eChapters

1. Introduction
One of the foremost environmental challenges the world faces today is airpollution. As industrialisation, urbanisation, and transportation continueunabated, harmful substance levels in the atmosphere have becomealarmingly high (Thanvisitthpon et al., 2024). This general contamination inthe air is not just a serious risk to humanity but also harms ecosystems whilcontributing to global climate change. Controlling airpollution has becomea critical necessity at this stage, with the need for innovative solutions inthis respect. Bioremediation is one of the innovative solutions, where certainmicroorganisms break down or neutralise pollutants in the air.

1. Introduction
1.1. The Growing Problem of Pesticide Pollution
Pesticides are used in very great amounts in agricultural production for theprotection of crops against pests, diseases and weeds. They are also veryinstrumental in boosting agricultural productivity by ensuring food securityand preventing losses that may be caused by outbreaks of pests (Popp et al.,2013). However, the extensive use of pesticides has generally resulted in hugeenvironmental concerns. Improperlymanaged pesticide residues may remainin soil, water and even air for many years and create severe ecological andhealth hazards in the long run (Zhang et al., 2024). This widespread existenceof pesticides in the environment has raised a serious alarm concerning theiradverse impacts on biodiversity, soil fertility and quality of water, furtherbioaccumulation in the food chain that affects wildlife and human populations(Aktar et al., 2009).

2.1 Mulkanoor Cooperative Society: An Introduction The Mulkanoor Cooperative Rural Credit and Marketing Society, established in 1956, in Mulkanoor village of today’s Telangana state of India, stands as a beacon of rural transformation. Post-independence, Shri A.K. Vishwanatha Reddy- a freedom fighter- envisioned a better future for farmers. His vision materialized through the formation of the Mulkanoor Cooperative Society, initially with 373 members and a modest share capital of ?2,300. The society has now grown to encompass 7,650 members, ?18 crores in share capital, and ?45 crores in thrift deposits, and offers a wide

Making a correct and an early diagnosis is very much important for undertaking rational and effective treatment for fast recovery, avoiding unnecessary medication, reducing the load of so many drugs on body metabolism, reducing environmental pollution and the cost of treatment. There are four important pillars for making a correct diagnosis viz. the history, the systematic clinical examination, the correct clinical diagnostic techniques and the laboratory support. History Taking Clinician’s first step in making a diagnosis is through asking the owner’s complaint. Accurate and complete history may be obtained from focusing on the details of the patient (name, number, species, breed, age, sex and weight), vaccination status, deworming schedule, nutritional history, past and present medical history and environmental history.

Farm Animals and Horses Urinary system mainly comprises of kidneys, ureters, bladder and urethra. In farm animals, diseases of urinary bladder and urethra are diagnosed with more frequency than that of kidneys. Renal insufficiency is observed as a sequel in cases of nephritis (pyelo or embolic nephritis), nephrosis or amyloidosis. Urinary diseases are clinically manifested with pain, dysuria, and variation in urine flow (polyuria, oliguria to anuria) and changes in urine (proteinuria, hematuria, hemoglobinuria, myoglobinuria, glycosuria, ketonuria, crystalluria, pyuria, and cellular casts). Decreased body weight, loss of appetite, polyuria, polydipsia and ventral edema are seen in chronic renal failure. Like dogs and cats, urinary tract is not accessible in large farm animals for clinical examination. Trans abdominal palpation of kidneys is feasible in calves and small ruminants. Rectal palpation, urine examination and renal function tests provide diagnostic assistance in the diseases of urinary tract in large animals. Clinical Manifestations Dysuria and abdominal pain are generally seen in urinary tract disease. Acute pain from urinary tract disease is not common. Pain associated with urethral obstruction and bladder

Indian river systems, spanning diverse ecosystems and climatic zones, are pivotal for sustaining the country's rich biodiversity, particularly regarding ichthyofaunal diversity. This chapter explores the ecological importance of major river systems such as the Ganges, Brahmaputra, Godavari, Krishna, and Cauvery in supporting various freshwater fish species essential to environmental balance and local economies. These rivers provide critical habitats and migration routes, facilitating the survival and reproduction of numerous fish species. However, pollution, habitat fragmentation, overfishing, and climate change have led to declines in fish populations and the loss of species diversity. The chapter underscores the importance of integrated conservation strategies that combine river ecosystem restoration, sustainable fisheries, and habitat protection to address these threats. Additionally, it highlights the need for community engagement, policy support, and technological innovations such as environmental DNA (eDNA) monitoring to ensure effective conservation of freshwater fish diversity. Through a comprehensive ecological approach, this chapter advocates for urgent measures aimed at preserving fish species within Indian river systems, promoting biodiversity, and supporting the communities reliant on these resources.

Heart of bovine, caprine, equine, canine and feline is a four chambered organ having left and right atrium, left and right ventricles, mitral valve, tricuspid valve, aortic valve, pulmonary valve, arteries, arterioles, veins and venules. Heart starts its functioning even before birth and continues till death. Its pumping action helps in providing nutrients as well as oxygen to all organs and parts of the body and to remove the waste products of the metabolism from the different organs of the body. Malfunctioning of the heart (pumping action and /or current generation and conduction) adversely affects nutrient and oxygen availability to organs and removal of waste products from the body lowering the quality of life and making the survival reasonably difficult. Heart functioning can be examined through physical examination of the heart such as general inspection (looking for abducted elbow, jugular distension or pulse, edema of ventral abdomen or limbs, tachypnea /dyspnea), evaluations of vitals (temperature, pulse, respiration,

Introduction Identification of animals is must as a requirement in the daily management to spot and identify a particular animal in a herd/group/flock. Objectives of Identification • Identification is done to carry out routine work efficiently. • For registration and recording of the parentage in breeding programme / birth • Identification required at time of transportation and Insurance and loan from Bank. • For individual feeding of animals. • During milking • During sale, for participation of animals in the rally, show and exhibition. • For treating the animal, heat detection etc. • It is necessary for in case of theft and loss of animal for complain and search of animal. Selection of Identification Method • Depends very much on Need and personal

Remote sensing and Geographic Information Systems provide spatial information for monitoring crops, land, soil and water resources. This chapter introduces their fundamental principles and explains developments involving satellites, UAVs, hyperspectral sensors, thermal imaging and cloud-based geospatial platforms. Analytical techniques include vegetation indices, time-series analysis, spatial modelling and artificial intelligence. Applications cover crop-health monitoring, yield forecasting, irrigation planning, drought assessment, pest and disease identification and soil-resource management. Integration with IoT, automation and other digital technologies improves the timeliness and resolution of agricultural information. These tools support evidence-based decisions responding to food-security, climate-change and natural-resource sustainability challenges.

