eChapters

Introduction

From a scientific perspective, weeds are plants that grow in locations and times when we desire to cultivate other plants or no plants at all. Weeds are uninvited, rapidly spreading, competitive and environmentally detrimental vegetation that can be found in both cultivable and non-cultivable lands. Globally, approximately 30,000 plant species have been classified as weeds, out of which 18,000 pose significant threats to crop productivity, leading to substantial losses. Among the different factors causing crop productivity losses, weeds are a major biotic constraint and account for 33%.

Introduction

Farming has undergone significant changes since the Green Revolution in the late 1960s and economic liberalisation in the early 1990s. These changes have led to a shift in focus towards a few specific enterprises due to factors such as a decrease in farm size, fluctuating commodity prices, the need for livelihood diversification, and a shortage of labor. (Ponnusamy and Kousalya, 2017). The current scenario in the country indicates that the agricultural area under cultivation is decreasing and more than 20 percent of the current cultivable land will be converted into non-agricultural purposes by 2030 (Gill et al., 2005). 80 per cent of farm families belong to the small and marginal farmer categories. Hence India is putting more emphasis on agriculture in research as well as in technology transfer through many extension activities.

Introduction

Future agricultural production potential is in danger due to the existing cropping system, characterized by irresponsible chemical utilization, extensive tillage, monoculture, and soil health degradation. Consequently, a significant challenge for modern agriculture lies in ensuring adequate nourishment for the entire world’s population while also safeguarding the environment. The intensification of agricultural practices negatively impacts vital natural resources like soil, water, air, and biodiversity throughout various developmental stages. While the conventional cropping system have enhanced crop productivity, its consequences including land degradation, resource depletion, reduced organic matter insoil, draught, soil salinity, erosion, and climate change pose significant global threats (Tomar et al. 2014; Yadav et al. 2014; Mandal et al. 2020; Rani et al. 2021).

Introduction

`The living and nonliving components of ecosystems, as well as the conditions and processes that occur within them, create services thus connecting ecosystems and human cultures. The preservation of Earth’s biological diversity and the protection of the benefits, or “ecosystem services,” those functioning ecosystems bring to humanity are two primary goals of environmental conservation. Agroforestry is increasingly viewed as providing ecological services, environmental advantages, and economic gains as part of a multifunctional working landscape. The multifunctional importance of agroecosystems was emphasized in both the Millennium Ecosystem Assessment (MES 2005) and the International Assessment of Agricultural Science and Technology for Development (2008).

Introduction

In the ancient era, adulteration was practiced as economical fraud like the addition of water to milk and stone to grains and pulses but nowadays it has become a global concern due to adverse health effects of adulterants on a human being. Words like substitution and admixture can help define adulteration. In general, adulteration is defined as either removal of valuable constituents from food or intentionally/ unintentionally addition of substandard quality material to degrade food quality. Food adulteration not only negatively affects the quality of food products but also results in numerous adverse health effects along with significant economic problems (Cheng et al., 2015).

Introduction

The act of substituting food or drink with low grade quality ingredients thereby the f inal product will fail to the meet the regulation or standards and in most cases even unfit for human consumption (Augustin et al., 2009). With demand for profit based manufacturing market, there will be increase in points of adulteration with cheaper alternatives or inferior grade ingredients in the production of food or drink (Banti, 2020)]. Adulteration is highly prevails in developing countries such as India, where about 70% of milk supply is adulterated on day to day basis (Bittar et al., 2017). It is every nation and each individual’s responsibility to provide safe and nutritious food to the consumers.

Introduction

Spices are botanical products of tropical and subtropical plants, mainly fruits, seeds, f lowers, roots, stems, leaves, bark, or whole plant (Golob & Nations, 1999). The dominant spices of trade including cardamom, cinnamon, cloves, ginger and pepper (A. Osman et al., 2019)including aroma, flavor, and color, to foods and beverages in an effort to enhance their palatability. Herbs and spices exhibit a plethora of medicinal properties including antimicrobial and antioxidant properties. Spices serve as natural preservatives to delay food spoilage and extend shelf life.

Introduction

Food fraud is not new it can be traced back to ancient Rome and Athens, where regulations prohibiting the adulteration of beverages with flavours and colours were in place. It exists since the food trade has been started. Food fraud affects all food supply chains, thus the entire food sector. Due to globalisation and the increasing complexity of supply lines, food supply chains are becoming more vulnerable to food fraud (Robson et al., 2021a). A fraud is “any act or omission relating to the use or presentation of false, incorrect, or incomplete statements or documents, or non disclosure of information in violation of a specific obligation, and any other illegal activity affecting the financial interests” (EU No. 2017/1371).

Introduction

The term ‘multipurpose trees’ covers all woody perennials used in agroforestry. Many authors have given many definitions of MPTs and MPTS. Burley and von Carlowitz (1984) reviewed many definitions and gave a synthesised definition which states that “multipurpose trees and shrubs (MPTS) are those which are deliberately grown and kept and managed for preferably more than one intended use, usually economically and/or ecologically motivated major products and / or services in any multipurpose land use systems, especially agroforestry systems”. The Forestry /Fuelwood Research Development Project (1992) precisely defined ‘multipurpose trees’ (MPTs) to mean tree species that are grown to provide more than one significant crop or function on the farm.

Combination Fungicides

Composite or combination fungicides are made up of two or more active ingredients. The active ingredients of combination fungicides often come from two distinct chemical groups. Combination fungicide products offer an optimized combination of two or more active ingredients and the convenience of one product. Combination fungicides boost each treatment’s efficacy and extend its range of action. Combination products significantly lower pathogen populations by targeting numerous pathogens with a single treatment. Longer periods of control are achieved by further reducing pathogen populations with increased potency. Combinations of fungicides can decrease the selection of pathogen strains resistant to specific fungicides and restrict exposure to each active component.

Introduction

The food processing industry ranks fifth in size in the country and employs 16 lakh workers which is 19% of the country’s industrial labour. It accounts for 14% of the total industrial output with 18% of industrial GDP and 6.3% of countries GDP. So, food processing plays a vital role in India’s prosperity. The Food Processing Industry sector in India is one of the largest sector in terms of production, consumption, export and growth prospects. Food processing industry broadly comprises primary processing category and the other categories embracing the secondary, tertiary and further stages of downstream processing. Primary food processing is a major industry with lakhs of rice-mills/ hullers, flour mills, pulse mills and oil-seed mills. There are several thousands of bakeries, traditional food units and fruit/vegetable/spice processing units in the unorganized sector. In the organized sector, there are over 820 flour mills, 418 fish processing units, 6600 fruit/vegetable processing units and 171 meat processing units. Indian processing industries has installed capacity of 21 lakh tones; however these industries actually processed 9.8 lakh tones of the produce. So the total capacity utilization of industries is <30%. There are 70% units in home/cottage/ small scale sector and 30% units in large scale sector with capacity of 250 tonnes per annum and 30 tonnes/hr, respectively. Large scale contributes 70% of the production. The principal crops and commodities which constitute the primary base for the food processing industry and considered important sub-sectors in food processing industries are illustrated in Fig. 1.

