eChapters

Introduction

The basic components of diet include carbohydrate, protein, fat, vitamins and minerals. Vitamins are the essential nutrients which are not formed in our body and required in minute amount from the diet. Vitamins are crucial for the optimal functions of several enzymes; thus important for optimal growth and development. Vitamins perform various functions that help in regulation of metabolism, prevent chronic diseases, maintain natural appetite, mental health and immunity.

In 1912, Polish biochemist Kazimierz Funk coined the term ‘vitamine’;a substance that was present in rice polishing and foods that cured polyneuritis in birds and beriberi in humans. The name is from ‘vit’ for vital nutrient and ‘amine’ for its similarity as an amine. Vital signify that these factors are indispensable for life. Earlier they are identified and thought to contain amino groups, thus the word amine was used, which was true for thiamine but later work revealed that most of the vitamins do not have amino groups. Thus the word was shortened to vitamin in English. It should be noted that the term vitamin does not denote to some othern utrients such as essential amino acids, essential fatty acids, dietary minerals or other nutrients that contribute towards good health.

Vitamins may be defined as organic compound needed in minute amount through diet to perform specific biological functions for normal growth and health of the organisms.Vitamins should have following characteristics:

Introduction

The dairy sector is one of the most important food sectors, which introduced the physical, chemical, microbiological and sensorial criteria duringprocessing steps and in the final dairy products. Several agents/ingredients of non-dairy origin are commonly used to maintain the quality of milk and milk products during processing, transportation and storage. In general, such ingredients are known as food additives and it can be antioxidants, coloring agents, flavoring compounds, preservatives(naturals and synthetic),artificialsweeteners, vitamins, minerals, stabilizers, emulsifiers and curing agents. From the safety point of view, some toxic agents can come into contact of dairy products duringmilking, storage or processing; such as fungal toxins, heavy metals, antibiotics or radionuclide’s, etc., which need to be identified and processed accordingly. Although addition of food additives in food/dairy product is controlled under country specific food laws or Codex Alimentarius Commission (CAC), few dairyproducts such as butter and unflavored fermented milk products are highly restricted for food additives.

Progress of any nation is driven by human curiosity and ingenuity. Engineering is one profession that has shown humanity the ways to meet its needs. It made the forces of nature work for the good of mankind. The biggest challenge for engineering profession has been its integration with the human needs. Engineering transforms technical conscience into applied realities. On the one hand, engineers are not limited by technology, and on the other, they are worried about the risks to the environment, health, sustenance and safety.

Engineer is a composite; “He is not a scientist, he is not a mathematician, he is not a sociologist or a writer; but he may use the knowledge and techniques of any or all of these disciplines in solving engineering problems.” Engineering in the broadest sense, relates to the “development, acquisition and application of technical, scientific and mathematical knowledge about the understanding, design, development, invention, innovation and use of materials, machines, structures, systems and processes for specific purposes.” Engineer works under various constraints: nature, cost, safety, environment, ergonomics, reliability, manufacturability and maintainability, among others.

This is how Neil Armstrong described himself, “I am, and ever will be, a white- socks, pocket-protector, nerdy engineer — born under the second law of thermodynamics, steeped in the steam tables, in love with free-body diagrams, transformed by Laplace, and propelled by compressible flow.”

Asia-Pacific Association of Agricultural Research Institutions (APAARI) Maliwan Mansion, 39 Phra Atit Road, Phra Nakorn, Bangkok 10200, Thailand

Selected ICT-enabled Agricultural Development Initiatives

• International Initiatives
• National Initiatives

Success Stories on Agricultural Information Systems

• South Korea’s Agricultural Information Service – A NARS Initiative
• ITC’s e-Choupal – A Private Sector Initiative

Lessons Learned on Secrets of Success

Extent of Adoption of Technology

Benefits and Impact at National and Regional Levels

Audio-visual aids may be defined as any device used to aid in the communication of an idea. An audiovisual product is any audiovisual item such as still photography, motion picture, audio or video tape, slide or film strip, that is prepared singly or in combination to communicate information or to elicit a desired audience response. Even though early aids such as maps and drawings are still in use, advances in the audiovisual field have opened up new methods of presenting these aids, such as videotapes and other equipments which allow more professional and entertaining presentations to be presented.

Such aids assist the teacher in communicating information among the learners leading to change in skills, attitudes, knowledge, understanding and appreciation. These aids stimulates the sensory organs like ears, eyes, etc and facilitates quick understanding of the message by the audience. The effective use of these aids depends upon the skillful and imaginative approach of the teacher. Hence, it is necessary that extension worker should know what type of aids will be more suitable for a particular teaching objective. These aids may be used for both literate as well as illiterate people.

The instructional devices through which the messages can only be heard are known as Audio Aids. The instructional devices through which the message can only be seen are known as Visual Aids. The instructional devices through which the message can both be heard and seen simultaneously are known as audio-visual aids.

Origin and Domestication of Pigs

Pigs are nonruminant, even-toed ungulates and belong to suborder Suina which includes hippopotamuses, peccaries and pigs. All true pigs are members of the family Suidae which includes five living genera namely Sus, Babirousa (babyrusa), Hylochoerus (giant forest hog), Phacochoerus (warthog), and Potamochoerus (bushpig and red river hog) that can be called as pigs. European breeds are believed to be descendants of the European wild pig Sus scrofa and Asiatic or oriental breeds originated from the Eastern Asiatic banded pig, Sus vittatus a successor of Sus crystatus.

