eChapters

Since the last decade discussion regarding ecology is being heard. A campaign with a great planning has launched by holding seminar conferences and meets. The ecological problem became a matter of tremendous panic and anxiety. Not only in India but also in entire world this problem is being discussed through all school, colleges and universities on international scale all over world, since it became universal issue now a days. The word ecology was not known to the people 20 years ago, never the less it became familiar even among the villages today. The people in villages are making thorough study of the subject. The experts of ecology from all over the world have been surprised to learn the exhaustive study of the same done by the Indian scholars. We have instituted a separate ministry to look after the environmental problems. The activities injurious to environment are prohibited. An act is there to restrict antienvironmental deeds what made scientists all over the world to take this matter so seriously. Does it mean that the very existence of mankind has been jeopardized by it Let us see what our ancient literature say about the ecology and pollution.

Packaging is not only an integral part of product presentation but also plays a vital role in preserving food quality and extending its shelf life. In a world where food must travel vast distances from producers to consumers, often across varying climates and storage conditions, effective packaging is essential. It serves multiple functions, from protecting food against physical, chemical, and biological hazards to providing a medium for branding, regulatory compliance, and consumer convenience. This chapter explores the fundamental need for packaging in the food industry, emphasizing how packaging contributes to the safety, longevity, and accessibility of food products. By examining the protection, preservation, distribution, and sustainability aspects of packaging, this chapter highlights its significance in modern food production and distribution systems. 2.1. Protection, Preservation

Introduction

Plant paprasitic nematodes are one of the limiting factors in the production of horticultural crops in the country. The visible symptoms of nematode attack are: Reduced individual plant growth, varying degrees of chlorosis, wilting of the foliage and sometimes death of the plants.

The roots, damaged by nematodes are not efficient in the utilization of available moisture and nutrients in soil resulting in reduced functional metabolism. Nematode infested roots are easily infected by various pathogenic fungi and bacteria and aggrevate root damage. These deleterious effects on plant growth result in reduced yield and poor quality of crops as in citrus, banana, grapevine, pineapple, papaya and vegetable crops. Decline or death of highly prised ornamentals and turf is often the result of nematode infestation.

4.1 THE NURSERY
We distinguish several types of nurseries among which we have Permanent nursery and Temporal or Seasonal nursery.
4.1.1 Permanent nursery
Permanent nursery is a large nursery destined to produce large number of plants for several years or in other words, the place is used for several years even if the plantation center is far. It is also called the central or industrial nursery. For example, the Cameroon Development Corporation [CDC] with head quarter in Limbe has its central nursery in Bota – Limbe. Here oil palm seedlings are being transported from the nursery in Limbe to the Bomboko area in Idenau Subdivision and Illoani in Ndian Division. A special management practices is being carried out in this type of nursery notably:
• Access road for vehicles accessible in all seasons ;
• Forecast annual rotation of surface area and annual production of plants;
• Forecast species with permanent shelter to serve for the protection of pots;
• Anticipated area for irrigation systems;
• Construct a shade, store, office and a guard’s room;
• Forecast methods of plant preservation for plants destined to be transported to far stations.

We, the participants of ITAF2023 visited The ocean farm under the guidance of Asst.Prof.Dr.Naphat Panthukumbol and Dr.Somrat Taweedet on 17/10/23 at 3:00 pm. The farm is certified by fisheries department and is located in Chonburi Province. The purpose of visit was to learn about the nursery rearing of shrimp and use of frozen artemia.

1) Nursery rearing details

The cultured species was Litopenaeus vannamei. Rearing was done from nauplii to PL15 stage. The farm is producing 2 variants named- ‘The ocean hero’ which is disease resistant and ‘The ocean speedy’ having high growth rate. They are procuring nauplii from Phuket. Then double certification from DOF and Burapha university lab is done to ensure SPF stock. The purchasing price of nauplii is 12,000 baht/ million nauplii and transportation done by plane. The culture period of shrimp is around 21 days.

To understand how population genetics came into being, and to appreciate its intellectual significance, a brief excursion into the history of biology is necessary. Darwin’s Origin of Species, published in 1859, propounded two main theses: firstly, that modern species were descended from common ancestors, and secondly that the process of natural selection was the major mechanism of evolutionary change. The first thesis quickly won acceptance in the scientific community, but the second did not. Many people found it difficult to accept that natural selection could play the explanatory role required of it by Darwin’s theory. This situation— accepting that evolution had happened but doubting Darwin’s account of what had caused it to happen—persisted well into the twentieth century (Bowler 1988).
Opposition to natural selection was understandable, for Darwin’s theory, though compelling, contained a major lacuna: an account of the mechanism of inheritance. For evolution by natural selection to occur, it is necessary that parents should tend to resemble their offspring; otherwise, fitness-enhancing traits will have no tendency to spread through a population. In the Origin, Darwin rested his argument on the observed fact that offspring do tend to resemble their parents—‘the strong principle of inheritance’—while admitting that he did not know why this was. Darwin did later attempt an explicit theory of inheritance, based on hypothetical entities called ‘gemmules’, but it turned out to have no basis in fact.
Darwin was troubled by not having a proper understanding of the inheritance mechanism, for it left him unable to rebut a powerful objection to his theory. For a population to evolve by natural selection, the members of the population must vary—if all organisms are identical, no selection can occur. So for selection to gradually modify a population over a long period of time, in the manner suggested by Darwin, a continual supply of variation is needed. Fleeming Jenkin argued that the available variation would be used up too fast (Jenkin 1867). His reasoning assumed a ‘blending’ theory of inheritance, i.e., that an offspring’s phenotypic traits are a ‘blend’ of those of its parents. (So, for example, if a short and a tall organism mate, the height of the offspring will be intermediate between the two.) Jenkin argued that given blending inheritance, a sexually reproducing population will become phenotypically homogenous in just a few generations, far shorter than the number of generations needed for natural selection to produce complex adaptations.

