eChapters

Introduction
Food Chains
Food chains are made up of organisms that eat and are devoured by one another as a means of transferring energy from the source in plants. “The transfer of energy from plants through a series of organisms with repeated eating and being eaten” is one definition of it.
A food chain is the movement of energy from producers at one trophic level to consumers at the next. In a food chain, energy moves only in one direction. An understanding of food chains can provide important insights into how ecosystems work.
• Grazing food chain
Grazing food chains and detritus food chains are the two main categories of food chains.
The food chain known as grazing begins with living green plants, moves through grazing herbivores, and ends with carnivores. Such a food chain places an immediate demand on ecosystems for solar radiation. From an energy perspective, these chains are very significant.

Introduction
The lives of the local population are disrupted by large-scale projects such as dam construction, mining, highway construction, or the designation of a national park, and they are frequently forced to relocate to a new location. Relocating individuals is a significant challenge as it diminishes their capacity to survive solely on their customary natural resource base and intensifies psychological strain. 33 to 56 million people have been displaced by 54 projects in India over the past 50 years.
Resettlement and Rehabilitation of People
Major projects like dams, mines, expressways, and other industrialization-related projects, as well as some conservation strategies like the creation of national parks, can cause disruptions to people’s lives and force them to relocate to an alternate location. Relocating individuals from their birthplace is a grave concern as it diminishes their capacity to survive only on their customary natural resource base, so adding to their psychological strain. It is difficult for the displaced individuals to adjust to a new lifestyle in a new location. Due to the indirect effects of the Green Revolution—the building of thousands of dams since India’s independence—thousands of people havebeen displaced. These impoverished locals have essentially paid for the construction of the dams. Even if the government has set enough time to relocate these displaced individuals and offer them a sufficient package for rehabilitation, this rarely happens.

Government initiatives are pivotal in advancing natural feed management and sustainable livestock practices across India. As natural and organic farming gain recognition for their environmental benefits, numerous national and state programs are supporting farmers in decreasing their reliance on synthetic inputs, particularly commercial livestock feed. Flagship schemes such as Paramparagat Krishi Vikas Yojana (PKVY) and Bharatiya Prakritik Krishi Paddhati (BPKP) promote integrated, low-input farming systems by offering financial aid, farmer training, and implementation through cluster-based models. These schemes often incorporate livestock integration and development of natural feed resources.
Departments under the Ministry of Agriculture and Farmers Welfare, the Department of Animal Husbandry & Dairying (DAHD), and ICAR institutions actively encourage fodder production, feed preservation, and development of indigenous feed mixtures through research, on-ground trials, and skill-building programs. For instance, the National Livestock Mission (NLM) aids in fodder seed distribution, establishment of silage facilities, and training on scientifically sound yet natural feeding techniques. Institutions like Krishi Vigyan Kendras (KVKs) and State Agricultural Universities (SAUs) contribute through extension services, field demonstrations, and technical advice on formulating natural feed, utilizing medicinal plants, and conserving feed on-farm.
In recent developments, the government has promoted Farmer Producer Organizations (FPOs) and Self-Help Groups (SHGs) to facilitate collective feed processing, shared resource use, and marketing of value-added products like organic milk and free-range poultry. Similarly, the Rashtriya Gokul Mission supports the improvement and conservation of native cattle breeds better suited for natural feeding systems.

Ducks serve as natural or “biological” aerators in integrated farming systems. In India, they are typically raised in inexpensive shelters constructed on the pond embankments. Ducks contribute to aquaculture not only by splashing water with their webbed feet—thus enhancing aeration—but also by controlling aquatic weeds, insects, mollusks, and tadpoles. Their droppings act as organic manure, significantly boosting the pond’s primary productivity. For achieving a targeted production level of over 3,500 kg/ha, a combination of six fish species—Catla (20%), Silver carp (20%), Rohu (20%), Mrigal (15%), Grass carp (10%), and Common carp (15%)—should be stocked at a density of 8,000 to 8,500 fingerlings/ha. This integrated model is suitable for grow-out and stocking ponds where fish are above 12 grams in weight (Figure). The adoption of integrated fish-and-duck farming can significantly boost fish yields in both seasonal and perennial ponds—from an average of 200–500 kg/ ha to 1,000–4,000 kg/ha. For example, this system achieved a fish production of

INTRODUCTION
The fuel system in a tractor engine is essential for providing the engine with the right amount of fuel to enable efficient combustion. Its primary function is to guarantee a steady and reliable flow of clean, properly atomized fuel, which is crucial for achieving optimal performance and fuel efficiency. The system consists of various components that collaborate to manage different processes such as storing, filtering, and delivering the fuel to the combustion chamber.
These processes must work in harmony to ensure the engine operates smoothly, maintaining both power output and efficiency. Proper atomization of the fuel ensures that it mixes well with air, allowing for more complete combustion and minimizing the chances of fuel wastage or emission of harmful substances. From fuel storage tanks to injectors, every part of the fuel system is designed to meet the demands of the engine under various operating conditions.
A well-functioning fuel system helps maintain engine longevity, reduces fuel consumption, and ensures that the engine can perform at its best across different workloads and environments.
Fuel is a substance consumed by the engine to produce power. The common fuel for Internal Combustion engines are
1. Petrol
2. Power kerosene
3. High speed diesel
Calorific value of fuel
The heat liberated by combustion of a fuel is known as calorific value or heat value of the fuel. It is expressed in kcal/kg of the fuel