Introduction

The health and wellness of human being is largely dictated by the consumption of nutritious foods. Understanding the role of foods in maintaining health and cure of diseases has its roots in the ancient Hippocratic and Vedic texts as well as in the canons of Traditional Chinese Medicine (Sharma et al., 2012). Presently, the transition from a traditional to modern lifestyle, consumption of diets rich in fat and calories combined with a high level of mental stress has been the major cause of lifestyle related diseases like coronary heart disease, obesity, diabetes, cancer and hypertension (Moczara et al., 2012; Sharma et al., 2018). Various studies have linked foods as helpful in combating a number of such degenerative diseases (Sharma, 2015).Therefore, the tenet "Let food be thy medicine and medicine be thy food", quoted by Hippocrates about 2,500 years ago is receiving overwhelming interest. There are number of scientific reports emphasizing the importance of consuming biologically active ingredients present in fruits, vegetables, whole grains and legumes to reduce the risk of chronic diseases (Hasler 2002; Das et al., 2011; Sharma and Sharma 2016). Such biologically active ingredients are now popularly known as neutraceuticals. Whereas, the functional foods are the foods that resemble traditional foods but possess demonstrated physiological benefits. In some countries, however, functional foods and nutraceuticals are used interchangeably. Regardless, the main focus of such products is to improve health and reduce disease risk through prevention. The main difference of this category with pharmaceuticals is that they are multi-targeted mixtures and present at low concentration while pharmaceuticals are uni-targeted pure compounds with high dose use. Hence, an overview on the concept of nutraceutical and functional foods, their classification, development and regulations is summarized in this article.

5.1 Introduction

Chilli is a tropical vegetable crop but considered as an important spice crop of India. Chilli is mainly used in culinary purpose for adding flavour, colour and pungency. It is consumed both in mature and immature stage. In immature form it is valued for pungency and in ripe dried form it is valued both for pungency and colour. Dry chilli powdered or ground into a paste and even green chillies are used for curries, sambars, rasam and other savory dishes to impart pungency, colour and flavour to food items. It is widely used in the manufacture of curry powder, curry paste and all kinds of pickles and preparing sauce, soups, salads etc. In food and beverage industries chilli is being used in the form of oleoresin which permits better distribution of colour, flavour in food. Capsaicin, the pungent principle, is present in cores or septa walls and placenta. It is used in the preparation of balms, whereas the colour extracts (Capsanthin/carotenoid pigments) find use as colour additives in food industry, poultry and prawn feed industry. Green chillies are rich in Rutin which has pharmaceutical use and known as Vitamin P. Oleoresin present in chilli permits better distribution of colour and flavour in food as compared to chilli powder due to cleanliness and uniform flavour. Oleoresin is used in preparation of processed products and also in a number of pharmaceutical formulations. A non-conventional use of chilli is for self-defence sprays of capsicum oleoresin at ultra-high emission rate which temporarily immobilizes the attacker. Highest pungent chilli of the world is Bhoot Jolokia/Naga King chilli (Capsicum chinensis) in NE India. Hotness of Naga king Chilli is 10,01,304 SHU (Scovonelle Heat Unit). At present chillies are grown in almost all states of the country. The major chilli growing states are Andhra Pradesh, Karnataka, Maharashtra, Odisha, Tamil Nadu, Madhya Pradesh, West Bengal and Rajasthan. Within a span of over four centuries, it has spread to an area of around 0.8 million ha. The area and production keeps varying depending on price fluctuations and the weather conditions. Area under chilli cultivation in India is 0.831 million ha with a production 1.87 million tonnes of dry chilli. Andhra Pradesh has been leading both in area and production contributing on average of 25 per cent of the total area and over 40 to 50 per cent of the total production. Chillies have adapted very well to the Indian condition so that, India is considered as secondary centre of origin.

1. Rearing of fowls for eggs and flesh is known as  ….

 a) Poultry keeping b) Husbandry   

 c) Sericulture d) Apiculture

 2. The types of poultry birds are  ….

 a) Broilers b) Layers  

 c) General purpose birds d)  All of these

 3. The layers are reared mainly for  ….

 a) Flesh b) Eggs  

 c) For both d) None of these

 4. Which of the following are layers?

 a) Anconas  b) Australorp   

 c) White leghorn d) All of these

 5. Broilers are reared for  ….

 a) Flesh b) Fish  

 c) Ornamental purpose d) All of these

This chapter begins with an introductory overview, providing a basic understanding of correlation and its types. It guides readers through in-depth analysis using R, demonstrating how to apply these concepts practically.

Correlation

Correlation analysis is a statistical method used to evaluate the strength and direction of the relationship between two variables. This analysis is vital in identifying and understanding how variables are interconnected within a dataset, providing insights into their mutual influences.

Key aspects of correlation include

• Range of the correlation coefficientThe value of the correlation coefficient (“r”) falls within the range of −1 to +1.

• Independence from origin and scaleThe correlation coefficient (“r”) remains consistent regardless of any changes in the origin or scale of the variables.

• Unit independenceThe correlation coefficient is independent of the units of measurement

of the variables.

• Relationship with independenceWhile uncorrelated variables are generally independent, the reverse is not necessarily true; independent variables will always be uncorrelated.

The horticulture sector of our country is following an increased growth in area and production by 9% and 14 % respectively for the past six years (2015-21). It is reported that the growth rate of horticultural crop production accounts for 2.7% per year. Fruits and vegetables are the major sectors contributing to total horticulture production. As per the report of second advance estimates published by Horticulture statistics division, Ministry of Agriculture and Farmers Welfare during 2020-21, our country recorded the highest horticulture production during 2020-21 with an annual production of 329. 86 million tonnes from an area of 27.23 million hectares and the vegetable sector shared around 196.26 million tonnes production from 10.80 million hectare area. India is the largest producer of okra and ginger and second largest producer of potato, onion, cauliflower, brinjal, cabbage etc. Vegetables also contribute to the export market and onion, mixed vegetables, potatoes, tomato and green chilli are the main vegetables exporting from our country. It is estimated an export of worth Rs. 4969.73 crores from vegetables during the year 2020-21.

Importance of Vegetable Seed Production

Though we are leading in many of the vegetables in area and production, our national average in productivity of the major vegetables is far less compared to the world average. The country s estimated vegetable production by the year 2050 is 375 million tonnes from 15 million hectare with an average productivity of 25 t/ha. Low productivity is mainly because the farmers are still relying on old varieties which are less yielding and susceptible to pest and disease. Unavailability of the quality seeds of newly released varieties is one of the main reasons for this production gap. A substantial increase in yield and quality of vegetable crops can be achieved by adopting suitable agronomic practices, plant protection measures and use of quality seed. Now a days, there is an increased demand for good quality seeds of open pollinated varieties as well as hybrid seeds through which an increased vegetable production can be achieved for meeting the requirement of increasing population. So far, very limited number of vegetable hybrids have been developed and released by public sectors and majority of the existing promising hybrids in vegetables are from private sectors.

The Review of literature is a systematic, explicit and reproducible method of identifying, evaluating and synthesizing the existing body of a completed and a recorded work produced by researchers, scholars and practitioners. The Review of literature is also a resource paper which includes the current knowledge including substantive findings as well as the theoretical and the methodological contributions to a particular topic. These are available mostly in academic and scholastic journals.

