very strong to withstand snow load or strong wind sheering forces. What one should choose as the framing material would be determined by the material one wishes to use as glazing, his budget and the permanence of the structure one desires. Aluminium is a popular material for greenhouse framework because it is relatively lightweight, rustproof, affordable and easy to assemble. The downside is that it is not a good insulating material and in very cold weather, heat loss from the metal frame could inflate your heating bill. Also, you would need to look for sturdy frames if your greenhouse is located in an area that experiences high winds. Condensation could also occur on an aluminium frame. Wooden structural frameworks for garden greenhouses are also a popular choice for its aesthetic value, natural feel and the ’warmth’ it exudes. It is an easy material to work with especially if you are not using a greenhouse kit for building. Some greenhouse owners would settle for nothing else as they believe it is the only material that complements the natural beauty of plants inside the greenhouse! Wood is a good insulating material so it will not allow heat loss in cold weather. Reinforced wood has superior strength and has an excellent load bearing capacity. Being a natural material, it has the potential to develop mildew or disease and offer a haven to tiny pests. So, when you choose wood to build the framework of your greenhouse, be sure that you pick a high quality hardy wood such as redwood, cypress or cedar. Also, treat wood with non-hazardous chemicals so that your plants are not adversely affected. The preservatives used for wooden greenhouse frames should be pressure treated, salt type or copper naphthenate. Copper naphthenate is a general use preservative used for pressure treating utility poles and timber. It is known to be very effective in preventing mould, mildew and dry rot. It works very well against wood-damaging fungi and insect pests. Pentachlorophenol is a restricted use wood preservative and is toxic to plants and humans. It is not available to the general public and poles or timber treated with it are not suitable for use in a greenhouse. PVC pipe can also be used as support for small greenhouses that are to be covered with polyethylene, but PVC requires additional support to withstand strong winds. Being flexible, PVC can be used particularly well in hoop houses. Though it has the advantage of offering insulation and, if UV treated, are long-lasting, they are not good at bearing the load of hanging baskets and shelving to any appreciable degree. PVC that is treated to be resistant to ultraviolet radiation is also known as UPVC.

About 80% of the world population live in developing countries and are dependent on agriculture. Agricultural products, just after harvesting, are dried to the safe moisture level. Open solar drying for drying agricultural products is being practiced since ages throughout the world. Due to its several drawbacks as danger of (dust, rain, ultra-violet rays, birds, animals etc.), advance technique, i.e. greenhouse drying, is being adopted for drying crops to reduce the drying time and increase the quality of the food products.

Drying involves a heat and mass transfer phenomenon in which heat energy supplied to the product surface is utilized in two ways: (i) to increase the product surface temperature in the form of sensible heat and (ii) to vaporize the moisture present in product through the provision of the latent heat of vaporization. The removal of moisture from the interior of the product takes place due to induced vapour pressure difference between the product and surrounding medium. The moisture from the interior diffuses to the product surface to replenish the evaporated surrounding moisture.

The working principle of greenhouse drying is in which the product is placed in trays receiving the solar radiations through the plastic cover and moisture is removed by natural convection or forced convection.

Greenhouse drying are being adopted to reduce the losses and to increase the quality of the dried products. Solar energy is the most promising power source of energy for drying of agricultural products. Most of the farmers adopt open sun drying because it is abundant and inexpensive. But the open sun dried products are also subjected to remarkable losses due to environment. Losses of fruits and vegetables are estimated to be 30%-40% during drying under open sunlight. The post-harvest losses can be reduced by adopting advanced means of drying, i.e. greenhouse drying. The greenhouse dryer can be operated in natural and forced mode as required. Studies reveal that the greenhouse dried products are of superior quality and better colour retention as compared to open sun drying.

Flooding

Flooding affects both above and below ground ecosystem processes in greenhouses. Below-ground changes may be less obvious, they are as important as the above-ground changes. Soil microorganisms are sensitive to disturbance, and shifts in soil microbial community structure are expected when anaerobic conditions develop from flooding. The useful aerobic microbes are destroyed by flooding. It takes time to built-up their population in the soil to benefit plants. Due to anaerobic condition created by flooding in greenhouse plant roots in soil are not able to breath, function and hence wilting of plants occurs. Flood irrigation in excess create flood like condition in greenhouses at time. Excess water in soils is a major factor affecting plant survival and functioning. In saturated soils, the supply of atmospheric oxygen into the soil is curtailed and various facultative and obligate anaerobic microorganisms use oxidized compounds as electron acceptors for respiration, thus converting them to reduced forms. The reduction and the associated processes influence plant survival, growth and functioning in wetlands. Flood irrigation should always be just wet the soil not flood inviting stagnation of water.

