eChapters

Key Points

• Seizures are common in dogs and cats but uncommon in larger animals.

• Animal seizures can be induced by several circumstances.

• Idiopathic epilepsy is the leading cause of seizures.

• Rapidly rising core body temperature and metabolic alterations lead to fatal outcomes.

Introduction

A seizure is defined as any rapid and uncontrollable movement of the body induced by aberrant neuronal activity in the brain. Seizures are common in dogs and cats, but uncommon in larger animals. Seizures can be severe, affecting the entire body, or moderate, affecting only a section of the body. The pet may or may not be conscious or responsive, and it may urinate.

Seizures are usually brief (1-2 minutes) and self-limiting; however, some animals may experience protracted activity (more than 5 minutes). Seizures that persist longer than 3 to 5 minutes might cause serious complications such as pulmonary or brain edema. Death is caused by a sudden rise in body temperature and metabolic alterations that reach a life-threatening threshold.

INTRODUCTION

The origin of fish culture in India probably dates back to 2000 years. Possibly, fishery activity started when the human settlement moved away from the riverbanks to the hinterland. As the days went by, the Indian fish farmers practice their own indigenous technology as a common practice through natural resource management (National Commission on Agriculture, Gov. of India, 1976). The close and intimate observation of farmers through their age-old practices has developed the expertise of acquiring knowledge in aquatic ecosystem in particular. Admittedly, the multifarious knowledge and skill possessed by local people can substantially contribute to productive efforts and endeavors (Dasgupta, 1993).

Asia-Pacific Association of Agricultural Research Institutions (APAARI) Maliwan Mansion, 39 Phra Atit Road, Phra Nakorn, Bangkok 10200, Thailand

Selected ICT-enabled Agricultural Development Initiatives

• International Initiatives
• National Initiatives

Success Stories on Agricultural Information Systems

• South Korea’s Agricultural Information Service – A NARS Initiative
• ITC’s e-Choupal – A Private Sector Initiative

Lessons Learned on Secrets of Success

Extent of Adoption of Technology

Benefits and Impact at National and Regional Levels

Selection is an important tool for changing gene frequencies to better fit individuals for a particular purpose. It may be defined as a process in which certain individuals in a population are preferred to others for the production of the next generation. Selection is of two kinds

Buck can be mated to several does not gives many young ones. So quality of buck will be passed on to many number of young one. Choose bucks whose relatives have good commercial character performance can be known by looking at breeding record should have too well development testicle, have good growth, good healthy condition, not be too fat, good physical condition.

Best time is when animal is 2 kgs of body weight and age of 3-4 months.

It is advisable to purchase buck from good reliable source since it brings new characteristics and avoid inbreeding.

The mating of the buck of particular breed with die of another breed is cross breeding usually cross breeding has better commercial value → Hybrids which has hybrid vigour → grow faster, better litter size.

Usually breeding of 2 hybrid is not advisable because we will not be sure which hybrid characteristics will be passed on to young ones.

The back yard rabbitry has mixed breeding programme of low quality with reference to commercial characteristics. To improve back yard rabbitry, good well known breeding buck should be introduced to have better performance.

Rationally selected and contextually defined research problem is the foundation to the successful research project. If the selected research problem is not in line with the interests of the researcher, available time, resources, infrastructure & knowledge base then achieving success in research process remains highly uncertain. Consequently, in addition to hindering of professional growth of the researcher, it also results in wastage of time, money and human effort. Most importantly, it may sometimes add up incorrect knowledge into scientific base, hindering the process of scientific progress. Hence the identification of the research problem and designing the problem statement is the most important step in the research process.

21.1 Introduction

There are a number of field, vegetable, fruit and ornamental crops that are cultivated using asexual or vegetative parts such as stems, roots, modified flower etc. This is a heterogeneous group of plants and can be further categorized into four groups for ease in understanding the breeding methods applied to them. They are:

Group 1: Flowerless or Sterile

This group either does not bear flowers or if bears, they are sterile and do not set seed, e.g., ginger, mango ginger, turmeric, garlic, betel, many yams, etc.

Group 2: Apomicts

Apomixis has been reported in over 300 genera. But stable apomixis has been reported only in a few cultivated plants like meadow grass, citrus, mango, raspberry, etc.

Group 3: Flowers but Seed-Set Rare

In this group flowering takes place under specific situations but seed-set is limited, e.g., potato, sweet potato, sugarcane, etc.

