eChapters

9.1 Introduction

Basically, for heating or cooling the space using solar energy, the solar energy is to be collected, stored and distributed properly in the space to be heated or removed from the space to be cooled. There are two basic approaches for solar houses, there are:

(a)Active solar house technology

(b)Passive solar house technology

In active approach, the solar energy is collected and stored in some separate solar energy collector and then energy is distributed in the space where heating is to be done using electrically operated pumps and fans coupled with radiator etc. The storage of solar energy in active solar house may be in the form of storage as sensible heat or storage as latent heat or chemical heat storage. As per requirement of heating the size of solar collector and storage system be decided. Generally, the active concepts of solar houses are used for heating purpose. Active concept can also be used for space cooling applications. Solar vapor compression and absorption system can be used for this purpose, essentially, this includes incorporation of solar heat collectors, thermal storage system, auxiliary heat supply system (to compensate intermittent nature of sun energy) and control systems. Further, there are three ways of solar space heating i.e. solar air systems, solar liquid systems and solar heat pump systems.

Introduction

In Indian Thar desert regions, excessive heat is the major problem that causes human and animal thermal discomfort. Space cooling is, therefore, the most desirable factor for the inhabitants. Various examples of dwellings responsive to climatic constraints are found in vernacular architecture throughout the world. Compact cellular layout with minimum external surface exposure to the sun, whitewashed surfaces to reduce absorptivity, blind external facades, courtyards, vegetation to provide humidity and shade, and heavy buildings constructed from high thermal capacity materials are common passive features in most of the arid regions. Wind towers for cooling ventilation are well known in Iranian and Middle East architecture, which along with cooling of the air by earth and water evaporation keep the building comfortable in hot periods. Building underground to take advantage of the large thermal storage capacity of the earth is also used in Tunisia and central Turkey.

9.1 Introduction

Solar energy can be directly converted into electrical energy through photovoltaic route. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1. They are reliable, convenient and durable.
2. It is green, sustainable and pollution free technology.
3. Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).
4. Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.
5. Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.
6. Considerable expected lifetime i.e. 20 years or even more.
7. No distribution system is required, because they are decentralized source of energy and located at the place of use.

8.1 Introduction

Solar energy can be directly converted into electrical energy. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1.They are reliable, convenient and durable.

2.It is green, sustainable and pollution free technology.

3.Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).

4.Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.

5.Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.

6.Considerable expected lifetime i.e. 20 years or even more.

Introduction

Agriculture has been the back bone of Indian economy and culture and it will be continued to remain as such for a long time in future. Parallel to this, energy security of a country is also very important and efforts have been given on renewable energy utilization since the fossil fuel based energy is depleting at a very fast rate. In agricultural fields, considerable amount of energy is used to do different field activities e.g. ploughing, irrigation through pumps, intercultural operations, spraying of agricultural chemicals for plant protection, harvesting, post-harvest processing etc. Therefore, there is also need to replace the conventional energy source with renewable sources to operate above mentioned agricultural activities.

Approximately, 35% of the crop production is damaged if pest and diseases are not controlled at right time. Uniform spraying of liquid formulations throughout the crop field is very important for effective control of pest and diseases. Using sprayer, liquid pesticide formulations are generally broken down to minute droplets of effective size for uniform distribution over a large surface area. Different types of sprayers are used in agricultural field based on different requirements.

Introduction

Water is the primary source of life for mankind and one of the most basic necessities for crop production. The demand for water to irrigate the crops is increasing. For sustainable production from agricultural farms, irrigating the crops at right stages is highly important. Even in rainfed situation, lifesaving irrigation during long dry spell has also been found beneficial for crop survival and to obtain the targeted yield. Considering the depletion of groundwater below the critical zone in most part of the country, energy intensive pumping for irrigation is not a viable option. Therefore utilization of available runoff water through surface storage systems followed by pumping may be a potential solution to achieve the set goal of ‘crop per drop’ mission. In this connection, micro-irrigation system including drippers and sprinklers is of great importance. However, ensured power supply is essential to operate the micro-irrigation system even in remote areas. Reliable solar photovoltaic (PV) pumps are now emerging in the market and are rapidly becoming more attractive than the traditional power sources. These technologies, powered by renewable energy sources, are especially useful in remote locations where a steady fuel supply or electricity supply is problematic. About 16 million electric pumps and 7 million diesel pumps are in operations in the country for irrigation purpose; however they are highly energy intensive. Moreover, diesel operated and electrified pumps directly or indirectly emit large amount of CO₂ gas in atmosphere and hence are not environment friendly. To meet the energy demand for irrigation, solar PV pumps have been introduced under the off-grid power generation category of National Solar Mission (NSM) with a target of 1000 MW by the end of phase II (2013-2017). The target has been revised in 2015 to a total grid connected solar power generation of 1,00,000 MW comprising 40,000 MW roof top generation and 60,000 MW grid connected solar power plants (Resolution of MNRE, Govt of India, No. 30/80/2014-15/ NSM dated 1^st July 2015).

