eChapters

4.1. What is pH?

pH is used to classify substance as acidic, neutral and alkaline, based on the prevalence of free H⁺ ions. Water molecules on autoionization dissociate to produce H⁺ and OH^- in equal number, although degree of dissociation is very small because of its stability (about one molecule in 10 million is ionized at any one time). H⁺ ions later attached to un-ionized water molecule to give rise hydronium ions, (H₃O)⁺

Introduction

Over the past few decades, soil resources have witnessed many changes driven by demographic pressure and climate change. It is necessary to have up to date soil information to monitor the state of soils health with time. Soil resource inventory provides information about the potentialities and limitation of soils for its proper utilization. Soil survey offers an accurate and scientific inventory of different soils, their properties and extent. An in-depth knowledge of the type of soils and their spatial distribution is a prerequisite for developing rational land use planning. Remote sensing is the science of obtaining information about the earth’s surface without actually being in contact with it. On the other hand, proximal sensing refers to remotely sensed measurements that are taken at the field or laboratory level. Both these processes involve an interaction between incident radiation and the targets of interest. Fundamentally, remote sensing data products are a representation of the functional response of objects to energy sources. These are typically spectra, which are acquired as a discrete series of reflectance measurements taken at different wavelength intervals, or bands. In the shorter wavelengths of the electromagnetic spectrum (visible part), features can be detected by virtue of reflected solar energy, while in the longer wavelengths (microwave, thermal parts), sensing of emitted energy works. Conventional soil sampling, and subsequent laboratory analysis are generally time consuming and costly. In this context, remote sensing plays a crucial role for studying soil resources. The term remote sensing is generally used for airborne and space borne acquisitions, whereas proximal sensing refers to ground-based laboratory and field measurements. Advances in the quantitative disciplines like remote sensing and proximal sensing have laid the foundations for a spatial exploration of soil-system dynamics within a landscape context (Pennock and Veldkamp 2006).

Introduction

The life support systems of a country and socioeconomic development of its people largely depend on soils. The soils are the most valuable natural resources for the society. It caters the basic needs of mankind by producing food, fibre and timber. It is therefore essential to know the distribution and extent of different soils and their qualities, potentialities and constraints for sustainable utilization of this valuable natural resource (Shyampura and Sehgal 1995). Information on distribution, potential and constraints of major forest soils are essential to design most appropriate soil management systems in order to increase productivity of forests as forests also offer excellent potential for poverty reduction and rural economic growth in India. However, unlike agriculture lands forest soils usually draw less attention and are ignored in spite of the fact that they nourish the lungs of the Earth. Soil quality is the most important factor in forest management decisions. Soils will determine productivity of a particular forest and management strategy. Knowing about forest soils can serve as a basis for forest management decisions, including land acquisition, species selection for planting, site preparation requirements, watershed development, fertilization prescriptions, stand density/ composition, and harvest timing, as well as decisions affecting land ownership and use.

Soil respiration is a good estimator of overall biological activity and thus is often used for describing soil quality. Soil respiration is estimated as the flux of CO₂ emitted from the soil surface. It represents the sum of CO₂ produced by root respiration and by heterotrophic decomposition. This procedure is a laboratory method where soil is incubated for a given period of days and the released CO is trapped by sodiumhydroxide (NaoH). This is also known as alkali trap method.

Introduction to Soil Restoration and Management

One of the most crucial elements for human survival is the availability of arable land. Desertification caused by land degradation has emerged as a serious global environmental threat to human well-being and sustainable development in recent years because of both climatic shifts and an increase in human activities that have direct impacts on soil. It has been widely alarmed by the United Nations Convention to combat desertification and has shown considerable interest in this issue (UNCCD, 2015). Soil degradation is used to describe the transformation of arable land into unproductive land because of natural processes, typically accelerated by human activity (Lal, 1993).

Introduction

 Salinity is a form of salt that occurs naturally within soils or water. When soil

becoming salty form that is called salinization, it can be caused by mineral

weathering called as natural process but it can be caused by irrigation called

as artificial process. Saline or salty soil have a high salt content like sodium

chloride (NaCl also called table salt). Salinity is like- abiotic stress for plants

and reduced the plant growth but not for all because some of them crops are

survive in better way for growth and development such as barley, sugerbeet,

cotton and mustard etc. Basically, stress are two types-biotic and abiotic

stress. Abiotic stress are also called nonliving stress like- drought, salinity,

submergence, heat, cold and temperature that are affect to plant life cycle so

that are called as abiotic stress. Natural water and all types of soil both contain

soluble salts. Amount of salt affected to weather of soil, when excessive salt

present in soil and it adversely affects to crop growth and developments. Salt

affected soils exist under arid and semi-arid climates. Major constitutions of

soluble salt in soil are the cations and anions. Cations are containing sodium,

calcium, magnesium and anions are contains chloride, sulphate, carbonate and

bicarbonate. Saline soil have <8.5 pH, >4EC (dS/m) and <15 ESP. where EC

is eclectical conductivity that is measure of soil salinity and ESP stand for

Exchangeable sodium percentage.