A chain of reactions is initiated upon soil flooding leading to reduced soil redox potential conditions. These reactions include physical, chemical and biological processes that have significant implications on plants growth. Physical processes include restriction of atmospheric gas diffusion in the soil leading to depletion of soil oxygen and accumulation of carbon dioxide. Shortly after flooding, the limited supply of oxygen in soil pore spaces is depleted rapidly by roots, microorganisms, and soil reductants. This process leads to oxygen depletion and reduction in soil oxidation reduction potential followed by a chain of soil chemical changes. The processes that follow include denitrification, reduction of iron, manganese and sulphate, and changing soil pH

Abstract

The paper deals with taxonomy, ethnobotany and threat status of lesser known liana species Hodgsonia heteroclita (Roxb.) Hook.f. & Thomson. The local people use in terms of foods and rites and its role in ecosystem have been reported. Local people used the seeds of liana as food because of high nutritive value. Threat assessment has been following IUCN version 3.1 to evaluate the threat status of the species in Sikkim Himalaya. Out of the five criteria, data on two criteria could be collected and was used to evaluate the threat category of the species. The criteria used for threat assessment were (a) reduction in population and (b) geographical range in the form of either B1 (extent of occurrence) or B2 (area of occupancy) or both. Considering the population status and geographical range of the species, it has been classified as “Least Concern” (A1acd; B2ab(ii,iv)).

Even though we are now in the atomic age, the idea of the atom is not new. More than 2,000 years ago, the Greek philosopher Democritus suggested that any matter is composed of tiny indestructible particles called Atoms. The word atom is derived from the Greek word Atoms meaning something that can not be cut further. However not much attention was paid to this concept till 1808, when Dalton proposed the famous “Atomic theory”. According to this theory, “all matter is composed of tiny indivisible particles called ‘Atom’. Combining the ideas of Lavoisier, Boyle and his own, Dalton proposed that atoms of elements combine together to make molecules of a compound. This was a great step in the concept of the atom and compounds, since this gave a clear picture of how the supposedly smallest particles of matter called atoms could be put together to form the various familiar substances found in nature.

Validation in the pharmaceutical and medical device industry is defined as the documented act ofdemonstrating that a procedure, process, and activity will consistently lead to the expected results. It often includes the qualification of systems and equipment. It is a requirement for Good Manufacturing Practices and other regulatory requirements. Since a wide variety ofprocedures, processes, and activities need to be validated, the field of validation is divided into a number of subsections including the following:

7.1 Introduction

The rapid population and industrial growth experienced beginning in the middle part of this century has led to spiraling increases in the demand for forest wood. Historical data reveal that there was a 159.6% increase in overall wood production between 1970 and 1993. Wood is defined simply as wood in the rough, and includes trees felled for any purpose. The majority of total wood production has been for use as fuel wood and charcoal, much of which is harvested by villagers, and to some degree urban squatters.

Since 1970, there has been a 160% increase in fuel wood and charcoal production. The largest portion (104%) occurred between 1970 and 1980, which may be attributed to the introduction of fuel wood species earlier, during the Second Five Year Plan period. Looking at the decades to come, the demand for fuel wood is likely to continue growing in pace with future increases in population, which is growing at the rate of 24 % per decade. It is estimated that by the year 2010, demand for fuel wood and charcoal will exceed 33 million cubic meters (FAO, 1993). Since there is expected to be little further change in the area under potential productive forests, there will be an increasing probability of a shortage of wood production in India (Planning Commission, 1992).

17.1 Introduction

Bioenergy is an array of energy produced by biomass (organic matter) including liquid, solid, and gaseous fuels, electricity, heat, steam, biochemicals and materials. Biofuel is any plant derived organic matter available on a renewable basis, including dedicated energy crops and trees, agricultural food and feed crops, agricultural crop wastes and residues, wood wastes and residues, aquatic plants, animal wastes, municipal wastes, and other waste materials. An organic matter such as wood, plants, residues from agriculture or forestry, and the organic component of municipal and industrial wastes that can now be used as an energy source. Today, many bioenergy resources are replenished through the cultivation of energy crops, such as fast-growing trees and grasses, called bioenergy feedstocks.

Cassava (Syn: Tapioca) Manihot esculenta (Crantz) (2n = 2x = 36) (Hindi : Mravuli) is perennial shrub cultivated in tropics for its starchy tuberous roots. It is one of important tuber crops cultivated in tropics because of its high carbohydrate yield per unit land and labour and its adaptation to poor soil and water stress and its tolerance to dominant pest and diseases. Cassava contains cyanide, the toxic principle which limits food and feed value. In cassava the glycoside linamarin and lotaustralin are converted to hydrocyanic acid, a potent toxin, when come in contact with linamerase, an enzyme that is released from rupture of cells. Tuber peel contain significantly higher amount of glycosides than the pulp. It can be removed by cooking in water for about 5 minutes.