BE it enacted by Parliament in the Fifty-sixth Year of the Republic of India as Follows :
 
    1.    (1) This Act may be called the Patents (Amendment) Act, 2005. 
        (2) Sub-clause (ii) of clause (a), and clause (b), of section 37, sections 41,42,47,59 to 63 (both inclusive) and 74 shall come into force on such date as the Central Government may, by notification in the Official Gazette, appoint; and the remaining provisions of this Act shall be deemed to have come into force on the 1st day of January, 2005.

INTRODUCTION

1. Nematodes belong to the animal kingdom, and phylum Nematoda.
2. The body of nematodes is elongate ( thread like; nema in Greek means thread) without any segment.
3. It is cylindrical, tapering at each end especially towards the tail.
4. Most of the important parasitic genera belong to the order Tylenchida and few under Dorylaimida.

DEFINITION OF VIRUS

Viruses are very small (submicroscopic) infectious particles (virions) composed of a protein coat and a nucleic acid core. They carry genetic information encoded in their nucleic acid, which typically specifies two or more proteins. Translation of the genome (to produce proteins) or transcription and replication (to produce more nucleic acid) takes place within the host cell and uses some of the host’s biochemical “machinery”. Viruses do not capture or store free energy and are not functionally active outside their host. They are therefore parasites (and usually pathogens) but are not usually regarded as genuine microorganisms.

Mathwas (1981) considers a virus as a set of one or more template molecules normally encased in a protective coat or coats of protein or lipoprotein, which is able to organize its own replication only within suitable host cells where its production is:

1. Dependent on hosts protein synthesizing machinery (ribosomes).
2. Organised from pools of required material rather than binary fission and
3. Located at sites which are not separated from the host cell contents by a lipoprotein bilayer membrane.

Bos (1983) defines virus as an infectious agent often causing disease, invisible with the light microscope (Sub-microscopic), small enough to pass through a bacterial filter, lacking a metabolism of its own and depending on a living host cell for multiplication. Viruses are small packages of host alien genetic information of one type. (RNA or DNA), either in one strand or in a few segment. Encapsulated together or separately and enclosed in a coat of one or more types of protein, some time with an extra coat (envelope) and some other constituents.

GENERAL CHARACTERISTICS OF FUNGI

1. Thallus

The body of the fungus is called as Thallus, which is without stem root and leaves. It maybe Plasmodial, Pseudoplasmodial , Pseudomycelial or Mycelial. A single thread like filament is called as hypha. A hypha is made up of a thin, transparent tabular wall filled or lined with a layer of protoplasm.

A group of hypha constituting the body of fungus is called as mycelium may be septate or aseptate. i.e coenocytic.

a) Coenocytic or Nonseptate or Aseptate Mycelium

When mycelium is not divided by cross walls called as Cornocytic mycelium.

Depending upon the nature of parasitism with the host plant, mycelium is either ecotophytic or endophytic.

b) Septate Mycelium

When mycelium is divided by cross walls or septa called as septate mycelium.

DEFINITION

Bacteria belong to prokaryota which encompasses organisms with a primitive type of nucleus lacking a clearly defined membrane .The bacteria are smaller than fungi and measure about 0.5 to 1.0 x 2.0 to 5.0µ.

Structure of Bacteria

1. A bacterial cell consists of a cellwall and a compound membrane enclosing protoplasm.
2. Inside the protoplasm, nucleus, vacuoles, mesosomes, polysaccharides, lipids, mitochondric granules and spores are found.
3. Externally bacterial cells may show capsules, pili, fimbrae and flagella.
4. The bacterial cell contains a characteristics cell wall.
5. The cell wall of bacteria is composed of a peptidoglycan. It is composed of acetyle-glucosamine and cetyle-muramic acid.
6. The rigid peptidoglycan layer is located between the cytoplasmic membrane and an outer multiple tract layer.
7. The latter layer is composed of lipoprotein . It is common in gram negative bacteria.
8. Many bacteria possess other intracellular membrane systems such as mesosomes and chondrioids.
9. The mesosome structure is formed by an invagination of the cytoplasmic membrane.

Fungi, nematodes, bacteria, and viruses are probably the first things that come to mind when thinking of plant pathogens. These organisms certainly do cause damage to plants of economic importance, but it may surprise you to know that parasitic flowering plants are also important pathogens.There are few seed plants, which are parasitic on living plants and are called parasitic higher plants or Phanerogamic parasites. These parasitic higher plants attack some valuable crops and trees causing considerable losses. They produce flowers and seeds and belongs to several widely separated botanical families they differ to each other on their dependency on host plants. These parasites have haustoria as absorbing organ, which sent deep into the vascular bundle of the host to draw water and nutrients. More than 2500 species of higher plants are known to live parasitically on other plants.

PHYTOPLASMA OR MYCOPLASMA

Definition

Phytoplasmas are unicellular, ultramicroscopic, walless, prokaryotic, self- replicating, highly pleomorphic, filterable organisms or entities.

Mycoplasma lack rigid cell wall, being surrounded only by single triple unit membrane which allows them to be highly plemorphic. They assume vast array of shapes and size. They require sterols (Lipoproteins) for growth. Mycoplasma cannot be grown on artificial media and they reproduce by budding and binary fissions.

VIROIDS

Defnition

Viroid is circular, encapsulated, low molecular weight (1.1-1.3x105), self replicating, highly infectious ssRNA molecules .