Introduction

The objective of soil sampling is to obtain reliable information about a particular soil. The value of laboratory data in soil studies largely depends on effective sampling. Soil sampling is one of the most important aspects in the determination of the properties of the soil. Care in preparation and analysis can overcome the damages of careless or inappropriate sampling in the field (Bates, 1993). Errors arising from sampling are mainly related to spatial variability of the soil. While keeping in mind financial constraints, sampling procedures should be adopted properly to minimize the influence of spatial variability and to maximize the accuracy of mean plot values for the measured soil variables. The obtained soil data should be representative for the whole observation plot, taking into consideration the spatial variability of the soil within the plot.

Importance of soil sampling

Soil sampling and testing are done to provide an estimate of the capacity of the soil to supply adequate amount of nutrients to meet the needs of growing crops and information to its nature and problem. Traditionally, the goal of soil sampling is to develop a representative estimate of a field. A few grams of soil are actually used for the laboratory analysis. That small amount must represent the entire area for which the recommendation is to be made. The samples should be collected in such a way that it would represent the area for which recommendation is to be made.

Environmental concerns have brought nutrient management in floriculture under increased scrutiny. A goal of sound nutrient management is to maximize the proportion of applied nutrients that is used by the crop (nutrient use efficiency). Soil sampling is a best management practice (BMP) for fertilizer management that will help improve nutrient use efficiency and protect the environment. Soil sampling is also one of the most important steps in a sound crop fertilization program. Poor soil sampling procedures account for more than 90 percent of all errors in fertilizer recommendations based on soil tests. Soil test results are only as good as the soil sample. Once you take a good sample, you must also handle it properly for it to remain a good sample. A good soil testing program can be divided into four Operations: (1) taking the sample, (2) analyzing the sample, (3) interpreting the sample analyses and (4) making the fertilizer recommendations. This chapter focuses on the first step, collecting the soil sample, once you take a sample, you must send it to a laboratory for analysis.

1. The example of trisaccharide is—————————.

   a) Raffinose

   b) Maltose

   c) Glucose

   d) Sucrose

2. Betaoxidation of fatty acid was proposed by ———————.

   a) Rose

   b) Knoop

   c) J.B Sumner

   d) Bloor

India situated between the latitude of 8°04/ and 37°06/N and longitudes of 68°07 to 97°25, has a geographical area of 329 Mha. Physiographicaly, it can be divided into the three broad regions, viz., Peninsula (a triangular Plateau in the Deccan and South of the Vindhyas), Mountain region of the Himalalayas (Extra-Penninsula), and the Indo-Gangetic Plain separating the these two regions.

Geologically, a great part of the Penninsula is occupied by the gneiss, schists and other rocks of diverse nature. Red soils (Alfisols) generally predominate in this region. The western and central parts predominate in basaltic rock having Black cotton soils of different thickness (Vertisols Inceptisols). The mountain region shows the development of marine sediments of all ages especially in north of the Himalayas.

The vast Indo-Gangetic and other plains of Pleistocene origin are composed of alluvium of the great river systems flowing in this region. The alluvial soils of this region depend on the age of alluvia and degree of development.

Climatically, India shows three distinct seasons, viz. i) cool and mainly dry winters from November to February, ii) hot and mainly dry summers from March to June and iii) monsoon rainy season from mid June to September. Rainfall is received during June to September (from the south-west monsoon) and during December to February (from the north-eastern winds). The Western Ghats and the eastern Himalayas ranges receive maximum rainfall because of their alignment across the summer monsoon winds. The Indo-Gangetic plains receive moderate rainfall; Rajasthan receives little rainfall as the Aravallies lie along the path of the moisture- bearing winds.

Soil

Soil is a natural body of mineral and organic constituents differentiated into horizons usually unconsolidated, of variable depth which differs among themselves as well as from the underlying parent material in morphology, physical makeup, chemical properties and composition and biological characteristics (Whitney, 1982; Hilgard, 1892; Dokuchaiev, 1900 and Joffe, 1936).

According to Soil Science Society of America (SSSA, 1970) soil is the unconsolidated mineral matter on the surface of the earth that has been subjected to and influenced by genetic and environmental factors of parent material, climate (including moisture and temperature effects), macro and microorganisms and topography, all affecting over a period of time and producing a product, that is “SOIL” that differs from the material from which it is derived in physical, chemical, biological and morphological properties and characteristics. The unconsolidated mineral material on the immediate surface of the earth, that serves as a natural medium for the growth of plants.

