eChapters

1. EXPERIMENT 1 : INDUSTRIAL USES OF IMPORTANT CHEMICALS

Litchi (Litchi chinensis Sonn.), a member of the Sapindaceae family, originated in China. An arillate fruit, it is widely cultivated in subtropical regions of the world, providing livelihood security to millions of people in south-east Asia (GalanSauco and Menini, 1989; Menzel and Waite, 2005). Litchi is important commercial fruit crop in India. It is popularly known as “queen” of fruits due to its attractive colour, taste, flavour and excellent quality. Nutritionally, it is rich in sugar content with appreciable content of protein, minerals, fibres, vitamins and calorific value. Litchi is consumed mainly as fresh and little as processed form. The juicy aril is an excellent thirst quencher. It is highly perishable in nature. The short span of fruit availability coupled with poor shelf-life, limits duration of its availability in the domestic as well as international market. Till date, it is meagrely exploited for potential production and due R & D support is still lacking.

PRESENT STATUS

At present annual fruit production is around 585,300 metric tonnes from an area of 84,170 ha and the national productivity is 6.95 tonnes/ha. In India, main production region is concentrated in Bihar, West Bengal, Uttar Pradesh, Uttarakhand, Assam, Jharkhand, Tripura, Punjab, Haryana and Himachal Pradesh. The area under this crop has undergone substantial expansion in the past 64 years with plantation increasing from 9,400 ha in 1949 to 78,000 ha, in 2013 (NHB, 2013). Till date, the present level of production is unable to cope up with the ever-increasing demand. Its fruits are available from early-May to July in different areas.

India is recovering from the euphoria of the Green Revolution and battling the residual effects of the extensively used chemical fertilizers and pesticides in the country’s soils. The decade from 1980 to 1990 alone saw the area under pesticides in India, increased a whopping 20-fold, from six million hectares to 125 million hectares. After a high annual consumption of nearly 75000 MT reached in the early ’90s, interventions in the form of Integrated Pest Management (IPM) practices have only now started to show a declining trend in the use of pesticides in India. Interestingly, India’s consumption of pesticides per hectare is low (0.288 kg/ha) when compared with world averages—0.5 kg/ha against Korea’s 6.60 kg/ha and Japan’s 12.0 kg/ha. According to the pesticides industry statistics, India spends US $3/ha on pesticides compared with US $24/ha spent by Philippines, US $255/ha spent by South Korea and US $633/ha by Japan. Yet, despite a comparatively low use of pesticides in India, the contamination of food products in the country is alarming. About 20 per cent of Indian food products contain pesticide residues above tolerance level compared to only 2 per cent globally. No detectable residues are found in only 49 per cent Indian food products compared to 80 per cent globally. A pesticide is any substance or mixture of substances intended for preventing, destroying, repelling or mitigating any pest. Though often misunderstood to refer only to insecticides, the term pesticide also applies to herbicides, fungicides and various other substances used to control pests.

Pesticides and their metabolites have received particular attention in the last few years in environmental trace organic analysis because they are regularly detected in food products, surface/ground waters and soil strata throughout the world as consequence of their widespread use for agricultural and nonagricultural purposes. So it is the need of the hour to study the levels of pesticides residues in plants, water and soil and their fate in environment after its degradation.

It would be necessary to work out tolerance limits of pesticides residues in/on crops, soil and water and the efforts, therefore, are directed towards various residue analytical methods like TLC, GLC and HPLC etc. which are suitable for the purpose.

‘Fungi’ including ‘mushrooms’ are ‘Thallophytes’, which do not possess chlorophyll and have been classified under the Kingdom - Myceteae. They do not have stems, roots and leaves and they lack a vascular conducting system as in the case of plants. They propagate by means of spores, either asexual or sexual. Though almost all the fungi are microscopic, the mushrooms are among the largest fungi and had attracted the attention Scientists and Naturalists of many countries dating back to centuries. The Greek word ‘mykes’, which means ‘cap’, was given to the mushrooms because of the ‘cap-like’ appearance of the pileus and the Greek word ‘Mycology’ (mykes = mushroom + logos = discourse) denotes the study of mushrooms. What we call mushrooms, are actually the sporocarps produced by several species of fungi, while the mycelium that produces them live in various types of substrata and obtain nourishment from them. Usually, the fleshy, macroscopic fruiting bodies or sporocarps produced by fungi belonging to Basidiomycetes and Ascomycetes are called ‘mushrooms’

The Romans attributed the appearance of mushrooms and truffles to lightning hurled by Jupiter to the earth. Even now in India and several other countries, people believe that mushrooms appear only after lightning and thunder. The Greeks believed mushrooms as ‘Food for the Gods’. The Romans supplemented mushrooms in the food of soldiers for strength and vitality. The much-priced mushrooms were supposed to be the food delicacy of the elite society of the Romans and Greeks in olden days. The Chinese consider mushrooms as a cure for many diseases and they believe that mushrooms increase the longevity. A number of medicines in all forms are prepared from mushrooms by the Chinese.