Food preservation involves treating and safely handling food to prevent or delay spoilage while retaining colour, texture, flavour and nutritional value. Food deterioration may result from microbial growth, indigenous enzymes, oxidation, physical damage, insects, moisture, temperature and other environmental conditions. Bacteria, fungi and other microorganisms contaminate food through soil, water, air and biological sources. The effectiveness of preservation therefore depends on controlling intrinsic factors such as pH, water activity, nutrients and redox potential, together with extrinsic factors such as temperature, humidity and storage atmosphere. Understanding these mechanisms provides the scientific foundation for selecting safe and effective preservation methods.

Organizations operating in an interconnected global economy must consistently deliver reliable products and services while satisfying demanding customer and regulatory expectations. Internationally recognized standards and industry best practices provide structured frameworks for preventing defects, measuring performance and achieving continual improvement. They strengthen customer confidence, regulatory compliance, operational effectiveness and global competitiveness. This chapter introduces major quality-management systems and demonstrates their practical application across different industries. Particular attention is given to the ISO 9000 family and ISO 9001, which establish principles and requirements for formal quality-management systems. Important practices include risk-based thinking, process management, documentation, customer focus, evidence-based decisions and the continual improvement of organizational processes

Artificial intelligence offers practical solutions to agricultural problems associated with population growth, food demand, climate change and limited natural resources. This chapter introduces machine learning, deep learning, computer vision and natural language processing, together with enabling technologies such as IoT, remote sensing and cloud computing. It explains their applications in crop monitoring, disease recognition, yield forecasting, irrigation, soil assessment and livestock management. AI can improve decision-making, resource efficiency, automation and precision farming while reducing reliance on manual labour. The chapter also examines adoption barriers, including high costs, limited digital literacy, data-security concerns and weak rural infrastructure, and considers future developments in autonomous and climate-resilient farming.

Artificial intelligence can detect subtle changes in animal health before they become apparent through conventional observation. This chapter examines machine learning, deep learning and predictive analytics for livestock disease prediction and diagnosis. Models use physiological signals, diagnostic images, behaviour patterns, environmental conditions and historical records to recognize abnormalities and estimate disease risk. Wearable sensors and IoT devices enable continuous monitoring and early-warning systems, supporting preventive veterinary care and outbreak management. AI-based detection can reduce mortality, treatment costs and production losses while improving decision-making. The chapter also evaluates challenges involving inconsistent data, model interpretability, rural infrastructure, technical accessibility and the practical implementation of diagnostic systems.

Animal behaviour provides valuable information about health, welfare, reproduction, environmental adaptation and social interaction. Traditional observation is labour-intensive, time-consuming and vulnerable to observer bias. This chapter explains how machine learning automates behavioural analysis using video, sensor and bioacoustic data. It covers preprocessing, feature extraction, classification, clustering and recurrent neural networks for temporal analysis. Computer-vision techniques—including object detection, tracking and pose estimation—enable continuous and non-invasive monitoring. Case studies demonstrate applications in livestock management, wildlife conservation and laboratory research. The chapter also examines data labelling, model generalization, ethics, explainable AI, real-time processing and the integration of multiple behavioural data sources

Digital dairy farming integrates IoT, artificial intelligence, machine learning, big-data analytics, cloud computing, sensors and automation to improve herd management. This chapter explains how wearable devices and monitoring systems support early disease detection, welfare assessment, milk-yield analysis and precision feeding. Automated milking, feeding and other operations reduce manual labour, improve consistency and lower operating costs. The architecture of smart dairy systems—including sensors, wireless communication and decision algorithms—is examined alongside environmental and economic benefits. Barriers include high initial investment, limited digital skills, poor rural connectivity and cybersecurity risks. Future developments may include AI-enabled autonomous dairy farms and interconnected, sustainable agricultural ecosystems.

Robotics is transforming livestock production by automating repetitive, labour-intensive and precision-dependent operations. This chapter examines automated milking, robotic feeding, manure removal, health monitoring, drones and autonomous herd-management systems across dairy, poultry, swine and sheep production. Integration with AI, IoT and sensors creates connected environments capable of continuous monitoring and data-driven action. Benefits include higher productivity, lower labour requirements, timely animal care and more efficient resource use. Challenges include substantial investment, technical complexity, maintenance and farmer acceptance. Emerging developments such as autonomous farms, swarm robotics, solar-powered equipment and climate-smart robotic systems may further strengthen animal welfare, environmental sustainability and global food security.

The increasing deployment of Large Language Models across education, healthcare, finance, employment and public services has made fairness and ethical responsibility central concerns in AI development. LLMs learn from enormous datasets that may contain historical inequalities, stereotypes, cultural assumptions and other forms of social bias. This chapter examines the origins, manifestations and consequences of bias in LLMs and considers approaches for promoting fair and responsible deployment. It discusses data bias arising from the composition and curation of training datasets, algorithmic bias introduced through model architectures and learning processes, and bias associated with human-in-the-loop systems. Gender, racial and cultural biases are considered because they can influence generated outputs and potentially reinforce existing inequalities. The chapter also examines fairness evaluation, mitigation strategies, transparency, accountability and human oversight. Ethical concerns extend beyond bias to hallucination, misinformation, privacy and inappropriate automation. Effective governance requires continuous monitoring rather than one-time assessment because model behaviour may change across applications and populations. The chapter therefore emphasizes responsible AI principles that place fairness, transparency, accountability, safety and human interests at the centre of LLM development and deployment.

