eChapters

Stem-borer: Sahyadrassus malabaricus: Hepialidae

Presence of the pest is understood when chewed tissue is seen at at the col­lar region. The mouth of the tunnel in which the borer feeds show pieces of bark, wood and frass particles held together by silk. The saplings break off at the point of injury. When the main stem is attacked, there is mat-like frass at basal region of stem. Larvae girdle main stem and bores downward killing the tree.

Adult moth is peculiar and hangs vertically down by the support of two pairs of legs. Egg period is for 7-10 days, and larvae live for about 10 months inside the larval tunnels. They pupate for 3-5 weeks.

Coriander aphid: Hyadaphis coriandri: Aphididae

Coriander aphids are yellow-green in color, dusted with grayish wax. They have short, dusky, slightly swollen, siphunculi (or cornicles). The Aphids form dense, damaging colonies on leaves, heads, and stems of their host plants.

In its native land, Florida, USA, the life cycle of the coriander aphid is similar to that of other host-alternating aphids. Overwintering eggs occur on other hosts.  A fundatrix (or stem mother) hatches from the egg in the spring. Her offspring are parthenogenetic, and the winged-females are spring migrants. They colonize summer host plants in the family Umbelliferae.

Scale insects:Pseudaulacaspis cockerelli, Parasaisettia nigra:Coccidae

Attack Adults and nymphs feed on plant sap and cause wilting and drying of seedlings and young plants.
 
Brown soft scale: Lecanium sp. (=Coccus) hesperidum : Coccidae

Thrips: Thrips tabaci: Thripidae

The nymphs and adults of the thrips desap from the narrow spaces between the inner leaf axils. Leaves are faded, with curled tips and shining silver streaks or brown spots.  Many minute yellow or white insects are seen moving, generally near the base or middle of leaves and they suck the sap from the plants.  Plants are faded and the yield is reduced.

Leaf-and shoot folders: Hymenia recurvalis : Pyraustidae

Pycnarmon cribrata;Phostria piasusalis

Sciarid(mushroom flies): Bradysia paupera, Lycoriella auripila: Sciaridae

The larvae feed on the mycelial attachments and restrict the growth of the spawn. The maggots also feed on the developing mushrooms or pinheads and thus cause loss in yield. They also bore the developing mushrooms and render them hollow.

Reducing insecticide application to the lowest level is the motto of IPM in vegetables. Monitoring for the initial build up and timely mechanical removal of the first population is a must in vegetables. Always remove the first affected plants, by diseases like mosaic, and destroy them by burying or burning. Remove insect eggs, insect affected plant parts and adults and immature stages of insects, and destroy them every day. Do not throw them in the field. They will either come back, or pupate and attack later. During nursery stage, use wood ash, cow dung solution, and plant extracts to deter all pests. Use only low residual insecticides like Dichlorvos 1ml/l, Malathion 2ml/l, Endosulfan 2ml/l or Quinalphos 2ml/l, in spots, at the beginning of attack itself.

Paper chromatography (P.C.) is the easiest to perform and requires simple and ordinary apparatus. It easily provides qualitative information since components of a mixture can be separated based on their mobilities or molecular weights. It also can provide quantitative information if some special attention and calculation procedures are followed. Paper chromatography is a technique that involves placing a small dot or line of sample solution on to a strip of chromatography paper. The paper is placed in a jar containing a shallow layer of solvent and sealed. As the solvent rises through the paper, it meets the sample mixture, which starts to travel up the paper with the solvent. This paper is made of cellulose, a polar substance, and the compounds within the mixture travel farther if they are non-polar. More polar substances bond with the cellulose paper more quickly, and therefore do not travel as far.

This technique is used in the separation of ionised and ionisable compounds.It consists of an insoluble matrix to which charged groups are covalently bound. The charged groups are associated with mobile counter ions. These counter ions can be reversibly exchanged with other ions of the same charge without altering the structure of the matrix.