Introduction

Baking is a traditional activity which has a long history, and according to some recent discovery, it is indicated to be dated back to as early as around 21,000 B.C. It is termed as a complex operation of prolonged heat transfer through radiation, convection, and conduction. Baking is considered to be one of the oldest methods of cooking, most commonly the bread baking but it is not only limited to the bread instead it provides a wide range of products such as cookies, pastry, pizzas, breakfast cereals, etc. Baking includes lots of raw materials such as flour, water, yeast, milk and milk derivatives, shortening, sugars, eggs and some minor ingredients such as malt products, cocoa products, dough improvers, inhibitors of microbiological spoilers, spices, etc. Food items which are rich in sugar and carbohydrates such as chocolates, candies are known as confections, and the art of making these products is termed as confectionary. Confectionery can be broadly classified into two major categories, namely sweet confectionary and baked confectionery. Conventionally cake was defined as the flour based sweet food, whereas bread was defined as the flou-based non-sweet food.

Baked confectionery, also known as flour confectionery includes products such as cakes, pastries, and similar baked goods, especially which are served in dessert. These delicacies hold history not much later to the bread baking. Earlier the baked confectionery especially cakes were only affordable by the rich and were prepared for special occasions such as festivity, celebrations, etc. but now a large number of flour confectioneries are being produced in the world which is delightfully acceptable and are much more in demand by a various group of people.

Introduction

Food additives are substances of natural or synthetic origin, which are added to foods to serve a certain technological or sensory function. They are utilized in the preparation and processing of almost all types of food in order to give favorable attributes to the food. Additives are the substances which are of little or no nutritive value but are added to food to enhance its flavour, appearance or other favourable quality. They are used in the processing or storage of foods especially in the developed countries includes antioxidants, food preservatives, colouring and flavouring agents etc. Food additives are substances added to food to preserve flavour or enhance its taste and appearance (Latiful Bari and Yeasmin 2018). Some additives have been used for centuries for example, preserving food by pickling with vinegar, salting, as with bacon, or using sulfur dioxide as in some wines. The use of food additives is not a modern-day invention; they have been used for centuries. The practice probably started when man first discovered that fire would cook and thereby preserve his meat. Later he realized that the addition of salt would preserve without cooking. Food preservation began when man first learned to safeguard food from one harvest to the next and by the salting and smoking of meat and fish. The Egyptians used colours and flavourings and the Romans used spices and colours for preservation and improving the appearance of foods. Thus, food additives have been used for centuries to enhance the variety of food products, to preserve, improve its taste and appearance, and provide a better mouth feel. Food additives afford us the convenience and enjoyment of a wide variety of appetizing, nutritious, fresh, and palatable food. Their quantities in food are small, yet their impact is great.

Papaya is one of the fruit crops grown both commercially as well as a backyard crop. Papaya was mainly a backyard crop till recently. It emerged as a main commercial crop during the last decade, because of the high nutritive value. It is a rich source of Vitamin A (2020 I.U), Vitamin B1 (40 mg), Vitamin C (46mg), protein (0.5%) and mineral matters (0.4%). Ripe papaya is a favourite breakfast and dessert fruit available yearround. It is used for making fruit salads, refreshing drinks, jams, jelly, marmalade, candies and crystallized fruits. Green fruits are pickled or cooked as vegetable. Carpine, an alkaloid present in papaya, can be used as a heart depressant, amoebicide and diuretic. It is also grown for the extraction of papain, a proteolytic enzyme present in the latex, collected mainly from the green fruit. In 1875, T. P. Lucas, a British physician discovered the medicinal value of papaya and started a hospital in Brisbane, to treat patients solely with papaya. The people in Papua New Guinea use papaya for the skin and to treat rashes or sunburn or, with repeated applications, to remove the brown spots of aging. They also say that if you put papaya into the compost pile, they grow especially large! Natives in the Pacific Islands use all parts of the papaya tree for medicinal purposes — leaves, skin, seeds, bark, roots, flowers and of course, the fruit. South American women massage their breasts with thin slices of green papaya to stimulate the milk glands. Eating the fruit provides energy and nutrients for both herself and the baby. Papaya bark is used as a toothache remedy and the flowers in teas, to treat bronchial infections. For centuries, teas from the roots were used to expel parasites and to alleviate bleeding, kidney colic, and jaundice.