The Sun is the primary source of heat to the Earth and its atmosphere. The heat received from other celestial bodies as well as the interior of the Earth is rather too significant. The distance that separates the Earth from the Sun is about 149.0 million km. The diameter of the Sun measures roughly about 1.3824 million km. The surface temperature of the Sun is estimated between 5500^o C and 6100^o C. (or 5762^o K).

The weight of the sun is about 1.9 X 10 30kg. The radius is 6.97 X 10 8 m or the diameter of the sun is 14 X 10 5 km. The mass of the earth is 6 X 10 24 kg, the radius is 6.4 X 10 6 m. The gravitational force of the earth is 9.81m/s². Whereas the sun‘s attractive force is 274m/s². This is 25 times higher than earth’s gravitational force.

Sun is the prime source of energy injected into the earth’s atmosphere. The sun is the nearest star to the earth. It is a hot ball of glowing gases at the heart of the solar system. Its radiant energy is practically the only energy source to the earth. Very small and insignificant quantities of energy are available from other sources such as the interior of the earth, the moon, and other stars. Without the sun’s intense energy and heat, there would be no life on earth.

The mean distance of the sun from the earth, also known as one astronomical unit (1 AU), is approximately 1.496 × 10⁸ km, though the distance varies as the earth revolves round the sun in an elliptical orbit. At this average distance, light travels from the sun to earth in about 8 minutes and 19 seconds. The energy of the sunlight supports almost all life on earth by photosynthesis, and drives earth’s climate and weather. The minimum sun-earth distance is about 0.983 AU and the maximum is approximately 1.017 AU. The earth is at its closest point to the sun (perihelion) on around January 3 and at its farthest point (aphelion) on around July 4.

The sun makes up about 99.86% of the mass of the entire solar system. The visible disk or photosphere has a radius of 6.599 × 10⁵ km, and the solar mass is 1.989 × 10³⁰ kg. The sun is a completely gaseous body. The chemical composition (by mass) of the outer layers of sun is 71 per cent hydrogen, 26.5 per cent helium, and 2.5 per cent heavier elements like oxygen, carbon, neon, and iron among others. Since the sun is not a solid body, different parts of the sun rotate at different rates. At the equator, the sun spins once about every 25 earth days, but at its poles the sun rotates once on its axis every 36 days.

Sun is the prime source of energy injected into the earth’s atmosphere. The sun is the nearest star to the earth. It is a hot ball of glowing gases at the heart of the solar system. Its radiant energy is practically the only energy source to the earth. Very small and insignificant quantities of energy are available from other sources such as the interior of the earth, the moon, and other stars. Without the sun’s intense energy and heat, there would be no life on earth.

NATURE AND PROPERTIES OF SOLAR RADIATION

The mean distance of the sun from the earth, also known as one astronomical unit (1 AU), is approximately 1.496 × 10⁸ km, though the distance varies as the earth revolves round the sun in an elliptical orbit. At this average distance, light travels from the sun to earth in about 8 minutes and 19 seconds. The energy of the sunlight supports almost all life on earth by photosynthesis, and drives earth’s climate and weather. The minimum sun-earth distance is about 0.983 AU and the maximum is approximately 1.017 AU. The earth is at its closest point to the sun (perihelion) on around January 3 and at its farthest point (aphelion) on around July 4.

