eChapters

Laboratory Tests

Sampling procedures

Samples from number of containers- As soon as the cans are received at the reception dock, remove the lid, mix contents of each can with a plunger and draw equal quantities from each container and mix together. Draw approximately 80 – 100 ml of sample for testing. If the cans are of same diameter, Alternatively, milk from different containers are first poured into a vat and then the sample is drawn by thorough mixing as above..

Samples from storage tank – Before drawing sample from storage tank, switch on the mechanical agitator and allow the contents to mix for 15-20 minutes. Discard first 1.0 L of milk. Transfer 250-500 ml of the mixed milk from the outlet valve into a sample bottle.

Samples from rail / road tankers- Open the lid of the tanker and insert a big plunger through the main hole and move it forward, downward and backward bring the plunger to the surface at each stroke. Continue mixing for 15-20 minutes. Draw proportionate quantities of sample with the help of suitable dipper from different levels. Draw 250-500 ml of well-mixed sample into the sample bottle. The total volume of individual composite sample should not be less than 150 ml.

Introduction

Food is the basis to sustain a healthy life as evidenced from its consumption through centuries by human. There are plenty of plenty of foodstuffs available these days as part of new product development and flexible global participation of researchers and food technocrats. Their researches brings a lot reforms in traditional recipes through newest technological concepts (functional or nutraceutical) that address much of safety aspect for consumers health and is the prime focused concern for now (Keservani, et al 2014). Even than strict labeling policies is the present hour need to stay fit and fine. Safe and wholesome supply of foods, high pace food demands, increase in processing aspect, minimization of fraudulent practices are the key points that somehow require laws and standards during transportation, storage, marketing and storage.

Nation’s growth resides in their healthy people that contribute flawless to acquire achievements in overall growth of country. So availability of healthy food is must which can only be governed through strict standards and regulatory agency’s regulation. Journey of food from “Production to consumption”, “Farm to fork”, “Unstable to table” and “Boat to throat” are the activities where these agencies abide their regulations by way of laws and standards. Indian market somehow lacking its policy to organize food regulation appropriately hence is segmented in two types of food products viz;

Introduction

Baking is not a new concept to us. Baking process dates thousand years back since the Paleolithic age. During those days, the baking was done by simply grinding the grains, mixed with water and baked on the hot rocks. The bread produced that time was not leavened but flat. Ancient Egyptians have the credit for development of baking between 2600-1200 BC. Roman Empire also had the popularity of the art of baking and bakeries were in existence in Europe too during Middle Age. Baking was considered a highly respected profession under the Roman Empire. The art of baking has travelled a long journey since then. The bakery and confectionary has undergone a gradual evolution with time. Great technical progress stared in the nineteenth century. Development of automatic machines reduced the task of the manual labour and because of this development the bakers could perform many more tasks with the machines. Today’s baking has a dependency on the machines. All the work is performed by the automated machines whereas the bakers only control the machine operations. The baking process has become easier, the efficiency has increased and the quality of the products has improved because of these high-tech machines. The preparation of bakery products using traditional methods has also improved over the time to minimize the energy and time consumption. Today’s consumer is very much concerned about his/her health and look for the healthy options in baked products. The trend has led to various innovative formulations for the baked products so that the health benefits may also be provided not only the calories. This chapter will discuss various advancements and trends in different types of bakery and confectionary products.

Introduction

Over the years, processed food industry has become the largest growing industry in the world. The convenience food industry with the state of the art technology has been proved very successful in reaching every household and have started replacing fresh and healthy foods with the processed ones (Srinivasan and Shende, 2016).

Demand for processed and convenience foods are constantly on rise and convenience food segment is rising by leaps and bounds. Changing life style, food habits, displacement of rural population to urban centres, insufficient time to prepare healthy food and changing socio economic needs have led to the industrialization of the food supply and resulted in the development of convenience foods and today a great variety of the same are available for sale to the consumer throughout the world (Tillotson, 2003).

These convenience foods are available readily, convenient, inexpensive with pleasing organoleptic quality, requires minimal or no preparation before consumption. Varieties of convenience foods which are available in the market play a prominent role in the food choice of today’s consumer, and they include frozen and canned vegetables, bakery products, soups, sauces, prepared meat and fish, chilled and frozen dairy products as well as ready to eat and shelf stable products (Tillotson, 2003).

Rapid switchover of the consumer from the traditional dining practices to fast food centres, generally feed on quick and easily made products called fast foods, often termed as unhealthy junk foods. These foods are rich in saturated fatty acids, several refined components, high carbohydrates etc., which ultimately lead to the negative impact on physical and mental health of the consumer, contributing to several chronic diseases such as cardiovascular complications, cancer, atherosclerosis, liver disease, type 11 diabetes (Veggie et al., 2018) etc.

Therefore, focussing much about the health of the consumer, there is a great need for a healthy and a balanced diet to meet the basic needs of the human body (Mendes et al 2013) with an appealing organoleptic properties and appearance.

Abstract

Agriculture is one of the most important factors contributing to the economic growth of India. Out of the 329 million hectares of India’s geographical area, about 114 million hectares are under cultivation. There are 17 essential elements required for proper plant growth. Of the mineral elements, the primary macronutrients (nitrogen, phosphorous, and potassium) are needed in the greatest quantities and are most likely to be in short supply in agricultural soils. Secondary macronutrients are needed in smaller quantities, and are typically found in sufficient quantities in agricultural soil, and therefore do not often limit crop growth. Micronutrients, or trace nutrients, are needed in very small amounts and can be toxic to plants in excess. Silicon (Si) and sodium (Na) are sometimes considered essential plant nutrients, due to their ubiquitous presence in soils.

The economy of India thrives on agriculture, the most practiced occupation in the country. Agricultural fertilizers are essential to enhance proper growth of plants and crop yield. Recently, farmers have been using chemical fertilizers for quicker and better yield. But these fertilizers endanger ecosystems, soil, plants, human and animal lives. In contrast, naturally grown biofertilizers not only give a better yield, but are also harmless to humans. This chapter aims to study the biofertilizers play a key role for enhancing economic development of sustainable agriculture (EDSA) in comparison to chemical fertilizers. Biofertilizers improve the crop yields, plant resistance, soil health, profit to farmers, and the benefit to cost ratio of biofertilizers were higher than chemical fertilizer, proved that the biofertilizers would lead to better sustainable economic development for the farmers and their country.