Approaches of Soil Study

Pedological Approach : The origin of the soil, its classification and description are examined in Pedology. (From Greek word pedon means soil or earth). It is the study of soil as a natural body and does not focus on the soil’s immediate practical use.

Edaphological Approach: Edaphology (from Greek word edaphos means soil or ground) is the study of soil from the stand point of higher plants. Edaphologists consider the various properties of soil in relation to plant production.

Soil Science : The science dealing with soil as a natural resource on the surface of the earth, including pedology (soil genesis, classification and mapping) and the physical, chemical and biological and fertility properties of soil and these properties in relation to their management for crop production.

1.The fine earth covering land surface acts as a reservoir of nutrients and water Soil.
2.The word ‘Soil’ is derived from Latin.
3. Study of origin, classification, morphology of soil is known as Pedology.
4. The study of soils in relation to crop growth Edaphology.
5. The father of Soil Science Dokuchalev.

 

Important Points to Remember

• The active factor of soil formation is : Climate
• Black soils (Vertisols) are formed mainly from the weathering of: Basalts
• Which soils have the highest cation exchange capacity : Black soils
• Plants wilt when soil water content goes below: 15 bar
• Available phosphorus in fertilizer is the fraction: Water soluble + Citrate soluble P

 

INTRODUCTION

Soil-borne pathogens cause heavy losses to most agricultural crops. Repeated planting of a crop in the same piece of land results in a high inoculum build-up, which forces the farmers either to change the crop or the land. Thus, the search for new, effective, inexpensive and non-hazardous methods for the control of soil-borne diseases is a continuous one. Over the years, efforts have been made to manage the soil-borne pathogens by employing fumigants, chemical pesticides, biological control agents, different type of soil amendments and also by causing modifications in different cultural practices. But, pathogen control is often hampered by the fact that both the inoculum of the pathogens and the lethal agents applied to the soil are affected by the soil’s physical, chemical and biological environment. Keeping in view the bottlenecks with different methods of management of soil-borne pathogens; harnessing of solar energy i.e. soil solarization is an effective method to control soil-borne pathogens.

Abstract

Wilt of gladiolus caused by Fusarium oxysporum f.sp. gladioli is a serious disease in Himachal Pradesh and disease incidence ranged between 19.0 to 50.5 at different gladiolus growing areas of the state during 2002 and 2003. Soil solarization of the infected field by covering it with transparent  polyethylene mulch (25 µm) for 40 days in summer months (March-April) was found effective to control the pathogen in soil.  Soil solarization resulted in average maximum temperature of 39.9oC in 2002 and 41.4oC in 2003 with an increase of 11.9 and 9.8^ºC, respectively in comparison to unsolarized soil. Increase in the average maximum soil temperature was found lethal to the Fusarium wilt pathogen of gladiolus. Soil solarization for 40 days resulted in significant reduction (84.6 %) in the colony forming units of the pathogen at 5 cm soil depth in comparison to unsolarized control. Soil solarization also resulted in 63 per cent reduction in disease incidence, recorded increase in different growth parameter of crop and also resulted in early flowering of the spikes.

Vegetables have got an important place in agriculture development, human diet and economy of the country. All the developed and developing countries realized the importance of vegetables an essential diet due to medicinal and nutritional value for human health. There is a steady upward trend in vegetable production. China is ranking first in the world and currently produces 237 million tonne of vegetables. India has made a quantum jump in vegetable production securing the second position in the world. The total production of vegetable is more than 91 million tonne in the country. Diseases and pests are the most important factors for low vegetable production. Various fungi, bacteria, viruses, phytoplasmas, nematodes and weeds are responsible for causing diseases in vegetables resulting heavy reduction in yield and quality.

Soil structure is highly important for maintaining favourable conditions for water movement, aeration, root development and crop production. In irrigated agriculture, inappropriate management practices can cause structural degradation through compression, puddling, compaction and crust formation. This chapter examines the major processes responsible for deterioration of soil structure and their effects on soil physical properties and crop performance. Soil compaction is discussed in relation to agricultural machinery, pressure distribution, formation of compacted layers and restrictions to root growth and water movement. The chapter also explains soil crusting, its mechanisms, effects on seedling emergence and methods for evaluating crust strength. Slow-permeable soils, including Regur soils, highly permeable soils and soils with shallow water tables are considered from a management perspective. Appropriate management practices are emphasized to restore permeability, improve soil structure and maintain favourable soil-water relationships. The chapter provides an integrated understanding of structural degradation and its management for sustainable irrigated agricultur

Soil Structure Defined

Soil structure is defined as the arrangement of individual soil particles with respect to each other into a pattern. Structure describes the gross, over-all arrangement ofthe soil solids. In other words, soil structure is the ‘architecture’ of a soil.