1. INTRODUCTION

Dielectric-barrier discharges (DBDs) also referred to as barrier discharges or silent discharges. DBDs have for a long time been regarded as the ozonizer discharge. In 1932 Buss observed that in a plane parallel gap with insulated electrodes air breakdown occurs in a number of individual tiny breakdown channels.^1,2 Recently, it was realised that plasma can be influenced, modelled and optimised for a given application through microdischarges. The most important characteristic of dielectric-barrier discharges is that non-equilibrium plasma conditions can be provided in a much simpler way than with other alternatives like low pressure discharges, fast pulsed high pressure discharges or electron beam injection. Moreover, the DBDs can breakdown most of the gases at about atmospheric pressure in a large number of independent current filaments or microdischarges. The dielectric barrier limits the amount of charge and energy deposited in a microdischarge and distributes the microdischarges over the entire electrode surface. When a dielectric-barrier discharge is operated in rare gases or a rare gas halogen mixture plasma conditions in a microdischarge channel are similar to those in pulsed excimer lasers. Consequently, each microdischarge can act as an intense source of ultraviolet (UV) or vacuum ultraviolet (VUV) radiation. The absorption coefficient of most substances increases at shorter wavelengths. So, in many cases the UV radiation is absorbed in a very thin surface layer. The xenon excimer lamp can induce photo-cleavage of water and oxygen.²

3.1 INTRODUCTION

Geographic Information System handles large volumes of data. It is important to know the nature of data, instruments from which the data is collected and represented in computers. GIS data is either spatial or aspatial. Data is an important component in GIS. Digital data are available for some projects. but for many projects, input data may not be available. Now-a-days, data is supplied by many government, private organizations and also available on internet. If data for a particular project is not available, then the user has to collect the data from satellite imageries, GPS and other instruments and maps from various sources.

Spatial Data

All locations in the earth surface are spatial data. Location of a city, location of a river, location of a lake are represented in earth by their latitude or longitude in global coordinate system or as x,y coordinate in Cartesian coordinate system. Spatial data consists of location, shape and size in earth. A village boundary is represented as a polygon in map. The village is having certain shape of irregular polygon with definite area. As all these are mappable , they are called as spatial data. But name of the village, revenue of a village and description about a village and called as non-spatial or aspatial data.

Abstract

With its core intention to raise economic status of farmers, Govt of India vows for transformation in agriculture and sets goal to double farmers’ income by 2022. Nonetheless, net income increase at the farm is amalgamation of technologies, tactics and government policies. Farmers realized 3-4 times increment in their profit during era of green revolution when high yielding varieties and chemical fertilizers were introduced in early seventies. Subsequently income enhancement of the farmers continued through raising of farm productivity per unit area and entrepreneurship. Thus Indian agriculture experienced transformation through chemical fertilizers, high yielding varieties, synthetic pesticides, off-season cultivation, high yielding breeds, export orientation and entrepreneurship development in food processing, mushroom production, dairying and poultry. With the result, India emerged as top producer of milk, millets, pomegranate, banana, mango, jute, pulses, okra, safflower etc and second top producer of wheat, rice, tea, tomato, potato, onion etc and third in egg production and fourth in poultry meat. Consequence was evolution of commercial farming from subsistence farming. In era of globalization and increased purchase power of consumers, profitability at the farm has become subject of competitiveness, quality and consumer preference. Price shoot-up and market crashing of commodities in the country has made agriculture, a profession of risk, uncertainties and unpredictability. It has thus, lost creditability of socioeconomic security. To make it remunerative and attractive, a combo plan of transformational technologies that has the competence to break production and productivity barriers and can also address market needs as well as consumer preferences is highly wanted. There is urgent need to infuse characteristic of market orientation in agriculture through marketing information system and promoting demand driven production system with focus on zonalization of crops taking advantage of niche area or geographical indications. Commodity supply must remain high through promotion of climate resilient varieties or breeds, mechanization, adoption of hi-tech crop and livestock management practices. All this has to be made sustainable by way of produce and product diversification through integrated farming system, organic agriculture and secondary agriculture. Considering future vision, research initiatives must continue on noble areas like vertical farming and in vitro farming. Information and communication technologies will open avenue for assured marketing by linking production to consumption system via proper marketing and distribution leading to increased farm profitability. This as a whole will make transformation in agriculture a reality.

8.1 Introduction

Solar energy can be directly converted into electrical energy. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1.They are reliable, convenient and durable.

2.It is green, sustainable and pollution free technology.

3.Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).

4.Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.

5.Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.

6.Considerable expected lifetime i.e. 20 years or even more.

Abstract

Carrying out effective and sustainable agriculture has become an important issue in recent years. A key to this is the usage of modern technologies for precision agriculture. Recent technological developments allowed envisioning sensor devices with distributed ambient sensory network, which could be a potential technology for monitoring various natural phenomena (weather parameters, soil moisture, etc.) at micro level. As more and more agricultural data are virtually being harvested along with the crops and are being collected/ stored in databases, the same can be used in productive decision making if appropriate data mining techniques are developed/applied. As a case study for this, an experiment was conducted with four consecutive agricultural (Kharif and Rabi) seasons in a semi-arid region of India to understand the crop-weather-environment-pest/diseases relations using wireless sensory and field-level surveillance data on closely related and interdependent pest/disease dynamics of groundnut crop. Association rule and multivariate regression mining techniques/algorithms were propose developed /tailor-made to turn the data into useful information/ knowledge/relations/trends to know crop-weather- environment-pest/disease continuum. These findings have been used for development of prediction models (cumulative and non-cumulative) followed by a web based pest/disease decision support system.

