eChapters

Ornamental Industry

Floriculture as a multi-billion dollar industry has been undergoing unique revolution in terms of production and marketing of high value ornamentals such as cut flowers, loose flowers, potted and foliage plants there by emerged as fully export oriented activity. Owing to the steady increase in demand of flowers, floriculture has become one of the important commercial businesses in horticulture. Presently, floriculture industry in India has been growing with compound annual growth rate of 25 percent over the past decade (Muthukumaran, 2009). It has been found that commercial floriculture has higher potential per unit area than most of the field crops and therefore, it is a lucrative business. Indian floriculture industry has been shifting from traditional flowers to cut flowers for export purposes.Maharashtra, Karnataka, Andhra Pradesh, Haryana, Tamilnadu, Rajasthan, West Bengal have emerged as major floriculture production areas. The export of floricultural products from India has been on an increase in the past five years due to high demand for floriculture products in importing countries. The estimated total area under floriculture in India is 2,82,000 ha. Tamil Nadu stands first followed by Karnataka and Andhra Pradesh, West Bengal, Maharashtra, Rajasthan, Delhi and Haryana. Approximately 16,57,000 metric tonnes of loose flowers and over 5,20,000 metric tonnes cut flowers are produced in India during 2015-16. Total export of floriculture products is 22,518 MT with value of 479 crores (APEDA, 2015). Major importers of ornamental products from India are USA, Germany, UK, Netherland, and UAE.

Introduction

Horticulture plays a significant role in Indian Agriculture. It contributes 30% GDP from 11.73 % of its arable land area. India is the second largest producer of both fruits and vegetables in the world (52.85 Mt and 108.20 Mt respectively). Being rich source of carbohydrates, minerals, vitamins and dietary fibres these constitute an important part of our daily diet. The dietary fibres have several direct and indirect advantages. Not only this, fruits and vegetables provide a variety in taste, interest and aesthetic appeal. Their significance in human life is being recognised increasingly in societies with the objective of minimizing the occurrence of the diseases related with an affluent life style.

Abstract

Vegetable cultivation has been threatened due to limited availability of arable land and frequent vagaries of environment and incidence of soil borne pests and diseases. Development of stress tolerant or climate smart cultivars through conventional breeding methods or dependence upon agrochemicals for mitigation of pest and disease problems for vegetable crops have been practised since time immemorial. Salinity in coastal belts, high or low temperature injury, bacterial wilt in solanaceous vegetables, Fusarium wilt and nematode infestation in cucurbits are common of the many maladies which have caused tremendous loss in productivity and quality of vegetable crops throughout the globe. 

Introduction

Stress is usually defined as an external factor that exerts a disadvantageous influence on the plant. In most cases, stress is measured in relation to plant survival, crop yield, biomass accumulation or the primary assimilation processes (CO₂ and mineral uptake), which are related to overall growth. Stresses can be biotic, imposed by other organisms or abiotic arising from an excess or deficit in the physical or chemical environment. Biotic stress arises by attack of bacteria, viruses, fungi, invertebrates and even other plants, whereas abiotic stress occurs due to drought, water logging, high or low temperatures, excessive soil salinity, imbalance of mineral nutrients in the soil, heavy metals and too much or too little light. Stresses trigger wide range of plant responses, from altered gene expression and cellular metabolism to changes in growth rates and crop yields.

Introduction

Stress in physics is any force applied to an object. Stress in biology is any change in environmental conditions that might reduce or adversely change a plant’s growth or development. ‘Stress’ or ‘pressure’ was introduced into the theory of elasticity as an amount of force for a given unit area. When sufficient force is applied to material, the material bends and the change in length is termed ‘strain’. With increasing stress, the initially linear relationship between stress and strain becomes nonlinear until the proportionality limit, after which the material deforms elastically (it can bend back), then plastically (it cannot bend back) until it ruptures. Since the 1930s, biologists have attempted to apply this terminology to biological systems, albeit the nature of the stresses will vary between nonliving materials and organisms.

1. Introduction

Stress-Any deviation from this optimal condition of any factor essential for its growth will lead to aberrant change in physiological processes and due to this plant body will experience tension and this state can be referred as plant under stress.

In physics, stress is defined as mechanical force per unit area applied to an object. In response to the applied stress, an object undergoes a change in the dimension, which is also as strain. However, the biological stress is defined as an advance force or a condition, which inhibits the normal functioning and well-being of a biological system such as plants. There are several abiotic and biotic factors, which under a given condition, may be perceived as stress by plants.

Introduction

India is gifted with varied agro-climatic conditions for growing an array of vegetable crops to combat the present ill-balanced diet. The brinjal belongs to the family Solanaceous and to the genus Solanum, species melongena. The egg plant, Guinea squash are some synonyms to brinjal. It is a hardy crop and does best in worm and moist climate. The crop is generally grown twice or thrice in a year. The edible part, fruit is of high nutritive value and can well be compared with tomatoes. Insect pest constitute the major limiting factors in the successful production of brinjal. Pest comples of brinjal is very high and aphid (Aphis gossypii) causes heavy damage to the crop. Aphis gossypii (Hemiptera: Aphididae) is a tiny insect or greenfly in the superfamily Aphidoidea in the order Hemiptera. It is a true bug and sucks sap from plants. It is a widely distributed pest of a variety of agricultural crops in the families Cucurbitaceae, Rutaceae and Malvaceae.