Burn wounds are considered to be one of the most devastating kinds of trauma that affect the physical, physiological and psychological well being of an individual. Based on the depth of the affected area, burn wound is divided into three categories: first degree (superficial), second degree (partial) and third degree (full thickness). Extensive and deep burns result in scar formation and subsequent deformation of the affected part. Healing of burn wound involves several interrelated and overlapping stages such as inflammatory, proliferative and remodeling phases. The interaction of a variety of mediators, cells and extracellular matrix proteins are involved in this three phases of healing.

Burn wound therapy has been performed in various ways such as bioengineered skin grafts and administration of growth factors. Small intestinal sub-mucosa (SIS) is a resorbable xenogenic bioscaffold that has induced constructive remodeling in variety of animal models. It is unique from other acellular matrices as it contains few growth factors such as fibroblast growth factor (FGF) and transforming growth factor (TGF) that play a role in the regenerative process. Chitosan is currently proposed to be one of the most promising polymers in wound dressing development and it accelerates wound healing. Epidermal growth factor is known to stimulate growth of keratinocytes in vitro, thus it might be expected to promote wound healing.

In this chapter efficacy of Chitosan and porcine acellular small intestinal sub-mucosal (SIS) matrix seeded with bone marrow derived mesenchymal stem cells (BM-MSCs) and recombinant murine epidermal growth factor (m-EGF) on healing of full thickness burn wound in rat model is described.

The apricot, Prunus armeniaca, L. is a species of Prunus, classified with the plum in the subgenus Prunus. Apricot is believed to have been originated in North-east China and later spread to several parts of the world. The important apricot producing countries are China, Turkey, Italy, Spain, Greece, USA, Morocco, France, Romania, Iraq, Bulgaria, Afghanistan, Pakistan, Iran, India and Australia. In India it is cultivated in Jammu & Kashmir, Himachal Pradesh, Uttarakhand and North East Himalayan region.

Cultivars/Varieties: Hemskerk, Moor park, Kaisha, New Large Early, New Castle, Royal, Raksona, Shiply Early, St. Ambroise, Wenatchee, Chaubattia Alankar, Chaubattia Madhu, Chaubattia Kesri.

Uses

It is used in many ways, such as, in the preparation of jam, nectar, beverages, puree, leather, etc. The karnel is a source of cooking oil. Leaves are used as fodder. Oil cake is used as cattle feed. Dried apricot is an important commercial product.

Ber (Zizyphus) is egg-shaped fruit of orange or brown colour, with edible acid pulp and hard central stone. The Ber, Indian jujube, Z. mauritiana Lam. (syn. Z. jujuba L.) is adapted to warm climates. It belongs to the family Rhamnaceae. It is often called merely jujube, or Chinese date, which leads to confusion with the hardier species. Other English names are Indian Plum, Indian cherry and Malay jujube. In India, there are 90 or more cultivars differing in the habit of the tree, leaf shape, fruit form, size, color, flavor, keeping quality, and fruiting season (Morton, 1987). Ber (Zizyphus pss.) is one of the hardiest fruit trees cultivated in India. It is an ideal fruit crop for arid and semi-arid regions and even for waste lands. Ber has been recognized as a useful edible fruit since mythology of Ram and Shabari in India and depicted in Ramayana. Researchers mention both Z. mauritiana and Z. jujuba and even the wild Z. nummularia.

Cultivars: Umran, Banarasi Karka, Seo, Gola.

Uses

The Jujube is classed with the raisin, date, and fig as a pectoral fruit, being nutritive and demulcent. It is eaten both fresh and dried. Bark is used for tanning. Leaves are laxative and used in throat trouble. Leaves are also used as a good fooder particularly in arid zones. The tree serves as a host for lac insects. Wood is used for making agricultural implements and tool handles. The preserved products made of ber fruit are murabba., candy, diced ber, dehydrated ber, ber pulp, ber jam etc.

Date-palm (Phoenix dactylifera L.). belongs to family Palmae and is the most common tree of desert and dry areas. Date palm is one of the oldest trees known to man kind. Date-palm is believed to have originated in the countries around Persian Gulf. It is extensively grown in Iraq, Iran, UAE, Saudi Arabia, Algeria, Egypt, Libya, Yemen, Mauritiana, Morrocco, Tunisia, Baharin, Sudan, USA, Spain, Australia, Pakistan, South Africa, Somalia, Oman and some parts of the South America. Date is a staple food of the people of the Western Iraq and North Africa. In India, it has been believed to be introduced by soldiers of Alexander the Great in 4^th century B.C. In India it is commercially cultivated in Rajasthan, Punjab, Hariyana and Gujarat.

Cultivars: Deglet Noor, Halawy, Khadhrawi, Hayani, Majhul, Zahidi, Khalaeh.