Abstract

Potassium is a very essential nutrient element that is required for proper health, growth, functioning and productivity of plants. However, up to 98% of this very important mineral is held up in insoluble, unavailable forms in the soil and with only approximately 2% soluble form available for plant use. Biofertilizers add nutrients to the soil for plant use by some mechanisms like the breakdown of phosphorus, potassium, fixing nitrogen, and also synthesizing some substances which in turn enhance plant growth. These processes take place naturally. Microorganisms that solubilize potassium have demonstrated an increased potassium uptake by plants when added as bio-inoculants consequently resulting in increased yield by these plants. This article reviewed the methods of isolation of potassium solubilizing bacteria and fungi and their use as biofertilizers. Data are presented showing summary of researches conducted on potassium solubilizing microorganisms and their findings. Figures on production efforts of biofertilizers in India per year and by states are also added.

Introduction

Indian agriculture began by 9000 BCE as an after effect of earlier agriculture of plants, and conduct of crops and animals. Settled activity once again followed with accessories and techniques accepting developed for agricultural heritage system. Previously, double monsoons led to two harvests accepting reaped in one year alike various countries. Indian online inscription once again able the prime via complete trading networks and adopted crops were at variance in India. Plants and animals are advised basal to their adjustment by the Indian that came to be admired and venerated. The boilerplate ages are of saying irrigation channels adeptness a new affiliated of accord in India and Indian crops affecting the economies of added regions of the world. Land and water management systems were developed with an aim of accouterment accordant growth and crop productivity. Despite some stagnation during the afterwards strike era the Republic of India was able to beforehand a complete agricultural programme. In India, there are about 110 crore of farmers engage i.e. two-third of complete workforce, contributes to 26 per cent of the GDP and about one-sixth of the complete address earnings. India associated a repulsive agricultural system at the time of expertise growing at a ritual quantity in advance of 0.3 per cent in the earlier bisected of the stand for the century. Perplexing building up of lateral population pressure provided by agricultural scientists and harder plan put in by the farmers due to the planned Government agricultural policies. Indian agriculture has able to provide a service in advance an amount of 2.7 per cent in the procession expertise in the following era. The beforehand in food particle accession was a lot of arresting at about 3.7 per cent compared to population before of 2.2 per cent during the decade of 1980’s. Unfortunately, it slowed down in 1990s to 1.8 per cent, lower than the population earlier by 2 per cent. Further, rural agriculture across too, the development has been admit in accession and prosperity of crops in several regions. All said and done, overriding the three-fold in advance at population by a four time admission in food stuff succession from the earlier 5 year plan to the change about of the period by all agencies an admirable achievement. The key macro indicator of borough expertise in agriculture comprised in advance jump in food succession from budgetary provision of rupees 50.8 crore in 1950-51 to 212 crore in 2000-2001. It is annual budget up to date that 92 per cent of the entrance in achievement has been technology-led. Thanks to the agricultural scientists for developing location based technologies and animate off to the Indian farmers for their activity to ideas, activity to acclimatize and as able to accepting of new and bigger authentic knowledge.

Introduction

The food problem in the world is expected to become more serious if the world population keeps growing at the present rate. Out of various strategies to solve the problem, the post-harvest handling of the grains is of paramount importance. Tribolium species is major pest of stored grain and grain products in the tropics. Control of this insect relies heavily on the use of synthetic insecticides, which has led to many problems such as increasing costs of application, pest resurgence, pest resistance to pesticides and lethal effects on non-target organisms in addition to direct toxicity to users and disturbances of the environment. Thus, insecticides of natural origin are rational alternatives of synthetic insecticides. Several botanicals, natural products and their derivatives have been reported and exhibit better efficacy and potency against the stored grain pests.

In the present investigation, an attempt has also made to test ovicidal, larvicidal and adult emergence suppression potentials of the extracts of some of the locally available Indian medicinal plant viz., Datura stramonium, Ricinus communis, Vitex trifolia and Nerium indicum against T. castaneum against T. castaneum, commonly called as Red flour beetle.

All bread is made by baking a dough that has two basic ingredients, flour or meal and a liquid. Bakers can use a wide variety of both components. The most common type of flour used for bread and most other baked goods is made from wheat. Wheat flour has a pleasant taste and contains a large amount of an elastic protein substance called gluten. Gluten aids in baking uniformly light bread that rises (swells) properly. Other baking flours are made from barley, rye, corn, rice, oats, soybeans, and potatoes. These flours, particularly soybean flour, may equal wheat nutritionally, but none can match wheat for creating light, even-textured bread. Hard wheat flour makes lighter bread than does soft wheat flour because it is richer in gluten. Rye and whole wheat breads are made lighter by adding white flour. The liquids used in baking include water, sweet or sour milk, yogurt, wine, and beer.

Bread is either leavened or unleavened. Leavened breads contain some substance that produces bubbles of carbon-dioxide gas. These gas bubbles inflate the dough, causing it to rise and become light and porous. Most kinds of basic breads are leavened with a fungus called yeast. Biscuits, muffins, and cakes and other pastries are leavened with either baking powder or baking soda. Unleavened bread is dry and hard. Familiar kinds of unleavened breads include water crackers, the rye crisp of Sweden, and Jewish matzoth. Whether leavened or unleavened, most breads contain other ingredients in addition to flour and a liquid. An almost limitless variety of breads can be made by adding a sweetener, shortening, cheese, eggs, meat, fruit, vegetables, seeds, or nuts. A sweetener, either sugar or syrup, is used in almost all bread for its taste or as an aid to yeast growth. Bread may also have an external sweetener in the form of a decorative glaze. The high fat content of shortening and cheese increase tenderness and flakiness in bread. Perhaps the best example is the French croissant. Eggs help leaven bread dough by adding to the bread’s lightness. They can be brushed on top of the dough before baking to create a shiny crust, as in the Jewish hallah. Some breads from many nations contain fruit, a vegetable, meat, seeds, or nuts. Examples include the fruit scone of Great Britain, the spinach paratha of India, the Southern sausage bread of the United States, the Easter sesame bread of Greece, and the almond sweet bread of Finland.

Design and construction of farm including management is important with the advancement of cultural practices and increased involment of people. These are some common resources for breeding, rearing and display of ornamental fish.

Small scale commercial farms

Mazla/earthen vats

These are baked earthen containers and usually round in shape. These are used to keep the gravid female of livebearer fish for breeding. Its water holding capacity is 7.5-10.0 litre.