The ion exchanger is complex and polymeric. The polymer carries an electric charge that is exactly neutralized by the charges on the counter ions. These active ions are cations in a cation exchanger and anions in an anion exchanger. A cation exchanger consists of polymeric anions and active cations whereas anion exchanger consists of polymeric cations and active anions. Amberlite IR 120 and Dowex 50 WX are cation exchangers while Amberlite IRA 400 and Dowex 1X are anion exchangers. Ion exchangers should be insoluble in water and hydrophilic to allow the ions to pass through. It should be chemically stable and should be denser than water when swollen.

Atomic-absorption (AA) spectroscopy uses the absorption of light to measure the concentration of gas-phase atoms. Since samples are usually liquids or solids, the analyte atoms or ions must be vaporized in a flame or graphite furnace. The atoms absorb ultraviolet or visible light and make transitions to higher electronic energy levels. The analyte concentration is determined from the amount of absorption. Applying the Beer-Lambert law directly in AA spectroscopy is difficult due to variations in the atomization efficiency from the sample matrix, and non-uniformity of concentration and path length of analyte atoms (in graphite furnace of AA). Concentration measurements are usually determined from a working curve after calibrating the instrument with standards of known concentration.

Atomic-absorption (AA) spectroscopy uses the absorption of light to measure the concentration of gas-phase atoms. Since samples are usually liquids or solids, the analyte atoms or ions must be vaporized in a flame or graphite furnace. The atoms absorb ultraviolet or visible light and make transitions to higher electronic energy levels. The analyte concentration is determined from the amount of absorption. Applying the Beer-Lambert law directly in AA spectroscopy is difficult due to variations in the atomization efficiency from the sample matrix, and non-uniformity of concentration and path length of analyte atoms (in graphite furnace of AA). Concentration measurements are usually determined from a working curve after calibrating the instrument with standards of known concentration.

When a fixed voltage is applied to two electrodes dipping into a solution,a current will flow, depending on the conductivity of the solution. Conductivity measurements do not give information about the nature of the ions in solution. However, they are useful in the quantitative measurement of the ions.

Organic material especially, seeds, grains, leaves, fruits and nuts contain prominently three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds and nuts contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein only. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for their quality as well as commercial value.

Fig. 25: ICPH 2671 in field

To overcome the challenge of popularizing pigeonpea hybrids in the country, it is considered fair enough to compare the hybrid rice with respect to their seed production technology, yield advantages and profitability to the farmers and seed producers. Since both pigeonpea and rice are grouped under self-pollinated crops, this comparison, in the views of authors, may help in encouraging hybrid pigeonpea seed producers and those involved in marketing of hybrid seed.
  
Rice is a highly self-pollinated crop and earlier hybrids were not possible because it was essential that large quantities of hybrid seeds are produced easily and economically. In China, the birth place of hybrid rice, this impossible looking task was accomplished. To launch this program, the Chinese scientists decided to alter the pollination system of rice.

With the advent of hybrid technology, it is natural to assess its potential benefits at the national level. To meet the domestic requirement of pigeonpea, about 50.000–60,000 metric tons of pigeonpea is imported annually from Myanmar and Africa. In this communication, an attempt has been made to look into the possibility if we can meet the entire domestic needs of pigeonpea through the adoption of hybrid technology. It is a big question but the goal is not impossible. The estimates shown in Table 18 show that if only 2% of total pigeonpea area can be brought under hybrids, the target can be met with ease. This will require seed production in only 700-800 hectares.

The hybrid breeding program in pigeonpea is unique and the first among the food legume. The concept of hybrid in this crop was conceived in 1974; and it is based on a small window of natural out-crossing present in the crop. This natural out-crossing in pigeonpea is mediated by a range of flying insects, which forage on large bright colored flowers of the crop in search of nectar and in the process affect the cross-fertilization. In the last 40 years a lot of basic and applied research has been successfully completed and over 50 research papers have been published in national and international journals of repute. A coordinated effort of scientists of different institutions has led to the release of two hybrids, one for central and another for peninsular zone of India.