Uses

Date palms produce many products that are useful to human beings. The primary product is the date fruit, which can be eaten fresh, dried, or in various processed forms. In North Africa and the Middle East, some dates are harvested and consumed during the Khalal stage, when the fruit are still very astringent with a high tannin content (Dowson and Aten, 1962 ; Glasner et al., 2002; Kader,1992). Dates can be used in cereal, pudding, bread, pressed cakes, cookies, candy bars, ice cream, and date shakes (a California specialty). Date fruit also can be made into juice, vinegar, wine, beer, sugar, syrup, honey, chutney, pickle, paste, dip, and food flavoring (Barreveld, 1993; Glasner et al., 2002).

It is said that there are as many uses of dates as there are days in a year. The trunk and wood of date palms can be used as timber, wood, or fuel. Fiber from the trunk and leaves can be made into bags, baskets, camel saddles, cords, crates, fans, food covers, furniture, mats, paper, ropes, trays, and twine. Dried bundles of leaves (‘‘Barusti’’) can be made into shades, roofs, separating walls, and enclosures. Ribs of the leaves can be used to build boats (small fishing boats called ‘‘Shasha’’) or fishing traps. The base of the leaves and fruit stalks can be used for fuel. The pith of the palms can be made into date palm flour. Terminal buds (palm heart) can be eaten as a salad or as a cooked vegetable. Date seeds can be used as feed for livestock or strung as beads for decoration. Oil from date seeds can be manufactured into soap (Chao and Krueger, 2007). Dates are considered a balanced and healthy diet and have several medicinal uses. Leaves are source of fibre used for making ropes baskets and cordage. Walking sticks are made from leafstalk.

Guava (Psidium guajava. L), a highly nutritious fruit very popular as poor man’s apple. Guava belongs to the family Myrtaceae. Guava is native to tropical America and is found growing wild from Mexico to Peru. Spaniards introduced guava in Phillippinnes and the Portuguese in India. Besides India, it also grown in Sri Lanka, Hawaiian Islandsm and Cuba. Guava had been introduced in India by Portuguese in 17^th century, and ever since it is an important fruit crop of India. In many countries it has been spread by birds, where it has been naturalized long back. In India it is cultivated in the plains in almost all the states but the major guava growing states are Maharashtra, Madhya Pradesh, Uttar Pradesh, Bihar, West Bengal, Punjab, Karnatak, Andhra Pradesh, Odisha, Tamil Nadu, Chhatisgarh.

Cultivars: Allahabad Safeda, Lucknow-49, Chittidar, Nagapur Seedless, Bangalore, Dharwar, Akra Mridula, Arka Amulya, Harijha, Hafshi, Allahabad Surkha CISHG1, CISH-G2, CISH-G-3, Harija, Baruipur, etc.

Uses

Guava fruit is relished when mature or ripe and freshly plucked from the tree. Excellent salad and pudding are prepared from the shell of the ripe fruit. Ripe and unripe juicy fruits are eaten fresh. The fruits after removal of seeds, are used for preparing jam, jelly, paste, juice and nectar. It is also canned in sugars syrup and made into fruit butter. In some countries, the leaves are used for treating diarrhea and also for dyeing and tanning.

The jackfruit, Artocarpus heterophyllus Lam. of the family Moraceae, is also called jak-fruit, jak, jaca and, in Malaysia and the Philippines, nangka; in Thailand, khanun; in Cambodia, khnor; in Laos, mak mi or may mi; in Vietnam, mit. It produces the largest known edible fruit. In South-India, it is a common shade tree for many plantation crops. A jackfruit contains 28.7% pulp, 11.5% seed and 59.8% rind, sheath and core.

The place of origin of Jackfruit is not knows exactly, but it is believed to be indigenous to the rainforests of the Western Ghats of India. It is found at low elevations throughout India, Burma, Ceylon, southern China, Malaysia, and the East Indies. It is common in the Philippines, both cultivated and naturalized. It is grown to a limited extent in Queensland and Mauritius. In India it grows in a wild and semi-wild state in Assam, West Bengal, Tripura, Bihar, Uttar Pradesh and states along western Ghats range, particularly Kerala, Karnataka and Maharastra.

Cultivars: Rasdar, Khajwa, Rose-scented or Gulabi, Champa, Hazari, Rudrakshi.

Uses

Both mature and immature fruits as well as seeds are used for various purposes. Ripe fruit is used for dessert purpose and processing into various products, while unripe bulbs are used for making chips. The immature fruit and seeds are used as vegetable. The bark is used for tanning purpose. Heart-wood yield a yellow dye. A yellow dye can also be extracted from the wood particles and used to dye cotton. The latex which flows from all parts of the plant when injured is also used as adhesive. The resins within the latex may also have some value in varnishes. The timber is a medium hardwood with desirable characteristics for making furniture, oars, implements and musical instruments and the wood is also used in construction. It is termite proof and fairly resistant to fungal and bacterial decay. The roots of older trees are good materials for carving and picture framing Leaves are utilized as a green fodder. Several processed products, such as squash, nectar, fruit bar, toffies, jams, canned and dehydrated pulp, beverages, etc. are prepared from the pulp. The seeds can be eaten boiled, roasted or dried and salted as table nuts, or they can be ground to make flour and blended with wheat flour for baking (International Centre for Underutilized crops, 2003).