6.1 INTRODUCTION

The ultimate success of an orchard enterprise largely depends upon the quality and genuineness of planting materials as nursery plants are the foundation of the orchard. Fruit crops, mostly being perennial in nature, call for utmost care in selection of cultivar, quality planting material and adoption of right technology for mass multiplication of planting material. Mistakes committed during the initial establishment of orchards cannot be corrected and will cause serious damage to production and productivity. The variation of scion-wood and rootstock has great bearing on the productivity of an orchard. Thus, it is of immense importance having all plants carefully labelled or otherwise marked. Cuttings taken from the mother plant will grow to have the same genetic qualities as the original plant. This is why the plants resulting from these cuttings are called “clones”. When a stem cutting is taken from a mother plant, the piece of stem will produce new roots if it is properly hydrated. Additionally, some plants can be grown from leaf pieces, or leaf cuttings and these will produce both stems and roots.

Thus, the progeny trees are the basic component for the multiplication of fruit plants and ultimately deciding the quality and productivity of the fruit crops. Hence, it is necessary to stock the true to type and best quality progeny trees.

In asexual methods of plant propagation, plant parts are being used as propagating materials. The plant from which the plant parts are collected is known as mother plant. There is every possibility of transmission of disease or pest which is present in the mother plant to the progeny. The mother plants have to be maintained properly to obtain disease free planting materials so that multiplication of disease/pest can be prevented. Thus, there is a need for the establishment of mother plant block/scion banks.

Principle

Cloning experiments would be very difficult if we do not screen those very few cells that took up the recombinant plasmid DNA, as the transformation efficiency is very low as stated before (usually less than 1 in 10⁵ cells). Hence it is necessary that there should be a selection mechanism (i.e. conditions where cells grow if they express a gene, but die if they do not) to sort out which are transformed cells and which are not make the job easy.

A commonly used selection mechanism is antibiotic resistance. If the E. coli strain used is not resistant to the antibiotic, but the plasmid DNA contains a gene coding for resistance, then only the cells that have taken up the plasmid will be able to grow. Most commonly used plasmids contain a gene for resistance to ampicillin; only cells that have taken up the plasmid will be able to grow and form colonies.

Note: Uptake of plasmid DNA is rare; hence each group of cells visible on a plate represents the offspring of a single cell that will contain a single molecule of plasmid DNA.

Selecting and adding fish to an aquarium is a crucial process that directly affects the tank’s ecological stability, visual harmony, and long-term success. Effective fishkeeping involves more than just choosing attractive species—it requires a thoughtful understanding of each fish’s behavior, tank needs, dietary preferences, and environmental compatibility.
When choosing fish, consider the aquarium type—whether it’s a community setup, a biotope, or a species-specific tank. Factors such as tank size and water conditions (including pH, temperature, and hardness) should guide your selection. It’s essential to know which species are peaceful (like mollies, tetras, and guppies) and which are known to be aggressive or territorial (such as bettas or cichlids), and
avoid housing incompatible fish together.
Proper stocking density is vital for tank health. Overcrowding can lead to water pollution, increased stress, and disease outbreaks, while too few fish may destabilize the biological balance. The general guideline of “1 inch of fish per gallon” works for small freshwater aquariums, but must be adjusted for fish size, waste production, and swimming habits. New fish should be introduced gradually, particularly in newly cycled tanks, to avoid overloading the filtration system. Quarantining newcomers is also advised to reduce the risk of introducing illnesses.
A well-planned fish selection and stocking strategy promotes a thriving, visually appealing aquarium that is stable, easier to care for, and more enjoyable to watch.
CRITERIA FOR SELECTION: COMPATIBILITY, SIZE, ACTIVITY
When choosing and stocking fish for an aquarium, it’s essential to consider compatibility, adult size, and behavioral traits. Compatibility ensures that fish can coexist peacefully, while size and activity level help prevent overcrowding and stress, contributing to a stable and healthy aquatic environment.

A primary objective of extension and development workers is to deliver presentations that are engaging, dynamic, and memorable for their audience. This objective can be most effectively achieved through the use of audio visual aids, which enhance the communication of knowledge and the teaching of skills. Extension teaching methods are defined as the tools and techniques that create environments conducive to the exchange of knowledge and skills between extension workers and their audience. Similarly, audio-visual aids play a significant role in enhancing the effectiveness of learning by facilitating the communication of knowledge and the teaching of skills.