Choosing the appropriate construction materials requires evaluating their properties, cost, availability, and how well they suit the particular project. Common materials include concrete, steel, bricks, wood, stone, glass, and various plastics. Key specifications often considered are strength, durability, fire resistance, and environmental impact.
MATERIALS OF CONSTRUCTION FOR TRADITIONAL GREENHOUSE
Traditional greenhouses are built using a variety of materials that ensure durability, insulation, and protection for plants, while also allowing sunlight to penetrate. The selection of materials depends on factors such as cost, climate, and the greenhouse’s intended purpose. Here are some of the common materials used in constructing traditional greenhouses:
1. Wood: Wood has been a traditional and widely used material in greenhouse construction due to its affordability and ease of use. Treated wood, such as cedar or redwood, is commonly chosen for its resistance to decay and insects. Wood offers good insulation and stability, making it suitable for different climates.
2. Galvanized Steel: Steel frames provide exceptional structural support and are known for their strength and durability. Galvanized steel is coated to prevent rust and corrosion, extending its lifespan. Steel frames are capable of withstanding heavy loads and harsh weather conditions.
3. Aluminum: Aluminum frames are lightweight and resistant to corrosion, making them a favored choice for greenhouse construction. They are easy to assemble and require little maintenance over time.
4. PVC Pipes: PVC (polyvinyl chloride) pipes are cost-effective and simple to work with, making them ideal for smaller or temporary greenhouses. They provide a basic, lightweight framework that is easy to assemble.

A drop inlet spillway is a hydraulic structure designed for soil and water conservation, particularly effective in areas with significant elevation changes such as gullies and ravines. It safely conveys excess water from reservoirs, embankments, or other structures to downstream channels, thereby preventing overtopping, erosion, and structural damage. The spillway consists of three main components: an inlet, a vertical conduit, and an outlet. Water enters through the inlet, drops vertically through the conduit, and then flows horizontally into a downstream channel via an outlet. This design is especially suitable for controlling gully heads and stabilizing gully beds. Typically, drop inlet spillways are constructed at fixed intervals across the gully width to form a series of control points. These structures help to dissipate flow energy, reduce erosion, and promote sediment deposition, gradually filling the gully section. Although effective, their use is generally limited to vertical drops of up to 3 meters. Drop inlet spillways play a crucial role in reducing land degradation and enhancing water management in erosion-prone areas.
COMPONENTS OF A DROP INLET SPILLWAY
A drop inlet spillway is composed of several key components that work together to safely and efficiently convey excess water while minimizing erosion and structural damage. The primary components include:
• Inlet Structure: This is the entry point where water enters the spillway. It can have various configurations, including circular or rectangular box-type flat crests or the more commonly known funnel-shaped morning glory crest.
• Vertical Shaft: A central conduit that allows water to drop vertically from the inlet down to the outlet level, utilizing gravitational force to convey flow.
• Outlet Conduit: A horizontal or inclined pipe or tunnel that transports water from the base of the vertical shaft to the downstream channe

Cost estimation is a critical step in the planning and implementation of conservation structures, providing a foundation for project approval, budgeting, and economic evaluation. For drop spillways—hydraulic structures used in soil and water conservation—the process involves calculating all expenses associated with materials, labor, and ancillary charges.
Drop spillways are engineered to safely transport excess runoff from higher elevations to lower ground levels, preventing erosion and structural degradation. Commonly used in agricultural watersheds, these structures play a vital role in controlling gully erosion, managing stormwater, and maintaining land productivity.
Accurate cost estimation includes:
• Quantifying construction materials such as concrete, masonry, reinforcement bars, and pipe outlets.
• Calculating labor costs based on the skilled and unskilled labor required for excavation, form, and structural assembly.
• Adding overhead charges, including land revenue, administrative costs, and potential audit expenses.
A detailed cost estimate ensures that the project remains within budget while meeting safety, durability, and environmental standards. It also aids in comparing alternatives and securing funding or approvals from governing agencies.
COMPONENTS OF A DROP SPILLWAY
Estimating the cost of different conservation structures involves analyzing both material and labor expenses specific to each type of structure. This process plays a vital role in project approval and economic assessment. It includes calculating material quantities, labor charges, and additional costs such as audit fees and land revenue.

Population expansion, climate change, diminished rainfall, and escalating food demand are adversely affecting agriculture, resulting in alterations to crop practices. Consequently, to enhance yields and obtain precise data, it is imperative to implement modern precision farming techniques and deploy diverse sensor technologies.
• In light of the current circumstances and their adverse effects on conventional farming methods, agriculture must be conducted more wisely, employing advanced and cutting-edge technologies. This is the sole method to deliver a solution and address the incessant and expanding demands of the global population.
• Precision agriculture sensors are highly effective in agriculture as they relay data that enables farmers to monitor, enhance their goods, and stay informed about changes in the field and ecosystem.
• Advanced agricultural sensors efficiently identify animals, detect estrus, and monitor health, so enabling the isolation and treatment of ill cows through the identification, detection, and tracking of herds.
• Farmers can now utilize smart sensors in agriculture to monitor their crops remotely, assess their efficacy, manage pest infestations, and promptly implement measures to safeguard their crops from environmental threats.
• A sensor is a device that detects and reacts to specific inputs such as light, movement, pressure, temperature, or humidity, converting them into representations or signals that can be interpreted by people for further analysis and processing.
• They are frequently utilized in many applications, ranging from motion detection in security systems to temperature measurement in HVAC systems. They are also utilized in commonplace items such as smartphones, automobiles, and appliances.

