eChapters

60% - Bottlegourd, pumpkin, bittergourd, watermelon

65% - Cotton varieties, bhendi

I. FILL UPS

1. _____ are capable of reducing the age induced damages and restoring the seed vigour by controlling free radical reactions.
2. _____ is the process of soaking the low and medium vigour seeds in water with or without adding chemicals to raise seed moisture and drying back for safe storage of seeds.
3. _____ treatment is similar to the moisture equilibration treatment.

I. FILL UPS

1. RCA stands for _____.
2. Expert standing committee was set up in _____.
3. In _____year, All India Co-ordinated maize improvement programme was started.
4. First maize hybrid was released in the year _____.
5. All India co-ordinated bajra and sorghum improvement programme was started in _____.
6. First sorghum hybrid was released in the year _____.

I. FILL UPS

1. _____ refers to the actual acquisition and selling packed seeds, intermediate storage delivery and sales promotional activities.
2. _____ entails using marketing information for the purpose of planning.
3. _____ is one of the major channel through which bulk of paddy seeds, pulses seeds and oil seeds are marketed in the state.

Change in weather affects growth and development of plants. The extent of these effects depends upon the range or severity of change of weather. It is very much possible to change the weather in relatively small area to reap better harvest. Micro weather modification is defined as, “The manipulation of weather elements at increasing or decreasing the duration, intensity, quality etc., for desired effects at microlevel of crop under investigation”.

The climate near the ground can be managed partly by influencing the moisture status and temperature of the upper soil layers, e.g. by mulching and partly by action above the ground e.g. by shading or use of wind breaks.

GENERAL CHARACTERS

• The majority of the members are saprobic. A few Zygomycetes are weak parasites, attacking plants and animals.
• Most Zygomycetes produce a well developed and branched mycelium, consisting of coenocytic hyphae.
• Cell wall is mainly composed of chitin.
• Motile cells or zoospores are absent.
• Asexual reproduction takes place by non motile sporangiospores called aplanospores.
• Sexual reproduction takes place by gametangial fusion.
• Gametangial fusion results in the production of a thick walled resting spore, called zygospore.

Association of human beings with plants is much older than the dawn of civilization. Use of plants as source of food, cloth and shelter started first for fulfilling basic needs. Aesthetic use by way of growing flowers and ornamental plants came much later. Gradually, it was felt that ornamental plants need to be grown in a systematic manner and that yielded the concept of designing gardens. With the advancement of time, gardening styles metamorphosed in various ways influenced by climatic conditions, geographic locations, rulers and most predominantly by people. At present, plants and gardens are part and parcel of our daily life. The scope of developing gardens is simply enormous, be it home, office, institute, temple, factory, ‘samadhi sthal’ etc. Growing plants and developing gardens are now considered a necessity wherever scope exists.

Planning

• Generally 10% of the total area is left aside for building, roads, paths, tube-well, channels etc.
• Windbreak is very important aspect of orchard planning.
• Windbreak plants are planted in North–Wset direction.
• The market should be vicinity of orcharding site. It reduces transportation.
• The site of orchard should not be a wind or flood prone area.
• The soil should be neutral in reaction (pH 7).
• As per climate adaptability, fruit plants have been classified into three groups; tropical, sub–tropical and temperate types.

Mulching

Definition: It is the practice of covering the soil with loose extraneous matter is known as mulching.

Types of mulching

There are two types of mulching:

1. Organic mulching
2. In–organic mulching
3. Organic mulching: In this mulching the open soil is put under loose cover of straw, hay, crop residue, leaves, saw dust etc.
4. In–organic mulching: In this mulching the open soil is put under plastic, film, metal foil, sand, stone etc.

9.1 How to read a Balance Sheet

We know business is mainly concerned with the financial activities. In order to ascertain the financial status of the business every enterprise prepares certain statements, known as financial statements. Financial statements are mainly prepared for decision making purposes. But the information as is provided in the financial statements is not adequately helpful in drawing a meaningful conclusion. Thus, an effective analysis and interpretation of financial statements is required.

Analysis means establishing a meaningful relationship between various items of the two financial statements with each other in such a way that a conclusion is drawn. By financial statements we mean two statements:

Building and honing up skills for managing any business is an important endeavor. Regardless of whether one is running a small business or a large company individual with good management skills are always essential. The role and structure of the farm business in modern agriculture is changing.

