eChapters

1. FRUIT CROPS

1.1 Physiological Disorders

A wide variety of physiological disorders are found in apple fruit, but the susceptibility varies with variety, pre-harvest factors and post harvest conditions. Disorders can be considered in three categories:

1. Disorders that develop only on the tree: Most important is watercore in which intercellular air spaces in the core and cortical tissues become filled with liquid, Presence of watercore in fruit at harvest creates problems in certain varieties such as ‘Delicious’ because fruit with moderate or severe watercore can develop breakdown during storage.
2. Disorders that develop on the tree and during storage: Bitter pit is a disorder characterized by development of discrete pitting of the cortical flesh. Rapid cooling, CA storage and application of postharvest calcium drenches may be able to reduce its occurrence.
3. Disorders that develop during storage: Senescent breakdown disorders, chilling disorders and disorders associated with inappropriate atmospheres during storage are common disorders. The most common disorders associated with temperature and atmospheres are superficial scald, soft scald, low temperature breakdown, brown core, internal browning, low O2 injury, and high CO2 injury.

Pulses can be grouped into kharif and rabi pulses according to their temperature requirements. In India chick pea, pea, lentil and beans require relatively less temperature and are grown in rabi season, whereas others are confined to kharif season. However, kharif pulses can also be grown in pre-rabi on stored soil moisture or as irrigated crops in rabi and summer seasons.

Pulse crops have long tap root system which extracts soil moisture from deeper layers. Water uptake across the depth of rooting zone is not uniform. In general 40 per cent of the total water uptake occurs from first one fourth of the rooting zone, 30 per cent from the second, 20 per cent from the third and remaining 10 per cent from the last one-fourth region of total rooting depth (Nageshwararao and Writ, 1994). Plants often maintain higher root length densities than required in the surface layers to facilitate rapid uptake of recent rain/irrigation before it evaporates.

Pulse crops have a unique position in sustainable crop production as they provide proteinaceous food of high nutritive value and keep the soil alive and productive. India is the largest producer and consumer of pulses in the world which accounts for 32 per cent of global area and 28 per cent of world’s pulse production. But the yield levels of these pulse crops are not satisfactory as it is grown as a neglected crop. Besides, extensive damage caused by insect pests is another major constraint for low yield of pulse crops. On an average annually 2.5 to 3.0 million tonnes of pulses are lost (Rabindra et al., 2004) with a monetary value of nearly Rs.6,000 crores due to ravages of insect pest complex (Reddy, 2009 and Panda et al. 1998). About 250 insects have been recorded feeding on these pulse crops in different parts of India (Narang, 1990) of which maximum damage is caused by the pod borer complex along with some sucking pests and foliage feeders. Sap feeders viz., aphids, whitefly, leaf hopper, thrips ; defoliator viz., leaf roller, hairy caterpillars etc are major threats to the crop during vegetative stage whereas the pod borers and pod sucking bugs are of major concern during reproductive stage. About two dozen insect pests are very important and found occurring on one or the other pulse crop frequently causing variable degrees of damage. A list of the very common insect and mite pests infesting different pulse crops (Table 1) and the extent of loss caused by different insect pests to some important pulse crops documented by the IIPR, Kanpur (Table 2) are furnished below.

ABSTRACT

The Plant Growth Promoting Rhizobacteria (PGPR) is a group of rhizosphere-colonizing bacteria producing substances which increase the growth of plants and/or protect plants against pathogens. The use of PGPR has become rather common practice and is on the rise in many regions of the world. Inoculation with PGPR also aims at reducing the application of potent ially pollut ing chemical fertilisers and pesticides. Biocont rol microorganisms have unquestionable potential for managing plant diseases, insect pests and nematodes besides increasing crop productivity. Interest in biological control has recently been intensified because of imminent bans on effective pesticides, widespread development of pesticide resistance in insect pests and plant pathogens and a general need for more sustainable pest control strategies. Active and long-term colonization of the root surface of the plant and effective expression of disease-suppressive traits are generally considered prerequisites for successful suppression of horticultural crop diseases by rhizobacteria. The important mechanism of biocontrol by PGPR involve competition and production of antibiotics such as 2,4-diacetylphloroglucinol (DAPG), pyoluteorin (PLT), pyrrolnitrin, phenazine-1-carboxylic acid (PCA), 2^-hydroxy phenazines and phenazine-1-carboxamide (PCN). Siderophores, including pyochelin and pyoverdine which chelate iron and other metals also contribute to disease suppression by conferring a competitive advantage to biocontrol agents for the limited supply of essential trace minerals in natural habitats. Induced systemic resistance (ISR) is a state of increased defensive capacity developed by the plant when appropriately stimulated, through activation of latent resistance mechanisms induced by diverse agents including rhizobacteria. Microplants are first grown in vitro under aseptic conditions devoid of microorganisms. They are then transferred to a post vitrum substrate for acclimatization. By creating a beneficial rhizosphere in microplants at an early stage, the plants could be better protected against biotic and abiotic stress that occurs in the greenhouse or in the field. The beneficial rhizosphere can be created by biotization of microplants with PGPR. The search for PGPR to control postharvest decay of fruit crops has been actively pursued and promising strategies have been practiced nowadays. Biological control of postharvest diseases of perishable horticultural crops with PGPR is complex and involves a number of mechanisms to suppress the development of the disease. PGPR, being a potential candidate in disease management through multiple mode of action, it becomes highly imperative to know its different role in the management of plant pathogens.

2.0. Introduction

Before dealing with the various processes involved in the processing of fruit and vegetables or any food commodity on commercial scale, it is necessary to consider certain important factors such as investment, site, building, water supply, staff, labour etc. which are essential for the successful running of the food processing plant. Processing plant is the premises, buildings, structure and equipment used in the preparation, processing, handling, transportation and storage of any food commodity / fruits and vegetables / the processed products. The design and layout of the food processing plant is of great importance, besides other important factors. The food processing plant may be single storeyed or multi-storeyed depending upon capacity of production and viability of the plant e.g. if the production of the plant is assumed to be small and processing plant have to run only for short duration during the year then single storeyed processing plant can serve the purpose. Plant layout, product layout and process layout are the most important components for setting up of food processing industry and can determine the working efficiency of unit. Sanitary requirements in food processing plant are also important for marketing of the prepared product in national and international market. Sanitary requirement is as important in food processing plant as is the treatment of the effluent waste. For setting up of the food processing plant certain guidelines have been laid out by FPO, 1955.

Social research concentrates more on socio economic variables to find out effects of the events that take place in social system. The magnitude of variation in the variables assumes to bring variation on the effect. The variables relating to farmers of small farms are many and they are specific to farming system of the coastal ecosystem. Such variables were grouped under personal, social, economic, communication behaviour, marketing behaviour, farming behaviour and training. The sub variables under each heading were given in the following table.