The extensive integration of drone technology in agriculture is swiftly revolutionizing farming practices, providing substantial enhancements in efficiency, precision, and sustainability. Drones provide farmers a cost-efficient and effective method for crop monitoring, resource management, and yield optimization. Drones facilitate high-resolution imagery acquisition, real-time crop health monitoring, and precise application of fertilizers or pesticides, empowering farmers to make data-driven decisions that improve productivity. As technology becomes increasingly accessible, particularly in developing regions, its usage is steadily rising. Agriculturalists are progressively recognizing the capacity of drones to decrease labor expenses, mitigate resource wastage, and improve environmental sustainability, establishing them as a crucial instrument in the future of agriculture.
CHALLENGES AND OPPORTUNITIES FOR THE WIDESPREAD ADOPTION OF DRONE TECHNOLOGY IN AGRICULTURE
The extensive integration of drone technology in agriculture offers both obstacles and prospects. Comprehending these factors can influence the future of agriculture and realize its complete potential. Drone technology is being integrated into Indian agriculture; yet, obstacles to wider implementation persist. Challenges
• Significant Initial Expense: The initial capital required for acquiring drones, along with essential sensors and software, can be excessive, particularly for small-scale agricultural producers. The expenses associated with training and upkeep exacerbate the financial strain, hindering certain farmers from embracing the technology.
• Technical Skills and Training: Proficient operation of drones necessitates a specific degree of technical acumen. Agriculturalists must acquire the skills

INTRODUCTION
The process of preparing vegetable-based products involves several essential steps, such as cleaning, chopping, cooking, and adding seasoning. Initially, vegetables are thoroughly washed to eliminate dirt and chemicals. Depending on the specific product, vegetables are then either peeled or chopped. Some vegetables undergo blanching to maintain their color and texture before they are frozen or subjected to additional processing. For products like vegetable soups, stews, or purees, the vegetables are simmered in water or broth to enhance their flavors.
The preparation process is supported by a range of equipment, including blenders for pureeing, steamers for gentle cooking, and slicers to ensure uniform cuts. Pressure cookers are used to speed up cooking times for items like stews, while dehydrators are employed to produce vegetable chips or dried snacks. Grinders and mills are used to create pastes or powders from vegetables. It is crucial that all equipment is handled carefully to ensure it operates effectively and safely, which is necessary for achieving the highest product quality. Regular maintenance of the equipment is vital for achieving consistent and reliable results.
VALUE ADDITION CONCEPT
Value addition is a strategic approach in post-harvest management aimed at enhancing the quality, market value, and economic potential of agricultural products such as fruits and vegetables. This process focuses on transforming raw produce into value-added products that are more desirable and useful for consumers and markets. It plays a critical role in modern agriculture, food processing, and marketing. Let’s take a closer look at the concept of value addition in post-harvest management:
• Product Diversification: Value addition involves creating a variety of products from raw fruits and vegetables. For example, fresh fruits can be turned into juices

The valorization of agri-biomass and organic waste is governed by a mix of regulations, standards, and policies aimed at promoting resource efficiency, reducing environmental impact, and fostering sustainable development. These measures include national and international initiatives, sector-specific laws, and economic instruments designed to incentivize waste management and promote the utilization of byproducts for energy, materials, and other applications. The valorization of agri-biomass and organic waste into biofuels, bio-based chemicals, bioenergy, and other value-added products is increasingly being recognized as a critical pillar of sustainable development, circular economy, and climate action. In India, the regulatory and policy framework surrounding this sector has evolved significantly in recent years, reflecting growing governmental interest in managing agricultural residues, reducing pollution, promoting renewable energy, and incentivizing green industries. A wide range of ministries—such as the Ministry of New and Renewable Energy (MNRE), Ministry of Environment, Forest and Climate Change (MoEFCC), Ministry of Agriculture and Farmers Welfare (MoA&FW), and Ministry of Petroleum and Natural Gas (MoPNG)—as well as regulatory bodies like Central Pollution Control Board (CPCB) and Bureau of Indian Standards (BIS) play pivotal roles in formulating and enforcing the relevant policies, regulations, and technical standards. One of the flagship policies in this domain is the National Policy on Biofuels (2018, revised 2022), which provides a roadmap for blending biofuels such as ethanol, biodiesel, and compressed biogas (CBG) with conventional fuels. It promotes the use of second-generation (2G) feedstocks like agricultural residues, municipal solid waste, and non-edible oilseeds for biofuel production. Under this policy, the government supports financial incentives, viability gap funding, R&D investments, and market linkages to boost bio-refinery infrastructure. This is supplemented by the SATAT (Sustainable Alternative Towards Affordable Transportation) initiative, launched by MoPNG, which aims to establish 5,000 CBG plants across India using agri-residues, cattle dung, and organic waste, thereby encouraging decentralized waste valorization.

