eChapters

1.    UV irradiation is considered better than other irradiation methods in terms of

(a) Physical structure maintenance

(b) Chemical structure

(c) Sensory quality

(d) Microbial quality

2.    Irradiation with UV light is considered as

(a) Sterilization method

(b) Disinfection method

(c) Pasteurization method

(d) Cooking method

3.    UV treatment kills bacteria, viruses, fungi due to its effect on

(a) Metabolic pathway

(b) DNA

(c) Signaling pathway

(d) ATP generation

4.    Effectiveness of UV radiation on micro organisms depends on

(a) Species and strain

(b) Spore formation

(c) Culture and growth

(d) Both (a) and (c)

Key words : Flood Plains Agro-ecosystem, GIS, RS, Spatial Cropping Pattern, Radiometric Normalization, NDVI, Agricultural Systems.

Introduction

Of late, evidence is accumulating to suggest that high productivity and growth rates achieved during the Green Revolution era in the well-endowed regions of the country (i.e North West India) are no longer being sustained to meet the needs of still increasing population in the country. Past growth sources have nearly exhausted and there is also no scope for expansion of crop land. Indeed pressure for competing land uses will likely reduce area under food grain crops. Shrinking natural resource base (per capita availability of land and water devoted to agriculture), declining quality of resources and environmental degradation issues will imply increasing threat to our ability to meet the basic needs of the growing population of the region unless we shift our effort to potential regions like flood plains of the country for improving productivity.

The flood plain riverine lands of India covering approximately 42 m.ha though most endowed with natural resources and has all the potential of becoming rich, is still economically backward. The reason behind this paradox of extent of poverty in the midst of richness of resources is that the natural resources of the region are not being productively harnessed into the process of the economic development and thus are not delivering their potential and commensurate benefits to the people. The Green Revolution technologies evolved during of 60’s and 70’s had little or no impact in this region of the country. Undesirable spatio-temporal distribution of flood in these areas keeps agriculture under uncertainty and risks. These are also the areas where the poorest are concentrated and agriculture largely continues to be more of subsistence. The nature of agricultural problems are highly variable due to great diversity in the production system as also in the socio-economic conditions of the communities requiring location specific approaches to address the problems and enhance the productivity.

INTRODUCTION

Rabbit production is the upcoming livestock farming throughout the world. The domestic rabbit are raised meat, fur –skins and wool. Climatic condition of Karnataka are not favourable for raising wool breeds of rabbits, but are definitely well for broiler rabbit production.

Rabbits require less space for housing and highly prolific. Initial investment for rabbits farming is very less and maintenance cost is also very low. There is no religious barriers in rabbit meet consumption and rabbit meat contains very low cholesterol when compared to the other meats.

Rabbit farming can be very well fit into mixed farming systems. It can be adopted by small and marginal for maximum utilization of lands and resources, and to derive substantial income under rural condition.

About Mendel

Born in what is now the Czeck Republic.

Grew up in an agricultural environment.

Became a priest-teacher at a local monastery.

Took courses in botany, physics, and mathematics at the University of Vienna.

Gregor Mendel was the first person to comprehend some of the most basic principles of genetics. He reached these understandings in the mid-nineteenth century; working in what is now the Czech Republic and using as his experimental subjects a species of garden pea, Pisum sativum..

Carried out “hybridization” experiments with the common garden pea.

Mendel’s hypotheses became the laws of inheritance in modern genetics.

Mendel’s work re-discovered by Correns, DeVries, and Tschermak in 1900. Period of modern “Mendelian” genetics begin.

Linkage and Crossing Over

Crossing over may produce recombinant phenotypes.

Bateson and Punnett discovered two traits that did not assort independently.

Morgan provided evidence for the linkage of several X-linked genes and proposed that crossing over between X chromosomes can occur.

A chi square analysis can be used to distinguish between linkage and independent assortment.

Creighton and McClintock correlated crossing over that produced new combinations of alleles with the exchange of homologous chromosomes.

Crossing over occasionally occurs during mitosis. Genetic Mapping in Plants and Animals

The frequency of recombination between two genes can be correlated with their map distance along a chromosome

Alfred Sturtevant used the frequency of crossing over in dihybrid crosses to produce the first genetic map.

Trihybrid crosses can be used to determine the order and distance between linked genes.

Interference can influence the number of double crossovers that occur in a short region.

1. OVERVIEW OF THE NATIONALAGRICULTURE SCENARIO - NATIONAL EXTENSION SYSTEMS, SCOPE AND IMPORTANCE

Like in many developing countries, Agriculture Sector being the backbone of the Sri Lankan economy, contributes significantly (11.3 per cent in the year 2007) to the Gross Domestic Products (GDP) and the economic growth by 7.7 per cent (Central Bank of Sri Lanka, 2007). As to the situation in 2007, 80 per cent of country’s population of 20.01 million is rural and 31.3 per cent of the total Sri Lankan work force is employed in Agriculture sector. Nearly 14.6 per cent of the population still depends on the agriculture as the main livelihood. The country’s GDP has been growing at 6.8 per cent per annum (in 2007), though that of agriculture is growing at only 3.3 per cent.

Country as a whole is constituted by 25 administrative districts all of which is encompassed into nine provinces. Of these, nearly four fifths are predominantly agricultural districts with over 60 per cent of the total population living in them. Majority of the population in these districts constitutes the farming community and they, by and large, are the ones who keep the nation feeding. Apart from plantation agriculture which looks after large scale plantation level crops like tea, rubber, coconut along with other crops like cinnamon, pepper, coffee, cloves, nutmeg etc., grown extensively for the export market, almost all other food crops are grown by farmers, majority of who own land plots less than 2 hectares. On the one hand, this makes agriculture mainstay of a major sector of the population and on the other hand they are spread nearly everywhere in the country rather thinly on the ground.