General Characters

1. The viroid exists in in vivo as unencapsulated RNA.
2. They never contain any protein coat (capsid).
3. Genome of the viriod naked, single stranded ( RNA) with 250-400 nucleotide, either linear or mostly circular. Viroids are smaller in size than viruses i.e 50 nm or 1.1 to 1.3 X 103 molecular weight.
4. Despite its small size, the infectious RNA is replicated autonomously in susceptible cells; that is, no helper virus is required for multiplication.
5. The infectious RNA consists of one molecular species only.
6. Viroids are notable to synthesize protein and replicase enzyme required for replication.
7. Viroids replicate by direct RNA, copying in which all components required for viroid multiplication including RNA polymerase are provided by the host.
8. They cause diseases only in plants.
9. Viroids concentration and translocation is higher in growing parts of the plants (up to 0.2 mm from the apex)
10. Most of the types of symptoms observed with viral diseases also occurs viroids like epinasty, leaf distortions, vein clearing, localized chlorotic or necrotic spots, mottling of leaves, necrosis of leaves, and death of the whole plants.

ABSTRACT

Satellite-based hyperspectral imaging became areality in November 2000 with the successful launch and operation of the Hyperion system on board the EO-1 platform. Hyperion is a push broom imager with 220 spectral bands in the 400-2500 nm wavelength range, a 30 meter pixel size and a 7.5 km swath. Prelaunch characterization of Hyperion measured low signal to noise (SNR<40:1) for the geologically significant shortwave infrared (SWIR) wavelength region (2000- 2500 nm). The impact of this low SNR on Hyperion's capacity to resolve spectral detail is studied for the Musiri and Tattayyangarpettai regions of part of Namakkal and Tiruchirapalli districts of Tamil Nadu state, India which comprises a diverse range of minerals with narrow, diagnostic absorption bands in the SWIR. Following radiative transfer correction of the Hyperion radiance at sensor data to surface radiance (apparent reflectance), diagnostic spectral signatures were clearly apparent including: green vegetation; talc; dolomite; crystalline limestone, chlorite; white mica and sericite. Though the derived surface composition maps generated from these image endmembers were noisy (both random and column), the spatially coherent and correlated well with the known geology. The interpreted and processed mineral map is given below. In addition, the Hyperion data were used to measure and map spectral shifts of <10 nm in the SWIR related to white mica chemical variations.

Abstract

Satellite photographs depict exciting evidence on the migratory melodrama of river systems. A study has been conduced in parts of Tamil Nadu using IRS-IA Satellite pictures, archaeology and Tamil literature, which reveals that from Pleistocene to 2700 years B.P.(Before Present) the river Cauvery flowed in a northeasterly direction from the Stanley reservoir via Chinnar, Palakkodu, Mattur, Tiruppathur (Tiruppattur), Gudiyatham (Gudiyattam), Vellore and Walajapet to meet the sea at Madras. From 2700 to 2300 years B.P., it flowed via Uttangarai and Tirukkovilur to meet the bay of Bengal near Pondicherry, over which the present-day Ponnaiyar is a misfit stream . From 2300 to 1300 year B.P. it has flowed via Erode, Tirukkampuliyur, Alagarai , Tiruchy, Kiranur and Pudukkottai meeting the sea in the region where the present-day Agniar and Ambuliar meet the sea. Subsequently, between 1600 and 1300 years B.P., the Cauvery flowed along the present-day tracts of the Vennar and Vettar, after which it seems to have flowed as the Kodamurutti, Arasalar and PalanCauvery from 1300 to 1000 years B.P. From about 900 years B.P. it flowed via Tirupurampayam (Tirupurambiyam), Achalpuram till around 750 years B.P. and then it is stabilised as the Colleroon (Kollidam). Such periods and phases of river migration as well as their implications in the search for archaeological remains are discussed in this paper.

3.1 Physical characteristics

There is obviously an association between the amount of rainfall and the amount of soil erosion, i.e. more rain goes with more erosion, and less rain with less erosion, but in statistical terms the correlation between the two is poor. The same total quantity of rain can on different occasions result in widely differing amounts of erosion, and so other more specific measures are required to describe the ability of rainfall to cause erosion. In this chapter we shall establish the known facts about the main physical properties of rainfall, and then in chapter 4 show how these properties are related to the erosive power of rainfall.

3.1.1 Quantity of rainfall

Any measure of rainfall amount is a sample, and so associated with the inevitable problems of sampling, namely, ⁴is the sample representative of the whole?’ and ‘is the sample measured accurately?’ On both counts the data of rainfall which are usually available are of very doubtful reliability. Considering firstly the size of the sample measured, a very intensive network of rain gauges such as that established in an experimental catchment might be as dense as one gauge per 25 hectares, but this corresponds (with a 125 mm diameter gauge) to a sample of about one in 20 million, which would for any other scientific measurement be considered totally inadequate. The density of gauges in a country which considers itself very well provided might be one gauge per 25 square kilometres - a sample of one in 2 000 million, and in an undeveloped country the density of one gauge per 2 500 square kilometres is a sample of 1 in 200 000 000 000! Secondly, the siting of this remarkably small number of gauges is usually arranged primarily on convenience, eg where they can be easily read and contained, with little or no consideration of whether the site is representative of the whole. Thirdly, the accuracy of the measurement is usually unknown and studies have shown that variations in the shape and size of the instrument, and in the height at which it is mounted, and the way it is shielded from the wind, can seriously affect the recorded amount of rainfall. Clearly, even the apparently straightforward question of how much rain falls is not answered as precisely as might be imagined from a survey of rainfall tables and maps.

X-ray photons are produced as a result of electrons hitting metal while extremely rapidly moving at high speed. This is achieved through the application of an electric current to a cathode (negative electrode) via a high voltage power source (electricity) which enables electrons to be released from the cathode into the X-ray tube. These electrons, being negatively charged, are attracted to the anode (positive electrode or target). When the electrons strike the metallic target (anode) in the tube, X-rays and heat are produced. Basically the process of producing an X-ray involves a source that produces X-rays and radiating them through a body or object, where they are absorbed at different rates until they are detected by a sensitive film or cassette. It should be mentioned at this point that most of the energy of the electrons is not converted into X-rays but is dissipated as heat. In fact 99% of the energy dissipated in the target is lost as heat, and only 1% is converted to X-ray energy.