Introduction

The fruit crop acreage in Kashmir is rapidly increasing and is developing into perennial stretches of monocropping systems. The area of apple in Kashmir 143790 ha. Parallely this has led to increased pests and use of chemical pesticides. As a result, pest resurgence, pesticide residue in fruits, deleterious effect on biological agents and resistance build-up in insects have all complicated pest management (Smith, 1970).In view of the rising export potential of residue free fruits and the crisis situation created by indiscriminate use of pesticides, fruit crops need much more attention in terms of IPM input than what is getting now. It is therefore, necessary to develop and follow a rational approach with greater reliance on IPM to promote sustainability and to reduce the number of application of hazardous chemicals. Integrated pest management requires thorough preplanning even before establishing the fruit orchard which includes selection of suitable site,siol type, improved and pest free scion varieties, resistant rootstock compatible with scion, regular pest and weather monitoring in the orchard, balanced use of fertilizers, water management, proper training and pruning, improved cultural practices,augementation and conservation of parasitoids and predators and need based application of selective insecticides.The various strategies for successful management of economically important pests of temperate fruits are thoroughly discussed.

Introduction

Pests and diseases are very serious issues in vegetable crops and account for nearly 25-30% damage to the expected yields across different crops inspite of high amount of chemical use. Excessive reliance on chemicals has created problems of pest resistance to pesticides, decimated useful fauna and flora as well as imperilled the delicate ecological balance. In addition, pesticide treadmill lures the farmers for ever increasing use of pesticide dosages, thereby encouraging a vicious cycle of environmental pollution. Vegetable crops are one of the major groups of crops that contribute heavily in this regard, being the third major consumers of pesticides after cotton and rice in our country. Insect pests and diseases inflict the horticultural crops especially vegetable crops more than others because of their supple nature, intensive cultivation under high moisture and input regimes, short duration and denser canopy of the crops.

Abstract

We studied the mathematic model of “predator-prey” and„ pest-parasite”. Under the circumstances when these two specious coexist in particular conditions. In that case the components of the system continuously change. We describe the system by two differential equations which conclude into numeral equation by integrators and variables. According these equations we calculate some numeral formulations essential to these changeable populations.
  
We produce the prevalence of predator-prey systems by using analytic and quantitatic methods for massive rage of data. This process as usual is described by the differential equation consisting assembling point. The constructed phase portrait which we need to solve the problem is found by Runge-Kuta method. So the article speaks about the conformity with a law which we receive by permanent change of parameters’ menaings and temporal changes of biological systems’ conditions.

When there is no positive steady state both prey and predator can become extinct. In one particular case both species become extinct regardless on the initial data. In the second, both species will die out only if initial prey/predator ratio is too low. Otherwise, only the predator goes extinct, while prey tends to carrying capacity.

Abstract

Roselle, or Jamaica sorrel (Hibiscus sabdariffa L.) is a popular vegetable in many tropical regions, cultivated for its leaves, seeds, stems and calyces of which, the dried calyces are used to prepare tea, syrup, jams, jellies and beverages. It is an annual herbaceous shrub belongs to family Malvaceae originated in old world tropics. The fresh calyces and young leaves are used as a vegetable in various cuisines and the plant also yield industrial bio fibre. It also has nutraceutical potential, high pigment content, and nutritional and medicinal properties. Roselle is a drought tolerant crop and cultivated throughout the tropics and subtropics during hot and rainy seasons. China and Thailand are the largest producers and control much of the world supply, where as the best quality roselle comes from Sudan. Many medicinal applications of this plant have been developed around the world. It is used to treat hypertension, pyrexia, dyspepsia, and leukaemia hepato protective, due to its high content of protocatechuic acid. Leaves are emollient and sedative and also show antihypersensitive, antihyperlipidimic, diuretic and anti oxidant properties. Hence, it is an ideal candidate crop for low input multi-cropping system for the food and nutritional security for developing countries.

Abstract
 

Ensure enough food and water to the growing world population and preserve the biodiversity of our planet are among the major challenges of our immediate future. These challenges are essentially addressed to the agricultural world, which is constantly evolving to satisfy the most basic needs of the humankind. The approaches and the possible answers to these big challenges are many and, even if partial, each sustainable solution or innovation can contribute to improve the quality of our life. To overcome the barriers for food and nutritional security microgreens is one of the possible innovative approach in this 21st century. A microgreen is a young vegetable green that is used both as a visual and flavor component or ingredient primarily in fine dining restaurants. Fine dining chefs use microgreens to enhance the attractiveness and taste of their dishes with their delicate textures and distinctive flavors. Smaller than “baby greens,” and harvested later than sprouts, microgreens can provide a variety of leaf flavors, such as sweet and spicy. They are also known for their various colors and textures. Among upscale markets, they are now considered a specialty genre of greens that are good for garnishing salads, soups, plates, and sandwiches.