Soils are composed of structural units, called “peds”. The peds consist of many individual particles, bound together by cementing agents like organic matter, clay and hydrous oxides of iron and aluminium. However, the strength of the bonds, the size and shape of the peds and the proportion of the soil particles involved in the peds differ considerably among soils.

Soil survey is essentially a systematic examination of morphological, a set of other variable soil characteristics, description, classification and mapping of soil in an area alongwith a report making an interpretation to predict their potentials for various uses particularly for crop production.

Activities of Soil Survey Soil survey is composed of the following activities –

1. Anticipation of soil variability - The initial activity of soil survey is obtained by classifying the surveyed data according to different land forms and existing land uses either through field traversing, or aerial photo or by satellite images of the concerned area.

2. Characterisation and classification – This is done on the basis of soil profile description supported with soil analytical data.

3. Soil mapping - This is performed by showing the distribution of types of soil or soil mapping units based on already classified soils with their landforms, and land uses or their combinations.

4. Interpretation - It is the process of making prediction about the potentials of soils for various uses like choice of farm practices – agriculture, horticulture, forestry, pastures etc. and their management practices.

In recent times, the interpretations cover a wide spectrum of soil uses, both for agricultural and non agricultural (sewage and human waste disposal, high way construction, water and gas supply, recreation, wild life, urban and industrial structures) and many specialized uses. Soil survey if correctly carried out according to scientific principles, can provide the data base for various interpretations. This is because the same soil properties determine the behaviour of a soil for a variety of different uses. For instance, the content of clay, silt and sand, the shrink and swell behaviour, the permeability of soil to water and air, content of calcium carbonate, salts, organic matter, gypsum, soil depth, depth of ground water, hard pan formation, co-efficient of linear extensibility, water holding capacity etc. are examples of such properties that are important to plant growth and these properties also strongly influence non farm uses. Some examples in support are

A hard or petrocalcic horizon or other slowly permeable layer (clay-pan) in a soil restricts the movement of air and water, thus adversely affecting the plant root growth. Such a layer limits the soils suitability for septic tanks and other onsite waste disposal. It also makes a poor sub grade for high way construction.

A soil high in soluble salts is a poor medium for plant growth; it is also corrosive to iron and steel structures, such as pipelines and fences, causing high maintenance and repair costs.

High organic matter content is generally favourable to plant growth, but it is a limitation for road construction.

The strongly gypsiferous soils (gypsum content >10%) are considered unsuitable for arable crop cultivation because of its dissolution under irrigated or even moderate rainfall and making the surfaces uneven through the developments of sink holes. Such soils are unsuitable for irrigation and drainage canal networks and also for construction of roads, bridges etc.

The shrink- swell soils of India (vertisols) because of summer monsoon rains are suitable for growing a “kharif” crop but are very dangerous for construction of roads, air strips, buildings, laying gas, water pipelines which get distorted, develop cracks and lead to sunken floors etc.

Soil survey is essentially a study and mapping of soils in their natural environment. It is the systematic examination, description, classification and mapping of soils of an area.

2.1. History of Soil Survey in India

The original investigations on Indian soils were carried out by Voelcker dates back to 1893 and by Leather to 1898.They classified the soils of the country into four major groups, namely the Indo-Gangetic alluvium, the black cotton soil or regur, red soil and laterite soil. Schokalskaya (1932) has published a soil map of India based on the Russian concept which describes 16 soil groups such as climate,vegetation, soil-forming materials, salinity, alkalinity, swamps and peats (Bhattacharyya et al. 2013). In 1935,Wadia and his co-workers collected a soil map of India with significance on geological formations and classified the soils as red, black (regur), laterite and lateritic soils of Peninsular India and also Indo-Gangetic Plains (IGP) which includes delta, desert, bhabar, terai and alkali soils. Vishwanath and Ukil (1943) published a soil map of India by placing the soils in different climatic zones for the first time. This was prepared by Imperial Agricultural Research Institute, New Delhi, and published in the year 1943. There were 17 kinds of soils identified, viz., deep black soils, black clay soils, black loamy soils, black sandy soils, red sandy soils, brown sandy soils, red and yellow soils, dark reddish brown soils, mixed soils (white and yellow), alluvium (Indus, Gangetic, Brahmaputra), coarse alluvium, soils of swamp lands, calcareous soils, usar soils, kallar soils, coastal alluvium soils and soils of Great Himalayan Ranges.