The biotic component of earth is continuously and significantly affected by the abiotic components. Physical factors of the environment (temperature, humidity, rainfall, wind, solar radiation, light, atmospheric pressure, etc) surrounding the animal have influence on the production, reproduction and welfare of the animal. Livestock performance is best when environmental factors are optimum which is difficult to achieve due its variable nature. To this complex livestock-climate interaction, animal responds favorably by undergoing ‘adaptation’ or unfavorably by being under ‘stress’. Type and magnitude of stress due to physical environment depends on climatic factors of a particular area, animal adaptability, breed characteristics and managemental interventions by humans to minimize the losses. To understand the physical environment of livestock frequently used terms are mentioned below

Abstract

Potato in India was introduced as a long day temperate crop which found suitable climate in the higher hills of the country. Since then it is grown widely in the Indo-Gangetic Plains, the Plateau and the Himalayan regions in north and the Nilgiris hills in south of India. The Central Potato Research Institute (CPRI), Shimla has developed 49 potato varieties by the conventional breeding for suitable cultivation of potato in different potato zones of India. A number of technologies for ware- and quality seed- potato production, storage and processing have been developed/standardized for adoption by the end users. These technologies have contributed immensely towards multiple increase in area, production and productivity of potato during last sixty years. Apart from conventional tools, modern biotechnological tools like whole genome sequencing technology, transgenics technology, molecular markers, RNAi and microarray technology have are also being employed in potato improvement.

1.    Diffusivity of gases at atmospheric pressure is

(a) < 1 cm²/s

(b) >1 cm²/s

(c) > 10 cm²/s

(d) > 100 cm²/s

2.    Diffusivity of liquids is of the order of

(a) 0.1 cm²/s

(b) 10 cm²/s

(c) 100 cm²/s (d) 1 x 10^-5 cm²/s

Agricultural food production is increased by adopting scientific farming methods and another way to increase the availability of food is preventing the food spoilage by adopting food preservation methods. The global agricultural and fish production accounts for 50% of perishable food, which requires preservation. Only half of the perishable foods are properly protected. Application of innovative technologies to promote the production of food is indispensable to meet the demand of emerging populations. It is equally important to protect the stored food from the invasion of pests and diseases. A food saved is a food produced.

Food Processing and Preservation, branch of manufacturing that transforms raw animal, vegetable, or marine materials into tasty, nutritious, and safe food products. The industry has its roots in ancient times, as humans have always needed to obtain food and store a portion for later use. Prehistoric humans may have dried fruits in the sun and stored meat in cold areas, such as ice caves. The modern food processing and preservation industry was born in 1809, when French chef and inventor Nicolas Appert, searching for a better way to provide food for Napoleon’s army, devised a method for sterilizing food in tightly sealed glass bottles.

Today a wide variety of methods are available to maintain and enhance the appearance and taste of food. Food processing and preservation methods also create products that are convenient for consumers, such as products that are ready to eat or require minimal preparation and cooking. Combining these methods with modern distribution networks makes seasonal crops available year-round in grocery stores all over the world.

Key words : Participatory GIS (P-GIS), Geo-Participatory Rural Appraisal (Geo-PRA) Social Mapping, Resource Mapping, Seasonality Maps, DGPS.

Participatory GIS

Geographical information System (GIS0 and Geographics Information Technologies (GITS) are no more restricted to the elite group of the society. Planners are busy in searching ways in merging community participation with GIS in the context of urban planning, environment equity, sustainable development etc. (Aitken and Michael, 1995, Craig and Ehwood, 1998; Talen, 2000 and Sieber, 2000). In all the cases, common thing is the linking of community participation and GIS in a diversity of social and environmental contexts. Through development, demonstration and modification of methodologies by academics and practitioners the concept of Participatory GIS (P-GIS) emerges. It is an outcome of a spontaneous fusion of participatory forms of development planning with modern information technologies. Experts gave considerable thoughts on the probing questions like whether a bottom up GIS could be successfully developed, how many community participation could be incorporated into GIS and to what context such participation would serve only to legitimize conventional top-down decision making. From these reflections only the concept of people’s participation GIS arose.

Surface Water Resources

Surface water is a general term describing any water body which is found flowing or standing on the surface, such as streams, rivers, ponds, lakes and reservoirs. Surface water originates from various combinations of sources:

1. Direct precipitation - rainfall which falls directly in the surface water body;
2. Surface runoff - rainfall which has fallen onto the surrounding land and that flows directly over the surface into the water body;
3. Interflow - excess soil moisture which is constantly draining into water body; and
4. Water table discharge - where there is an aquifer below the water body and the water table is high enough, the water will discharge directly from the aquifer into the water body.

The quality and quantity of surface water depends on a combination of climate and geological factors. The recent pattern of rainfall, for example, is important in enclosed water bodies such as lakes and reservoirs where water is collected over a long period and stored. The water storage in streams and rivers is in a constant stage of movement and depend on the weather conditions.