Feed plays a vital role not only in growth but it also enhances the market value of ornamental fish. In natural waters, fish has access to a variety of natural food items, but their overall wellbeing depends upon the availability of their favorite food. However, in a confined system, nutritionally balanced supplementary feed is indispensable due to limitation on availability of natural live fish food organisms. In general, ornamental fish are fed with a variety of commercially available pelleted feeds, imported from countries like Singapore, Hong Kong, Korea and Thailand etc. Although they are very popular among ornamental fish hobbyists, the high cost of these feeds is not economical for commercial-scale application at farmer’s level. Further, in contrast to food fish in a pond, feeding ornamental fish in smaller culture units need high precision. Therefore, it is essential for an ornamental fish producer to possess technical know-how regarding nutritional requirements and feeding behaviour of different species in order to formulate farm-made feeds by using locally available low- cost ingredients.

Formulation of low cost and nutritionally balanced supplementary feed, using locally available ingredients, is the key to the success of ornamental fish culture in India. To reduce the cost of feed and make the ornamental fish production venture more profitable, the feed can be prepared at farm by using cost-effective and locally available quality ingredients (plant/animal-based).

Identification and selection of the feed ingredients are essential and it should be according to the fish species to be cultured. A number of feed ingredients may be locally available which can be used for feed formulation. Fish culturists have to identify and choose the best ingredients, depending upon its easy availability, nutrient status and cost, keeping in mind the nutritional requirement of ornamental fish (size, feeding habits, etc.) to be cultured.

Introduction

India has progressed well on food production from 51 million tonnes (mt) in 1947, 286 mt in 2018-2019 owing to the largest contribution from wheat and rice (about 213 mt). But simultaneously our population has also grown to about 135 billion in 2018. Therefore, the impact of higher production is not realized in absolute terms. Indian agriculture has come a long way since independence achieving food security in major crops, declining rate of rural poverty, rise in agricultural incomes and nutrition levels have gone up. Higher production has also been recorded in sugar, cotton, oilseeds, fruits, vegetables, milk, fisheries and poultry. All this has made us a proud with achieving self-sufficiency in food security. However, on the socio-economic front, the picture does not become rosy as we have a lower strength of socio-economic development indicators even among developing countries. Still the reports of under nourishment, hunger and poverty rings the bell. However, the importance of agriculture cannot be negated because it provides sustenance to mankind, food and employment to all. Considering the emerging challenges of climate change impacting agricultural productivity and increasing variability, poor investment in research, skill development of farmers, post-harvest losses etc. New strategies and innovations in agriculture, particularly on the development of climate resilient varieties with high productivity and better nutritive quality are called for, which has to be led by structural reforms and infrastructural augmentation.

Introduction

Majority of the India’s population (about 70%) depend directly and indirectly on agriculture for a living, and thus, the sector must attain self-reliance for their future survival. The North Eastern Region (NER) of India comprising the states of Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Tripura and Sikkim covers a total area of 26.2 million hectare (7.97% of the India’s total geographical area). Of this area, hill and mountain region accounts for about 70% area that excludes Assam plains. The region is characterized by unique geophysical socio-cultural and environmental features. Drought and floods are the two miseries for the farmers of North Eastern Region of India (NER). The poorest people are likely to be the hardest hit by impacts of climatic factors and its change because they rely heavily on climate-sensitive sectors such as rainfed agriculture and fisheries. They are also less capable to respond due to limited human, institutional and financial capacity and have very limited ability to cope with climate impacts and adaptation options in agriculture sector to a changing hazard burden (Ngachan and Das, 2018). The NER of India is endowed with enormous water resources potential that accounts for about 34% of the country’s total water wealth. In spite of the abundant water resources, the ratio of percent irrigated area to net sown area varies from 5% in Assam to 28% in Arunachal Pradesh with an average of 10.6 % in NER. This is less than one-fourth of the national average of net irrigated area which currently stands at 43.2% (Sharma et al., 2010). The water scenario in the region is skewed and is characterized by plenty and scanty syndrome, i.e. excess water during rainy season and severe scarcity during post- and pre- monsoon season. There is wide variation of rainfall in space and time. It is projected that by 2021, an additional 15 million population will be added to the current 45 million in the region (Choudhury et al., 2012). Hence, adequate planning and management of these bountiful but most vital resources are required for overall sustainability of agriculture in NER.

Introduction

The digital farming solutions by various advanced tools and technologies became a prime important to see the future smart agriculture in India with enhanced productivity and farmer’s lifestyle upliftment. The agriculture industry facing challenges from farm to market by climate interfacing and energy conservations practices during farming operations. The use of innovative industry 5.0 is targeting a farming society to achieve high productivity by hardware devices like Robots, Drones, Automated Guided Vehicles (AGVs) working on the basis of Artificial Intelligence (AI), Machine Learning (ML), Deep Learning (DL), Big-Data, IoT and Cloud-based software tools and interactive software programs.

The use of tractors, combine harvesters, power tillers etc. like advanced machineries are practiced in present farming practices by youth farmers; however the digital tools with an automation of existing advanced farm machinery became an attraction to see human comfort. The custom operative design and development of digital tools are essentially becomes a need to innovate and exercise in finding best technologies for Indian farming society. The agricultural society spent several years and now also synthesizing an operational description for digital farming. There are several ways of opting solutions by using new digital logistic tools with software and hardware engagements. As we know agricultural production is influenced by climate, weather, soil properties, plant genetic profile, plant peripheral environment, plant protection, plant nourishing, harvesting and post harvesting like operational tasks. All such a challenging task can be handled by advanced digital tools and technologies.

Marigold (Tagetes spp.) is an important annual flower crop; native to Central and South America especially Mexico and belongs to family Asteraceae (Compositae). It is commonly known as “Gainda” in India and also called as “Friendship Flower” in United States of America. Loose flowers of marigold are in great demand throughout the year. It is commercially grown in tropical and subtropical regions of India owing to its ease in cultivation, hardy nature, wider adaptability and year round availability of single, semi-double and double flowers of vibrant colours. Marigold is grown over an area of about 66.09 thousand hectares with production of 603.18 thousand MT loose flowers in India. Major states involved in loose flower production of marigold are Karnataka, Madhya Pradesh, Gujarat, Andhra Pradesh, West Bengal, Maharashtra, Haryana and Chhattisgarh. In India, Assam is the only state, which produces marigold for both cut as well as loose flower purpose on an area of about 0.61 thousand hectare (Anonymous, 2016a).