The insect larva after the complete development emerges out from the egg by rupturing the egg shell chorion. It passes through several stages called as instars. Each instar is separated by a moult; the growth from larva to adult involves some degree of morphological changes or metamorphosis. The egg hatches into 1st instar larva which later moults to the second instar larva and so on until at a final moult the adult imago stage. The insect moult takes place after attaining adult except in the insect apterygote insect. In family pantatomide full insect moulting occurs. Many insects especially those with a small number of instars (mosquitoes) and (chrysocoris stolli) insect moulting occurs as Ist, 2nd, 3rd, 4th and 5th imago instar and then after sometime adults insect emerges.

Metamorphosis of Insect: The development process by which first instar immature stage is transformed into the adult is called metamorphosis, which means literally change in the form. The developing stage is morphologically different from the adult. The degree of difference varies from slight to extreme with many intermediates stage. E.g., Cockroaches, Butterfly, Chrysocoris stolli Wolf. The insect may be grouped on dependance of degree of metamorphosis as:

Introduction

In order to provide for the establishment of an effective system for protection of plant varieties, the rights of farmers and plant breeders and to encourage the development of new varieties of plants it has been considered necessary to recognize and protect the rights of the farmers in respect of their contribution made at any time in conserving, improving and making available plant genetic resources for the development of the new plant varieties. Moreover to accelerate agricultural development, it is necessary to protect plant breeders’ rights to stimulate investment for research and development for the development of new plant varieties.

Introduction

The search for order in the location and size of settlements continues. Certain geographers examined the size of distribution of settlements and described in graphical form the relationship between the number and size of settlements. Their methods were radically different in that they were not deterministic, rather than making a set of assumptions, deriving a theory and testing it against reality, they observed the size and number of settlements in various countries and noted a common characteristic, which was called the rank size rule. Having once observed this order in the real world, they then sought to explain it. A relationship which is observed on several occasions is called an empirical regularity. The rank size rule is one such empirical regularity.

The rank size rule was first observed by Auerbach in 1913 but was proposed and popularized by G.K. Zipf in his book “Human Behaviour and the Principle of Least Effort”. Since then, many writers have attempted to explain it but the basic aim has always remained the same: to find a graphical description to the size distribution of cities which would apply to the situation prevailing in many countries.

Rank Size Rule: Theoretical Base and Concept

Rank size rule is a theory describing numerical distribution of settlement, which recognises an empirical regularity whereby the product obtained by multiplying a city’s rank by its size is equal to a constant, the population of the country’s largest city such that for a given settlement system

The Red Data Book is a public document that is created for recording endangered and rare species of plants, animals, fungi as well as some local subspecies that are present in a particular region. It helps us in providing complete information for research, studies and also for monitoring the programs on rare and endangered species and their habitats. Many nations of the world have prepared Red Data Books for their biological resources. Some Red Data Books include both plants and animals whereas, generally the plants are dealt separately from animals. This book is mainly created to identify and protect those species which are on the verge of extinction (“Extinction is the process of evolution that leads to the disappearance of a population or species”).
Whereas red lists of threatened plants are being highly developed for wild plants and even replaced by green lists (Imboden, 1989) and blue lists (Gigon et al., 2000), ornamental plants still lack similar lists.
13.1 Brief History
The name of this book has its origins in Russia, it was originally known as the Red Data Book of the Russian Federation or the RDBRF. The book was based on research conducted between 1961 and 1964 by biologists in Russia. Hence, it is also called the Russian Red Data Book.

Mechanical damage in oil seeds like soya bean can be induced at any time during harvesting, handling, conditioning and sowing operations. There is relationship between moisture and mechanical damage. In general the low moisture containing seeds are more prone for mechanical damage than the high moisture containing seeds. In this experiment we look for this relationship by measuring seed quality parameters like germination and leakage (electrical conductivity).

A responsibly behaving organization creates a positive impact on society and its operating environment. Globally, there is a rising demand and expectation of people from organizations to act in manners that result into shared value and prosperity. This calls for bringing a major change in the current approach of organizations and their human resources.

Three frameworks could be popularly referred to when we intend to discuss responsible behaviour of an organization. These approaches have been highlighted considering practical significance and ability to fundamentally change the ground rules of organizational day to day working. This includes.

Synopsis

If the human being was born first, he or she needed food immediately to survive. Thereafter, human beings continued to need food and continued to eat food throughout his or her life. Hence, the relationship between human being and food is permanent and the requirement of food for the human being to be alive is everlasting. The paper provides the background, definition of right to food, and adequate food, historical events, legal perspectives, operational guidelines, and advances in its application and derives conclusion.

Introduction to Right to Information
The Right to Information (RTI) is a fundamental democratic principle that ensures citizens’ access to information held by public authorities. RTI empowers individuals to participate in governance, hold officials accountable, and enhance transparency. This chapter provides an in-depth exploration of RTI frameworks in India and compares them with systems in selected Western countries, highlighting legislative evolution, scope, operational mechanisms, and significant challenges faced in these systems.
Historical Background of Right to Information
Origins of RTI in Democratic Societies
The concept of RTI has roots in Enlightenment-era principles of transparency and democracy, where the belief that government decisions should be made in the public eye gained momentum. Sweden was the first nation to codify freedom of information in 1766, emphasizing that transparency is essential for a democratic society.
International Recognition of RTI
RTI gained international prominence with the Universal Declaration of Human Rights (UDHR) in 1948, wherein Article 19 affirmed the right to freedom of expression and information. In 1966, the International Covenant on Civil and Political Rights (ICCPR) further articulated this right, strengthening its recognition on the global stage.