The emergence of Large Language Models has enabled the development of virtual teaching assistants capable of providing students with continuous, interactive, and personalized academic support. This chapter examines the role of LLM-powered chatbots and intelligent tutors in modern education. Unlike conventional digital resources, AI teaching assistants can engage learners through natural-language dialogue, explain difficult concepts, provide examples, generate practice activities, offer hints, and deliver immediate feedback. They can support individualized learning pathways by adapting explanations and learning materials to student needs, performance, and pace. The chapter explores applications in tutoring, assessment, academic guidance, interactive textbooks, student support, and self-directed learning. AI assistants can also reduce routine teacher workload by supporting activities such as grading, question generation, content recommendation, and classroom analytics. However, challenges remain concerning hallucination, accuracy, privacy, algorithmic transparency, inclusivity, and the appropriate balance between automated assistance and human mentorship. Large-scale and long-term evidence is still needed, particularly in diverse and low-resource educational settings. The chapter therefore emphasizes human–AI collaborative instruction, educator training, ethical integration, and responsible deployment of intelligent teaching assistants.

Inclusive education requires learning environments that recognize and respond to the diverse sensory, physical, cognitive, emotional, and learning needs of students with disabilities. The integration of Generative AI with Assistive Educational Technology and digital pedagogy creates new possibilities for removing longstanding barriers to participation and achievement. This chapter explores how intelligent technologies can provide flexible, adaptive, and personalized learning experiences for disabled students. It examines applications involving text-to-speech, speech-to-text conversion, screen readers, captions, intelligent interfaces, eye tracking, gesture-based controls, AR/VR, multimodal content, real-time feedback, and AI-supported personalization. Generative AI can further enhance conventional assistive technologies by producing customized written, visual, and audio learning materials according to individual requirements. Universal Design for Learning provides an important framework for ensuring that these technologies support accessibility and inclusion rather than creating additional barriers. The chapter also highlights the importance of individualized learning plans, teacher preparation, family and community engagement, emotional support, and stakeholder collaboration. By combining digital pedagogy, assistive technologies, and GenAI, educational institutions can move toward more equitable, accessible, learner-centered environments in which students with disabilities can participate meaningfully and develop their full potential.

The growing adoption of Generative AI in academic institutions has moved the technology from experimental applications toward practical implementation across teaching, learning, research, student support, and university operations. This chapter examines real-world applications and institutional case studies that demonstrate how GenAI can be incorporated into higher education and other academic environments. Key applications include AI tutoring and learning support, curriculum and course development, assessment and feedback, research assistance, student-success services, and institutional operations. AI writing coaches can provide individualized guidance, while dialogic mathematics and coding assistants can support problem-solving without simply providing answers. Educators can use GenAI to develop learning objectives, case studies, examples, question banks, rubrics, multimedia scripts, synthetic datasets, and practice environments. The chapter also considers institutional experiences with AI policies, academic integrity, accessibility, privacy, and professional development. Successful implementations generally combine technological capabilities with human review, clear institutional guidelines, and AI literacy. Case studies demonstrate both the potential and limitations of GenAI, emphasizing that effective adoption requires contextual evaluation rather than technology-driven implementation alone. The chapter provides practical insights for institutions seeking evidence-based and responsible approaches to educational transformation through generative AI.

Practical application is essential for developing competence in programme evaluation and agricultural extension programme management. This chapter translates the concepts, theories and evaluation frameworks presented in the preceding chapters into structured learning activities. The practical exercises are designed to develop students’ ability to analyse programmes, identify appropriate evaluation approaches, develop indicators, collect and interpret evidence, and communicate evaluation findings. Activities include literature searches on Utilization-Focused Evaluation, Values-Engaged Evaluation, Empowerment Evaluation and Theory-Driven Evaluation; field visits to extension organizations; preparation of evaluation proposals; review and meta-evaluation of programme evaluation reports; SWOT analysis; programme activity identification; Gantt chart preparation; application of Bennett’s Hierarchy; Logical Framework Analysis using a 4 × 4 matrix; and assessment of agricultural technology impacts through KVK/ATIC visits. The chapter also provides practical exercises on Environmental Impact Assessment, Social Impact Assessment, Participatory Monitoring and Evaluation, and comprehensive evaluation report writing and presentation. These activities are intended to strengthen analytical thinking, practical skills, evidence-based decision-making and professional competence in agricultural extension evaluation

Agricultural drones have emerged as important tools for precision farming, crop surveillance, and field-level data acquisition. This chapter introduces drones as aerial intelligence platforms capable of collecting high-resolution spatial and spectral information about crops, soil, and environmental conditions. It discusses drone architecture, sensing technologies, remote sensing, crop monitoring workflows, and crop health assessment. Artificial intelligence and machine learning enable efficient analysis of aerial imagery for disease detection, irrigation management, precision spraying, crop stress assessment, and yield prediction. The chapter also examines autonomous drones, drone swarms, IoT integration, edge computing, and digital twins. Operational limitations, regulatory considerations, data management, and sustainability implications are also addressed.

Vegetative propagation enables horticulturists to multiply plants while retaining desirable genetic characteristics of selected mother plants. This chapter covers important methods including cuttings, layering, budding, grafting, division, and specialized vegetative structures. The physiological basis of rooting, wound healing, callus formation, compatibility, and environmental requirements is discussed. Grafting and budding are particularly important for combining desirable scion characteristics with suitable rootstock traits such as vigor, disease resistance, stress tolerance, and adaptation. Proper sanitation and selection of healthy propagation material are emphasized to minimize pathogen transmission. Modern techniques such as rooting hormones, mist chambers, protected propagation, and clonal multiplication further improve the efficiency and uniformity of vegetative propagation.

A well-managed nursery is essential for producing healthy, uniform, vigorous, and field-ready planting material. This chapter explains nursery planning, site selection, propagation structures, growing media, containers, trays, irrigation, fertilization, sanitation, pest management, hardening, and transplant quality assessment. Protected raising techniques using shade nets, polyhouses, insect-proof structures, and controlled environments are discussed for improving germination and seedling survival. Particular attention is given to biosecurity, disease prevention, substrate sterilization, water quality, and environmental control. The chapter also introduces quality indicators such as root development, shoot growth, and physiological fitness. Efficient nursery management reduces establishment losses and provides the foundation for productive and profitable horticultural enterprises.