Review of literature provide the basics for research in nearly every academic f ield. This chapter is an extensive survey of all past studies relevant to the field of investigation which gives knowledge of what others have found out in the related field of study. In any scientific investigation or research, a comprehensive presentation of the review of literature is a statutory requirement.

The aim of review of literature is to highlight what has been done so far in the field of interest and how our findings are related to earlier research.

Its main functions are to develop a better understanding of the problem to be investigated, delineate a new area of study and avoid unnecessary duplication, decide on the tools and techniques to be adopted including developing some new ones and also to relate the present study with the previous ones by finding out the areas of agreement and disagreement.

The review of literature may

(a) Indicate the following by providing referential inputs – Approaches, Methods, Variables used, Statistical procedure, Expected results.

(b) Provide theoretical background to the study.

(c) Help to justify how the findings are related to the body of knowledge in the f ield of research.

(d) Establish a link between what we have proposed to study and what has already been found. It helps us to refine the research methodology.

A variety of glassware like burettes, pipettes, measuring cylinders, flasks, separating funnel etc. are used for experimental purposes in a laboratory. All of these need to be used and handled correctly, otherwise the chances of experimental error and damage to the glassware increase significantly. Being made of glass, they need special care while washing and using in experiments because even a minor mistake in handling of glassware may result in breakage of the apparatus. With this precautionary note, let us discuss about some of the specific glassware used in the laboratories.

Burette

Burette is a long graduated glass tube with a stopcock at one end for delivering a known/desired volume of a liquid, especially in titration experiments. It contains a stopcock at the lower end and a tapered capillary tube as the stopcock’s outlet. The flow rate of liquid from the tub stopcock’s outlet can be controlled with the help of stopcock valve. Burette is used for measuring the volume of a solution/chemical added in a quantitative (titrimetric) estimation experiment.

Procedure of using a Burette

The burette reading must be noted before and after delivering the chemical/ solution from the burette. The difference in these two readings is the volume of the chemical/solution released out of the burette. The solution should be released slowly/drop-by-drop to avoid any experimental error/mistake. If the solution/chemical is allowed to pour out too fast, the wall of the burette will not drain properly and some liquid may remain sticking to the surface of the walls. Moreover, excessive amount of chemical may be released/dropped during the experiment, particularly during the titration experiment wherein we need to know the exact amount of acid/base needed to get neutralization point. Thus, any minor mistake may lead to get a faulty reading. The measuring capacity of a burette usually used in a laboratory is 50 mL.

Introduction

The soil is an invaluable resource that sustains life in innumerable ways. It provides a dynamic foundation for agriculture, supporting growing crops, and serving as a habitat for organisms. It plays a crucial role in maintaining biodiversity. Additionally, soil acts as a filter, purifying and storing water, and it reserves essential plant nutrients. however, soil resources face various threats that endanger their health and productivity. Soil erosion, the removal of the top layer of soil through natural or human-induced processes, poses a significant challenge. It not only leads to a loss of fertile soil but also causes widespread environmental degradation, and reduced agricultural productivity in response to this difficulty, soil conservation emerges as a principal priority. Soil conservation incorporates a range of practices and strategies to prevent soil erosion, and promote sustainable land use. By adopting and implementing effective soil conservation measures, we can safeguard this irreplaceable resource for future peers and ensure food security and environmental sustainability.

The main highlight of the study is to shed light on the causes and consequences of soil erosion, exploring different conservation practices and techniques; also to understand the vital processes and factors contributing to soil erosion, including wind and water erosion. Additionally, to study its impact on soil and crop production and strategies for different conservation practices to mitigate erosion, preserve soil fertility, and ensure the long-term sustainability of our agricultural systems and ecosystems.

Introduction

Decentralization means the action or fact of reducing or undoing “centralization” or “concentration.” The dictionary meaning of decentralization is “The process of transferring the functions from the Central Government to the local units.” Decentralization is devolving power of decision–making with the lower level of organization. In a decentralization, delegation and devolution of power are given to the lower level. Devolution implies a situation in which lower ranking units acquire greater autonomy in respect of certain defined functions, including decision-making authority. Devolution of functions, powers, and responsibilities are normally granted through legislation.

Decentralized Planning in India

With the introduction of the Community Development Programme (CDP) and National Extension Service (NES) in 1952, increasing agricultural production had been on India’s agenda in different plan periods. The success of CDP and NES was reviewed by the Balawant Rai Committee in 1957 and the committee realized that community development can be achieved only when the community understands its problems, owns its responsibilities, exercises the necessary powers through its elected representatives, and maintains a constant and intelligent vigilance on local administration. The recommendation of the committee led to the preparation of plans at the level of state, district, block, towns, and Panchayats in the second plan period from 1957 to 1962. The Fourth Evaluation Report (Programme Evaluation Organization, Planning Commission) in 1959 recommended that organized and institutional participation by the public in development programs is bound to give better, more consistent, and more lasting results. In 1977, Ashok Meheta Committee suggested changing the concept of Panchayati Raj to a political institution. In 1981, the eminent economist Prof. M.L. Dantewala observed that the merit of decentralized planning is derived from its ability to discover dormant resources and skills and its endeavor to activate them. However, there was slow progress in decentralized planning up to the eighth plan (1992-97).

It is the scholastic and theoretical exercise that configures the operational definition and text of entire research work. The conceptual inputs, axiomatic inputs, logic of discourses and the pursuit knowledge come together to frame the theory in compliance and in congruence with the set of objectives and research designs spelt out in the research process.

3.1 Definition of Farmer, Farm, and Farming System

A farmer is a person engaged in agriculture, raising living organisms for food or raw materials. The term usually applies to people who do some combination of raising field crops, orchards, vineyards, poultry, or other livestock. A farmer might own the farm land or might work as a laborer on land owned by others. In most developed economies, a “farmer” is usually a farm owner (landowner), while employees of the farm are known as farm workers (or farmhands). However, in other older definitions a farmer was a person who promotes or improves the growth of plants, land or crops or raises animals (as livestock or f ish) by labor and attention. Over half a billion farmers are smallholders, most of whom are in developing countries, and who economically support almost two billion people. Globally, women constitute more than 40% of agricultural employees.

A farm is an area of land where livestock (animals) are raised and crops (plants) are grown for use as food, fiber, and fuel. The people who own and work on the farm are called farmers.

Introduction

Quality is very important in any production and operation system. It ensures whether the products produced or the services provided are of the right quality in right quantity at right time. Quality management must ensure proper quality of the product to survive in the market and expand its market. Quality of the product must be given importance to avoid quality failures that cause serious human inconveniences and wastage of money.

5.1. Definitions and Terminologies

5.1.1. Quality

We say a product is of satisfactory quality, if it satisfies the consumers. According to C. D. Lewis, a British writer, quality is “an asset which is offered to the potential customer of that product or service”. The International Organization for Standardization (ISO) has put up a more comprehensive definition of quality as “the degree to which a set of inherent characteristics fulfils requirements” (ISO 9000: 2005 – 3.1.1). In general terms, ‘quality’ is defined as the composite of characteristics that differentiate individual units of a product to determine its acceptability by the customer. Quality characteristics are nothing but elements that makes a product fit for use. Quality characteristics are further classified into categories called as parameters.