6.1 Introduction

Torrefaction is a thermophilic process of biomass conversion into a solid, friable, homogenous coal-like material, which has better fuel characteristics than the original biomass. Torrefaction involves the heating of biomass material in the absence of air at 250 to 300°C temperature. Torrefaction produces high-grade hydrophobic nature solid biofuels from various streams of woody biomass or agro residues.Torrefied biomass has high energy density then the original biomass which make torrefied biomass as renewable alternate source for power generation in coal power plant. Torrefied biomass being hydrophobic in nature can be stored easily for longer duration with negligible biological degradation. At 250-300°C temperature volatilization has been taking place and around 30% mass of the biomass is reduced as compared to original untorrefied biomass with net energy loss of approximately around 10%.The end product is a predictable, homogeneous, hydrophobic, high value solid biofuel with far higher energy density and calorific value than the original biomass feedstock. During the torrefaction process a combustible gas is released, which can also utilised to provide heat to the process. The process diagram of torrefaction process is shown in Fig. 6.1.

As stated by Murashige’s definition, artificial seed (or synthetic/synseed) technology was initially restricted to species in which somatic embryogenesis was possible. Later, Bapat and co-workers (1987) proposed to broaden the technology to the encapsulation of various in vitro-derived propagules, and they used axillary buds of Morus indica as a first example of this new application. The new concept paved the way for the encapsulation of explants other than somatic embryos, and to the formulation of a new definition of artificial seeds (Aitken-Christie et al. 1995) as “artificially encapsulated somatic embryos, shoots, or other tissues which can be used for sowing under in vitro or ex vitro conditions”. In other words, the “new” artificial seed, lost the original bond of containing an embryo (zygotic or somatic), can now contain any kind of explant from tissue culture (such as axillary buds, shoot tips, nodal segments, bulblets, protocorms, callus samples, cells) which, following ‘germination’, will evolve into a plantlet or a shoot (artificial seed conversion) or will produce new cell proliferation (artificial seed regrowth).

Realization of synthetic seed technology requires manipulation of in vitro culture system for large-scale production of viable materials for preparation of synthetic seed, subsequently conversion into complete plants under in vitro as well as in vivo conditions. Somatic and gametic embryogenesis that enhanced axillary bud proliferation are the efficient techniques for rapid and large-scale multiplication of desirable plant species. Plant tissues such as somatic embryos, apical shoot tips, axillary shoot buds, embryogenic calli, and protocom-like bodies are potential micropropagules that have been considered for creating synthetic seeds. Encapsulations of somatic embryos, apical and axillary shoot buds, and regeneration of whole plants from them have been reported for a number of plant species (Redenbaug et al., 1986; Mathur et al., 1989; Ganapathi et al., 1992; Lulsdorf et al., 1993).

Plant tissue culture is mainly referred to as mass-multiplication of in vitro derived plantlets grown under controlled environment. Subsequently, the production of artificial seeds from in vitro grown plant propagules is also a method of mass-production of true-to-type plantlets. Micropropagation allows rapid and mass production of high quality, disease free and uniform planting material irrespective of the season and weather. Micro-shoots on being transferred to ex vitro conditions are exposed to abiotic (altered temperature, light intensity and humidity conditions) and biotic stress conditions i.e. soil micro-flora, so there is need for acclimatization for successful establishment and survival of plantlets (Deb and Imchen, 2010). In order to increase growth and reduce mortality in plantlets at the acclimatisation stage, research has been focused on the control of the environmental conditions (both physical and chemical) and to acclimatize the plants to compete with soil microflora (Mathur et al., 2008). In this chapter methods of acclimatization of plantlets derived from simple plant tissue culture or from synthetic seeds are discussed.

Nutritional significance of tannins in feeds and fodders

Tannins are widely distributed in many types of browse plants, tree leaves, forages and feed ingredients. The structure of tannins are not completely well defined but they are polymers of phenolic and aliphatic hydroxy compounds. Although tannins and related polyphenols are considered as protein binders and, protease and cellulolytic inhibitors, they can also exert beneficial effects on rumen fermentation. There are two forms of tannins viz., hydrolysable and condensed. Hydrolysable tannins are considered to have less deleterious effects on protein digestion since these types of tannins might get hydrolysed under acidic gastric condition and release bound proteins. Attempts have been made to utilize this to advantage in protection of proteins from rumen degradation.The condensed tannins are resistant to hydrolytic degradation. The reduction in digestibility due to condensed tannins is not clear whether it is due to specific interference with cellulases or precipitation of proteins.

Certain feed ingredients have been incorporated as a source of tannins, in the diets of ruminants to benefit ruminal fermentation and performance. Inclusion of Bengal gram husk as a source of tannins in the diet of sheep prevented potentially digestible carbohydrate in the rumen, but digested post ruminally (Sreerangaraju et al., 2000).

3.1 Chemistry of greenhouse gases (ghgs)

Greenhouse gases (GHGs) are atmospheric-gases that have capabilities to absorb and radiate-back the infrared (IR) radiation in the earth-atmosphere system (Figure 3.1). In this process the atmospheric-gases absorb and radiate- back IR radiation in lower atmosphere effectively emitting and absorbing heat energy heat energy. They maintain the heat budget of earth-atmosphere and keep our plant warm. If we typically see the chemistry of those gases, the key point is that they should have dipole moments. This is the property which makes them capable to absorb and radiate-back the range of IR radiation. In a molecule when valence-electrons are not equally shared in a bond between the two atoms, a slight positive charge is developed above one atom and a negative charge on the other atom. That charge difference of the different atoms in a molecule generates the dipole moment. For instance, in water vapour (H₂O- vapour), an unequal sharing of electrons and or separation of charge causes dipole moment. In H₂O, the centre has a positive charge at the hydrogen atoms and negative charges are located on the oxygen atom. The magnitude of dipole- charges, vibration and stretching of O-H bond generates certain frequency of the oscillating dipole moment that actually regulates the absorption capacity of IR radiation by H₂O vapour.

Genetics forms the basis of human life. All individuals have a physical and physiological self, determined by the interactions of genes and environment. Pharmacogenetics is the connotation used to study how heritability affects an individual’s response to drugs.494 The term ‘Pharmacogenomics’ represents systematic identification of all human genes, their products, interindividual variation and intraindividual variation in expression and function over time. It focuses on candidate genes and may include transcriptome and proteome information that affect drug metabolism, pharmacokinetics, and pharmacodynamics. It helps in predicting the patient’s response to a drug and to design new drugs495. Pharmacogenetics is study of single genes and the effects on drug response while pharmacogenomics is related to overall variation in genome. A gene is considered polymorphic when a mutation appears in more than 1% population, which may be present in the form of single nucleotide polymorphism (SNP), simple sequence length polymorphism (SSLP) and nucleotide addition or deletion. After the Human Genome Project, study in this field is accelerated dramatically. It was found that out of 1.4 million SNPs identified in the human genome, over 60,000 are present in the coding region496. These SNPs lead to miscoding of the various proteins that plays crucial role in the biological processes. If a point mutation is present in the gene coding region for various drug-metabolizing enzymes, drug target and drug transporters, it can lead to many non-therapeutic and unpredictable drug responses. In United States, over two million people suffer from severe adverse drug reactions per year and about 100,000 cases are life threatening497.