Geomorphometric analysis is the measurement of the threedimensional geometry of landforms and has traditionally been applied to watersheds, drainages, hill slopes, beaches, and other groupings of terrain features. In particular basin morphometric parameters have received a lot of attention from hydrologists and geomorphologists since watersheds (catchments) have been used for analysis of various physical ecosystem processes, including soil erosion, deposition, runoff, stream discharge, sediment yield, sedimentation of streams, irradiation by sunlight, evaporation, evapotranspiration, and nutrient distribution. The study of morphometric parameters, which include variables such as average basin slope, the basin elongation ratio, compactness ratio, basin relief and stream density. Some parameters, such as slope length or stream sinuosity, can be used to represent both basin and hill slope, or basin and stream channel properties.

The main task before geomorphologists is to use an ideal unit of the earth surface for the study of its landforms. The search for an ideal areal unit, within which the collection, processing, organization and interpretation of the data of the geometry of landform, particularly of erosional origin can be made has been the main aim of the geomorphologists right from Fennemen (1914), Horton (1932 and 1945), Strahler (1956 and 1957), Miller (1953), Chorley (1957), Schumm (1956), Shreve (1966), Singh (1981), Sarkar (1995), Schumm and Spitz (1996), Sharma and Amin (1996), Iqbaluddin et al (1997) and Raj et al (1999).

INTRODUCTION

Nowadays, any issue related to “information and communication technologies in agriculture (ICTs)” is extremely interesting and it belongs to the modern subject-matters of the agricultural economics science. Unambiguously the above phrase is the buzz remark for the agricultural extension scientists considering that the process of communication is fundamental to extension, training and passing on information. Thus, learning processes, dissemination of innovations and social change cannot be explained without reference to communication (Albrecht et al., 1989).

An efficient communication strategy, especially when combined with a wide range of available ICTs, utilises the advantages of both personal and impersonal media communication. This can be achieved by building up, promoting and using communication networks and modern technologies. Under the term “network” we understand the complex of communication channels which ensure that all members of the target group receive the message more than once, both from various personal contacts and media. This calls for the use of existing communication relationships, the dissemination of information by multipliers and influential individuals and a range of media which are appropriate to the type of information and for reaching the target groups. As well thought out, communicative approach can partly compensate for the often lamented shortage of advisers provided that one is in a position to communicate a message in various ways, to evaluate feedback and then to take action accordingly.

1. The Fraction of incident radiation which is reflected back is called as.................

   a) Short wave radiation

   b) Long wave radiation

   c) Albedo

   d) U.V radiation

2. Hulling percent in Rice crop.........

   a) 60-70%

   b) 40-50%

   c) 80-90%

   d) 20-25%

2.1 Introduction

Many complicated engineering principles are to be analyzed and applied, before any food processing operations takes shape of a commercially viable enterprise. The size and type of the required equipments have to be specified and their sequences have to be arranged. Further, the process analysis consists of understanding of material and energy balances. This chapter provides the application of steady state conservation of mass and energy equations to analyze food-processing operations.

4.1 Introduction

The food preservation may be define as the state in which the food may retained over a period of time without being contaminated by pathogenic organism or chemicals and without losing its colour, texture, flavour and nutritional value. All the methods of food preservation must provide such an environment in and around the preserved food so that it produces one or more unfavourable conditions to the continued activity of the spoilage agents. The various methods used for food preservations are:

5.1 Introduction

The medium used in various unit operations of food process engineering such as heating, cooling, drying, mixing and transport processes, is moist air, which is a mixture of two substances. One of these is dry air which itself is a mixture of number of gases and the other is water vapour which may exist in a saturated or superheated state. The properties of moist air are called psychrometric properties and the subject, which involves determination of thermodynamic properties of moist air, is known as psychrometry. Thus, psychrometry is that branch of engineering science, which deals with the study of moist air i.e. dry air mixed with water vapour or humidity. Knowledge of properties of moist air is imperative in design of systems such as air- conditioning equipment for storage of fresh produce, dryers for drying of cereal grains, and cooling towers in food processing plants. In this chapter, important thermodynamic properties used in psychrometric computations are defined. Psychrometric charts useful in determining such properties are presented. In addition, various psychrometric process used in food process engineering are discussed.

Cacti and succulents are two important groups of ornamentals both for indoor plantscape and outdoor gardening. Unlike other ornamental plants, these have not been fully exploited for landscaping purpose. Careful selection and proper maintenance are the key factors for successful culture of cacti and succulents. There is lot of variation in growth habit, flowering and hardiness which make them enable for outdoor landscape as well as pot plant.

Being little uncommon in shape, size, growth habit in comparison to other ornamentals, cacti and succulents are good addition to create curiosity in the gardens. Every kind of garden has got some spots difficult to develop properly by other common ornamental plants. Selected cacti and succulents in combination with stones / boulders can make such corners presentable and attractive. Moreover, flowers of cacti and succulents are very colourful and attractive deserving to find place in all types of garden. Foliage of some of the succulents like Agave, Kalanchoe, Dudleya, Furcraea, Sanseveria are remarkable and added attraction in potted form for interior decoration. Landscape designers and horticulturists should make use of these potential groups in extensive way.