People predominantly learn through seeing, hearing, and doing by looking, listening, and acting. Audio-visual aids provide extension workers with unique opportunities to enhance the effectiveness and clarity of the developmental concepts being conveyed. These aids allow learners to engage more fully with the material by seeing and hearing, thus fostering a deeper understanding. The success of extension workers and the progress made by their learners are largely dependent on the workers' ability to effectively communicate ideas. For progress and development to occur, it is essential that extension workers communicate clearly and that their learners comprehend the information. Audio-visual aids are crucial in this communication process, guiding learners through the steps of the teaching-learning process.

In light of this, the current unit discusses the important audio-visual aids that are beneficial in extension teaching, aiming to enhance your understanding of their application and impact.

Understanding Audio-Visual Aids

People's attention is captured by various senses in the following proportions: seeing (87.0%), hearing (7.0%), smell (3.5%), touch (1.5%), and taste (1.0%). Consequently, seeing and hearing are the primary senses involved in attracting attention and enhancing learning.

12.1 Introduction

Allowing certain plants from the population to reproduce, while barring others, comprises selection. This permission for reproduction may be granted by nature or by the plant breeder. In the other words, both nature and breeder exert selection pressure. Natural selection operates through differences of fertility among the adult individuals of parent generation as well as through differences of viability among the individuals of offspring generation. Artificial selection, i.e., the selection from action of the plant breeder in the choice of parents, produces its change of gene frequency by separating the adult individuals of parent generation into two groups, viz., the selected and the discarded, that differ in gene frequency. So, selection simply implies the retaining of desirable types or culling of unwanted or undesirable types.

Combining Ability Estimation
Crosses made in a definite fashion are a prerequisite for combining ability estimation. Estimated by half-sib (GCA) and full-sib (SCA) mating. Various steps like parent selection for crosses, performing crosses, their evaluation, and interpretation are involved while estimating of combining ability. For analysis of crosses, biometrical techniques like diallel analysis, partial diallel, and Line x tester analysis are used. If GCA variance is higher than SCA variance the importance of AGA & parent selection will be effective for the improvement of such traits. If SCA variance is higher than GCA variance there is importance of NAGA( dominance & epistasis) & Heterosis breeding may be rewarding. If GCA=SCA variance then AGA & NAGA are equally important in the expression of character, In this situation reciprocal recurrent selection may be adopted for population improvement.
Selection for GCA
General combining ability (GCA) is the average value of the inbred line based on its behavior in crosses with other lines. The mean performance of the line is expressed as deviation from the mean of all crosses.GCA is owing to the activity of genes which are largely additive in their effects as well as additive × additive interactions.

The selection of individual animals from a group is very important in a livestock farming business. While creating a herd, every farmer should buy animals from a trustworthy disease-free herd and learn as much as they can about the animals. Once the herd is established, the selection of gilts and boars for replacement in the breeding herd should be based on type and performance. The following are important criteria to consider while creating a healthy sow herd:

• Size of litters
• Strength and vigour of litters
• Milking ability
• Temperament

One of the objectives of experiments in cultivators’ field is to test technology for adoption in a targeted area i.e. NARP Zone, or a district. In that case interaction between district x treatment within a zone or between blocks x treatment within a district should not be significant. If the targeted area is a district, an experiment in cultivators’ fields must occur in at least two blocks. Also, if the targeted area is a zone, an experiment should occur in at least two districts in order to estimate interaction.

Analysis of cultivators’ field experiment

The on-farm trials were conducted in 25 villages on kharif rice during 1992-93. The treatments viz. T1-Farmers’ practice with local variety, T2-Farmers’ practice with improved variety, T3-Farmers’ practice with improved variety +recommended fertilizer and T4-Improved practice with improved variety +recommended fertilizer. Farmers level of NPK fertilizer was 40:0:0 and local variety was Suzata while recommended NPK fertilizer was 80:40:20.