Marigold is a cross-pollinated flower crop and it is pollinated by insects (Kaneko et al., 1990). It bears terminal and solitary inflorescence, known as head or capitulum, which possesses long and hollow peduncle with swollen apex and campanulate involucres (Setshogo, 2005). Capitulum consists of peripheral ray florets and central disc florets. Ray florets are pistillate, ligulate, sessile, epigynous and zygomorphic, whereas, disc florets are bisexual, tubular, sessile, epigynous and actinomorphic (Subrahmanyam, 1996 & Setshogo, 2005).

African marigold (Tagetes erecta L.) is a diploid species (2n = 2x = 24), while, French marigold (Tagetes patula L.) is a tetraploid species (2n = 4x = 48) with basic chromosome no. of x = 12 as revealed by breeding work of various researchers (Towner, 1961, Chen and Lin, 1981, Chen and Lin, 1982, Serrato-Cruz et al. 2000, Zhang et al., 2011). Tagetes erecta and Tagetes tenuifolia are diploid species, whereas, Tagetes patula, Tagetes minuta, Tagetes biflora and Tagetes remotiflora species are tetraploid in nature (De, 2017). On the basis of floral morphology; three different types of male sterile systems i.e. apetaloid, petaloid and gynomonoecious types was observed in African marigold (Prakash et al., 2016). Out of these, apetalous male sterility (femina type) is more reliable and preferred over petalous male sterility because later is more prone to break down (Goldsmith, 1968 & Janakiram, 2004). Apetaloid male sterility was controlled by single recessive gene (Prakash et al., 2016). A monogenic recessive male sterile apetalous mutant was detected from T. erecta population by Khoshoo (1979). Cyto-genetic male sterility is also found in marigold (De, 2017). Petaloid and gynomonoecious male sterile systems were controlled by cytoplasmic inheritance (Prakash et al., 2016). In marigold, cytoplasmic genetic male sterile lines were also developed for commercial production of F_l sterile hybrids (Pratibha et al., 2000).

4.1. Introduction

Many countries have set up a network of agrometeorological observatories to regularly record important weather parameters such as clouds, rainfall, surface temperature, humidity, wind and wind direction, solar radiation, soil moisture, temperature and humidity profile of the atmosphere, etc. The observation process is performed either manually or through Automatic Weather Stations (AWS).

This recorded information is used for weather forecasting, natural resources management and for tracking agricultural production. However, these networks, which handle data of high spatial climate variability, are typically less robust than they should be. Moreover, the agrometeorological data collected from different ground stations is not transmitted in real time to a central collection point which limits the use of information.

Satellite remote sensing technology is an alternative system that is gaining popularity in the recent times which has allowed us to obtain frequent and precise measurements of vital agrometeorological parameters such as rainfall, solar radiation, temperature, evapotranspiration, albedo etc. Satellite data has many advantages over traditional ground stations, such as high spatial resolution (50 m–5 km), wide spectral bandwidth range (0.4–3.75 um) and high temporal frequency (even half an hour) and the prospect of collecting data from remote areas. In addition to routine repeated observations, satellites often provide synoptic views of the earth’s surface from space on a wide scale and have archive of information to create baseline data.

The preparation, planning and use of agricultural technologies for agriculture, needs application of agricultural meteorology. The role of agrometeorology in the last three decades has increased in terms of increasing food and nutritional security for the burgeoning population and natural resource management particularly in the context of global climate change. Agrometeorology can help to minimize inputs, thus clarifying the contribution of ecosystems and agriculture to the carbon budget in the event of global change. Agrometeorological information needs to be disseminated to users in time and space quite accurately, as agricultural activities are linked to the very local situation where the outputs of modern tools such as local area models, climate models, and dynamic crop simulation models are reduced to finer grid resolution and combined using GIS to extract practical suggestions. This chapter describes the recent applications of remote sensing in Agrometeorology.

There are various weather hazards that affect agricultural productions. These hazards affect crops and agricultural productivity negatively if they are not checked. Weather hazards include cyclones, droughts, floods, hailstorms, heatwaves and cold-waves. The hazard is distinguished from an extreme event and a disaster. An extreme event is simply an unusual event; it does not necessarily cause harm. A disaster is an event that does cause harm in significant amounts. Weather hazards are often called as natural hazards. The natural hazards become natural disasters when people’s lives and livelihoods are destroyed. Hydrologic hazards are the result of either excess or a severe lack of water, i.e., flood or drought. By issuing accurate forecasts and warnings in a form that is readily understood and by educating people about how to prepare against such hazards, before they become disasters, lives and property can be protected.

DROUGHT

Drought is a relative term used with reference to deficiency of rainfall when compared to normal rainfall of a given location. However, drought cannot be defined in terms of amount of rainfall or number of days without rain. Since ancient times droughts have had far-reaching effects on humankind by causing the failure of crops, decreasing natural vegetation, and depleting water supplies. Drought is different from other hazards; in that it develops slowly. It is a hazard that requires many months to emerge and that may persist for many months or years thereafter. This type of hazard is known as a ‘creeping’ hazard. Generally, this occurs when a region receives consistently below average precipitation.

The climate system is the highly complex system consisting of five major components; the atmosphere, the hydrosphere, the cryosphere, the land surface and the biosphere, and the interactions among them. The climate system evolves in time under the influence of its own internal dynamics and because of external forcings such as volcanic eruptions, solar variations and human-induced forcings such as the changing composition of the atmosphere and land-use.

The term ‘climate variability’ is often used to denote deviations of climatic statistics over a given period of time (e.g., a month, season or year) from the long-term statistics relating to the corresponding calendar period. In this sense, climate variability is measured by those deviations, which are usually termed anomalies.

‘Climate change’ refers to a statistically significant variation in either the mean state of the climate or in its variability, persisting for an extended period (typically decades or longer). Climate change may be due to natural internal processes or external forcings, or due to persistent anthropogenic changes in the composition of the atmosphere or in land use. The United Nation’s Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as ‘a change of climate behaviour which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods’. The UNFCCC thus makes a distinction between ‘climate change’ attributable to human activities altering the atmospheric composition, and ‘climate variability’ attributable to natural causes. Climate change is a long-term shift in weather conditions measured by changes in temperature, precipitation, wind, snow cover, and other indicators.

A key difference between climate variability and change is in persistence of ‘anomalous’ conditions. In other words, events that are used to be rare occur more frequently, or vice versa. Occasionally, an event or sequence of events occurs that has never been recorded before, such as the exceptional tsunami in the Indian Ocean in 2004 or hurricane season in the Atlantic in 2005. Yet even that could be a part of natural climate variability. If such a season does not recur within the next 30 years, by looking back it could be called as an exceptional year, but not a ‘climate change’. Only a persistent series of unusual events taken in the context of regional climate parameters can suggest that a potential change in climate has occurred.

