eChapters

Introduction

India is bestowed with wide range of climate and physic-geographical conditions and as such is most suitable for growing various kinds of horticultural crops such as fruits, vegetables, flowers, nuts, spices and plantation crops (coconut, cashewnut and cocoa). Its horticulture production has increased significantly over the last two decades and as per the final estimates, by 2013-14, it has increased to about three times (2.87) since 1991-92 and to about twice (1.90) compared to the production in 2001-02. This has placed India among the foremost countries in horticulture production, just next to China. As per National Horticulture Database 2014, during 2013-14, India’s contribution in the world production of fruits & vegetables was 13.6% & 14%, respectively. Total production of fruits during 2013-14 was about 89 million tonnes while that of vegetables was 163 million tonnes.

Introduction

India is gifted with varied agro-climatic conditions for growing an array of vegetable crops to combat the present ill-balanced diet. The brinjal belongs to the family Solanaceous and to the genus Solanum, species melongena. The egg plant, Guinea squash are some synonyms to brinjal. It is a hardy crop and does best in worm and moist climate. The crop is generally grown twice or thrice in a year. The edible part, fruit is of high nutritive value and can well be compared with tomatoes. Insect pest constitute the major limiting factors in the successful production of brinjal. Pest comples of brinjal is very high and aphid (Aphis gossypii) causes heavy damage to the crop. Aphis gossypii (Hemiptera: Aphididae) is a tiny insect or greenfly in the superfamily Aphidoidea in the order Hemiptera. It is a true bug and sucks sap from plants. It is a widely distributed pest of a variety of agricultural crops in the families Cucurbitaceae, Rutaceae and Malvaceae.

Introduction

Stress in physics is any force applied to an object. Stress in biology is any change in environmental conditions that might reduce or adversely change a plant’s growth or development. ‘Stress’ or ‘pressure’ was introduced into the theory of elasticity as an amount of force for a given unit area. When sufficient force is applied to material, the material bends and the change in length is termed ‘strain’. With increasing stress, the initially linear relationship between stress and strain becomes nonlinear until the proportionality limit, after which the material deforms elastically (it can bend back), then plastically (it cannot bend back) until it ruptures. Since the 1930s, biologists have attempted to apply this terminology to biological systems, albeit the nature of the stresses will vary between nonliving materials and organisms.

1    General post mortem examination and detection of date and time of death

2    Pathogenomonic lesions of different diseases

3    Livestock insurance

4    Pet-dog insurance

Ideas, materials, facilities, processes and labourare clubbed together to produce a worthwhile product-milksuccessfully and this may be the art and science of management. In otherwords, weput togethertheinputs-soil, labour, hay, fertility, silage into milk and such transformations are the result of a purposeful and pre-meditated action-management and not just by happenstance.

Decisionmaking role of dairy farm manager Manager of dairy farm decides :

• What to do !

• How to do !

• When to do !

For answeringtheabove, themanager mustplan to co-ordinate, organize, control and direct his supportive staff. For accomplishing his targets, the manager must gatherinformation about allresources available, applicationof newtechnologies, different options of market outlets and sources of capital credit needed. He should be able to establish targets to be achieved. Obstacles or ‘stumbling blocks’ are always there which hinder progress towards goals. Therefore, these have tobe identified.He shouldbe abletocomparealternative optionsof realizing targets, consideringtheeach one in terms of income potential, thecapital needed, the labour required. Then choosing the best plan of action and put that option into operation. The manager should be able to assume responsibility for the consequences of actions taken. Later, he should evaluate and measure results. His accomplishments maybe assessed in the light of standards of performance. Notonlythat, but alsoto keep a vigil on production level, labour efficiency, cost, investments etc. He must keep the operating system flexible so that he may take advantage of new developments to be applicable in his plans.

Introduction

Billions of chemical reactions are happening inside human body and that too with lightning speed. However, the same reactions if carried out in laboratory, they take a very long time. The reasons behind it are the biocatalysts, also known as enzymes, which are synthesized by living cells. Chemically, they are proteins(except ribonucleic acids: RNA), colloidal in nature, thermo-labile in character and very specific in their action. For example, hydrolysis of proteins by a strong acid at 100°C takes a couple of days; but same proteins can be digested within couple of hours inside human body at 37°C. Similarly, carbonic anhydrase is used as a catalyst by living cells to transfer carbon-di-oxide from cells to blood. This process is 107 times quicker than the same process if occurs without the help of enzymes. Therefore, enzymes can be defined as the biomolecules or biocatalysts which can speed up the rate of the chemical reactions. The substance upon which an enzyme acts is called as substrate and the one which is produced as the result of enzyme-substrate reaction is known as product.

ABSTRACT

In India agroforestry practices are ancient but the story of organized agroforestry research began in 1979 at Imphal. Considerable efforts have been expended towards promoting and implementing agroforestry practices in the country by establishing centers for agroforestry research in almost all agro-climatic zones. Though almost 30 years has passed since systematic research started however, adoption of agroforestry is still in patches. This is because of myths attached with integrating trees with crops, market condition, rules regarding timber movements, allelopathy, long duration and so on. This paper examines the various arguments for and against agroforestry practices in India and presents the opportunity and challenges in adopting agroforestry as a sustainable land use practice.