Precision farming has revolutionized the agricultural sector by enabling farmers to optimize their operations, increase productivity, and reduce environmental impact. Central to this transformation is the incorporation of GPS technology, which has ushered in a new era of smart farming techniques. Some key advantages of precision farming equipment include:
• Enhanced accuracy in planting and harvesting.
• Reduced input costs by applying fertilizers and pesticides only where necessary.
• Improved crop yield and quality.
• Minimized environmental impact.
• Efficient resource management. As we delve deeper into the world of precision farming, let’s explore the key equipment and technologies reshaping the agricultural landscape.
GPS TECHNOLOGY: THE BACKBONE OF PRECISION AGRICULTURE
GPS technology has become an essential tool in modern farming. It serves as the foundation for numerous precision farming practices, enabling accurate positioning and navigation during various farm operations.
Below mentioned are some ways GPS technology is transforming agriculture:
• Auto-steering systems: Allow tractors and other farming vehicles to navigate fields with centimeter-level accuracy, minimizing overlap and enhancing efficiency.

A. Answer the following?

1.    Why does camel mostly eat carbohydrates during desert travel?

Ans: Because increasedrespiration needed to oxidize body fat and protein which result in an increased loss of water by evaporation whereas carbohydrates oxidation results in lower loss of water.

2.    Why birds require less water than mammals?

Ans: Because uric acid is the end product of protein metabolism and is excreted in nearly solid form with minimum loss of water. Higher evaporative loss in birds is partially balanced bytheir reducedurinarywaterexcretionrelative to mammals. Besides, the breakdown of protein to uric acid provides more metabolic water than does its catabolism to urea.

3.    What is TDS?

Ans: TDS or total dissolved solids or salinity is a measure of the usefulness of water for animals or for crop irrigation.

4.    What is metabolic water?

Ans: When prganic compounds such as fat,protein, carbohydrates are oxidized in the animal body, water us produced as end product along with other usable products. Similarly, when proein, fat and carbohydrates are synthesized liberation of water takesplace. The water which is available to the animal body by such biochemical reaction is known as metabolic water.

5.    What is bound water?

Abstract

Drought and salinity are two major abiotic stresses that affect various aspects of human lives of one third world population including human health and agricultural productivity. Abiotic stresses such as salinity, drought, nutrient deficiency or toxicity, and flooding limit crop productivity world-wide. A living organism is considered resistant if it tolerates a given physicochemical stress. The presence of microorganisms within the soil, specially a main group known as arbuscular mycorrhizal fungi (AMF), is a key factor in the adaptation of plants to the different ecosystems. The AMF colonizing within the plant roots can determine the success of plants in salt- and/or drought-affected areas. The symbiosis with AMF has been proposed as one of the mechanisms of salinity and water stress avoidance. Studies have shown greater drought and salinity tolerance in AMF-colonized plants by a number of mechanisms. These mechanisms include enhanced water and nutrient uptake directly by extraradical hyphae, higher leaf stomatal conductance and/or better root system architecture, higher capacity of osmotic adjustment and antioxidant defense systems, better soil structure due to higher glomalin and over expression of genes encoding antioxidant enzymes.

Introduction to AI in Toxicology

Toxicology is the scientific study of the adverse effects of chemical, physical, or biological agents on living organisms and the environment. It explores the mechanisms of toxicity, prevention, and mitigation, while applying this knowledge to safety evaluation and risk assessment of xenobiotics. It encompasses various sub-disciplines like chemical, organ-specific, genetic, environmental, and clinical toxicology, as well as toxicokinetic and regulatory risk assessment. Traditionally, toxicological assessments involve complex experimental models, including in vitro, in vivo, and clinical studies, which are time-consuming and resource-intensive. This is where AI steps in to revolutionize the field.

Artificial Intelligence is a branch of computer science focused on developing systems capable of performing tasks that typically require human intelligence, such as learning, reasoning, and decision-making. Its subdomains—such as machine learning (ML), deep learning (DL), and natural language processing (NLP). In toxicology, AI, especially machine learning (ML), is applied to predict and evaluate chemical toxicokinetic and toxicity. ML uses algorithms to train computational models for problem-solving, and is categorized into supervised, unsupervised, and reinforcement learning methods. These AI techniques are increasingly utilized in toxicology for analyzing complex data and enhancing safety predictions. They are increasingly being used in various areas of toxicology, such as neurotoxicity, cardiovascular toxicology, nanotoxicology, toxicokinetic, dermal toxicity, and carcinogenesis. These approaches provide enhanced predictive and analytical capabilities across these diverse toxicological fields.AI methods can enhance in silico toxicology by integrating various data sources, including chemical structures, biological information, and in vitro results. This improves predictions of human toxicity, reducing the need for experimental studies, especially in vivo animal testing.

Abstract
The global biodiversity crisis emphasizes the necessity of effective conservation strategies, particularly in aquatic ecosystems that possess vast yet poorly understood biodiversity. This article explores the role of biosystematics, which combines taxonomy, evolutionary biology, and ecology, in protecting aquatic biodiversity. It emphasizes species identification, genetic diversity, and evolutionary relationships as key to targeted conservation efforts. Modern tools like DNA barcoding, eDNA, next-generation sequencing, and ecological niche modelling improve conservation precision. Despite challenges such as cryptic species and climate change, advancing technology, collaboration, and policy support are essential for protecting endangered aquatic species and maintaining ecological balance.
Keywords: Biosystematics, Taxonomic and Phylogenetic Insights, Aquatic Conservation, Evolutionary Relationships, Endangered Species

Biotechnology has emerged as a transformative force in agriculture, offering innovative solutions to enhance crop production. This article explores the extensive role of biotechnology in crop production, tracing its historical development and highlighting key technologies such as genetic engineering, marker-assisted selection, and genomics. The applications of these technologies in developing pest-resistant, herbicide-tolerant, nutritionally enhanced, and climate-resilient crops are examined. Benefits such as increased agricultural productivity, environmental sustainability, economic advantages for farmers, and improved food security are discussed. Challenges, including ethical concerns, environmental risks, socioeconomic disparities, and regulatory issues, are also addressed. The article concludes by considering future prospects for biotechnology in crop production, emphasizing the potential of advanced genetic technologies, synthetic biology, and sustainable agricultural practices.