Biofertilizers focuses on microbial and biological resources that enhance nutrient availability and support crop nutrition. The chapter covers nitrogen-fixing organisms, phosphorus-solubilizing microorganisms, phosphate-mobilizing mycorrhizae, mineral-solubilizing biofertilizers, and plant-growth-promoting rhizobacteria. It explains applications, importance, liquid biofertilizer methodology, mass production, packaging, storage, and multiplication of bacterial, mycorrhizal, cyanobacterial, and Azolla-based inputs. By connecting microbial activity with nutrient cycling and plant growth, the chapter demonstrates the practical role of biofertilizers in reducing dependence on synthetic fertilizers and strengthening soil fertility. It provides an applied foundation for students, researchers, extension workers, and practitioners of sustainable agriculture. under diverse soil and climatic conditions and practice for field application in natural farming.

Cardiovascular examination provides essential information about cardiac function, circulation and vascular abnormalities. This chapter describes practical examination techniques including inspection, palpation, percussion and auscultation of the heart and peripheral circulation. Assessment of the cardiac impulse, heart sounds, murmurs, pulse quality, jugular veins and blood pressure contributes to identification of cardiovascular abnormalities. Electrocardiography is presented as an important diagnostic technique, including electrode placement and interpretation of standard leads. Echocardiography is also introduced for structural and functional cardiac assessment. The chapter provides species-specific practical approaches for cattle, horses and dogs, helping veterinary students recognize cardiovascular abnormalities systematically and accurately

1.1 Introduction

Like animals, plants are living beings and so require water and air for their survival. In addition, they need water for preparation of food by the process of photosynthesis. Majority of this water requirement of the crops is met from different forms of precipitation. However, when the water requirement is not fully met from precipitation, then growth of the crops is affected. This results in reduction of yield of the crops. The reduction in yield depends on the amount of scarcity of water requirement of the crops. It also depends on the stage of crop growth and also depends on the types of the crops. Generally all the crops are sensitive to water stress during reproductive stage. Water requirement of crops depend on many factors. It depends on the type of crops, irrigation schedules practiced, soil texture, position of groundwater table below effective root zone of the crop and management practice followed in crop cultivation. The pulses, oilseeds, vegetables etc. which are also otherwise termed as dry land crops need less water compared to rice which is a water loving crops and perennial crops like sugarcane, banana etc.

Water requirement of crops is partly met by the upward flux of groundwater. The capillary rise of shallow water table in the form of upward flux helps in meeting the water requirement of crops to some extent. The upward flux depends on the type of the soil, effective root zone depth of the crop, depth of water table below effective root zone depth of the crop and potential gradient of soil moisture suction. If the soil is heavy like clay, effective root zone depth of the crop is more (deep rooted crop) and position of ground water table is near to ground level (shallow water table), then the upward flux is more.

General Definitions

    1.    Colour : Colour is the name for all sensations arising from the activity of the retina of the eye and its nervous mechanisms, this activity being a specific response to radiant energy of certain wavelength and intensities. Colour is basically psychological and is not synonymous with wavelength.

    2.    Lambert’s law : Which states that the proportion of radiant energy absorbed by a substance is independent of the intensity of the incident light.

    3.    Beer’s law : Which states that the proportion light absorbed depends only on the total number of absorbing molecules through which it passes independently of their concentration.

    4.    Extinction : Extinction is the logarithmic ratio of the intensity of the incident light to that of the emergent light.

Introduction

Accumulation of excess soluble salts in the root zone of soils resulting in partial or complete loss of soil productivity is a worldwide phenomenon. The problems of soil salinity are widespread in the arid and semi-arid areas but salt-affected soils also occur extensively in the sub-humid and humid climates particularly in the coastal regions where the ingress of sea water through estuaries and rivers and through ground water movement causes large scale soil and water salinisation. Soil salinity is also a serious problem in areas where ground waters of high salt content are the only source of water available for irrigation. By far the most serious problems of salinity are being faced in the irrigated, arid and semi-arid regions of the world. Our ability to manage salt-affected soils and waters both in the irrigated and in the unirrigated regions will constitute a major effort in meeting potential food requirements. The magnitude of the problem can be appreciated from the following.

INTRODUCTION

India is endowed with a vast and rich diversity of natural resources particularly soil, water, climate and agro-biodiversity. To realize the optimum potential of the agricultural production system on a sustainable basis, there is a need to bestow a paramount importance in the arena of efficient management of natural resources. India with a geographical area of 329 M ha presently supports 17% of the world’s population on merely 2. 5% of world’s land area and 4% of world’s freshwater resources. India’s economy is predominantly agrarian in nature with about 72. 2% of its 1028 million population (census 2001) living in villages and about 54. 4% people (cultivators) directly depending on agriculture.

INTRODUCTION

India has varied agroclimatic conditions, which favour the cultivation of various horticultural crops. Based on the adaptability and system of cultivation, the horticulture can be grouped into four major class such as Temperate, Sub-tropical, Tropical and Arid. India has become the second largest producer of both fruits and vegetables with a total production of 46. 75 million tonnes of fruits from an area of 4. 56 million ha and 93. 16 million tonnes of vegetables from 6. 30 million ha (2003-2004). Besides, there is a tremendous scope for increasing the production of flowers, spices and condiments, plantation crops and medicinal and aromatic plants. Floriculture has emerged as a viable agribusiness. The commercial cultivation of flowers in open field conditions was much popular than protected cultivation in India. But, now- a-days, the protected cultivation has brought a great revolution in Indian floriculture and it helps for the quality production and export to earn sizeable amount of foreign exchange. India has approximately 350 ha under green house cultivation with export value of approximately Rs. 330 crores during 2003-04(APEDA). On the other hand, the prevailing climatic conditions in India are highly suitable for cultivation of the almost all spices from tropical black pepper to temperate saffron. The major spices are mainly grown in humid tropics like Western Ghats and NE States. Out of 21 agro-ecological sub regions in India, spices are grown in 14 different agro ecological sub regions. Fruits, vegetables, flowers spices and condiments, plantation crops and medicinal plants are widely distributed across the country, while plantation crops are restricted to a few regions.