16.1 Balance and Weighing

16.1.1 Principle of Functioning of a Balance

It is one of the important tools used in the laboratory and one should have thorough knowledge aboutitsassembly, use and care,otherwise it may be the initialstep for introducing error in any physical or chemical analysis. Every balancehas its maximum load limit and sensitivity depending upon its construction.

Essentially balance may be regarded as a rigid beam, BC having a central fulcrum, O and two arms of equal length, d₁, d₂ (Fig.16.1). Theboth ends of beam have prism edges upon which the balance pans are suspendedby means of suitable suspension.

Weather is the integrated effect of the atmospheric conditions at any given instant. Climate is the collective state of the atmosphere at any given place or over an area within a specified period of time (usually over 30 years? period).The branch of meteorology that deals with the science of climate is known as Climatology. Primarly the elements of climate are sunshine (solar energy), temperature, moisture and winds. Climate elements vary regionally and temporally. The most fundamental control of weather and climate is the unequal heating and cooling of the atmosphere in different parts of the earth. The zone of maximum solar radiation shifts northward and southward during the year, thereby producing seasons. When it is summer in the Northern Hemisphere it is winter in the Southern Hemisphere and vice-versa. Broadly speaking, both the hemispheres have two distinct seasonal climates in a year namely, the summer or comparatively hot climate and the winter or the cold climate. The atmospheric circulation patterns over the two hemispheres also undergo changes during these two distinct seasons. The change is phenomenal in the tropical regions. In the summer monsoon region, there is reversal of wind flow in the lower troposhere, sudden increase of precipitation etc. Besides the change in the general circulation pattern with the season, the climate of a place is affected by variety of local features such as vegetation, nature of the surface, the slope of the land etc. On the basis of climate, the period of a year has been divided into four seasons in India. They are:

Cold weather season (Winter season) – December and January; Pre-monsoon or Hot weather season – March to May; Southwest or Summer Monsoon season – June to September and Post-monsoon season - October to December. Each of these seasons has its own characteristic features of pressure and temperature distributions, winds, precipitation, humidity etc. The major synoptic disturbances in the Indian region also differ with the season.

13.1 Introduction

A surfactant or surface-active agents are the compounds that lower the surface tension between the two liquids or between a liquid and a solid. Surfactants may act as detergents, wetting agents, emulsifiers, foaming agents and dispersants. Surfactants are normally organic compounds that are amphiphilic, meaning they contain both hydrophobic groups or hydrophilic groups. Therefore a surfactant contains both a water insoluble component and a water soluble component. Surfactant will diffuse in water and adsorb at interfaces.

The interfacial free energy is the minimum amount of work required to create that interface and the interfacial tension between two phases is determined as the interfacial free energy per unit area. The interfacial (or surface) tension is also a measure of the variance in nature of the two phases meeting at the interface (or surface). The greater the dissimilarity in their natures, the greater the interfacial (or surface) tension between them. A surfactant is therefore a substance that changes the amount of work required to expand those interfaces. Surfactants usually act to reduce interfacial free energy.

Surface active agents in the form of emulsifiers have a long history of use and are widely used in many products being used in everyday life. An extensive basic research is required to understand the reason of instability and methods to prevent the breakdown of emulsions. Emulsifiers can function as dough conditioners by improving tolerance to variations in flour quality, better gas retention resulting in lesser yeast requirements, increased uniformity in cell size, a finer grain, more resilient texture and improved slicing. Also, the characteristics of freshly baked bread like soft crumb can be retained longer, if the appropriate emulsifiers are added. Commonly used surface active agents in bread production are propylene glycol mono- and diesters, polyoxyethylene sorbitan monostearate, ethoxylated mono- and diglycerides, succinylated monoglycerides and Diacetyl tartaric acid, esters of monoglycerides. Cookie characteristics like top grain, volume and spread ratio can also be improved. Here surfactants used are sodium stearoyl fumarate, sucrose fatty acid esters, sodium stearoyl lactylate, sorbitan fatty acid esters, polysorbates and ethoxylated monoglycerides. In dairy products like Ice cream surface active agents play some important functions like to improve fat dispersion and control fat agglomeration, facilitation of fat– protein interactions, facilitate air incorporation, give smoother texture due to smaller ice crystals and air cells, increase resistance to shrinkage, improve melt-down and reduce whipping time. In candy products, the elimination of “bloom,’’ i.e., the transition of fat crystals is a key reason for the addition of surface active agents. In mixtures of triglycerides, surfactants like sorbitan esters (Spans) and ethoxylated sorbitan esters (Tweens) can control product viscosity in chocolates and in cream fillings and modify the crystal structure. Surface active agents have been utilized in the production of meat analog products also. In margarine, Emulsifiers fulfil several functions like modification of crystal structure in the vegetable fat, assistance in emulsion formation and antispattering. Here, a mixture of citric acid monoglycerides and monoglycerides or lecithin can be used. The properties and mode of action of these chemical surfactants is discussed in the following sections.