3.1 The Sun

The Sun is a star. It is a huge, spinning, glowing sphere of hot gas. It appears so much larger and brighter than the other stars because we are so close to it. The Sun is the center of our Solar System and contains most of the mass in the Solar System. All of the planets in our Solar System, including Earth, orbit around the Sun. In sun the energy generation is a multi-step process of thermo-nuclear fusion reactions. In the thermo nuclear fusion hydrogen (four protons) combines to form helium (one helium nucleus). The mass of the helium nucleus is less than that of four hydrogen protons and mass having been lost in the reaction is converted to energy. The reaction is represented as

The process through which heat energy is transferred from a body at higher temperature to a body at lower temperature without any material medium between the two bodies is x called radiation. The outer surface of the the Sun is at higher temperature compared to the surface of the earth. Solar radiation is the electromagnetic energy emitted by the Sun. It is the primary source of energy for the Earth’s climate system, driving atmospheric and oceanic circulation, influencing weather patterns, and sustaining life through photosynthesis.2 This energy travels through space as electromagnetic waves, encompassing a broad spectrum of wavelengths, from high-energy gamma rays and X-rays to ultraviolet, visible, infrared, and radio waves. The portion of this spectrum that reaches the Earth’s surface is crucial for a multitude of processes, making thestudy of solar radiation fundamental to understanding our planet’s environment.  This introduction will lay the groundwork for exploring the characteristics, distribution, and interaction of solar radiation with the Earth’s atmosphere and surface.
5.1. Wave length of Radiation
The wavelength of radiation refers to the distance between two consecutive peaks or troughs of a wave. It’s a measure of the length of one complete cycle of the wave

The process through which heat energy is transferred from a body at higher temperature to a body at lower temperature without any material medium between the two bodies is x called radiation. The outer surface of the the Sun is at higher temperature compared to the surface of the earth. Solar radiation is the electromagnetic energy emitted by the Sun. It is the primary source of energy for the Earth’s climate system, driving atmospheric and oceanic circulation, influencing weather patterns, and sustaining life through photosynthesis.2 This energy  travelsthrough space as electromagnetic waves, encompassing a broad spectrum of wavelengths, from high-energy gamma rays and X-rays to ultraviolet, visible, infrared, and radio waves. The portion of this spectrum that reaches the Earth’s surface is crucial for a multitude of processes, making the study of solar radiation fundamental to understanding our planet’s environment. This introduction will lay the groundwork for exploring the characteristics, distribution, and interaction of solar radiation with the Earth’s atmosphere and surface.
4.1. Wave Length of Radiation
The wavelength of radiation refers to the distance between two consecutive peaks or troughs of a wave. It’s a measure of the length of one complete cycle of the wave (Fig. 4.1).

5.1 Introduction

Energy in the form of heat is one of the main energy requirements in domestic, agricultural, industrial and commercial sector of our economy. From an enduse point of view, solar thermal energy finds its application in these areas. Solar thermal energy devices convert radiant energy of the sun into thermal energy for different productive works. In fact, solar energy consists of infrared radiation, it is characteristics of infrared radiation that whenever it falls on any object, it converts into thermal heat energy.

The conversion of sun light into thermal energy is easily or conveniently achieved by means of a metallic or plastic cover, painted black with ordinary black board paint or having selected coating over it and covered with one- or double-glazing cover for transmitting solar radiation inside it. This metallic cover is known as absorber, below it either channels or pipes or passages for allowing entry of water or air are provided, through which heat energy is transferred to working medium either air or water. The absorber plate is covered with suitable thickness of insulating material on its back or sides for preventing loss of heat from the absorber plate. This complete system is enclosed in an airtight box. When exposed to solar radiations, the blackened metallic surface absorbs solar energy and converts into heat. This heat could be used for cooking of food, heating of water and air, evaporation of moisture form the grains etc. In fact, absorber works on the principle of black body, which absorbs maximum and a good absorber, is a good emitter. Hence generated heat could be utilized for different applications.

Greenhouse essentially functions based on solar energy to control environment for protecting cultivation from adverse condition. Computer simulation and mathematical modeling are important tools for determining the energy efficient design as well as predicting the overall system performance. The greenhouse climate may be used for crop drying, distillation, biogas plant heating, space conditioning, and aquaculture. Thus, any required configuration of greenhouse can be thermally modeled for predicting and optimizing the performance. The solar energy based greenhouse modeling are useful in evaluation of various applications like greenhouse heating, greenhouse cooling, greenhouse drying and aquaculture greenhouse. Greenhouse clubbed with ground air collector increase in plant and ambient temperature of 5–7°C during night in winter. Whereas, using evaporative cooling pad with greenhouse reduces the ambient temperature of 4–5°C during midday summer. A greenhouse can be very well used for large-scale crop drying, while not in use for cultivation. Some other applications such as covered crop drying and aquaculture are also discussed.