Abstract

In the recent past we have seen a great upsurge in the production and productivity of food grains as well as horticultural produce which is sufficient to feed our burgeoning population. This way we are self-sufficient to feed our population, but now the major challenge before us is to ensure the nutritional security of each and every individual of the country. Moreover, meeting nutritional security through conventional or molecular breeding demands long time. However, this could be achieved in much shorter period of time i.e., within 2-3 weeks by growing microgreens.Microgreens can be easily characterised by having a central stem with two fully developed cotyledon leaves and mostly one pair of small true leaves.In comparison to their mature counterparts, microgreens of a variety of vegetables and herbs have been reported to be more nutritious. They are rich in ascorbic acids, carotenoids, phylloquinone and tocopherols, which is responsible for its antioxidant properties and also plays a vital role in weight gain modulation, cholesterol metabolism. It may also protects from cardiovascular diseases by preventing hypercholesterolemia. Main problem associated with microgreens are their high price and high perishability and lack of awareness among people about its cultivation practices and health benefits. It demands great attention from the scientific community, to address these problems and make it available in each and every household to ensure the nutritional security of the nation.

Introduction

The demand for agriculture commodity is growing world over and meets the ever increasing targets as per the demand, productivity needs to be raised further. This can be realized in two ways- by increasing area of cultivation and/or through increased efficiency of inputs (both natural and manmade). The scope for the farmer is very limited worldwide and for the latter, the primary input is the solar energy which is most abundant except in few cases like colder regions. In the coming future, the availability of land for cultivation will be a major impendent due to rapid urbanization, hydroelectric projects, dams and rivers, highway roads and also there is a degradation of fertile land due to soil erosion (120.72 million ha), soil salinity and water logging (8.4 million ha) Nath et al., 2007 and Hegde et al. (2015).  Under this situation, multi-storied cropping system will be a viable option to provide food, nutrition and income security to people Awasthi et al., (2008). The available arable land could be effectively utilized for production of field and horticultural crops to achieve nutritional security for the growing population and sustainable income for the farming community. Increasing food production with limited natural resource is a great challenge to the scientific community. Thus, production per unit area of land, time and inputs can be increased by improving efficiency of the rate and extent to which solar energy is harvested for conversion to economic produced.

Introduction

Crop regulation is also known as flowering/ fruiting cycle management. It can also be termed as management of vegetative-reproductive balance. Some of the fruit crops bloom throughout the year without any resting period and produces two or three crops (bahar) in a year but yield and quality is not so good in all crop harvest. It is very essential to understand the flowering and fruiting behavior of crops and which bahar will give good crop with considering all the factors associated with a particular bahar. It is important for the available time to be partitioned to give an appropriate balance between the making of sources of resources which capture and utilized resources efficiently in generating harvestable yield and the filling of sinks for resources; and sink must mature in desired time for harvest. Apart from their importance in the determination of crop yield

The first step of sexual reproduction (Flowering) is of paramount importance in agriculture, horticulture and plant breeding. The change from the vegetative state to the reproductive state is one of the most dramatic events. Flowering leads to an exciting succession of events like anthesis, fruit set, fruit development, maturation and ripening. It provides for the propagation of the species and assists in crop improvement through genetic recombination. Plant growth regulators have remained an important component in horticulture, agriculture from time immemorial, because they were effective means of quantitative as well as qualititative improvement in growth and development of crops. Plant growth and development as well as the responses to environmental factors, are highly regulated by complex and coordinated action of the endogenous hormones (Reddy and Bhagwan, 2014).

Abstract

Mango (Mangifera indica L.) is the one of the most important fruit crop of tropics and subtropics. Mango belong to group of plant in which there is an antagonism between vegetative vigour and flowering intensity. Therefore, any factor that reduces vegetative vigour without altering the metabolic activity and favors flowering which can be possible by the use of growth regulator. Growth retardant that has been widely used in mango crop is paclobutrazol (PBZ) or cultar. Paclobutrazol is N-containing heterocyclic, trizole compound which stimulate flowering by inhibiting gibberellic acid pathway by inhibiting oxidation of ent-kaurene to ent-kaurenoic acid by blocking cytochrome P450 dependent monooxygenase enzyme. It is applied at the rate 2-5g/m of canopy diameter 3-4 months prior to desired date of flowering either by foliar spray, soil drench or trunk application. However, soil application is found more efficient on mango quality production than other. Paclobutrazol has pleiotropic response on mango cultivars. It has been found that application of paclobutrazol is effective in enhancing the protein mobilisation, starch, carotenoid, lycopene, phenol and cytokinin, abscisic acid and enzyme content in treated plant that induce flowering. It has been found that paclobutrazol is capable to reduce mango malformation and make plant tolerant in stress condition.

Mango (Mangifera indica L.) is one of the most important tropical fruits of the world and is commonly known as the ‘King of fruits’ for its high quality fruits which are very popular among the Indians (Sharma et al., 2008). It is an oldest and extensively cultivated fruit crop in India having high socio-economic significance. India is the home of about more than 1000 mango varieties, which originated in the Indo-Burma region (Mukherjee, 1958). India is the largest producer of mango, grown in about 2.3 million hectares with an annual production of 15.02 million tonnes. However, its productivity is only 6.5 tonnes ha against 30 tonnes per ha in Israel. Improvement of productivity in mango continues to be the foremost issue in mango production (Sauco, 1993). Of late, all the mango importing countries are considering the India as a source of quality mangoes due to its varietal wealth and availability. Hence, it is imperative to improve the productivity and quality of Indian mangoes to meet the global need (Balamohan and Gopu, 2014).