The State of Karnataka is located between 11.50° to 18.50° N latitudes and 74.25° to 78.50° E longitudes and covers an area of 19.1 m ha which accounts for 5.8 percent of the total geographical area (TGA) of the country. Out of the total 19.1 m Ha in Karnataka the net cultivated area (201011) was 10.5 M Ha, net irrigated area 3.49 m Ha and net rainfed cultivated area 7.01 m ha. Karnataka has the largest area under rainfed agriculture (Fig. 8.1). Nearly 55% of total food grain production and 74% of oilseeds production come from rainfed agriculture in Karnataka. Therefore rainfed agriculture plays an important role in total food grain production in the state. Further the rainfed agriculture has substantial untapped potential, which can be brought to use by increasing the crop yields in the dry land areas through the adoption of proper dryland production technologies. The climate of the state is determined mainly by the geographical location with respect to the Sea, monsoon winds and physiography. Karnataka State has subhumid to humid climate on the west coast and western ghats and semiarid to arid (very warm) climate in central and northern districts of plateau region. The year is divided into four seasons viz., winter (December to February), summer (March to May); SouthWest monsoon (June to September) and NorthEast monsoon (October to November). The occurrence of rainfall and its spatial distribution is highly variable and not dependable. Rainfall contribution is very high, from Southwest monsoon season. It is seen that the annual rainfall is highest (5051mm) over the western ghats and lowest (408mm) in the eastern parts of Chitradurga district. Taluk wise annual rainfall variation is increasing over most of the taluks in south interior Karnataka. More than 2/3rd of the state receives less than 750 mm of rainfall. The atmospheric temperature in the state ranges from 23°C to 43°C in summer and 9 °C to 27 °C in winter. Hailstorms are common in plateau region of the state during premonsoon period.

Cities or urban conglomerations are fast developing and where the rate of land availability has infinitesimally small; vertical expansion and taller buildings have emerged and are defining the city skyline. Though this may speak well of the economic development, but the increase in hard paved areas and roads may spell trouble for the environment as urban heat island (UHI) effect. The causes of Urban Heat Island are primarily due to the absorption of solar radiation (Short wave) by building/urban materials that is subsequently re-radiated (long wave) to the surroundings. In addition, heat generated from the use of air- conditioning coupled with the greenhouse effect of pollutants also contribute to the increase in temperature. Such increase in temperature with the presence of air pollutants can result in the accumulation of smog, damages the natural environment and jeopardizes human health. It also costs consumers more money because it takes more energy to cool buildings. Who can forget the regular news of Beijing repeatedly topping the list of most polluted cities and fresh air is available in cans!

Fresh air cans are in no means a firm solution. Plants are atmosphere cleansers, can serve to filter carbon dioxide and other toxins in environment, cool the air by transpiration and also provide cooling shade. Research work shows the benefits of using light colour roofs and roof gardens to minimize the heat gain inside the buildings. This would in turn reduce the energy consumption of air conditioning in buildings. Rooftops, balconies and terraces have often been referred to as the “last urban frontier” of cities, in the sense that they represent the last significant remaining space to be exploited to create a green oasis and an area of relative peace and privacy away from the urban bustle. Given the social, economic and environmental contributions of urban greenery to the quality of life in cities and the realization that cities more often than not lack sufficient greenery, greening of rooftops, balconies and terraces is therefore a logical, effective and high impact way to re-inject the much needed greenery in urban settings thus reinventing the concept of hanging gardens.

ABSTRACT

The genus Aconitum is in the limelight of the current scenario of the pharmacopeia and has became the centre of attention in the field of herbal medicines, as is manifested with various biological and pharmacological cores which make the genus most imperative. For vast decades some species of the genus Aconitum and its derivatives were considered as vizulently fatal but were liquidated as intact drug elites through traditional as well as modern system of medicine. The retrospection of the validated information in account of the genus Aconitum represent a pioneering approach to corroborate the scientific studies on almost everyaspect of the herbal genusAconitum, as a number of species belonging to this genus has been enlisted in the Red Data Book of IUCN which have been renowned for their medicinal benefits in various systems of medicine. The tubers some species of Aconitum contain lethal diterpene alkaloids such as aconitine, mesaconitine, and hypaconitine, which easily can be directed into screened harmless alkaloids such as benzoylaconine, aconine, and pyroaconine by heating or alkaline treatment. Currently, the processed tubers are widely and safely practiced for the remedyof pain, neuronal disorders, inflammation, and rheumatism and have a huge therapeutic index for curing ailments like hysteria, throat infection, dyspepsia, abdominal pain, diabetes and also as a cardiac depressant in massive arterial tension of cardiac origin. An important component extracted from some species of Aconitum, Lycaconitine has been found to be effective against multi-drug resistant cancers. The di-terpenoid alkaloids of aconite source and their increasing demand for the active compounds used in different systems of medicine has led to overharvesting of the tubers, resulting in rapid depletion of the natural stocks of this valuable plant. As a consequence, the genus is now on the list of rare and threatened species. Since the commercial demand of this important medicinal plant is very high and hence needs to be conserved as the species density of this genus has been threatned due to many factors. As such diverse efficient and standardized protocols for its regeneration like micropropagation, somatic embryogenesis and some other conventional efforts like storage of seeds as a means of ex-situ conservation must be attributed on the aspects of conservationof genusAconitum. The exploitation of population genetic diversity will provide useful information for the biological conservation of these esteemed species of Aconitum in the regions . Since a complete revision of the genus Aconitum in the region has not yet been carried out and the high level of endemism and a lack of relevant information of the genus Aconitum have made its various scientific studies a very interesting object. The scientific and systematic information about the genus Aconitum generated demands validation as only a little attention has been done on its various aspects from cultivation, conservation, phytochemistry and pharmacological evaluation to the molecular characterization. Consequently species specific measures are needed and a lot of important attributes has to be assigned to the species of this genus which will ultimately help to ensure simultaneously both conservation as well as sustainability in raw material production of the genus.