Abstract

The primary commercial energy sources such as coal, oil and natural gas poses an enormous challenge to our development goals including environmental degradation, as India is not well endowed with these exhaustible natural resources. Further, these conventional sources are also not available in right quantity and producing environmental pollution manifold in land, air and water. There are number of unit operations in food processing and value addition consuming bulk of conventional energy sources where renewable energy sources can easily be integrated for energy conservation and environment protection. There is significant potential for application of Renewable Energy Sources in different unit operation of food processing including drying of food products for energy conservation and for reducing hydrocarbon emissions.

Introduction 
In a time when the world is in dire need of sustainable energy solutions, investigating biofuels becomes an essential path to supplying the always expanding supply[1]. This book chapter explores the dynamic world of solid and liquid biofuels, providing a thorough analysis of their properties, methods of production, uses, and wider ramifications in relation to renewable energy sources. Setting the scene, the introduction clarifies the role of biofuels in the larger context of renewable energy. Exploring solid and liquid biofuels becomes critical as the globe struggles with issues like climate change, depleting fossil fuel reserves, and the need to switch to cleaner energy sources[2]. These biofuels, which are defined as energy carriers made from biomass, offer a viable substitute and have the capacity to both reduce environmental impact and promote energy security. As the chapter progresses, biofuels are divided into two main categories: liquid and solid. Biofuels that are solid, such as wood, agricultural leftovers, pellets, and briquettes, serve as a starting point for investigating alternative energy sources. This section walks readers through the complexities involved in producing solid biofuel, including harvesting, pre-treatment, and creative pelletization methods. By doing this, it highlights the renewable nature of solid biofuels and their ability to lower greenhouse gas emissions, highlighting their benefits for the environment. Simultaneously, difficulties associated with its application, ranging from administrative worries to land use issues, are examined closely. Turning its attention to liquid biofuels, the chapter tells the story of ethanol, biodiesel, and advanced biofuels. By examining the choice of feedstock, manufacturing procedures, and real-world uses, it highlights the adaptability of liquid biofuels in the energy system. Although they are not without difficulties related to land use, food production, and water use, their ability to function with current infrastructure and their critical role in improving energy security stand out as distinguishing characteristics[3].

Introduction

The huge nutritious potential of agricultural based byproducts has generated an interest of nutritionist for utilizing them in efficient ways in order to improve the production of animals. In this concern, solid state fermentation (SSF) is a promising and novel technique. The lignocellulosic structural characters of plant residues provide them a solid support and act as substrates for the microbial fermentation to produce certain value added products through SSF. The scope of SSF in the field of animal nutrition is wide, in terms for the production of enzymes, bioactive components, organic acids, vitamins, and feed additives, bio-transforming products, biological degradation and detoxification of agricultural residues/wastes. 

Introduction

One of the major problems being faced by cities and towns relate to management of municipal solid waste (MSW). Waste quantities are increasing day by day due to the increasing population and the municipal authorities are not able to upgrade or scale up the facilities required for proper management of such wastes. In many cities and towns, garbage is littered on roads and foot-paths. Citizens are also not accustomed to use the available storage facilities (dust bins) set up by the authorities. At large, lack of organized system of house- to-house collection of waste has created the littering habits. By and large, hardly we can see any city/town complying with the Municipal Solid Wastes (Management and Handling) Rules, 2000 in ‘totality”. As per information provided by Central Pollution Control Board (CPCB), 1,27,486 TPD (Tons per day) municipal solid waste was generated in the country during 2011-12. Out of which, 89,334 TPD (70%) of MSW is collected and 15,881 TPD (12.45%) is processed or treated.

In spite of various measures taken towards the proper waste collection, segregation and disposal, proper waste processing units were established as per the following details as per CPCB. The waste processing technologies reported in the country are; composting, vermi composting, biogas plant, RDF- pelletisation and others. Some of the sepelletization plants are associated with power plants for generation of electricity. However, mechanical composting and vermi composting are more popular in the country.

Waste is not actually waste but is the by-product of various activities of human life. The unclean handling of these wastes creates problem for public health departments and local bodies. The classification of waste depends on the agencies that classify these wastes according to the area of interest and method of disposal viz. medical field, agricultural field, local bodies, industries etc.