Longan (Dimocarpus longan Lour), belongs to the family, Sapindaceae. It is a hardy subtropical fruit tree very similar to litchi in habit and appearance. The longan is native to southern China, in the provinces of Kwangtung, Kwangsi, Schezwan and Fukien. The longan is less important to the Chinese as an edible fruit, more widely used than the lychee in Oriental medicine. It is also now widely grown in Thailand, Hong Kong, Taiwan, Vietnam, Myanmar, Indonesia, Malyasia, USA, New Zealand and Australia. The longan was introduced into India in 1798. In India it is mainly grown in Western ghats, Assam and West Bengal.

Cultivars: Most important cultivars of major Longan growing areas of world are Ilao, Wai, and Fuhko No. 2.

Food Uses

Although longan is mainly used for dessert purpose. It can be dried, frozen or canned. Preserved longans are considered by many as superior to preserved litchi, the flavour being more delicate. Longans are much eaten fresh, out-of-hand, but some have maintained that the fruit is improved by cooking. In China, the majority are canned in sirup or dried. The canned fruits were regularly shipped from Shanghai to the United States in the past. Today, they are exported from Hong Kong and Taiwan.

The dried longan product is black, leathery and smoky in flavor and is mainly used to prepare an infusion drunk for refreshment. A liqueur is made by macerating the longan flesh in alcohol. (Morton, 1987).

7.1. Okra or Bhindi (Abelmoschus esculentus L.)

Okra (Bhindi) is a member of Malvaceae family, earlier known as Hibiscus esculentus, and is an annual vegetable crop grown from seeds in tropical and subtropical parts of the world. Okra, also known as “lady finger” or “gumbo”, is a highly nutritious green edible pod vegetable. Botanically, this perennial flowering plant belongs to the mallow family but is grown as an annual. It is named scientifically as Abelmoschus esculentus. Okra originated in tropical and subtropical Africa and India is suggested to be the secondary centre of origin. There are four species under Abelmoschus genus which includes both cultivated and wild forms. They are A. esculentus, A. manihot, A. caillei and A. moschatus. In India, Okra is widely cultivated in states of Andhra Pradesh, West Bengal, Orissa, Bihar Uttar Pradesh, Karnataka, Assam West Bengal, Orissa, Gujarat and Bihar.

Cultivars/Varieties: Okra varieties differ in growth habit, height of plant, presence of purple pigmentation and ridges on fruit. The popular varieties under cultivation in different parts of the country are Arka Abhay, Arka Anamika, Azad Kranti, Co 1, MDU1, Gujarat Bhindi 1, Harbhajan Bhindi, Hisar Unnat, Parbhani Kranti, Perkins Long Green, Punjab 7, Punjab 8, Punjab Padmini, Pusa A 4, Pusa Makhmali, Pusa Sawani, Red Bhindi, TN Hybrid 8 and Varsha Uphar. Besides, a number of hybride from many private sector agencies/seed companies are marketed. Of these, Varsha, Vijay, Adhunik, Panchali, Hybrid No. 6,7 and 8, Nath Sobha, Supriya, Sungro 35, Aroh 1, - 2, -3, -9 and are more popular.

Uses

Different parts of the plant are used for different purposes. Abelmoschus moschatus Medik. Leaves and seeds are considered as valuable traditional medicine. Abelmoschus moschatus is also called ‘musk okra’ a medicinal plant belonging the same family. The leaves and new shoots of this plant is also used as vegetable. The aromatic seeds of this plant are aphrodisiac, ophthalmic, cardio tonic, antispasmodic and used in the treatment of and intestinal complaints and anxiety.

Square-Root Transformation for Counts

stabilizes the variance more effectively.

Counts of rare events, such as number of defects or of accidents tend to be distributed approximately in poisson fashion.

The experimental design and analysis discussed in previous chapters refer essentially to experiments on annual crops. Even when these experiments are repeated in different years, this is done at a new site each year .The use of new crop production practices will generally change the important physical and biological factors of the environment. This process of change can take many years. Generally, the productivity of some types of technology must be evaluated by a series of trials repeated over time. Such trials are generally referred to as long-term experiments. Long-term experiments are those which are continued on the same set of plots over a series of years with a pre-planned sequence of treatments or crops or both. Treatments may be applied every year or periodically. The same crop may be repeated year after year or once planted may continue for several years as perennial trees ,or a sequence of crops may be grown in rotation as for instance rice-rice or rice-wheat (1 year sequence with 2 crops per year ) or sorghum,groundnut,cotton and wheat, each crop cycle being completed in four years. The main features of long-term experiments are as follows :

In many experimental situations, it becomes necessary to repeat an experiment over time, (for a number of seasons or years). This repetition (or replication) of the experiment broadens the scope of the experiment in the sense that our recommendations will be applicable for a number of seasons. In the case of agricultural experiments, for example, there may be present treatment x season interaction. So the results of a series of experiment, performed for different seasons with the same set of treatments, will have wider applicability.