Abstract

The coastal zones are very fragile owing to the reason that these form the junction between the continents and the oceans. Further the multivariate tectonic, fluvial, marine and aeolian processes, which vary independently in their degrees and duration in space and time, act in different permutations and combinations with each other and keep on constructing and destroying the landforms along the coasts. Again, as coastal zones are heavily populated; it adds further pressure on the coastal systems. The paper deals about the hierarchy of issues faced by the coastal zones like tectonic emergence and subsidence and it‘s impacts and the ways, means and needs for measuring the rate of such movements; marine regression and the need for the time series models on the land-ocean boundaries for drawing the sea level curve for India, the Quaternary deltas and the essentiality for understanding the mixture of fluvial and marine forces for the possible future forecasting models; back water modifications, the related issues and the demands for the sediment-chemo dynamics modelling; disaster vulnerabilities and mapping methodologies etc; all using the unexplored vistas of Geomatics technology. The concept has been explained by taking Tamilnadu coast as the reference region.

Introduction

The coastal zones are always fragile as these are formed by the tectonic, fluvial, marine and aeolian processes, which act independently in varying degrees and duration and occur cumulatively in different permutations and combinations along the different parts of the coasts. In addition to such inherent fragility, the coastal zones stand vulnerably exposed to various natural and anthropogenic disasters like seismicity and earth movements, tsunamis, floods, sea level rise, cyclones, coastal erosion etc. Further, owing to the enriched land and water resources, enjoyable eco systems and avenues for intra and intercontinental trades, more than 70% of the global population and the related infrastructure are clustered in the coastal zones. Hence the scientists from all over the world have started showing more attention towards the coastal regions (Ahmed, 1972). The advent of Geomatics technology comprising multi spectral and hyper spectral remote sensing, GIS, GPS, Interferometry, etc. have opened up exhaustive newer vistas in unfurling the hidden complexities of the coastal zones and to provide solutions. From amongst many, the remote sensing based studies carried out by Shailesh Nayak and his team (2004) have brought out many first time information to light about the Indian coasts. But still we will have to go a long way, as the global coasts in general and the Indian coasts in particular are confronted with a hierarchy of challenges and the Geomatics technology can provide answers for these challenging issues owing to its unique virtues. The paper narrates the unique issues of the Indian coasts and how effectively the geomatics technology can be used in solving them. This has been done by taking Tamil Nadu coast as the test area.

Abstract

Drainages have characteristic pattern and life histories with youthful stage in hilly areas, mature stage in plains and old stage in the coastal zones. The deviations from their normal life histories, especially aberrations in their flow pattern in the form of various drainage anomalies have been inferred to be the indications of dominantly the Eustatic and Isostatic changes. This, especially after the advent of Earth Observing Satellites, has attracted the geoscientists from all over the world, for studying such drainage anomalies. In this connection, a study has been undertaken in parts of South India falling south of 14° south latitude to comprehensively map some drainage anomalies like deflected drainages, eyed drainages and compressed meanders and to evolve the tectonic scenario therefrom. The mapping of such mega drainage anomalies and the related lineaments/faults from the satellite digital data and the integration of such lineaments/faults with the overall lineament map of South India showed that the study area is marked by active N–S block faults and NE–SW sinistral and NW–SE dextral strike slip faults. Such an architecture of active tectonic grains indicates that the northerly directed compressive force which has originally drifted the Indian plate towards northerly is still active and deforming the Indian plate.

Introduction

Rivers have characteristic pattern and life histories with (1) short and straight drainages performing only erosion in the hilly catchments, (2) meandering and sinuous paths doing both erosion and deposition in the plains and (3) Brownian pattern of movement doing only dumping of sediments and building up of deltas in the coastal zones. Such characteristic life history of the rivers with youthful stage in the hills, mature stage in the plains and the old stage in the coastal zones in general are controlled by the base level of erosion or Mean Sea Level (Thornbury, 1985). But, the rock types and the geological structures of the terrain related to palaeo, time transgressive and ongoing tectonism too significantly control the drainage pattern and the related river flow dynamics in all these three stages. Hence, geoscientists from all over the world have all along been showing greater interest in understanding the drainage architecture in general and their anomalies in particular. That too, after the advent of Earth Observing Satellite technology, mapping of drainage pattern and their anomalies like dentritic, semi dentritic, trellis, parallel, annular, radial, deflected, pirated, avulted, eyed, compressed, preferentially migrated and other drainage anomalies have gained greater momentum, since, besides lithology, tectonics and sea level changes, these drainage anomalies have the credibility of providing information on the flood histories, seismic vulnerability, past climates and anthropogenic phenomenon too (Chitale, 1970; Chen and Stanley, 1995; Lillesand, 1989; Matmon et al., 1999; Miller, 1937; Reid, 1992; Saintot et al., 1999; Smith et al., 1997; Twidale, 2004; Thornbury, 1985 and many others). In different parts of the Indian sub-continent too, studies have been carried out on the drainage anomalies using topographic sheets, black and white panchromatic aerial photographs and orbital multimode and multispectral satellite data, to elucidate the structural fabric, tectonic processes, climatological and other phenomenon of especially the Quaternary period (Amalkar, 1988; Babu, 1975; Bakliwal and Sharma, 1980; Barooah and Bhattacharya, 1989; Mitra et al., 2005; Murty and Mishra, 1981; Narasimhan, 1990; Oldham et al., 1901; Philip et al., 1989; Rajaguru and Kale, 1985; Ramasamy, 1991, 2006; Ramasamy and Kumanan, 2000; Ramasamy et al., 1987, 1991, 2006; Singh et al., 1996; Sood et al., 1982; Thirunaranan, 1938; Vaidyanadhan, 1971; Yashpal et al., 1980).

In view of fast development of industrial sector and rapid urbanization, the vegetable gardening of various types has great scope for providing food and nutritional security, promoting health, solving employment problem and raising the economic status of an individual and the country as a whole. In many of the developing countries, protein-energy malnutrition is the most important health problem, which has long-term ailing consequences. Iron and vitamin A deficiencies are also potent contributors towards morbidity, mortality, underweight and stunted growth of individuals. Vegetables from homestead gardens can combat these dreaded social nuisances. In many cases, indigenous vegetables, gathered or grown wild, are more nutritious than foreign high value exotic species (Drescher, 1998). Various types of vegetable farming are being practiced the world over depending on the area available and objectives for the disposal of the produce. Based on the mode of disposal, the vegetable gardening can be categorized into two types:

Soil fertility and crop production can be maintained only by efficient and judicious management of nutrients addition to the soil from external sources. Of the two sources most widely used all over the world, one is organic in nature- the organic manures, simply called manures, and the other comprises the synthetic or naturally occurring chemical fertilizers, simply called fertilizers. A brief account of manures is described hereunder:

The word manure came from Middle English manuren meaning to cultivate land, and initially, from French word manoeuvre meaning hand work alluding to the work which involved manuring land. The term manure originally meant that which was worked by hand (Fr. manoeuvre), but gradually, came to apply to any process by which the soil peroperties could be improved. Prominent among such processes was that of directly applying manure to the land, manure in this sense being what is now called farmyard manure or dung, the excreta of farm animals mixed with straw or other litter. Ronald Fisher seems to have used the word manure systematically for what we would call fertilizer today.

