eChapters

Rose (Rosa centifolia Linn) belongs to the family Rosaceae is known as flower of love which is cultivated throughout the world. The traditionally grown rose f lowers are fragile wild, bloom only for a limited period. They are found in a few colours of red, pink, deep crimson vis-a-vis white colour. However, with the development of the clonal technology, tissue culture and hybridization, a wide variety of roses can be grown having different colours, fragrances, blooms and shapes. It is point to mention that from the 200 species of roses originally found there are more than 30,000 varieties available these days.

The cultivation of rose is believed to have started about 5.000 years ago in China. Initially, Romans started to cultivate the rose flower using organic manures for medicinal purposes and then tor aesthetic values. Briefly their medicinal values have been mentioned separately as reported by Gupta et al 2016. It is not until late 8th century that cultivation of roses was introduced into Europe. Unlike Europe and America where rosses have limited flowering period during the summer.

Ergonomics, also known as human factors engineering, is a multidisciplinary f ield that focuses on designing and arranging environments, products, and systems to fit the people who use them. The primary goal of ergonomics is to enhance efficiency, safety, and well-being by optimizing the interaction between humans and their work environment.

Key Aspects of Ergonomics

Physical Ergonomics

Posture : Examining how people sit, stand, and move to prevent musculoskeletal disorders and discomfort.

Repetitive Motion: Addressing issues related to tasks that involve repetitive movements, which can lead to strain injuries.

Farm electricity refers to the electrical systems and infrastructure used in agricultural operations to power various equipment, machinery, and facilities. The electrification of farms has become essential for modern agriculture, enhancing efficiency, productivity, and the overall management of farming operations. Description about the farm electricity:

Components of Farm Electricity

Power Supply: Farms are typically connected to the electrical grid, providing a reliable power supply. In some remote areas, farms may rely on off-grid solutions, such as diesel generators, solar panels, or wind turbines.

Power Distribution: Electricity is distributed across the farm through a network of power lines, transformers, and distribution panels. The distribution system ensures that power is delivered to various farm structures and equipment.

Any perturbation and chaos in ecological setting and its functioning will lead to serious disruptions disruption in both resilience and livelihood. This is exactly what is being confronted by Indian Agriculture upfront. Our soils are brutally extorted to accept the harsh reality that close to 70 per cent of our cultivable land is starving of organic carbon. The ground water depletion in the name of modern agriculture has been another testimony of our ruthlessly prodigal agriculture amounting to serious water crisis. Every five seconds equivalent to a football ground, the golden acres, are vanishing with fertile soil from the chest of the planet. Thus, soil erosion amounting to almost 15 tons per hectare per year in Indian agriculture is not only alarming but also humongous. The losses of biodiversities including floral and faunal counts are adding blistering blistering barrier for our food production system. In the name of green revolution, we turned wrongly illusioned with the ability of so called high yielding varieties and have driven out our valuable landraces to invite gene myopia and gene erosion. This has got a catastrophic consequence. The stagnation of production and productivity in food sector is going to be the bleak indicator of our fragile and frail ecological resilience in the entire production system. But the down to earth reality is that apart from experts, most of our farmers are not aware of this threat, sensitized either. The book has assimilated the data in a delving manner, and real time fact of ground reality that reveals an interesting interpretation of farmers' perception on the rhetoric’s of ecological resilience in India.

Biomimetics is defined as the study of the formation, structure, or function of biologically produced substances and materials and biological mechanisms and processes especially to synthesize similar products by artificial mechanisms which mimic natural ones.

Biomimetic materials and molecules have been applied in many of the potential research areas in medical and dental sciences and highlight their foundation from plants, animals, or microbes that can be used to treat human disease.

A bioactive/biomimetic material and biocompatible material is an artificial or natural material used to change part of the living system or to function in internal contact with living tissue. Bioactive materials can interact with living tissues or systems.

There are several types of biomimetic materials like

Osteogenic Materials

Osteoconductive Materials

Origin of Systematics

In Vedas (1500 BC), Ramayana (1900 BC), Mahabharata (1400 BC), and Upanishad (350 BC) mention had been made about various animals. The number of known species of animals is much greater than that of plants and has been estimated at about more than one million. When subspecies are included, the number may double to more than two million named forms of animals. The new animals are being described at the rate of about 10,000 per year. Metcalf (1940) estimated that one and a half million species names are already applied while Silvestre (1929) calculates an estimated 3 million probable species of insects.

Systematics

Systematics is a term coined by a Swedish naturalist Linnaeus (Systema Naturae 1735) which is a Latinized Greek word Systema, as applied to the systems of classification. According to Simpson, “Systematics is the scientific study of the kinds and diversity of organisms and any or all relationships among them.” It includes Taxonomy, identification, classification and nomenclature. Now-a-days, both terms are used inter-changeably in the fields of plant and animal classification.