INTRODUCTION

In India the green revolution led to increase in production through enhanced productivity. Unfortunately the population growth is increasing at a rapid rate and there is an urgent need to accelerate agricultural growth to address issues on food security, nutrition adequacy, rural income generation, employment and poverty. Despite higher production, the per capita availability of food over time has not increased significantly. About 70 to 80 per cent of our people depend on agriculture for their livelihood. Contribution of agriculture to GDP is declining; this affects the rural poor most. The urban – rural divide and regional disparities are on the increase. To achieve a desirable rate of 7 per cent growth in the economy, agriculture must register a growth not less then 4 per cent. Now it is around 2 per cent and is declining (Singh, 2002). These continuous improvements in productivity are essentials but these must be capable of being maintained in perpetuity. In other words, an evergreen revolution rooted in the principles of ecology, economics, social and gender equity, energy conservation, employment generation and social auditing, is essential in major farming systems of India. Land, water and vegetation care constitute the foundation for building up such an evergreen revolution movement.

What is Nanotechnology? Answers differ depending on who you ask, and their background. Broadly speaking however, nanotechnology is the act of purposefully manipulating matter at the atomic scale, otherwise known as the “nanoscale.” Coined as “nano-technology” in a 1974 paper by Norio Taniguchi at the University of Tokyo, and encompassing a multitude of rapidly emerging technologies, based upon the scaling down of existing technologies to the next level of precision and miniaturization. Taniguchi approached nanotechnology from the ‘top-down’ standpoint, from the viewpoint of a precision engineer.

Foresight Nanotech Institute Founder K. Eric Drexler introduced the term “nanotechnology” to the world in 1986, using it to describe a ‘bottom-up’ approach. Drexler approaches nanotechnology from the point-of-view of a physicist, and defines the term as “large-scale mechano synthesis based on positional control of chemically reactive molecules.” In the future,“ nanotechnology” will likely include building machines and mechanisms with nanoscale dimensions, referred to these days as Molecular Nanotechnology (MNT).

Plant secondary metabolism produces products that aid in the growth and development of plants but are not required for the plant to survive. Secondary metabolism facilitates the primary metabolism in plants. This primary metabolism consists of chemical reactions that allow the plant to live. In order for the plants to stay healthy, secondary metabolism plays a pinnacle role in keeping all the of plants’systems working properly. A common role of secondary metabolites in plants is defense mechanisms. They are used to fight off herbivores, pests, and pathogens. Although researchers know that this trait is common in many plants it is still difficult to determine the precise role each secondary metabolite. Secondary metabolites are used in anti-feeding activity, toxicity or acting as precursors to physical defense systems.

6.1 Introduction

The change in climatic factors over the years is affecting the entire ecosystem. According to Intergovernmental Panel on Climate Change (2007), the global surface temperature is predicted to increase between 1.4 and 5.8 ^oC by the year 2100. Microbial and plant metabolic processes are often dependent on environmental factors (for e.g. temperature and moisture), enzyme activity, and nutrient availability all of which are likely to be affected by climate change (IPCC, 2007). The global atmospheric concentration of carbon dioxide, an important greenhouse gas (GHG) largely responsible for global warming, has increased from a pre-industrial value of about 280 ppm to 389 ppm at present. Similarly, the global atmospheric concentration of other important GHGs like methane and nitrous oxides has also increased considerably. The increase in GHGs was 70% between 1970 and 2004.

Rising atmospheric CO₂ is able to change the physiological activities of plants and soil micro organisms which in turn control the flow of carbon (C) and nitrogen (N) in terrestrial ecosystems. The change in climatic factors also alters the beneficial plant-microbe interactions, which may be positive, negative, neutral or having variable effects. The survival and activity of microorganisms in the rhizosphere mainly depend on the flow of carbon in the root exudates. The composition of these root exudates is affected by various environmental factors such as soil type, pH, light intensity, oxygen status, soil temperature, soil moisture and nutrient availability. Diverse microbial activities pose a major challenge to predict the response of microbial community to global climate change. These changes in microbial activity have larger impacts on vital ecological processes such as nutrient cycling.

8.1 Introduction

Earth’s temperature has increased significantly due to the rise in concentration of greenhouse gases in its atmosphere. Naturally occurring greenhouse gases include water vapour (H₂O), carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O) and ozone (O₃). Prior to industrial revolution, the amount of greenhouse gases released into the atmosphere matched what could be absorbed by the natural sinks. Industrialization catapulted the addition of anthropogenically emitted gases to the environment, much beyond the natural levels. These greenhouse gases are building up, thus creating the effect of ‘global warming’. Global warming is a consequence of two major phenomena - depletion of the ozone layer and increase in greenhouse gas emission (Ishler, 2008).

Introduction

India is the largest consumer and second largest producer of sugar in the world next to Brazil. Among the sugar yielding crops like sugarcane, sugar beet, palms and sorghum, sugarcane is the second most important agro-industrial crop of the country. It is the only raw material for nearly 538 sugar mills (2014-15), producing about 28 million mt of sugar annually from a sugarcane production of 366 million tons in an area of 5.307 mh. Apart from this, it is the predominant source of potable alcohol, industrial alcohol and fuel-ethanol. In India, 35 million farmers are engaged in sugarcane cultivation and another 50 million depend on employment generated by these 538 sugar factories and other related industries using sugar. Sugarcane occupies a very prominent position in the agricultural crops of India covering large areas in UP, Punjab, Haryana and Bihar (sub tropical) and Maharashtra, Karnataka, Gujarat and Tamil Nadu (tropical). On an average, white sugar production accounts for 74% of total cane produced, 14-15% is utilized for jaggery and khandsari production and the rest is utilized for other purposes including seed.

Jaggery and khandsari, the traditional Indian sweeteners are the natural mixture of sugar and molasses. If pure clarified sugarcane juice is boiled, what is left as solid is jaggery, which contains 65-85% sucrose. Khandsari sugar is a finely granulated and crystallized which contains 94 to 98% sucrose. In the early 1930’s, nearly 2/3rd of sugarcane production was utilized to manufacture these two alternate sweeteners. With the introduction of sugar mills and their multiple growth and better standard of living and higher per capita income, the demand for sweetener has shifted to white sugar which contains purely sucrose (99.7%).