In the present paper, the emphasis is given to the classification based on agricultural activities which includes a) Agricultural marketing waste b) Meat and fish marketing waste.

3.1. SOLID WASTE MANAGEMENT

Solid waste management includes the transportation, processing, recycling and disposal of our waste materials. We live in a disposable world in many ways with the modernization and convenience of our world we have cluttered it with our refuse.

Solid wastes are all the wastes arising from human and animal activities, that are normally solid and that are discarded as useless or unwanted materials. It consists of the highly heterogeneous mass of discarded materials from the urban community as well as the more homogenous accumulation of agricultural, industrial and mining waste.

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

Overview
Humanity has produced trash since the beginning of time, whether it is from the bones and other parts of the animals they kill for food or the wood they harvest to build their carts. As civilization developed, garbage was produced that was increasingly sophisticated in character. The world of consumers emerged around the close of the 19thcentury as a result of the industrial revolution. The production of non-biodegradable solid waste led to an increase in pollution not just in the air but also on Earth itself. The rise in solid waste was also primarily caused by urbanization and population growth.
Definition of Solid Waste
Glass crockery containers, plastic containers, sludge, vehicle parts, and mounds of crop wastes are among the solid waste materials. These gather in public areas and hinder people’s regular activities.
Every family produces waste or rubbish on a daily basis. We usually toss away items that we no longer need or have any use for, which puts them in the garbage category. Depending on where it comes from, solid waste can take several forms. Understanding the proper ways to handle the trash produced has become crucial in today’s dirty world. One crucial technique for managing municipal solid waste is segregation. Representation provides a good understanding of segregation at source. Composting is a crucial waste management and treatment technique.

Solid wastes, the unavoidable consequences of civilization, are the useless and unwanted heterogeneous solid materials discarded by human being. Human greed is the major factor in creation of unwanted solid wastes. With increase in human population and its demands, there is an increase in production of various types of wastes. When human being did not come to the earth there was very little wastes like tree leaves, animal excreta or dead parts which nature used to digest and produces something beautiful every time. Still there are certain remote areas free from wastes where human being could not reach due to inaccessible condition of terrain, forests and islands. Now–a-days wastes are found even in the top of Mt. Everest or in the interior of Antarctica.

Solidago, commonly known as goldenrod, is an attractive filler-type cut flower valued for its bright yellow inflorescences and commercial potential. This chapter discusses its origin, taxonomy, botanical characteristics, genetics, varieties and environmental requirements. It explains seed propagation for breeding and vegetative propagation through rhizome suckers for commercial multiplication. Climate, soil, planting, nutrition, irrigation and cultural management are described, followed by pest and disease control. Harvesting, postharvest handling, grading, vase life and yield are also addressed. The chapter highlights commercially important cultivars and the crop's suitability for professional cut flower production and export markets.

Principle

Dried milled samples are extracted successively with diethyl ether, 0.5 percent ammonium oxalate solution, NH₂SO₄ and 72 percent sulphuric acid. Soluble carbohydrate in the ammonium oxalate extract determined with anthrone and hydrolysed pentosans and hexosans in the combined N H₂SO₄. Seventy two percent sulphuric acid extract are determined with aniline acetate and chromotropic acid respectively. The method gives a maximum variation of 4 percent from the mean of duplicates with each carbohydrate component. The residual material is ashed to obtain crude lignin and a nitrogen correction applied.

Soluble carbohydrate - this group, which includes sugars, oligosaccharides, and the fructosans of grasses, provides a source of nutrients  readily available to livestock.

Principle

Dried milled samples are extracted successively with diethyl ether, 0.5 percent ammonium oxalate solution, NH₂SO₄ and 72 percent sulphuric acid. Soluble carbohydrate in the ammonium oxalate extract determined with anthrone and hydrolysed pentosans and hexosans in the combined N H₂SO₄. Seventy two percent sulphuric acid extract are determined with aniline acetate and chromotropic acid respectively. The method gives a maximum variation of 4 percent from the mean of duplicates with each carbohydrate component. The residual material is ashed to obtain crude lignin and a nitrogen correction applied.

Soluble carbohydrate - this group, which includes sugars, oligosaccharides, and the fructosans of grasses, provides a source of nutrients  readily available to livestock.

I. Definition

Solute transport in plants, translocation, primarily occurs in the phloem, but it can occur in the xylem.