Arthropods occur up to the height of over 6,080 meters on land and up to the depth of about 59,728 meters in water. Different arthropod species are adapted for living in air, on land, in soil and in fresh, brackish or salt water.

Many insects are economically important for being pests of crops, stored grains, stored food, household goods and clothing etc. Some insects and arachnids are in one way or the other responsible for certain diseases of crops, domestic animals and human beings. Some arthropods, on the other hand, such as crabs, lobsters, prawns and shrimps form a part of human diet while, small sized crustaceans are staple food for fishes. Many parts of the world have witnessed some insects and spiders eaten by many land animals including man.

Insects share many characters with other arthropods, but the other arthropods have not been able to exploit these to the extent insects have evolved. The presence of functional wings is a very important character which insects do not share with other arthropods, that is why insects have distinct advantage over other arthropods in their struggle for existence and dominance. A comparative account of Insecta and other arthropod classes is given in Table 1.

Origin of systematics is as old as Vedas (1500 BC), Ramayana (1900 BC), Mahabharat (1400 BC) and Upanisad (350 BC) in which mention had been made about various animals.

History of Insect Classification

Linnaeus (1758-1766) in the 12th edition of Systema Naturae, divided insects into 9 orders

1. Coleoptera (earwigs – Dermeptera).

2. Orthoptera.

3. Hemiptera.

4. Lepidoptera.

5. Neuroptera (ant lion, Sialis, termites and dragon flies).

6. Hymenoptera

7. Diptera.

8. Thysanoptera.

9. Aptera (wingless insects, spiders, scorpions, terrestrial crustacians and Myriapods).

Classification involves grouping organisms into a series of hierarchical categories. Actual method of establishing a classification consists in defining groups or categories on a hierarchical scale. The animals can be classified in a taxonomic hierarchy consisting of a series of categories of ascending ranks from species to kingdom. Each of these categories includes one or more groups from the next lower level. Therefore, all animals can be classified in a taxonomic hierarchy consisting a series of categories in ascending order from species to kingdom such as species, genus, family, order, class, phylum and kingdom.

According to the history of biological classification, Aristotle, a Greek philosopher classified different animals based on the habitat, characteristics etc. Later Swedish botanist Carolus Linnaeus introduced taxonomic hierarchy categories during 18th century and this system is followed globally.

Taxonomic hierarchy refers to the sequence of categories in increasing or decreasing order. Kingdom is the highest rank and species is the lowest rank in hierarchy. Taxonomic hierarchy is the process of arranging various organisms into successive levels of biological classification. Each of the level of the hierarchy is called taxonomic category or rank.

Palaeontology is the science that deals with the life past geological periods. It is just the opposite of neontology which deals with the systematics of recent organisms. Fossils are the remains or parts of animal or plants that lived thousands of years ago which have turned into rock. They are preserved traces of living organisms in the earth crust.

Fossil History of Insects

Occurrence of insects in fossilised state provides a clear idea of the main order of insects. The oldest known insects’ fossil appears to be of Apterygota and blattids seem to be the oldest living insects, which have almost lived without undergoing large scale evolutionary changes from the Carboniferous to the present day.

Some of the earliest apterygotes might have developed from the Permian or lower Carboniferous. The richest collection of fossil insects is from the vegetable deposits like coal, lignite peats and in amber entangled in the raisin. Most of the insects are known only through their wings, resulting in the study of venation. However, the amber fossil of Miocene presents a clearer picture. The best known epoch is undoubtedly the Permian while Triassic provides richest discoveries of the insect fossils.

Hybridisation

Hybridisation occurs when two species cross to form a new species. If they are named before their hybrid nature has become apparent, the names would become invalid as soon as the hybridity of the specimen has been established.

Hybridism can be of three types:

1. Sympatric Hybridisation

When individuals in two regions overlap in an otherwise well-defined species, they are called sympatric hybridisation. This is common in bird of paradise and humming birds. This hybridisation is listed as cross of two parental species.

Previous Year Questions

1. CS 2015: Discuss the impact of rapid increase in population on food and agriculture (12.5 marks)

What is Food security?

The Food and Agricultural Organization (FAO) – “when all people at all times have physical and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life”.

It has Following Dimensions

• Availability: It means food production within the country, food imports and the stock stored in government granaries.

Previous Year Questions

1. Discuss the reasons for food grain surplus (7.5 marks, CSE 2019)

2. What are the reasons for good grain surplus in India? Write the steps taken by the government to save the food grains. (12.5M, CSE 2015)

Reason for Grain Surplus

Green Revolution

• Introduction of high yielding varieties of Rice and Wheat

• Green Revolution was made possible through the use of

Previous Year Questions

1. No questions were asked in past 10 years

Availability of Foodgrains

• Net availability of foodgrains = Gross Production (-) seed, feed & wastage, (-) exports imports (+/-) change in stocks.