Introduction

Food is an important contributor to human well being and is essential for sustaining life. From this point of view food is expected to contains essential nutrients, such as carbohydrates, protein fat, vitamins and other essential minerals which support life. The food production initially started for individual sustenance which slowly developed in to a community requirement necessitating the involvement of man and machinery for various activities concerned with food. The progress from famine in many parts of the world to the level of self-sufficiency and the role of science and agriculture have been absolutely significant in many parts of the world. India is no exception and the green revolution during the post 1960s and the succeeding blue and white revolution ensured the self-sufficiency in India.

Of late food acts as a vehicle for inclusion of hazard in food meant for human consumption. According to Grunert (2005), factors responsible for the alarmingly higher rate of concern by public include significantly higher number of food scares in public domain, critical understanding of production and processing of certain food products sold in the market as well as the diversified food choices of the consumers in different parts of the world. Besides, the increased awareness of the consumers on food related health issues also have its share in the increased concern on food at large.

Presently food is considered as a commodity which crosses international border concurrent with the human movement and hence quality has become a major concern. The traditional food is getting replaced with value added products, particularly ready to cook, ready to eat, partially cooked products, etc. consequent to life style changes. In order to meet the demand of the trade, the conventional processing is getting replaced by community processing or industrial processing with increased number of players in the primary production, processing, transportation and other value chain activities prompting larger product control. In the process, consumers are exposed to a variety of products produced as business ventures in modern food production systems needing efficient quality control and quality assurance to tackle the issues of quality. The increased incidence of hazards in both raw materials and final products consequent to the absence or inappropriate production schedule calls for increased food safety concerns. Besides the shelf-life of the products, addition of chemicals during the production also add to the concern.

During the latter part of the 20^th century, rapid economic development in most countries coupled with population growth propelled the inevitable demand for more food and manufactured goods. However, requirement of more food is placing unprecedented demands on agriculture and natural resources. Humans have made agriculture the dominant environmental threat by clearing forests, cultivating marginal lands, and intensifying farming in sensitive landscapes and watersheds. Most of the land use systems in the tropics are characterized by a rapid decline in productivity and high rates of soil and environmental degradation which need to be addressed in a proper way.

Agriculture has changed radically since the end of World War II. Productivity of most crops has scaled to new levels because of the adoption of new technologies, machines, increased chemical inputs, and government policies. However, continuing agricultural production without harming the environment is a challenge, which must be tackled along with economic growth. Some of the environmental issues related to agriculture are top soil loss, groundwater contamination, air pollution, greenhouse gas emission, decline of family farms neglect of the working conditions of farm labourers, new threats to human health and safety by the spread of new pathogens, economic concentration in food and agricultural industries, and disintegration of rural communities (Brodt et al, 2011). This situation prompted world nations, political leaders, scientists and planners to pay more attention to the concept of sustainable development. As a concept, sustainability is concerned with the continuity of environmental economic, and social aspects of human society.

Introduction

The green revolution which initiated in India during 1960’s to 1980’s was an attempt to overcome the then prevailing threats of food scarcity and lack of foreign exchange. The food scarcity was a result of severe drought which engulfed the country as well as the political situation it had to face after its short period of gaining independence (Reddy, 2010). The only way out to overcome the acute food scarcity was intensive agriculture, with the use of high yielding varieties, chemical fertilisers and pesticides which heavily boosted agriculture production in India. The remarkable increase in production and productivity resulted in non-judicious use of chemical inputs to extract the maximum from the degrading soil. This marked the era of soil, water and air pollution and extreme health hazards to all life forms.

Rachel Carson’s “Silent spring” in 1962 was an insight into the path of DDT the then prevalent pesticide through its effect on the food chain as well as the environment. She was one among the scientists to raise her voice against the indiscriminate use of pesticides. The evident impacts raised concerns over the continued use of chemical inputs (Lairon, 2010). The situation warranted the reduced or limited use of chemicals in agriculture which resulted in an “organic movement”. This caused a slow, but evident shift in the interest of growers and consumers towards organic agriculture for health security, food safety, quality and better returns (Niggli et al., 2007).

This review is an attempt to analyse the various factors affecting the safety and quality of organic food products in comparison with conventional food. Drawing a proper conclusion was a difficult task due to the limited availability of scientific papers published in this aspect, indication of only trends rather than solid proofs and non-revelation of non-significant data regarding related experiments. However, this review could evaluate the positive and negative aspects of organic cultivation and food production from the available data, so as to suggest measures for improving the quality and safety of organic food products.

Number of individuals in a population increase under favourable environmental conditions. Sudden or violent changes in the environment or in the biological characteristics of the individual could lead to decline. Fluctuation in the population is usually because of the effect of a combination of several factors responsible for their survival, growth and reproduction. It is necessary to understand the cause of such fluctuations for better scientific management of the population as well as the habitat (Acharya, 2000). In most of the studies, community has largely been expressed in terms of species richness, abundance, density and diversity. All these have been used as indicators of habitat quality, because an increase in the value of the component is generally thought to reflect larger amounts of the necessary resources to sustain larger population within a given area. Moreover, it is believed that if the factors determining the distribution of the animals are known, predictions can be made concerning the responses of animals to specific perturbations and hence, such animals can be used to monitor environment quality (Gokula, 1998).

Introduction

Rice is the staple food for over half the world’s population. China and India alone account for ~50% of the rice grown and consumed. Rice provides up to 50% of the dietary caloric supply for millions living in poverty in Asia and is, therefore, critical for food security. Globally, share of Asia continent in rice production is more than 90% followed by America (5.2%), Africa (3.4%) and Europe (0.6%). It is becoming an important food staple in both Latin America and Africa. Record increases in rice production have been observed since the start of the ‘Green Revolution’. However, rice remains one of the most protected food commodities in world trade. Rice is a poor source of vitamins and minerals, and losses occur during the milling process. Populations that subsist on rice are at high risk of vitamin and mineral deficiency.

The Indian population of 1.32 billion is projected to reach 1.53 billion by 2030 A.D. Goyal and Singh (2002) estimated a demand of 146 million tonnes of rice (taken as 50% of total cereals) by the year 2030. On the other end of the scale, 3^rd projection puts rice demand to be 156 million tonnes by 2030 (ICAR, 2010). To meet this, it is immensely necessary to increase the productivity levels without adversely affecting the natural resource base. Achievement of the targeted production would be an uphill task in the coming decades with the shrinking natural resource base, deteriorating soil health and soil productivity, declining input use efficiency, plateauing of yields in irrigated ecologies and lack of a major yield breakthrough in rainfed ecologies. Further, slowdown in the growth rate of cereal production and growing population pressure have emerged as formidable challenges for the future food and nutritional security in India. These challenges will be more extreme under emerging situations of natural resource degradation, high energy demands, volatile markets and risks associated with global climate change (Jat et al., 2016; Lal, 2016). Since, rice is the staple food for our country’s food security primarily depends on this wonderful crop. Globally rice is cultivated now in 167 million ha with annual production of around 769 million tonnes (499.3 million tonnes, milled rice) of rough rice and average productivity of 4.6 tonnes/ha (3.62 t/ha, milled rice) of rough rice (FAO STAT, 2017). In Asian countries, >90% of the rice is produced and consumed. The other continents in which rice is grown are Africa (7.78% of the global area), South America (6.4%) and North America (1.4%).