Introduction

Fish is a source of valuable animal protein and is considered a health food. This has resulted in increased consumer demand. Fish is now more expensive than meat and other animal foods. Being a highly perishable commodity, fish require immediate processing and various options are available for the value addition of fish. Fish processing, particularly seafood processing and marketing have become highly complex and competitive and exporters are trying to process more value added products to increase their profitability. Value can be added to fish and fishery products according to the requirements of different markets. These products range from live fish and shellfish to ready to serve convenience products. In general, value added food products are raw or pre-processed commodities whose value has been increased through the addition of ingredients or processes that make them more attractive to the buyer and/or more readily usable by the consumer.

Plants have played an important role in many mythologies and religions of the world and have been known for deep and sacred meanings throughout the ages. It is the symbolic representation of the old cultural traditions in the form of a tree across the world. Christmas tree in the Christianity and Bodhi tree in Buddhism are the example of tree featured in mythology. In most of the folklore, folktales and folk religion trees are often said to be homes of tree sprits. If history is traced, we will found that Druidism and Germanic paganism appear to have involved in religious conservational practices of sacred groves. Druidism is a nature based religion that was taught by Druids about 2000 years ago. The term druid itself possibly derives from the religeous word for oak. Therefore, the Druidism reconnects us with nature, our ancesters and ourselves by working with plants or trees.

Trees are honored in Indian culture for their different beneficial characters like medicinal properties, food, fodder, maintaining hydrological cycle, moderate the climate etc. There are some trees that have attained more than a special benevolence in Hindu mythology. In Indian mythology number of plants have been given sacred value and worshipped by different cultures. Some important plants of sacred value have been discussed here.

8.1 Introduction

Interferometric or phase modulated sensors have received special attention because these are much more sensitive than intensity modulated sensors and can be used over a much larger dynamic range. The sensors rely on the interferometric technique. Generally, the sensor employs a coherent light source such as a laser and two single mode optical fibers. Light is split and coupled into both the fibers. If the measurand perturbs the optical properties of one of the fibers relative to the other, a phase shift occurs. The change in phase can be measured very precisely. For the measurement a sophisticated electronic processing equipment is needed. Thus the interferometric sensors are expensive compare to intensity modulated sensors. There are four kinds of interferometer configurations: Mach-Zehnder, Michelson, Fabry-Perot and Sagnac interferometers. The Mach-Zehnder, Michelson and Sagnac interferometers are the two beam interferometers while in the case of Fabry-Perot interferometer multiple beam interference occurs. In this chapter we shall first describe interference phenomenon and then different kinds of fiber optic interferometers. In the end we shall describe a number of sensors based on interference phenomenon or phase modulation.

Introduction

Pulse production in India has fluctuated widely with no long-term trend, leading to a steady decline in per capita availability per day, i.e. from 60.7 grams to 33.40 grams during 1951 to 2001, while its average requirement is about 65 gram per day per head. The pulses used to serve a low cost food to meet the protein requirement of a large sector of people in India. But, the pulses are becoming out of reach for the common people of country because of its continuing shoring prices. A Technology Mission on Pulse production was launched by Government of India in 1986-87 as a special drive to increase the pulse production in the country. The vision of Technology Mission of Pulse is attaining self reliance in pulses for household nutritional security and sustainability of the production system. The mission statement was to increase Pulse production from existing (IX plan) 131.4 lakh tonnes to 162 lakh tonnes; Productivity from 594 kg/ha to 702 kg/ha and per capita availability of pulses from 35 g to 40 g per day at affordable price. Unfortunately, the country has not been able to achieve self-sufficiency in the pulse production. During the last 40 years, the acreage under pulse crops and its production remained almost between 21-24 million hectares and 10-15 million tonnes, respectively. Consequently, the country has had to depend on import of pulses every year to meet the part of its shortage. The National Commission of Agriculture had estimated that the country should plan to produce about 25 million tonnes of pulses by the end of 2000, but we could achieve only about 14 million tonnes. Presently, the area and the production of pulse crops account for about 18.50 and 7.20 per cent (2003-04) of total area under foodgrains and total food grains production in the country, respectively.

Introduction

Research and development (R&D) is one of the main components to tackle the problems persisting or likely to take place in future. Priority areas of research are depending upon the overall situation and requirements of the problem under consideration. Under these broad areas, topic of interest for research may be varying at different geographical level from household to nation or global. If it is addressing vast geographical area like states, nations, regions and/or global, there may be many individuals/groups/institutions are working over similar type of problems. With the growing communication facilities and rising fund requirements, collaborative research programmes emerged to provide effective and economic solution to the problem with respect to time, money and manpower etc. Earlier, it was limited to high priority areas like defense and long run planning of the nations or kingdom at nation or state level. Declining environmental conditions and biological diversity became global concern in seventh decade of twentieth century. To tackle this problem, The United Nations Conference on the Human Environment (Stockholm) resolved to establish the United Nations Environment Programme (UNEP) in 1972. Further, to speed up the progress, global community through world leaders had identified two burning priority areas during conference United Nations (U N) Environmental Programme Rio de Janeiro, Brazil in 1992, well known as Earth Summit. One of those two priority areas was Biological Diversity. To address the issues at global levels, The Convention on Biological Diversity was signed by party nations, which was later ratified by the 187 countries. India is also one of the signatory nations and need to fulfill some time bound commitments. Moreover, later, importance of biodiversity and germplasm has been underlined by different forum at regional and global level for its present and future values in the life of human kind. Countries and various geographical regions are now becoming more and more aware about its judicious exploitation, conservation and sustained higher output over period of time.