We shall consider the simplest case of a repetition of experiments of identical structure for a number of seasons. Let us consider randomized block experiments with t treatments in r blocks and conducted in p seasons. The analysis of the experiment in a season is based on the linear model. Before attempting a combined analysis for the p experiments, it is necessary to perform the analysis for p experiments separately and interpret the results separately. It may be of interest to find out whether differences among the treatments are the same in the different seasons so that ‘ best ‘ treatment may be recommended for all seasons or whether different treatments are to be recommended for different seasons.

We next consider the analysis of the combined experiments considering the seasons as a random sample from the population of seasons. Analysis of Variance of series of experiments

Where Y is the average yield of a crop in a sequence over a period of years “n” and S is the standard deviation of yield over a period of years, Y max is the maximum yield of a crop in a certain year.

Example 1. Six crop sequences were evaluated in simple randomized block design replicated four times at Durgapura. The sequences tried are pearl millet-wheat, cluster bean-wheat, pearl milletmustard, cluster beanbarley, cowpea-mustard and pearl millet-Chickpea under irrigated conditions.

A sample is just a part of a population selected according to some rule or plan. Following are some of the methods of sampling.

1. Simple Random Sampling

The simplest and the most commonly used type of probability sampling is simple random sampling. In this kind of sampling, each member of the population has the same probability of being included in the sample. Simple random sampling may be with or without replacement.

5.1 Graphical Representation of Data

Diagrams are generally useful for the purpose of publicity and propaganda. No statistical conclusion can be drowning as these provide only an approximate and rough expression about the phenomenon. Thus for a more rigorous and improved representation of numerical statements graphs and charts are used.

Graphs are generally drawn with the help of two perpendicular lines known as x-axis and y-axis. The following are the various types of graphs, which are in common use:

6.1 Correlation

The term correlation indicates the relationship between two such variables in which with changes in the values of one variable, the values of the other variable also change. In short, the tendency of simultaneous variation between two variables is called correlation.

8.1 Introduction

The normal distribution was discovered by De Moivre in the year 1733. Normal distribution is probably the most important of all theoretical distributions for the reason that so many physical measurements and natural phenomena have observed frequency distributions which very closely resemble the normal distribution.

The status of gardening during ancient time has been presented in Ramayana, written by Valmiki. Ayodhya city was described as having wide streets, large houses, richly decorated temples and gardens. These gardens were planted with fruit trees and flowering plants and had lakes full of lotus (Nelumbo sp.) and different kinds of birds. During exile, Lord Rama and Sita are believed to have observed a number of trees and were fascinated by beautiful flowers; one of them was Sita Ashok (Saraca asoca).

Mahabharata, written by Saint Vyasa also contains description about gardens. During the Mahabharata era, pleasure gardens were planted with flowering plants. The famous tree of this era was Kadamba (Anthocephalus cadamba), which is associated with Lord Krishna.

The systematic gardening in India is as old as civilization of Indus of Harappa, which existed between 2400 B.C. and 1750 B.C. At that time, people were living in well-planned roads cut across one another almost at right angles. There are many evidences which prove that trees and ornamental plants were associated with the Harappan civilization. India has a long history of close association of people with flowering plants. It begins with the arrival of Aryans to India in 1600 B.C. They were literate people and brought with them the four Vedas viz., Rig veda, Atharva veda, Yazur veda and Sam veda and the Puranas. They appreciated the beauty of flowering plants, lakes, mountains, forests, etc. and named their children after flowers like Kamal, Champa, Bela, Chameli, Rukmani, etc. The followers of Hindu religion worship their Gods and Goddesses with flowers early in the morning.

The life of Lord Buddha was associated with a number of trees from birth to his Nirvana. He was born in 563 B.C. under the tree of Ashoka (Saraca asoca) at Lumbini. Further, Buddha attained his enlightenment under a Pipal (Ficus religiosa) tree, spread his new teachings under shady banyan and mango trees and breathed his last in a Sal (Shorea robusta) grove.

When Lord Buddha visited Vaishali, Amrapali presented a park known as Amravana which was dominated by flowering trees. Buddhists were planting trees and flowering plants on a large scale for making surrounding peaceful and place ideal for meditation.

Landscaping is an art of beautifying a piece of land or a landscape with planting material, non-living material in order to create a picturesque effect or to imitate nature. Landscaping makes a place more peaceful, beautiful, appealing or pleasing, where people can rest and enjoy with their family, friends, etc.

Landscape gardening is landscaping of a garden. More or less landscape gardening and painting on a canvas or paper sheet is similar. In both cases colours are used to form a picture, only difference is that painting is non-living 2D image and garden is collection of living plants with non living things in 3D form.