This chapter introduces the historical development and fundamental concepts of immunology. It highlights the contributions of Edward Jenner, Louis Pasteur, Elie Metchnikoff, Paul Ehrlich, Emil von Behring and other pioneering scientists. Important discoveries related to vaccination, phagocytosis, antibody formation, cellular immunity, ELISA, radioimmunoassay and hybridoma technology are addressed. The chapter also explains antigens, immunogens, epitopes, haptens, adjuvants and the desirable characteristics of an effective immunogen. Questions concerning smallpox and rinderpest eradication, vaccine development and primary and secondary immune responses help readers understand the scientific milestones that established immunology as an essential discipline within veterinary and biomedical sciences.

This chapter examines cytokines as essential signalling molecules that regulate immune and inflammatory responses. It introduces interleukins, interferons, chemokines, tumour necrosis factors and colony-stimulating factors. Their sources, target cells and biological actions are considered in relation to immune-cell activation, differentiation, migration and communication. The chapter explains important properties such as pleiotropy, redundancy, synergy and antagonism. It also covers antiviral activity, chemotaxis, inflammation, fever and the regulation of humoral and cell-mediated immunity. Special attention is given to excessive cytokine production, cytokine storms and septic shock. These questions help readers understand how cytokines coordinate protective immunity and contribute to immune-mediated disease.

Onion is highly vulnerable to weed competition because of its slow early growth, shallow roots, narrow upright leaves and limited canopy development. Weeds compete for light, water, nutrients and space while also harbouring pests and pathogens. Severe infestation during the critical competition period can cause substantial yield reduction. This chapter describes major onion weeds and evaluates cultural, physical, mechanical, biological and chemical control methods. Timely planting, suitable spacing, mulching, raised beds, manual weeding, mechanical tools, herbicides and biological agents are discussed. Integrated Weed Management is recommended as a smart approach combining complementary methods to improve weed control, protect soil health and sustain onion productivity.

India is a leading producer and exporter of onion, but its productivity, market stability and post-harvest efficiency remain constrained. Farmers face fragmented holdings, climate uncertainty, price fluctuations, inadequate storage, technological gaps and significant post-harvest losses. This chapter reviews government programmes and policies related to financial support, irrigation, infrastructure, crop insurance, market access, farmer organizations, storage, processing and agricultural research. It also discusses export-quality requirements, grading, packaging and pesticide-residue standards. Research priorities include stress-resistant varieties and hybrids, drip irrigation, fertigation, growth regulation, sprout control and non-thermal storage treatments. Coordinated policies and technological dissemination can improve farmer income, productivity, quality and market resilience.

Human Development and Family Studies has been prepared to strengthen conceptual understanding and examination readiness among students of community science and related disciplines. The book presents objective questions covering lifespan development, developmental challenges, early childhood care and education, guidance and counselling, marriage and family dynamics. Answer keys enable learners to assess their knowledge and identify areas requiring further study. A theoretical section provides a concise outline of important topics, supporting systematic revision and classroom instruction. The book is intended for undergraduate and postgraduate students, teachers and candidates preparing for university and competitive examinations in human development, family studies and early childhood education.

This chapter focuses on the ergonomic design of tools, machines and equipment used in occupational and domestic activities. It examines the human–tool interface and explains why equipment must reflect users’ anthropometric dimensions, biomechanics, cognitive capabilities and sensory requirements. Important design considerations include handle dimensions, grip comfort, wrist position, operating force, weight, balance, vibration and feedback. Adjustable features and alternative equipment sizes are presented as methods for accommodating user diversity. Examples from industrial, agricultural and domestic work show how ergonomic improvements can reduce fatigue, musculoskeletal strain and operational errors. The chapter also considers lightweight materials, mechanical assistance, automation and other technological innovations that improve safety and efficiency.

The quality of irrigation water has a direct influence on soil properties, crop growth and the long-term sustainability of irrigated agriculture. Water containing excessive salts or undesirable proportions of specific ions can create salinity, sodicity and other soil-related problems. This chapter presents the major criteria used for evaluating irrigation water quality. Salinity hazard is considered as an important indicator of the potential for salt accumulation in the soil and consequent restrictions on plant water uptake. Sodium hazard is examined because excessive sodium can adversely affect soil structure and permeability. The chapter also considers the salt index as a measure relevant to the evaluation of irrigation water. Bicarbonate hazard is discussed in relation to the chemical behaviour of irrigation water and its potential effects on soil conditions. Magnesium hazard is another important consideration in assessing the suitability of water for irrigation. By bringing these criteria together, the chapter provides a framework for evaluating irrigation water before application. Proper assessment of water quality is essential for selecting appropriate management practices and preventing long-term degradation of irrigated soils.

The soil–plant–water relationship integrates the major concepts of soil-water availability, root water uptake and plant transpiration into a unified system. Water movement through the soil and plant is governed by differences in water potential and by resistance within the water-conducting pathway. This chapter examines water uptake by roots and the process of transpiration, emphasizing the continuous movement of water from soil through the plant and ultimately to the atmosphere. Variations in water potential and water flux within the soil–plant system provide the basis for understanding how water is transported under different environmental and soil conditions. The resistance of the water-conducting system is considered as an important factor controlling water movement. The chapter separately discusses water movement through soil and within plants before connecting these processes with water movement from the leaf surface to the atmosphere. Control of transpiration is also examined, linking plant water relations with environmental conditions and crop water use. The chapter provides an integrated framework for understanding soil–plant–water interactions essential for efficient irrigation, crop productivity and sustainable management of water resources.