Abstract

In the present horticultural scenario of India, this is the burning issue as how best the underutilized horticultural crops can be exploited. There is tremendous potential for these crops especially for diversification. These plants can generate employment for millions especially to the natives ofdeveloping counties besides nutritional security. Traditional wisdom of Indian farmers if used properly can pave the path for transforming the economy of developing nations. There are great opportunities for the people to identify crops, explore their market, standardize their cultivation and processing techniques, document them and provide jobs to millions. This will salvage the people from exploitation by multinational companies of developed nations and can give a new direction to sustainable agriculture.

1.    Yoghurt usually contains total milk solids in the range of

(a) 12-15%

(b) 8.5 to 11.5%

(c) 15-19%

(d) 20-25 %

2.    Yoghurt is usually manufactured by heating the pre-mix to pasteurize it to

(a) 61-62°C for 20 minutes

(b) 80-85°C for 15 to 30 minutes

(c) 80-85°C for 15 sec

(d) 71-72°C for 15 sec

1.1. IMPORTANCE OF FOOD MICROBIOLOGY

Food may be defined as substances that provide nutrients, which when eaten and absorbed by the body, maintain life and growth. Food is basically energy stored in plant and animal foods in chemical form. On consumption, the stored form gets converted to physiological energy. Food is the prime necessity of life. Man has exhibited much thought and foresight in cultivating a variety of grains, fruits, vegetables, nuts and oilseeds and in rearing birds and animals for use as food.

Of the three primary needs of an individual, food, clothing and shelter, ‘food’ occupies the most important place. The biodiversity of foods- cereals, millets, pulses, oilseeds, spices, fruits and vegetables is varied and high in India, where we have varied agro-climatic regions from Kashmir to Kanyakumari. All the fifteen major climates in the world exist in India. India is the second largest producer of food in the world. The impact of green revolution is remarkable in India with many fold increased food production in the last five decades. The full potential of Indian agriculture can not be realized unless India emerges as a major player in the World agriculture.

World population is set to go beyond nine billion by 2050 and demand for food is likely to increase further because of growing affluence and globalization. Food security is achieved when all people have physical and economic access to sufficient, safe and nutritious value added food. India is emerging as a food power in the international trade of foods. The food processing industry in India has been identified as one of thrust areas for the development of the country. It has emerged as a highly perspective sector with immense potential in food processing. The future of Indian food processing industries is bright, provided it improves its quality of products as per international standards.The quality of food processing refers to the adherence of physical, chemical, biological, nutritional and sensory parameters required to achieve the wholesomeness of a food product. Quality control has become an important aspect for food processing industry for both domestic and export markets.

4.1 Introduction

A huge amount of waste in the form of liquid and solid is produced in the fruit and vegetable processing industry which causes pollution problem if not utilized or disposed off properly. Generally solid waste is dumped in local landfills, eaten and scattered by stray animals, which has now become a major cause of environmental pollution. The waste obtained from fruit processing industry is extremely diverse due to the use of wide variety of fruits and vegetables, the broad range of processes and the multiplicity of the product [79]. The solid waste from fruits and vegetables includes peel, stone, rag, seed, core etc is of economic value and can be used for manufacturing of various by-products [21]. The extent of the waste produced from processing industries of some of the important fruits and vegetables, is given in Table 1.

In India, utilization of fruits and vegetables for processing is hardly 1.8% of the total production. There were 5166 processing units till 1^st Jan, 2009 of fruits and vegetables products throughout the country. About 90% of these units are small scale units with annual production limit of 50-250 tonnes. These units have no organized methods of waste disposal. In certain places this waste is taken away by farmers for their disposal as cattle feed or field manure.

Key words : NRSA, Natural Resource and Disaster Management, Agricultural Drought, Ecosystems, Biodiversity Information System, Water Resources, Sea Surface Temperature.

Introduction

A few decades ago, paper maps were the principal means to synthesize and represent geographic information. Manipulating this information was limited to a manual, non-interactive process. Since then the rapid development of new technologies to collect and digitize geographic data, together with an increasing demand for both interactive manipulation and analysis of this data, has generated a need for dedicated software’s namely geographic information systems (GISs).

A GIS is more than a cartographic tool to produce maps. It stores geographic data, retrieves and combines this data to create new representations of geographic space, provides tools for spatial analysis, and performs simulations to help expert users to organize their work in many areas like public administration, transportation networks, military applications and environmental information systems. These above mentioned are few among many others where we are concerned with geographical locations, their present status, its potential for developmental activities, patterns of change over the years and the processes on the surface of the earth.

Geographic information technology is used to manipulate objects in geographic space, and to acquire knowledge from spatial facts. Spatial information theory provides a basis for GIS by bringing together fields that deal with spatial reasoning, the representation of space, and human understanding of space.

Over the past 12,000 years Homo sapiens have moved from the hunter–gatherer life-style to settled agriculture to advanced civilization in urban society with improved quality of life. Livestock has played an important role as an instrument of bringing out this change. Farmers all over the world, attach great importance to livestock ownership as a source of nutrition, as a mechanism for capital accumulation, and concomitantly, as a symbol of wealth and status in the community. Just as in today’s society, money is used to exchange goods and services, livestock including goats used to play the same role in times gone by. Most farmers consider livestock as a important resource for income generation. Livestock sector plays a significant role in supplementing family income and generating gainful employment in the rural sector, particularly among the landless, marginal and small farmers and women, besides providing cheap nutritional food to millions of people. History indicates that livestock has been not only a resource, but also an instrument of dominance and a source of conflict in the society. Livestock especially small ruminants have often served as a means for exchange of goods and services and thus becoming increasingly important in the growth of agriculture in developing economies.