Keywords : Data Mining, Pest/Disease Management, Precession Protection, Wireless Sensor Networks

Maize (Zea mays L.) occupies an important place in world agriculture due to its high yield potential and greater demand. Because of its divergent character, maize is grown over a wide range of climatic conditions, ranging from near sea-level to several thousand meters above sea-level (2,700 msl). It can also be grown in all types of soils ranging from sandy to heavy clay. Among the factors adversely affecting productivity, incidence of diseases is prominent. In India Maize is prone to a number of biotic stresses like foliar diseases, downy mildews, banded leaf and sheath blight, stalk rots and ear rot caused by fungi and bacteria, incidence of which are variable in time, space, and genotype. Disease may be minimized by the reduction of the pathogen’s inoculum, inhibition of its virulence mechanisms, and promotion of genetic diversity in the crop (Richard et al., 2005). Conventional plant breeding for resistance has an important role to play that can now be facilitated by marker-assisted selection.

Chemical control measures for some of the diseases are helpful in reducing losses, however for stabilizing production it is necessary to build level of genetic resistance. Germplasm improvement programme undertaken in sixties and early seventies by All India Co-ordinated Maize Improvement Project provided an opportunity for combining resistance against important diseases with other desirable agronomic traits. Thus, breeding for resistance had been an important objective of the overall crop improvement programme and it had been a cooperative venture of the plant breeders and plant pathologists. Consequently, it was recognized that there should be an efficient technique for the mass multiplication of inoculums, artificial inoculation technique and scoring/rating of plant disease as a pre-requisite for the successful identification of resistant sources in such improvement programme. With these objectives in to consideration, a six days seminar on the “Techniques of scoring for resistance to diseases of maize in India” was held at Andhra Pradesh Agriculture University, Hyderabad during 15-20 March, 1982 (Payak and Sharma, 1983).

Pathology is derived from Greek word (Pathos=disease + logos=study). It is study of structure and function of body in disease.

Veterinary Pathology is the study of anatomical, chemical and physiological alterations in comparison to normal due to disease in animals. Pathology has responsibility to forms a vital bridge between preclinical sciences (Anatomy, Physiology, Biochemistry) and clinical branches of medicine and surgery.

General Pathology deals with the basic alterations of tissues as a result of disease. e.g. fatty changes, thrombosis, amyloidosis, embolism, necrosis etc.

Systemic Pathology is related to the alterations in tissues/organs of a particular system. e.g. respiratory system, genital system etc.

Special Pathology is the application of the basic reactions of gene general pathology to various specific diseases.

Gross or Macroscopic Pathology is the examination of tissue without the help of a microscope.

Sampling for nematode population estimation

Sampling for nematode communities has been the basis for the development of appropriate control strategy. The major purposes of sampling for nematodes include population estimation for general detection, advisory or predictive programme, disease diagnosis and also for research purposes.

Plant parasitic nematodes are usually confined to top 20-25 cm soil and may vary depending upon the soil type, moisture content, host plant and climatic condition. Surface soil do not harbour any nematode. The roots and rhizosphere of severely infested plants do not harbour numerous nematodes as the nematodes tend to move to adjacent healthy plants. Hence soil and root samples need to be collected from plants showing partial symptoms. Samples should not be collected from dead or wilted plants.

Natural resources conservation and their management hold key to sustainable agriculture and livestock production. It is all the more crucial for countries with predominant agrarian economies where development of sustainable agriculture is essential for overall growth, redressal of poverty and security. Conservation of both soil and rain water as very crucial and basic resources have been practiced since ancient times in India. However, there has been renewed emphasis on conservation and efficient utilization of these resources in the recent past. The fact that 70% of the arable area of India is rainfed with precarious supply of water and that rainfed agriculture supports 44% of India’ s human population and contributes 90 per cent of coarse cereals and pulses, 80 per cent of oilseeds and 65 per cent of cotton and growing realization that further gains i n productivity of crops and livestock will emanate from rainfed regions, leave no room for complacency in this regard.

Year after year, the fate of a vast ‘majority of Indian farmers hangs in balance, as success with rainfed agriculture continues to be a gamble. It is evident that crop yields in semi-arid areas depended more on rainfall distribution than on total rainfall and lack of serious efforts to create d water supply for crops through scientific management of rainwater is a factor favouring this avoidable uncertainty. In rainfed agriculture no other input can perhaps enhance the yield without effectively tackling of the rainfall aberration related sub-optimal moisture availability. Therefore a prerequisite for substantial improvement in the agriculture production in the semi-arid region is to manage runoff water and to use it either at the time of moisture stress even during the monsoon or in next season. It has been reported that only one supplementary irrigation at proper stage can double of Rabi crops. But supplemental water is a developed resource and is more expensive than the natural resources. Hence, it is all the more necessary to use this water judiciously and efficiently. Standardization of techniques by which as much of precipitation as possible can be conserved for crop use, either directly in the soil profile through infiltration or through runoff collection and recycling is an area of priority in research.