A pesticide is any material intended to prevent, destroy, repel, or mitigate any pest, which is defined as a living organism that occurs where it is not wanted or that causes damage to crops, humans, or other animals. There are many different types of pesticides, each is meant to be effective against specific pests. The term “-cide” comes from the Latin word “to kill.”

A pesticide may be referred to by several different names, which can cause confusion. The same pesticide may be referred to by a number of different names, or different pesticides may have similar names.

When two or more chemicals can be used in combination or mixed safely, they are said to be compatible. These combinations can be a pesticide mixed with another non-pesticide chemical, or can be two or more pesticides that are combined in the same tank mix. The reasons for combining pesticides are:

1.To control different types of pests with a single application. Often, several types of pests need to be controlled at the same time. It is generally more economical to combine the pesticides needed and make a single application.

2.To provide superior control than that obtained from one pesticide. Applicators at times combine active pesticides to kill a pest that has not been effectively controlled by either chemical alone. Many combinations are quite effective, but in most cases it is not known if the improved control is a result of an additive effect or a synergistic action of the combined chemicals on different segments of the pest population. One should always check the label prior to verify the safety and legality of mixing pesticides.

3.To increase the effectiveness of one of the chemicals. As mentioned above, this is called synergism. The material added to increase the effectiveness of the primary chemical is called a synergist. The synergist may not necessarily be pesticidal by itself, but increases the effectiveness of the pesticide with which it is combined.

The label on the pesticide container is the principal source of information about a product. The label has all the fundamental information that is required. If you need information about a pesticide, do not rely on memory as it is very easy to make a mistake. Read the label every time before using a pesticide. The lay-out of the pesticide label varies between countries. However, every label on a pesticide container from a reputable manufacturer or source will have the following information:

At times a pesticide application fails to reduce the levels of a pest. Usually, the farmer blames either the pesticide for this or he thinks that the pests have developed resistance. Though, the usual causes of poor results with an application of a genuine pesticide from a reputable source are:

Pesticide poisoning occurs when a pesticide enters the body and interferes with the vital systems of the body. Symptoms can begin anything from 1/2 hour to 24 hours after exposure. The typical symptoms and signs of pesticide poisoning are:

Pesticides can cause three types of harmful effects – Acute, Delayed and Allergic.

Acute effects: Are those that occur immediately after the exposure, within minutes or hours.

Environmental protection Agency (EPA)has established category of pesticides called “Reduced Risk” pesticides to encourage the development, registration and use of products which could result in reduced risks to human health and the environment. New Generation pesticides are considered for “Reduced Risk” status if they have at least one or more of the following status: low risk to human health, low toxicity to non target organisms, low potential to contaminate ground water, surface water or other valued environmental resources and have the potential to expand the adoption and effectiveness of IPM.

Antibiotics are substances which are produced by micro-organisms and which act against micro-organisms. It is also defined as secondary metabolites produced by microorganism, which inhibits the growth of another microorganism. Most antibiotics known uptill now are products of actinomycetes and some are from fungi and bacteria. The use of the antibiotics in managing plant diseases, particlulaty the disease caused by bacteria, mycoplasma and ricketsia, is well demonstrated and are thought to be effective means because of their selective action directed towards causal agents not to the infected host. The mode of action of the antibiotics varies depending on site of action which in turn detrmines their specificity towards given target host (Table 12). Some time mixture of antibiotics are in practice in managing the diseases to reduce delay the chances of resistance development against a particular antibiotic by the causal agent. The most useful antibiotic mixture is streptocycline, which contains streptomycin and tetracycline.

Spraying nozzle is a device for emitting spray liquid, breaking it up into small droplets and throwing the droplets away from the nozzle orifice. Different designs of nozzle are used to produce appropriate droplet size spectrum. In order to break the liquid into droplets energy is needed. The spray nozzles therefore are classified as:

Effective application of pesticides depends on many factors. One of the more important is to correctly calculate the amount of material needed. Unless you have the correct amount of pesticide in your tank mix, even a correctly calibrated sprayer can apply the wrong rate.

Manufacturers provide application rate instructions on every pesticide label. Due to the variety of ways in which these recommendations are stated (such as lbs. of active ingredient (a.i.) per acre, lbs. of formulation per 100 gal. of spray, or ozs, of a.i. per 1,000 sq. ft.) it is often necessary to adapt the recommendations to different areas and volumes, or even other units. Sometimes the amount of active ingredient must be converted to the amount of actual product. This process can be very confusing.