Livestock species which man domesticated for improving the quality of human life include goat, sheep, cattle, buffalo, pig, poultry, horses and camels. Among these goats were the first among livestock species domesticated by man. Goats are among the smallest domesticated ruminants and have served mankind longer than cattle or sheep. Goat is an important source of meat, milk, skin, fiber and manure since then. Traditionally goats have been an important source of income generation among small households. Goats have been used to buy salt, cloth and groceries in many communities. Goats provide a large part of the cash income for smallholder farmers. Goats are friendly animals; with proper attention they maintain good health and can be managed easily even by children.

Sailors and other explorers out on the high seas kept goats as a ready stock of meat & milk on long voyages. Captain Cook’s goat had already sailed around the world before it entered on its first voyage with Cook, and helped save everyone on board the ship from scurvy. Goats are some times kept as pet or companion animal. Their use as pet is common in European countries especially U.K. Some owners keep goats for purpose of goat shows.

A Overview

Genetics is a branch of biology concerned with heredity and variation.

Genes are the unit of inheritance and are composed of DNA.

The effects of genes are noticeable at the molecular, cellular, family, and population levels.

Genes are DNA sequences that instruct cells to produce particular proteins, which in turn determine traits.

Genes can exist in more than one form and the variants of a gene arise by mutation.

An allele is a variant of a gene that alters its expression in a detectable way. Alleles can be dominant or recessive.

A polymorphism is a particular sequence of DNA that varies in one percent or more of the population.

Single nucleotide polymorphisms are single base pair sites that differ among individuals.

Chromosomes consist of genes and associated proteins.

The human genome consists of 22 pairs of autosomes and one pair of sex chromosomes.

A karyotype is the photographic catalog of the human chromosomes.

Specialized cells and tissues arise by differentiation from the stem cells of the early embryo.

Pedigree diagrams enable recessive and dominant traits to be followed through multiple generations of a family.

A gene pool is the collection of alleles in a population.

Comparative genomics is leading to a more detailed and subtle understanding of evolutionary relationships among species

Uses of Microorganisms in Biotechnology

Somatostatin was the first human peptide hormone produced by recombinant bacteria

Many important medicines are produced by recombinant microorganisms

Bacterial species can be used as biological control agents

The release of recombinant microorganisms into the environment is sometimes controversial

Microorganisms can reduce environmental pollutants

1. ………… is the father of plant pathology.

   a) T J Burril

   c) Anton De Barry

   b) Needham

   d) E J Butler

2. ……… first time reported that plant diseases are caused by bacterium.

   a) Robert Koch

   c) Kuhn

   b) E F Smith

   d) T J Burril

DEFINITION OF VIRUS

Viruses are very small (submicroscopic) infectious particles (virions) composed of a protein coat and a nucleic acid core. They carry genetic information encoded in their nucleic acid, which typically specifies two or more proteins. Translation of the genome (to produce proteins) or transcription and replication (to produce more nucleic acid) takes place within the host cell and uses some of the host’s biochemical “machinery”. Viruses do not capture or store free energy and are not functionally active outside their host. They are therefore parasites (and usually pathogens) but are not usually regarded as genuine microorganisms.

Mathwas (1981) considers a virus as a set of one or more template molecules normally encased in a protective coat or coats of protein or lipoprotein, which is able to organize its own replication only within suitable host cells where its production is:

1. Dependent on hosts protein synthesizing machinery (ribosomes).
2. Organised from pools of required material rather than binary fission and
3. Located at sites which are not separated from the host cell contents by a lipoprotein bilayer membrane.

Bos (1983) defines virus as an infectious agent often causing disease, invisible with the light microscope (Sub-microscopic), small enough to pass through a bacterial filter, lacking a metabolism of its own and depending on a living host cell for multiplication. Viruses are small packages of host alien genetic information of one type. (RNA or DNA), either in one strand or in a few segment. Encapsulated together or separately and enclosed in a coat of one or more types of protein, some time with an extra coat (envelope) and some other constituents.

Plant diseases need to be controlled to maintain the quality and abundance of food, feed, and fiber produced by growers around the world. Different approaches may be used to prevent, mitigate or control plant diseases. Beyond good agronomic and horticultural practices, growers often rely heavily on chemical fertilizers and pesticides. Such inputs to agriculture have contributed significantly to the spectacular improvements in crop productivity and quality over the past 100 years. However, the environmental pollution caused by excessive use and misuse of agrochemicals, as well as fear-mongering by some opponents of pesticides, has led to considerable changes in people’s attitudes towards the use of pesticides in agriculture. Today, there are strict regulations on chemical pesticide use, and there is political pressure to remove the most hazardous chemicals from the market. Additionally, the spread of plant diseases in natural ecosystems may preclude successful application of chemicals, because of the scale to which such applications might have to be applied. Consequently, some pest management researchers have focused their efforts on developing alternative inputs to synthetic chemicals for controlling pests and diseases. Among these alternatives are those referred to as biological controls.

7.1 Introduction

Evaporation is an unit operation which converts a liquid into a vapour, leaving behind a concentrated solution or a higher boiling liquid. In other words, the goal of evaporation is to vaporize most of the water from a solution containing a desired product. Heat is the main tool in evaporation, and the process occurs more readily at high temperature and low pressures. Removal of water from foods provides microbiological stability, reduces deteriorative chemical reactions, and reduces transportation and storage costs. Evaporation can be distinguished from some other drying methods in that the final product of evaporation is a concentrated liquid, not a solid. It also differs from distillation, since the vapours produced in the evaporator are not further divided into fractions.