A wide variety of fungal and bacterial pathogens cause postharvest disease in fruits and vegetables. Some of these infect produce before harvest and then remain quiescent until conditions are more favourable for disease development after harvest. Other pathogens infect produce during and after harvest through surface injuries. In the development of strategies for postharvest disease control, it is imperative to take a step back and consider the production and postharvest handling systems in their entirety. Traditionally fungicides have played a central role in postharvest disease control. However, trends towards reduced chemical usage in horticulture are forcing the development of new strategies. Controlling or reducing disease relies on integrated crop and postharvest management, with attention to fungicide application, crop hygiene and nutrition, and the management of ripening, to optimise advantages conferred by the plant’s natural resistance factors that prevent and delay disease development. Agricultural production and food distribution systems have evolved over many years to a complex system which allows for nearly year-round supply of most fresh commodities through longterm storage and long distance shipments to consumers. The expectation of year round supplies has resulted in increased challenges for postharvest handling systems. The availability of fungicides for disease management likely played a major role in the evolution of our current system of food distribution (Mitcham, 1999). With the recent loss of registration of many postharvestfungicides and more expected under the Food Quality Protection Act (FQPA), as well as consumer pressure to reduce the amount of chemicals used on food, the challenge to maintain our current system of food distribution increases.

Abstract

Production of healthy and vigorous seedlings is the foremost crucial step for raising a successful vegetable crop. Now a days seedlings are raised in trays under controlled atmospheric conditions called as transplants. As soil substitutes, artificial media made of perlite, vermiculite and peat moss are commercially available. A good rooting medium should be light weight, well drained, well aerated, and soilless with or without starter solution or added nutrients and with good water and nutrient holding capacity. The media should be sterilized before use. Selection of trays for cell shape, size and number depends on the type and nature of crop. Most of the vegetable transplants are now being produced in hardened plastic or polystyrene containers. Only good quality certified seeds should be used in media filled trays after priming, pelleting, coating or other seed treatments as per the crop requirement. Germination chambers as insulated rooms to maintain suitable conditions over large period of time may also be used. Generally vegetable crops need fertilizer application after expansion of first true leaf. Young seedlings are managed carefully to avoid any toxicity while taking care of their nutrient management. Water requirement also depends on growth stage and variation in weather conditions. Other seedling management practices include shading, thinning, weeding, disease/pest control, hardening off and subsequent transplanting. Containerized greenhouse plants can be grown using the conventional “rail” (or rack) system or the “float” system. Shipping factors such as mechanical injury, environmental conditions and length of storage affect plant vigour and establishments. IPM (integrated pest management) offers a practical way to effectively manage pests on vegetable bedding and transplants.

Radionuclides are used in two major ways: for their chemical properties and as sources of radiation.

Radionuclides of familiar elements such as carbon can serve as tracers because they are chemically very similar to the non-radioactive nuclides, so most chemical, biological, and ecological processes treat them in a near identical way. One can then examine the result with a radiation detector, such as a Geiger counter, to determine where the provided atoms ended up. For example, one might culture plants in an environment in which the carbon dioxide contained radioactive carbon; then the parts of the plant that had laid down atmospheric carbon would be radioactive.

In medicine, radioisotopes are used for diagnosis, treatment, and research. Radioactive chemical tracers emitting gamma rays that can provide diagnostic information about a person’s internal anatomy and the functioning of specific organs. This is used in some forms of tomography single emission computed tomography and positron emission tomography scanning. Radioisotopes are also a promising method of treatment in hemopoietic forms of tumors, while the success for treatment of solid tumors has been limited so far. More powerful gamma sources are used to sterilize syringes and other medical equipment. About one in two people in Western countries are likely to experience the benefits of nuclear medicine in their lifetime.

In biochemistry and genetics, radionuclides are used to label molecules and allow tracing chemical and physiological processes occurring in living organisms, such as DNA replication or amino acid transport.

Physiological disorders are abnormalities in plants which are associated to non-pathogenic factors. A plant or its parts may show unusual growth, function or deformity. Such abnormalities are widely referred to as disorders. These may be incited by nutrients deficiency or excess, hormonal imbalance, abnormal growing conditions etc. Some commonly observed disorders have been dealt in here suitably.

Extension Programme: Planning and Evaluation

The first step to promote any extension programme is to prepare useful programme based on community need. Extension Programme planning is a blueprint or plan to an extension worker for effective execution. It is a procedure of working with people in an effort to identify and recognise the unsatisfactory situations or problems and to determine the possible solutions. To understand the extension programme planning process, certain basic concepts of an extension programme, planning and extension planning need to be understood.

Programme

The word ‘programme’ has several distinct meanings in the dictionary. It means a proclamation, a prospectus, a list of events, a plan of procedure, a course of action prepared or announced beforehand, a logical sequence of operations to be performed in solving a problem. This is a written statement which describes the extension activities proposed, the problems they address, the premises on which they are based, the objectives they seek to attain, the actions and the resources they require.