Vegetables which are consumed raw without cooking are known as salad crops.  In temperate regions, a large number of quick growing cool season crops like lettuce, celery, parsley, endive, chicory, chervil, cress, water cress etc. are consumed as raw. Only lettuce and celery are cultivated on a commercial scale in developed countries.  Growing awareness on nutritional values of raw vegetables and also health consciousness of people resulted in increased consumption of salad vegetables in tropics too.  Vegetables like onion, cucumber, tomato, carrot, radish, beet root, cabbage, capsicum, melon etc. are used as salads without cooking.

Abstract

Twenty seven genotypes including two wild relatives of strawberry were evaluated for resistance against leaf spot caused by various fungal species viz.,Phyllosticta, Pestalotia, Hainesia lythri and Phyllosticta fragaricola under natural conditions. None of the genotypes was found to be resistant against leaf spot. However, the cultivar ‘Fern’ showed moderately susceptible reaction whereas the remaining genotypes were either susceptible or highly susceptible, suggesting the need for diversifying the germplasm either through open pollinated seedling selection or through hybridizing genotypes of divergent origin for resistance against leaf spot.

Starters are selected strains of micro-organisms deliberately added to milk during conversion into cheese, dahi, yoghurt and other fermented dairy products to bring about specific changes in the appearance, body, texture and flavour characteristics of the desired final products.

Functions of Starters

The primary function of almost all starter culture is to develop acid in the product. The secondary effects of acid production include coagulation, expulsion of moisture, texture formation and initiation of flavour production. In addition to these, the starters also help in imparting pleasant acid taste, conferring protection against potential pathogens and providing a longer shelf life to the product. These bacteria convert 1% of lactose in milk approximately to lactic acid with very little by-products such as acetic acid, ethanol, CO2 and normally with no substances causing taints and hence leading to a clean and wholesome milk souring.

In today’s times, a lot of innovation has come into agriculture. This very hard occupation requires an amalgation of farmers with the scientists. From the rural areas after education the technocrats are moving to the cities and this is creating a great loss to the agriculturists. As the population is growing so is the demand for food. Due to shortage in the storage systems the amount of wastage has increased a lot. It is an important aspect to be looked into. A lot of waste material is seen in the vegetable markets, city markets and near the slums. This causes a lot of pollution and spoils the environment. It is important to know why is it increasing and why the facilities for wastes do not exist.

After the agricultural activities a number of by-products are obtained and these are known as agricultural waste. These include residues of different crops like stalks, straws, leaves, roots, husks and shells. The animal waste is in the form of manure. All these agricultural wastes are free of cost however; they can be utilized as an important resource (Lionel and Arnold, 1931). Agrawal (1998) has mentioned India as the final dumpyard. The wastes obtained from various resources can be converted into heat, steam, charcoal, methanol, ethanol, biofuel, compost, energy, biogas, construction and high valued chemical compounds. Many times these agri-industrial wastes are not completely utilized and either they rot in open areas or are burned in the fields.

In the Asian and Pacific ‘region, it is China alone which produces the largest quantities of agricultural waste and also crop residues. This is followed by India. From the production of rice, corn and wheat alone 587 million tons of residues are generated per year in China. Maheshwari (2014) has surveyed the proportions of waste that Malaysia generates from the production of rice, palm oil, rubber, coconut and forest products. In Myanmar the crop waste and residues constitute about 4 million tons per year out of which more than half constitutes rice husk.

There is no cereal in the world which has no immense patentability as in maize and that’s why it is called the “Queen of cereals”. It is the world’s leading cereals crop after rice and wheat. It is one of most important cereals of Nepal. At national level, it stands second position after rice in term of area and fourth in term of production after rice, potato and sugarcane. Maize is the most important cereals crop of hill and mid hills of Nepal. It is grown single as well as mixed cropping with millets or legumes or potato. Maize crop in hill is grown as rainfed farming. Generally, farmer of such region does not apply chemical fertilizer but they fertilize the land with organic manures in three seasons viz., rainy, winter and spring season. In rainy season it grown in upland while in spring season in low land. The winter maize is grown in Terai and inner Terai in low land as well as upland.