Soil survey works were started in 1954, in most of the states as a part of their agricultural development programme, and Bihar (Soil Survey and Land use Planning Scheme, Sabour) was pioneer. In 1954, the soil survey work was started under the leadership of Dr. P. P. Jha following the conventional procedures in Bihar (including Jharkhand) to delineate the soil associations based on geology, relief, physical and chemical characteristics of soils for the first time in India by the then Soil Survey Scheme at Sabour (Mishra et al. 2001; Mishra 2015, 2016). Meanwhile, the National Atlas Organization, Kolkata, prepared a soil map of India in 1957 classifying Indian soils into six major groups and 11 broad types. Murthy and Pandey (1983) applied the working principles of the USDA 7^th Approximation in classifying the Indian soils with available data on soil classes and thus used the US system for the first time at great soil group level, which was transformed into a soil map of India on 1:6.3 million scale. Mishra et al. (1994) attempted to propose “Fluvisols” as the 13th Order in USDA Soil Taxonomy for active floodplain soils frequently occurring in different parts of India and elsewhere. Mishra (2015, 2016) proposed a framework of Indian system of soil classification mainly based on land use options.

13.1. Soil survey and soil mapping

Refers to study and mapping of soils in the fields.

Process of classifying soil types and other soil properties in a given area and geo-encoding such information.

Draws information on geomorphology, theories of soil formation, physical geography, analysis of vegetation and land use patterns.

Primary data for the soil survey are acquired by field sampling and by remote sensing.

Remote sensing principally uses aerial photography (Illuminating the object/ target with pulsed laser light and measuring the reflected pulses with sensor), but LiDAR ( Light Detection and Ranging) and other digital techniques.

AERATION, SOIL: The exchange of air in soil with air from the atmosphere. The air in a well aerated soil is similar to that in the atmosphere; the air in a poorly aerated soil is considerably higher in carbon dioxide and lower in oxygen.

Introduction

Soil resource catalogue provides an insight into the capability and the constraint

of mapped area for its optimum exploitation towards developmental planning.

For this motive soil survey series as an essential tool. Soil survey is essentially

a study and mapping of soils in their natural environments and systematic

examination, description, classification and mapping of soil of area.Soil survey

contains a group of compound operation involving

•             To study important properties of soils and associated land features.

 •            Define taxonomic units through correlation and classifications of soils.

•             To establish and draw a border of different kinds of soils on standard

topographical base map through mapping of soils.

 •            Transfer of technology from research farm to farmer ‘s field under

different soil condition and management practices.

Soil classification, or soil taxonomy as it is called, is grouping of soils in an orderly and logical manner based on soil properties (differentiating characters) for the purpose of studying and identifying them. The following are the purpose of soil classification:

To organize our knowledge of soils

To bring out and understand the relationships among the soils

To remember the properties of soils

To learn new relationships and principles in different soil groups

Temperature is a fundamental property of usually used to characterize the thermal condition of a system. The growth of any biological system is optimal within certain ranges of temperature and inhibited or ceased beyond this boundary. In addition to plant growth, the significance of temperature on agriculture can be ascertained by its role on physical, chemical and biological processes occurring in soil. Therefore, to study these soil properties intensively measurement of soil temperature is essential.

10.1 Measurement of Soil Temperature

Temperature of any system cannot be directly measured. It can only be estimated by its influence on some properties (thermometric properties) which respond to the variation in the intensity of heat of that system. These thermometric properties include volume, pressure, length, electrical resistance, thermal emf of the matter. Instruments built to take the advantage of any of these thermometric properties of the matter are called thermometer.

15.1. Soil Temperature

Soil temperature affects plant growth directly; influences soil moisture, aeration, structure, microbial activity, decomposition of plant residues and availability of plant nutrients. Intermediate temperatures, near optimum for each crop, are the desirable temperatures for crop growth. Extreme temperatures are undesirable, lest crop growth would be retarded and weeds and germs may be favoured. Moderate daily variations are desirable as they lead to soil moisture distribution and aeration.

15.1.1. Factors Affecting Soil Temperature

The mean annual soil temperature is about 1°C higher than the mean annual air temperature. Soil temperature is influenced mainly by climatic conditions. The factors which affect the transfer of heat through atmosphere from the Sun also affect the soil temperature. The following are the factors that affect soil temperature:

Temperature is the measure of the thermal state of a body with respect to its ability to transfer heat. Soil derives its heat almost entirely directly from the sun and losses much of it back into the atmosphere. The major processes for heat transfer in soil are: Radiation, Convection, Conduction and Latent heat exchanges between soil and atmosphere. The most important source of which is the incident radiation supplying almost all the heat energy for the biosphere and also determines the thermal regime of soil. Soil temperature or thermal regimes of soil is an extremely important property of soil as it regulates plant growth directly and influences moisture and aeration status in soil, soil structures, microbial activities and decomposition of plant residues and the availability of plant nutrients . It is controlled mainly by its thermal properties and radiation exchange over the surface and their variations within the soil. The quantity of incident solar radiation and heating the soil depends on the several factors such as exposure and latitude, albedo, soil colour, slope vegetation and composition of soil.