Rabies is an ancient, dreadful disease known to mankind from the vedic ages. It is a zoonotic disease caused by Rabies virus, genus Lyssavirus family Rhabdoviridae, affecting all mammals including man. The WHO categorizes rabies as a neglected zoonotic disease that causes around 59,000 human deaths globally annually after onset of symptoms. It is a vaccine preventable disease reported from over 150 countries and territories barring the island nations like Australia, Brunei, Japan, Maldives, New Zealand, Papua New Guinea, Singapore, Timor Leste and the Pacific Island Countries. The Indian islands of Andaman Nicobar and Lakshadweep are rabies free so far.

On the other hand, Africa and Asia has the highest burden of human rabies including South-East Asia: Bangladesh, Bhutan, DPRK, India, Indonesia, Myanmar, Nepal, Sri Lanka, and Thailand. The Asia Pacific region having 60% of the world’s population includes the world’s most populous countries – India and China. Asia alone shares almost half of the global rabies deaths annually.

Veterinary Nuclear Medicine (VNM)

Veterinary Nuclear Medicine (VNM) is a specialized field that uses radioisotopes to detect, diagnose, and treat diseases. Gamma scintigraphy involves injecting radioactive tracer pharmaceuticals into the animal’s body and imaging them as they move through the body using a gamma radiation-sensitive camera. This technique provides a 2D or 3D image of the whole body or a specific organ, allowing for the estimation of the quantitative distribution within the region of interest (ROI). Advancements in gamma scintigraphy have allowed for the acquisition of information about both static and dynamic high-resolution images, such as heart wall motion, blood flow, and myocardial perfusion. Unlike other diagnostic modalities viz X-rays, ultrasonography, and CT; gamma scintigraphy offers functional information of specific organs. The most commonly used gamma radiation-emitting isotope is 99m-Technetium (99mTc), which emits a gamma energy of 98% 140-keV photon with only 10% internal conversion. Other radionuclides used in veterinary nuclear medicine facilities include iodine (123I and 131I), Gallium (67Ga), and Thallium (201Ti).

Anaplasmosis

Anaplasmosis is an infectious disease of animals caused by a rickettsia and characterized by icterus, enlargement of spleen, pale tissues, thin watery blood and petechiae over serous membranes (Fig.4.1).

Etiology

• Anaplasma centrate

• A. marginale

• A. ovis

Pathogenesis

The disease is transmitted through bite of tick (Boophilus), biting flies (Tabanus) and also in some cases due to mosquitoes. It is intra cellular organism and multiplies inside the erythrocytes by binary fission. The infected erythrocytes are engulfed by the cells of reticuloendothelial system (spleen, bone marrow). The process of erythrophagocytosis cause extra vascular haemolysis leading to anemia. It also causes autoimmune reaction leading to lysis of erythrocytes.

The land is one of the basic natural resources for agricultural growth and development of a country. Investment on agricultural land improvement by way of land leveling, contour bunding, sinking of well for irrigation and resorting to other measures like treating the soil to reduce acidity etc. have been continuous effort of agriculturists for increasing productivity.In addition, new variety of seeds which are high yielding and pest resistant are sought after by farmers for increasing production. Efficient land management encompassing soil and water conservation is the building block for sustainable agricultural development.

Land tenure rules define the ways in which property rights to land are allocated, transferred, used, or managed in a particular society. Ownership of land plays a significant role for improvement of land and its management. If the land is tenanted,the tiller of the land has less stake on long term measures on land.For centuries, the land tenure system in India was based on intermediaries known as Zamindary system.In Odisha, the tenurial system has based on the Bengal Rents Act, the Bengal Tenancy Act, the Bihar & Orissa Tenancy Act and finally, the Orissa Tenancy Act.In addition, theCentral Province Tenancy Act and the Central Province Land Revenue Act were in vogue in the Sambalpur district when the Orissa province was formed. Further, theGanjam district was under the Madras Estates Land Act(MELA). All these laws defined and classified the tenurial system.If one examines the OT Act one would find series of intermediaries between the proprietor and actual tiller of land.Tenure-holders had under-tenure holders. Raiyats had under-Raiyats. Tenants also inducted sub-tenants.

16.1. Introduction

Game theory is a mathematical framework designed for understanding and analyzing strategic interactions among rational decision-makers. It has applications in various fields such as economics, political science, psychology, biology, and computer science. The foundational premise of game theory is that the outcome of a decision made by one agent depends on the decisions made by others. This chapter provides a comprehensive overview of game theory, covering its fundamental concepts, types of games, solution concepts, and applications.

16.2. Fundamental Concepts

16.2.1. Players

In game theory, a player is any individual or entity that makes decisions within the context of the game. Players are assumed to be rational, meaning they aim to maximize their own utility or payoff based on their preferences and the information available to them.

17.1. Introduction

Grounded Theory (GT) is a systematic methodology in the social sciences that involves the construction of theories through methodical gathering and analysis of data. Developed by Barney Glaser and Anselm Strauss in 1967, GT is widely used in qualitative research to generate theories that are grounded in empirical data. Unlike traditional research methods that test hypotheses, GT allows theories are to emerge from the data itself, making it a valuable tool for exploring complex social phenomena.