1. Introduction

Fungi are ubiquitously present in air, water, soil and organisms, or on organism surfaces. They are a group of eukaryotic system that are of great applied and scientific interest to common man, microbiologists, agriculturists and industrialists. They are a diverse group of organisms with respect to taxonomy, size, morphological appearance, mode of nutrition and reproduction. Fungi are eukaryotic spore bearing protists that lack chlorophyll. Fungi comprise the molds and yeasts. Yeasts are usually unicellular measuring only several microns in diameter, whereas molds are filamentous and multicellular which may grow up to several meters in diameter like the extremely large polypores. Fungi generally reproduce both sexually and asexually (Gow and Gadd 1995).

Although it is not easy to define fungi, biologists currently use the term “Fungus” to include nucleated, spore bearing, achlorophyllous organisms with absorptive nutrition which generally reproduce sexually and asexually, and whose filamentous branched somatic structures are typically surrounded by cell walls containing cellulose of chitin or both. A feature which all fungi have in common is their mode of nutrition. Like animals, fungi are heterotrophic organisms, which must consume preformed organic matter. They may live as saprophyte or parasites. They are of great economic importance to man and play an important role in the disintegration of organic matter and affect us directly by destroying food, fabric, leather and other commercial goods. They are responsible for a large number of diseases of plants, animals and man.

The functional diversity of chemicals within plants is best demonstrated by terpenoids. More than 30,000 terpenoids have been identified, each one composed of 5-carbon (prenyl diphosphate) building blocks added together to make 10-carbon, 15-carbon, and even 2000–500,000-carbon chains, as is the case for rubber. Terpenes are functionally diverse, and many are integral to primary metabolism, e.g., hormones such as gibberellins and abscisic acid, electron carriers such as plastoquinone and ubiquinone, terpene-derived compounds that form structural parts of membranes such as phytosterols, and photosynthetic pigments such as carotenoids.

Plant terpenes are also available as essential oil or ethereal oil. Essential oil is defined as the volatile oil obtained by the steam distillation of plants. There is a distinction between fixed or fatty oils and volatile oils. Their volatility (boiling point) and plant origin are characteristic properties of these oils.

I. INTRODUCTION

The fruits and vegetables we eat and flowers and ornamentals we enjoy are biological entities. They breath, produce heat, perspire, are easily damaged, get diseases and finally die. These carry on processes characteristics of all living things before or after harvest to perform the metabolic activities:

1. to maintain cellular organization
2. to transport metabolites around the tissue and
3. to maintain membrane permeability.

An extraordinary variety of viruses, bacteria, and organisms stand ready to attack us and feed off our bodies’ cells. Using microscopes of varying power, photographers show us a teeming microbial world that we could barely imagine without their help.

Introduction

India accounts for 16.7 per cent of the world’s food consumers. India’s size in terms of food consumers is many times larger than the average size of the rest of the countries, except China. At the time of independence in 1947, India was in the grip of a serious food crisis, which was accentuated by the partition of the country. The demand for food far exceeded supply, food prices were ruling at high levels and more than half of the populations were living below the poverty line with inadequate purchasing power. With high rates of population growth, the dependence on imported food increased further. However, the situation improved considerably after the mid-1960s, when new agricultural development strategy and food policies were adopted in the country. The production of staple cereals increased substantially, mainly contributed by productivity improvements. The dependence on food imports reduced and the country became a marginal net exporter of cereals. There was also an improvement in physical and economic access of households to cereals and other nutritive food products. The proportion of households reporting hunger went down and the incidence of economic poverty was reduced. The objective of this paper is to review the Indian approach to tackling the severe problem of food insecurity, which it faced immediately after independence. It reviews the evolution of food policy, the major policy instruments deployed, intervention in food marketing system, and the current status of food security/insecurity. The paper also identifies the lessons emerging from the experience of India. The paper has been divided into eight sections. The second section briefly presents the evolution of the food policy in India and the approaches to food security. The current status of food security and insecurity is analyzed in section 3. The next three sections detail the three major instruments of the food security policy. Price support policies pursued in the country are described in section 4. Section 5 examines the magnitude of input subsidies in Indian agriculture. Direct food and other assistance programs for improving household food and nutrition security and magnitude of food subsidy are presented in section 6, while some salient features of food marketing system that affect food security are given in section 7. Lessons emerging from the Indian experience are presented in the last section.