When going for landscaping, one can put anything or collection of different articles of interest in a place. It requires proper planning and for planning landscape, there are principles or facts that should be followed. It is not necessary and also possible to follow all the principles at a time in a landscape plan but there are 8 basic principles one should follow during landscape planning, which are discussed below.

Definition: Ferns are flowerless plant that has feathery or leafy fronds. These are reproduced by spores released from the undersides of the fronds.

It is a member of a group of about 10,560 known extant that differ from mosses by being vascular (i.e. having water-conducting vessels). Like other vascular plants, they have branched stems and leaves.

A wide range of beautiful plants exist among ferns which are very popular worldwide. Ferns are grown for their beautiful foliage and their gracefulness. Most of the house ferns are native of tropical regions and are ideal for indoor planting, as they can grow well under shaded or semi-shaded situations. Many species of ferns are native to India. Some of them can be easily grown while others are much difficult, but can be grown well preferably under suitable growing media and proper management.

Definition: Flower arrangement may be defined as the art of organizing and grouping together flowers and plant materials to achieve harmony of form, colour and texture.

Types of flower arrangements

A. Japanese or oriental/eastern type: Japanese flower arrangements also called ‘Ikebana’ (Ikebana, also called Kado). Emphasis is given on spiritual and religious background and only few flowers are used. “Ikenabo” was the first school of Ikebana, meaning “the arrangement of flowers of the hermitage along a pond” which was started by Buddhist monk Semmu around A.D. 621. Ikebana was practiced by Buddhist monks as a concentration exercise (Dhyana). There are three basic lines that were followed in Ikebana namely, Shin meaning heaven is generally a central vertical line of the main branch in the arrangement. Whereas, Soe meaning man is the secondary branch symbolizes human kind. Ikebana artists position Soe to grow forward from the Shin line at a right angle. Third is, Hikae, symbolizes earth is arranged at the bottom, opposite the first two elements. In India, Ikebana was introduced during sixties and gradually becomes popular.

Fruits and vegetables play an important role in balanced diet. These provide not only energy rich food but also provide vital protective nutrients/elements and vitamins. Comparatively fruits and vegetables are the cheapest source of natural nutritive foods. Since most of Indians are vegetarians, the incorporation of horticulture produce in daily diet is essential for good health. Realizing the worth of fruits and vegetables in human health, Indian Council of Medical Research (ICMR) recommended the use of 120g fruits and 300g vegetables per capita per day. With the growing awareness and inclination towards vegetarianism worldwide the horticulture crops are gaining tremendous importance.

Functions of fruits and vegetables in human body

Fruits and vegetables provide palatability/taste.

Improves appetite and provides fiber to overcome constipation.

They neutralize the acids produced during digestion of proteins and fatty acids.

They improve the general immunity of human body against diseases, deficiencies etc.

They are the important source of vitamins and minerals for used in several bio-chemical reactions occur in body.

Soil- Soil is the upper most crust of earth surface which supports plant growth. It is defined as a three phase system in which plants grow. These phases are solid, liquid and gas and are essential. Solid part is frame which provides space for other two. This consists of minerals, clay minerals and organic matter. The soil is also a living system with millions of microbes that breakdown organic matter and builds it again.

Some points are following

Microbes are essential and survive only when soil is well aerated and rich in organic matter and devoid of waterlogged conditions.

Texture of soil depends on the size of solid particles and classified as gravel, coarse and fine sand, silt and clay.

Soils are classified according to relative distribution of these particles and there are 12 textural classes.

Likewise, arrangement of these particles is referred as structure, and both texture and structure lend soil physical properties like water holding capacity, aeration and bulk density.

Generally loamy soils and crumb structure are most preferred for fruit crops.

According to level of organic matter, soils are classified as mineral soil or organic soil and soil having more than 20% organic matter is organic soil like peat and muck.

Water

Water is one of the most important inputs essential for the production of crops. Plants need it continuously during their life and in huge quantities. It profoundly influences photosynthesis, respiration, absorption, translocation and utilization of mineral nutrients etc. Both its shortage and excess affects the growth and development of a plant directly and consequently its yield and quality.

Soil needs the application of water to:

Remove stress condition.

Release nutrients in the soil solution for absorption by plants.

Leach or wash out injurious salts from the soil.

Preparation of land for raising crops.

To maintain the temperature and humidity of the soil micro-climate and the activity of soil microbes at optimum level.

For the normal aeration and functioning of roots and shoots of the plants.

Excess water needs to be removed for the normal aeration and functioning of roots and shoots of the plants

Excess water creates unworkable soil condition.

Mulching

It means covering of soil surface by some organic or inorganic materials for conserving the soil moisture besides covering on the soil moisture several other advantage of mulching. The materials which are used in mulching called mulch.