7.1. Rice

• Treatment of paddy seeds in diluted bio gas slurry for 12 hours increases resistance of seedlings to pests and diseases.
• During panicle formation in paddy, the flowers of Cycas circinalis are placed on sticks in paddy fields @ 4/ac. Its unpleasant odor repels ear head bugs.
• About 30 kg of tamarind seeds are applied for an acre of paddy field 1 day after transplanting to boost up the crop growth and yield.
• Soaking the paddy seeds in diluted cow’s urine before sowing, considerably reduces the incidence of leaf spot and rice blast
• Presoaking of paddy seeds in milk increases its resistance against ‘tungro’ virus and ‘stunt’ virus
• For control of red leaf spot disease in paddy, the seeds are soaked in ‘Pudina’ leaf extract (Mentha sativa) for 24 hours
• ‘T’ shaped bamboo stands are placed in many places in the paddy fields so that birds can sit on them and feed on the larvae and adults of rice pests.
• Sowing on eighteenth day (Aadipperukku) of Tamil month Aadi (Jul-Aug.) ensures good harvest.
• Daincha (Sesbania spp.) seeds are sown on paddy main fields when paddy nursery is raised and the grown up daincha is ploughed in-situ during field preparation.
• Plough the main field for four to six times for better yield.

Abscission: The shedding of leaves, flowers or fruits as a result of formation of layer of loosely adhering cells at base that breaks apart readily.

Accent: It is created in the garden to avoid the monotonous view. Mostly unusual object like tall fountain, tree, statue etc are used to create the effect

Acre: A unit of measurement of land area equivalent to 4840 square yards or 0.4047 hactare.

Acropetal: Developing sequentially from basal to the apical position.

Acrylic: It is a glassy thermoplastic that is incorporated in rigid plastic to enhance wither ability.

Aestivation: The use of high temperature to promote flowering.

After-ripening: Physiological changes that take place within a dormant seed or bud during dormancy or It is a type of embryo maturation which enables germination of seeds.

The various unit operations of food process engineering applied to solve the problem of changing the compositions of solutions, mixture and solids. Often these operations must be conducted on large scale to meet the demands of a large manufacturing plant. In food processes engineering these operations are often referred to as separation / concentration / extraction / purification process. Usually these operations are directed towards separating substances into its component parts or concentrating a particular substance from another.

Abstract

Functional foods and nutraceuticals are one of the fastest-growing segments of the food industry. The demand for these foods is driven by health conscious consumer and the growing awareness of the close connection between diet and health, particularly in relation to chronic diseases. Over the past five years (20082012), the Indian Nutraceuticals Market has been growing at a rapid pace and is expected to rise to US $ 5 billion by 2015. The rapid growth and development of this new industry combined with the need to protect consumer health and interests, has led to the evolution of a myriad of different regulatory frameworks and policies across multiple markets. Japan was one of the first countries to recognize a different category of healthier food products. The Japanese government formally accepted this category in the 1980s. Other developed countries viz. The EU, The US, Canada etc also regulated this sector during 1990s. In India, the Food Safety and Standards Act 2006 (FSSA) was enacted in 2006 in response to pressure from stakeholders and the food industry, transforming the regulation of food in India. Punjab state, with abundance of food grains and increasing trends in fruits and vegetables, provides options for both the producer and growth promotion in the nutraceuticals sector through partenship between research centers, private entrepreneurs and indigenous communities. Regulatory frameworks should focus on the protection of consumers, promotion of fair trade and innovation in the sector. This paper discusses functional foods and nutraceuticals as per food regulations prevalent in various countries and highlights how these regulatory frameworks play a major role in transforming the food sector.

Rock gardens and pool are two most attractive features of the garden. These together can transform any part of the garden into a pleasing spot. Both are quite different from other common features and increase beauty of the gardens in manifold.

Rock Garden

The term rock garden refers beautification of a portion of the garden in combination with rocks and plants. Rock garden provides height and a rugged grandeur. A flat area can be converted into an elevated and graded one in combination with rocks and plants. This breaks monotony of the plain land and creates a feature of interest. The plants grow in the rock garden are different from others and add variety to the existing groups.

Different diagnostic tools are designed to avert nutrient deficiency or sufficiency and if properly used both loss of yield and quality of crop can be minimized. Among several diagnostic tools, nutrient analysis of standing crop seems to be an efficient method in arriving at the need-based fertilizer scheduling for various crops.

Nutrient uptake by plants indicates the actual accessibility of nutrients in soil to the plants. Also, concentration of certain heavy metals in plant indicates their solubility in soil which leads to poor crop quality.Although, different plant species and even different varieties of same species may differ in their nutrient requirements, the concentration of nutrient element in plant can act as guide to support the soil test result in assessing nutrient supplying capacity of a soil and as a tool for correcting any deficiency if carried out early enough to prevent yield loss. However, analysis of harvested or mature crop is like a post mortem as this information only can help in nutrient management planning in subsequent years.

Like soil testingplant analysis also suffers from some limitations. Amongthem, the most important are the risk of sampling error as well as the chances of incorrect interpretation of test report in recommending fertilizers. Selection of right plant part and right stage of crop growth are very crucial for successful plant analysis.

The essential nutrients and their function in microbial cells

1. INTRODUCTION

Many food components are encapsulated and stabilized by nature inside plant cells, but, with the growth in use of functional ingredients and product fortification with vitamins, antioxidants and nature-identical synthetic compounds, there is a need to stabilize and protect these ingredients from the rigours of processing and degradation during storage.

Many food products whose development was thought to be technically unfeasible are possible today because of the wide availability of encapsulated ingredients. Such ingredients are products of a process that totally envelops the ingredient in a coating or ‘capsule’ thereby conferring many useful and otherwise unusual properties to the original ingredients.

Encapsulation is a technique that is applied to preserve and/or protect numerous ingredients. In the flavour industry, the encapsulation process is used chiefly to convert liquid flavour materials to free-flowing, dried powdered products. In a broad sense, encapsulation technology includes the coating of minute particles of ingredients (e.g., acidulants, fats, and flavours) as well as whole ingredients (raisins, nuts, and confectionery products) that may be accomplished by microencapsulation and macro-coating techniques, respectively.

In recent years, there is gradual realization of the role of women in the field of agriculture & allied areas. Besides domestic work, they are involved in various types of field works relating to production of crops, milk, fish meat, egg, mushrooms & honey bee and other material. Employees in agriculture sector of the country, contributes nearby 80% of all economically active women (Bhatt, 2013). Therefore, rural India is now going through a process of “Feminization of Agriculture”.

Women are critical to the well-being of farm households. Besides child bearing and rearing, women are expected to prepare all meals, maintain the household jobs and assist in crop and animal production. Perhaps, ironically, it is because women who have so many responsibilities that they have been over-looked by agriculturalists and policy makers–it has been more convenient to label men as farmers and women as child raisers and cooks. Rural women form the most important productive work force in the economy of majority of the developing nations including India.