Canopy management is the manipulation of tree canopies to optimize the production of quality and quantity fruits. The canopy management, particularly its components like tree training and pruning, affects the quantity of sunlight intercepted by trees, as tree shape determines incoming radiation. Light is critical for growth and development of trees and their fruits. The green leaves harvest the sunlight to produce carbohydrates and sugars which are transported to the sites where they are needed – buds, flowers and fruits. Better light penetration into the tree canopy improves tree growth, productivity, yield and fruit quality. The density and orientation of planting also impact light penetration in an orchard (Proietti et al., 2000). Generally, in close planting, quicker shading becomes a problem. An east-west row orientation results in more shading as compared to the western and southern orientation of trees. The problem of a fruit grower is initially to build up a strong and balanced framework of the trees, then equips them with appropriate fruiting.

Abstract

Plant architecture, plays a crucial role in gathering multiple resources from the environment. As a plant grows, they change its architecture with the surrounding environment for altering available resources. The architecture of the plant is modified through the distribution of assimilate, which conclude the growth rates of different organs. Plant roots expand to acquire soil water and nutrients (e.g. nitrogen, phosphorus) from different soil layers by adjusting their direction in order to growth which transported and allocated to whole plant for maintenance and expansion of plant organs. All plants gradually develop their architecture according to source–sink activities and endogenous signals. This adaptation can result in complex structures. This chapter deals with the importance, different method for changing the architecture   of vegetable crops for improving their yield and quality.

Introduction

High density planting in fruit trees was first introduced in case of apple in Europe during the nineteen sixties, with the development of Malling and Malling - Merton rootstocks. Subsequently, this was experimented in other temperate fruit crops like peach, plum, pear and sweet cherry. Today, majority of new orchards of apple and to some extent that of other fruit crops in Europe, New Zealand, USA and Australia use this intensive system of fruit production profitably Iyer and Kurian (2006). The successful management of trees in any high-density planting system depends on maintaining a balance between vegetative growth and fruiting.

Soil and nutrients are important factors for sustainable crop production in agriculture. Water erosion contributes more than 60% to the area under soil degradation in India. Soil erosion has been a serious threat to sustainable agriculture. However, soil and water conservation measures plays important role in improving the productivity of natural resources. India presently supports 17% of the global population with a geographical area of 329 Mha on merely 2.5% world’s land area and 4% fresh water resources. The net cultivable area in the country is about 140Mha is remaining constant or even squeezing from the pressures of urbanization, industrialization, infrastructure development and to house the ever increasing population. The loss of productive soil is another concern. The loss of fertile top soil by water erosion is estimated to be about 5334 Mt per year with it nearly 8.4 million tonnes (mt) of nutrients was estimated in eroded soil still holds true about in i.e. 2.5 mt nitrogen, 3.3 mt phosphorus and 2.6 mt potassium per hectare is lost due to ill soil and water management practices (Dhruvanarayana and Ram Babu, 1983).

Soil microorganisms are believed to play a major regulatory role in organic carbon dynamics, as key architects in nutrient transformation, and physical engineering of soil structure. The microbial populations of the soil alone encompass an enormous diversity of bacteria, algae, fungi, protozoa, and actinomycetes. Microbial diversity is being regulated by substrate and water availability, temperature, climatic regime and soil structure, which is considered as a transformation agent for soil organic matter and a labile pool of organic and inorganic nutrients. Extensive cultivation with repeated tillage operation often disrupts soil aggregates stability and destroys aggregates carbon and therefore, soil lose their physical properties and nutrient supplying capacity in a long-run.

Introduction 

Conservation tillage has been defined based on percent cover of the soil surface with crop residue (CTIC, 2000). Quantifying crop residue cover on the soil surface is important for improving estimates of surface energy balance, net primary productivity, nutrient cycling, and carbon sequestration. Quantifying crop residue cover is also an important factor in controlling soil erosion and evaluating the effectiveness of conservation tillage practices (Barnes et al., 2003). Collecting this information by conventional method of survey and line transact are time-consuming, labor intensive, costly and can involve destructive sampling (Morrison et al., 1993). Moreover, field data are limited because they provide point, rather than area information. Remote sensing technique revealed as promising tool in providing such spatial data over a large area in a time and cost-effective manner.

Introduction

In general economic model, technological change in agriculture is expected to cause the commodity supply curve to shift down and out against a stationary demand curve, giving rise to an increase in quantity produced and consumed, and at a relatively lower price. Agricultural economists have used supply and demand models of commodity markets to represent agricultural research impacts, beginning with Schultz (1953) and Griliches (1958), with important subsequent contributions by Duncan and Tisdell (1971), Akino and Hayami (1975), among others. Such a model is explicitly used in many studies. However, low crop productivity, food insecurity, hunger and malnutrition; inadequate farming knowledge and skills, implements and inputs are characteristic of smallholder agriculture in developing countries including India. Many researchers argue that conservation agriculture can guarantee higher crop productivity, food security, improved net income of the farmers and environmental protection, better than the traditional systems of cultivation practices.