General Selection Procedures for Dairy Breeds
Selection of Dairy Cows
Selecting a calf in calf show, a cow in cattle show by judging is an art. A dairy farmer should build up his own herd by breeding his own herd. Following guidelines will beuseful for selection of a diary cow. Whenever an animal is purchased from cattle fair, it should be selected based upon its breed characters and milk producing.
History sheet or pedigree sheet which are generally maintained in organized farmsreveals the complete history of animal.The maximum yield by dairy cows are noticed during the first five lactations. So generally selection should be carried out during First or Second lactation and thattoo are month after calving.?Three successive complete milkings has to be done and an average of it will givea fair idea regarding production by a particular animal.
A cow should allow anybody to milk, and should be docile.?It is better to purchase the animals during the months of October and November.?Maximum yield is noticed till 90 days after calving.

Choosing the appropriate construction materials requires evaluating their properties, cost, availability, and how well they suit the particular project. Common materials include concrete, steel, bricks, wood, stone, glass, and various plastics. Key specifications often considered are strength, durability, fire resistance, and environmental impact.
MATERIALS OF CONSTRUCTION FOR TRADITIONAL GREENHOUSE
Traditional greenhouses are built using a variety of materials that ensure durability, insulation, and protection for plants, while also allowing sunlight to penetrate. The selection of materials depends on factors such as cost, climate, and the greenhouse’s intended purpose. Here are some of the common materials used in constructing traditional greenhouses:
1. Wood: Wood has been a traditional and widely used material in greenhouse construction due to its affordability and ease of use. Treated wood, such as cedar or redwood, is commonly chosen for its resistance to decay and insects. Wood offers good insulation and stability, making it suitable for different climates.
2. Galvanized Steel: Steel frames provide exceptional structural support and are known for their strength and durability. Galvanized steel is coated to prevent rust and corrosion, extending its lifespan. Steel frames are capable of withstanding heavy loads and harsh weather conditions.
3. Aluminum: Aluminum frames are lightweight and resistant to corrosion, making them a favored choice for greenhouse construction. They are easy to assemble and require little maintenance over time.
4. PVC Pipes: PVC (polyvinyl chloride) pipes are cost-effective and simple to work with, making them ideal for smaller or temporary greenhouses. They provide a basic, lightweight framework that is easy to assemble.

Proper records can be maintained and individual performance can be noted.

Disadvantages: A number of males should be maintained which is not economical.

Advantages of polygamous mating: Economical because 1 male can be used for 4-5 females. We can use postpartum estrus effectively.

Immediately after parturition after 7 days they come to heat. Breeding can be done 7 days after parturition after separating the young ones. [Weaning age 21 days]

But this is usually not followed because the number of young ones born reduces subsequently.

Disadvantages: Proper records cannot be maintained.

Selection is a phenomenon of giving preference to certain individuals in a population to reproduce over other individuals that are deprived of the opportunity to reproduce. In common parlance, it is the process to choose individuals from the herd that are going to produce the next generation and influence the performance of the herd. Performance of a herd is guided by the genes of the parents. In a herd, males give rise to more off springs and hence selection of males is an opportunity to boost cattle husbandry. The contribution of males to the inheritance of polygenic traits is equal with that of females. Hence, it is central to pay equal emphasis while selecting males and females. Selection of sire is more important than dam selection due to numerous reasons. The first reason is that a sire produces more numbers of progenies compared to one dam. Since a sire is called “half the herd”, it determines the performance of the herd. Modern initiatives like artificial insemination and frozen semen technology has further extended the use of sire and highlights the importance of sire selection. Artificial insemination has allowed the superior traits to reach different corners of the globe and this has benefitted the present generation at large. Frozen semen technology together with artificial insemination is milestone to the field of genetics and breeding. It is now possible to

Seed is defined as a ‘matured ovule’ or a reproductive unit formed from a fertilised ovule consisting of an embryo, food store and protective coat. These essential constituents are common to all seeds in different groups of seed bearing plants. The knowledge of seed morphology is essential for artificial regener ation as it can influence the collection, processing, storage and treatment of seeds. The external and internal morphologies of seeds are stable. Therefore, they provide reliable criteria for the positive identification of unknown seeds.

Importance of Tree Seed

Farmers have been growing trees for different purposes for thousands of years. Tree species that are grown to provide more than one significant function are called multipurpose trees. These functions may be productive such as producing fuelwood, timber, fibre, fodder, food, medicine, etc. and/or protective such as soil conservation, shade, shelterbelt, microclimate amelioration, land sustainability, biodiversity preservation, etc. All trees are multipurpose; some, however, are more multipurpose than others. Tree species can be multipurpose in two ways.