1.    Kernel type: Dent, Flint, Floury, Waxy, Sweet and Pop corn 
        •    Dent corn (Zea mays indentata Staurt.)
        •    Flint corn (Zea mays indurate Staurt.)
        •    Pop corn (Zea mays everta Staurt.)
        •    Sweet corn (Zea mays saccharata Staurt.)
        •    Flour/soft corn (Zea mays amylacea Staurt.)
        •    Waxy corn (Zea mays ceatina Kulesh)

Maize is a tall, determinate annual C₄ plant varying in height from (1-4) meters producing large, narrow, opposing leaves (about a tenth as wide as they are long), borne alternately along the length of a solid stem. The botanical features of various plant parts are as follows: 

Root

Root system of maize consists of seminal roots, crown or coronal or adventitious or fibrous roots and brace, pop or aerial roots. Seminal roots - which develop from radical and persist for long period. Crown roots developing from the lower nodes of stem below ground level which are the effective and active roots of plant and.  Brace or prop roots, produced by lower two nodes. The roots grow very rapidly and almost equally outwards and downwards. Favorable soils may allow corn root growth up to 60 cm laterally and in depth.

Progeny test

Progeny trials involve large numbers of progenies of a family type, such as full-sib, half-sib, or S1 lines. The progenies are evaluated to identify those that may be used to generate synthetic or experimental varieties, or recombined to form an improved population in a recurrent selection program. Progenies in the trials are normally a random sample from the particular population under study. Therefore, data obtained from progeny trials may be used to estimate genetic variances and covariances from which heritability estimates, predicted responses to selection, genetic correlation coefficients, and correlated responses to selection may be obtained. Progeny trials are normally researcher-managed. Progeny trials involve complex field designs, such as balanced incomplete block, lattice, and alpha-lattice. Some examples of lattice are 11 × 11 for 121 progenies, 14 ×14, 16 × 16, etc. Because of the large number of entries, single-row plots with only 2–3 replications in a few environments are used in progeny trials.

Introduction
Project title:
Objective (S):

Driftwood is wood that has been washed onto a shore or beach of a sea or river by the action of winds, tides, waves or man. It is a form of marine debris or tide wrack.

In some waterfront areas, driftwood is a major nuisance. However, the driftwood provides shelter and food for birds, fish and other aquatic species as it floats in the ocean. Gribbles, shipworm sand bacteria decompose the wood and gradually turn it into nutrients that are reintroduced to the food web. Sometimes, the partially decomposed wood washes ashore, where it also shelters birds, plants, and other species. Driftwood can become the foundation for sand dunes.

The ultimate success of commercial propagation depends on the capacity to transfer plants out of culture on a huge range, at low cost and with high survival rates. The plants multiplied in vitro are exposed to a unique set of growth conditions (high levels of inorganic and organic nutrients, growth regulators, sucrose as carbon source, high humidity, low light, poor gaseous exchange) which may support rapid growth and multiplication but also induce structural and physiological abnormalities in the plants, rendering them unfit for survival under in vivo conditions. Poor control of water loss and heterotrophic mode of nutrition are main cause of deficient growth of in vitro plants.  Hence, gradual acclimatization is necessary for these plants to survive transition from culture to the greenhouse or field. During acclimatization the in vitro formed leaves do not recover but the plant develops normal leaves and functional roots. Once roots are well formed the plants are ready to be transferred into soil.The procedure of acclimatization of regenerated plantlets are: 

LAB constitutes a group of gram positive bacteria. They are nonsporulating, nonrespiring but aerotolerant cocci or rods, which produce lactic acid as one of the main fermentation products of carbohydrates, they do not have cytochromes. They belong to the phylum Firmicuttes, class Bacilli and order Lactobacillaceae. The group includes several genera such as Lactobacillus, Lactococcus, Bifidobacterium, Pediococcus, Enterobacter, Corynebacterium, Streptococcus, Leuconostoc etc.

What new research is needed, what trials and how will the ultimate consumer and Industry benefit?
 