Introduction

Modern agriculture has been of great help in alleviating hunger from the world, because the world population more than doubled itself during the last half of the 20th century; it increased from 2.5 billion in AD 1950 to 7.1 billion in 2012 (USCB, 2013). It is predicted that the world population will again double itself by the end of the 21st century and will touch the 12 billion mark. Most of this increase in population has been, and will be, in the developing countries in Asia, Africa and South America. India occupies 2.4 percent of the total land area of the world, but supports 16.7 per cent of the world population. Like many other developing countries in the world, population in India is increased from 345 million in 1947 to 1210 million as per the 2011 census with a growth rate of 1.76 during last decade. Therefore, pressure on land has been mounting up at an alarming rate. Population growth coupled with live stock population expansion, urbanization and industrialization are major contributory factors to it. The unscientific and unplanned exploitation of this limited resource takes its toll in terms of degrading the land. A large proportion of the land area shows clear evidence of advanced and continuing degradation seriously affecting the country’s productive resource base (Abrol and Sehgal, 1994). Jammu & Kashmir and  Nagaland  have maximum share of their land (94%) under degradation. This is primarily due to large areas under mountains, cold deserts and other such degraded lands. In the agriculturally prominent states like Uttar Pradesh (63%), Madhya Pradesh (50%) and Karnataka (46%) (Shalander Kumar, 2011) the extent of land degradation is of great concern and posing a big threat to the natural resources, resulting in almost 5 billion tonnes soil and 6 million tones of nutrient loss every year (Singh, 2009).

Introduction

With the advent of agricultural intensification, soil quality has been the important concern for the scientists, environmentalists and the planners at the global level. Research efforts have been made at the experimental fields, research laboratories and few specific locations, in order to establish the yardsticks, standards and critical values of soil parameters to ascertain the quality of the soil. The primary aim is the management of soil resources as per the need and their rejuvenation through best practices in hand. The idea, as it was aimed at, has now percolated down to the minds of end users-the farmers. The state and Central governments have been sensitized and are attaching great priority to the soil health. In states like Tamil Nadu, Gujarat, Goa, Uttar Pradesh crores of farmers are given “Soil Health Cards”. Central Govt. has the plan to issue these cards to all farmers in the country, detailing the deficiencies in soil and the amount of fertilizer needed.

Introduction

The organic matter added to soil externally as FYM, crop residues, leaf fall, root deposition etc. has been a part and parcel of Indian agriculture. The total carbon added to soil is subject to microbial decay and slowly the major portion of it finds way back to the atmosphere. There is every possibility that atmospheric CO₂ concentration will increase in near future; that will further lead to increased attention of scientific community to make soil a possible sink for atmospheric CO2. when the carbon sequestration is thought with the perspective of reducing carbon dioxide emission for healthy atmosphere at one hand and improving soil health on the other, there is utmost need to opt for technologies that can fulfill both these objectives. There is growing interest in the use of charcoal or ‘biochar’ to sequester carbon in soil and improve soil fertility (Lehmann and Joseph, 2009). There are many types of soil additives and fertilizers used to improve the structure and functions of soil. Biochar has re-emerged as an issue in the last ten years as everyone is looking for sustainable ways to improve soils and decrease use of chemical fertilizers. 

Increasing consciousness about environmental and coupled health hazards with agrochemical usage in farming and resultant consumers’ preference to safe and chemical-free food are the major factors that lead to the interest in eco-friendly forms of farming in the world. Organic agriculture is one such broad spectrum of production methods in consonance with conservation agriculture that are supportive of the environment and is now practiced in not less than 130 countries to the tune of 30.4 mha in 0.7 million organic farms. In India, about 1.02 mha area is reported to be under organic farming (certified area and area under conversion) with nearly 0.5 lakh certified organic farms. It is believed that adoption of ecologically sustainable farming practices can provide twin benefits of reversing the declining trends in crop productivity and protecting the environment. The demand for organic food is showing an increasing trend with an average growth rate of 20-25% per annum.

Introduction

Soil biology is the study of the complex system of interrelationships existing among living organisms and their abiotic (physical and chemical) and biotic (living) environments and themselves. The abiotic factors in the environment determine the ability of organisms to live and reproduce. The chemical and physical sampling and analyses provide a broad picture of the parameters that define the aquatic environment. Biological investigation of soil can determine the extent of soil function and activity. To address environmental issues and increase land’s productive potential, we must now go beyond erosion control, soil fertility enhancement and management for soil quality.

Introduction

Soil organic matter is an important component of soil quality and productivity; however, its measurement alone does not adequately reflect changes in soil quality and nutrient status. Instead, measurements of biologically active fractions of organic matter, such as microbial biomass carbon and nitrogen, and potential C and N mineralization, could better reflect changes in soil quality and productivity that alter nutrient dynamics. Therefore, measuring microbial biomass is a valuable tool for understanding and predicting long-term effects on changes in land use and associated soil conditions.

Introduction

Soil organisms contribute to the maintenance of soil quality in that they control the decomposition of plant and animal materials, biogeochemical cycling of elements, including nitrogen fixation; the formation of soil structure and the fate of organics and inorganics applied to soils. Soils and their biodiversity thus play a critical role in maintaining soil health. Non-return or diminished return of organic matter and residues deprive the soil biota of their food with loss of soil health and fertility. A large, diverse, and active population of soil organisms is the most important indicator of a healthy soil. The effects of physical and chemical degradation of soils are obvious. But the effects of biological degradation which is caused due to loss of specific soil organic matter (SOM) fractions (and consequently the loss of microbial species/communities dependent on them for nutrition) as well as and specific toxicity influences on soil flora and fauna are insidious. Proper management of soil biodiversity will help in sustainable agriculture and reduce the cost of external inputs especially for nutrient supply and crop protection.