Introduction

Potato is mostly considered as a vegetable crop in India, whereas it is a staple food crop in Europe, Canada, Australia, U.S.A, South America, Russia, Asia and other countries. In India, it is cultivated extensively in the hilly tracts during December-March or March-June and in the plains during September-January, as it requires cool and moist climate condition. As per FAOSTAT (2015), the potato production in India during 2013 was 45.34 mt from 1.99 mha area with a productivity of 22.76 t/ha. There are several varieties of potato grown in India and many diseases, some of which cause considerable damage to the crop. Potato crop can be affected by diseases caused by fungi, bacteria, virus, viroids and others by non-parasitic.

Late Blight

Economic Importance: Late blight is one of the most devastating diseases of potato throughout the world. It is recorded in area with frequent cool and moist weather. The disease is believed to have been introduced into Europe from South and Central America and spread to other countries which include the East Coast of Canada, Western Europe, Central and Southern China, South Eastern Brazil and the tropical highland. It created history by causing a famine in Ireland known as Irish Famine during 1845-46 resulting in death of many people due to starvation, dysentery and typhus spread among the farmers and subsequent migration of people from Europe especially from Ireland. Late blight has the tremendous potential to cause upto 70% reduction in the yield in a susceptible cultivar. Region wise economic importance of late blight shows that the disease takes highest toll of potato in Sub-Saharan Africa (44% crop losses) followed by Latin America (36%), Caribbean (36%), South-East Asia (35%), South-West Asia (19%)

Tomato (Lycopersicon esculentum Mill.) is one of the most important vegetable crop and is known as protective food due to its wide spread production and special nutritive value. Tomato is referred to be native of tropical America. In the 16^th century, it got spread from America to other parts of the world and became popular in India within the last six decades. It is known as world’s largest vegetable crop after potato and sweet potato. The overall world production of tomato is 1,180,000 tons with a productivity of 65 t/ha. Contribution of USA in tomato production is 13.2 million metric tons to the total world production (FAOSTAT). USA ranks third in position in the total world production of tomato after China and India (FAOSTAT). India produces 22,337MT of tomato from 801ha area.

Fungal Diseases

Fusarium Wilt

Economic Importance

Fusarium wilt caused by Fusarium oxysporum being so widespread, turns out to be a significant problem in many crops. It is one of the most widespread and damaging diseases of tomato wherever tomatoes are grown intensively. The pathogen also causes damage to many other crops likepotato, and pepper of the family Solanaceae. Yield losses of effected crops can goup to 45% in tomato in India.

Introduction

This chapter has analysed the impact of shrimp farming on the farmer households. Income and employment generation being two important aspects, impact of shrimp culture on these two are discussed in this chapter. The income generated through shrimp culture is compared with the income from paddy cultivation. Returns to scale and returns to labour from shrimp culture are discussed to know whether shrimp culture is a preferred activity compared to paddy cultivation or not. Besides, the impact of shrimp farming on asset creation, expenditure pattern and savings behaviour of the sample households has been discussed in this chapter.

2.1 Introduction

Microbes are the oldest form of the life on earth. These organisms date more than 3 billion years to a time when they were covered with oceans. They are so tiny in size that million microbes can fit into the eye of a needle. Without microbes, we can’t live. Thus, understanding microbes is vital to understanding past and future. Microbes play vary roles in the earth’s environment recycling dead plant and animal matter through the soil, removing CO₂ from the atmosphere by photosynthesis in the oceans and nitrogen from the atmosphere to form nitrogenous fertilizers plants. Microbes play an important role in nutrient recycling, management, organic matter, decomposition and increasing the crop productivity and quality against diseases. Over the past century, many of the basic scientific principles of plant nutrition and soil fertility have been explained. In developed countries, inorganic chemical fertilizers have been widely accepted as a major source of improving and maintaining soil fertility. Plants need sufficient nutrients in proper balance for normal growth and development. Seventeen plant nutrients are essential for proper crop development. Each is equally important to the plant, yet each is required in vastly different amounts. Our understanding of nutritional needs of crop plants begin from the famous five year willow tree experiment conducted by J.B. van Helmont (1579–1644).

6.1. Etawah Pilot Project (1948)

Started in 1948 by Mr. Albert Mayer of USA at Etawah district in UP

Funded by the Government of UP.

6.1.1. Objectives

To know the degree of productive and social improvements, through self confidence and cooperatives

To find how quickly these results could be attained

To know whether the results remain permanent even after the special pressure is withdrawn

To assess how far the results were reproductive in other places.

The questions related to different series like perfect squares, perfect cubes, geometric, arithmetic, two stage types etc. are given to quantify the aptitude of the students. These series have a definite pattern and require to stressed upon the basic knowledge and aptitude of the candidates to find out the proper answer. The series may follow different pattern either additive, deductive or multiple based on earlier values given in the series. Some of the tips are given below for better understanding of the students and also these tips will help you to solve some of the ticklish questions.

Questions related to analogy ae simple to answer with application of little aptitude. Analogy means ‘similar items’. There is three types of Analogy, 1. Number Analogy, 2. Letter Analogy and 3. Word Analogy. In questions based on analogy, a pair of numbers/letters/words is given that have certain relationship between them. This pair is followed by a third numbers/letters/ words. The candidate is required to identify the relationship between the pair of numbers/letters/words given and find out the fourth numbers/letters/words such that the relationship between the third and the fourth numbers/letters/ words is similar to the relationship that exists between the first and the second numbers/letters/words. Similarly some figures are also given in questions and the next pattern of the figures is to be guessed. It requires candidate’s concentration and common wisdom. Therefore the candidates should be very attentive to answer these type of questions.

Successful crop production both in the rainfed and irrigated ecosystems depends on timely onset of monsoon, its distribution during the crop life cycle and collection of water in various storage structures viz; tanks, reservoirs and ground water table. It is therefore important that adequate supplies of water should be developed to sustain life. Development of water supplies should, however, be undertaken in such a way as to preserve the hydrological balance and the biological function of our ecosystems.

Consequently, the human endeavour in the development of water sources must be within the capacity of nature to replenish and to sustain. If this is not done, costly mistakes can occur with serious consequences. The application of innovative technologies and the improvement of indigenous ones should therefore include management of the water resources to ensure sustainability and to safeguard the source against pollution.