Uses of Manure

Manure has been used for centuries as a fertilizer for farming since it is rich in nitrogen and other nutrients, which facilitate growth of the plants. Liquid manure from pig or hog operations is usually knifed (injected) directly into the soil to reduce the unpleasant odours. Manure prepared from hogs and cattle is spread on fields using a manure spreader. Due to the relatively lower level of proteins in grasses, which herbivores eat, cattle manure has a milder smell than the dung of carnivores, e.g., elephant dung is practically odourless. However, due to the quantity of manure applied to fields, odour can be a problem in some agricultural regions. Poultry droppings are harmful to plants when fresh but after a period of composting are valuable fertilizers.

The dried manure of animals has been used as fuel throughout history. Dried manure (usually known as dung) of cow was and still is an important fuel source in countries such as India, while camel dung may be used in treeless regions such as deserts.

The words ‘system’, ‘sub-system’ and ‘practice’ are commonly used in agroforestry literature. In a broad sense, a system is defined as a group of associated elements forming a unified whole and working together in a well defined regular relation for a common goal. An agroforestry system refers to a type of agroforestry land-use that extends over a locality to the extent of forming a land utilization type of the locality. Sub-system and practice are lower-order terms in the hierarchy with lesser magnitudes of role, content and complexity. However, these terms are used loosely, and almost synonymously.

Classification of agroforestry systems is necessary in order to understand and provide a practical framework for evaluating systems and developing action plans for their improvement. Any classification scheme should satisfy the following criteria (Nair, 2008).

1. INTRODUCTION

Micropropagation is a specific aspect of plant tissue culture dealing with the aseptic vegetative multiplication of plants in-vitro and is divided into several major stages:

Stage 0: Stock plant selection and preparation

Stage 1: Initiation and establishment of an aseptic culture

Stage 2: Multiplication

Stage 3: In-vitro rooting and conditioning

Stage 4: Acclimatization to ex-vitro environment. (Hartmann et al., 1990)

1. INTRODUCTION

Vegetables play a significant role in human nutrition, especially as sources of vitamins, minerals, dietary fibre and antioxidants. Consumption of vegetables on a daily basis is highly recommended because of its associated health benefits, which include reduced risk of chronic diseases.

Due to perishable nature of vegetables, the post harvest losses of these commodities are four to five times higher than those of food grains. The post harvest losses from vegetables accounts to a tune of Rs. 23,000 crores per year. Both quantitative and qualitative losses occur in horticultural commodities between harvest and consumption. Qualitative losses, such as palatability, nutritional quality, caloric value and consumer acceptability of fresh produce, are much more difficult to assess than the quantitative losses.

Postharvest losses vary greatly across commodity types, with area and the season of production. In contrast, the range of produce losses in developing countries varies widely. Losses at the retail, food service and consumer levels are estimated at approximately 20 per cent in developed countries and about 10 per cent in developing countries. Overall, about one third of horticultural crops produced are never consumed by humans. Reduction of post-harvest losses can increase food availability to the growing world population, decrease the area needed for production and conserve the natural resources.

The capacity to reproduce is one of the most important characteristics of all living beings. Reproduction is a process of producing offspring and is aimed to preserve individual species. This is known for self-perpetuation. There are several modes of reproduction, which vary from species to species, in available conditions. All the reproductive methods of plants are broadly classified into two types, i.e., (i) asexual reproduction (apomixis) and (ii) sexual reproduction (amphimixis). In asexual reproduction, the new individuals are produced by any means other than the fusion of sex gametes. In sexual reproduction, the gametes from male (androecium) and female organs (gynoecium) of the flower are fused to produce a zygote (Schranz et al., 2005; Rodrigues et al., 2008). Amphmixis and apomixis are the two sides of same coin (Curtis and Grossniklaus, 2007).

Ornamentals are beautiful plants used in home and urban landscaping to enhance quality of our lives. Ornamental crops are widely cultivated worldwide and appreciated for their characteristics and unique appreciable qualities such as attractive color, impressive shape and size of flower and for fragrance of flowers and foliage. Earlier ornamental plants were largely associated with our social life. Of late trends has changed towards commercialization and now they are used for decoration, personal adornment and value added products viz. dry flowers, extraction of essential oils, perfumes and dyes and in landscaping. Further, it helps in creating more job opportunities for youth and women.

The growing demands for quality flowers, introduction of new ornamental plants and diversification needs more attention in ornamental floriculture industry. Novelty is the key to success in ornamental horticulture. Introduction of exotic ornamentals and the domestication and release of new genotypes of wild ornamentals is always welcome in this connection. Some exotic ornamentals hitherto not widely grown in Indian gardens as well as a few native ornamentals with capability to bring in a color revolution and having the potential for exploitation are discussed below.

In sub-tropical agro-climatic conditions of India, a variety of insect-pest, weeds and diseases hamper the economic growth of field crops. For effective control of these pests, a number of pesticides including insecticides, fungicides, herbicides and nematicides are to be applied. Estimation technique for single pesticideonly can not be followed for detection of residues of all categories of pesticides. Hence, this constantly expanding use of pesticides on food crops accentuates the need for rapid, precise and sensitive method for determination of pesticide residues of all the major groups of pesticides. In such situation, multi-residue analytical technique can be efficiently followed for detection and estimation of multiresidues of intra and inter class xenobiotics.