This chapter provides an in-depth exploration of Grounded Theory, including its origins, key principles, methodologies, applications, and criticisms. By the end of this article, readers will have a thorough understanding of GT and its significance in qualitative research.

Donkeys can also be termed as ass (Equus africanus asinus) and is a domesticated member of the horse family, Equidae with chromosome number 62. The Wild ass of Africa, E. africanus is the wild ancestor of the donkey. For approximately 5000-7000 years, the donkey has been used as a working animal.

An adult male donkey is a jack or jackass, an adult female is a jenny or jennet, and an immature donkey of either sex is a foal. Jacks are often mated with female horses (mares) to produce mules, the less common hybrid of a male horse (stallion) and jenny is called hinny. NBAGR-ICAR has registered three breeds of donkey till date.

1. Kachchhi

• These donkeys are found in Kachchh district of Gujarat.

• Coat colour is mainly grey (dorsal surface grey and ventral surface white) followed by white, brown and black.

• Forehead is convex. Nasal bone is straight.

• Height at wither ranges from 77 to 115 cm.

• Docile in temperament.

• Only donkeys are used for agricultural purposes like inter cultivation for weed removing.

• Also utilized for transportation as donkey cart, as pack animal during pastoralist migration, etc.

The yak is a bovine species that provides livelihoods for people in high altitude conditions of extreme harshness and deprivation. Yaks live predominantly on the “roof of the world”, as the Qinghai-Tibetan Plateau is often called, and provide milk, meat, hair and down fibre, hides, draught power and dung (principally used as fuel). The yak has physical and physiological characteristics that allow it to thrive at high altitudes (low oxygen) and in extreme cold (at temperatures as low as -40 °C) and to survive feed shortages in the winter (FAO).

The milk yield of the yak cow is often no more than the amount suckled by the calf and is not comparable to the milk yield of dairy cattle. However, although milk offtake for human consumption may be at the expense of the calf, yak milk is important for households. In economic terms, milk is often the most important yak product. Yak milk is generally produced by small-scale farmers in traditional systems where management is highly influenced by climate and seasons. Lactation is seasonal and yak cows produce between 150 and 500 litres; yields vary by breed and location. Lactation can generally continue into a second year without another calving. During the winter, yak cows do not go dry and continue to produce a small amount of milk, with milk yields as low as 2 to 4 litres/month. During the second year of lactation, milk yields are between half and two-thirds of those in the first year. Currently, there are no specialized dairy yak breeds (FAO).

Some have described Mithun as domesticated Gaur others as a hybrid descent from the crossing of gaur bulls and common cows. Considered to have originated along the Assam and Myanmar border. • Mithun, also known as ‘Cattle of Mountain” is an important bovine species of north-eastern hill region of India and also of China, Myanmar, Bhutan and Bangladesh. This magnificent massive bovine is presently reared under free-range condition in the hill forests at an altitude of 1000 to 3000 m above mean sea level.

• Mithun plays an important role in the socio-economic and cultural life of the local tribal population.

• Presently, this animal is mainly reared for meat, which is considered to be more tender and superior over the meat of any other species.

• Mithun milk, though produced less in quantity, is of high quality and can be used for preparation of various milk products.

• Leather obtained from this species has been found to be superior to cattle.

India produces around 33 mt. of fruits and 50 mt. of vegetables annually (Chadha and Bhargava, 1997). It is estimated that 10 to 15 percent of total produce is available as organic waste for recycling in agriculture (Nand et al., 1996). In addition to processing of fruits and vegetables results in production of around 5 mt. of solid wastes (Table 66). Most of these wastes contain organic and plant nutrients (Table 66). There are still large amounts of wastes that are not being completely utilized. In most cases, these wastes are pro-duced from isolated sources and not by large centralized.companies. In practically all cases, horticultural and vegetable products are processed in relatively small canning plants and distributed for use generally in the same geographical area where the produce is grown, this is true world over since fruit and veg-etable wastes cannot be usually transported long distances in view of their bulk, high moisture and low to moderate feeding value relative to conventional feed.

There are about 3000 tanneries processing 6000 tonnes of hides and skin annually in India. Large amounts of solid and liquids are generated in tanneries containing N and heavy metals. The treatment of tannery waste waters generates sludge which contain a large variety of organic and mineral components. The amount of sludge from a single tannery may be obtained up to 10,000 tonnes/ Yr. Fresh Sludges undergo preliminary fermentation on liquid separating plots which are stored in piles where further decomposition takes place. As a result of decomposition process, partially biodegraded material resembling compost is obtained. It looks like deep black earthy material. The chemical composition indicates the possibility of using it in agriculture. The hides of infected animals many contain anthrax germs and be contaminated with heavy metals particularly chromium in the sludge which depends on the technology for hide tanning and the methods used in a sewage treatment plants. The sludge from tanneries using chromium in the treatment process are not suitable to be used as fertilizer as they contain high amount of chromium. Co-composting of these wastes with crop residues could provide good quality compost and the heavy metal content would get diluted and reduced per unit weight.