Abstract

Anaerobes are a diverse groups of microorganisms which do not require oxygen or energy for respiration/metabolism and are one of the important components of nitrogen cycle. They are capable of using various other organic and even inorganic materials as electron acceptors during respiration. Anaerobic based wastewater treatment is a biological approach where microorganisms degrade organic contaminants (i.e. rich in carbon and nitrogen) in the absence of oxygen. In this chapter, the role of anaerobes in wastewater treatment has been discussed as it offers an alternative, cheap and eco friendly treatment technology among different biological treatment methods. Anaerobic biological treatment of wastewater is well developed, understood, and frequently used in anaerobic digesters to treat complex organic carbon and nitrogen compounds such as primary and secondary wastewater sludge. The anaerobic sludge contains diverse groups of anaerobic microorganisms that work together in association via a multistage processe consisting of the following biochemical reactions like hydrolysis, acidification, acetogenesis, and methanogenesis thereby converting the organic matter to biogas. The composition of biogas includes 70% methane (CH₄) and 30% carbon dioxide (CO₂) in addition to traces of other gases (e.g., H₂ and H₂S). The methane produced as a by-product can be used as an energy source. The potentiality of anaerobes in anaerobic based bioreactors for its maximum efficiency can be implemented in a variety of ways. The chapter discusses about the working principle, performance, treatment potential, and cost implication in the application of anaerobic treatment technology. The main bioprocess parameters such as pH, temperature, mixing, organic loading rate (OLR), and hydraulic retention time (HRT) have also been discussed in brief. Anaerobic treatment offers several benefits over aerobic treatment, including lower energy requirements, less chemicals, low capital, operation, and maintenance costs, and less sludge production. Hence, it saves money and the environment and overall simplifies the whole process.

The R&D thrust in the pharmaceutical sector is focused on development of new drugs, innovative/indigenous processes for known drugs and development of plant based drugs through investigation of leads from the traditional systems of medicine. In addition, many nutraceuticals are being consumed from unregulated markets for their perceived benefits in health care and improvement of quality of life.

Natural pharmaceuticals, nutraceuticals and cosmeceuticals are of great importance as a reservoir of chemical diversity aimed at new drug discovery and can be explored as potential antimicrobial, cardiovascular, immunosuppressive, and anticancer drugs. Around 80% of all such products are of plant origin; their sales exceeded $ 65 billion in 2003. Examples of plant products and derivatives used by the pharmaceutical industry include Paclitaxel, Vincristine, Vinblastine, Artemisinin, Camptothecin, Podophyllotoxin and such.

The nutraceutical marketplace in Europe is estimated to be $ 9 billion, while the US marketplace, estimated to be $10-12 billion in 2003, is expanding at a compounded rate of more than 20% per year. US Congress has fueled the rapid growth of nutraceuticals with the passage of the Dietary Supplement Health and Education Act (DSHEA) in 1994. Globally, there have been efforts to monitor quality and regulate the growing business of herbal drugs and traditional medicine.

Introduction

Water is not only a vital environmental factor to all forms of life, but it has also a great role to play in socio-economic development of human population. Since antiquity humans have valued the importance of clean water and have used various techniques to improve its quality. In modern times, the safe drinking water became first a public health issue and then a human rights issue. The access to safe drinkin gwater now considered as a basic human right which is an essential component of effective policy for health protection. Improving access to safe drinking-water can result in tangible as well as intangible benefits to health. It has been shown that investments in water supply and sanitation can yield a net economic benefit, because the reductions in adverse health effects and healthcare costs outweigh the costs of undertaking the interventions (WHO, 2017). Past experiences have also proved that interventions in improving access to safe water favour the poor in particular, whether in rural or urban areas, and can be an effective part of poverty alleviation strategies. The disparity in water availability, reliability, and quality between the developed world and developing countries is enormous. Unfortunately, in many developing countries people lack access to safe water and therefore waterborne diseases are still a major cause of death, especially among children under age of 5. According to a joint report by World Health Organization (WHO) and United Nations International Children’s Emergency Fund (UNICEF) (WHO/UNICEF report 2017), around 2.1 billion people worldwide lack access to safe and readily available water at home, and around 4.5 billion, lack safely managed sanitation facilities. Moreover, many of these countries that have set drinking water standards often lack the resources to implement or enforce them.

Introduction

India, with its unique agro climatic conditions is capable of producing a wide variety of fruits and vegetables. These highly perishable produce in both fresh and processed forms are of high demand in domestic as well as international market. Nowadays farming is becoming an enterprise and shifting towards consumer driven agriculture. Produce quality measurement is of utmost importance as consumers are more quality conscious and ready to pay higher for quality. Consumer preference is moving towards healthy food, minimally processed and, fresh cut fruits and vegetables, prepared salads, ready to cook, ready to eat and ready to drink health beverages. Hence health, nutrition, convenience, quality and safety of produce should be guaranteed to the consumers. Due to globalisation of production and trade, legislations and standards for markets are strict and product quality is the necessity for competitive markets.

Quality of a produce, based on subjective and objective measurement, is defined differently by consumers, wholesalers, retailers, processors or any other who is associated with it and varies with market either national or international. Quality of foods may be defined as the composite of those characteristics that differentiate individual units of a product, and have significance in determining the degree of acceptability of that unit to the user (Kramer, 1965). According to ISO (International Organisation of Standardisation), “Food quality is the totality of features and characteristics of a product that bear on its ability to satisfy stated or implied needs” and as per CAC (2003), “Food safety is the assurance that food will not cause harm to the consumer when it is prepared and/or consumed according to its intended use”. Food safety is the most important component of quality.