II. Solute Transport in the Xylem

Some solutes are transported in the xylem

Water and dissolved ions are the main substances in vessels/tracheids

These materials are transported via transpiration stream

Xylem sap may also contain organic materials, usually in relatively low concentration (with a notable exception being maple sap in the spring which is comprised of 2% or more sucrose).

Substances move at different rates depending on matrix effects, metabolic needs, etc.

Standard solution: Standard solution is defined as a solution whose strength is known. e.g. 1 N solution.

Molar solution: Molar solution can be defined as a solution containing the number of moles of a solute (substance) i.e. molecular weight in gram per litre of the solution. e g. Mol. wt. of NaCl 23+35.5 58.5,

So 58.5 g NaCl per 941.5 ml of water= 1 M NaCI solution. Molarity is generally designated by M.

Molal solution: Number of moles of a substance/solute per litre of solvent makes a molal solution. Mobility is generally designated by m.

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

Solvent extraction is mainly used to remove dissolved substances from solutions or soluble material from solids /powders/ solid mixtures. Solvent extraction is explained using distribution law or partition law. The law states that if to a system of two liquid layers made up of two immiscible liquids/ slightly miscible liquids is added a third substance soluble in both layers , then the substance distributes itself between the two layers so that the ratio of concentration in one solvent to the concentration in the second solvent remains constant at a constant temperature.

India has witnessed a phenomenal increase in foodgrains production since Independence and from a food deficit state producing about 51 million tons in 195051 it become food surplus country with a record harvest of more than 250 million tons in 201112. This particular year also saw a remarkable record production of pulses at about 18.1 million tons. However, to meet the increasing demand of the continuously rising population about 23 million tons of pulses have to be imported every year costing the country about Rs.3000 crores in foreign exchange. Despite the changes in the dietary habits in which the large middle class has moved away from traditional cereals towards high value dairy, meat, fruits and vegetable products, pulses in India are still considered an important source of proteins, particularly for the poor. Pulses are not only an excellent source of protein (2040%), carbohydrates (5060%) and minerals (24%) but also provide calories almost equal to that of cereals energy to the tune of 300 to 540 Kcal/ 100g (Ofuya and Akhidue, 2005). Thus, pulses play an important role in achieving food and nutritional security for small and marginal farmers. However, the per capita availability of pulses has been declining over the time – it has declined from 60.7 gm/ day in 1951 to about 32 gm/day in 2010 – mainly due to stagnant production (except in recent years), rising demand for consumption and other uses. Pulses not only are used for consumption, but also play an even greater role in maintaining and enhancing soil fertility through nitrogen (N₂) fixation. Though the estimates of Nfixed by pulses depends on crop species, soil type, agroclimatic zone and crop management practices, it was reported that early, medium and long duration pigeonpea varieties fix 7, 55 and 69 kg/ ha¹, respectively, in Vertisols of Patancheru (Kumar Rao and Dart, 1987). Pulses ^N2 are grown not only as sole crops but also as intercrops and the biological nitrogen fixation (BNF) of pulses substantially benefits the associated or succeeding crops in terms of nitrogen contribution (1668 kg/ N₂ ha¹ for succeeding cereals). Thus on a conservative estimate, the BNF (@46 kg/N₂ ha¹) by pulses, excluding the intercrop area, alone amounts to 1.06 million tons annually.

I. FILL UPS

1. Somatic embryo encased with artificial endosperm and protective cover is called _____.
2. The term artificial seed was coined by_____.
3. The artificial seed technology was patented by_____.
4. The most common gelling agent used for artificial seeds is_____.
5. In desiccated system, the artificial seeds are coated with _____.

ABSTRACT

Immature zygotic embryos were isolated from field grown papaya fruits harvested at 90-105 d post-anthesis. The embryos were placed on half-strength Murashige Skoog (MS) medium supplemented with 2, 4-D (2.0 mg l^-1) and cultured under dark for a period of 2 months. The frequency of callus formation was around 66%. After 2 months, calli were transferred onto a half-strength MS basal medium and cultured for 3 months with frequent subculturing (once in 3 wk) on the same medium. The frequency of somatic embryo formation was around 36.6%. The somatic embryos on MS medium supplemented with BAP (0.4 mg l^-1) and NAA (0.02 mg l^-1) germinated and produced shoots. The emerging shoots of 2-3 cm height with 2-3 trilobed leaves were placed onto an MS basal liquid medium with IBA (1.0 mg l^-1) for root induction. The plants developed with shoots and roots were planted in a pot-mixture (sand:soil:FYM) containing VAM.