Concept: Seed blending is the process of merging two or more types of the same species, for as Kentucky bluegrass cultivars Merion, Baron, and Park. Contrarily, seed mixing refers to the blending of two or more species, however every species may have more than one variation represented, such as Jamestown and Cascade chewing fescue combined with Merion and Fylking Kentucky bluegrass. Seed is typically distributed in blends, primarily Kentucky bluegrass blends, for sod growing purposes. For home lawns, parks, and other utility areas where upkeep levels would not be adequate to maintain pure Kentucky bluegrass turf, mixes of different grasses are typically employed. Naturally, when it comes to pure seed quality, no blend of grass seeds is superior to the individual ingredients. Every time a new blend needs to be made; extreme caution must be taken to ensure that the mixing equipment can be completely cleaned to prevent any contamination from unwanted species—bent grasses are perhaps the most challenging to deal with.

Objective

After performing this experiment, you will be able to learn:

Water vapour transmission rate of packaging material

Introduction

Moisture Vapor Transmission Rate (MVTR), also known as Water Vapor Transmission Rate (WVTR), measures the rate at which water vapor passes through a material. MVTR is crucial in various industries where moisture control is vital. For example, moisture-sensitive foods and pharmaceuticals are packaged using materials with controlled MVTR to ensure quality, safety, and shelf life. In the textile industry, MVTR serves as a measure of breathability, enhancing comfort for outdoor clothing. In the building materials industry, managing moisture barrier properties in architectural components helps maintain appropriate moisture levels in the internal spaces of buildings. Various techniques are used to measure MVTR, ranging from gravimetric methods that assess moisture gain or loss by mass to advanced instrumental techniques capable of measuring extremely low transmission rates. It's important to note that special care must be taken when measuring porous substances like fabrics, as some techniques may not be suitable.

Objective

After performing this experiment, you will be able to learn

Sorting of samples by sink-floatation technique.

Introduction

Sink float is the simplest and cheapest method among all the wet sorting techniques in which polymers are separated based on their density. This technique is extremely fast, environment friendly and cost effective process for sorting of plastics. Since, the separations are done based on density, so any factor which may change the density of the pure polymer like blending, composite formation of multilayer structures etc. will not be separated well using this method. Moreover, if any two polymers are very close in density, they cannot be separated easily. That is why PVC and PET which are very close in their density can not be separated using sink floatation method.

Initially the plastic waste is added to the container containing water and the system is gently stirred to evenly wet the surface of plastic and remove any air trapped on the surface. Since the density of polyolefins is near/close to each other but lighter than water, they all float in water whereas the heavier plastics sink. This technique is primarily used to separate polyolefins from other plastics. Now to further segregate the polyolefinic fraction, this method is extended by adding the polyolefin mixture to another container containing water and alcohol. As dropwise more and more alcohol are added to the water, the density of the medium will decrease and the polyolefins start separating. For separating the heavier fraction of the polymer, the mixture of polymers is added to water. To this water, dropwise salt water is added and stirred. Salt water increases the density of the medium slowly and at one point, the polymers which were sinking in water, will start floating depending on their density.

Objective
After performing this experiment, you will be able to learn
Sorting of given samples by selective dissolution technique.
Introduction
Sorting process is the process of separating the mingled and mixed plastic before the recycling process. 

Selective Dissolution Technique (SDP)

Recycling of plastic has become the major focus nowadays. Sorting of plastic materials is the major step towards recycling. One of the sorting techniques is selective dissolution although it has not found major usage in industry for various drawbacks. This technique uses the solubility parameter of different polymers for segregation purpose. Each polymer owing to its chemical structure has different solubility parameters. Hence, the solvents for each and every polymer are different. This difference in solubility in different solvents is used here for separating them from one another.

Recycling of plastic has become the major focus nowadays. Sorting of plastic materials is the major step towards recycling. One of the sorting techniques is selective dissolution although it has not found major usage in industry for various drawbacks. This technique uses the solubility parameter of different polymers for segregation purpose. Each polymer owing to its chemical structure has different solubility parameters. Hence, the solvents for each and every polymer are different. This difference in solubility in different solvents is used here for separating them from one another.

Objective

After performing this experiment you will be able to learn:

The stress-strain curve of the polymeric sample (polystyrene) and calculate the tensile strength, % elongation before break, young’s modulus.

Principle

Tensile Test (ASTM D638)

Tensile strength is a measurement of ability of plastic material to withstand forces that tend to pull it apart. It is the amount of stress at the break point.

This test also helps to determine the extent the material stretches before breaking known as elongation at break. Percentage elongation is defined as the amount of linear deformation of the sample before breakage. It is measured as strain value at the break point.