5.1.2. Total Quality Management

Total Quality Management (TQM) is an organization’s management approach, centered on quality. It improves the effectiveness and flexibility of a company or an organization. TQM is defined as “the system of establishing defect prevention actions and attitudes with a company or an organization on a permanent basis for the purpose of assuring conforming products or services directed at customer satisfaction”. TQM is based on the participation of all its members in decision making, which is aimed for long-term success, through customer satisfaction and benefits to the members of the company or organization and to the society.

Introduction

In all countries, food is governed by a complexity of laws and regulations, which set out the Government requirements to be met by food chain operators to ensure food safety and quality. Food laws and regulations also govern standards that ensure the safety, quality, composition and suitability of food for consumers. Food laws and regulations of any nation depends on whether a nation adopts International norms developed by the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organization (FAO) of the United Nations as well as the World Health Organization (WHO).

8.1. Food Laws

Food law means legislation that regulates the production, trade and handling of food. It covers the regulation of food control, food safety, quality and relevant aspects of food trade across the entire food chain, from the production to the consumer. Food laws protect the consumers against unsafe, adulterated and misbranded food and facilitate the movement of food across borders to sustain a fair trade.

Each nation administers its own laws, regulations and standards. It is also not static always and is constantly revised and updated in all nations. The food business operators (FBO) must obtain up-to-date information on any changes made in legislation, that are likely to affect the product standards. The regulations of all nations shall be obtained from their respective websites of the national ministries.

8.1.1. International Legislations

8.1.1.1. United States of America (USA)

In USA, the Food and Drug Act (1906) and the Federal Meat Inspection Act (1906) are the first federal food laws passed to protect American consumers. Later, Food, Drug and Cosmetic Act (1938) regulated the meat and poultry products. At present, Food Safety Modernization Act (FSMA), 2011 regulates all food products. https://www.fda.gov/food/guidance- regulation- food- and dietary- supplements/ food- safety- modernization- act- fsma. Manufacturers play important role in preventing food borne illness. The Act gave the Food and Drug Administration (FDA) the authority to oversee and enforce supply chains. The Act shifts the focus towards prevention of food borne illness and insists every FBO to register with the FDA.

Introduction

Wastes produced during fish processing operations can be solid or liquid. Solid wastes consist of skin, viscera, fish heads, fish bones, and scraps of f lesh. Liquid wastes are the blood water and brine from drained storage tanks, water discharges from washing and cleaning, blood and soluble substances from entrails, and detergents and other cleaning agents. The effluent from the processing of fatty fish contains very high levels of oil. Overall, the wastewater from fish processing operation contains an undefined mixture of substances, mostly organic in nature.

13.1. Physicochemical Parameters of the Wastewater

13.1.1. pH

The pH is an important parameter that reveals contamination level before biological treatment. The effluents from fish processing plants are usually close to 7 or alkaline, due to decomposition of the proteinaceous matter and emission of ammonia compounds.

13.1.2. Solids Content

Solids may be present either in dissolved or suspended form. Suspended solids are objectionable as they settle in the wastewater ducts reducing their capacity or settle in the waterbody affecting bottom - dwelling flora or sometimes float reducing the light entering from the surface or remain suspended reducing the amount of light that enters the water. The settling solids are measured using an Imhoff cone. If the wastewaters contain solids that settle after 10 min, their discharge is usually not permitted. The suspended solids are measured by passing a sample through a fiberglass filter; and determining the quantity by gravimetry, after evaporation of a known volume of the filtrate.

Introduction

Indian fisheries and aquaculture is an important sector of food production providing nutritional security, besides livelihood support and gainful employment to more than 14 million people, and contributing to agricultural exports. With diverse resources ranging from deep seas to lakes in the mountains and more than 10% of the global biodiversity in terms of fish and shellfish species, the country has shown continuous and sustained increments in fish production since independence. The sector constitutes about 6.3 percent of the global fish production and contributes to 0.91 percent of the GDP and 5.23 percent of the agricultural GDP. The total fish production of 13.34 million metric tonnes presently has nearly 74 percent contribution from the inland sector and rest by the marine sector. Paradigm shifts in terms of increasing contributions from inland sector and further from aquaculture have been significant over the years. With high growth rates, the different facets, viz., marine fisheries, coastal aquaculture, inland fisheries, freshwater aquaculture, and coldwater fisheries are contributing to the food basket, health, economy, exports, employment and tourism of the country. More than 50 different types of fish and shellfish products are being exported to 75 countries around the world. Fish and fishery products have presently emerged as the largest group in agricultural exports from India, with 13.77 lakh tonnes in terms of quantity and ` 45,106.89 crore in value. This accounts for around 10% of the total exports and nearly 20% of the agricultural exports, and contribute to about 0.91% of the GDP and 5.23% to the Agricultural GDP of the country.

The Pradhan Mantri Matsya Sampada Yojana (PMMSY) is an initiative launched by the Government of India to establish a comprehensive framework and reduce infrastructural gaps in the fisheries sector. The scheme was announced by the Finance Minister, Smt. Nirmala Sitharaman during her speech in the Parliament of India while presenting the Union budget for 2019–20 on 5 July 2019. The government intends to place India in the first place in Fish production and processing by implementing Blue Revolution. This scheme is in line with government’s aim to double the farmers’ income by 2022–23.The policy envisages integrating all the fishermen with agricultural farmers and providing all the facilities available through various farmer welfare schemes to the fishermen. A new dedicated Department of Fisheries was constituted in a newly carved out Ministry of Fisheries, Animal Husbandry and Dairying to implement this and other policy initiatives of the government.

Key Facts

• Global fish production peaked at about 171 million tonnes (MT) in 2016, with aquaculture representing 47 perc ent of the total and 53 per cent of non-food uses (Global capture fisheries production was 90.9 MT in 2016)

• World fish production is projected to increase by 15% in the next 10 years, reaching around 200 MT per year

• The total first sale value of fisheries and aquaculture production in 2016 was estimated at USD 362 billion, of which USD 232 billion was from aquaculture production

• Fish (including shellfish) provides essential nutrition for 3 billion people and at least 50% of animal protein and minerals to 400 million people from the poorest countries

• 10-12% people, i.e. over 870 million people, depend on fisheries and aquaculture

• Aquaculture is the world’s fastest growing food production system, growing at 7% annually

• Women account for 19% of all people directly engaged in the fisheries and aquaculture sector, and over 50% when including the post-harvest sector

Climate Change: A global externality

Climate Change (CC) is a result of the externality associated with greenhouse gas emissions. It entails costs that are not paid for by those who create the emissions.

Distinguished Features from Other Externalities

• Climate change is global in its causes and consequences;

• The impacts of climate change are long-term and persistent;

• Uncertainties and risks in the economic impact are pervasive;

• There is a serious risk of major, irreversible change with non- marginal economic effects

Definition of Climate Change

Climate change refers to a statistically significant variation in either the mean state of the climate or in its variability, persisting for an extended period (typically decades or longer).