Failure in timely diagnosis of diseases and other pests has often been responsible for devastating losses. Reducing crop losses by keeping pests at bay is crucial to food security. Plant clinic is an innovative paradigm which plays a vital role in assuring food security and ushering prosperity by providing timely diagnosis and rendering necessary advice to the growers, gardeners and other stakeholders for managing pest problem in India. Plant clinics are all about plant health. Though the major role of plant clinic lies in diagnostics and advisory, the activities of plant clinic extend beyond plant clinic, with emphasis on extension, working more closely with farmers and organizations involved in promoting food production. The role of plant clinics beyond diagnostics and advisory. These are:

Preservation methods are generally believed to be responsible for a depletion of naturally occurring antioxidants in food. Processed fruit and vegetables are expected to have a lower health protecting capacity than fresh ones. This is because, up to now, only selected and barely stable antioxidants of nutritional interest (e.g. ascorbic acid) have been commonly assessed as indicators of processing damage. On the basis of these supposed negative effects, in the past few years, the main tool for minimizing eventual processing damage was the strategy of ‘reconstitution’, achieved by the addition or the enrichment of the product with natural antioxidants.

It is well known that food processing can have many effects not all of which result in a loss of quality and health properties. Blanching also represents a useful tool in preventing enzymatic oxidations, which are the main cause of loss in naturally occurring antioxidants in raw material of plant origin. In fact, fruit and vegetables subjected to blanching retain most of their original antioxidant properties.

Lycopene appears to be a relatively stable compound during food processing but it has been reported that heating tomato pulp to produce paste, ketchup, juice and other products, can cause degradation of lycopene and other carotenoids. Other antioxidants naturally present in tomato, such as vitamin C, vitamin E, polyphenolic flavonoids and non-lycopene carotenoids, may play a role in preventing the degradation of lycopene. Thermal processes might break down cell walls and weaken the bonding forces between lycopene and the tissue matrix. Such disruptions in the cell wall fraction may enhance the release of phytochemicals from the matrix. This may make lycopene more accessible or more stable and thus increase the nutritional quality and antioxidant activity of product. An increase in carotenoids by thermal processing has also been attributed to enzymatic degradation which causes weakening in protein-carotenoid aggregates. Destruction of vitamin C is destroyed mainly due to oxidation reactions and the heat applied in the presence of air. The degree of loss of ascorbic acid is closely correlated to the drying temperature used for the production of the end product. The increase in the amounts of some phenolic substances having antioxidant activity was associated with two concomitant events: firstly, the thermally induced extraction of antioxidant molecules previously complexed or polymerized and secondly, the retention of active compounds caused by the inactivation of the enzymes involved in their catabolism.

Problem- Prepare a layout plan for establishing on ideal mango orchard near Varanasi city in 2ha area under high density planting. Calculate the number of plants needed for planting and amount of DAP and sulphate of potash heeded or planting. Also mention the name of cultivars for this region under HDP (200:100:200 NPK g/plant)

Purpose: It is important that the plants occupy the same position where the pegs were placed in the field. At the time of planting the tree the peg is removed first followed by pit making to receive the plant. The plant may be with the ball of earth or without the ball of earth. While planting the tree in the pit there is every possibility that plant may not occupy the same position where the pegs were originally placed. In order to overcome this problem planting board is used. Use of a planting board ensures the planting of the plant in the correct position.

Materials and equipments: Spade, khurpi, planting board, wooden pegs and chain.

Purpose: In propagation of fruit plants by any vegetative methods such as cuttings, budding and in to the selection of ‘mother plants” and “bud-wood”. Use of bud-wood or any other propagation material from high yielding, true to-type, disease free trees (mother plant) will ensure uniform behaviour of trees in the orchard. If possible, propagation material from a single source is used.

Bud-wood used for budding purpose from high yielding, true-to-type and disease free trees certified for the above character by a certifying agency is referred as ‘certified bud’

Procedure: By adopting the flow sheet given below, clean scion from healthy, productive plants, can be selected for vegetative propagation.

Problem-Recommended dose of N:P:K for bearing mango tree 1.0 Kg N: 0.87 Kg P and 1.66 Kg K annually per plant. Available fertilizers are urea, DAP and MOP for supplying of NPK respectively.