Soil temperature is an important environmental parameter for plant growth and development. It has direct effects on microbial growth and development, organic matter decay, seed germination, root development, and water and nutrient absorption by roots. In general, the higher the temperature the faster these processes occur. Variation in soil temperature is much more pronounced because of varying characteristics and composition of soil.

The soil gains heat by absorption of solar radiation and longwave counter radiation from the atmosphere, downward transfer of sensible heat and horizontal transfer of heat from the surroundings. On the other hand, soil loses heat by longwave radiation to the atmosphere, upward transfer of sensible heat to air when the soil surface is hotter than air and with evaporation and horizontal transfer of heat from the column to surroundings.

The population of India is estimated to touch 1.4 billion by the year, 2025, which will need at least 300 million tonnes of food grain. This necessitates the production of additional food grain from the same land without loosing the production potential of the soil. This, in turn, requires extensive research to provide a scientific basis for enhancing and sustaining food production as well as soil productivity with minimum environmental degradation. In order to attain this it is essential that the amount of nutrients removed from the soil should be replenished through judicious use of fertilizers and manures. This needs a more comprehensive approach for fertilizer use, incorporating components like soil test, field research and economic evaluation ofthe results. Soil testing is one of the best scientific means for quick and reliable determination of soil fertility status. Soil test crop response study in the field provides soil test calibration between the level of soil nutrients as determined in the laboratory and the crop response to fertilizers as observed in the field for predicting the fertilizer requirements of the crop.

Objectives of soil testing.

Soil testing provides a sound information about the suitability, fertility and productivity of the soil. This enables the farmers to make the most profitable use of some of the costly inputs in farming. However, lack of information among the farmers about soil testing and their importance in management of resources necessitates that the work of soil testing should be taken extensively. Soil testing is a useful tool for making fertilizer recommendations for various crops and cropping sequences as well as reclamation of problem soils. Thus the major objective of soil testing are to identify the type of soil related problems like salinity, alkalinity, and acidity and to suggest appropriate reclamation/amelioration measures and to evaluate the fertility status in terms of available nutrients for making soil test based fertilizer recommendations.

Maximum potato yield occurs when sufficient P is available during early vegetative development and the entire period of tuber growth. Total plant P uptake increases rapidly during tuber initiation, levels off to a constant rate during tuber bulking, and ceases with plant maturation occurs primarily through the transfer of P reserves from the vine and roots. Phosphorus uptake by potatoes is relatively low compared with uptake of potassium or nitrogen but similar to uptake of sulfur. The amount of P in the soil solution that is readily available for plant uptake is very small compared with the total amount of P in the soil.

A general blanket application of fertilizer leads to its poor efficacy and wastage of costly resources as well as of environmental pollution. This becomes more relevant in case of P as unlike nitrogen applied P remains in soil and adds to its build up. In addition, this has resulted in severe imbalance of nutrients in soil (Kumar et al., 2009).

Keeping this in view, a multilocation experiment was conducted in the major potato growing states of India under the All India Coordinated Research Project on Potato to evaluate suitable dose of P based on soil test on P economy in potato (table 52). Exact quantification of phosphorus fertilizer based on soil test is very important.

Introduction

In order to cater to the nutritional needs of a rapidly growing population, it is imperative to increase food grain production on the same land while maintaining the soil’s productive capacity. This necessitates comprehensive research to establish a scientific foundation for enhancing and sustaining food production and soil productivity with minimal environmental impact (Rathore et al., 2010). Balanced nutrition extends beyond the application of nitrogen, phosphorous, and potassium in specific quantities through fertilizers. It entails ensuring that the soil contains the right proportions of available nutrients to meet the crop’s requirements for optimal yield (Rathore et al., 2010).

Scientific agriculture is the only solution for increasing productivity of various crops and the input resources most effectively. Fertilizer, the most efficient and often the most expensive input can be applied to crops on the basis of generalized state level fertilizer recommendations. However, state level fertilizer recommendations do not take into consideration fertility status of the field which is neither uniform nor constant and which varies from field to field. Sometimes more fertilizers are added leading to unnecessarily higher investment, while under another situation, inadequate quantities of fertilizers may be added, resulting in lower returns. Inefficient and imbalanced uses of fertilizers affect both soil health and agricultural productivity.

Therefore, the best and most effective method for fertilizer recommendation is soil testing. It is a mode of assessing the nutrient supplying capacity of a soil.