A. Somatic Embryogenesis
 
In plant tissue culture, the developmental pathway of various well organised, small embryoids resembling the zygotic embryos form the embryogenic potential somatic cell of callus tissue or cells of suspension cultures is known as somatic embryogenesis. The capability of somatic cell of a culture to produce embryoids is known as embryogenic potential.

Embryoid: Embryoid is a small, well organised structure comparable to the sexual embryo, which is produced in tissue culture of dividing embryogenic potential somatic cells.

ABSTRACT

Techniques could be standardized for the induction, initiation, maturation and germination of somatic embryoids from the nucellar tissue isolated from 30-45 day old fruits of mono embryonic mango variety Neelum and poly embryonic variety Vellari Manga. The treatment half strength Murashige and Skoog basal medium containing 2,4-D 5.0 mgl^-1, GA3 5.0 mgl^-1, glutamine 400 mgl^-1, coconut water 200 mll^-1, activated charcoal 500 mgl^-1, sucrose 60 gl^-1and agar gl^-1was found to be the best in induction of embryogenic callus. The treatment 2,4-D 4.0 mgl^-1 + BA 1.0 mgl^-1+ GA3 5.0 mgl^-1in half strength MS basal medium supplemented with glutamine 400 mgl^-1, casein hydrolysate 500 mgl^-1, sucrose 60.0 gl^-1, coconut water 200 mll^-1and agar 6.0 gl^-1was the best in initiating somatic embryos from the induced nucellus of the three varieties. In the variety Neelum BA (8.0 and 16.0 mgl^-1) and kinetin (8.0 to 32.0 mgl^-1) were as effective as 2,4-D in inducing somatic embryogenesis. Polyembryonic variety Vellari Manga showed better response to induction treatments than the mono embryonic varieties. B5 major salts with MS minor salts in combination with 40 gl^-1sucrose, 10 gl^-1PVP, 200 mll^-1coconut water, 5.0 mgl^-1 ABA, 100 mgl^-1 casein hydrolysate and 6.0 gl^-1agar were the best suited for the maturation of the somatic embryos. The positive influence of cobalt chloride, casein hydrolysate and coconut water on the germination of embryoids of both mono and poly embryonic mango varieties could be well established. A basal medium consisting of B5 major salts and MS minor salts supported the highest percentage of germination of somatic embryoids in Neelum and Vellari Manga. However, abnormalities in germination were observed in most of the cases. Excellent germination of somatic embryos was observed in a liquid medium consisting of half strength B5 macro salts and full strength MS micro salts and supplemented with GA3 1.0 mgl^-1+ glutamine 400 mgl^-1 + sucrose 30gl^-1.

North Eastern Himalayan Region comprises mostly of seven states viz. Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland and Tripura (Gill, 2005). This Himalayan Region stands entirely different from the rest of the country not only in language, dress, food habits and festivals but also differs in agricultural practices. Among agricultural practices shifting cultivation locally known as ìJhumî or ìBunî is the most important. According to Ministry of Agriculture, Arunachal Pradesh stands first in the ìJhumî cultivation followed by Assam, Manipur, Meghalaya (Agnihotri, 2003). In Meghalaya, the problem has assumed an epidemic proportion in Gargo hills where tracts of forests are burnt. The farmers of Khasi and Jainta Hills usually practise the ìBunî cultivation.

When dealing with the evaluation of the feeds and calculating the requirements of energy and protein for ruminants, it becomes necessary to inter convert values among different systems and units. Since the accuracy of conversions/equivalents and formulae used for calculating the requirements vary with different systems/constants used, the conversion factors and formulae given here can be used only as guidelines for routine purposes in laboratory or farms in feed formulation.

Crop growth rate (g m^_-2 day^_-1)

Crop Growth Rate is referred to a whole crop, so you need to consider the area of the ground where crop is present. It is measured as mass increase in crop biomass per unit ground area per unit time.
Equation for that is, CGR= W₂-W₁ / t₁-t₂

In nature, microbes are found as a mixed population. The types that encounter the most favourable environmental and other growth conditions emerge in abundance while others that find the environment less favourable are fewer in number. However, for any kind of study on them or for their use as a pure species, they have to be separated from other species. The nutritional media or culture media are different for different species. As the medium is specific for certain species, it checks or restricts the growth of other microbes for which it may not be suitable. However, some growth of and contamination by unwanted species may occur.