The purpose of multiresidue analysesistodeterminetheresidues ofas manypesticides as possible withina short period of time even if the recoveries of somecompounds are low. In multiresidue methods the recoveries up to 70% are accepted.The recoveriesless than70%have tobe mentionedspecifically. Multiresidue analysis is relativelymore sensitiveand requires extreme vigilance on the part of the analyst during processingof samples. Additionally, instrument, GLC,need to beequipped withcapillary columnsforhigh resolutionand sophisticated detectorslikeECD, NPDand MSD for detectingmulti-residues of the pesticides. Multiresidue analytical methods/techniques havebeen developed for determination of general pesticide residues for some environmental componentsand differentfood commodities.Criteria formulti-pesticides screening as per California Department of Food and Agriculture (CDFA) are:

Abstract

The southern part of the Indian Peninsula has long been regarded as a stable area free from Pleistocene tectonics as it represents the Precambrian shield region. But the frequent earth tremors even up to a magnitude of 6.5 (Richter scale) which occurred in Tamil Nadu have started encouraging the geologists to think that it could possibly be a seismic prone zone. In addition, images acquired by the polar orbiting satellites offered valuable information on the fracture systems and fluvial anomalies suggesting possible Pleistocene tectonism in South India. Hence, a study has been undertaken to evaluate the signatures of Pleistocene tectonism in South India using IRS-lA, LISS-1 FCC imagery (Indian Remote Sensing Satellite lA, Linear Imaging Self Scanning 1, False Colour Composite) involving band 2, 3 and 4 under blue, green and red bands respectively.

The study has brought out a series of E-W trending cymatogenic arches and N-S trending extension, NE-SW trending sinistral, NW-SE trending dextral and E-W trending release fractures with characteristic signatures supporting Pleistocene tectonism in Tamil Nadu and Kerala.

On the basis of such morphotectonic features, a Pleistocene tectonic model has been presented with a N-S trending greatest principal stress and an E-W oriented least principal stress related to the movement of the Indian plate towards the Tibetan plate. Based on the model developed for Tamil Nadu and Kerala, a series of E-W trending cymatogenic arches and deeps have been proposed for Cochin- Rameswaram in the south to the Himalayas in the north. Further studies for seismotectonics, geothermal resources and hydrocarbon search have also been suggested along such arches and deeps.

The muscles of the head (Fig. 2-3 A) are described in four groups viz (1) superficial muscles including the cutaneous muscle. The other muscles in this group of muscles are the muscles of lips, cheeks, nostrils, eyelids and external ear. (2) the orbital muscles (3) the mandibular muscles and (4) the hyoid muscles.

The cutaneous muscle on the head of the ox is well developed and extensive. In most of the regions of the head it is intimately adhered to the skin. The superficial fascia forms a continuous layer beneath the cutaneous muscle in this region except the natural orifices like nostrils, mouth, eyes and the external ear. The deep fascia forms a continuous layer particularly on the temporal, buccal, and the pharyngeal parts of the head. A part of the cutaneous muscle on the frontal region is called the frontalis muscle. The muscle fibres of this muscle blend with the muscles of the eyelids and the contraction of fibres of this muscle causes elevation of the superior eyelid and forms wrinkles to the skin on forehead.

The Indian ancient texts have some mention of the forest and the activities that were performed in the forests. Forests were revered by the people and a large number of religious ceremonies centred on trees and plants. Ancient Hindu culture is said to have evolved in the forest. The epics Ramayana and Mahabharata give an attractive description of forests. The Agni Purana, written about 4000 years ago, stated that man should protect trees to have material gains and religious blessings. Around 2500 years ago, Gautama Buddha preached to his followers to plant trees. There is enough evidence to show that dense forests once covered India. But the growing population and man’s dependence on the forest for infrastructural developments caused the depletion of forests.

HISTORY OF INDIAN FORESTS

The earliest indication of forestry administration in India is found in 300 BC. It was during the reign of Chandragupta Maurya. He realized the importance of the forests and appointed a Superintendent of Forests who looked after forests and wildlife. Later Ashoka continued the process. He launched programmes to plant trees on a large scale. Much importance was also given for planting trees along roadsides and temple premises. These rules continued even during the Gupta period.

Introduction

The increase in agricultural production, particularly food grain is one of the major problems of national planners to achieve the target in the food production. Our farmers have been utilized more and more the modern methods of agriculture including the use of chemicals for protection of crop and stored products against the pests. A successful farmer knows that what pests to expect on his crops and stored products, when and under what conditions their attack will be possible. But due to insufficient knowledge of chemicals and their application, our farmers use them without care and injudicious manner, therefore, these chemicals not only give poor kill of insects but also cause the hazards to man and domestic animals. Success in pest control operations depends on many factors such as correct identification of pest, proper timing of insecticidal application, right choice of chemicals and their formulations, doses and method of application.

Fumigants are still widely used for the control of insects and other pest organisms. Because of their unique characteristics and the great adaptability of fumigation technique, fumigants can often provide effective and economical control where other forms of pest control are not feasible. The development of light weight plastic sheets to enclose spaces or materials requiring fumigation has extended its use and made control procedures easier and much more adaptable. Among the fumigants, aluminum phosphide, ethylene dibromide (EDB), Ethylene dibromide- carbon tetrachloride (EDCT) etc. are most common in tropical and sub-tropical while methyl bromide is prevalent in temperate regions. Modern technology and research have also brought to notice certain problems with fumigants that are previously unknown. Among these, adverse effects on seed quality are most important. Thus, fumigants used in seed stores should not affect the viability of the seeds, should not be persistent, non-corrosive and highly diffusible.

The produced food grains have to be stored either for short or long duration for utilization in the coming times for food, feed and seed. In storage, these undergo 9.33 per cent losses due to various agencies such as rodents, insects and mites, microorganism and moisture in India, whereas, in other developing countries, the losses are as high as 30 to 50 per cent. Therefore, with an urge to produce more, there is still urgent need to protect the produce in the storage to meet the challenge. As a result of improved storage technology, the losses in Government Warehouses could be reduced to minimum but at farmers’ level, where 60-70 per cent of the produce is retained, the losses are still too high.