In spite of several efforts there still exists gender gap in the field of agriculture and allied areas. Closing the gender gap is not only the right thing to do; it is the smart thing to do for improved agriculture and food security for all. This was a key message for family farming interventions to close the gender gap.

World wide women play a major role in agriculture; including fisheries, forestry and livestock production. The nature and extent of their involvement is different in various agro production systems. Their role is diversified from management to landless labourer. In overall farm production, on an average women’s contribution is estimated at 55 to 66 per cent of the total labour (Singh, 2013).

Introduction

In India about 8.6 per cent of population enlisted in the category as ‘Scheduled Tribes’ under Article 342 of the Constitution of India, but they constitute almost 16 per cent of the poor. Lakshadweep is the most populous state with respect to proportion of tribal to total population (94.8 per cent) whereas, in Uttar Pradesh tribal population is lowest with only 0.6 per cent of the total. In Odisha tribal constitutes 22.8 per cent of total population. In India literacy rate of tribal is 59 per cent as against that of general category is 69 per cent. Tribal people are observed to be strongly associated with the forests, hills and remote areas, practising a unique life style, having a unique set of cultural and religious beliefs. Over the generations these communities have evolved time tested farming systems, which are purely subsistence in approach and are keeping pace in perfect harmony with nature. Over the recent few decades, however, population growth and lack of harmony between different agriculture and developmental policies have threatened these traditional agricultural systems for extinction. The encroachment of local Governments and private interests on forest and mineral resources has pushed the tribal groups on to increasingly degraded land, thus their survival became a constant struggle.

The primitive societies have passed through several stages of economic development everywhere in the world. Thus one can find the stages of food gathering, hunting and fishing, farming, etc. among the Indian tribes. The tribes living in the forests and hills usually earn their livelihood by means of food gathering, hunting and fishing. Such is the life of Kadar of Kerala, Birhor and Kharia of Bihar and other tribes. The tribes living in dense forests, full of wild beasts, live on hunting, such as the tribes of Naga, Kuki, Bhil, Santhal and Gond. The hunters leave the females to carry out household activities in the morning and return in the evening after hunting. In some tribes there is a usual custom of hunting collectively. The Nagas use spears, arrows and bows. The Bhils are very much specialized in shooting by arrow. The tribes living near rivers and seas usually earn their livelihood by catching fish. The hilly tribes rear the cattle, an example of which are Goojars and the tribes of Chamba. The Todas of Nilgiri rear buffaloes. Some tribes also carry out cultivation, but they are generally shifting from one place to another. So shifting cultivation is an intrinsic part of tribal system and tradition. Among the cultivating tribes are the Santhals and Gonds. Tribal groups mostly do not have land ownership and have a limited option to adopt agricultural operations in forest areas. Considering their sustenance Government of Odisha has passed an Act “Schedule Tribes and other forest dwellers Forest Right Act” in 2006. It permits ownership of tribals on forest land up to 4 ha. for forest use and subsistence agricultural activity without any penalty. Cottage industries, such as weaving cloths, preparing ropes and skins and utensils of different metals are prevalent in many tribes. The Kharia people are very much specialized to cottage industries. Their living standard is very poor in spite of their hard work.

Agro-inputs are either biological or chemical or inorganic compounds used in the production of agricultural and allied products. Some of the agro-inputs used in India are :

• In-organic fertilizers
• Pesticides which include insecticide, fungicide, nematicide and herbicide
• Seeds which include varieties, hybrids and genetically modified plant materials
• Vegetatively propagated planting materials
• Bio-fertilizers
• Organic inputs which include compost, vermicompost, enriched farm yard manure, oil meals and farm yard manure
• Bio-pesticides
• Bio-control agents
• Plant Growth regulators
• Micro-nutrients
• Farm machinery and agricultural tools and implements
• Animal feed
• Poultry feed.

The production and distribution of above mentioned agricultural inputs create agri-business opportunities. The agricultural input production inputs and distribution firms may be big companies like Madras Fertilizers, SPIC, FACT, EID Parry, Monsanto, Syngenta or MAHYCO and the like. They may also be small business firms like vermicomposting, coir pith decomposing.

Output of dairy products from animals, output from the poultry, goats, sheep, exotic birds, animal growth, their living environments and diseases affecting them, are known to be governed by weather conditions. Development of quantitative climate-animal relationships and efficient utilization of daily weather data for monitoring the various aspects, continues to be a significant research priority. Traditionally the major climatic factors on which attention has been focused are: temperature, humidity, solar radiation and length of day. The effects of these climatic elements on reaction of animal physiological parameters have been studied by measurements of (a) animal?s ability to prevent heat loss by such means as increased evaporative cooling from the body surface, (b) its ability to reduce heat production by lowering its metabolic rate through more efficient energy utilization (c) its ability to put up with a rise in body temperature or with the consequences of compensatory reactions. Experiments are usually done in climate chambers since field measurements often involve difficulties of interpretation in separating out the effects of climate from those of nutrition. Water consumption, water intake, insensible perspiration (diffusion moisture, different from the moisture which is actively secreted), protein intake, intra- and extra cellular volumes, plasma and blood volumes, body temperature, respiratory activity etc., of animals are all known to be affected in relation to changes in air temperature and humidity. Airflow also is an adjutant factor since it affects temperature and humidity. Significant seasonal changes have also been frequently recorded. These in turn, have profound effect on output of milk yield and several other animal products. Development of predictive techniques for assessment of milk yield or other products had been recognized as a thrust area, so as to develop suitable and viable strategies for storage; transport, marketing and distribution of several livestock products. Several gross relationships between climate and its influence on physiological and biochemical aspects of animal behaviour have been worked out in the past on seasonal basis but a more intensive study on short period stress effects on the output products in relation to prediction of output is the need of the hour. For pursuing research on these aspects, an appropriate understanding of the specific meaning and use of terminology such as ?thresholds?, ?optima?, ?normal?, ?extreme events? in more detail is considered appropriate. Methods of analysis also need to be addressed and evolved.