As land pressure rise, cities are growing vertical and in country side more forest area encroached and being used for agriculture. In India small farmers depends on monsoon where rainfall is from June to October and much of the precious water is soon lost as surface runoff. While irrigation may be the most obvious response to drought, it has proved costly and can only benefit a fortunate few. There is now increasing interest in the low cost alternative-generally referred to as “Rain Water Harvesting (RWH)”.

Water harvesting is the activity of direct collection of rainwater, which can be stored for direct use or can be recharged into the ground water. Water harvesting is the collection of runoff for productive purposes.

Rivers, lakes and ground water are secondary source of water. In present times, we depend entirely on such secondary source of water. In the process, it is forgotten that rain is the ultimate source that feeds all these secondary sources and remain ignorant of its value. Water harvesting is to understand the value of rain, and to make optimum use of rainwater at the place where it falls.

Fixation of elemental nitrogen in the atmosphere by the microorganisms through a reductive process into ammonia is called biological nitrogen fixation (BNF). Molecular nitrogen (N₂) is the major component (approximately 80%) of the earth’s atmosphere. The element nitrogen is an essential part of many of the chemical compounds, such as proteins and nucleic acids, which are the basis of all life forms. However, N₂ cannot be used directly by biological systems to build the chemicals required for growth and reproduction. Before its incorporation into a living system, N₂ must first be combined with the element hydrogen. This process of reduction of N₂ commonly referred to as nitrogen fixation (N-fixation).

N₂is transformed into reactive N via lightning discharge (5 teragrams (Tg) N / year; 1 Tg equals 1012 g) and by biological N fixation (100 -140 Tg N /year ). Conversion of dinitrogen to ammonia in the industrial process requires temperatures of 400 - 500^o C and high pressures (Haber-Bosch process). Biological nitrogen fixation is much more important as it contributes to more than 70 % of the input in to the world’s soil and water nitrogen. It has been estimated that 100 to 175 million tones of nitrogen are fixed annually by the process of biological nitrogen fixation.

The process of N₂ fixation is mediated by the enzyme, called nitrogenase (which reduces N₂ to ammonia). The overall reaction is as follows.

Trees have been used in cropping systems since the beginning of agriculture. Throughout the world, at one period or another in its history, it has been the practice to cultivate tree species and agricultural crops in intimate combination. In the tropics, human beings underwent a transition from hunting/gathering to the use of domesticated plants and livestock. As a part of the process, they cut down trees, cleared the debris by burning and sowed crops in the ash-enriched soil. It was the ‘slash-and-burn’ agriculture, a primary forerunner of the present-day agroforestry and a practice that might have originated in the Neolithic period, around 7000 BC.

There are innumerable examples of traditional land-use practices involving combined production of trees and agricultural species on the same piece of land in many parts of the world. Trees were an integral part of these farming systems and they were deliberately retained on farmlands to support agriculture. These practices are now known as agroforestry. However, the ultimate objective of these practices was not tree production but food production.

Introduction

Fermentation of food dates back to ancient practice of wine making. Fermented foods reflect culture and tradition of folklore and emphasis their close association with nature. Various methods employed for fermenting foods aimed in food preservation to reduce wastage; however lactic acid fermentation enhanced nutrition content and improved organoleptic properties. Experimental evidences on benefits on health and wellness on consumption of fermented foods are being reported. Fermentation process used for preparation of indigenous or traditional foods often depend entirely on natural microflora on the surface of raw material and containers used; Practices of fermenting foods are passed on as traditional know how to generations as a legacy. The fermented food manufacturers rely on commercial starter cultures, and highly reliant on indigenous materials as microbial collections are unique and highly variable according to region and products. Therefore, isolation of novel organisms, development of newer products and interactions are being explored using variety of fermented foods obtained through traditional processes

Introduction

Fermented foods and beverages comprise an indispensable part of the human diet. They can be generally defined as those foods and beverages produced via controlled microbial growth and conversion of various substrates using either enzymes or as whole cell itself, as shown in Figure 1.

4.1. What is pH?

pH is used to classify substance as acidic, neutral and alkaline, based on the prevalence of free H⁺ ions. Water molecules on autoionization dissociate to produce H⁺ and OH^- in equal number, although degree of dissociation is very small because of its stability (about one molecule in 10 million is ionized at any one time). H⁺ ions later attached to un-ionized water molecule to give rise hydronium ions, (H₃O)⁺

8.1 Introduction

For maximization of yield of crops, it is essential to provide irrigation to crops. When either the natural sources like rainfall, dew, snowfall and other forms of precipitation or when the capillary rise of groundwater is not sufficient to meet the crop water demand, then there is need to supply irrigation. This irrigation water is a precious resource and need to be used cautiously. There are three important things need to be understood for optimum utilization of irrigation water with basic purpose to maximize the yield and returns. 

1.1. Prologue

In present era, agriculture is a cause of global concern in the context of price volatility with a rising trend growing concerns for food security and resultant trade restrictions, global economic conditions in the recent past, the forecasted rate of reduction of growth of agricultural land over the next two decades, increasing mismatches between supply of agricultural products in relation to growing demand and the climatic changes which are wielding pressures on agricultural production. Thus, enhancing agriculture production and productivity have emerged as a global challenge. India, with 2.4 per cent of the world’s geographical area, is the largest producer of pulses, tea, and milk and second largest producer of fruits, vegetables, wheat, rice, groundnut and sugarcane in the world but supports about 16.2 per cent of the world’s population. Coupled with small scale land holdings and deep rooted poverty in rural areas, the magnitude and dimensions of challenges for agriculture policy-makers have increased manifold. So far as the agriculture sector in Odisha is concerned, it contributes only 15.6 percent in 2013-14 towards State Gross Domestic Product (SGDP), but provides employment and sustenance to more than 60 percent of the total workforce of the State. In this sense, the agriculture sector is still the mainstay of the economy of Odisha. According to the Economic Survey 2013-14 of Odisha, despite wide annual variations in its growth, the agriculture sector had grown at a rate of 12.72 per cent in 2012-13. However, a negative growth of 3.53 percent is anticipated during 2013-14 due to cyclonic storm Phailin and flash floods in the State in October 2013. The real per capita income of Odisha was Rs. 25,891 in 2013-14 which was around 65 per cent of All-India real per capita income of Rs.39, 961. According to the 68th round of National Sample Survey Organization (NSSO), the monthly per capita consumer expenditure (MPCE) for rural and urban Odisha is below the respective national averages. In the food and non-food consumption behaviour, an average Indian spends more than an average person in Odisha. In short, the above parameters pinpoint that the State of Odisha has been lagging behind the national economy & highlights the necessity of achieving higher growth on a sustainable manner across the sectors particularly the agriculture sector in order to uplift the society from underdevelopment & poverty. Though the contribution of agriculture to Net State Domestic Product (NSDP) has declined, the percentage of workforce engaged in agriculture has remained somewhat unchanged. This implies that there has been an overcrowding in agriculture without any noticeable increase in production.