ABSTRACT

Over the last decade, hyperspectral remote sensing has become a powerful analysis tool for applications in environment and ecology, aquaculture, forestry, agriculture, and geoscience. A hyperspectral imagers advantage over broadband sensors, such as Landsat Thematic Mapper (TM) and the SPOT Haute Resolution Visible (HRV) sensor series, is its ability to detect molecular absorption and particle scattering signatures of constituents. The finer spectral resolution of a hyperspectral imager allows detection of surface materials and their abundances, as well as inferences of biological and chemical processes. This review highlights the vast extent to which hyperspectral technology and their application with special reference to ocean have been discussed.

Agroforestry is a land use system that involves two or more plant species at least one of which must be a woody perennial. When perennial woody and herbaceous components are grown together on the same piece of land their performance would largely depend on their ability to share various growth resources in a given environmental situation. Due to difference in growth pattern and resource requirement of the components in agroforestry situation, a close interactive relation is obvious. Thus, careful management practices for the components are required to establish a successful agroforestry system. The characteristics of the trees and crops, and their interactions, can be modified with good management practices in order to take advantage of the positive characteristics and minimize the effects of the negative ones. Effective and efficient agroforestry management may be divided into two groups - tree management and agricultural crop management.

Factors Affecting The Selection Of Tree Species

Trees in an agroforestry system contribute significantly to the total output of the system and therefore, success of the system depends on the selection of the tree species. The following factors are to be considered to choose the best tree species for the agroforestry systems in a particular site.

1. INTRODUCTION

The basic principle of plant breeding is the utilization of existing variation and creation of new variations. Ploidy breeding is one of the tools used for improving the crop plants. The year 1937 can be considered as a landmark in the history of plant breeding. The discovery of the specific action of colchicine in inducing polyploidy has provided the breeder with a means for increasing the scope of crop improvement apart from the removal of the barrier of sterility in the sterile interspecific hybrids by the production of amphidiploids and their utilization later for the transfer of useful genes from the wild parents to cultivated plants. It was hoped that the production of autoploids in various crop plants would directly lead to the cultivation of better plants, as generally the autopolyploids are known for their gigas characters including the seed.

Introduction

Agriculture accounts for a large share of Gross Domestic Product (GDP), exports, and employs more than 60% of the work force in India (FAO, 2001). The failure or success of agriculture determines the economic growth of the country. As human population grows so does the demand for food and, therefore, demand for land to grow food. Ironically, the demand to convert agricultural land to commercial and residential developments is also very high due to population growth and urbanization. This is reducing the amount of land available for agricultural purpose. This scenario is being noticed in most of the developing countries like India. Against this background, agriculture will be expected to meet food, feed, and fiber demands of a world population that is anticipated to grow from approximately 6 billion in 1999 to 11 billion by 2050 (USDA, 2010). Small and fragmented land holdings do not allow farmers to have independent farm resources like draught animals, tractors, bore wells, tube wells and other sophisticated farm machineries for various cultural operations. While crop production is the primary farming enterprise in the country, livestock raising serves as an auxiliary activity to crop production. About 90% of livestock population are in the hands of the smallholders where adequate supply of high quality forage is a common problem. Integrated farming system (IFS) models developed in different parts of the country involving dairy, duckery, poultry, horticulture, apiary, pisciculture and plantation crops viz. coconut, cocoa, nutmeg, banana, pineapple etc. along with crops, have been found to increase net profit significantly as compared to cropping alone.

Endocrine glands are organs which secrete chemical substances called hormones into the blood stream. Hormones are substances produced by specific glands, secreted directly into the blood and transported to various organs and tissues where they exert their effects. The term hormone is derived from the Greek root meaning to excite. The organs/cells where there hormones bring about their actions are called target organs/cells. The target organs (hormone binding receptors) posses specific receptors for bringing about the action of these substances. The term neurosecretion signifies the production and reiose of hormones by nerve cells that have the cytological characteristics of secretory cells.

Several hormones are the product of nervous mechanisms hence the term neurosecretion is used and neurohumour for such substances.

Hormones act as a mode of transmitting information in the body in addition to the nervous system. Their mode of action is slow but more prolonged. Chemically the hormones are either proteins or steroids. Hormones are secreted in very small amount but their actions are profound. Early investigators were hampered by the non availability of suitable methods for their estimation. The availability of radioimmunoassay, radio-receptor assay, enzyme linked immunological assay have greatly facilitates researches in the field of endocrinology.

The mode of action of these hormones has been elucidated in several instances. Involvement of membrane permeability and cyclic AMP has been implicated in several cases.

Most of these hormones have been of therapeutic interest for several decades. The mode of administration of steroid hormones can be both oral or parenteral while protein hormones are active only when injected. Several of these hormones are used for increasing the production potential of meat animal, for improving the reproductive efficiency of domestic animal, hence are of direct economic importance to the farmers. Chemical characterization and their synthesis including their more potent analogues in several cases, have greatly facilitated their widespread application in the animal production and animal health strategies.

Endocrinology is the study of the structure and function of the endocrine glands and their secretory products, including the consequences of excessive or deficient production of these hormones.

Organized retailing is spreading and making its presence felt in different parts of the country. The share of organized retailing in the total retail sector is set to increase from about 2 % to 8 -10 % by 2010. The retail sector generates 6 % of total employment in India. The reasons behind the increase in growth of retailing is changing life styles of Indian consumers. The key factors that drive the growth of organized retailing are:

• Rising urbanization
• Growing economy
• Higher disposable incomes
• Growing consumerism
• Entry of national/international business houses into retailing
• Increasing nuclear families
• Changing number of educated and employed women population
• Media proliferation and rising awareness level
• Brand proliferation
• Traveling by the working groups of the society
• Popularity within working and studying bachelors for convenience food.