1. A single tree can provide more than one function. For example, Gliricidia sepium is grown as living fences that provide fuel, fodder and green manure for agricultural crops - all at the same time.

2. Trees of the same species, when managed differently, can provide different functions. For example, Leucaena leucocephala is managed so that some trees will mainly yield wood while others mainly produce leaf fodder.

All animals with cataract are not suitable candidates for surgery. Pre-surgical assessment of a candidate is essential to make a safe judgement for surgical procedure to perform lensectomy. Failure in canine cataract surgery can be associated with poor case selection. A thorough ocular and physical examination should be performed to rule out other ocular diseases prior to cataract surgery. The cataractous lenses in both eyes must be mature to cause functional loss of vision. (24).

The following prerequisites should be fulfilled before cataract extraction is recommended (6):

1. The affected eye should have a significant visual deficit.
2. For the patient to regain vision, its retina must be healthy and functional. if the fundus cannot be examined thoroughly (because of the cataract), retinal function should be evaluated with electroretinography (ERG) to ensure that retinal degeneration is not present as the patient history, signalment, and the speed of pupil contraction

Phytochemicals from various parts of a plant or tree such as the leaves, the flowers, the seeds, the barks, the roots and the shrubs can be isolated. Once one comes in from collecting plants in the field, it is good idea to freeze them immediately in a freezer at – 20°C or a commercial freezer held at – 80°C (Kaufman et al., 1999). According to Harborne (1984, 1998), fresh plant tissues should be used for phytochemical analysis and the material should be plunged into boiling alcohol within minutes of its collection. Alternatively, plants may be dried before extraction.

Phytochemicals from various parts of a plant or tree such as the leaves, the flowers, the seeds, the barks, the roots and the shrubs can be isolated. Once one comes in from collecting plants in the field, it is good idea to freeze them immediately in a freezer at – 20°C or a commercial freezer held at – 80°C (Kaufman et al., 1999). According to Harborne (1984, 1998), fresh plant tissues should be used for phytochemical analysis and the material should be plunged into boiling alcohol within minutes of its collection. Alternatively, plants may be dried before extraction. It is essential that the drying operation is carried out under controlled conditions to avoid too many chemical changes occurring. Once thoroughly dried, plants can be stored before analysis for long periods of time. It is possible to isolate some of the compounds from herbarium samples. One example of the use of the herbarium material is the essential oil analysis that was carried out on type specimens of Mentha leaf, the material being obtained from the original collection of Linneaus made before 1800 (Harborne, 1998). An obvious point to follow by the research worker is freeing of the plant tissue under study from contamination with other plants. While collecting roots, care must be taken that we are collecting roots from one plant. It is essential to use plants which are free from disease, i.e. which are not affected by viral, bacterial or fungal infection. In phytochemical analysis, at some stage in the investigation, a botanist of an acknowledged authority must authenticate the botanical identity of the plants studied and a voucher specimen of the plant may be deposited in a reputed Herbarium for future reference. It is advisable to keep a logbook of the plants that have been collected and used for phytochemical analysis. A backup inventory on the computer is also a good idea.

Pump is a mechanical device to increase the pressure energy of fluid. Aquacultural enterprises often find it necessary to move fluid against an energy gradient. Most commo n may be filling or emptying of tanks. For performing an assigned job, the best selection of pumps should be such that it should work at its peak efficiency. Unfortunately, there is only one head and discharge condition for each pump where the peak efficiency is obtained and therefore, it is rarely possible to achieve the highest efficiency for a pumping condition. Manufacturers cannot design and build so many varieties of pumps to meet all operating conditions. They have therefore, settled upon some standard designs which are generally required for most of the head and discharge conditions.

Homoeopathic treatment is based on an overall understanding of the symptoms in the body and mind created by a sickness. Dr. Samuel Hahnemann, the founder of the homoeopathic science of healing, after years of experiment and trial, came to finding that symptom - similarity is the curative method of medically curable diseases. In paragraph 25 of the 'Organon of Medicine⁷, he formulated the principle of 'like cures like' in these words: " Now, however, in all careful trials, pure experience, the sole and infallible oracle of the healing art, teaches us that actually that medicine which, in its action on the healthy human body, has demonstrated its power of producing the greatest number of symptoms similar to those observable in the case of disease under treatment, does also, rapidly, radically and permanently remove the totality of the symptoms of this morbid state, that is to say, the whole disease present, and change it into health; and that all medicines cure, without exception, those diseases whose symptoms most really resemble their own, and leave none of them uncured."