Although thousands of plant species exist on the earth, only those that were found to be useful for humans as food, feed, fiber, timber and other utility materials have been selected for domestication. When these plant species were affected by various biotic and abiotic causes, the necessity arose to determine the ways and means of protecting the valuable plants species and to understand the host plant defense mechanisms and pathogenic potential of the microbial pathogens causing enormous losses to the cultivators. All plant species have built-in resistance to most microbial plant pathogens existing in the environment. Susceptibility of plants to some of them is an exception, since they are endowed with genes which effectively nullify the possible adverse conditions created by the microorganism. Likewise, microbial pathogens possess genes for survival and pathogenicity to survive in the absence of susceptible plant species and to successfully establish infection in suitable plant species. The microbial pathogens have evolved highly specialized tactics to overcome the defense responses and to rapidly multiply in plants for their survival and perpetuation in a geographic location / ecosystem

1. INTRODUCTION

According to the Food, Drug and Cosmetic Act (1968) food is “an article that provides taste, aroma or nutritive value”. The term 'health food' is generally used to describe foods that are considered to be beneficial to health beyond a normal diet required for human nutrition. Though, the term is not precisely defined by any regulatory agencies such as the US Food and Drug Administration (FDA) however, “Health food” is sometimes used as an umbrella term encompassing natural foods, organic foods, whole foods, and sometimes dietary supplements or may also refer to functional foods. The use of foods for promoting health and relieving symptoms is as old as the practice of phyto-medicine for treating or preventing various types of illness and have been documented in Hippocratic and Vedic texts and the canons of Traditional Chinese Medicine. Therefore, “Let food be thy medicine and medicine be thy food”, quoted by Hippocrates about 2,500 years ago, is certainly the tenet of today which is receiving overwhelming interest. In the recent years, rapid urbanization, industrialization, increase in per capita income etc. in developing countries like India, have resulted in dramatic lifestyle changes leading to lifestyle related diseases like coronary heart disease, obesity, diabetes, cancer and hypertension. The transition from a traditional to modern lifestyle, consumption of diets rich in fat and calories combined with a high level of mental stress has compounded the problem further.

6.1. Speed Detection of Pests in China for Phytosanitary Programme

Phytosanitary procedures such as pest detection and identification rely on technology. With the rapid development of science, it is necessary for national plant protection organizations to keep informed and to make diagnoses more sensitive and accurate. Previous general pest detection methods frequently have limitations for the diagnosis of quarantine pests. In the past ten years, China has conducted considerable research into how to improve its diagnostic measures and methods.

6.1.1. General Pest Detection Measures and Methods

Traditional determination of morphology by microscope is used mostly to detect fungi and adult insects. The morphological method may be used, for example, in the separate identification of wheat dwarf bunt (Tilletia controversa), wheat karnal bunt (T. indica) and wheat common bunt (T. tritici). On the other hand, it is hard to detect seed-borne pests using the morphological method.

Isolation culture is also used to detect fungi and bacteria in China. It is an effective method for detecting seed-borne disease or systemic infection. However, it takes a long time (more than 1-2 weeks). Inoculating the indicated plant (a healthy plant that is a host for the suspected pest organism) is used mainly to identify viruses. This was the principal and time-consuming detection method used before immunological and molecular biological methods were developed. Because viruses are very important kinds of quarantine pests of young plants, effective and rapid methods for detection were urgently needed.

9.1 Planning land use

Modern techniques such as mechanization, better crop varieties, and the scientific use of fertilizers can transform agriculture, but before they can be effective the use of the land has to be right. No techniques will make it possible to grow a good crop if the soil conditions are unsuitable for that crop, and no conservation works can prevent erosion when the basic cause is trying to grow crops on land which is really unsuitable for arable farming (plate 9.1). The object of land use planning is to determine the characteristics of land, its possibilities, and its problems, and try to match these to a form of land use which will be sustainable and economically productive.

9.7.1 Some planning principles

An often quoted definition is that ‘planning is the conscious process of selecting and developing the best course of action to accomplish an objective’. In the case of Land Use Planning the objective is the efficient intensive use of land resources.

It is difficult to imagine any field of human activity where some form of planning is not essential to achieve the objective. Consider going on holiday. Certainly it is possible to come home from work one evening, throw some clothes into a suitcase, go to the railway station or airport and buy a ticket to the first holiday resort which comes to mind. Some fortunate people may indeed enjoy so unplanned a holiday but for most of us it would be disappointing to find oneself in a mountain holiday resort without climbing boots, or on a sunny beach with only winter clothing in the suit case. No, one is more likely to achieve the objective of a happy holiday by a planned approach and this means going through a logical sequence of steps, i.e.

12.1 The nature of gully erosion

Gully erosion is spectacular and widespread, and so it is often used by conservationists as a characteristic symptom of erosion. As a result there is a danger of its importance being over-emphasized. Certainly it is most important as a source of sediment in streams, but in terms of damage to agricultural land or reduction of agricultural production, it is usually not very important for the simple reason that most land subject to severe gully erosion is of little agricultural significance. The really spectacular erosion so popular in non-technical reports shows large areas cut up by deep interconnecting gullies, but this situation is usually found in semi-arid climates unsuitable for any serious agriculture, or on soils which have such adverse chemical or physical properties that their potential production is very low. Added to this is the fact that gully control is always difficult and expensive, so the cost of reclamation usually exceeds the value of the land. Certainly in the sense of reducing the amount of eroded soil choking the dams and rivers it may be highly desirable to do something about gully erosion, but it is very much a case of prevention being better than cure. Limited resources in manpower, money and materials can usually be better employed in preventing future gullies than in curing existing ones.

The worldwide occurrence and recognition is well demonstrated in the variety of names: in English and American - gully, in Egypt - wadi, in South Africa - donga, in French-speaking lands - ravine, in India - nulla, in South America - carcava, or arroyo, and many others. The definition is the same in any case, a steep-sided eroding watercourse which is subject to intermittent flash floods. They are more common in semi-arid climates with infertile soils and sparse vegetation, but some spectacular examples are found in tropical forests in deep soils with dense vegetation.