Introduction

Chemical exposure in the workplace is a prevalent concern across various industries, including manufacturing, agriculture, healthcare, and construction. These exposures can range from acute to chronic and involve many substances, from heavy metals and solvents to pesticides and industrial chemicals. While the physical health effects of chemical exposure are well-documented, the psychological impacts are less understood but equally significant. Psychological stress is a response to perceived threats or challenges characterized by physical, emotional, and cognitive symptoms. Theories such as the Transactional Model of Stress and Coping by Lazarus and Folkman emphasize the role of individual perception and coping mechanisms in stress experiences.

The modern industrial landscape is characterized by ubiquitous chemicals, ranging from benign substances to potentially hazardous compounds. As industries strive for higher productivity and efficiency, the workforce is frequently exposed to various chemicals. This exposure is not without consequences; while the physical health effects of chemical exposure have been extensively studied, the psychological impacts are less understood. Emerging research indicates that chemical exposure can significantly contribute to psychological stress, affecting worker health, productivity, and overall well being.

Abstract
Coastal wetlands, including mangroves, salt marshes, and seagrass meadows, play a critical role in regulating the global climate by sequestering carbon. These ecosystems act as vital carbon sinks, efficiently absorbing and storing carbon in their biomass and soils. Despite covering only 2-3% of the planet’s surface, coastal wetlands are believed to store more than half of the world’s carbon in the top meter of soil, helping to mitigate climate change. The unique hydrological and biological characteristics of these ecosystems, such as their ability to slow the decomposition of organic matter and facilitate sediment burial, are crucial to their carbon storage capacity.
In addition to their role in carbon sequestration, coastal wetlands provide essential ecological services, including supporting biodiversity, preventing erosion, and protecting against storm surges. However, they face significant threats from pollution, climate change, human activity, and hydrological alterations, which could jeopardize their ability to store carbon. Preserving and restoring coastal wetlands is essential for maintaining their carbon sequestration capacity and strengthening climate resilience. Effective wetland conservation efforts, including sustainable land-use practices and restoration techniques like sediment augmentation, are essential to ensure these vital ecosystems continue to contribute to climate regulation.
Keywords: Coastal Wetlands, Climate, Carbon Sequestration, Blue carbon

Epigenetics is a new field of research in plant biology, which aims to provide a powerful tool to improve crop productivity, adaptability, and resistance to biotic and abiotic stresses. In recent years, researchers have begun to explore the potential of epigenomics in plant breeding, providing breeders with an alternative to genetic engineering, addressing concerns related to genetically modified organisms (GMOs) in agriculture. In particular, epigenetic markers (epimarkers) are chemicals which regulate genes by sitting over the DNA sequence; they explore the consequences of thermal and ionic variation on the behavior of plant under stress conditions. Moreover, epialleles may be promising sources of new variation of traits that are controlled by genes that are not detrimentally regulated. In this chapter, we provide an overview of the current state of the art in epigenomic research, focusing on the impact of next-generation sequencing (NGS) on epigenomes, as well as the potential use of epigenetics in crop breeding.

Introduction

Epigenetics is the study of heritable changes in gene expression that occur without alterations in the DNA sequence. It involves modifications of the DNA or associated proteins that can influence gene activity and expression. Most cells in an organism share the same genes, although they can be very diverse from one another. This is due to the fact that not all genes are active in all cells at the same time. The epigenetic context of a gene, or its accessibility to transcription, can tell whether the gene is likely to be active or not (Klemm et al. 2019). Indeed, the nuclear genome is found as a dense combination of long DNA strings wrapped around specialized proteins called histones to create nucleosomes (Samo et al. 2021). These nucleosomes can be further packed together to form even denser 3D formations that are sometimes visible under a microscope, giving rise to the term “chromatin”.

Introduction
Public relations (PR) is a vital element for government institutions seeking to establish strong, credible, and transparent relationships with the public. Unlike corporate PR, where goals center on branding and market influence, government PR focuses on informing citizens, fostering trust, promoting policy understanding, and maintaining transparency. As government bodies make decisions that directly impact public welfare, maintaining effective public relations becomes essential to ensuring public cooperation, mitigating crises, and building a stable, informed society. This chapter explores how government institutions leverage PR, the strategies and mechanisms they use, and how effective PR can impact the relationship between government and citizens.

The global aquaculture and fisheries industries are essential for maintaining environmental sustainability, economic growth, and food security. With these sectors confronting historically unseen obstacles, such as excessive fishing, habitat destruction, and climate change, government policy will play a bigger role in shaping their futures. A summary of the key concepts and elements influencing how government regulations impact the long-term sustainability of fishing and aquaculture industries. The union administration is committed to providing a favorable climate in collaboration with the States and UTs so that the fishing industry can realize its full potential, achieve excellence, and fulfill its obligations to farmers and customers. To achieve the policy objectives, the government will enlist the support and involvement of all relevant parties. The National Fisheries Policy 2020 provides a planned path ahead for responsible and sustainable development, exploitation, management, and regulation of capture and culture fisheries. In order to achieve the objectives of the "Blue Economy," the Policy will guarantee fruitful integration with other economic sectors, including agriculture, coastal area development, and eco-tourism. Universities are also involved in accessing resources and knowledge.