Introduction

It is already established that mathematical modeling aims to describe the different aspects of the real world, their interaction, and their dynamics through mathematics. It constitutes the third pillar of science and engineering, achieving the fulfillment of the two more traditional disciplines, which are theoretical analysis and experimentation. Nowadays, mathematical modeling has a key role also in aquaculture. The problem is the complex modeling other than counting. Modeling and reasoning with data of different kinds can get extremely complex. Data streams are common source of Big Data. Now the task is to collect, prepare, represent, model, reason, visualize and additional issues like usage, quality, context, streaming, scalability. A few publications are available on modeling of fisheries and aquaculture in Indian context with live examples of modeling (Roy, et al. 1998, 2002, Roy et al., 2002, Ghosh et al., 2017, Roy, et al., 2006, Roy et al., 2008, 2012). A book on exclusively with various types of model applicable in fisheries and aquaculture has been published (Roy et al., 2009). In all these earlier publications conventional statistical and econometrics techniques are applied. But today there is sea change in this field with the advancement of technologies like artificial intelligence, machine learning, and big data analytics. There are attempts to apply these cutting edge technologies aiming sustainable productivity through efficient management of resources. In the following sections an attempt has been made to present an overview of the advances in analytics along with a briefing on what was developed in the past, and what is available today. Before proceeding to the analytics, I am presenting the scenario of basic characteristics of data along with different types of data generated today with automation of aquaculture industry.

Introduction

Arid Horticulture denotes cultivation of fruits and vegetables under dry and arid regions. Arid region in India is stretched over 39.54 million ha (31.71 million ha is under hot arid region and 7.38 million ha under cold arid region) comprising about 12.02% of the total area of the country. Most of the precipitation in north-western arid region takes place from July to September. Occasional frost has also been a grave issue for horticultural crops, especially, aonla and moringa (Dhandar and Saroj, 2004). The region is exemplified by low and erratic rainfall with extremes of temperature (1–48°C), high wind velocity and sandy soils (Bhandari et al. 2014). Growing of annual crops restricted only a particular season of the year is the merely source of livelihood for the inhabitant of these region. These crops often encounter abiotic stresses like drought, hot and desiccating winds during their growth period leading to poor productivity. These regions have tremendous potential for cultivation of perennial fruit trees.

Crop nutrition / plant nutrition refers to the inter relationships of mineral elements in the soil and their role in plant growth and development. This inter relationship involves a complex balance of mineral elements essential and beneficial for optimum plant growth.

Plants require certain element for their growth and development. There are about 60 chemical elements present in the plant and it doesn’t mean that all are essential for normal growth and development.

Arnon and Stout (1939) proposed criterion of essentiality. Which were refined by Arnon (1954) and are popularly known as Arnon’s criteria of essentiality. They are:

1. INTRODUCTION

Agriculture plays a crucial role in addressing the needs of a growing global population, and is inextricably linked to poverty eradication, especially in developing countries. Sustainable agriculture and rural development are essential to the implementation of an integrated approach to increasing food production and enhancing food security and food safety in an environmentally sustainable way. Attaining food security has been our major concern since independence. Appropriate policy measures in agriculture made it possible to achieve food security as well as required national confidence to meet the growing food demands, despite a growing population. The increased agricultural production has been achieved largely through an increase in the yield of grain per hectare, rather than from an increased cultivated area. The increase in production has been the result of widespread cultivation of new high-yielding varieties coupled with a package of agricultural inputs that permit the genetic expression of their high yield potential. India is now even in a position to export agricultural commodities, fish products, milk products and earns a lot of foreign exchange. The present share of the agricultural sector in total exports is 15 to 17 percent. However, the export of many agricultural commodities show a high degree of fluctuations, caused by time lags between production decisions and delivery to the market. For the Government, unforeseen variations in export can complicate budgetary planning and increase risks for attainment of debt targets. For exporters, price volatility increases cash flow variability and reduces collateral value in the market. There is a need for an aggressive export growth-oriented policy to raise the share of agricultural sector in total exports to 25%. This should come through diversification of agriculture. In our country, the exports have been allowed only after domestic requirements are met, which is the major cause of fluctuations in exports from year to year. Modelling and forecasting such fluctuating data of commodities is crucial for the sake of Government as well as for the exporters.

ABSTRACT

Intellectual property rights (IPR) have, in recent years, emerged as perhaps the most important aspect of legal system as far as protection of inventions is concerned. Intellectual property rights have been created to ensure protection against unfair trade practices. The protection of intellectual property rights (IPR) could be a means to acknowledge a creator for something new or it could be means to recover the financial investments of a financer. IPR ensures that the knowledge, innovation and capital involved in the development of a product/ technology are compensated with highest rewards, insufficient protection of IP will lead to fewer rewards and even some of the inventions will be driven to extinction. As a result the innovators may conveniently relocate to regions where they can protect the IP they develop, the latter will result in intellectual loss to a particular country. Knowledge management on the other hand, emphasizes the challenge behind effective management of innovation systems by providing protection to databases, learning tools and sharing process that innovators have developed over a period of time. Effective Knowledge management provides platform for sharing of technologies through licensing and cross-licensing agreements between different countries. The chapter deals with the fundamentals of intellectual property, its types, the applications of different categories of intellectual property in the area of science and technology including biotechnology, literature and arts, and the commercial value of intellectual property assets. Moreover, protecting traditional knowledge through the intellectual property rights and identification, documentation transmission revitalization and promotion of cultural heritage by traditional knowledge has been discussed.

Abstract

The Himalaya is one of the youngest and the richest mountain ecosystems encompassed with a variety of species of both flora and fauna. Varying in climatic conditions coupled with altitudinal gradients and unique topography leads to the formation of different types of forests, which varies from tropical to the temperate and alpine to no timber line zone and snow-clad meadows. The present study aimed to investigate the potential of medicinal plants growing in valleys and mountains of district Doda to cure various ailments of the local inhabitants including animal health care. A total of 113 species belonging to 104 genera and 55 families of angiosperms, gymnosperms and cryptogams (lycophytes and ferns) were recorded and reviewed from published documents used for treatment of different diseases in the regions. Out of the total 113 species, 17 species were of trees, 14 species were shrubs, 78 types of herbaceous plants and 4 species of climbers. Asteraceae, Lamiaceae, Rosaceae, Ranunculaceae, Polygonaceae, Solanaceae, Apiaceae, Pinaceae, Fabaceae and Berberidaceae were recorded as the dominant families of the study area. The data were collected while interacting with local people as they possess rich traditional knowledge regarding the use of different herbal plants and medicine.