The aforesaid indicates the importance of symptoms in the diagnosis and treatment in homoeopathy. If a drug creates a symptom during the course of proving, then it can be cured by a potencised dose of the drug; whatever may be the name of the disease. For instance, in proving GLONOINE produces a bursting, throbbing sensation in the head in a healthy person. Conversely any surging of the blood to the head requires GLONOINE. This can happen in a sun - stroke, in high blood pressure, in cerebro - spinal meningitis. KALI BICROMICUM produces in proving, a tough, stringy discharge of mucus. In homoeopathy, KALI BICROMICUM cures a similar discharge whether from the nose inwards from mouth, from fauces, from pharynx, from larynx, trachea, bronchi, vagina, and uterus or from any mucus membrane. CACTUSGRANDIFLORUS produces in pure form and gross doses, constriction of the heat and a constriction, anywhere in the body, which is like an iron band being tightened. The same sensation of constriction leads us to the use of CACTUS in a homoeopathic dose and it need not be confined to the heart. There can be constriction of the scalp, in the oesophagus, in the chest, in the abdomen, bladder, uterus, vagina or rectum.

The selection of the site has great importance for the establishment of a fruit orchard successfully. Establishment of orchard is a long term activity with huge investment. Hence, any mistake committed during site selection, it is difficult to rectify it later. Successful orchard is not only related with yield but also its economic production and efficient disposal of produce. For economic orchard establishment; some of the points which need to be considered, while selection of site. These are as follows.

1. Climate and soil: These are two important natural factors, which decide the success or failure of orchards. Before selection of site, climate and soil requirement for selected fruit crops needs to be studied thoroughly and accordingly site must be selected. On the other hand if a site has already been selected; then fruit crop selection needs to be done as per the existing climate and soil of that selected site.
2. Topography: Slope of site more than 15% makes the land almost unsuitable for cultivation. Land with 4% slope may be kept clean without much loss. Uneven land involves heavy expenditure in leveling. Southern slopes are generally warmer and affect the plant growth in a manner different from the northern slopes. It is due to the difference in quantum of receiving sunlight. Hence, the site with southern slopes may be selected for sun loving plants.

Farmers have been growing trees for different purposes for thousands of years. Tree species that are grown to provide more than one significant function are called multipurpose trees. These functions may be productive such as producing fuelwood, timber, fibre, fodder, food, medicine, etc. and/ or protective such as soil conservation, shade, shelterbelt, microclimate amelioration, land sustainability, biodiversity preservation, etc. All trees are multipurpose; some, however, are more multipurpose than others. Tree species can be multipurpose in two ways.

1. A single tree can provide more than one function. For example, Gliricidia sepium is grown as living fences that provide fuel, fodder and green manure for agricultural crops - all at the same time.
2. Trees of the same species, when managed differently, can provide different functions. For example, Leucaena leucocephala is managed so that some trees will mainly yield wood while others mainly produce leaf fodder.

Farmers can grow multipurpose trees (MPT) in various combinations with other crops, as in agroforestry, in block plantations of trees or in naturally regenerating tree farms. In certain cases, multipurpose trees are grown and managed for only one purpose. For example, Gliricida sepium is grown only to provide shade in coffee plantations. The same species may be planted in some other places and is managed differently for a very different use.

Farmers have been growing trees for different purposes for thousands of years. Tree species that are grown to provide more than one significant function are called multipurpose trees. These functions may be productive such as producing fuelwood, timber, fibre, fodder, food, medicine, etc. and/or protective such as soil conservation, shade, shelterbelt, microclimate amelioration, land sustainability, biodiversity preservation, etc. All trees are multipurpose; some, however, are more multipurpose than others. Tree species can be multipurpose in two ways. 1. A single tree can provide more than one function. For example, Gliricidia sepium is grown as living fences that provide fuel, fodder and green manure for agricultural crops - all at the same time. 2. Trees of the same species, when managed differently, can provide different functions. For example, Leucaena leucocephala is managed so that some trees will mainly yield wood while others mainly produce leaf fodder.