Conservation agriculture (CA) has benefits to farmers in overcoming labor shortages associated with other tillage practices. With the introduction mechanized CA practices, farmers are able to finalize planting earlier, and can even free the equipment for service hire to neighbors. These CA equipment can reduce the delays in planting and also benefit neighbors who can hire this equipment and be able to plant within the first planting window, commonly associated with better yield gains. Smallholder farmers can also form groups to mobilize resources for equipment purchase to overcome the equipment cost problem. Local production of CA equipment for the smallholder agricultural sector has been almost non-existent prior to 2005.

Introduction

Development, refinement and adoption of machinery for a range of soil and cropping situations will be fundamental in any success to promote conservation agriculture systems. This chapter reports on the performance of machinery for minimum/zero tillage, bed cultivation system and crop residues management in different cropping system and outlines the need for continuing efforts. Particularly, the focus will be on developing equipments/implements for fixed path / controlled traffic to minimize the ill effects of wheels in the longer terms.

Introduction

Climate change has undoubtedly resulted in greater public and scientific involvement. Climate change refers to any change in climate over time, whether due to natural variability or as a result of human activity (IPCC, 2007). The United Nations Framework Convention on Climate Change (UNFCC) defined it as a change of climate that is attributed directly or indirectly to human activity which alters the composition of the global atmosphere and that is in addition to natural climate variability observed over comparable time periods. World Meteorology Organisation defines climate change as statistically significant variation in either the mean state of the climate or in its variability, persisting for an extended period (typically decades or longer). 

Introduction

Soil is considered one of the world’s limited, non-renewable resources. Under cropland conditions, it takes between 200 and 1000 years for 2.5cm of topsoil to form (Piementel et al., 1995). The continued maintenance of fertile soil is essential in order to meet basic human needs. It strengthens the provision of ecosystem services such as food production and climate regulation, and provides the basis of livelihoods for millions of people across the world (Ma, 2005). The multi-functionality of soils is key to the sustainable use of land and soils. A healthy soil performs six essential functions (Andrews et al., 2004) namely: i) Physical Stability and Support, ii) Water Relations, iii) Resistance and resilience- iv) Nutrient Cycling, v) Biodiversity and Habitat and vi) Filtering and Buffering. These soil functions are controlled by various soil properties. Among them soil structure is one of the most important properties of soil, which describes soil condition and has a great influence on crop production.

Introduction  

Developing effective strategies for improving and stabilizing rainfed crop production continues to be a prime concern in the semi-arid region of western India. Rain water management is most crucial aspect in rainfed production systems. Growing uncertainties associated with rainfall pattern (Ali et al., 2007) add to the complexity of the challenge. The medium deep black soil region of Rajasthan is spread predominantly in Jhalawar, Kota, Baran, Bundi, and Sawai Madhopur districts of South-eastern Rajasthan (Fig. 1). This region is characterized by almost flat alluvial plains interspersed with hills of Arawali and Vindhyan ranges and rock outcrops. 

Introduction

Inappropriate land use and cultivation practices are one of the main reasons for the poverty and food insecurity faced by smallholders in most parts of the rural regions in India and other developing countries. Unsustainable agricultural practices lead to an exhaustion of soil resources, which results in reduced land productivity, aggravated land degradation, and a reduction in biodiversity. Conservation agriculture (CA),  has shown to improve, conserve and use natural resources in a more efficient way through integrated management of available soil, water and biological resources. It is now widely recognized as a viable concept for sustainable agriculture due to its comprehensive benefits in economic, environmental and social terms. Its ability to increase grain yields to provide better economic performance and reduce production risks and to improve energy use efficiency has been well-documented. 

Introduction

Carbon is an essential building block of life. It has always been transported from one form or ecosystem to another as a basic part of natural processes. Examples include its transport, through soil erosion, into aquatic ecosystems, or the undersea formation of limestone, the chief component of which is carbon. Much of the world’s carbon is held in soils, including agricultural soils. Another significant carbon pool is in the atmosphere, as carbon dioxide. Ever since agriculture began, between 7,000 and 10,000 years ago, the balance between these two pools has been changing. The loss of soil carbon through soil disturbance has augmented the atmospheric carbon pool. Since about 1750, the burning of fossil fuels has accelerated the process. Carbon dioxide is the largest single agent of climate change.

Climate change is a major issue facing society today with extensive studies being undertaken to find ways to mitigate its effects and impacts in the future. A key factor contributing to climate change is excessive levels of greenhouse gases in the atmosphere and global efforts are focussed on both reducing the emissions of greenhouse gases and increasing the storage (sequestration) of atmospheric carbon.