So, for an orchard of 1 hectare area, the total number of plants is 100 if spacing is 10m x 10m

Veneer grafting

It has one striking advantage in using the detached scion sticks for propagation, i.e. the shoot of the mother plant which is to be multiplied can be cut away from the mother plant and taken to the seedling growing in the nursery for grafting. Proper selection of scion is very important for the success of this method. The scion stick ought to be 3 to 4 months old and with some activated bud, either auxiliary or terminal. This is secured by defoliating the scion shoot about a week before the actual operation

This method can be practiced on seedling stocks grown in pots or nursery beds. A slanting cut about 5cm long on one side of scion stock, is given and the bark along with wood is removed, giving an oblique cut. Now a slanting cut on one side of the scion is made, which will just fit with the notch of the stock. The scion is then placed in position in such a way that the cambium rings of both stock and scion come in close contact. It is then wrapped tightly with 1.5cm wide tape of 200-300 gauge alkathene film keeping the terminal ends free. When the scion begins to grow at the top, (after about 3 weeks) the upper part of the stock is removed, thus forcing the buds to grow more rapidly. The plastic wrap is removed after 2-3 months.

The success is more or less the same in the entire scion (2.5 to 10.50 cm in length) but the growth of scion is always more when bigger scions are used.

The following special terms are used in grape cultivation:

1. Training: Consists chiefly in giving a shape to the vine to the various forms of support.
2. Pruning: Consists in removing canes, shoots, leaves diseased, unproductive and other vegetative parts of the vine.
3. Thinning: Thinning is the removal of flower cluster, immature fruit cluster or parts of cluster.
4. Shoots: Shoots are the current season’s top vegetative (succulent) growth arising from a bud after pruning.
5. Canes: Canes are the woody matured shoots.

In tomato seed extraction is the very important operation. Tomato seed can be extracted by following way.

1. Fermentation methods: Red ripe fruits should be picked and crushed in non metallic pots. Profuse foam formation indicates that fermentation is completed. Fermentation of seed material should not be prolonged beyond 72hr to get seed of high germination. Preferably the seed should be washed free of pulp after 48hr require temperature uses.
2. Acid treatment methods: In case of urgency seed may be washed by using 1.0 to 1.5 liters of 35 to 38% concentrated HCL/g tomato fruit pulp. Fermentation is completed in about 30 minutes. Clean seed are obtained by stirring and washing procedure are quickly as possible.
3. Alkali treatment methods: In case Alkalie 10% sodium bicarbonate is mixed in equal volume of pulp or 300 g washing soda dissolve in 4 liter of boiling water is sufficient for 4 liter fruit pulp.
4. Mechanical methods: It is used for large scale operations put the ripe fruits into the mechanical seed extractor for crushing and separation of the seed and gel from the pulp. By acid 0.8% solution of acetic acid for 24hr at or below 21⁰C (1kg seed/10 liter of acetic acid).

Purpose- One of the important operation for horticulture crops is raising of seedlings (vegetable, fruit trees, shrubs and flowering annuals). Seedlings are either directly planted as in the case of some vegetables, flowering annuals, shrubs and trees or may used as root stock as in the case of mango, citrus etc. For healthy and good stand of seedlings proper preparation of nursery beds is essential. Since large number of seedlings are raised in a consideration. The protection of seedlings from pest, diseases, strong sun and wind is very important. These factor will vary if seedlings are raised under Low Tunnel Polyhouse.

Restricted pesticides for use

1. Aluminium phosphide Captafol
2. Carbaryl
3. Dieldrin
4. Methyl bromide
5. Ethylene dibromide (EDB)
6. Sodium cyanide
7. Lindane
8. Methyl parathion
9. Monocrotophos
10. Chlorbenzilate

Purpose: This test is conducted to determine the boldness and soundness of the seeds. The weight of a given number of seeds of different varieties or kinds will vary. This variation is due to boldness and soundness of the seeds. The seeds will vary according to the soil fertility, variety and other environmental conditions. Higher the weight of a variety per thousand seeds, better is the variety for cultivation.

Materials and equipments: Scale, balance and seeds.

Improved production technology is an integral part of hybrid seed production technology, which is a very high venture practice. This is because like several factors (climate, availability of parental lines and technical labour etc), success of hybrid seed production also depends on the success of crop management in the hybrid seed production field

A. Concentrated Organic Manures

Problem- Calculate the amount of farm yard manure, urea, single super phosphate and murate of potash for one hectare tomato crop which require 100, 60, 60 kg ha N, P, K respectively. 1/3 quantity of nitrogen should be given through farm yard manure and rest through chemical fertilizers