Abstract

Medicinal plants growing around us are the biggest gift to mankind from the nature. They grow abundantly and over centuries, humans have learned how to utilise plants for the treatment of illness. The great Himalayan belt is home to many endemic medicinal plant species. These plants are the rich source of traditional medicines and form a basis for livelihood of rural and indigenous populations. The present study is aimed to investigate the medicinal wealth of Bani valley that lies in Kathua district, (J&K) which is a part of Western Himalaya. Due to varying climatic conditions, terrains and forest types, the valley is home to various endangered and endemic medicinal plant species. A total 231 plant species belonging to 69 families ranging from angiosperms, gymnosperms and cryptogams (lycophytes and ferns) were documented by frequent field surveys and reviewed by published literatures and floras. Out of 231 plant species, herb species were 142, shrub species were 43 and tree species were 46. Asteraceae was recorded as dominant family followed by Fabaceae, Lamiaceae, Rosaceae, Polygonaceae, Ranunculaceae, Poaceae, Solanaceae, Acanthaceae and Urticaceae. Ethnobotanical data used for various ailments and diseases were obtained from local tribes.

Abstract

Climate change is well acknowledged fact globally and in India has been witnessed with more frequent cloud bursts, highly variable frequency and distribution of rainfall, high seasonal thermal variations, receding glaciers and unstable agricultural production. Likely impact of climate change is expected to reduce agricultural productivity, production stability and incomes in some areas that already have high levels of food insecurity. However, Agriculture has the potential to retard the pace of climate change by capturing a significant part of the excess atmospheric carbon in the soil and plants in the form of organic matter and also competent to reduce emissions of nitrous oxide and methane if practiced in smart ways so developing climate-smart agriculture is thus crucial in achieving future food security and climate change goals. Transformations are needed in both commercial and subsistence agricultural systems, but with significant differences in priorities and capacity. Several climate smart agriculture practices such as cropping system improvement (e. g. crop rotation, diversification, improved varieties and integration of legumes), integrated nutrient management (e.g. green manure, compost and site specific nutrient management), resource conservation (e.g. minimum/zero tillage, keeping the land consistently covered with crop residues), precision water management (e.g. planting crops in bed, laser land leveling, mulching with crop residues) and agro-forestry have been proposed for adaptation to climate change and variability. However, their adoption decisions by the farmers are largely dependent on economic benefits associated with the interventions. It should be clearly understood that climate smart agriculture does not make use of different practices but certainly it uses them differently.

ABSTRACT

Losses and benefits in agricultural production are associated with various weather parameters. So prediction of weather systems in different spatial and temporal scale over the Indian region therefore assumes considerable socio-economic importance. Meteorological information also plays an important role in the following operations in agriculture. The meteorological services can help the farmers & the planners exploit the potential of good weather and minimize the impact of bad weather as there exist tremendous opportunities for applications of meteorology in both day to day and long term planning in agriculture and such applications could contribute substantially to promote sustainable agriculture and poverty alleviation and the management of agrometeorological data is the key to these applications. Therefore, the area and input intensive agriculture is leading us into an era of unsustainable agricultural growth as the crucial components of sustainable agricultural production and distribution system such as integration of natural biological cycles and controls; protection and renewal of soil fertility and the natural resource base; optimization of the use of nonrenewable resources and of on-farm & off- farm inputs; ensuring dependable farm income. Hence, the meteorological information may help the farmer make the most efficient use of natural resources, with the aim of improving agricultural production both in quantity and quality. It becomes more and more important to supply meteorological information blended with weather sensitive management operations before the start of cropping season in order to adapt the agricultural system to increased weather variability. Subsequent to this, weather forecast based Agro-meteorological advisories become vital to stabilize their yields through management of agro-climatic resources as well as other inputs such as irrigation, fertilizer and pesticides. The main emphasis of the existing AAS system is to collect and organize climate/weather, soil and crop information, and to amalgamate them with weather forecast to assist farmers in taking management decisions. This has helped to develop and apply operational tools to manage weather related uncertainties through agro-meteorological applications for efficient agriculture in rapidly changing environments. Hence, weather information and advisories have assumed greater significance under the increased variability in the changing climate. Thus, Weather forecasting and advisory has become an indispensable aid for sustainable agro-transformation

11.1 INTRODUCTION

Plant growth regulators have remained an important component in horticulture from time immemorial because they were effective means of quantitative as well as qualitative improvement in growth and development of crops. Plant Growth Regulators (PGR) are diverse group of organic compounds other than nutrients, produced artificially or by plants which in low concentrations promote, inhibit or modify the physiological process in plant. The term includes both naturally occurring phytohormones as well as synthetic compounds. These are produced naturally in higher plants, controlling growth or other physiological functions at a site remote from its place of production and active in minute amounts. Plant Growth Regulators are used in different forms like liquid, powder, paste etc. “Hormone” is Greek word derived from “hormao”, which means to stimulate. Thimone (1948) suggested the use of term ‘phytohormones’ as the organic substance, which are produced naturally in plants, synthesised in one Part And usually translocated to other part wherein every small quantity affects the growth and other physiological function of the plants. To distinguish them from the animal hormones they are termed as phytohormones. Auxin was the first hormone to be discovered in plants and at one time considered to be only naturally occurring plant growth hormone. The role of plant growth regulators in various physiological processes such as seed germination, f lowering, fruiting, seed development, fruit ripening and yield etc. in different crop plants is well established (Kiran et al., 2011). There are five classical phytohormones: auxins, gibberellins, cytokinins, ethylene and abscisic acid. Besides classical phytohormones a variety of other compounds that play roles in plant growth and development have also been identified, including jasmonic acid, salicylic acid, brassinosteroids and polyamines (Basra, 2000). The application of plant growth regulators in agriculture has started in 1930 in the United States. Ethylene, a naturally occurring substance, is one of the first plant growth regulators being discovered and used successfully for enhancing f lower production in pineapple (Fishel, 2006). Its toxic effects to human beings are low.

Maize (Zea mays L.) is one of the most versatile crops having the highest genetic yield potential among cereals and wider adaptability under varied agro-climatic conditions rightly earning it the name of ‘the queen of cereals’. Maize is cultivated in all agricultural areas around the world and is an economically significant crop for all human population. It is grown from 58⁰ L north to 40⁰ L south and extends from the sea level up to an altitude of above 3,800 m; covering regions with rainfall varying from 250 to 10,000 mm (Hallauer and Miranda, 1988). Globally, maize occupies an area of about 184.0 million ha with production of 1065 million tons and productivity of 55.2 q/ha (FAOSTAT, 2014). It is the third most important cereal crop and a major source of energy, protein and other nutrients for human and livestock in the world (Jompuk et al., 2011). India is the second most important maize growing country in Asia, and now ranks as the world’s fifth largest consumer of maize. It is an important cereal crop in India covering an area of 9.42 million ha with a production of 24.35 million tonnes and productivity 25.83 q/ha (Anonymous, 2015). Maize is cultivated in the country throughout the year mostly during rainy or Kharif season (June to September, 80%) followed by winter or Rabi (November to April,18%) and spring (February to May, 2%) for various purposes including grain, fodder, green cobs, sweet corn, baby corn and popcorn.