The sole science of meteorology is to deal with weather forecasting while livestock advisory based on weather forewarning is dealt with multidisciplinary approach in the field of livestock meteorology for the benefit of the livestock farmers. In this context, the current status of livestock advisory based on medium range weather forecasting is highlighted so that the tools for livestock advisory can be initiated and developed by the concerned for the benefit of livestock farmers in similar lines. Information on weather forecasting is used in various society linked sectors and animal husbandry component is one of them (Fig. 17.1).

7.1 Introduction

The practice of rainwater storage in the pond is quite common but still there is a need to improve its design. Most of the ponds used for rainwater storage are designed on thumb rule: either they are under or over designed. An over designed farm pond can meet the supplemental irrigation needs of the crop but it may not be economical. On the other hand, an under designed pond though economical, may not be able to meet the irrigation needs of the crops at all times. It is reported that in some case up to 20% of the farm area is used for construction of farm pond. These farm ponds are found not to be optimal. Although these ponds are able to meet the crop water demand at most of the stress periods, but considering the economics, they are observed not to be optimal. The big size farm ponds need large areas to be wasted for the digging of the structures. They need huge investment for their construction and lining. Hence, proper scientific studies are needed so that its storage becomes adequate to save the crops from the adverse effects of the drought in monsoon and to assure the possibility of growing a second crop in the winter and at the same time, it is economical also. Simulation studies by daily water balance models of both the crop field and the pond help to understand the availability of water in the pond to meet the supplemental irrigation demand of the crops.

9.1 Introduction

The water harvested in the farm pond is a very valuable commodity. Every care should be taken so that not a single drop is wasted. The two major forms of losses in farm pond are (i) evaporation losses and (ii) seepage losses. Evaporative water loss (E_loss) and losses due to seepage are the two vital natural outflow components of unlined farm ponds. Studies conducted byGuerra et al. (1990) and Pal et al. (1994) indicated that the seepage loss from unlined ponds amounts to 45-67 per cent whereas the E_loss constitutes 30 per cent of the total out flow from the system. Water losses by evaporation and seepage were 5.3 and 9 mm day^-1, respectively amounting to 70% of total storage in the ponds (Syamsiah et al.1994).

Estimate of evaporation across the country indicates that it is as high as 2000 mm in the semi-arid tropics. Annual average value of the evaporation loss varies from 1400 to 1800 mm across major parts of the country: the value being highest in west Rajasthan, parts of Saurasthtra and Tamilnadu and lowest in coastal Mysore, Bihar plateau and east M.P. Reliable statistics reveal that about 70 M ha m of water evaporates from the water bodies and land surfaces out of the total annual precipitation of about 400 M ha m received by the country. The total evaporation losses from the water surfaces are about 5 M ha m from the total storage of 15 M ha m in the reservoirs including ponds, lakes spread all over the country (Belgaumi et al.,1997). In this section, the methods to estimate the losses like seepage and evaporation and various techniques to control them are discussed.

Introduction

A system is a set of inter-related, interacting and committal elements acting calm for an accepted purpose and able of reacting as an accomplished to alien stimuli. It is artless by its own achievement and it has alien boundaries based on all cogent augment backs.

Farms are systems because several activities are carefully accompanying to anniversary added by the accepted use of the Grassland labour, Grassland and capital, by accident administration and by the collective use of the farmer’s administration capacity. The assay of farms is absolutely important to the accountable of development.

Relevance of the farming systems approach: Choosing behavior for agronomical development requires the use of advice about the absolute farming situation. After-effects of farming system from a circuitous alternation of committal and committal apparatus of elements that the agronomical enterprises of the rural household. At the centermost is the agriculturalist who takes accommodation in an attack to accomplish his aspirations, goals and adapted objectives aural the banned of technologies accessible to him. Uses inputs to get outputs in acknowledgment to the abstruse elements which are the accustomed ability award in any accustomed breadth akin what the farming system can be. The human aspect provides the framework for development and appliance of an accurate farming system.

Scheduling irrigation is the process of determining when to irrigate and how much to irrigate. Selecting the appropriate time span in between two irrigation and applying the required volume of water in each irrigation, ensures saving of water, minimize energy use, higher crop yield and lower production costs. Irrigation applied earlier than due date causes loss of water through evaporation or deep percolation and later causes water stress to plants and thereby affects the growth and yield of the plants. Scheduling of irrigation may be required in two field conditions: (i) when availability of water is adequate, (ii) when availability of water is limited.

In the places where water is adequate scheduling of irrigation follows full irrigation with time sequence of minimum number of irrigation to ensure maximum yield and high water use efficiency. When water is limited its use is rationalized by using at the sensitive stages of the plants and withholding irrigation at other stages. The sensitive stages so selected that by using the available water provides possible maximum yield.

8.1 Working Capital Management – I

Working Capital Management: Working capital is a measure of firm’s efficiency and its current financial health. Managing the operational capital is called as working capital management.

Every firm has short term assets and short term liabilities, they are also known as current assets and liabilities. It is calculated by subtracting short term liabilities from short term assets. The working capital ratio determines if the firm is financially stable, and has enough short term assets to cover its short term debts.

Working capital management ensures that the company has enough monetary liquidity to meet short term debts. Structuring an effective working capital management is a great way to enhance the income. Ratio analysis and management of individual components of working capital are two primary importance of working capital management.

Ratio analysis: Process of determining and analyzing numerical relationships in accordance to financial statements like balance sheets, income statements and cash inflow statements is known as ratio analysis. The primary purpose of ratio analysis is to appraise the operating and financial performance of an economic activity and determine its efficiency, profitability, liquidity and solvency. It also helps in getting a brief idea about comparative valuation by comparing ratios of different companies in the same sector.

Inventory Management: Inventory management involves overseeing the purchase of new items and managing the existing ones. It aims to create such a purchase plan that will ensure effective delivery of materials. Two most used inventory management strategies are ‘the just-in-time method’ and ‘material required planning.’ In former one the firm plans to receive items at the time of need rather than maintaining high inventory levels, and the latter one is based sales forecasts.

Cash Management: Cash management is process of collecting, managing and utilizing the cash inflow to optimize the short term financial stability. The key component in accomplishing this task is solvency. Successful cash management is useful when any unexpected demand for cash occurs out of the blue.