Yield Point: It is the point at which an increase in strain occurs on stress-strain curve without the increase in stress. (point C)

Yield Strength: The stress at which a specified limiting deviation from the proportionality of stress-strain curve is observed for a material is known as Yeild strength.

Objective
After performing this experiment you will be able to learn:
To determine the tensile properties of polymeric sample.
Principle

ASTM D638 covers the tensile properties of both reinforced and unreinforced plastics in the form of dumbbell-shaped molded plastic test specimens.

Yield strength is measured as the highest stress where a film, when deformed, will resume its original dimensions when the force is removed. The yield stress is expressed as force per unit area (engineering stress) and is calculated as per Equation (1) and the elongation at yield as per equation (2).

Objective

After performing this experiment you will be able to learn:

To determine the tear resistance of polymeric film.

Introduction

Tear resistance testing is often used in the plastic film, paper and textile industries. Tear resistance is measured as a sample's ability to resist tearing. Tear strength is the maximum london the sample divided by the thickness of the material. Typically used for testing of plastic film, plastic sheets and other rubber products. Tear strength is calculated by force (in Newtons) divided by thickness (in millimeters, centimeters, inches, etc.): Tear strength = F/t

A tear is generally uneven and usually unplanned. In cases like a packaged chips, already tear cuts are made following a perforated line so that the effort of tearing is less and the action will most likely produce a straight line.

The speed at which a tear resistance test is conducted can affect the test significantly. Tear transmission resistance is common for acceptance testing with materials such as paper and rubber. Tear resistance in textiles involves the load required to spread a single "rip-tongue" type of tear or the type of tear where the material is initially cut.

Objective
After performing this experiment you will be able to learn:
The impact properties of polymeric film.

Introduction

Dart impact test is performed on plastic films and laminates to determine the effect of free falling dart on plastic films. The energy created by the falling dart causes the film to fail under some specified conditions. The test is widely performed by the manufacturers in plastic industries and paper & packaging industries to assess the durability and strength of the plastic films and other related products.

Dart impact strength is dependent on film thickness as the test is sensitive to orientation of the chains in the film. The tackiness of the film (slip additives) and the condition of the dart surface also influence the values determined by this test. As dart impact is not tested in any specific film direction, it is sensitive to chain orientation in both directions. Best impact strength are usually obtained when the orientation is balanced in the Machine Direction and Cross Direction.

Principle

The test method is according to ASTM D1709

Objective
After performing this experiment you will be able to learn:
The procedure to analysethe Compatibility of Food Packaging Materials Using Shelf- Life.

Introduction

When testing a food product for shelf-life and stability, the packaging is a major factor to be considered. It is necessary to carry out stability testing in the packaging intended for marketing due to interactions that may occur between the package, the product and the environment. Testing is also important for establishing the correct specifications for procurement and quality control of incoming materials.

The standards of packaging materials play a significant role in establishing optimum packaging specification. Properties of packaging materials like plastic and paper are affected by variables like temperature and humidity. Sensitivity of the packaging material to heat, light and moisture is due to their chemical nature. Compatibility of the packaging is as significant as development of the packaging systems or selecting packaging materials for food products.

Objective
After performing this experiment you will be able to learn:
The water absorption of packaging material by Cobb method.
Introduction

The water absorptive capacity, or Cobb value, is defined as the mass of water absorbed in a specific time by 1 square meter of paper, board, or corrugated f iberboard under a head of 1 cm of water. To determine this value, conditioned test pieces are weighed before and after being exposed to water under specified conditions. The excess water is removed using blotting paper and a brass roller of defined dimensions and weight. The test piece is weighed immediately before and after exposure to water for a specified duration on one surface. The increase in mass due to water absorption is expressed in grams per square meter (g/m²).

The Cobb value defines the water absorbency of paper as the amount of water absorbed by one side of a unit area of paper or board placed horizontally under a 1 cm water head within a given time.

Principle

This method, developed by Cobb, measures the amount of water absorbed by paper, paperboard, or corrugated fiberboard over a specified period under standardized conditions. It is applicable to paper or board that is not fully penetrated by water during the selected absorption time.

Objective
After performing this experiment you will be able to learn:
Gas / Vacuum packaging of foods and study their shelf life studies.

Introduction

Vacuum packaging is a food preservation technique that removes air from the package before sealing. This method involves manually or automatically placing items in a plastic film package, extracting the air, and sealing the package. The primary goal of vacuum packaging is to remove oxygen from the container to extend the shelf life of foods and, in the case of flexible packages, to reduce the volume of the contents and package. Shrink films are sometimes used to create a tight fit around the contents. Vacuum packaging is commonly used to store dry foods like cereals, nuts, cured meats, cheese, and coffee for extended periods. For short-term storage, vacuum packaging can also be used for fresh foods, such as vegetables and liquids, as it inhibits bacterial growth.