Maize is one of the most important cereal crops of the world. Being a C₄ plant, it is physiologically more efficient than rice, wheat and other important cereal crops which belong to C₃ category. In Punjab, traditionally, maize is grown during Kharif season but from last few years the area under spring maize is increasing because its cultivation is highly profitable and commercially viable after harvesting of potato crop. No doubt, Punjab has been the leading state in contributing to the national food security but simultaneously paddy-wheat rotation resulted in depletion of underground water, deterioration in soil health and environmental pollution. These problems need to be addressed for the sustainability of these natural resources and at the same time meeting the food grain production for the ever-increasing human population. Under such circumstances, maize crop is a viable alternative to replace some area occupied by rice and can help in breaking rice–wheat dominant cropping pattern in the state. Promising maize hybrids possessing high grain yield potential and offering comparable economic returns to the farmers are available with Punjab Agricultural University as well as with the private sector.

In Punjab, maize is commonly used in the form of chapatis, boiled or roasted green cob, breakfast food like cornflakes, popped grains etc. Maize chapatis are used as a delicacy with saag. The high carotene content of yellow grained maize is considered very useful in imparting yellow colour to egg yolk. Therefore, a substantial quantity of maize grain is utilized as an important ingredient of animal/ poultry feed industry. The use of maize grains for such purposes is going to increase as poultry and dairy industries are expanding. Maize plant is extensively used as green as well as dry fodder. The digestibility of maize fodder is better than sorghum, bajra and other non- legume forage crops. Maize plant does not have any anti quality factor hence can be fed to cattle at any stage. Maize can be utilized as an industrial raw material for number of industries viz., starch, ethanol, rubber, paper, cosmetics and pharmaceuticals etc. Quality Protein Maize (QPM) can be promoted for nutritional security of poor masses whereas pop corn, baby corn and sweet corn can help in increasing the farm income due to high market value. In Punjab, major industries which are utilizing maize are The Sukhjit Starch & Chemical Limited, Kapurthala, and M/s Field Fresh Food Pvt. Ltd, Ladhowal, Ludhiana.

Maize production in India has been dominated by erstwhile Andhra Pradesh and Karnataka which together contribute around 38 per cent of the total maize production of the country. Erstwhile Andhra Pradesh has achieved the highest mean yield of 4441 kg/ha in the country during the last decade (2001-02 to 2010-11) by surpassing Karnataka which had the highest productivity in the country, earlier. The main reason for achieving the highest productivity in the country was due to adoption of improved production technology along with 100% area grown under hybrids. In Telangana, maize is the third most important crop after rice and cotton. It is cultivated in 5.74 lakh hectares, predominantly in Kharif season (4.54 lakh ha), with a productivity of 3.69 t/ha (2015-16).

Trends in maize area, production and productivity in the state (1950 to 2016)

The erstwhile Andhra Pradesh (including Telangana) is the non-traditional maize growing state. But, the climate of the state is very favorable for the crop and hence maize can be grown in any season in the state. However, it is mainly grown as a rainfed crop during monsoon season, concentrated in Telangana. The trends in area, production and productivity of maize in erstwhile Andhra Pradesh have shown a remarkable increase during the past six decades. During 1955-56, the maize acreage in the state was very less (1.89 lakh ha), which has been up by 5.3 times to the present (2014-15) level of 9.95 lakh hectares. The production has also increased dramatically from merely 1.14 lakh tonnes during 1955-56 to 42.36 lakh tones during 2014-15, which is nearly 37 times higher. Similarly, the productivity of maize in the state was merely 601 kg/ha during 1955-56, which has been increased to 4257 kg/ha during 2014-15 (Fig. 1).

Improved Varieties of Leafy Vegetables

A. AMARANTHUS

Introduction

Organic farming per se is not a new concept rather is an age old practice of cultivation crops without synthetics. However, in modern usage it is a type of farming without synthetics but at the same time taking advantage of all the modern agriculture technologies like soil testing, nutrient management, ecofriendly pest management, etc. developing and developed world have different incentives for taking up organic farming. Growing health consciousness among the people of developed world is the prime motive behind interest in organic farming. However, conversion of “by default” organic agriculture into “certified organic” is perspective in the developing world so that farmers get price premium. Whatever the case may be, the area under organic farming as well as demand for organic food/product is increasing both in developing as well as in the developed world.

Organic production is a systems approach. Although many aspects of vegetable production remain the same in both “organic” and “non-organic” or “conventional” systems, there are differences. The major components of production which differ between these two systems include transplant production, soil fertility management, and insect, disease, and weed management. “Organic” usually refers to a crop management system that promotes biodiversity, biological cycles, and soil biological activity. Organic production concentrates on natural processes and how to manage them. Other materials and products are additions to, not replacements for, management. An organic system takes time to develop. It may be achieved in stages, for example by starting with organic soil amendments and other soil improving procedures. Then, try biological control of pests, some companion plants, etc. Eventually, the entire system will be changed. It will take years to convert to a healthy organic system.

Due to increase in population, rapid urbanization, industrialization and shrinking land holdings, there is tremendous pressure on availability of land resources for agriculture, which results in decreased arable land area year after year. The huge gap between present production and future requirements necessitates intensive vegetable production and availability at affordable prices. Vegetable production can be enhanced either by increasing productivity, use of improved cultivars and ago-techniques, bringing additional land under vegetable crops or by promotion of protected cultivation. By adopting protected cultivation, year round availability of quality produces both for domestic use and export can be assured.

Several biotic and abiotic stresses are the major factors responsible for low productivity and poor quality in large number of vegetable crops under open field cultivation more specifically during rainy and post rainy season. The increasing demand of off-season and high quality vegetables in various markets of the big cities had call the attention of the vegetable growers for diversification from traditional ways of vegetable cultivation to modern methods of vegetables cultivation in an agri-business entrepreneurial models. Under the new era of FDI (Foreign Direct Investment) in retail these kinds of models are having high potential for betterment of the farmers opting for quality and offseason vegetable cultivation through protected cultivation. Protected cultivation structures are useful for combating both biotic and abiotic stresses that limits the productivity and quality of vegetable crops. This requires careful planning, attention and details about timing of production and moreover, harvest time to coincide with high market prices, choice of varieties adopted to the off season environments, and able to produce economical yields of high quality produce etc.

The immediate and long-term objective of modern plant breeding in all countries irrespective of the state of their advancement is increasing the availability of food to meet the calorie-protein requirement of their people. In the past, breeders have concentrated their efforts on increasing the yield of the important crop species. Better adaptation to local environmental conditions, high production and better resistance to the major pests and diseases have been among the priority goals of genetic plant improvement. Yielding ability and stability undoubtedly deserve high priority but enough attention also needs to be paid to improving nutritional characteristics of the plant produce for their maximum utilisation. Awareness of nutritional requirements and the optimal characteristics of crop products to be utilised as food and feed, therefore, becomes an important parameter of breeding effort.