Receiving student award from Dr IP Singh Dean Veterinary Sciences
Receiving student award from Mrs (Dr) Shinade Acting Vice-Chancellor
Dr Rajendra Prasad award of ICAR-2002 (Union Agriculture Minister Shri Ajit Singh is giving award to Prof RS Chauhan in the presence of Shri Hukum Dev Narayan Yadav Minister of state and Secretary agriculture)
Receiving “Gopal Gaurav award” from Shankaracharya Shri Raghvendra Saraswati ji maharaj of Shri Ramchandrapuram muth, Shimoga Karnataka ^^xksiky xkSjo** lEeku izkIr djrs gq,
Dr Jeff G Vos Congratulating Prof RS Chauhan on becoming advisor WHO at NIPHE Bilthoven, The Netherlands.
 Dr RS Chauhan is with the Union Agriculture minister Shri Sompal Shashtri ji in a function of Prakrati Bharti at Kota (Rajasthan)
Dr RS Chauhan is with the Union Science & Technology minister Shri Bachi Singh Rawat ji in a function of SIIP at CIMAP Lal kuan (Uttarakhand)

Q.1 In random effect model, the treatments are taken as a random sample of treatments drawn from a large group of T treatments.

Q.2 In varietal trials for plant breeding or genetics, the appropriate statistical model is not the random effect model.

Food Safety and Standard Authority of India (FSSAI) has adopted the standards of Fruit Product Order (FPO).

Chutney

It is a product prepared by cooking the fruit pulp with added salt, sugar, spices, acetic acid and fruit to a suitable consistency so that it contains TSS not less than 50% and fruit part not less than 40% as per FSSAI specification. Sugar, salt, spices, acetic acid all act as partial preservatives. Preservatives may also be added in chutney for increasing its storability. Generally no artificial colour and flavor are required to be added.

Sauce

Sauce is a product similar to ketchup, prepared from pulps of tomato or other fruit/vegetable, having TSS not less than 15% and cooked to a suitable consistency with added sugar, salt, spices and vinegar. Sugar, salt, spices, acetic acid all act as partial preservatives. According to FSSAI specification fruit sauce should have minimum of 15% TSS and 1.2% acidity. Preservatives and colours may also be added for increasing of appearance and storability.

In meteorology, we often use some of the physical parameters to explain the physical processes taking place in the atmosphere. These parameters must have already appeared in the earlier chapters. However, these are given in this chapter to enable the readers to get acquainted once again.

16.1 Momentum

Momentum is defined as the product of mass and its velocity. In S.I. system units mass is expressed in kilograms and velocity in meters per second.

Momentum = Mass x Velocity

Units for momentum (S.I. system) = kg. m/sec

In C.G.S. System, mass is expressed in grams and velocity in cm/sec.

Units for momentum (C.G.S System) = gm.cm/sec

Abstract

The North-West Himalaya is bestowed with rich genetic diversity of minor temperate fruits representing the genera viz. Malus, Prunus, Pyrus, Rubus, Ribes, Sorbus, Cotoneaster, Myrica, Corylus, Crataegus, Punica, Hippophae, Elaeagnus, Viburnum, Vitis, Ficus, Citrus, Ziziphus, Morus,, Olea, etc. These species are known for their hardiness, adaptability to wastelands and tolerance to biotic and abiotic stresses. Apart from their easy availability, they assure some sustained yield and make our diet more diverse. Some indigenous species having potential for diversifying temperate fruit production are Pyrus pyrifolia, Diospyros lotus, Rubus ellipticus , R. lasiocarpus, R.. fruiticosus, Corylus colurna, Citrus pseudolimon, Hippophae rhamnoides and Pinus gerardiana. Some of the exotic temperate fruits viz. pineapple guava (Feijoa sellowiana), Chinese ber (Ziziphus jujuba), Japanese persimmon (Diospyros kaki), Rubus spp., Ribes spp, quince (Cydonia oblonga), medlar (Mespilus spp.), pecan nut (Carya illinoensis), hazelnut (Corylus avellana), husk tomato (Physalis spp.) and tree tomato (Cyphomendra betacea) have shown good performance at National Bureau of Plant Genetic Resources  Regional Station, Shimla.