Introduction

Development and standardisation of diagnostics for aquaculture health management have undergone great improvements over the last three decades. Diagnosis in aquaculture health management involves several stages starting from farm-level observations to conventional laboratory identification and histopathology to sophisticated modern molecular tools. Accordingly, diagnosis can be broadly categorised under three levels depending on the level of scientific development.

1. level-I detection system, farm site observation and record-keeping;

2. level-II system, conventional laboratory identification employing microbiology, parasitology, and histopathology and

3. level-III system, advanced and specialized immunological and biomolecular techniques.

The interaction of an antibody with an antigen forms the basis of all immunochemical techniques. Antibody binds specifically to an antigen at epitope or antigenic determinant level and this property has been used for development of immunodiagnosis. Furthermore, as antibodies react with antigen at ambient conditions and do not require sophisticated equipment ideal field test kits can be developed. Biomolecular tools using nucleic acid probes although very sensitive are costly and time-consuming requiring sophisticated equipment and trained personnel. Against this background, there is always a need for developing simple, low-cost, rapid yet sensitive farm- level diagnostics. Such field-level tests facilitate screening a large number of samples by a large number of poor and medium-sized farmers who constitute a majority in developing countries. Large-scale screening besides empowering farmers is considered to be ideal for effective health management. Antibody probes provide an ideal format for developing simple field-level diagnostics as antigens ideally react with antibodies at ambient conditions without requiring sophisticated equipment. Available technology for raising large quantities of monoclonal antibodies (MAbs) against pathogens has increased the scope for developing field detection kits in human, animal and agricultural health management. Several farmer-friendly detection systems also referred to as point-of-care (POC) detection method based on antibodies have been innovated in the recent past. POCT is defined as ‘medical diagnostic testing at the time and place of patient care.

Any technique that uses living organisms or substances from these organisms to make or modify a product or to improve plant or animal or to develop microorganism for specific uses, can be termed biotechnology. Biotechnology involves microbes or cells derived from plants and animals for efficient production of useful products for mankind. The use of microbes for production of alcohol and penicillin, to name a few, is well known. However, in the last 25 years, several novel organisms, yielding useful products have been created by genetic engineering. Today, there is a wide application of biotechnology in human medicine, agriculture and animal husbandry in the area of diagnosis prophylaxis and therapy.

Aquaculture industry has undergone a sea change world over in the last three decades. The important needs of the industry are development of fast growing disease resistant fish and shellfish varieties, development of cheap and effective vaccines, disease diagnostics, cell lines sand probiotics. Efforts on these lines have already begun since 3-4 decades and results are highly promising. Some of the biotechnologies employed in aquaculture health management (Plate 15) are fish cell lines, monoclonal antibodies and nucleic acids for diagnostics sub unit and nucleic acid vaccines for prophylaxis, transgenes for disease resistance, gene editing in fishes and their pathogens and probiotics for bioremedial measures.

A. Cell Lines for Health Management

Cell lines are transformed cells that are adapted well to grow and multiply outside the host in in vitro culture systems. Cells lines can be developed from fast growing tissues of young fish. There are two methods of developing cell lines (1) Explant method, (2) Enzymatic method. Cell lines are grown in sterile plastic or glass containers containing appropriate medium having nutrients salts, antibiotics, buffers, serum etc. Minimum essential medium (MEM) is the common medium employed for fish cell line. Cell lines are developed, characterised and deposited in national and international repositories, which can be procured for use in research and industry.

Introduction

The transgenic approach can be an effective alternative for the development of biofortified crops when there is limited genetic variation for the targeted nutrient content among the germplasm (Zhu et al. 2007). Transgenic approaches have been used for the simultaneous integration of genes involved in the enhancement of micronutrient concentration as well as reduction in the concentration of antinutrients, resulting in enhancing the bioavailability of nutrients in plants. Development of biofortified crops employing the transgenic approaches, involves a significant amount of time, effort, and resources during the development stage, but it is a cost-effective and sustainable approach in a long run (Garg et al., 2018). For its wide consumption, rice has been targeted to address the global challenge of malnutrition. Vitamin deficiency can be considered as one of the significant challenges that affect poor section of populations due to low affordability. Development of ‘Golden Rice’ with provitamin A (beta-carotene) was recognized as an important breakthrough in this direction by expressing genes encoding PSY and carotene desaturase (Datta et al. 2003). Folic acid (vitamin B9) is important during pregnancy and reducing anemia. Rice was genetically modified to increase folate content (up to 150-fold) by overexpressing genes encoding Arabidopsis GTP-cyclohydrolase I (GTPCHI) and aminodeoxy-chorismate synthase (ADCS) (Blancquaert et al. 2015). Rice has also been targeted to address the global challenge of iron deficiency anemia. Multiple reports indicated an enhance in iron content by overexpressing a number of genes (Lee et al. 2009). Similarly, zinc content was also raised in rice by overexpressing OsIRT1 and mugineic acid biosynthesis genes from barley (HvNAS1, HvNAS1, HvNAAT-A, HvNAAT-B, IDS3) (Lee and An 2009, Masuda et al. 2008).

The Review of literature is a systematic, explicit and reproducible method of identifying, evaluating and synthesizing the existing body of a completed and a recorded work produced by researchers, scholars and practitioners. The Review of literature is also a resource paper which includes the current knowledge including substantive findings as well as the theoretical and the methodological contributions to a particular topic. These are available mostly in academic and scholastic journals.

Review of literature provide the basics for research in nearly every academic f ield. This chapter is an extensive survey of all past studies relevant to the field of investigation which gives knowledge of what others have found out in the related field of study. In any scientific investigation or research, a comprehensive presentation of the review of literature is a statutory requirement.

The aim of review of literature is to highlight what has been done so far in the field of interest and how our findings are related to earlier research.

Its main functions are to develop a better understanding of the problem to be investigated, delineate a new area of study and avoid unnecessary duplication, decide on the tools and techniques to be adopted including developing some new ones and also to relate the present study with the previous ones by finding out the areas of agreement and disagreement.

Introduction

Agriculture is the backbone of every country. It largely depends on climate and its changes. Over the last few years climate change has affected crops, cropping systems, patterns and the ecosystem hugely. Climate change is caused by greenhouse gases in the atmosphere, which results in global warming (Aydinalp and Cresser, 2008). The rising temperature, melting of glaciers, loss in vegetation cover, frequent occurrences of drought and floods are some of the issues that have raised concern among the environmentalists. The change in temperature and precipitation patterns alters the traditional growing seasons. Climate change is expected to influence crop and livestock production, hydrologic balances, input supplies and other components of agricultural systems (Adams et. al., 1998). Vulnerability of climate change depends on physical, biological and socio-economic characteristics. Low income populations dependent on isolated agricultural systems are particularly vulnerable to hunger and severe hardship. These populations are already barely food-sufficient, even the slightest decline in yields could be very harmful in these areas. The most negative effects are foreseen in dry land areas at lower latitudes and in arid and semi-arid areas, especially for those reliant on rain fed, non-irrigated agriculture (Aydinalp and Cresser, 2008). The rise in temperature cause stress in crops and reduce yields and productivity. Crops that are sensitive to temperature during the growth stages are affected a lot. A shift in growing season is being seen due change in temperature. Irregular and altered patterns of rainfall are severely affecting the crops and water supplies for livestock, which in turn has increased the occurrence of floods and drought, causing soil erosion, disrupting harvesting schedules. Occurrence of new pests and diseases are seen in the places having warmer temperature. Altered temperature has altered the life cycle of pests and intensity of infestations. Rising of sea water level and increased evaporation leads to intrusion of salt water into fresh water making irrigation water more saline harmful to crops. Livestock are sensitive to heat stresses which in turn reduce livestock productivity and increase mortality rates.