Sustainable development has caught the imagination and action across the world. Sustainable agriculture is necessary to attain the goal of sustainable development. The word “sustain,” is derived from the Latin sustinere (sus-, from below and tenere, to hold), to keep in existence or maintain, implies long-term support or permanence. As it pertains to agriculture, sustainable describes “Farming systems that are capable of maintaining productivity and usefulness to society indefinitely. Such systems must be resource-conserving, socially supportive, commercially competitive, and environmentally sound”. “Sustainable agriculture is the successful management of resources for agriculture to satisfy changing human needs while maintaining or enhancing the quality of environment and conserving natural resources” (FAO). All definitions of sustainable agriculture lay great emphasis on maintaining an agriculture growth rate, which can meet the demand for food of all living things without draining the basic resources. Over time, the International Alliance for sustainable agriculture and an increasing number of researchers, farmers, policy-makers and organizations worldwide have developed a definition that unifies many diverse elements into a widely adopted, comprehensive, working definition

The H.C.F and L.C.M are very important and many questions are asked in almost all competitive examinations to judge the students ability and also capability to solve the problem. This concept is useful in the chapters of time and distance, time and work, pipes and cisterns, etc. The tricks used to find L.C.M and H.C.F of two or more numbers help in finding out quick solutions and thus reduce time during exams. L.C.M concept is important to solve problems related to racetracks, traffic lights, etc. H.C.F. concept is useful in calculating the largest size of tile/room in particular area, largest tape to measure the land, etc.

Simple interest?

Simple interest can be simply defined as the interest that is paid only on the principal amount. Unlike compound interest, simple interest does not consider “interest on interest” concept and the value is obtained by multiplying the interest rate by the principal amount and the number of days that elapse between payments.

Basic Definitions

Percent means ‘hundred’ and the sign % is read as percentage and x % is read as x percent. In other words, a fraction with denominator 100 is called a percent. In other words, “Percent” can be understood as “per 100” or “out of 100”. Percentage in itself is a dimensionless number used to tell how many parts per hundred are being considered. It is often denoted using the percent sign, “%”. The reference point for calculating percentage is taken as 100.

For example, 20% means 20/100 (i.e. 20 parts from 100). This can also be written as 0.2.

Time, Speed and Distance

This section consists of problems on calculating speed, distance, time, head start and relative speed etc.

12.1. Introduction

All soils invariably contain soluble salts. However, physico-chemical and biological soil properties start degrading when excessive amount of salts are accumulated in soil, particularly in rhizosphere, due to several anthropogenic activities and environmental conditions, and crop production is severely affected. Then we refer those soils as salt-affected soil.

The need of intensive agriculture to keep pace with the increasing world population for their food requirement necessitates to bring more agricultural land area under irrigation. However, irrigation system without taking enough drainage provision and poor water quality and its poor management may make the situation worst due to the development of salt-affected soils that ensue unproductive soil and low crop yield. Crops grown on salt-affected soils suffer from high osmotic stress, nutritional disorders due to nutrient (N, Ca, K, P, Fe, Zn) deficiency, specific ion toxicities, poor soil physical conditions and as a consequence, a reduced crop productivity.

Although it is considered that the rocks and minerals on weathering lead to salt accumulation in the soil, but the salt-affected soils are not truly originated from the accumulation of such salts in situ. On the contrary, occurrence of salt-affected soils is due to receiving salts that come from other locations with water. Sea water inundation in coastal belt, irrigation with poor quality water including saline groundwater, poor drainage system, irrigation adopting unscientific ways leading to waterlogging, shallow water table etc. contribute heavily toward development of salt-affected soils. Salt-affected soils may occur under almost all climatic conditions. Their distribution, however, is relatively more extensive in the arid and semi-arid regions compared to the humid regions because of poor precipitation to leach soluble salt adequately. Since evapotranspiration greatly exceeds precipitation in these climatic conditions, the soluble salts move upward with water due to capillary action and are left behind on the surface soil and the rhizosphere, once water is evaporated. The commanding ions of accumulated salts in affected soil are sodium, potassium, magnesium, calcium, chlorides, sulphates, carbonates and bicarbonates. The nature and properties of salt-affected soils are so diverse that they require specific approaches for their reclamation and management. Therefore, it is necessary to know their origin, formation, nature, chemistry and properties in detail to classify them into groups for their proper management to maintain sustainable agriculture.

4.1 Introduction

The present chapter starts with a brief description about the history of commodity futures market and emergence of commodity futures market in India. There after it highlights various functions of commodity futures market and their impact on farmers and various other stake holders in the supply chain. Finally, it tries to evaluate the utility of futures from the platform of commodity exchanges especially from MCX and NCDEX of India.