Sustainable agriculture warrants a wise management of natural resources and inputs to satisfy human needs in the fast changing scenario while maintaining, if not improving, the quality of environment. Soil as a natural resource is facing more and more serious degradation threats under modern agriculture. Incidence and expansion of multi-nutrient deficiencies in Indian soils owing to inadequate and unbalanced nutrient input through fertilizers is considered one of the major reasons for decline in factor productivity of crops. The problem of soil fertility depletion is spectacular across the soil types and agro-climatic zones, but it is more acute in intensively cropped areas, where annual nutrient removal by the crops often far exceeds replenishments. Recent diagnostic surveys indicate that in several high productivity areas of irrigated ecosystems like, Trans-and Upper Gangetic Plain zones, farmers are resorting to even excessive use of fertilizers, especially N, to maintain the yields at levels attained previously with lower fertilizer application rates. With an unabated deterioration in soil health in general, and soil fertility in particular, and a mounting pressure on finite land resources due to increase in population, the interest in soil fertility and soil health has revived due to several reasons:

Stagnation in growth rates of production and productivity of staple foodgrains - threat to food security

Decline in factor productivity, thus increasing cost of production

Nutrient withdrawals in excess of replenishment

Low nutritional value of food and feed grown on nutrient-starved soils - threat to nutritional security

Poor quality of produce fetching low price - threat to economic security

Introduction

It is well-known that soil testing is agronomically sound, beneficial and environmentally responsive tool for monitoring the nutrient as well as pollutant status of soils, and also for making precise fertilizer recommendations for various crops and cropping sequences. Soil testing with associated plant and water analysis is the only tool known which helps to control soil fertility. Nutrient supplying power of soils, crop responses to added nutrients and fertilizer and amendment needs can safely be assessed through sound soil testing programme. Monitoring of soil fertility, against depletion and accumulation of certain elements in toxic proportions over time, is also possible through appropriate soil tests. This also helps to economize on cost of fertilizers and also in increasing fertilizer use efficiency.

Soil texture refers to the relative distribution of sand, silt and clay on a sample of <2 mm size. It is an intrinsic soil property and basically refers to the particle size distribution in a soil. A number of physical characteristics and chemical properties of a soil are influenced by texture or particle size distribution. To estimate the content of sand, silt and clay particles, the soil samples are first brought into a dispersed state by mechanical and chemical treatments so that different binding agents are removed. In the dispersed soil samples, the soil particles settle down at a differential settling rate according to their size. In laboratory, the common methods for analysis for particle size distribution are : Buyoucos hydrometer method and International pipette method. In this chapter, the procedure of Buyoucos hydrometer method is described.

Principle

This method is based on the principle of variable rate of settling of particles as per their size and as described by Stokes’Law. Large particles shall settle fast. The measurement of density of the suspension is done at different times using a hydrometer (ASTM 152H-Type hydrometer is preferred). The measurement in this hydrometer is based on a standard temperature of 20 _oC and a particle density of 2.65 Mg m_-3 and the units are expressed in grams of soil per liter.The principal source of error in this procedure is the incomplete dispersion of soil clays as the clay particles are cemented by agents such as organic matter, CaCO and iron oxides. Incomplete dispersion results in low values for clay and high values for silt and sand. Thus, soils with higher organic matter (>1.0%) should be first treated with 6% hydrogen peroxide (H₂O₂) for removal of organic carbon. The rate of sedimentation is also affected by temperature and the density of the dispersing solution.

2.1 Particle Size Distribution Analysis

Soil is composed of inorganic particles and organic molecules of varying size and shape. The expression of the proportion of the different size inorganic particles is termed as ‘soil texture’. It is one of the most important basic characters being little changed by cultivation or other practices. Particles are arbitrarily distinguished into following groups on the basis of their diameters.

2.1. Particle Size Distribution Analysis

Soil is composed of particles of varying size and shape. The expression of the proportion of the different size particles is termed as ‘soil texture’. It is one of the most important basic characters being little changed by cultivation or other practices. Particles are arbitrarily distinguished into following groups on the basis of their diameters.

Physical properties of a soil greatly influence plant growth. The plant support, root penetration, drainage, aeration, retention of moisture and availability of plant nutrients are all linked with the physical condition ofthe soil. The physical properties of a soil which depend on the amount, size, shape, arrangement and mineral composition of its particles, also influence its chemical and biological behaviour.

Q. 1 If the forward speed of a tractor drawn seed drill is increased twice,
then the seed rate delivered will be
(A) Reduced to half            (B) Double
(C) Increased by four time (D) Remains the same

In modern times, soil tillage has emerged as an integral part of a crop system. Soil tillage or soil surface management has been found important in alleviating soil related constraints encountered in crop production. An important effect of soil tillage on crop productivity is through its influence on soil processes, soil Soil Tillage 39 properties and crop growth. At the same time, soil tillage has its impact on the environment e.g. soil degradation, water quality, emission of green house gases from soil related processes etc.