In climatology, terms “Weather” and “Climate” have different connotations. Weather refers to the state of atmosphere at any given time denoting the short- term variations of atmosphere in terms of temperature, pressure, wind, moisture, cloudiness, precipitation and visibility. Weather is highly variable. It is constantly changing, sometimes from hour to hour and at other times from day to day. The aforementioned properties of the atmosphere are subject to constant change and their state at any time determines the state of the weather. However, weather elements are not separate rather they are closely related with each other.

David I. Blumenstock, an eminent climatologist has defined the weather in more restrictive sense. According to him, weather is the behaviour of the lower atmosphere with particular emphasis on the atmospheric behaviour which affect the lands and oceans and have a marked influence on the organisms that live upon the lands, within the waters of the earth or in the lower air. For the geographer, this definition of weather is more satisfactory. Since, he is interested more in the working of the lower atmosphere which affects the life of man as well as natural environment directly. Thus, we come across a great many varieties of weather covering a wide range of conditions.

The change of state of water from solid and liquid to the vapour and its diffusion into the atmosphere is referred as Evaporation. In the meteorology, evaporation is defined as the maximum possible loss of moisture from a wet, horizontal, flat surface exposed to weather which exist in the vicinity of plants.

FACTORS AFFECTING EVAPORATION

1. Those affecting water supply at the evaporating surface. i.e., soil and plants including soil storage capacity, rainfall and irrigation and

2. Those affecting energy supply to the evaporating surface like solar radiation.

Plant growth is resultant of all the environmental factors – climatic, physiographic, edaphic and biotic factors.

For a particular field – it is primarily a function of climate with temperature and light – being the most important factors. – Close relationship exists between plant phenology and both latitude and altitude.

Variation in field crops between years is associated with many factors. This is mainly due to weather, soil and management factors. There is complex reaction of weather variables among themselves as well as with other factors. Therefore, many attempts were made to study the effect of weather variable on crop yield through simulation modeling.

Crop yield is influenced by genetical (heredity), external (environmental) and management factors that occur during the crop growing period. The external environment is the climate which regulates and determines the growth and development and final output of crop plants. But, man has no control over weather, hence it is dominance over the success or failure of agricultural enterprises. According to the World Meteorological Organization, the weather induced variability in crop yield is as high as 50 per cent. Therefore, weather should be taken as one of the inputs in agricultural planning.

The communication system provides the forecaster with a large mass of figures; the next step is to put them into a suitable form for study. This is done by plotting the observations on a large outline map which in popular term is called a “Weather map” technically a “Synoptic chart” simplified synoptic charts appear in some newspaper.

A chart or map on which meteorological data presented and analysed is called a synoptic chart. Synoptic means having the same view point. The representation of the meteorological data in synoptic chart are atmospheric wind, temperature, pressure, cloud, precipitation, dew point etc., over a long area at a given local standard times.

1.1 DEFINITIONS
1. Forest
Forest is the homeland of trees. Because man must protect and maintain the life of the forest and because of this;  certain natural
calamities  and  bad  use  of  the  forest  constitute  severe danger to  the forest  and the  environment at large.  In  other to divert from these difficulties, man was bound to cultivate trees. This is silviculture. Silviculture then became a science and art.

This group includes a large number of bony fishes in which the primary upper and lower jaws are supplemented by the addition of membrane bones which forms secondary jaws. Hence they are called as teleostomi or perfect mouthed fishes.

All major groups of fresh water fishes lived successfully and flourished during the Devonian period which is also called as the “Age of fishes”. Teleostomii are characterized by a unique mechanism of opening the mouth by lowering the mandible through hyoid apparatus, therefore the skull is hyostylic or the amphistylic. Presence of an ossified operculum, an interhyal bone and the branchiostegal rays are the diagnostic features of this group.

In order to obtain maximum yield of fish from a lake or reservoir, it is essential to culture fast growing compatible species of different feeding habits is called as composite fish culture.

Any one kind of species cannot utilize the variety of food available in the pond. For a complete utilization of cheap natural food, pond fishes of different age groups or of different species may be selected for stocking. A combination of several compatible species with complementary food habits would make better use of the food resources of the pond as well as ecological potentials of the pond.

When fishes of different age groups and different species are cultured in same pond called as composite fish farming or mixed farming or polyculture. This is based on the principle that compatible species do not harm each other instead they utilize in the most efficient manner, all available food supply of the pond for maximum production of fish yield. There is no competition between different species on the other land they may be beneficial effect on the growth of others.

Fishes are used by human beings in different forms from time immemorial millions of human beings suffer due to hunger and malnutrition and fishes from a rich source of food, which has following importance:

1) Fish is an excellent food for mankind is more easily perishable than cattle, sheep and chicken.

2) Fish flesh is easily digestible by child and man.

3) Fish flesh has very great nutritive and medicinal values.

4) Fish flesh contains proteins, bass, vitamins, waters and minerals.

5) All the essential required amino acids are present in the fish flesh.

6) Fish flesh contains proteins about 13-20 % and it is easily digestible and nutritional.