Abstract

Dactylorhiza hatagirea (D.Don) Soo, a plant species native to Indian Himalayas (Badola and Aitken, 2003; Ved et al., 2003), is one of 110 orchids known for their medicinal properties (Jain 1991; Lal et al., 2004). Known earlier as Orchis latifolia auct. non Linn., D. hatagirea has traditionally been used in indigenous system of medicine in India as ‘Hatajari’ or ‘Salam Panja’. The plant has therapeutic, ornamental and ecological significance (Gupta et al., 1998; Vij et al., 1992; Kala, 2000a). Due to over extraction from nature for medicinal use, the species has become threatened and categorized as critically endangered species (Ved and Tandon, 1998; Kala, 2000b; Ved et al., 2003; Bhattarai et al., 2014). This contribution provides insight into the botanical background, distribution, medicinal importance, threat status, cultivation and commercial aspects, and strategies for its conservation and sustainable utilization.

Abstract

A very strong shallow focus submarine earthquake (of magnitude 9.0) occurred off the west coast of Sumatra Island due to the movement of Indian Plate and Burma Plate on 26th December 2004 at 06:18:53 IST. A vast area around its epicentre was rocked including Andaman and Nicobar Islands and parts of the eastern and western coasts of the Indian mainland. This earthquake had generated a global tsunami, which had also pounced on the Andaman and Nicobar Islands and the coasts of Andhra Pradesh, Tamil Nadu and Kerala and caused severe damage to the coastal population and infrastructure. Considering the devastation of this tsunamigenic earthquake, the Department of Science & Technology, Govt. of India has launched a coordinated programme for imparting S & T inputs with futuristic approach to support rehabilitation programme in the affected areas on a sustainable manner. The main objective of the programme is to generate geospatial databases on damages and risk zonation using pre and post-tsunami remote sensing (RS) data along with collateral attribute data in GIS platform. This paper speaks on the damage assessment (both natural / physical resources and human resources) caused by the earthquake and tsunami covering parts of Andaman Islands along with strategies for risk management and constraints and alternatives for micro level planning.

Keywords: Tsunamigenic earthquake, Damage Assessment, Remote Sensing and GIS, Andaman - Nicobar.

Milk production in India is a subsidiary activity of agriculture in contrast to the organized dairy sector in the western countries. Farmers and landless labour maintain one to five milch animals. As a result, small quantities of milk are produced in a scattered manner. Due to this reason, milk procurement models from western countries, such as bulk cooling and bulk transportation are not applicable under Indian conditions. Collection of small amounts of milk is scattered over long distances and, therefore, poses a formidable challenge in maintaining the quality attributes and keeping costs down.

3.1. Rural Milk Collection

A systematic approach to rural milk collection suitable for the tropical climate and techno-economic conditions prevailing in India has been developed, based on the indigenous experience gained over the past few decades. In the first phase, extensive surveys are undertaken in the milkshed areas, where the milk plant is to be established. The second phase involves ‘route planning’ taking into account, availability of quantities of milk, access to roads for plying vehicles and distance from the site of dairy plant. Then zones are identified, representing equal costs of collection and transportation. In the third phase, planning is done for locating the primary collection centres as well as chilling centres, where, milk can be cooled to 4ºC before transporting to the milk plant. Milk may be collected from individual producers either by the contractor or by forming village level cooperative societies.

Respiration is the oxidative breakdown of complex substrate molecules such as starch, sugars, and organic acids normally present in plant cells to simpler molecules such as carbon dioxide and water. Concomitant with this catabolic reaction is the production of energy and intermediate molecules that are required to sustain the myriad of metabolic reactions essential for the maintenance of cellular organization and membrane integrity of living cells. Since respiration rate is so tightly coupled to the rate of metabolism, the measurements of respiration provide an easy non-destructive means of monitoring the metabolic and physiological state of tissues, e.g., the events of senescence and ripening are often signaled by abrupt changes in respiration.

Maintaining a supply of high-energy compounds like adenosine triphosphate (ATP), nicotinamide adenine dinucleotide (NADH) and pyrophosphate (PPi) is a primary function of respiration. Nicotinamide adenine dinucleotide plays very important role in mitochondrial matrix (Moller and Ramusson, 1998). The overall process of aerobic respiration involves regeneration of ATP from adenosine diphosphate (ADP) and inorganic phosphate (P_i) with the release of carbon dioxide and water. If glucose is used diphosphatas substrate, the overall equation for respiration can be written as follows:

Fresh fruits are an important component of our diet since they provide essential nutrients like minerals and vitamins and are often attractive to the consumer because of their taste, texture, colour, aroma and flavour. Fruits of different species are botanically different, and they may be derived from various parts of the flower, including the pericarp, mesocarp and receptacle. Growth of fruit tissues is initiated shortly after fertilization and accompanied by the accumulation of food reserves donated by the parent plant. Fruit ripening corresponds to a number of physiological, structural and biochemical changes, which make the fruit attractive to the consumers. These changes include physical changes, viz. the changes in colour, texture, taste, aroma and flavour, and the metabolic changes such as changes in the level of enzymes and gene expression. The varieties of mechanism, which exist in different fruits to bring about a series of these changes to make them attractive for consumption, have been summarized in Table 9.1.

Because of the variety of ways in which these quality attributes are generated, there are significant differences existing in enzymes involved in ripening of different types of fruit. Once initiated, these physiological and biochemical modifications continue until the fruit is in peak condition for consumption. If the fruits are not harvested at appropriate stage of maturity, these changes continue and make them more susceptible to mechanical damage, infection and senescence. Since harvesting fruits at right stage of their maturity is critical, it is important to understand the biochemistry of fruit ripening process fully. This chapter will highlight the biochemical and metabolic changes involved during fruit ripening to make the fruit acceptable for potential consumers. Some of the possible genetic manipulations, which can be done to delay the onset of these ripening related changes, are given in later part of the chapter.

In India, the total losses of vegetables due to inadequate post-harvest handling, transportation and storage facilities have been estimated at least 25-40%. However, in some vegetables, the post-harvest losses may be as high as 80-100%. Being highly perishable nature of the vegetables, the losses always increase as the produce moves from harvesting to the consumer. Vegetables with a loss of as little as 5% in fresh weight show shrivelled, wilted and staled appearance, which makes the vegetable tissues tough, non-crispy and unpalatable, and eventually, lowers their saleability and consumer acceptability considerably.