A simple definition of a commodity is a physical substance that can be extracted directly from the environment, processed and sold commercially. Natural resource is another term often used to describe commodities which occur naturally in or on the ground. Commodities fall into three main categories such as energy, metals and agriculture. As commodities can be sold, they have a price which is governed by supply and demand. Compared to many manufactured items, for example flat screen TVs, the question of supply and demand is paramount to how commodities are priced. The commodities that have always been a part of our day-to-day existence are also one of the finest investment avenues available. The wheat in our bread, the cotton in our clothes, our gold jewels, the oil that runs our vehicles etc are all traded across the world in major exchanges. Commodities can be traded on either spot markets, or in the form of futures. Spot markets are those in which the commodity is traded immediately in exchange for cash or some other good. In the form of futures (or options), what is traded is not the goods itself, but a contract to buy or sell the commodity for a certain price by a stated date in the future. Over the ages, commodities have been the basis for trade and industry. They have prompted commerce, encouraged exploration and altered the histories of nations. Today, they play a very important role in the world economy with billions of dollars of these commodities traded each day on exchanges across the world. Commodities today have become an attractive investment vehicle. In the current investment scenario, it is increasingly getting difficult for individuals and institutions to create a well-balanced investment portfolio. With uncertainty in interest ratio, it is tough for the investor to beat the ever-rising inflation. Averse to being over exposed to equity markets, the investors are left with limited choices… well no more!

2.1. Guidelines for Pest Risk Analysis

This standard describes the process of pest risk analysis for plant pests for the purpose of preparing phytosanitary regulations by National Plant Protection Organizations. Pest risk analysis (PRA) consists of three stages: initiating the process for analyzing risk, assessing pest risk, and managing pest risk.

Initiating the process involves identification of pests or pathways for which the PRA is needed. Pest risk assessment determines whether each pest identified as such, or associated with a pathway, is a quarantine pest, characterized in terms of likelihood of entry, establishment, spread and economic importance. Pest risk management involves developing, evaluating, comparing and selecting options for reducing the risk.

PRA is only meaningful in relation to a defined “PRA area” considered to be at risk. This is usually a country, but can also be an area within a country, or an area covering all or parts of several countries [e.g. the area covered by a Regional Plant Protection Organization (RPPO)].

12.1. Introduction

The protocols provides guidance on the structure and content of the International Plant Protection Convention (IPPC) diagnostic protocols for regulated pests. The protocols describe procedures and methods for the official diagnosis of regulated pests that are relevant for international trade. They provide at least the minimum requirements for reliable diagnosis of regulated pests.

This standard sets the framework for the content of diagnostic protocols, their purpose and use, their publication and their development. Diagnostic protocols for specific regulated pests are included as annexes to this standard. Information relevant for diagnosis is provided in the diagnostic protocol on the specified regulated pest, its taxonomic position, and the methods to detect and identify it. Diagnostic protocols contain the minimum requirements for reliable diagnosis of the specified regulated pests and provide flexibility to ensure that methods are appropriate for use in the full range of circumstances.

The methods included in diagnostic protocols are selected on the basis of their sensitivity, specificity and reproducibility, and information related to these factors is provided for each of these methods. Detailed information and guidance for the detection of pests is provided on, for example, signs and/or symptoms associated with the pest, illustrations (where appropriate), developmental stages of the pest, and methods for detecting the pest in a commodity, as well as methods for extracting, recovering and collecting the pests from plants.

8.1 The purpose of erosion research

The need for research

A soil conservation programme needs to be based on factual information about rates and quantities of erosion. For example some land obviously needs to be protected by mechanical works such as channel terraces, some land equally obviously does not need any protection, and a great deal of land lies somewhere between the two extremes. At some point the terraces become unnecessary or uneconomic, but a logical decision on where to draw the line can only be made if data are available on how much soil erosion is occurring and how much it would be reduced by terraces. Similarly, the effect of channel terraces should be compared with the effect of alternative measures, and the effect should also be measured on the different soils and crops which are likely to be encountered.

Nowadays there are excellent opportunities for research workers to exchange the results of their work. The national and iniernational journals are packed with accounts and results of research reports in their proceedings (as listed in Further reading). Some of the reported research results can be usefully applied in countries other than where the research was done, but care is required in any transfer of technology. If the local conditions of soil, climate, or land use, are different, the results may not apply. However, research in other situations can often serve as a pilot trial to show which factors should be studied locally. Even when local conditions are so different that the results do not apply at all, the techniques and apparatus developed by other workers can still be helpful.

1.1 INTRODUCTION

This volume is concerned with the chemistry of soil processes. These are rather arbitrarily divided and discussed in the first part of this book in terms of mass flow and diffusion, precipitation, cation, anion and ligand exchange, adsorption, translocation of metals, and oxidation and reduction. The way in which these processes operate to determine the fate of different substances added to soils is described in the remaining part of the book. In this initial chapter an attempt is made to show how the individual chemical processes described later combine with physical and biological processes to give soils their ability to support plant life, and to accept the detritus of the world and to convert it to harmless constituents of the soil mass.