7) Fish flesh is highly perishable commodity constituted as 60-80 % water.

8) Fish flesh contains about 1-8 % fats or oils and it is more important value of fishes.

Fish are of great economic value for man. In addition to it is an important item of food and provides several important by – products also which are as :

1) Fish oil

The most important fish by product industry is fish oil which acts as a vehicle for fat soluble vitamins i.e. A, D, E and K, and source of essential faty acids.

The oil of fish is categorized into two main types as the fish liver oil and fish body oil.

The oil abstained from the whole body of fish is called as body oil and is poor in vitamin contents.

The oil abstained from the only liver of the fish is called as the liver oil, and is good quantity of vitamins.

The body oil is less valuable as compared to the liver of the fish.

The per capita consumption of fish has been 3.2kg on an average up to 1992 as against estimated requirement of 11.0 kg pisciculture has the potentiality of popularity. Fish is rightly considered as the “Poor man’s diet”. It is almost zero carbohydrate food, good for diabetics and other such patients. Fish is a rich source of protein, vitamins and minerals. A special feature of fish flesh food is content of vitamin B12, which is almost absent in plant food and also a good source of calcium and vitamin A. Fish also contains polyunsaturated fatty acids which are known to provide protection against cardio-vascular diseases. This has got advantages over the other meat food.

Planktophagus fishes have higher protein contents then do fish with other feeding habits.

When flesh of fish is put to an analysis the following major components are observed.

The concept of Exclusive Economic Zone, popularly called as EEZ was born out of a conflict on fishing rights among coastal nations. Some nations found their waters being exploited by foreign countries equipped with better and more powerful fishing gear and craft more sophisticated navigational and fish detection systems than their own. In 1950 several such nations unilaterally established fishing limits in their coastal waters for exclusive fishing. In the beginning the limit was just twelve mile. Again in 1970 some more countries are added and then they unilaterally accepted the limit of 200 nautical miles.

The United Nations General Assembly convened during 1974-1982 conferences on the Third law of the sea. The United Nations convention on the law of the sea (UNCLOS) was the outcum of the deliberations after it was ratified by as many as 60 countries in 1994. According to the UNCLOS each coastal country shall have an EEZ of 200 nautical mile zone around the share with exclusive right to exploitation of marine resources. The UNCLOS also imposed certain responsibilities on them. Each Country shall have a duty to properly manage its resources. The resources not being fully tapped by a country other countries shall legally have the right to exploit such waters by use of trawlers. It was also stated that beyond the EEZ, the fisheries of the high seas shall be regulated by the Regional Fisheries Organizations. Thus straddling fish and migratory fish fisheries become the subject of not the coastal states but of the regional fisheries organizations. This agreement was reached in 1992 at the Rio-de-Janerio United Nations conference on Environment and Development (UNCED) which worked under the frame work of the UNCLOS. About 90% of the marine catch is taken in the EEZ many countries including India have yet to realize their full potential from their EEZ. A few countries have not accepted EEZ restriction like South Africa. A number of countries on other hand are almost optimally exploiting their EEZ such countries are New Zealand, Iceland and Canada. The EEZ is a common shared area among member countries of European common market (BCM)

Though India is one of the major fish producing countries in the world, it has no history regarding technical and academic training in fisheries. India has to tackle simultaneously the long range problem of establishing a regular fisheries educational system as one of its fisheries policies for ensuring a reserve of large number trained persons. The short range problem of providing specialized training to the large number of in service personal, who were not basically qualified in all aspect of fisheries had been planned. Therefore, the government of India and the state Governments had put in considerable effort to solve problem of shortage of technical person as by organizing a number of fisheries training institutions in the country at different levels. A few universities are also providing training in fisheries leading to degrees in fisheries.

The following are the main fisheries training institutions which are giving special training in fisheries in India:

A detailed treatment on the concepts of mutagenic effectiveness and efficiency was given by Konzak et al. (1965). They proposed the term “effectiveness” as a measure of gene mutations in relation to the dose and “efficiency” as an estimate of the mutation rate in relation to other biological effects induced, such as lethality, injury or sterility. To obtain high efficiency, the mutagenic effect must greatly surpass other effects in the cell, such as chromosomal aberrations, and toxic effects which generally lead to damage

Germination between M₁ and M₂ had a non-significant relationship in germination between M₁ and its corresponding M₁ progenies in M₂ (Table 27). Probably the reduction in the germination in M₁ might be very highly and significantly influenced by the conditions prevailing in germination and physiological disturbances that would be strictly associated in M₁ alone. Whereas the survival of the seedlings between M₁ and M₂ showed a strong positive relationship. The differential behaviour of the mutagens affecting germination and survival was also evident as discussed elsewhere.

However, seedling height on 10^th day sorted a differential relationship between M₁ and M₂. It was negative and non-significant. A non-significant relationship was exhibited for seedling height on 30^th day between M₁ and M₂ in all the doses. It may be interpreted that extent of physiological disturbances that occurred in the early stages and the extend of recovery mechanism that operated subsequently may be the major cause for this; not withstanding the haplontic and diplontic selection that operated in the biological system. Further the type of physiological disturbances happened, whether the enzyme systems affected or a substantial amount of toxic substances produced besides the genetical causes have not been studied in the present investigation. Moreover if the reduced growth was due to mitotic arrest in the meristamatic regions of the roots of M₁ plants, the disorder may not be completely inherited to its offspring’s (M₂ plants), in that sense selection at the cell level damages might occur in the M₁ itself and the selection for a cell with normal mitosis and extent of chromosomal damages that will be tolerated alone might be selected and hence the effect in M₁ need not be always related with M₂; it also depends upon the potency of the cell to recover from the mutagen induced damages. The ability of the cell in general, should be more in M₁ than in M₂ recover the disorder after several cell generations.