Improper harvesting, handling, transportation, storage and distribution of vegetables result in significant post-harvest losses. In such situations, the reduction in post-harvest losses of perishables becomes more essential in countries like India. If these losses are minimised by handling and storing the produce carefully, the following gains can be realised:

The Jammu and Kashmir State lies in the extreme North of the Himalayas and constitutes about 67.5 per cent of the North West Himalayan region. The State is predominantly a mountainous state with all the major Himalayan ranges and trans-Himalayas adequately represented. The State of Jammu and Kashmir located in the north Western corner of India, extends between 32^o-17' and of 37^o-50' North parallels of latitude and 73^o-26' and 80^o-30' East of meridians of longitudes and 81^o East of Greenwich. The State on the basis of physiography may be divided into three main regions (i) outer Himalayas which comprise of Jammu province (ii) lesser Himalayas which comprises of Kashmir Valley and (iii) inner Himalayas which comprise of Ladakh province. Jammu, Kashmir and Ladakh regions have distinct agro climatic characteristics. Jammu region has two different climatic zones depending primarily on altitude. Lower hills & plains bear subtropical climate with hot dry summer lasting from April to July. The summer monsoon commences around first fortnight of July and fading away in early September. This is followed by dry spell from September to November. Winter is mild and temperature seldom touches freezing point. In the high reaches of Chenab valley, the climate is moist temperate, winter is severe and varied quantity of snow is received. The Kashmir valley with Pir Panjal Mountains on its South and Karakoram on its North receives precipitation in the form of snow due to western disturbances. The winter is severely cold and temperature often goes below 0°C. Summers are warm and dry and autumn is again cool and sometimes wet. Ladakh is situated in eastern mountain range of Kashmir. This is one of the highest ranges in the world. It is a cold desert receiving very little precipitation. The temperature remains below the freezing point during winter due to its high altitude.

Bihar’s economy is highly dominated by agriculture and allied sectors. Around 85 to 90 percent of the population still lives in rural areas, where agriculture along with animal husbandry, is the main source of their livelihood. In Bihar, the gross and net sown area is estimated at 8.26 and 5.64 million hectares, respectively. Nearly 60 per cent area under cultivation in the state is rainfed (Anon, 2008). The region comes under sub-humid subtropical monsoon climate. Most of the annual rainfall (almost 85 per cent) received from south-west monsoon, occurs during June to September (Sattar, 2010). There are three crop growing seasons in the state commonly known as kharif, rabi and zaid. The important kharif season crops, which are planted in May-June and harvested in September–October, are rice, maize, sesame, sorghum and bajra. Pigeon pea is an important long duration pulse crop sown during kharif season as sole crop or intercropped with maize. The important rabi crops which are sown in October–November and harvested in February–March are wheat, rabi maize, potato, chickpea, lentil, rapeseed, mustard, barley. Zaid crops, which are cultivated in short growing season extending from March to May in between rabi and kharif seasons, are also called summer crops, which include green gram, cowpea and sesame etc. Rice, wheat, maize, pulses and oilseeds are grown in all the districts. Sugarcane is also an important annual cash crop. However, the choice of crops, their varieties and crop rotation varies across different agro climatic zones. Rainfed crops during both kharif and rabi seasons in the state mostly experience moisture stress at different phases of growth and produce lesser yield. Like most parts of the country, crop production in Bihar is largely dependent on the performance of south-west monsoon.

Abstract

High precision Geodetic Global Positioning System measurements have become important for studying present-day tectonics in active orogenic belts such as the Himalayas. Geodetic Global Positioning System measurements in the Darjiling-Sikkim Himalayas (DSH) during 2000-2004 indicate that the frontal part of the Darjiling Himalaya is locked to the Indian plate and statistically negligible shortening is accumulating there at present. While this observation is in conformity with observations made in Nepal to the west of the DSH, it differs in the fact that about ~ 12 mm/yr of convergence is accommodated in the DSH and the western Bhutan Himalayas as opposed to about ~ 20 mm/yr in Nepal Himalaya. About 16 mm of convergence is accommodated in the Arunachal Himalaya, to the east of DSH, of which about 6 mm is accommodated in the Lesser Arunachal Himalaya. These observations indicate that there is a fair amount of heterogeneity in the way convergence is accommodated along the length of the Himalayan arc and the Himalayan seismic hazard estimations need to account for this. Seismicity patterns in the DSH indicate that active deformation in the area is driven by strike-slip as well as thrust tectonics. Strain accumulation in the DSH during 2000-2004 appears to be dominated by strike-slip tectonics in the region and about ~ 4-5 mm/yr of sinistral strike-slip is observed along a NNE-SSW trending near-vertical fault identified in the area (named as the Gish transverse fault).

Abstract

This paper presents a kinematic analysis for explaining the spatial and temporal variations of deformational structures in the Cuddapah Proterozoic orogenic belt, South India. This belt shows virtually undeformed, flat-lying sedimentary rocks in its western margin, whereas strongly deformed and folded rocks in the eastern boundary. The structural variations indicate increasing deformation in the east direction, implying a relative tectonic convergence from the east side. Based on the corner flow theory, we use a viscous model to determine the heterogeneous strain field in the asymmetric convergent zone, and explain varying deformations from the foreland to hinterland. According to this model, the strain field in the hinterland part varies in a pulsating manner with progressive crustal thickening, giving rise to multiple deformational structures in the course of a single continuous tectonic movement. We also studied the strain field in finite element models considering the gravity forces, and obtained similar results. The foreland vergence of deformational structures in the Cuddapah belt indicates a top-to-west horizontal shear during the overall horizontal contraction. Our numerical models show that this horizontal shear component in the foreland region is likely to be associated with a vertical shear component in the hinterland.