The main source of food in the developing world is cereals which provides 45 to 85 per cent of the total calories and 50 to 80 per cent of the total protein requirements. The consumption of animal proteins, which are nutritionally well balanced, is low and costly and beyond the reach of the low income groups. On the other hand, plant proteins are cheaper to produce and easier to store and transport. All these factors go in favour of increasing the quantity and quality of cereal proteins in order to improve the dietary and nutritional status of the masses in the developing world.

Proteins are made up of about twenty different amino acids. For man, eight of these amino acids, valine, methionine, leucine, isoleucine, threonine, phenylalanine, lysine and tryptophan, are essential (EAA) for constituting a well balanced diet. In impioving the grain quality of cereals consideration should, therefore, be given apart from the content of carbohydrates, fats, minerals and vitamins in the grains, to improving the protein content as also the amino acid composition of the protein.

Remote sensing images have an important characteristic known as spatial frequency. Spatial frequency is defined as the number of changes in pixel value per unit distance. Few changes in pixel or brightness value over an area in an image are known as low spatial frequency area like agricultural fields, forests, water bodies, etc. If the changes are large, then it is known as high frequency area like roads, built up areas, etc. Spatial filtering is an approach for extracting quantitative spatial information by taking into account the neighbouring pixel values along with the independent pixel value. Therefore, filtering is a technique for modifying or enhancing an image. Filtering is done to improve the interpretability of raster image or to extract certain information from them. It is a neighbourhood operation because the value of any pixel in the output image is determined by applying certain algorithm on the neighbourhood pixels of the corresponding input pixel. The nature of algorithm to be applied depends upon the information which user wants to derive from the raster image. Filtering operations are mainly done for smoothening, sharpening, noise removal and edge enhancement. A filter is a kernel of small array which is applied to input pixel and its neighbouring pixels in the raster. There are many types of filters which can be applied to a raster image in R. These types with their respective R – code examples are explained further.

Elevation or height data of land surface above a defined vertical datum is stored in the form of raster grids which is known as Digital Elevation Model (DEM). The DEM data can be processed to derive many useful parameters like slope, aspect, curvature, roughness, etc. This process of quantitatively describing terrain obtained from DEM data through computation of many variables is known as Digital Terrain Analysis. Digital terrain analysis has applications in the various fields like hydrology, ecology, geomorphology, etc. DEM data for digital terrain analysis are available from the satellites like ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer), Cartosat, ALOS (Advanced Land Observation Satellite), and SRTM (Shuttle Radar Topography Mission).

In this exercise, we are going to discuss the derivation of some primary and secondary terrain attributes from DEM data in R software. For performing digital terrain analysis in R, following packages are required.

Climate and Ornamental Crops

There are many factors which affect the production of the ornamental crops. It may be internal or external factors. Climate and soils are the chief natural factors on which the success or failure of ornamental crops production is dependent. A knowledge of the effect of various soil and climatic conditions on ornamental crops production is very essential for every prospective to grower, climate includes several factors like temperature, relative humidity, rainfall, wind, hail, light whereas, soil covers such factors as moisture supply texture, pH etc.

Temperature: The rate of development of a plant (the leaf unfolding rate) is a function of temperature. As temperatures increase, the leaf unfolding rate increases. If the temperature exceeds the maximum temperature, plants experience stress and leaf unfolding rate declines. Given the high costs of fuel, many growers are tempted to reduce the greenhouse temperature to save money on fuel. Because the rate of crop development is dependent on temperature, reducing temperatures increases production time of all crops. However, some crops will be more severely delayed than others. Reducing temperatures from 20°C to 16°C increased time to flower of Salvia farinacea by 13 days. This same temperature drop only increased days to flower of pansy by four days. For crops that are severely delayed by lower temperatures, reducing the growing temperature may actually increase total fuel costs for producing that crop. Every plant has fairly well defined range of temperature to which it is tolerant and below which the plants of that variety are liable to be injured to a more or less extent.

The process of replacing the existing mature forest with a new generation of the forest trees is called forest regeneration. It can also be defined as process by which new tree seedlings become established after forest trees have been harvested or have died from fire, insects, or diseases. Forest regeneration is one of the basic tasks of foresters. Regeneration plays such a prominent role in silviculture that most silvicultural systems are named for their method of regeneration.

Nematode Control

Plant parasitic nematodes can be controlled by several methods. The nematode control aims to improve growth, quality and yield by keeping the nematode population below the economical threshold level. The control measures to be adopted should be profitable and cost effective. It is essential to calculate the cost benefit ratio before adopting control measures.

The nematode control methods are

1. Regulatory (Legal) control
2. Physical control
3. Cultural control
4. Biological control
5. Chemical control

There is need to find better ways and solutions to mitigate future agricultural challenges toward increasing productivity across the crops and equip them with the desirable genes for resistance to biotic and abiotic stresses and to mitigate the impact of climate change and also to make them nutritionally superior. Here comes “Plant Genomics”—a newly evolved discipline of plant sciences—targeting to decode, characterize, and study the genetic composition, structures, organizations, functions, and interactions/networks of all plant genes in a genome-wide scale. Being evolved from plant molecular genetics, biology, and biotechnology, plant genomics represents the key sub- divisions of structural, functional, comparative, evolutionary, physiological, and genetical genomics. Its development and advances, however, are tightly interconnected with plant science sub-disciplines, such as proteomics, metabolomics, epigenomics, phenomics, metagenomics, transgenomics, breeding-assisted genomics, bioinformatics and system biology as well as modern instrumentation and robotics sciences.

Plant genomics is a recent convergence of many sciences. Simply stated “Genomics” is the new science that deals with the discovery and noting of all the sequences in the entire genome of a particular organism. The genome can be defined as the complete set of genes inside a cell. Genomics, is, therefore, the study of the genetic make-up of organisms. Determining the genomic sequence, however, is only the beginning of genomics. Once this is done, the genomic sequence is used to study the function of the numerous genes (functional genomics), to compare the genes in one organism with those of another (comparative genomics), or to generate the 3-D structure of one or more proteins from each protein family, thus offering clues to their function (structural genomics). In crop agriculture, the main purpose of the application of genomics is to gain a better understanding of the whole genome of plants. Agronomically important genes may be identified and targeted to produce more nutritious and safe food while at the same time preserving the environment. Genomics is an entry point for looking at the other ‘omics’ sciences. The information in the genes of an organism, its genotype, is largely responsible for the final physical makeup of the organism, referred to as the “phenotype”. However, the environment also has some influence on the phenotype. DNA in the genome is only one aspect of the complex mechanism that keeps an organism running – so decoding the DNA is one step towards understanding the process. However, by itself, it does not specify everything that happens within the organism. The basic flow of genetic information in a cell is as follows. The DNA is transcribed or copied into a form known as “RNA”. The complete set of RNA (also known as its transcriptome) is subject to some editing (cutting and pasting) to become messenger-RNA, which carries information to the ribosome, the protein factory of the cell, which then translates the message into protein.