Polygenic characters exhibit a wide range of expression but the action of genes may be either additive or non-additive. According to Fisher et al. (1932), Smith (1936) Lush (1945), Panse (1946) and Mather (1949) the genetic advance can be achieved through selection of the heritable variation in only due to additive. So, selection for a particular character based on phenotypic variability without estimating the heritable part of it will not be successful. Heritability estimates along with genetic advance are normally more helpful in predicting the gain under selection than heritability estimates alone (Singh, 1997). Therefore, the heritability enters into every formula connected with breeding methods and many practical decisions are taken considering the heritability value.

The frequency distribution of the populations of M₂ and M₃ generation for each genotype was extracted according to Panse and Sukhatme (1961). Skewness and Kurtosis for all the characters were calculated as per the standard method. Skewness refers to the symmetry of the frequency distribution. A measure of skewness is obtained as making use of the second and their moments about the mean. It is defined as,

Wettable powder (WP): An insecticide formulation consisting of finely ground solid particles of active ingredient plus inert carrier; forms a suspension when added to water.

Waggle dance: A communication dance of honey bees. A form of recruitment in the honey bee in which direction and distance to a food source are indicated.

Waiting period: See time interval.

Waiting period: The prescribed period between last application of a pesticide to crop and harvest.

Warble: The swelling on the host body caused by the larva of a warble fly.

Warm-blooded (Homoiothermous): Animals in which body temperature normally does not change with changes in atmospheric temperature e.g.birds and mammals.

Warning: Signal word used to designate a moderately toxic pesticide; oral LD₅₀ = 50 to 500 mg/kg body formulated.

Kelvin scale: The thermodynamic temperature scale in the SI and is named after Lord Kelvin (1824-1907). The temperature unit on this scale is the Kelvin, which is designated by K (not °K; the degree symbol was officially dropped from Kelvin in 1967). The lowest temperature on the Kelvin scale is 0 K.

Kelvin unit: magnitude was established at the International Conference on Weights and Measures in 1954. The triple point of water (the state at which all three phases of water exist in equilibrium) was assigned the value 273.16°K (0.01 °C). The magnitude of a Kelvin is defined as 1/273.16 of the temperature interval between absolute zero and the triple-point temperature of water. The magnitudes of temperature units on the Kelvin and Celsius scales are identical (1 K, 1°C). The temperatures on these two scales differ by a constant 273.16.

Like many other beautiful plants, Bougainvillea has been chosen as the symbol of a host of countries, regions and municipalities. It is the National Flower of the Caribbean Nation of Granada and the United States territory of Guam. It is also the official flower of several counties in Taiwan and Malaysia. In the United States, Bougainvillea is the floral symbol of three California cities (Camarillo, Laguna Niguel and San Clemente). Bougainvillea spectabilis: Paper Flower; Common name: Bougainvillea; Scientific name: Bougainvillea spp.; Hindi: Baganvilas (Booganbel); Manipuri : Cherei; Bengali : Baganbilash; Marathi: Bougainvillea (Booganvel); Konkani: Bouganvila; Telegu: Bogam Malle (Kagithala Puvvu); Malaysia: Bunga kertas, buganvil, buginvila;  Indonesia: kembang kertas; China: Ye Zi Hua; Spain: Bouganvilla, Aka Buganvilla; Mexico and Philippines: Bugambilia; Honduras: Napoleon; Colombia, Nicaragua, El Salvador, Costa Rica and Panama: Veranera; Colombia, Cuba, Panama, Puerto Rico, Dominican Republic and Venezuela: Trinitaria; Argentina, Bolivia, Brazil, Paraguay and Uruguay: Santa Rita; Northern Peru: Papelillo.

Bougainvillea is relatively pest-free. Worms, aphids, and moths might be an issue. Sometimes it gets attacked by spiders which can be controlled by using miticide and by the fungus Phytophthora which is checked by spraying Blitox (copper oxychloride) (Sharma 1996, Banerji 2010). Although it is normally pest-free plants, but may suffer from worms, snails and aphids. The larvae of some Lepidoptera species also use them as food plants, for example the giant leopard moth (Hypercompe scribonia). Leaf spot disease caused by Cercosporidium bougainvillea has been reported in the U.S.A. (Sobers and Martinez 1966, Sobers and Seymour 1969). When compared to B. spectabilis, B. glabra has been reported to be resistant or only slightly susceptible to the leaf spot disease (Pal and Swarup 1974). Cercosporidium bougainvillea has been reported in Colombo by Pardo-Cardona (1998) and in Indonesia by Kobayashi and Oniki (1994). The disease can be controlled by spraying copper Carbendazim at the rate of 1 g/l at an interval of 10-15 days. Fusarium wilt caused by Fusarium oxysporum in bougainvillea has been reported in Italy (Polizzi et al., 2010). Bacterial leaf spot caused by Pseudomonas andropogonis has been reported in Brunei, Darussalam (Peregrine and Ahmad 1982, Sivapalan and Hamdan 1997) and U.S.A. (Walker 1991, Walker and Hodge 1991). This can be controlled by spraying copper oxychloride at the rate of 3 g/l at intervals of 10-15 days.