Farmers have been growing trees for different purposes for thousands of years. Tree species that are grown to provide more than one significant function are called multipurpose trees. These functions may be productive such as producing fuelwood, timber, fibre, fodder, food, medicine, etc. and/or protective such as soil conservation, shade, shelterbelt, microclimate amelioration, land sustainability, biodiversity preservation, etc. All trees are multipurpose; some, however, are more multipurpose than others. Tree species can be multipurpose in two ways.

Background

Sheep and goats are the poor man’s cow because of the lower capital investment, and production costs. Also supplies milk quantities that are suitable for immediate household consumption thereby reducing problems of milk storage and marketing. Small ruminants, goats and sheep, mainly localized in the arid, semi-arid and mountainous areas of the country, have multi-faceted utility in terms of wool, meat, milk, skins, (mo)hair/pelts, manure and have also acquired socio-cultural niches in many communities (Kosgey and Okeyo, 2007). Goat and sheep milk has many advantages over other livestock species’ milk being easy in digestion, non-allergic, naturally homogenized, improves immunity as it has antifungal and anti-bacterial properties. However, rearing small ruminants for meat is more popular among farmers as price of chevon and mutton are very high, continuously increasing over the years and sale of male for meat is easy, steady and accessible at farmer’s place or local places unlike milk, skin and fibre. Thus, small ruminants (SR) occupy a promising agrarian and economic niche in low to medium input production systems, not suitable for growing crops and dairy farming (Devendra and Chantalakhana, 2002), mostly driven by small and marginal farmers and landless laborers. Their meat and milk production represents 4.8% and 3.4% of the total meat and milk produced, respectively, in the world.

3.1 Selection of Breeding Bulls

A sire is called half the herd and the breeding bulls to be used for semen production should be carefully selected. Selection of superior sire for breeding purpose is very important for the success any livestock breeding programme. Therefore, breeding sire must be carefully selected and maintained in scientific way so that its breeding life is prolonged and maximum number of frozen semen doses can be produced from it. 
The selection criteria for future bulls should be meticulously designed keeping into account all the factors/parameters which affects the breeding programme. The selection of breeding bulls is based on three broad parameters-

3.1.1 Pedigree Examination
3.1.2 Gross Physical Examination
3.1.3 Laboratory Examination

Natural Selection
In nature, the main force responsible for selection is of interest because of its apparent effectiveness and because of principles involved. Some of the most interesting cases of natural selection are those involving man himself. All races of man that now exist belong to the same species, because the races are interfile or have been in all instances where mating have been made between them. All races of man now in existence had a common origin and at one time probably all man had the some kind of skim pigmentation – which kind we have no sure way of knowing. As the number of generations of man increased, mutations occurred in the genes affecting pigmentation of the skin causing genetic variations in this trait over a range from light to dark or black.
Natural selection is a very complicated process and many factors determine the proportion of individuals that will reproduce. Among these factors are differences in mortality of the individuals in the population especially early in life, differences in the duration of the period of sexual activity and in the degree of sexual activity itself and the differences in the degree of fertility of individuals in the population. They are also examples of adaptive evolution.

Introduction

Aquaculture is one of the rapidly growing industries worldwide with more than 300 different species being cultured. However, majority of aquaculture species are still wild and undomesticated, and the adaption of relevant technologies in the aquaculture sector has been slow. Given that genetically modified stock only accounts for less than 10% of the current global aquaculture production, the aquaculture sector has significant potential to increase production efficiency through selective breeding programmes. Selective breeding is acknowledged as a crucial element in the generation of resource-efficient, sustainable, and profitable aquaculture operations (FAO, 1995; World bank, 2006).

ABSTRACT

Apot culture experiment was conducted on tomato with cadmium and lead to identify the selective retention sites of the metals. For this a completely randomized design with five treatments and four replications were laid out at the College of Horticulture, Vellanikkara. The different levels of treatment ranged from 0.5 to 2.0 mg kg -1 soil. Cadmium and lead were directly supplied as a water-soluble source through cadmium chloride and lead nitrate respectively. In tomato the growth and fruiting was permitted only at lower levels of cadmium application. At 1.5 mg kg-1 soil, fruiting failed. While at 2.0 mg kg-1 soil, the very establishment of plant was totally affected. At higher levels of application, cadmium preferred to get accumulated in roots while on the contrary at lower levels, cadmium uptake increased in shoots than in roots with the least content of the metal in fruits. However, in the case of lead, all levels of application in soil permitted growth and fruiting. With increase in rate of lead application, significant selective retention was observed in roots (1.48-6.69 ppm), shoot (0.29-1.62 ppm) and fruits (0.39-1.45 ppm). On comparison of retention sites of lead in tomato, it could be seen that fruits maintained the maximum lead uptake (637.2-2933.0 mg pot-1). Hence, the consumption of such tomato fruits contaminated with heavy metals may result in kidney damage, lack of memory, dissolution of phosphorus in the bones etc.