A bill to provide for regulating the quality of seeds for sale, import and export and to facilitate production and supply of seeds of quality and for matters connected therewith or incidental thereto. Be it enacted by Parliament in the Fifty-Fifth Year of the Republic of India as follows

Introduction

Germination is the growth of a plant contained within a seed; it results in the formation of the seedling, it is also the process of reactivation of metabolic machinery of the seed resulting in the emergence of radicle and plumule. The most common example of germination is the sprouting of a seedling from a seed of an angiosperm or gymnosperm. The seed of a vascular plant is a small package produced in a fruit after the union of male and female reproductive cells. All fully developed seeds contain an embryo and, in most plant species some store of food reserves, wrapped in a seed coat. Most seeds go through a period of dormancy, where there is no active growth; during this time the seed can be safely transported to a new location and/or survive adverse climatic conditions until circumstances are favourable for growth. Dormant seeds are ripe seeds that do not germinate because they are subject to external environmental conditions that prevent the initiation of metabolic processes and cell growth. Under proper conditions, the seed begins to germinate and the embryonic tissues resume growth, developing towards a seedling. In short, seed germination is the ability of a seed to develop in to a normal plant under favourable conditions in the soil (ISTA, 1985) or the process by which the dormant embryo wakes up and begins to grow is known as seed germination.

2.1 Introduction

Perfumery, the art of making perfumes, began in ancient Egypt but was developed and further refined by the Romans and the Arabs. The history of perfume began in antiquity. The word perfume is used today to describe scented mixtures and is derived from the Latin word, “per fumum”, meaning through smoke. Although perfume and perfumery also existed in East Asia, much of its fragrances are incense based. The world’s first recorded perfume maker Tapputi was mentioned in a Cuneiform tablet from the 2nd millennium BC in Mesopotamia. Perfume and perfumery also existed in India. The earliest distillation of Attar was mentioned in the Hindu Ayurvedic Charaka Samhita. The Bible describes a sacred perfume, consisting of liquid myrrh, fragrant cinnamon and cassia. In Islamic culture, perfume usage has been documented as far back as the 6^th century and its usage is considered a religious duty. Al-Kindi in the 9^th century wrote a book on perfumes entitled ‘Book of the Chemistry of Perfume and Distillations’ that has more than hundred recipes for fragrant oils, salves, aromatic waters and substitutes or imitations of costly drugs.

ABSTRACT

Plants play an important role in human survival and contribute to sustainable development as they are the major source of different bioactive compounds such as taxol, digoxin, reserpine and vinblastin used directly as drug and medicines for human diseases. As plants are basic need and requirement for living, they are used as herbal remedy, and known to produce lead compounds for semi synthesis of higher activity or lower toxicity. Indian Himalaya regions are repository of more than 8,000 plants species and out of which 50% are endemic and unique due to thepresence of morphological and chemical structure of peculiar characters. Most of the plant used in Indian traditional system of medicines such as Ayurveda, Unani, Siddha or Amchi described for different formulations and ethnomedicinal applications had distributional range restricted to the hills and the valleys of Himalayas. Hence, in this communication, an attempt has been made to present economic plants of Himalayan origin used as ethnomedicine, wild food plants as vegetables, herbal teas, homemade soups, wild salads, chutney, underground snacks, alcoholic drinks, nutrients as burnt powder and other human usages. Besides, this unique Himalayan plant has potential to be used as wild source for the development of new drugs and medicines which can sustain future to human survival and had the ability to produce medicine against deadly diseases. It is estimated that 80% of the world population uses traditional medicine made from herbal botanicals to cure disease and illness. It is of the record that 122 compounds obtained from ethnomedicinal plants is globally used as drugs. This indicates that tribal knowledge on plants and drug discovery cannot be separated, and newdrugsfor uniquedeadly diseases can be discovered only from ethnobotanical leads. More than 5,000 species reported from Indian Himalayas are of ethnobotanical values and they are used as medicine or wild food by different tribal communities. It can be concluded that Himalayan tribals are endowed with strong culture associated with botanicals and have age-old tradition with respect to the use of wild plants as food and medicine. Plants provide a real substitute for the primary health care systems in hills and valleys, and definitely going to serve as jewel for mankind in near future to come.

1. Introduction

India, as a party to the Convention on Biological Diversity (CBD), has obliged to document a whole range of organism diversity within her territorial boundaries, make all attempts to conserve these bio-resources and monitor the efficacy of the conservation measures adopted. With its diverse ecological conditions and unique geographical location, Indian landmass supports rich diversity of algal flora. However, this algal wealth needs to be systematically surveyed and documented from all possible habitats. Ecological patterns emerged from recent studies within India are assessed with the identification of knowledge gaps and conservation implications in algal systematics.

During last one decade, great advances have been made in the field of Algology/Phycology throughout the world. Over the years algae has attained a greater reputation and popularity because of its economic importance, particularly as food, for commercial products, water contamination, toxin production, sewage oxidation, municipal water purification in fisheries and above all for the study of fundamental scientific information. But before the algae put in to such important use, it is imperative to have a baseline data about the material in question. Without knowing the status of algal resources of any area one cannot have projections for their utilization or gain knowledge of their ecological role and functions. The taxonomy of algae is, therefore, a prerequisite for all applied fields of algae apart from academic interest. Recent global surveys have revealed that there is lack of knowledge about fresh water algal diversity of tropical countries including India.

1. Introduction

The gymnosperms constitute a distinct subdivision of spermatophytes, the seed bearing plants. The term ‘gymnosperm’ is derived from Greek words, gymnos, naked and sperma, seed, which indicates that these are naked-seeded plants, i.e., those in which the seeds are not enclosed within the fruits but are borne freely exposed on an open carpel. In contrast in the angiosperms the seeds are enclosed within a closed carpel (ovary). The first known use of the term gymnosperm was given by Theophrastus in 300 BC in his book “Enquiry into Plants” to describe “plants with unprotected seeds”. Goebel (1905) rightly described gymnosperms as “Phanerogams without ovary”. The Scottish botanist, Robert Brown in 1825 first distinguished gymnosperms from angiosperms. At one time they were considered to be single class of seed plants, called Gymnospermae, but taxonomists are now tend to recognise four distinct divisions of extant gymnospermous plants - coniferophyta (Pinophyta), Cycadophyta, Ginkgophyta and Gnetophyta. Geological history reveals that all divisions of gymnosperms have been distinct groups since their origin.

Among the gymnosperms are plants with stems that may barely project above the ground and others develop into the largest trees on the earth. The extant gymnosperms are a small group of plants comprising ca. 1026 species belonging to 83 genera and 12 families (Christenhusz et al. 2011). They are distributed throughout the world, with extensive latitudinal and longitudinal ranges. Economically, gymnosperms are of outstanding value, fulfilling the greater proportion of our timber as well as resin requirements. They are also the dominant forest makers of the world and in addition they play a leading role in the preservation of the environment (Sahni 1990). By far the largest group of living gymnosperms is the conifers (pines, cypresses and relatives), followed by cycads and Gnetales (Gnetum, Ephedra and Welwitschia).