New varieties of bougainvillea have been developed in India at different research institutions, nurseries, botanical societies and also by individual efforts. Details have been mentioned above. New varieties developed at CSIR-NBRI need special mention. 

CSIR-NBRI has developed a number of new varieties by using various available breeding tools viz. through spontaneous mutation, classical breeding, chromosome manipulation and induced mutation (Banerji 2007, 2008, Banerji and Datta 1986, 1988, 1993, 1996, Banerji et al., 1987, Data and Banerji 1990, 1994a,b, Datta 1992b, 2004, Nath et al., 1983, Ohri 1995, Sharma 1996, Zadoo et al., 1975b, Jayanti et al., 2007, Roy et al., 2015).

Selection is an important tool for changing gene frequencies to better fit individuals for a particular purpose. It may be defined as a process in which certain individuals in a population are preferred to others for the production of the next generation. Selection is of two kinds

An animal breeder usually interested in various economic traits and when wishes to improve them in the herd/flock, he has three general methods at his disposal. Tandom method, independent culling level method and  index selection method.

Tandom Method

It involves selection for one trait at a time and until it reaches at a satisfactory level, and then for a third trait etc. This method is applicable only when the different traits in question are entirely independent or positively genetically associated to each other. Its effectiveness decreases with the increase in number of traits. This method is least desirable of all the methods.

General Selection Procedures for Dairy Breeds
Selection of Dairy Cows
Selecting a calf in calf show, a cow in cattle show by judging is an art. A dairy farmer should build up his own herd by breeding his own herd. Following guidelines will beuseful for selection of a diary cow. Whenever an animal is purchased from cattle fair, it should be selected based upon its breed characters and milk producing.
History sheet or pedigree sheet which are generally maintained in organized farmsreveals the complete history of animal.The maximum yield by dairy cows are noticed during the first five lactations. So generally selection should be carried out during First or Second lactation and thattoo are month after calving.?Three successive complete milkings has to be done and an average of it will givea fair idea regarding production by a particular animal.
A cow should allow anybody to milk, and should be docile.?It is better to purchase the animals during the months of October and November.?Maximum yield is noticed till 90 days after calving.

Selection of Site and Land Preparation

Cashew is a hardy plant; it thrives well on wide range of soil. While selecting the land for cashew, soils with water logging and excessive salinity of alkalinity should be avoided. Otherwise, soil depth, slope, stoniness, soil fertility and water availability seem to impose very little limitation. For establishing new plantations, land preparation should begin with the first pre-monsoon rains. The area should be cleared of bushes and other wild growth before digging pits for planting.

Planting Season

Planting of soft wood grafts is usually done at the beginning of monsoon season (June-July). Therefore, land preparation such as clearing of bushes and other wild growth, digging of pits for planting, should be done during pre monsoon season (April-May).

Intercropping

Canopy of cashew to cover the entire area in about 8 to 10 years when grown under normal spacing of 8m x 8m in fertile soil. However, in marginal lands, it takes 10 to 12 years for the canopy to cover entire area. Cashew when grown in hilly regions there is a possibility of soil erosion and weed growth during initial years of planting (Yadukumar and Nayak, 2000). Intercropping is the only available best options to prevent such erosions and conserve soil and moisture in hilly areas and to obtain sustainable income.

Recently, establishment of large plantations and adoption of systematic package of practices and intercropping is practiced to realize additional income in the initial years of cashew cultivations. When the cashew canopy starts touching the neighbouring trees possibility of intercropping is ruled out. Mixed cropping with other tree species is not widely accepted and even not advisable (Anon., 1997), though there are a few instances of growing casuarina as mixed crop in Andhra Pradesh and Orissa states (Yadukumar and Nayak, 2000).

Introduction

Once the cashew fruits fallen, are collected, the nuts are to be separated from the cashew apple and sun dried for 2 to 3 days. This is very important in view of the quality of kernels obtained during subsequent processing. Raw nuts at the time of harvest will have moisture content ranging between 16 to 25 per cent; while sun dried nuts have moisture content of 8 to 10 per cent (Nagaraja, 2000). If the nuts are not dried and stored properly, it leads to fungal spoilage resulting in poor quality of kernels. Fungi such as Gonatobotryum, Helminthosporium sp., Corynespora sp., Alteraaria sp., Verticillium sp. and many species of Aspergillus have been isolated from stored cashew nuts (Joseph, 1981). In view of the occurrence of fungi, drying of the raw nuts before storage becomes absolutely essential. Maximum permissible moisture content of raw cashew nuts is 8.7 to 9.1% (Ohler, 1979). Okwelogu and Mackay (1969) have reported that high whole nut or kernel moisture percentages are closely associated with high shell moisture contents and for nuts whose moisture content is in equilibrium with the ambient relative humidity, the moisture content of whole nut and kernel could be predicted from that of shell with more than 99% accuracy. A higher kernel shell weight ratio has been shown to be inversely proportional to moisture content.