Introduction
Integrated pest management (IPM) is an ecosystem-based strategy that focuses on longterm prevention [italicsadded] of pests or their damagethrough acombination of techniques such as biological control, habitat manipulation, modification of cultural practices, and use of resistant varieties. Pesticides are used only after monitoring indicates they are needed according to established guidelines, and treatments are made with the goal of removing only the target organism. Pest control materials are selected and applied in a manner that minimizes risks to human health, beneficial and non-target organisms, and the environment
“Pest control is the process of meaning and preventing pests, such as insects, rodents and other animals, from causing damage to crops and other area.” Organic farming is a method of agricultural production that excludes the use of synthetic substances, such as pesticides, synthetic medicines or fertilizers, and genetically modified organisms.
As on 31st March 2023 total area under organic certification process (registered under National Programme for Organic Production) is 10.17 mha (2022-23).
This includes5391792.97hacultivableareaandanother4780130.56 haforwildharvest collection. Among all the states, Madhya Pradesh has covered largest area under organic certification followed by, Maharashtra, Gujarat, Rajasthan, Odisha, Karnataka, Uttarakhand, Sikkim, Chhattisgarh, Uttar Pradesh and Jharkhand. India is bestowed with lot of potential to produce all varieties of organic products due to its various agro climatic conditions.
Pest controls are the many different types like this Cultural control, Biological control, Physical and Mechanical control, Botanical control, Insecticides and other Control etc.

Introduction

A large number of institutions in the field of agriculture and allied sectors are contributing to research in development of high yielding varieties of crops, technological innovations and other initiatives to boost production and human resource development. The technology available has to be permeated depending upon the necessities of the region – its soil, climate, culture and needs and means of the farmers, available human resources, feasibility and viability of different parts of the country. It has been observed that there are variations in knowledge and technological percolation. The National Commission of Farmers (founded in 2004) raised the issue of knowledge deficit, which directly impinges on agriculture productivity. There are significant gaps in backward and forward linkages between the agricultural laboratories and the farmers, in so far as transfer of technology is concerned. The 10th and 11th plans have emphasized the need for effective extension services. The 11th Plan Approach Paper also states that “in the longer run, growth in agriculture productivity can be sustained only through a continuous technological progress”. The 11th Plan shows a concern towards the problem of transfer of technology and knowledge at grass-root level and puts forth challenges before the extension agencies. The 11th Plan points out that extension services are to be treated as a service delivery mechanism. The 12th Plan also emphasizes the need for mechanisation of agriculture with robust extension services.

Introduction

There are a growing number of academics and publishers who believe quite firmly that once the transition from print to electronic journals has been made — particularly within the scientific, medical and technical (STM) sector of the journals market — there will be no role for libraries in the scholarly communication chain. Electronic journals can be delivered directly from the publisher  to the user’s desktop. Such a scenario is certainly possible, but it is unlikely for a number of reasons.

1. INTRODUCTION

The key global challenges facing the mankind in the 21st century are food, water, energy security, environment, combating cancer, and infectious diseases. Solving these challenges requires concerted efforts using modern scientific and technological advances in multiple disciplines. One such technology that has revolutionized life science research is “next-generation sequencing”. The NGS technology has brought an enormous technological shift in DNA sequencing through dramatic high-throughput and a precipitously dropping cost of raw sequence data. NGS technologies changed the dynamics and pace of genomic research in humans, animals, plants and microbes largely due to their rapid, inexpensive and highly accurate sequencing capabilities. The capillary electrophoresis based sequencing technology pioneered by Sanger and Coulson.

1. Introduction
Omega-3 fatty acids are a vital group of polyunsaturated fatty acids (PUFAs) recognized for their complex chemical structure, which is characterized by multiple double bonds within their hydrocarbon chains. This unique arrangement not only influences their physical and biochemical properties but also underpins their essential roles in various biological processes across a wide range of organisms. Omega-3 fatty acids are categorized into three primary types: alpha-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA). While ALA is predominantly found in plant sources, such as flaxseeds, chia seeds, and walnuts, EPA and DHA are primarily sourced from marine organisms, particularly fish and algae.
1.1 Importance of Omega-3 Fatty Acids
1.1.1 Nutritional Significance in Aquatic Organisms
In fish nutrition, omega-3 fatty acids are indispensable for promoting optimal growth, development, and overall health. These essential nutrients contribute to a multitude of physiological processes, including:
1. Cellular Structure and Function: Omega-3 fatty acids are integral components of cell membranes, influencing their fluidity and permeability. This is crucial for maintaining cellular integrity and facilitating the transport of nutrients and signaling molecules across membranes.

Introduction
The eco-friendly and commercially sustainable production has been a crucial aspect of modern commercial development. The ecologically sustainable microbial production of value-added products has seen rapid growth across multiple sectors, such as food, pharmaceuticals, and energy, resulting in notable economic benefits and social advancements on a global scale (Shi et al., 2022). The development of “omics” technologies has aided the improvement of microbial production processes through diverse omics procedures, such as genomics, transcriptomics, metabolomics, and systems biology (Amer and Baidoo, 2021). These omics approaches give important understandings into the widespread metabolic variations, thereby identifying the factors that affect microbial production efficiency and improving the understanding of targeted optimization strategies. The integration of omics approaches is considered essential for any strategies that aim to be industrially sustainable. Industrial activities depend on the cultivation and accessibility of significantly competent microbial species to optimize bioproduct yields (Keasling, 2012). Recent progress in the industrial generation of value-added products heavily depends on strategies rooted in omics. Typically, the industry can achieve cost-effective production of limited quantities of biopharmaceuticals (Harris et al., 2015). Nevertheless, to sustainably scale up production capacities, economically feasible alternatives must be planned, standardised, and developed. Over the past few decades, microbes with enhanced abilities for superior product generation have been identified (Babar et al., 2018; Kim et al., 2015). Latest improvements in metabolic engineering have aided the manipulation of various genetic components, including coding and regulatory regions, to maximize commercial benefits (Babar et al., 2018). Genomic methodologies aim to investigate the variations among individuals at both the germline and somatic levels by sequencing specific genomes. The transition from DNA microarray technology to DNA sequencing has enabled the thorough sequencing of entire genomes, providing a detailed characterization of an organism’s genomic landscape (Dai and Shen, 2022) whereas, transcriptomics involves the analysis of mRNA, microRNAs, long non-coding RNAs, and circular RNAs. The methods used in transcriptomics are designed to identify and enumerate RNA molecules transcribed from a specific genome at a particular time. Proteomics on the other hand focuses on understanding the functional significance of all proteins expressed within a cell, tissue, or organism by examining the flow of information via protein signalling and metabolomics contributed a vital part in the development of bioprocesses by providing a comprehensive overview of metabolic activities (Horgan and Kenny, 2011; Petricoin et al., 2002). Synthetic biology contributes a vital part in the production of high-performance strains for microbial manufacturing. A variety of microorganisms including bacteria, fungi, and microalgae can be employed in microbial production. However, synthetic biology methods primarily emphasis on the balanced blueprint of biosynthetic metabolisms for target outcome, as well as the creation and standardisation of these pathways and the heterologous production of the biosynthetic components (Wan et al., 2023). These approaches include the optimisation of fermentation process, optimisation of medium composition, scale up of fermentation, optimization of cell growth for manufacture of desired product, and strategies to decrease feedback inhibition and product toxicity (Figure 3.1) (Wan et al., 2023; Zhang et al., 2022).