Objective
After performing this experiment you will be able to:
Perform the cut out test for the given sample of food product.
Principle

The cut-out test is conducted to evaluate the overall quality of canned food. This test involves examining the condition of the food contents, the external and internal state of the can, and other characteristics of the product through various organoleptic, physical, and chemical assessments.

Materials and Equipment

1. Canned food: 4?6 nos. Cans

2. Tone tester

3. Physical balance

4. Vacuum gauge

5. Can opener

6. Brix refractometer

7. Scale

8. pH paper near neutral ranges.

Objective
After performing this experiment you will be able to learn:
The effect of can close temperature on the resultant vacuum produced.
Principle

The unfilled volume of the hermetic (air-tight) food container usually referred to as the headspace, is a most important part of the container –contents system. In the majority of canned foods, the headspace consists of air and water vapor. Whereas a canned food would keep for a long time i.e. minimum two years of shelf life, stable, only if a certain degree of vacuum is created inside the can. The degree to which air has been extracted from a hermetic food container is measured by the pressure inside, which is referred to as vacuum. A vacuum of -101 kPa would mean that all of the gas has been expelled from the container; a vacuum of zero would mean that the pressure in the headspace is equal to atmospheric pressure. The difference between the pressure within the container and the air pressure is measured by a vacuum gauge.

Objective
After performing this experiment you will be able to learn:
Thermal Shock Resistance in Glass.

Principle

Thermal shock occurs when different parts of an object expand at different rates due to a thermal gradient. This differential expansion creates stress or strain within the material. If this stress exceeds the material's strength, it can lead to the formation of cracks. If these cracks are not stopped from propagating, they can cause the material to fail structurally. Thermal shock is quantified by the temperature difference between the heated temperature T1 and the cold water bath temperature T2 to which the object is subsequently exposed, which can reveal any cracks or damage.

Purpose of Thermal Shock Test

Glass items often experience significant temperature changes during normal use, and the thermal shock test is designed to ensure their resistance to such conditions. For example, moving a casserole dish from a hot oven to a cool countertop might be enough to cause it to break. This test evaluates the quality, durability, and strength of glass packaging materials used for both solid and liquid food products.

Objective
After performing this experiment you will be able to learn:
Mildew resistance packaging material.

Introduction

Studying the mildew resistance of paper involves evaluating how well the paper can resist fungal growth under specific conditions. Mildew, a type of mold, can degrade paper quality, causing discoloration, weakening, and unpleasant odors. Here’s a detailed procedure to assess the mildew resistance of paper:

Materials Needed

Paper samples (different types, if comparison is required), Sterile petri dishes, Sterile distilled water

Fungal spore suspension (commonly Aspergillus niger or similar mildew spores), Nutrient medium (e.g., potato dextrose agar or a similar agar that promotes fungal growth), Incubator, Sterile tweezers and scissors, Forceps, Micropipette or dropper, Humidity chamber (can be a sealed container with a saturated salt solution to maintain high humidity), Control samples (untreated paper).

In general, an unwell entity is one that fails to regularly create a surplus and frequently relies on outside funds to exist. The Sick Industrial Enterprises (Special Provision) Act 1985 characterized sickness as “a financial loss over two successive accounting periods and a total loss that is equal to or exceeds the net assets of the enterprise at the conclusion of the second accounting period”.

Revised Definition of Sick Smallscale Industry “A small scale industrial unit is deemed sick if it has incurred losses at the conclusion of the accounting year that are equal to or exceed 50% of the highest level of its net assets in the immediately preceding five f inancial years”.

Symptoms of Sickness

The continuation of many signals for a long time is called a symptom of a disease, and the various symptoms are ultimately reflected in the operation of the facility (capacity utilization rate, financial capital ratio, stock market value practice in various financial areas, production, marketing and labor relations in the industry).

Among the key signs are

• Deterioration of financial relations

• Review delay

• Lack of constant cash flow

• Continued decline in stock prices

• late payment obligations

This chapter deals with an in-depth description of the methods and procedures employed in conducting the research in an organized manner. The research methodology gives the study’s work plan. The research objectives and theoretical base offer an initial framework for identifying the appropriate methodology to answer the research questions.

The procedures followed were described under the following headings.

5.1 Research design

5.2 Locale of the study

5.3 Content analysis of websites

5.4 Statistical tools used for the analysis of data.

5.5 Preparation of report

The quality and effectiveness of extension services are critical to the agricultural sector’s long-term viability and output. Farmers have been getting agricultural information from extension workers via interpersonal communication for many years. Still, the number of extension employees has been declining while the number of farming families has increased. As a result, the country’s current extension service needs to improve in reaching out to farmers with timely and relevant agricultural information. ICTs are considered a partial answer to quickly getting information to the growing number of farming households because relevant and timely information is vital in agriculture. Farmers may receive up-to-date knowledge and information on agricultural technologies, best practices, markets, price patterns, and customer preferences through its use.