The largest category of retail businesses are specialized retailers selling food, and beverages from fixed retail outlets. The major formats of retailing are furnished in Table17.1.

Livestock entrepreneur is a person who undertakes livestock based activities such as livestock rearing, production of livestock/ livestock products, processing and other inputs of livestock business. He finds ways and means to create and develop a profitable livestock business. Livestock entrepreneurs see their farming as a business and as a means of earning profits. So they are willing to take calculated risks to make profits and to grow their businesses. They are also motivated to improve livestock production through mechanization and application of technologies in the field of dairy, small ruminant, poultry and allied enterprises. Livestock entrepreneur is determined and creative person, always looking for opportunities to improve and expand his business. He likes to take calculated risks, and assumes responsibility for both profits and losses. An entrepreneur is passionate about growing his business and is constantly looking for new opportunities.Enterprising farmers are also innovators. They always look for better and more efficient and profitable ways to do things. Being innovative is an important quality for a farmer-entrepreneur, especially when the business faces strong competition or operates in a rapidly changing environment. They look for better ways to organize their farms. They try, better animals, and alternative technologies to increase productivity, diversify production, reduce risk and to increase profits.

Abstract

Similar to other north eastern states of India, the state of Manipur is also prone to recurring landslides. The National Highway 150 and the state Highway in Ukhrul, Nunghar and Paorei sectors often witness landslides due to geological complexities, rainfall and anthropogenic activities. So a study was conducted to prepare the landslide hazard zonation map for the region using the method developed by Bureau of Indian Standards, which indicates that 67.32 km² (nearly 56%) fall under high hazard zone. The RMR and SMR studies carried out in five test sites in such high hazard zone show that four sites fall under highly unstable category (class IV) and one under partially unstable category (class III). The kinematic analysis indicates dominant wedge failure. The improper landuse, lack of adequate drainage and toe removal for road widening are the major causative factors for the recurring landslides.

4.1 Introduction

A farm pond is basically small scale water harvesting and water recycling structure. It harvests water mainly in the rainy season when there is abundant rainfall producing sufficient runoff and the harvested water may be used for single or multiple cropping. When there is deficient supply of water to the crops it may supplement as supplemental irrigation. The leftover water in the pond can be used for growing another crop in winter when there is no or less rainfall. Ij addition, the stored water in the pond can be used for domestic and other uses and rearing fish. Thus it serves as viable medium for integrated farming system in rainfed farming ecosystem. Before designing a pond in a given location, it is very important to estimate the total quantity of water supply to the pond. The two main sources of water supply to pond are (i) in situ rainfall and (ii) runoff (some times called as discharge) generated from the catchment and conveyed to the pond. Some times there is groundwater contribution to the pond when the pond is unlined and the underlying groundwater table with reference to the ground level is at lower elevation than the depth of water in the pond such that there is a hydraulic gradient in the direction of underlying groundwater level to the water level in the pond.

Introduction

The creation of first humane life forms has been evidenced since 4 million years ago. They were reportedly called hunter gathers and hunted animals and collected seeds and fruits from wild plants for their livelihood maintenance as food stuff. These nomadic people moved from one place to another place as they depleted the resources of an area. The trial-and-error experimentation and manipulation of species, the scene was set for domestication of plants and animals. In addition, these hunter-gatherer societies probably paved the way for domestication by developing the social structures (later on promoted to village organizations and cooperation) as well as knowledge of cultivation techniques (later on institutes and knowledge centre).

Early Farming (1650 & Before)

Around 12-10,000 years ago human being started farmingin search of food stuff for maintain their livelihood.

It was reported that the roots of farming began within the gift day of Turkey and Middle East the geographical region, referred to as Fertile Crescent of the geographical region. Cultivation and replantation involves the deliberate sowing or alternative management of plants, that don’t essentially take issue from wild populations. The beginning of farming is primarily associated with the domestications of several species; it involves genetic change of wild varieties through conscious or unconscious human selection, the start of farming is primarily related to the domestications of many species; it involves genetic amendment of untamed varieties through aware or unconscious human choice. 2 of the earliest settlements area unit referred to as Cata Huyuk and Jericho, as reported. Folks began to taking regarding wild grasses and mistreatment the seeds for food and planting for following year’s food. These seeds area unit currently referred to as cereals and compose an outsized proportion of the world’s food provide. Water was 1st primary demand of existence of life whereby Jericho, like several early cities was set around a uniform water supply, a spring that created over a thousand gallons each minute. Reportedly, around 2 to 3 thousand folks lived there. Farming of wheat, barley, peas, and lentils supported these folks were found there.

Introduction

India is the seventh largest having 329.73 million ha of geographical area and second most populous country having more than a billion population in the world. There is no other substitute other than to use every square inch of land and every drop of water effectively and efficiently. Though there was markedly increase in annual food grain production from 51 (195051) million tones t0 206 million tones (200001), still the death on hunger is visualized.

The demand for food is increasing with everincreasing population growth rate. So there is no option other than to increase food production. There is very little or no scope of horizontal expansion due to land limitation, the question of vertical expansion is the only way to fit with the situation. Genetically improved crop variety, hybrids, mechanized agriculture, higher rate of fertilizers and chemicals application may give one or two more green revolution, but the question lies how far it can sustain greenness?