2.1 Introduction

Water is the most precious gift of the nature and it is also the most crucial element for sustainability of the life in the earth. India is the largest user of freshwater in the world. India’s total water consumption alone is the higher than any other continents. The Agricultural sector is the largest consumer of water followed by the domestic sector and the industrial sector. The role of irrigation water as one of the most essential inputs for crop cultivation can’t be denied. As a traditional productive input, it ensures production by acting as an agent of insurance against inadequate and inconsistent monsoon. Ultimately the outcome provides agricultural production stability. Thus, irrigation is of prime importance in cultivation of vegetable crops as it ensures favourable water balance within the root zone in addition to natural precipitation. It fulfils the crop- water demand and improves the crop production and effectiveness of other agricultural inputs. It is also an important limiting factor of crop yield, because of its association with several factors of plant environment, which directly influence the crop growth and development (Yaghi et al., 2013). The various irrigation methods under different system of irrigation differ with regard to extent of control, timeliness and adequacy of supply of irrigation water for crop cultivation. Consequently, the economic benefits and the costs due to these irrigation methods vary among different irrigation systems. The dominant method of irrigation practiced in large parts of the country is surface irrigation (basin, border and furrow) where the entire soil surface is almost f looded without considering the actual consumptive requirements of the crops. Frequent over or under irrigation create the problems of water stress or water logging leading to reduced irrigation efficiency (less than 30%).

Bovine milk contains an average of 3.5% protein. The concentration of protein changes significantly during lactation. The first few days of lactation exhibit the main change in protein concentration. The main changes occur in whey protein fraction.

Distribution of Protein in Milk

80% casein and 20% whey protein (β lactoglobulin- 10%, α- lactalbumin- 5%, serum albumin, and immunoglobulin- 5%).

Fractionation of Milk Proteins Fractionation of milk protein is mainly done by acidification at pH 4.6 around 30 °C.

Almost 80% of the bovine milk protein precipitates at pH4.6, and this fraction yielded by precipitation is called casein.

The remaining soluble part of the protein is referred to as whey protein/serum protein/ non- casein protein. Wide variation is observed in the casein- whey protein ratio in different types of milk(protein synthesis is independent of animal diet)

Significant Difference Between Casein and Whey Protein

1. Casein precipitates at pH 4.6 but does not precipitate whey protein at that pH. This property of milk protein is commercially exploited for the preparation of industrial casein and certain varieties of cheese.

2. Chymosin or other proteolytic enzymes produce specific changes in casein resulting in coagulation in the presence of calcium. Whey protein does not undergo this type of coagulation.

3. Casein is very stable to high temperatures. They can withstand heating up to 140 °C for 20 minutes but whey protein is relatively heat labile. They are completely denatured by heating at 90 °C for 10 min.

4. Casein is a phosphoprotein containing an average of 0.85% phosphorous while whey protein does not contain any phosphorous. The phosphate of casein is an important contributor to remarkably high heat stability and calcium- induced coagulation of rennet- altered casein.

5. Casein contains very low sulfur (0.8%) whereas whey protein is relatively rich in sulfur (1%). The principle casein contains only methionine but whey protein contains a significant amount of cystine, cysteine, and methionine. These sulfur- containing amino acids are responsible for many changes in milk on heating.

6. Casein is synthesized only in the mammary gland and no other sources in nature. Some of the whey proteins β lactoglobulin, and α- lactalbumin are synthesized in the mammary gland but bovine serum albumin and immunoglobulin are not synthesized in the mammary gland but derived from blood.

7. The whey protein is dispersed in solution and has a simple quaternary structure. Casein has a complex quaternary structure and exists in milk as large colloidal aggregates.

History

• Aristotle (384-322 BC): A good beginning of taxonomy was made by Aristotle (Historia Animalium). He erected entomon. He could distinguish mandibulates and haustellates; winged and wingless forms. The insect orders like coleopteran, dipteral, psyche (Lepidoptera) were created by him. Hence, he was called as Father of Biological Classification.

• Linnaeus (1707-1778): Father of Taxonomy and Binomial Nomenclature. He coined the term Insecta. He used the term Systematics. His greatest contribution is Systema Naturae.

• Brawer (1885): Laid foundations for modern system of classification and responsible to divide class Insecta into Apterygota and Pterygota.

• Michael Anderson (1727-1806): Contemporary and rival of Linnaeus. Introduced Numerical Taxonomy and hence is called Father of Numerical Taxonomy. 

• Johan Christian Fabricius (1745–1808), the first systematist considered to specialize on insects, published in 1778 his Philosophia Entomologica (40), the first textbook of entomology.

• Fabricius had already set forth his system of insects in 1775 (Systema Entomologiae), his system of genera in 1776 (Genera Insectorum), and then numerous works on species, culminating in individual accounts of the species of each order

INTRODUCTION

Ecosystem services and biodiversity conservation are well recognized as essential to human well-being and have become a policy priority. India is gifted with a large coastline and vast stretches of coastal wetlands. The estuaries and back waters which may include mangroves, mud flats, bays etc. extend over a large part of the Indian coasts. The mangrove ecosystem functions as a habitat for nurseries, thus benefiting fishers in the food chain (Mumby et al., 2004; Venkatachalam et al., 2018). Mangrove habitats increase the survival ratio of young fish that migrate to other offshore habitats when they mature, resulting in the enrichment of fish biomass in adjacent mangrove areas (Mumby et al., 2004; Aburto-Oropeza et al., 2008). Mangroves enhance fish production by providing food and shelter to fishery resources. Mangrove forests are highly productive, with average primary productivity level similar to that of tropical terrestrial forests (Alongi, 2009). Therefore, mangrove loss could have a devastating effect on fishery outcomes. The estimated fish catch is up to 70% higher in mangrove areas than in non-mangrove areas (Das, 2017).

NATURE OF MANGROVE FORESTS

Mangroves are amongst the most productive marine ecosystems on the Earth, providing a unique habitat opportunity for many species and key goods and significant services for human beings. They are salt tolerant plants, and are found distributed growing in estuaries, lagoons, backwaters and bays at the land-sea interface in tropical and subtropical areas of the world. Mangroves thrive on low-oxygen through the breathing roots or pneumatophores that are used for respiration. They need freshwater for their growth and so they live at the sea edge, they must remove the salts from the water that is taken in by the roots.