Since farmers in many parts of India, including West Bengal , are becoming more mobile and internet savvy, disseminating useful real-time information about crops, soils, climate, cultivation practices, financing, produce storage, and marketing to farming communities is more important and challenging. Many concerted efforts from the government, non-government organizations, and industry are now required to make our farmers ICT -friendly so that the benefits of rapidly evolving technological advancements in farm production, storage, and marketing can be shared equally among all communities and sectors of farming.

Objective: To understand the taxonomic characters and classification of the order Coleoptera, which includes beetles and weevils.

Order: Coleoptera (Coleos = sheath, Pteron = wing) Beetles and Weevils

Taxonomic Characteristics

1. Two pairs of wings, with the forewings thickened and hardened, forming protective covers called elytra, while the hind wings are membranous and protected by the elytra.

2. Both larvae and adults possess biting and chewing mouthparts.

3. Metamorphosis is complete.

4. Beetle larvae are commonly known as grubs. Snout beetle (weevil) grubs are legless (apodous).

Objective: To comprehend the fundamental taxonomic characteristics of the order Hymenoptera and its agriculturally significant families.

The order Hymenoptera displays remarkable diversity in its insect inhabitants. The term “Hymenoptera” originates from “Hymen” meaning membrane or the God of marriage, and “ptera” meaning wings.

Taxonomic Characters

1. Hymenopterans possess mandibulate mouthparts, where the labium and maxilla’s basal sections lie closely side by side, forming a sharp transverse fold near the basal third. In bees, these structures integrate to form a lapping tongue, representing a chewing and lapping type of mouthpart.

2. The thorax is specialized for efficient flight, featuring a collar-like pronotum, an enlarged mesothorax, and a small metathorax. The prothorax and metathorax are fused with the mesothorax.

Goods and services are created through process of production. After production they have to be transferred or moved from the original producers to the final consumers. This involves the creation of market and the undertaking of number of activities such as buying, assembling, transportation warehousing, risk bearing, financing, selling etc. This constitutes the subject matter of marketing. Hence there is the need for the study of market.

What is market?

Market is derived from the Latin word “Marcatus” meaning trade, merchandise, ware, traffic or place of business. In the ordinary language, market is a place where buyers and sellers meet personally and make their purchases or sales. But in the language of economics, market need not be a place but it may be an area or region meant for potential exchange between a group of buyers and sellers interested in negotiating the terms of purchase and sale of goods and services and such negotiations may be done face to face at a certain place or may be done through other means of communication such as mail, phone, cable, television or through business middle men. Whatever may be the means of communication there will be free exchange or perfect communication between buyers and sellers so that a fairly uniform price prevails for a particular commodity over the whole area at any given time.

Price determination under perfect competition - It can be called as a market structure characterized by a complete absence of competition or rivalry among the individual firms. The sellers and buyers cannot determine the price, only the Industry decides the price of the goods. It means the forces of supply and demand determine the price of the goods

Perfect competition is defined as a market situation where there are a large number of sellers of a homogeneous product. An individual firm supplies a very small portion of the total output and is not powerful enough to exert an influence on the market price. A single buyer, however large, is not in a position to influence the market price.

Demand under perfect competition

Demand refers to the quantity of a product that consumers are willing to purchase at a particular price, while other factors remain constant. A consumer demands more quantity at lower price and less quantity at higher price. Therefore, the demand varies at different prices. Market demand means the sum of the quantity demanded by individual buyers at different prices.

Marketing of perishable and non perishable products

Agriculture and livestock products like food grains, vegetables, meat, eggs etc. are highly perishable over time. Under ambient conditions they get spoiled with in a few hours, days or months as the case may be. Livestock products particularly milk is perishable within a few hours if not preserved under refrigeration. Same is the case of meat. Eggs also get spoiled within a few days if not preserved under cold storage. Because of these reasons perishable products pose special marketing problems. Unfortunately in a country like India most of the agriculture and livestock products are produced by large number of small producers and the process of marketing is to a large extent is in the unorganised sector. Fortunately in our country a number of states like Karnataka, Tamilnadu, Maharastra, Gujarath and others, milk is marketed through cooperatives. For example in Karnataka, milk is procured by primary milk producers’ cooperative societies, transported, processed and marketed through milk unions located at district level and coordinated at state level by state milk federation that is Karnataka Milk Federation(KMF). Some states also have slightly different marketing organisation for egg marketing also. In the unorganised sector these products go through wholesalers, semi wholesalers, private vendors, retailers and ultimately reach the consumers.

Livestock farms

The veterinarians can start their own livestock farms with their vast technical knowledge; they can infuse scientific management techniques in their own farms. In the WTO (World Trade Organisation) era, GMP (Good Manufacturing Practices) and SPS (Sanitory and Phytosanitory) measures are of great importance for export of livestock commodities, as the emphasis in international trade is on quality and food safety. If veterinarians start their own scientifically managed livestock enterprise, they can exploit this opportunity. Further, practicing proven scientific management techniques will improve productivity of animals that would lead to overall quantitative and qualitative improvement of livestock sector.