Adoption of improved crop cultivars, cropping system, increasing cropping intensities, precision farming can hold good to get out of this situation where whole system is to be considered.

The cropping intensities in the states like Assam, Bihar, MP, Orissa, UP and West Bengal are 137.7, 137.8, 125.6, 154.6, 148.6 and 159.6 percent, respectively (FAI, 199495). This indicated that a vast majority of lands remain fallow during dry season due to lack of proper technologies, which are under rainfed conditions, neglected. Except West Bengal, more than half of the arable land remains fallow during rainless period. Increasing cropping intensities in rainfed uplands is not easily achievable but there is great potential of intensification of cropping in rainfed lowland by utilizing natural resources and conserved residual moisture. Pulses like black gram, green gram, lentil, lathyrus, chick pea and oilseeds like linseed, groundnut, rapeseed could not only increase the cropping intensities but also come forward to increase national productivity.

Technology transfer is an important commercial tool for leveraging and optimizing the value of intangible assets in the present era of globalization which has deepen the process of integration of the economic resources including the free movement of goods, merchandise, services, capital and intellectual property rights. This economic integration is facilitated by a legal framework of World Trade Organization (WTO) under various agreements including the Trade Related Aspects of Intellectual Property Rights (TRIPS). There are other International Institutions i.e., World Intellectual Property Organization (WIPO), World Customs Organizations (WCO) and United Nations Conference on Trade and Development (UNCTAD) to regulate and provide guidance for the protection and enforcement of IPRs. The present global economy is geared and triggered by knowledge and almost 80 % of the global wealth comes from knowledge based intangible assets and helps optimization of the limited global resources. Technology transfer is a tool for leveraging the value of IPRs and also for sharing knowledge around the world. Knowledge is weightless and in today’s era, knowledge is driven by Information and Communication Technology (ICT) which adds to productivity in all aspects of economic life.

The term “Technology transfer” broadly connotes transfer of knowledge from one legal entity to another legal entity within and outside the national territories of the legal owner of the Patent holder at a consideration, known as license fees or technical fees or royalty. This may happen as a part of Foreign Direct Investment (FDI) or as a part of pure technological collaboration. In other words, Transfer of Technology (TOT) and Technology Commercialization allows the transfer of the technology by a patent holder to a user for further development and exploitation of the technology into new products, processes, applications, material or services. Patent provides an exclusive right to the patentee to exclude others from using an invention without his consent and the technology transfer is the process to include the licensee as the legal user without infringing the rights of the patentee. The exclusive right granted to a patentee is the right to prevent others from making, using, selling, or distributing the patented invention without his permission. The technology transfer allows the user to use the patented technology with the consent of the patent holder.

5.1 Introduction

Food is the basic requirement of every living being and it provides physical, mental as well as emotional satisfaction. Globally, there are many food enterprises which provide this basic necessity across the nations irrespective of nature of origin and climatic condition. Food companies are required to provide products at certain quality parameters so as to maintain the uniformity in the food system. Hence, food quality can be defined as a total of traits and criteria which characterize food as regard to its nutritional value, sensory value, convenience as well as the safety for a consumer’s health. Food quality is the quality characteristics of food that is acceptable to consumers. This includes external factors as appearance (size, shape, colour, gloss and consistency), texture, and flavor; factors such as grade standards and internal (chemical, physical, microbial). Due to the various food risks, all over the world the quality regulation authorities have intensified the efforts to improve food quality. Some of the quality related systems are obligatory by law while other is voluntary which are to be implemented by the various food chain members.

Many companies are forced to improve safety and quality of their products by implementing the quality and safety assurance and management system because of growing consumers’ expectations and concerns as regards food quality and safety.

In order to attain maximum profit and decrease the flaws, a new system was developed and followed by various companies all over the world. This new system is known as Six Sigma. The application of this system has the capability to reduce the losses considerably by reviewing the process parameters and increasing the profit exponentially. It constitutes a systematic approach to assure that food products have particular traits at any stage of production and distribution.

8.1 Introduction

Electron Microscopes were developed due to the limitations of Light Microscopes which are limited by the physics of light to 500x or 1000x magnification and a resolution of 0.2 micrometers. In the early 1930’s this theoretical limit had been reached and there was a scientific desire to see the fine details of the interior structures of organic cells (nucleus, mitochondria etc.). This required 10,000x plus magnification which was just not possible using Light Microscopes. The Transmission Electron Microscope (TEM) was the first type of Electron Microscope to be developed and is patterned exactly on the Light Transmission Microscope except that a focused beam of electrons is used instead of light to see through the specimen. It was developed by Max Knoll and Ernst Ruska in Germany in 1931. The first Scanning Electron Microscope (SEM) debuted in 1942 with the first commercial instruments around 1965. Its late development was due to the electronics involved in scanning the beam of electrons across the sample. Electron microscope has been a valuable tool in the development of scientific theory and it contributed greatly to biology, medicine and material sciences. This wide spread use of electron microscopes is based on the fact that they permit the observation and characterization of materials on a nanometer (nm) to micrometer (µm) scale. Electron Microscopes are scientific instruments that use a beam of highly energetic electrons to examine objects on a very fine scale. This examination can yield information about the topography (surface features of an object), morphology (shape and size of the particles making up the object), composition (the elements and compounds that the object is composed of and the relative amounts of them) and crystallographic information (how the atoms are arranged in the object). A scanning electron microscope (SEM) is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The electrons interact with atoms in the sample, producing various signals that can be detected and that contain information about the sample surface topography and composition. SEM can achieve resolution better than 1 nanometer. The combination of higher magnification, larger depth of focus, greater resolution, and ease of sample observation makes the SEM one of the most heavily used instruments in research areas today.