In Brazil, the sales of functional foods amounts to US $ 500 million per year representing about 1% of the total sale of the Brazilian food processing industry. According to a report the interests are mainly for dairy products, nutraceuticals and soy-based products. ABIA forecasts a substantial growth of 4.5-5% for this segment of the market (Stanton et al., 2001). In order to exert the health benefits beyond inherent basic nutrition, it is necessary that the activity of the probiotic culture should be maintained at very high levels during the shelf life of the product.

Plant nutrients are naturally components of the soil orchestrated by weathering processes and that the abundance of these metals in our soil environment now-a-days is due to numerous anthropogenic activities. In the environment, heavy metals are partitioned among the various environmental compartments such as water, soil, suspended solids and biota. Processes such as dilution, dispersion, sedimentation, adsorption and desorption govern their distribution. They also exist in colloidal ionic particulate and dissolved phases,  have a high affinity for humic acids, organic colloids and oxides coated with organic matter. The soluble forms are generally ions or unionised organo metallic chelates or complexes. The solubility of metals in soil and groundwater is predominantly controlled by pH, amount of metal, cation exchange capacity, organic carbon content, the oxidation state of the mineral components and the redox potential of the system.

The requirement of micronutrients is always in low amounts while their moderate decrease causes the deficiency symptoms and a moderate increase causes toxicity. In other words, there is a narrow range of concentration at which the elements are optimum. Any mineral ion concentration in tissues that reduces the dry weight of tissues by about 10 per cent is considered toxic. Such critical concentrations vary widely among different micronutrients. The toxicity symptoms are difficult to identify. Toxicity levels for any element also vary for different plants. Many a times, excess of an element may inhibit the uptake of another element.

Toxic elements like Cadmium (Cd), Fluoride (F), heavy metals, radioactive metals are associated with mainly rock phosphates, other organic wastes like sewage sludge and pollutants. Their chemistry is similar to plant nutrients and replace them in their physiology leading to reduced uptake of nutrients, productivity and contaminated food chain.

Visit to a seed processing unit and attending the following questionnaire to know firsthand information on operations of shop floor

Methods in Seed Blending

For good seed blending there are three methods and details of which given as below:

Mechanical damage is inflicted on seeds during harvesting, threshing drying, processing and handling. Injury may occur from any kind of physical abuse. Threshing abuse probably is most serious but, seed conditioning and handling also contribute to seed injury. High temperatures during drying or drying too quick or excessively can cause injury. Susceptibility to mechanical injury increases as the moisture content of the seed decreases. Effect of all individual impacts received by the seed appears to be cumulative in total seed damage. Cereals are largely immune to mechanical injury presumably because of the protective outer structures, the palea and lemma. Large sized legumes are more suscepitable. Small seeds tend to escape injury during harvest and seeds that are spherical tend to suffer less damage than elongated or irregularly shaped ones.

Seed size is an important parameter of seed vigor as it in influences the performance of seed in soil. Seed bulk at harvest contains a wide range of seed sizes but these may not all be of equal value for sowing. Farmers have always realized the necessary of using uniform seeds for good viability to obtain high emergence and growth. This will also help in getting optimum plant population and higher yields.
 
The influence of seed size on seedling vigor and crop productivity has already been proven since the days Hannaford who was considered as father of seed processing. To achieve uniformity in seed size this optimum sieve/screen size is very critical for optimum seed recovery and economical seed yield. Though the screen sizes are standardized for different crops but vary with different varieties. The shop floor should continuously explore and fine tune screen sizes for different varieties.

This practical in continuation of the practical no.10 explore the effects of screen sizes on different varieties. The screen sizes vary not with crops but with varieties also. To know the effect of screen sizes among the varieties we need to take the top and middle screens as standard or as recommended. These methods can be applied to any crop and to different varieties.