INTRODUCTION

Coral reefs are fragile and most diverse and valuable ecosystems on earth. The stony corals are formed from the tiny, soft colonial organisms called polyps. They provide enormous ecological, economic services, and cultural value to hundreds of millions of people. They are significantly contributing to the nutrition, economic security and protection from natural disasters. They are often termed as the rain forests of the sea.

Coral reefs were first appeared 485 million years ago during the early Ordovician period. They belong to the class Anthozoa of animal phylum Cnidaria, which includes sea anemones and jelly fish. Coral reef is an under water ecosystem which is characterized by reef-building corals. Unlike sea anemones, colonies of coral polyps secrete a hard exoskeletons called reef which is made up of calcium carbonate to support and protect the corals. These reefs grow best in warm, shallow, clear, sunny and agitated water.

BIODIVERSITY

The term biodiversity was coined by Walter G. Rosen in the year 1985. Biodiversity refers to the variation among living organisms that can be found in a particular area such as terrestrial, marine and desert ecosystems and the ecological complexes to which they are a part. The study of biodiversity helps to understand the ecological stability, economic and ethical importance. Coral reefs are believed to have the highest biodiversity on the planet even more than a tropical rainforest. Though the coral reefs distributed in less than one percent of the ocean floor, they provide habitat for more than 25% marine life with more than 4,000 world’s fishes. They act as protective nurseries to many fish species, and shelter small fishes to grow. Coral reefs diversity is so rich that we do not have a firm count on all the species that live within it and every year discover new species.” There are about six thousand coral species in the world, in which few are growing in warm shallow waters near coastlines while others in the dark, cold seafloor of the open ocean.

INTRODUCTION

Lakes are of immense ecological, economic, and cultural significance, representing integral features within our planet's landscapes. Studies show that there are around 117 million lakes worldwide, constituting about 4% of the Earth's non-glaciated land surface (Verpoorter et al., 2014). These lakes play a crucial role in providing essential services to nearby communities and serve as important centres for recreation and overall well-being. However, the increasing demand for natural resources has led to widespread degradation of these lakes (Jenny et al., 2020). Despite efforts to restore lakes, there is a prevailing perception that such programs often encounter high failure rates (Søndergaard et al., 2007; Gulati et al., 2008; Poikane et al., 2024). This concern is particularly pronounced in less economically developed countries, where populations are highly exposed to the consequences of lake degradation, and monitoring, assessment, and restoration programs may be in nascent stages. Additionally, lakes play a pivotal role in climate regulation, influencing local weather patterns and contributing to global processes such as water and carbon cycles. Recognizing and preserving the significance of lakes is imperative for sustaining ecosystems, ensuring water security, and nurturing the well-being of both the natural environment and human societies. 21o 8’ 55’’ 79o 4’46’’E.

Nagpur situated at coordinates 21o 8’ 55’’ N and 79o 4’46’’E, holds the distinction of being the second capital of Maharashtra. Renowned as the "orange city" and the "city of lakes," Nagpur relies significantly on its lakes as a valuable resource base. The current water supply for the city is primarily sourced from, Kanhan River, Gorewada Lake, and Pench Dam. Futala Lake serves an irrigation purpose, benefitting 84 acres of cultivated agricultural land. Ambazari Lake, on the other hand, caters to the water needs of local residents in the MIDC colony, Hingna area, Nagpur, and supports industrial purposes. Other notable water bodies in Nagpur include Sonegaon, Gandhisagar, Naik, Sakkardara, and Lendi. However, these lakes face severe pollution due to anthropogenic activities such as bathing, washing clothes, and improperly disposing of plastic, paper, oil, and worship materials. Moreover, the lakes Gandhisagar and Lendi are now dried.

Vital Statistics

It is defined as that branch of biometry which deals with data and the laws of human mortality, morbidity and demography. According to N.B. Ryder, they “provide cumulative summaries for successive time periods of population movements like birth, death, migration, marriage and marital dissolution as well as demographic and other relevant characteristics of the individuals involved in these events.”

Measures of Vital Statistics of Population

The total number of vital events such as births and deaths are converted into rates and ratios for comparison of vital statistics from place to place or year to year. In order to determine the population at any time ‘t’ after the census or between two censuses, a number of methods have been devised. Therefore, a suitable method which makes use of births, deaths and migration statistics, if we assume that:

(i) The census data gives us the total size of the population of a region or community together with age and sex distribution

(ii) The birth, death and migration statistics during different periods are obtained from registers.

The states in the Eastern India where pineapple is grown include West Bengal, Bihar and Odisha. In between this states the ideal condition for pineapple is found in most parts of north Bengal and some north eastern districts of Bihar. West Bengal ranks first in production of pineapple in India (Figure 2).

West Bengal and Bihar

West Bengal ranks ninth in fruit production in India with a total production of 3850.5 thousand ton from 261.02 thousand hectare area (Table 1). Major fruit crops are mango, banana, pineapple, guava, litchi, jackfruit, mandarin, papaya and sapota. A large number of other fruit crops such as Jamun, bael, custard apple, ber, lime, lemon, plum, karonda, aonla, etc. are also grown in various parts of the state (Mitra, 2013). Pineapple is one of the important fruit crop of West Bengal covering an area of 11,410 ha with an average productivity of 30.24 t ha-1(Table 2). The state of West Bengal, having five distinct agro climatic zones, is ideally suited for growing several tropical and subtropical fruits. These agro-climatic zones are:

I. Hill zone II. Terai zone III. Alluvial zone IV. Laterite zone

V. Coastal zone In between these five agro-climatic zones commercially pineapple is grown mostly in Terai zone which is situated at the foot hills. High rainfall, light acidic soils and prolonged monsoon are characteristics of this zone. So the districts are Darjeeling, North Dinajpur, Jalpaiguri and some parts of Alipurduar. Besides terai zone other places where pineapple is grown in small scale or for experimental purpose are described below.

Definitions

Pathology

Pathology is the study of the anatomical, chemical and physiological alterations from normal as a result of disease in animals. It is a key subject because it forms a vital bridge between preclinical sciences (Anatomy, Physiology, Biochemistry) and clinical branches of Medicine and Surgery (Fig.1.1). Pathology is derived from the Greek word pathos = disease, logos = study. It has many branches, which are defined as under:

General Pathology

General Pathology concerns with basic alterations of tissues as a result of disease. e.g. fatty changes, thrombosis, amyloidosis, embolism, necrosis (Fig. 1.2).

Systemic Pathology

Systemic Pathology deals with alterations in tissues/organs of a particular system. e.g. respiratory system, genital system etc. (Fig. 1.3).

Introduction

Drip irrigation is an efficient method of application of water at the plant bottom at a rate nearly equal to the consumptive use rate of the plant, thereby minimizing the conventional water losses like percolation, runoff and evaporation from soil. It is a process of slow application of water on, above or beneath the soil by the surface, sub-surface, bubbler, and spray or pulse system. Fertilizer can also be applied with the drip water. Emitters or applicators are placed closed to the plants and used to spray water in the form of drops, tiny streams or miniature spray. In the drip system water applied from the point source advances in all direction in the soil outward from the source. Drip irrigation is essentially a low rate, low pressure, frequent and long duration application of water in plants root zone area.