Introduction

Global agriculture is under tremendous pressure to meet the demands of rising populations using finite, often degraded, natural resources. Globally, these resources are predicted to be further stressed/degraded by the impact of climate change. The ongoing buildup of greenhouse gases (GHGs) in the atmosphere is prompting shifts in climate across the globe that will affect agro-ecological and growing conditions. In addition, agriculture and land use change are prominent contributing sources of global GHG emissions. Further, the application of fertilizers, rearing of livestock, and land clearing influences levels of GHGs in the atmosphere and in turn affects the soil carbon storage as well as sequestration processes. The 2010 World Development Report draws (WDR, 2010) on analysis of the Intergovernmental Panel on Climate Change (IPCC, 2007) to calculate that agriculture directly accounts for 13 percent of global GHG emissions in CO2 equivalents and indirectly accounts for an additional 18 percent of emissions, when land use and conversion for crops and pasture are included in the calculations. Therefore, whilst ongoing climatic changes are affecting agricultural production, the sector itself also provides opportunities for emissions reductions.

Introduction

Carbon on earth is stored primarily in rocks and sediments. Only a tiny fraction resides in mobile reservoirs – the atmosphere, oceans, soil and terrestrial biosphere – to play a vital role in biological, physical and chemical processes at the earth’s surface. The small fraction of C present in the atmosphere as CO₂ is especially important, as its abundance is a major regulator of the climate of the planet. The rapid increase in atmospheric concentrations of CO₂ over the past 150 years, reaching current concentrations of about 380 ppm, corresponds with combustion of fossil fuels since the beginning of the industrial age. Conversion of forest lands to agricultural use also redistributed C from plants and soils to the atmosphere and altered ecological balance through physiological effects on vegetation. The understanding of C sources and sinks has advanced enormously in the last decade. However, we cannot yet quantitatively define the global effects of human activities such as agriculture and forestry on climate change. An understanding on the long-term changes in atmospheric concentration will help enhance understanding on how the earth’s climate will evolve in future.

Introduction

Increasing carbon content in the soil, through better management practices, produce a number of benefits in terms of soil biodiversity, soil fertility and soil water storage capacity and hence productivity. Soil carbon sequestration through the restoration of soil organic matter can further reverse land degradation and restore soil “health” through restoring soil biota and the array of associated ecological processes. In particular, through improved soil water storage and nutrient cycling, land use practices that sequester carbon will also contribute to stabilizing or enhancing food production and optimizing the use of synthetic fertilizer inputs, thereby reducing emissions of nitrous oxides from agricultural land. Conservation tillage practices also reduce significantly the use of fuel and hence gaseous emissions. Soil carbon sequestration is thus very cost effective and could take effect very quickly (FAO, 2008). It also constitutes a valuable win-win approach combining mitigation (CO₂ is removed from the atmosphere) and adaptation, through both increased agro-ecosystem resilience to climate variability and more reliable and better yields (production and income generation). Under climate change scenarios, increased temperature may enhance soil organic matter mineralization in colder regions of the world, releasing carbon dioxide from soils (FAO, 2008). Improved soil management will mitigate the effects of global warming by improved and permanent soil cover. Soil carbon storage was hitherto left out of international negotiations because of envisaged difficulties of validation of amounts and duration/permanency of sequestration. 

Carbon sequestration implies removing atmosphere carbon and storing it in natural reservoirs for extended periods (Lal, 2011). Soil carbon sequestration is the process of transferring carbon dioxide from the atmosphere into the soil through crop residues and other organic solids, and in a form that is not immediately remitted. This transfer or “sequestering” of carbon helps off-set emissions from fossil fuel combustion and other carbon-emitting activities while enhancing soil quality and long-term agronomic productivity. Soil carbon has gained increased interest in the recent past owing to its importance in carbon sequestration studies and its potential impact on sustainable crop production. However, accuracy in estimating soil carbon sequestration to determine best management practices is hindered by inherent variability of soil properties (Srinivasarao et al., 2008 and 2009b). Maintaining or arresting the decline in soil organic matter (SOM) is the most potent weapon in fighting against soil degradation and for ensuring sustainability of agriculture in tropical regions. In India, 65 per cent of agriculture is rainfed, covering the categories of arid, semi-arid and sub-humid climatic zones. Consequences of depletion of organic matter are poor soil physical health, loss of favorable biology and occurrence of multiple nutrient deficiencies. It was stated that in rainfed arid, semi-arid and sub-humid tracts, next to poor rain water management, depletion of nutrients caused by organic matter deficiency is an important cause of soil degradation. Improving organic matter is, therefore, crucial to sustenance of soil quality and future agricultural productivity. Humus is known to favor many useful physical, chemical and biological processes that occur within the soil (Srinivasarao et al., 2011c). Accordingly, 

Conservation Agriculture (CA) is an agro-ecological approach for sustainable crop production and intensification. CA comprises the resource conserving agricultural production practices that aim to achieve more produce at less cost while enhancing the quality of the natural resource base. CA is all about providing multiple options for farmers, endowed differentially. The basic components of CA include drastic reduction in tillage, adequate retention of crop residues on the soil surface, use of economically feasible diversified crop rotations, avoidance of freewheeling and practice of controlled traffic, if possible. These elements of CA are not site-specific but represent unvarying objectives that are practised to extend CA technologies efficiently across all production conditions. No-till agriculture is considered as a revolutionary step in the direction of preventing land degradation and rehabilitation of the resilient but fragile lands. No-till agriculture together with other associated management practices such as direct seeding into loose crop residues to provide soil cover and to conserve soil moisture, judicious choice of crop rotations and agro-forestry tree species constitutes CA. CA is thus being widely accepted as an important component of the overall strategy for enhancing productivity, improving environmental quality and preserving natural resources for food security and poverty alleviation in such areas.  Recent CA trials conducted in Karnataka, Andhra Pradesh and Tamil Nadu seem to bring out that the rainfed tropical India stands to benefit more from CA than the irrigated areas.