The use of seed processing equipments helps in improving the seed quality by inducing uniformity of physical properties of seeds. This help in achieving optimum plant population and desired economic yield. In certain crops like soya bean, standard seed processing may not give desired seed quality because of sensitivity towards moisture. As general practice seed need to be dried to its safe moisture content of 9 before processing. But in case of soya bean lower seed moisture may result higher mechanical damage after standard seed processing. Drier seed are more vulnerable for mechanical damage. In this practical w try to explore the importance of moisture in seed processing and also need of alternative processing equipments like spiral graders to minimize mechanical damage.

Seed is the primary and essential starting point of a wide range of crops, including the majority of vegetables except those vegetative propagated (e.g- potato and sweet potato). Seedling emergence and field stand establishment is one of the problems facing the growers, especially in early planting where adverse conditions are prevailed (low temperature and high soil moisture). Seed germination and seedling emergence are affected by many factors such as: seed genotype, seed quality (seed viability and seed vigor) and the environmental conditions (moisture and temperature) prevailing during seed germination and subsequent seedling emergence, assuming that the seed is not dormant.

Objective

    1.    Design drum priming (2-3 kg and drying unit with house hold or commonly available materials.
    2.    Standardization of time for seed priming for different crops.

Probable drum priming unit components

A] A vertical drum which need to be rotating
B] A motor which will rotate
C] A desktop assembly
D] A simple two way seed drier (Fig not given here)

Mechanical damage in oil seeds like soya bean can be induced at any time during harvesting, handling, conditioning and sowing operations. There is relationship between moisture and mechanical damage. In general the low moisture containing seeds are more prone for mechanical damage than the high moisture containing seeds. In this experiment we look for this relationship by measuring seed quality parameters like germination and leakage (electrical conductivity).

Seed processing efficiency (SPE) is one of the important aspects in seed processing. It will help in measuring the potential of the shop floor. It will also help in standardizing activities like screens and improving physical purity. SPE will help to improve the quality of the seed material and help in utilizing the machines at their optimum capacity. SPE may vary among the different crops and even among the varieties.
 
To quantify SPE we need to pass the test sample (bulk-pre processed) through the target machine and enter the details in a processing register. To quantify the SPE we need to follow these mathematical formulae:

Storage of paddy seed lots after harvesting is one of the crucial aspects of processing shopfloor. Paddy due to increased mechanised harvesting may loose vital seed quality parameters. Since seed growers cannot buy a combined harvester themselves-they resort to hiring of this machine. Sometimes in the hurry of completing harvesting they harvest the crop at un-safe moisture content. This un-safe moisture content may go up to 50-60% also. Harvesting of seed crop with high moisture has adverse effect on storability. Ensuring safe seed moisture is very critical especially during rabi-summer seed production cycle. Most of the growers depend on sun drying for reducing the seed moisture. But paddy should not be dried >3% in one cycle. Follow tempering and convection cooling after every cycle and repeat the cycle till seed attains safe moisture content (14%).

Scientific research is always based on observable and measurable facts. This applies to physical as well as humanitarian fields of science. In order to investigate social or psychological phenomenon, most of the times we need quantified information related to the phenomenon under investigation. In order to secure this data, we need one or more method/ means of collecting observable/measurable data.

t is the method of gathering the data by seeing, hearing and then recording the observation on the phenomenon/behavior of the respondent rather than the subjects’ self-reporting of the response.

It is not possible that every respondent is willing to and capable of giving honest and true response. Sometimes, it is practically not possible to make the respondent reveal about personal information, but true research requires true response. When direct stimuli fail to elicit true response, then we must use indirect and extractive methods to elicit the required response indirectly from the respondents, which further can be interpreted in the relevant format. This indirect and ambiguous stimulus based methods are known as projective methods. Projective methods are technique of data collection on the person, value, attitude, emotions and motives etc. by using a highly unstructured and ambiguous stimulus (Wilkening, Wilkening & Wilkening, 1973).

Data collected by using different data collection methods remain meaningless until it is screened, cleaned, coded, analyzed and summarized. Data cleaning and screening mostly come under the purview of statistical logics and techniques hence not dealt with in this practical guide. Since these aspects will be dealt by the statistical experts from the allied statistical wings. Presuming that students are aware about data cleaning and screening, we will proceed further with data coding.