The plants draw water from the soil for growth and development. The soil acts a reservoir for soil moisture (Fig.5.1). The basic aim of a soil water balance model is to quantify the manner in which the water supplied to the soil either through precipitation and irrigation is disposed off. In the process, the soil water balance models were found to be extremely useful to determine the amount of water utilized by the crop for evapotranspiration.
The concept of water balance was originally developed by Thornthwaite, an American geographer and it formed the basis for development of more scientifi c advances due to its wide range of applicability including
• Choice of crops/ cropping systems based on water availability
• Irrigation scheduling
• Optimisation of limited water resources for higher productivity
• Characterization of droughts and agricultural droughts
• Assessment of crop yield and pre harvest forecasting of crop yields
• Designing irrigation projects
• Development of water storage structures
There are quite a large number of water balance models available in literature nowadays. Several of these models may be applicable for regions where there are developed. There were considerable efforts to develop water balance models can be used by the crop on daily basis in case of different crops as well. The choice of a water balance model to a large extent depends on the availability of data required for running the model. It may not be possible to cover all models available in

5.1 Kinds of Soil Water

The following re the three main classes of soil water:

(i)  Hygroscopic water. Water held tightly to the surface of soil particles by adsorption forces.

(ii) Capillary water. Water held by forces of surface tension and continuous films around soil particles and in the capillary spaces.

(iii) Gravitational water. Water that moves freely in response to gravity and drains out of the soil.

Water can move in the liquid and gaseous phases:

1. Liquid water

i) Saturated flow: Most pores are filled with water; water in this condition is tension free

ii) Unsaturated flow: Pores are partially filled with air; the water is under tension.

2. Water vapour

i) Diffusion: Water vapour moves by diffusion as a result of vapour pressure differences (partial pressure)

ii) Mass flow: Water vapour flows in a mass with other gases of the system in response to differences in total pressure.

The movement of water through soil is fundamental to irrigation efficiency, drainage, nutrient transport and plant water availability. This chapter examines the principles governing water movement in both saturated and unsaturated soil conditions. It introduces the movement of water through the soil profile and discusses saturated hydraulic conductivity as an important parameter describing the ability of soil to transmit water. Water flow under unsaturated conditions is considered in greater detail, including the relationship between soil-water content and hydraulic conductivity. The chapter presents the equation for unsaturated flow and describes experimental approaches for studying water movement. Unsaturated hydraulic conductivity, represented as K(θ), provides an important basis for understanding the changing ability of soil to transmit water as soil moisture conditions vary. The chapter also considers prediction of soil-water flux, linking theoretical concepts with practical irrigation and soil-water management. Understanding water movement helps in determining irrigation requirements, reducing water losses, improving drainage and maintaining favourable soil-water conditions for crop growth.

Plant Relationship with Soil in Climate Change

1. Gravimetric Moisture

Significance of Gravimetric Analysis

Gravimetric moisture analysis, being the foundation of soil water assessment, allows for a meticulous examination of the water content in the soil. The process involves obtaining a representative soil sample, subjecting it to controlled drying conditions, and determining the weight loss after moisture removal. This method not only quantifies the total water content but also helps in understanding the soil’s water-holding capacity and drainage characteristics. Gravimetric analysis is indispensable in precision agriculture, aiding farmers in optimizing irrigation schedules and preventing overwatering or underhydration.

5.1 Soil

Soil and water are the two most important natural resources required for crop production. Without soil, no crop can be produced even if there is availability of plenty of water. It is vital not only for agriculture but also very vital for sustenance of life. No building can stand on any place without soil. Soil gives foundation support for any building. The term ‘soil ’is defined in various ways depending on the general professional field in which it is used. However to an agriculturist, soil is the substance existing on the earth surface, which grows and develops plant life. It contains all vital elements including its inherent fertility contents that support the growth of plants. For an engineer, soil is the unaggregated deposits of mineral and organic particles covering major part on the earth crust. It includes widely different materials like boulders, sand, gravel, clays and silts. Soil is produced by the weathering of solid rocks. The formation of soil is due to geologic cycle continuously taking place on surface of the earth. The geologic cycle comprises weathering or denudation, transportation, deposition and upheaval, again followed by the above mentioned processes. Weathering may be natural or artificial. In natural weathering, physical processes like temperature changes, flow of water, ice, wind and rain play the role. In artificial weathering animals especially human beings interference causes soil erosion and formation. It is obvious that it takes hundreds of years to form one inch of soil.