Drip irrigation is also called as localized irrigation, trickle irrigation, daily f low irrigation, diurnal irrigation, drop irrigation, sip irrigation, and micro irrigation. A particular name is being popularized in any area depending on the choice of the people of that area. The International Commission for Irrigation and Drainage (ICID) has recommended the term micro-irrigation while the American Society of Agricultural Engineers (ASAE) has preferred drip irrigation. In India it is told as drip irrigation.

In May 2020, The Government of India launched the flagship scheme called Pradhan Mantri Matsya Sampada Yojana (PMMSY), with an estimated investment of Rs. 20050 crores, comprising a Central share of Rs. 9407.00 crores, a state share of Rs 4880.00 crores, and a Beneficiary contribution of Rs. 5763.00 crores for its implementation during a period of 5 years from FY 2020-21 to FY 2024-25 in all States/Union Territories (Guidelines on Entrepreneurship Models in Fisheries and Aquaculture under PMMSY, 2020). The PMMSY will address critical gaps in fish production and productivity, quality, technology, traceability, post-harvest infrastructure, and management.

Fisheries and aquaculture sector have been increasingly recognized for their essential contribution to global food security and nutrition. In 2020, total global catches in inland waters were 11.47 million tonnes and India stands top in the world with 1.8 million tonnes. India has witnessed remarkable growth in fish production in the last couple of years and stands second in world aquaculture production. The total fish production during 20-21 is estimated at 14.7 million metric tonnes (MMT) with a contribution of 11.25 MMT from inland sector and 3.48 MMT from marine sector. During FY 2020-21, export of marine products stood at 1.15 MMT and valued at Rs. 43,717.26 crores despite the market uncertainties raised by the Covid-19 pandemic outbreak. The inland open water resources of India are the life line of country?s vast population and provide nutritional and livelihood security besides other innumerable economic, social and ecological services. In addition to India, countries of Mekong cooperations including Myanmar, LaoPDR, Vietnam, Copyright: New India Publishing Agency, New Delhi, India. Commercial Use will call for Legal Action. Cambodia and Thailand contribute significantly to the Asian Fish production. As per FAO (2022) report, a number of Asian countries majorly contribute to the Inland capture fisheries production including India, Bangladesh, Myanmar and Cambodia have reported a steady or decline in fish catch, since the last few decades. Though there are several potential threats behind this declining fish production trend, major is linked to water availability, pollution, overfishing and climate change. 

Introduction

Stress is any unfavorable condition for a plant’s normal growth and development. In the case of crop plants, such adverse conditions are caused by biological (biotic) and non-biological (abiotic) environmental factors. Abiotic stress is the negative impact of non-living factors on living plants in a specific environment. Usually, abiotic stress is unavoidable, and we can only go for its management.

The most basic stresses include:

• Extreme (high/low) temperatures

• Soil-chemical properties

• Water deficiency

• Excessive moisture

• Element toxicity or deficiency

Importance and uses

Walnut is a valuable nut crop that is grown in several regions of the world, including India. The nut is a rich source of several nutrients, including protein, fiber, omega-3 fatty acids, and antioxidants. Walnuts have several health benefits, including reducing the risk of heart disease, improving brain function, and reducing inflammation. They are also used in several industries, including food, pharmaceuticals, and cosmetics.

Walnuts have been an important food source for humans for thousands of years. In ancient times, they were believed to have medicinal properties and were used to treat several ailments (Martinez et al., 2010). Today, they are used in the food industry to produce confectionery, bakery products, and as an ingredient in several cuisines. They are also used in the pharmaceutical and cosmetic industries due to their anti inflammatory and anti-aging properties (Alasalvar et al., 2010; Bolling et al., 2011).

Walnuts are a rich source of antioxidants, which are important for maintaining good health. Antioxidants help to neutralize free radicals in the body, which can cause cell damage and lead to several chronic diseases, including cancer and heart disease (Alasalvar et al., 2010). In addition, walnuts are an excellent source of omega-3 fatty acids, which are important for brain health and reducing inflammation in the body (Bolling et al., 2011). Walnuts also contain fiber, which is important for maintaining healthy digestion and reducing the risk of colon cancer (Martinez et al., 2010).

Introduction

Soil is a very precious natural resource. It is considered as the epicentre of all the life forms on earth. One cm of soil takes about 1000 years to form but if not used sustainably and managed properly, it may degrade and get converted into a wasteland in just few countable years. The heavy population load, rapid industrialization, unscientific agricultural practices have already put a lot of pressure on soil resulting in reduced soil fertility, degraded wastelands and problematic soils. In India, out of the 329 m ha of geographical area, nearly 50% is subjected to degradation by the various agents like water, wind and biotic interference. In this chapter we will focus on the wastelands and problematic soils, their distribution, cause of formation, management practices mainly in respect to the Indian state of Jharkhand.

7.1. Introduction

Preservation of fruit and vegetables by application of heat is one of the important methods of food preservation as it not only imparts desirable effect in the eating quality of the food but also exerts a preservative effect on the foods by destruction of micro-organisms, enzymes, insects and parasites. Other advantages of heat processing include destruction of anti nutritional factors (e.g. trypsin inhibitor in some legumes), improvement in availability of some nutrients (eg improved digestibility of proteins, gelatinization of starches, and release of bound niacin), production of shelf-stable foods that do not require refrigeration and above all it offers a relatively simple control of processing conditions. The disadvantages of heat processing include alteration or destruction of sensory quality of foods like flavor, colour, taste and texture as a result the heat processed foods are perceived to have different quality as compared to fresh produce.

1. If AAGCT is the base sequence on one side of DNA molecule, what will be complementary sequence on the other side?

a) UUGCA

b) TTCGA

c) AAGCT

d) GGTCA

2. The start codon in the mRNA sequence is

a) AUG

b) UAG

c) UGA

d) UAA

Several independent research traditions have examined the diffusion of innovations. Fields such as anthropology, geography, and sociology have long aimed to understand current behaviours by tracing the diffusion of techniques and ideas from their origins to their present distributions. Critics argue that this tradition often focuses on descriptive history inferred from patterns of similarity (diffusionism) while neglecting causal processes. Extreme diffusionists sometimes postulated implausible links between societies.

Rural sociologists pioneered the quantitative study of innovation diffusion, with classic studies examining the spread of hybrid corn and 2-4-D weed killer in the American Midwest. This field has produced numerous studies, including many focused on the diffusion of modern techniques to Third World peasants. Similarly, researchers in educational reform have studied the spread of kindergartens, driver training, and modern mathematics curricula. Currently, there may be studies on the diffusion of General Education requirements in U.S. universities. Medical sociologists have investigated how new drugs spread among communities of physicians. Additionally, communications and marketing experts study how propaganda and advertising persuade people to adopt new ideas and products.

Social change encompasses alterations in both the tangible and intangible aspects of a society's culture. It involves transformations in the structure and dynamics of social systems, manifesting as shifts in:

• The roles assumed by individuals

• The values and norms upheld within society

• The framework of social institutions and structures

• The dynamics of interpersonal relationships

• The patterns of social interaction

• The functions fulfilled by various societal groups and institutions