Introduction

India, with only 2.5% of the world’s geographical area, is home to 17% of the global population. Population has increased from 361 million in 1951 to 1140 million in 2011, more than threefold increase over 50 years and expected to reach 1.5 billion by 2050. The food consumption levels of India will increase from the current level of 2400 k cal/ per capita/ day to about 3000 k cal/ per capita/ day in 2050 (Singh, 2009). The production deficits are expected for cereals and pulses not only to meet the growing food requirements but also to meet the growing demand for animal based products which require higher quantities of food grains. It is estimated that despite realizing the full irrigation potential in the country, nearly 40% of the net sown area will remain rainfed. Rainfed areas with nearly 60 per cent of the cultivated area contributes for 40 per cent of country’s food production in the country, home to about 40% of the human and 60% of the livestock population,

Introduction

It is estimated that about 16 per cent of total geographical area of India (329 m ha) has moisture index value below - 66.6% and is thus classified arid. This area is further classified into hot arid (36.8 m ha) and cold arid (15.2 m ha) regions (Ramakrishna et al., 2000). The hot arid region is characterized by extreme temperatures, low (<500 mm) and erratic rainfall, very high wind velocities, low humidity, high PET (>1800 mm) and frequent severe droughts which occur once in three years to alternate years in general. The soil moisture and soil temperature regimes are aridic and hyperthermic, respectively. The hot arid region exists in Rajasthan, Gujarat, Andhra Pradesh, Punjab, Haryana, Maharashtra, and Karnataka (Fig 1).

Introduction

Cotton is a major commercial crop grown on nearly 12 m. ha area. About 65% of the area is rain dependent. It is grown on a wide range of soil types and climatic conditions. Soils supporting cotton in the rainfed areas are Vertisols (Vertic intergrades), Inceptisols and Alfisols. Rainfall ranges from 500-1200 mm in these regions. Both Alfisols and Vertisols have different potentials and problems but both need organic C improvement and soil moisture conservation measures to restore their productivity. This can only be achieved through resource conservation strategies. Conservation agriculture (CA) is one such strategy that focuses on resource conservation. It refers to a system of raising crops without disturbing the soil while retaining crop residues or soil surface. 

Introduction

Rice is grown 43.7 m ha land in India. It is cultivated in 39.51 m ha under kharif and 4.26 m ha under rabi season. As a whole, rice production in India was 104.32 m t (2011-12) with an average productivity of around 2.6 t ha-1. Majority of rice grown in India in the eastern part of the country comprises the states of West Bengal, Orissa, Chattisgarh, Assam, Bihar and Jharkhand. Maximum area under rice in eastern India in West Bengal (5.94 m ha) with a production of 15.04 mt. Productivity was maximum in West Bengal followed by Jharkhand, Assam, Bihar, Orissa and Chattisgarh (DOSE, MOA, GOA, 2011). There is a plenty of scope to increase the productivity of these region with proper policies and technological interventions. Rice area in eastern region (23.4 m ha) would be divided in different ecologies, namely, irrigated (23.2%), rainfed upland (17.9%), rainfed lowland (43.1%) and flood prone areas (25.1%).

Introduction

The demand of cereals to meet the food requirements of the burgeoning population is increasing while on the other hand most vital inputs of agriculture viz. productive arable land, water and labour are depleting day by day. Rice is the major Kharif crop of India and it is estimated that rice is being grown in 43.97 million ha with 104.32 million tonnes of production during 2011-12 (Agricultural Statistics at a glance, 2012). In the eastern region of India, rice is produced by the conventional system of cultivation which involves puddling and transplanting which is basically water, labour and energy intensive thereby adversely affecting the environment. Therefore, to sustain the long term production of rice, more efficient alternative methods of rice productions are needed. For this, conservation agricultural practices which comprises of technologies which are water, labour and energy efficient along with eco-friendly characteristics will be a better alternative to conventional practices (Kumar and Ladha, 2011). 

Introduction

The Indo-Gangetic plain (IGP) is of great importance for the food security of India. It extends over 1,600 km with a width of 320 km, including the arid and semi arid environments in Rajasthan and Punjab and the humid and per humid deltaic plains in west Bengal (Shankaranarayana, 1982). During the green revolution period in the early 1960s, production increased through area expansion and intensification of the rice –wheat system. Driving forces included suitable thermal regimes for rice and wheat cultivation, development of short- duration, nitrogen responsive cultivars, expansion of irrigation and an ever increasing demand for food from the rising population. The rice –wheat system, covering an area of around 10 million hectares (mha), is the major cropping system in the IGP. These two crops together contribute more than 70 % of total cereals production in India from an area of around 25 mha under wheat and about 40 mha under rice. The small states of Punjab and Haryana contribute 20 % of the total national grain production and 50 % and 85 % of the government procurement of rice and wheat, respectively (Singh, 2000).