Glycosides are compounds containing a carbohydrate and a non carbohydrate residue in the same molecule. They are the complex polysaccharides which are chemically heterogeneous collection of substances, which have in common one property that the molecules are linked together and contain at least one sugar unit. The term glycoside represents a group of compound containing glucose and one or more basic or acidic organic compound in chemical combination. When the sugar other than glucose is present, it is called glycoside. Each sugar is linked through a glycosidic bond to either a non sugar component, aglycones, (aglycone or aglucone is the nonsugar molecule in glycosides).

Abstract: Snapdragon, a decorative ornamental, is used as model plant for genetic and biochemical study. These are popular flowering potted plants, bedding plants and cut flowers around the world due to their flowering floriferousness, wide range in flower colour, size, and shape with numerous phenotypes (Tall Giant/ Grandiflora, Super Giant, Dwarf, Semi-dwarf, Miniature, etc.) series (Butterfly, Rocket Hybrid, Sweet Heart, Pixie, etc.) and cultivars available in market. Hybrid seed production transformed the crop; continued domestication by flower breeders produced a wide range of flower colours and flower patterns. The increasing knowledge of the inheritance of traits and molecular genetics techniques are valuable tools aiding modern snapdragon breeders. Snapdragons are of the few floriculture crops which have genetic evolutionary race history, precise elucidation of taxonomic relationships between taxa, genomic maps, and advanced molecular genetics. In particular elucidation of the genes involved in control of floral development and in anthocyanin biosynthesis pathway has enabled precision in the creation of new flower colours or modification of floral symmetry and expression.

Keywords: Antirrhinum, taxonomy, flower shape, structural genes, molecular biology.

1. INTRODUCTION

Exotic means anything of foreign origin and something not of native growth. Exotic vegetables are those species introduced to a country or location. Broccoli, Brussels sprout, Knol- Khol, Red Cabbage, Lettuce, Asparagus, Baby Sweet Corn, Chive, Garden beet, Kale, Swiss chard, Parsley, Parsnip, Chinese cabbage and Leek are important exotic vegetables. These generally require cool temperature.

Due to increasing foreign culture and increasing living standards, the demand of exotic vegetables is continuously increasing in cosmopolitan cities and five star hotels. These are good in taste and have high nutritive value. Most of the exotic vegetables can be used in salad and soups. These crops are very remunerative.

In urban areas only few part time grower devote time to the production of exotic vegetable. Exotic vegetable farming is profitable venture that require little capital and become source of livelihood to the farmer. The increase in their output level and profit will contributing to food security in the country. About 50% world population living in the cities. The rapid urbanization poses new challenges for food security. It is hard for most of the cities in the developing countries to provide sufficient employment for rapid increasing population. Some district of Maharashtra like Pune, Nasik & Satara now growing exotic vegetables like asparagus and broccoli. Cherry tomato, leek, lettuce, red cabbage & baby corn are also important as exotic vegetables.

In HP cultivation of Exotic Vegetable like asparagus, broccoli, lettuce, leek, chinese cabbage, snow pea, and parsley start picking up in Theog, Matyana, Saproon Valley, Sirmour, Katrain, Manali, Narkanda & Sanj Valley. These vegetables are beneficial for health as they are rich in phyto-chemicals and neutraceuticals. India is endowed with a wide range of tropical, sub-tropical and temperate agroclimatic conditions, therefore almost all kinds of vegetable crops grown around the world can be cultivated in one or the other corner. There is a lot of potential for exotic vegetables for domestic and export market. Important one are:

1. INTRODUCTION AND IMPORTANCE

Flower arrangement is a very old art. In India, the flowers have been earlier arranged in temples and during festivities. The first rules of ikebana were laid down in Japan more than a thousand years ago. Flowers have been widely used for interior decoration, but they were cut from the garden and simply massed into water-filled containers to brighten the home. The beauty of the display relied upon the blooms themselves rather than the aesthetic appeal of the design. Even at homes and venues of festivals/functions/on auspicious occasions, flowers are used in a big way in the form of garlands, wall hangings, and floor decorations. Flower arrangements grace table tops, window sills, corners, fire places, and so on to suit the occasion.

Flower arrangement may be defined as the art of organizing and grouping together plant materials (flowers, foliage, fruits, twigs etc) to achieve harmony of form, colour and texture, thereby adding cheer, life and beauty to the surroundings.

Various types of arrangements are chosen, as appropriate to the area and occasion. Medium sized ‘round’ arrangements are often provided at the guest relations executives’ desk in the lobby and on coffee tables in the lounges. In most five-star hotels, one can see huge, spectacular arrangements in the loggies. Table arrangements for conferences must be low so that guests may see over them. At informal banquets, large arrangements may be seen. At wedding banquets, wall arrangements using gerberas are very popular, now a days. On special occasions and festivals, a large amount of flowers is required for making up various types of arrangements. The extent to which flowers are used in hotel interiors depends on the degree of luxury provided, the number of special functions held.

The housekeeper is responsible for all flower arrangements and their placement. Simple arrangements such as a bud in a vase can be done. Alternatively, flower arrangements may be provided on contract, in which case the arrangements are brought in and taken away at agreed times and little or no floral work is carried out on the premises. Arrangements like running water, containers, buckets, vases, scissors and flower pots are important.

Importance

Ajwain is an important seed spice and is also useful for its medicinal values. It is a traditional potential herb for curing many ailments in human and animals. It is usually used as a digestive aid, relieves abdominal discomfort due to indigestion and antiseptic. The seeds of ajwain is bitter, pungent and contain 2-4.4% brown coloured oil known as ajwain oil. The main component of this oil is Thymol, which is used as gastrointestinal ailment, lack of appetite and bronchial problems. Thymol is also used in toothpaste and perfumery (Joshi, 2000). Seeds are also used for curing abdominal pains, abdominal tumors and piles (Krishnamoorty and Madalgeri, 1999). In southern parts of India dry ajwain seeds are powdered and soaked in milk, which is then filtered and fed to babies as it relieves colic in babies. It can be used as digestive mixture in large animals.