Abstract

Mungbean [Vigna radiata (L.) Wilczek] is an important pulse crop grown in India. It is a short duration annual with yellow flowers and fuzzy brown pods. Majority of the mungbean grown in India is under rainfed conditions and the productivity of mungbean is not upto the mark to meet the daily dietary requirement of a populous country like India. The biotic and abiotic stresses in mungbean, majorly MYMV, powdery mildew, drought, salinity, water logging etc leaves a severe yield loss in mungbean crop. Among them, MYMV and powdery mildew diseases show yield losses accounting upto 85% and 40%, respectively in severe conditions. The present review paper is based on the study of both biotic and abiotic stresses and the recent advances in breeding for resistance to stresses. A detail explanation of major diseases and insect pests affecting mungbean are discussed along with the information of genomic resources and research done in mungbean in recent years. Recently SSR’s have been using widely for all molecular level research work like genetic diversity, constructing linkage maps for identifying QTL’s, marker assisted breeding etc. in mungbean. The resistant varieties developed against these biotic and abiotic stresses are listed which are very important for attaining a prominent yield in mungbean.

Introduction

Cooking accounts for a major share of energy consumption in developing countries. Fifty per cent of the total energy consumed in India is for cooking (Fritz 1981). Most of the cooking energy requirement is met by non-commercial fuels such as firewood (75%), agricultural waste and cow dung cake (25%) in rural areas. The fuel wood requirement is 0.4 tons per person per year in India. In rural areas firewood crisis is far graver than that caused by a rise in oil prices. Marginal villagers have to forage 8 to 10 hours a day in search of firewood as compared to 1 to 2 hours ten years ago. One third of India’s fertilizer consumption can be met if cow dung is not burnt for cooking and instead is used as manure. The cutting of firewood causes deforestation that leads to desertification. Fortunately, India is blessed with abundant solar radiation (IMD, 1985). The arid parts of India receive maximum radiation i.e. 7600-8000 MJ m^-2 per annum, followed by semi-arid parts, 7200-7600 MJm^-2, per annum and least on hilly areas where solar radiation is still appreciable i.e. 6000 MJm^-2 per annum. Therefore, solar cookers seem to be a good substitute for cooking with firewood.

Principle of cooking

The different methods of cooking of food are boiling, frying, roasting, and baking. For boiling of rice, lentils etc. the temperature of food being cooked is about 100° C while for other methods, high temperatures are required. Heat is supplied at the bottom of the vessel for frying and boiling purposes in conventional cooking. Roasting and baking is generally performed on open fire or in ovens, wherein food is surrounded by hot surfaces and heat is transferred to the food by radiation and convection.

Pants that tend to climb vertically on to supports are called climbers. reepers are plants that tend to creep or ramble over the ground or other surfaces spreading horizontally. These have showy flowers or decorative foliage. Climbers are conventionally used in gardens to cover fences, bare walls and tree trunks. They are used to provide ornamentation in a vertical aspect. Creepers on the other hand are used as ground covers and function as decorative elements in a horizontal aspect.

CLASSIFICATION OF CLIMBERS AND CREEPERS

Depending upon their habit, vigour, duration, nature of flowering, adaptations for climbing and shade tolerance, they can be classified as follows:

These are a broad group of plants that have evolved in situations characterized by very high day temperatures and low night temperatures with very low available moisture in the growing medium. Their plant body is modified to conserve moisture with physiological adaptations that help to reduce moisture loss considerably and to survive in hot desert situations or drought conditions. Stems, leaves and roots of these plants are fleshy and rich in watery mucus. The unusual morphological features that these plants have developed to enable them to survive in their harsh native habitats, set them apart from other plants and have given them rarity value when grown as ornamentals. They are hence displayed individually or grown in a rockery where a landscape of rocks and stones highlight their features and at the same time provide desirable contrast with other garden plants. Many members of Cactaceae, Crassulaceae, Aizoaceae, Euphorbiaceae, Asphodelaceae and Agavaceae belong to this group and are commonly referred to as rock garden plants.

The modern or climate controlled greenhouse requires massive inputs of energy and cost of claddings to grow crops out of season making them high cost structures. However, growing of certain horticulture crops and their nurseries out of season is happening in a sustainable way, using the heat from the sun and soil too. These are called passive solar greenhouses designed to retain as much warmth as possible. This concept has revolutionized vegetable production in Ladakh, high altitudes and other parts of the country in winter months.

The solar greenhouse is especially successful in China and are contributing mainly in vegetable production. Solar passive greenhouses are designed in different shape size using different local and other materials keeping in view the local climate and terrain. The poly houses mentioned earlier such as, low cost polyhoses, Ladakhi poly house, solar trench, polyench are passive solar green houses. Being the opposite of the climate controlled greenhouse, the passive solar greenhouse is heated all-year round with solar energy alone, even when the outdoor temperature drops below freezing point. The indoor temperature of the structure can be higher than the outdoor temperature. The temperature can be around 25°C (45°F).

Such greenhouses have been experimented by Defence Research and Development Organization through its establishment FRL (Field Research Laboratory) now DIHAR (Defence Institute of High Altitude Research), Leh/ Ladakh since 1962 during November to the end of March, the period during which the outside temperature drops there below freezing. The average temperature in the coldest month is between -15°C and -18°C. Over the several decades of research different and effective designs of such greenhouses have been standardized which are suitable to produce fresh vegetables like most of the leafy vegetables, tomato, cole crops and potato at sub zero temperature.

16.1 Entering Biological Data into Computer

After the forms have been designed, the database in ready for entry of biological data. Biological data is entered one record at a time. To enter the biological data, the user issues a command, which calls up and displays the appropriate form with blank fields. The user then keys in the data for each field in the appropriate spaces. In this manner, the user enters the data for the first record, then for the second record, and so on. In most database systems, the records are automatically assigned a number as they are entered.

16.2 Saving Biological Data into Computer

While entering data into the fields, the tab key or enter key is usually used to move to the next field. Pressing enter or tab key in the last field on the form saves the record in the database and moves to a new, blank form for the next record to be entered. In addition to using the tab or enter key to move forward through fields, one can directly go to any field on the form at any time by clicking on it with the mouse.

Methods of Weed Control

Prevention, eradication and control are the fundamental principles of weed control.First basic step is to prevent the infestation of a weed(s) in a locality in order to avoid their further spread. If one fails in preventing spread of weeds, eradication step must be adopted. Eradication is limited on a very small scale and adopted only when suitable methods of complete weed removal are available as eradication is cent per cent control of weeds alongwith its root system and other propagative parts. Further, if one fails in prevention and eradication techniques then different weed control methods must be strictly followed in which the objective is to bring down the weed population (with any method) to a level that economical crop yields are possible. The aim of each weed control method is to achieve reasonable good control of weeds. Following methods for controlling weeds are very common:

Preventive Methods

Try to prevent spread of weed seeds/vegetative parts with the adoption of following preventive techniques.