Introduction
India with exceeding population of 1027.01 million with 741 million living in rural areas is on the path of development. The lack of access to and control over resources is said to be cause of poverty (Satapathy and  Mishra, 2011).
Women form half of our society. They have significant role in overall development. Rural development concept in our country attaches more importance to women empowerment. To combat poverty ‘self help promotion’ is of recent paradigm that has attracted attention to sections of the society.

Origin and Concept of SHGS
    
The origin of SHGs is from the brainchild of Grameen Bank of Bangladesh, which was founded by Mohammed Yunus.  SHGs were started and formed in 1975.  In India NABARD is initiated in 1986-87.  But the real effort was taken after 1991-92 from the linkage of SHGs with the banks.  A SHG is a small economically homogeneous affinity group of the rural poor voluntarily coming together to save small amount regularly, which are deposited in a common fund to meet members emergency needs and to provide collateral free loans decided by the group (Jha 2000).  They have been recognized as useful tool to help the poor and as an alternative mechanism to meet the urgent credit needs of poor through thrift (Rao 2002) SHG is a media for the development of saving habit among the women (Rajamohan 2003).  SHGs enhance the equality of status of women as participants, decision-makers and beneficiaries in the democratic, economic, social and cultural spheres of life.  (Jain 2003).

The most important aspect of Bandura’s theory that has received most attention in recent research is his concept of self-efficacy. This theory emphasizes that an individual’s belief that he or she can perform some behavior or task successfully. If a person can expect to do well in some tasks, his self-efficacy is high, but if he has some doubts about his performance, then his self-efficacy is lower. Self-efficacy has been found to play a role in success in many tasks and personal happiness, and life satisfaction.

The concept of self-efficacy lies at the center of psychologist Albert Bandura’s social cognitive theory. Bandura’s theory emphasizes the role of observational learning, social experience, and reciprocal determinism in the development of personality. According to Bandura, a person’s attitudes, abilities, and cognitive skills comprise what is known as the self-system. This system plays a major role in how we perceive situations and how we behave in response to different situations. Self-efficacy plays an essential part in this self-system.

Introduction

Since six decades after independence, the existence of people in a state of social, economic, political and knowledge disempowerment is considered as major threat to overall development. There is an essential demand for the integrated development, which should cover up development in all aspects, specifically in status, equality, security, complete physical, mental and social well-being of the target group. One sided emphasis on economic achievements by policy makers has set in motion so for But the social cleavage in rural areas has deepened. The power to the people signifies a new movement, which has been born out of the realization that society’s traditional arrangements for voicing their problems are very meager. The economic growth does not mean that only creation of wealth, but also creation of people’s capacity to create wealth and this resides in their health, education, knowledge and skills. It has been proven fact that, the economic development in any country should be preceded by social development which is interdependent. To combat the poverty at present juncture, efforts should be through the group approach only. So the new paradigm like Self - Help Groups (SHGs) can attain sustainability because of the clear cut understanding among them. Almost failure of co-operatives to mitigate unemployment problems and combating rural poverty, it is essential to think over self help group approach to empowering the rural poor.

Self incompatibility in plants is a mechanism preventing the seed set by self pollination, and is probably way in which out crossing is enforced. Other factors may cause selfed seed may not to set seed due to embryo abortion, but SI is prezygotic and prevents embryo formation. SI is, therefore prevention of fusion of fertile male and female gametes after fertilization. Koelreuter first time in 18^th century reported S.I in Verbascum phoeniceum plants. In self-incompatible pollen grains fail to germinate on the stigma of the flower that produced them. Self incompatibility has been reported in more than 300 plant species belonging to 70 family of angiosperm. It is important out breeding device (cross pollination) for normal fruit set. It is maintained high degree of heterozygosity and can take place at any stage between pollination and fertilization.