The management of insects in stored products is in transition from a dependence on regular applications of chemical insecticides to the use of integrated pest management (IPM). IPM involves understanding interactions between stored product environment and insects associated with stored products, and replacing all or most of the chemical applications with cost effective non chemical alternatives. The increased emphasis in adopting IPM strategies for stored product insects is primarily due to consumers’ demand for food free from pesticide residues. The transition from a heavy reliance on chemicals to little or no chemical input and increased use of non chemical approaches requires a thorough understanding of stored product insects, their identification, monitoring, biology, ecology and response to chemical and non chemical management options. The current scenario of stored grain protection in India depends totally and judicious use of IPM strategies. For safe storage of food grains, both the preventive and curative measures are required:

Introduction

Plant genetic resources management essentially consists of two phases; its conservation and utilization. Germplasm conservation includes acquisition, in which germplasm is safeguarded in situ (by establishing reserves) or ex situ (by assembling collections through exchange or exploration). It also involves maintenance, protecting germplasm in situ in reserves or storing it ex situ under controlled conditions, propagating it while preserving its original genetic profile with maximum fidelity, monitoring its viability and health in storage or in situ and maintaining associated passport information and other data. Germplasm conservation also involves characterization, assessing highly heritable morphological and molecular traits for taxonomic, genetic, quality assurance and other management purposes. The second phase of germplasm management, encouraging utilization, includes evaluation, assessing agronomically or horticulturally important traits with relatively low heritability and high components of environmental variance e.g. yield adaptation and host-plant resistance to certain abiotic/biotic stress. It also includes genetic enhancement, making particular genes more accessible and usable to breeders by adopting exotic germplasm to local environments without losing its essential exotic genetic profile and/or introgressing high value traits from exotic germplasm into adapted varieties. Genetic enhancement can be subdivided into introgression i.e. backcrossing a few genes controlling desired characters into adapted stocks and incorporation i.e. the large scale development of locally adapted populations good enough to enter the adapted genetic bases of the crops concerned.

Introduction

Spices have played a very important role in shaping the history of human culture and civilization. Spices condiments and aromatic plants were the first articles traded by ancient people. These prompted the foreigners to the land of spices. Among spices, seed spices is a group well distributed over different agro-climatic regions in India covering major part in semi-arid to arid region largely in Rajasthan and Gujarat. The other states where one or more of seed spices grown are Haryana, Punjab, M.P., Bihar, U.P., West Bengal, Orissa, Tamil Nadu and Karnataka. The seed spices are grown in different parts of the world covering mainly Mediterranean region, South Europe and Asia. These crops were introduced to India from Mediterranean and Central Asian region, perhaps a long time ago. Today India enjoys the position of largest producer and exporter in the world for these crops. The country is bestowed with immensely rich land races diversity in seed spices crops. Much of the country’s agro-biodiversity is in the custody of farming community who followed age old farming systems. However the land races are being lost due to expansion of agriculture production in the frontier areas or replacement with the improved cultivars. Hence, scientific management of these valuable resources on different dimensions of activities in India viz. survey and collection, characterization, evaluation, documentation and conservation has assumed prime importance today. Out of the total 20 seed spices grown in India the ten are prominent. These important seed spices are divided into major and minor group of seed spices. The crops covered as major seed spices are coriander, cumin, fennel and fenugreek, whereas, ajowan, dill, nigella, celery and anise constitute minor group. The semi-arid to arid region is considerably rich in plant biodiversity of seed spices and it is required to conserve the natural wealth of these crops. The increasing loss of plant diversity owing to numerous natural and manmade causes calls for immediate efforts for its collection and safeguard.

Introduction

The crops, its significance along with its classification has got paramount importance in agricultural heritage. A crop is a plant or animal product that can be grown and harvested in an area with a target to earn profit or achieve subsistence. Crop may refer either to the harvested parts or to the harvest in a more refined state (husked, shelled, etc.). Most crops are cultivated in agriculture or aquaculture.

A crop is usually expanded to include macroscopic fungus (e.g. mushrooms), or alga (alga-culture) at the point of origination. Most crops are harvested as food for humans or livestock (fodder crops) or to get raw materials for agro-based industry. Some crops are gathered from the wild collection (including intensive gathering). The important non-food crops include horticulture, floriculture and industrial crops. Horticulture crops include plants used for other crops (e.g. fruit trees, grown single or in orchard). Floriculture crops include blanket plants, houseplants, flowering garden and pot plants, cut cultivated greens, and cut flowers. Industrial crops are produced for clothing (fiber crops), bio-fuel (energy crops, algae fuel), or medicine (medicinal plants).

Microbes (fungi, bacteria or viruses) are rarely referred to as crops. Animals raised for human or animal consumption are referred to as livestock and microbes as microbiological cultures. Microbes are not typically grown for food itself, but are rather used to alter food (e.g., for production of citric acid, fermenting yogurt, soya sauce and so on). The importance of a crop varies greatly by region. Crop production depends on the availability of arable land and is affected in particular by yields, macroeconomic uncertainty, as well as consumption patterns; it also has a great incidence on agricultural commodities’ prices. The importance of crop production is related to harvested areas, returns per hectare (yields) and quantities produced. Crop yields stands for harvested production per unit of harvested area for the particular crop i.e. products. In most of the cases yield data are not recorded, but are obtained by dividing the production data by the data on area harvested. The actual yield that is captured on farm depends on several factors such as the crop’s genetic potential, the amount of sunlight, water and nutrients absorbed by the crop, the presence of weeds and pests infestation. These indicators are presented for wheat, maize, rice and soybean. Crop production is measured in tons per hectare, in thousand hectares and thousand tons.

Introduction

India has one of the best agricultural research systems in the world with better amount man-power amongst the developing countries. The research system includes more than 30,000 scientists along with 1,00,000 subordinate personnel actively engaged in research system in the country involved to agricultural research which considered to be second highest next to China. The achievement and success looks very much impressive and at par with all the developed nations of the world.

National Agricultural System

India has one of the largest agricultural research systems in the world with the largest number of scientific personnel of any developing country except China. The research system includes approximately 30,000 scientists and more than 100,000 supporting staff actively engaged in research related to agriculture. Although the total number of scientists engaged in agricultural research in India looks very impressive, it compares less favorably with many developed countries.

The present agricultural research system comprises essentially two main streams, the ICAR at the national level and the Agricultural Universities at the State level. Besides, several other agencies such as General Universities, Scientific Organizations, and various Ministries/Departments at the Centre, as also Private or Voluntary Organizations participate directly or indirectly in research activities related to agriculture.