The quantitative increase in plant body such as increase in the length of stem and root, the number of leaves etc., is referred to as plant growth whereas, the qualitative changes such as germination of seed, formation of leaves, flowers and fruits, falling of leaves and fruits is referred as development. Utilization of these substances for proper development of the plant is regulated by certain chemical messengers called plant growth substances or plant growth regulators, which in minute amounts increase or decrease or modifies the physiological process in plants. Plant growth substances are the chemical other than nutrient which required in very small amount but without which plant can not complete their physiology.

The two sets of internal factors, viz., nutrition and hormone control the growth and development of the plant. The raw material required for growth is supplied by nutritional factors which include the minerals, organic substances the protein, carbohydrates, etc.

Phytohormones: These are the hormones produced by plants which in low concentrations regulate plant physiological process. These usually move within the plants from a site of production to a site of action.

Plant growth regulators: These are organic compounds other than nutrients, which in small amounts promote, inhibit or otherwise modify any physiological process in plant.

It may be defined as any organic compounds which are active at low concentrations (1-10 ml) in promoting, inhibiting or modifying growth and development in plants. The naturally occurring (endogenous) growth substances are commonly known as plant hormones, while the synthetic ones are called growth regulators.

Plant hormones: It is an organic compound synthesized in one part of plant and translocated to other parts, wherein very low concentration causes a physiological response.

The plant hormones are identified as promoters (auxins, gibberellin, and cytokinins), inhibitors (abscisic acid and ethylene) and other hypothetical growth substances (Florigen, death hormone, etc.).

Seed

A seed is a mature ovule consisting of an embryo together with stored food, all enclosed by a protective coat. It is product of the ripened ovule of gymnosperm and angiosperm plants which results as a consequence of fertilization and some growth within the mother plant formation of seed completes the cycle of reproduction. The embryo develops from zygote and the seed coat from the integument of ovule. A seed has three main parts these are seed coat, endosperm and embryo. Embryo includes the root, the cotyledon and embryonic leaves. Seed is located inside fruit and a fruit is a mature ovary. In broad sense any plant part which is used for commercial multiplication of crop is called seed. Thus in case of potato stem and tuber are also known as seed. Improved seed results in (1) Better germination (2) Vigorous seedling growth (3) Higher crop stand (4) Better quality of produce (5) Ultimately in higher crop yield.

Development of seeds: Successful pollination and fertilization are the prerequisites to produce a viable seed. During pollination the pollen grains are transferred from anther to the stigma and get stuck there in the sticky fluid secreted by the stigma. The fluid contains sugar which induces germination of pollen grains. The pollen tube grows downward through the style in the ovary until it reaches the embryo sac and discharges two male gametes-one is fused with a female gamete and forms the zygote (2n) and the other is united with two pollar nuclei to produce endosperm (3n). The zygote develops and gives rise to embryo embedded in nutritive tissue developed from endosperm. The nucellus tissues surrounding these structures provide necessary energy for their proper development. Like fruit, the seed also exhibits sigmoid and sometimes double sigmoid pattern of growth. Various changes occur during the course of seed development and the sequences of development may vary from species to species keeping the basic theme unaltered.

The purpose and the mode of marketing of vegetables determine the type of vegetable gardening. The various types of vegetable gardening are as follows.

Home or Kitchen gardening

Market gardening

Truck gardening

Processing gardening

Vegetable forcing

Seed production gardening

Floating vegetable gardening

Lawn

Lawn is a natural green carpet, and it is important feature of a landscape and a garden without a lawn is not considerd complete. Lawn is an area of land closed mowed grasses it is primarily developed for aesthetic and recreational purpose. A lawn is an integral part of a garden and landscape besides aesthetic and recreational purpose and several other purposes. Lawn provides a place for taking rest after tiring of the day, holding parties, social functions, passive and active recreation. Distinguishing characteristic of turf grasses is the ability to with stand close mowing and still providing a functional dense healthy ground cover. Lawn is also called as heart of garden. Lawn can be called as turf pitch a field, sod, yard, are green depending upon the plantation usage continent. Lawn is a ground cover of perennial grass, ditch, persists enclose mowing and require proper management practice.

J.B. Olcoth designed first experiment in lawn grass at Monchester in USA in the 19th century. Festuca and Agrostis species were used to make turf (Lawn) during 1880 in U.K. In the early 19th century lawn become wild spread out side of parks golf course. Now a day in many metro cities of India lawn has become a cultural of the passion of many homes.

Garden

Garden is a place where vegetables, fruits and ornamental plants are grown mainly for recreation. The garden incorporates both natural and man-made materials.

Types of garden

The major garden types which shall be discussed are: English garden, Mughal garden, Persian garden, Italian garden, French garden, Japanese garden etc. Out of these the Mughal, Persian, Italian and French styles fall in the category of formal gardens, whereas the English and Japanese gardens are classified in the informal style of gardening.