1.1 Introduction

The word ‘horticulture’ was first used in 1600’s, and is derived from two Latin words, ‘hortus’(garden) and ‘cultûra’(cultivation), and it means ‘the culture (cultivation) of garden plants’. Relf (1992) defined “horticulture as an applied science and art of growing fruits, vegetables, herbs and spices, nuts, tubers, aromatic and medicinal plants, plantation crops, mushrooms and ornamental plants which include shrubs, flowering plants and turfs stimulating minds, spirits and emotions of individuals, enriching health and wellness of communities, and linking human beings to nature and its landscaped exteriors for wellness and wellbeing”. Fruits and vegetables are nourishing and protective foods. It has been recognized that fruits are a rich source of antioxidants which protect us from dreadful diseases. Vegetables and fruits contain vitamin E, K, and  carotene in addition to minerals like zinc, copper and manganese. To meet the ever-increasing demand of the country for fruits, vegetables, tubers, spices, flowers, ornamentals etc., we must strive hard to deliver better cultivars in as many aspects as possible to the society so that human beings will be in sound health physically as well as mentally. To achieve this goal plant breeding in general, and horticultural plant breeding in particular will come to our help.

6.1 Introduction

The process by which living beings give rise to the progeny of similar kind is called reproduction. Reproduction allows both multiplication and maintenance of a genotype/line/cultivar/species. So, the process of reproduction is also called propagation, and the plant part used for this purpose is called propagule. The way progeny originate is known as mode of reproduction (also called breeding system or reproductive system). The mode of reproduction of a crop determines its genetic composition which, in turn, is the deciding factor to develop suitable breeding methods. Knowledge of mode of reproduction is also essential for its artificial manipulation to breed improved types. The methods to be adopted for multiplication and maintenance of improved cultivars are also governed by the mode of reproduction. Especially in undertaking breeding investigations with new plants the nature of reproduction must be known before efficient breeding plans can be developed. The mode of reproduction has been well established for most of our important crop species.

6.2 Mode of Reproduction

Mode reproduction in crop plants may be sexual or asexual. In sexual reproduction (also called amphimixis), specialized reproductive cells called gametes are formed by the process of gametogenesis. Fusion of the male and female gametes leads to the development of an embryo and eventually the seed. In asexual reproduction, fusion of the male and female gametes does not occur, and new plants arise from unfertilized gametes (but not from zygote), or from specialized vegetative organs such as rhizome, tuber, bulb, corm, runner, sucker, stolon, bulbil etc., or by various artificial means of propagation such as rooting of stem and root cuttings, layering, grafting, gootee, etc., or tissue culturing.

1. Fruit : Types and their Classification

Fruit:The botanical definition of fruit is a seed-bearing part of a flowering plant or tree that can be eaten as food

or

Fruits are matured ovaries plus any associated flower parts and contain the seeds of the plant. The ovary may be subdivided into two or more carpels (then termed compound ovary) each bearing one to many ovules. Individual carpels develop into sections of a whole fruit, as with citrus where each familiar segment of the fruit represents one matured carpel. If the ovary is not subdivided, then it is termed simple. The ovules will mature into seeds if fertilized. Fruit has three parts.

Botanical Name: Elaeis guineensis Jacq.

Family: Arecaceae / Palmae

Chromosome No: 32

Place of Origin: Guinea Coast of West Africa

Common Name: Oil Palm

4.1 Introduction

The cultivated oil palm Elaeis guineensis Jacq. is a native of West Africa and exists in wild, semi- wild and cultivated forms. It was introduced as an ornamental crop in 1860 and planted at National Botanical Garden, Kolkata. Research on oil palm in India started during 1960 with the establishment of a research station at Thodupuzha by the Department of Agriculture, Kerala with Dura and Tenera germplasm imported from Malaysia and Nigeria. National Research Centre (NRC) for oil palm is situated at Elur, Andhra Pradesh. Oil palm crop is one of the highest oil yielding crops among all perennial crops. It gives 4 to 6 tonnes of edible oil/ha from 3 to 25 years of its life span compared to less than one tonne of oil per ha from other cultivated oil yielding crops. This oil palm is considered as golden palm due to its high yielding capacity. Among the 10 major oilseeds, oil palm is accounted for 5.5% of global land use for cultivation, but produced 32.0% of global oils and fats output.

Botanical Name: Hevea brasiliensis

Family: Euphorbiaceae

Chromosome No: 2n =36

Place of Origin: Amazon basin in Brazil

Common Name: Rubber tree, Rubber plant, Para rubber tree

11.1 Introduction

Rubber is a fast-growing tropical tree and mainly grown for the production of latex. In 1495, Columbus was the first person to report about latex. The latex was used for rub out pencil marks and this gave the product name as rubber. The latex is used for production of various rubber products. The most important application of latex rubber was initially accomplished in the 1880s when the rubber was used for making motor cars tyres. When rubber is heated with sulphur, it retains the physical properties.

According to Pasteur statements which one of the following is true

a) Living organisms discriminate between stereo isomers

b) Fermentation

c) Living organisms doesnít discriminate

d) Both a and b

6.1 Introduction

Urbanization is now a global phenomenon, but in developing countries the implications are more pronounced. Natural growth of population, reclassifications of habitation and migration trends are important in urban population in India. The population of India, which accounts for 27 per cent of the total population, was 285 million according to 2001 census. International experience shows that the pace of urban development accelerates when a country’s urban population crosses close to 25 percent of the total population (like in India).(Kumar and Chakrabarti, 2010). 

7.1. Developing Sector in Scientific and Technological Approach of Waste Management

From the very past, many traditional practices have been put into use for waste management like landfilling, composting, and recycling, which are practiced even today. However, the boundless upsurging waste compels the modern world to modify the traditional methods or to introduce innovative techniques with the grace of technology

10.1 Introduction

The consistent process of rapid urbanization and expeditious developmental activities have severely impacted the environmental components and thereby the quality of life. With limited natural resources, individuals and societies have to learn to bring in attitudinal changes in order to accomplish environment sustainability (UNESCO). From the Book “Our Common Future” (Brundtland Report), the concept of Sustainable Development can be understood as the “development that meets the needs of the present, but does not threaten the ability of future generations to meet their own needs”. 

A disaster is any event natural or manmade which creates an intense negative impact on people goods and services and or the environment and exceeds the affected community internal capability to respond prompting the need to seek outside assistance. In other words a disaster is a serious disturbance of a community or society interfere human resources losses and impacts on economically and environmentally or disaster means simply an event has unfortunate consequences on only on human but also on whole environment. Disaster can be two types’ Natural disaster and manmade disaster.