Chickpea (Cicer arietinum L.) is a self-pollinating diploid (2n=2x=16) with a genome size of 740 Mbp and belongs to family Fabaceae (or Leguminosae). In a scientific advance involving scientists from more than 20 research organizations, sequencing of the chickpea genome was recently completed for 90 chickpea genotypes, including several wild species. The researchers responsible for the work, led by ICRISAT, succeeded in identifying more than 28,000 genes and several million genetic markers that scientists expect will lead to the development of superior varieties.

Thoracic Vertebrae

Ox: Thoracic vertebrae characterized by well developed neural spines, short bodies with capitular facets and transverse processes with tubercular facets for articulation with the ribs (Fig.4.1).

The term nanotechnology, buzzword of present day science owes its origin from the Greek word ‘nano’ literally meaning dwarf. When it is expressed in terms of dimension one nanometer equals to one billionth of a meter (1nm = 10-9 m). A nanometer is a thousandth of a thousandth of a thousandth of a meter, about 60,000 times smaller than a human hair in diameter or the size of a virus, a typical sheet of paper is about 100,000 nm thick, a red blood cell is about 2,000 to 5,000 nm in size, and the diameter of DNA is in the range of 2.5 nm. Therefore, nanotechnology deals with matter that ranges from one-half the diameter of DNA up to 1/20 the size of a red blood cell. 

1.1 Introduction

Increased emission of greenhouse gases results in climate change which becomes one of the most prominent environmental issues to the world today. Carbon dioxide (CO2) is the major greenhouse gas whereas nitrous oxide (N2O) and methane (CH4) are other substantial contributors to climate change (IPCC, 2014, Tongwane et al., 2016). However, these gases are emitted in minimal quantities in comparison to carbon dioxide but impart more global warming effect by absorbing more infrared radiations (Oertel et al., 2016). The warming potential of one kg of CH4 is 23 times more than one kg of CO2 while  in the case of N2O, it was nearly 300 times more than CO2 (Ramaswamy et al., 2001, Bharti et al., 2019; Biswas et al., 2010). Around one-third of methane and two –thirds of nitrous oxide come from soil (Prather et al., 1995, Tubiello et al., 2015, Smith, 2016).

Medicinal plants are non-food non-plantation crops.

These are rich in secondary metabolites viz. alkaloids, glycosides, coumarins, flavonoides and steroids, etc.

Union government of India has started a project on 'Traditional Knowledge Digital Library' under which it is documenting all Ayurvedic formulations in a digital form to avert patent threats from companies in the developed world

Cardiac ultrasound is also known as echocardiography and it has a very important place in the diagnosis of cardiac diseases of the humans as well as animals. Echocardiography is an imaging of the heart using ultrasound. The diagnosis of congenital heart diseases, shunts, complex malformations, valvular heart diseases, different cardiomyopathies, endocarditis, pericardial effusion, cor pulmonale and cardiac tumours has been possible by cardiac ultra ultrasound that was otherwise difficult.

For the sake of convenience ruminants are broadly divided into two categories as large ruminants and small ruminants. Large ruminants consist of cattle and buffaloes and small ruminants consist of goats and sheep. Sonography is becoming an important part of diagnostic modalities in ruminants also. Its major use in ruminants is in reproduction and lameness.

Q. 1 Psychrometric chart is a graphical representation of which properties
of air
(A) Chemical        (B) Aerodynamic
(C) Hygroscopic   (D) Thermodynamic

Soil is a dynamic, vital living natural resource. Soil health is the condition of the soil and its potential to sustain biological functions, maintain environmental quality, and promote plant and animal health. It is qualitative trait of soil. Healthy soil is the foundation for profitable, productive, and environment friendly agricultural systems.

The livestock sector has emerged as a vital sector for ensuring a more inclusive and sustainable agriculture system. Livestock production can be an important
component of a sustainable agricultural system because it can provide a quality source of plant nutrients, be an income generator, and provide an environmentally
sound use of certain lands. Some farmland is just not suitable for crop production, but may be utilised sustainably for livestock production.

ACID-FORMING FERTILIZER: A term applied to commercial fertilizers which leave an acid residue in the soil. The amount of calcium carbonate required to neutralize the acid residue is referred to its equivalent acidity.

Entrepreneurial climate depends on the existing economic system. Existing social and political establishment and existing economic policies of Government determine the economic system. Entrepreneurial development is largely due to the existence of this economic system. Business development functioning as a new component, economic structure and economic transformation. The economic system varies from country to country, so the business development process varies.

Important Points to Remember

Apple

• Botanical name: Malus x domestica Borkh.
• Family: Rosaceae
• 2n: 34
• Origin: Asia Minor to Western Himalayas

Abstract

This chapter explains the cooperation which create social relations that help individuals achieve goals that they could not achieve alone. They also help farmers benefit from economies of scale and reduce risks, and empower their members economically and socially by involving them in decision-making processes.