Abstract

There are two distinct types of oscillations in global oceans, separated in their frequencies by the period of the pendulum day. One species is the gravity waves and the other is the rotational waves, associated with earth’s rotation. Both these species can be found in tidal records around islands as well as near coastlines. These two types of modes are usually found in the tsunami records on tide gauges. The tide gauge records as well as visual descriptions of the water levels during and after the occurrence of a tsunami clearly show the presence of these oscillations. During the tsunami of 26th December 2004 in the Indian Ocean, media reports suggested high water levels persisted around the Andaman and Nicobar Islands for several days. These persistent high water levels can be explained by invoking the existence of trapped and partially leaky modes on the shelves surrounding these islands.

Keywords: Oscillations in global waves, Tsunami (2004), Andaman and Nicobar islands.

Remote sensing and Geographic Information Systems (GIS) have emerged as critical tools in modern agriculture and weather intelligence. Their integration has revolutionized how we monitor, analyze, and manage not only food production but also urban development, natural resource conservation, and climate adaptation. In this chapter, we explore the fundamentals of remote sensing, the use of diverse sensing technologies (including satellite imagery, radar, LiDAR, and thermal imaging), and the incorporation of advanced data analytics and machine learning. We also examine GIS integration for spatial analysis and mapping, discuss emerging technologies like unmanned aerial vehicles (UAVs) and Internet of Things (IoT) sensors, and address economic, ethical, and policy considerations. Real-world case studies illustrate the practical applications of these technologies, while discussions on future directions highlight opportunities for continued innovation. Food production systems and its management today face unprecedented challenges—from climate variability and resource scarcity to urban expansion and shifting ecosystems. To address these challenges, modern strategies increasingly depend on synthesizing high-resolution environmental data with advanced spatial analysis. Remote sensing technologies provide a bird’s-eye view of vast landscapes, while GIS platforms enable efficient management and interpretation of these datasets. The integration of these technologies supports a host of applications, including real-time monitoring of weather phenomena, predictive modeling of environmental impacts, and strategic planning for sustainable development. With emerging trends such as drone-based monitoring, IoT sensor networks, and AIdriven analytics, the potential for remote sensing and GIS to transform weather intelligence and environmental management is growing exponentially. This chapter provides both the technical foundation and applied perspectives necessary to understand and leverage these powerful tools.

Abstract
Agriculture is a critical sector that impacts global food security, economic stability, and environmental sustainability. The advancement of agriculture relies heavily on the active involvement and collaboration of various stakeholders, including farmers, government agencies, private sector players, non-governmental organizations (NGOs), and academic institutions. This chapter explores the multifaceted roles of these stakeholders in driving agricultural innovation, policy development, and sustainable practices. Through an analysis of stakeholder interactions and contributions, the chapter highlights key areas where collaboration is essential for advancing agriculture. Case studies and real-world examples are used to illustrate the impact of stakeholder engagement on agricultural outcomes. The chapter concludes by discussing the challenges and opportunities associated with stakeholder collaboration and offers recommendations for enhancing collective efforts in agriculture.
Keywords: Agriculture, stakeholders, innovation, policy development, sustainable practices, collaboration, food security, economic stability, environmental sustainability.

Governments play a pivotal role in fostering CRRD by formulating policies, mobilizing resources, and promoting sustainable practices to enhance rural resilience. Governments in CMCs are central to designing and implementing policies that integrate climate resilience into rural development. 4.1.1 Policy Frameworks for Climate Resilience National adaptation plans (NAPs) and climate- focused agricultural policies are critical tools. For instance, Bangladesh's National Adaptation Programme of Action (NAPA) prioritizes climate- resilient crops and coastal embankments to protect rural communities from salinity intrusion (MoEF, Bangladesh 2005). Similarly, India's National Mission for Sustainable Agriculture promotes climate-smart farming techniques like zero-tillage and drought-resistant seeds (MoAFW, India 2023). These policies align with CIRDAP's mission to foster sustainable rural development by addressing region-specific

Introduction

The agricultural landscape is not just about cultivating fields; it's a narrative woven with resilience, dedication, and untold stories of women who have been the backbone of this fundamental sector for centuries. Their contributions, often overlooked or undervalued, are the bedrock of agricultural sustenance worldwide. Throughout history, women have played multifaceted roles in agriculture, nurturing crops, tending to livestock, and managing households while being instrumental in the evolution of farming practices. Despite their pivotal roles, societal norms and systemic biases have marginalized their contributions, limiting access to resources, land ownership, education, and decision-making power.