Food is a resource of immense importance and its safety in the whole production and supply chain, is very crucial. In the last century, drastic increase in the incidence of food borne illnesses, large-scale food poisoning outbreaks and surfacing of new foodborne pathogens and hazards were widely reported. Contaminants can enter food through various pathways in the food production process, and can occur naturally or as the result of inferior or inadequate production practices. Concerns on food safety are fuelled by the industrialization of agricultural production, liberalization of trade, tourism, food consumption pattern and food preparation practices. The availability of information through the mass and social media increases the number of reported cases of inadequate food safety. International competitiveness depends more on quality and safety concerns than on prices and this creates a need for safer food production and distribution practices.

Introduction

Food Safety is the assurance that food is acceptable for human consumption according to its intended use. The slogan of the World Food Safety Day 2019 “If it’s not safe - it’s not food!” portray, unsafe food is a threat to mankind. Ensuring food safety to protect public health and promote economic development is of utmost importance and it remains a significant challenge in both developing and developed countries. Food borne diseases remain a real and formidable problem, causing great human sufferings and significant economic losses. According to WHO 2019-20 World Water Day report, one third of the population of developed countries may be affected by food-borne diseases each year and the problem is likely to be even more wide spread in developing countries, where food and water borne diarrhoeal diseases kill an estimated 2.2 million people each year, mostly children. While unacceptable rates of food borne illness still remain, new hazards continue to enter the food supply.

A food safety hazard refers to any agent with the potential to cause adverse health consequences for consumers. It occurs when food is exposed to hazardous agents which result in contamination of food. In other terms it can be defined as anything that could contaminate food or could otherwise violate established food safety program criteria, if left uncontrolled. The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, 1997) defined a hazard as a “biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control”.

A hazard may be introduced into the food supply any time during harvesting, formulation and processing, packaging and labelling, transportation, storage, preparation and serving. Food safety hazards are generally categorized into four classes: Physical, chemical, biological and allergens. Food manufacturers can adopt Food Safety Management Systems (FSMS), which include Good Manufacturing Practices (GMP), Good Hygiene Practices (GHP), Hazard Analysis and Critical Control Point (HACCP) and other practices to strictly check the hazards and make the food safe.

Understanding the hazards that contribute to food borne illness and injury is important to determine the necessary steps to prevent or reduce it to an acceptable level or eliminate hazards altogether before food reaches the consumer.

Introduction

Fruit and vegetable development starts with formation of an edible part fruit setting, seedling emergence, tuber development and ends with loss of edible character, or spoilage through physiological deterioration, development of fibrous character or spoilage through microbiological intervention . The state of maturity of a fresh horticultural commodity is therefore is a continuum process along the development scale. The term mature implies that point in the development scale when the horticultural commodity in the state that is ready to use (consume, process, store). For the packing house, maturity means suitability for storage followed by sufficient shelf life to assure profitable supply to markets. On the other hand, the retail consumer may value colour, flavour, or textural attributes. This implies that maturity and an appropriate compromise must be achieved through the marketing process.

Quality, on the other hand, relates to the degree of the satisfaction that the consumer or customer is likely to obtain through the use of mature commodity. Maturity and quality are interrelated with market expectations or requirements. These expectations or requirements are expressed through regulations or guidelines of grower groups or through legislative authority expressed as quality standards or grades and enforced through inspection agencies associated with government departments.

Introduction

Pulses are the second most important group of crops after cereals in India. They are important food crops for nutritional security, soil health and sustainable agriculture. Consequently, they remained an internal component of Indian agriculture especially under rainfed since time immemorial. They are among the ancient food crops with evidence of their cultivation for over 8,000 years. India, China, Brazil, Canada, Myanmar and Australia are the major pulse producing countries with relative share of 25%, 10%, 5%, 5% and 4%, respectively. In 2017, the global pulses production was 95.98 million tonnes from an area of 95.17 million ha with an average yield of 1008 kg/ha. Dry beans contributed 32.7% to global total pulses production followed by chickpea (15.4%), dry peas (16.89%), lentil (7.91%) and pigeonpea (7.1%). About 70% of the global pigeonpea, 60% of chickpea and 17% of lentil area falls in India (FAO STAT, 2018). India is the largest producer and consumer of pulses in the world contributing around 25-28% of the total global production.

India can be proud of growing the largest number of pulse crops (grain legumes) in the world. Over a dozen pulse crops including chickpea (Cicer arietinum), pigeonpea (Cajanus cajan), mungbean (Vigna radiata), urdbean (Vigna mungo), cowpea (V. unguiculata), lentil (Lens culinaris), lathyrus (Lathyrus sativus L.), frenchbean (Phaseolus vulgaris), horsegram (Macrotyloma uniflorum), field pea (Pisum sativum), moth bean (V. aconitifolium), etc. are grown in one or the other part of the country throughout year. The latest data (2017-18) indicate that the present production of pulses is 25.23 million tonnes from an area of 29.99 million ha with productivity of 841 kg/ha (DAC, 2019) (Fig. 1). The stagnant growth of pulse production and continuous increasing human population in the country led to decline in per capita consumption of pulses from 67 g/day/person during 1951 to 35 g/day/person during 2010 (Indian Council of Medical Research recommends 65 g/day/person).

The most important pulse crops grown are chickpea (48%), pigeonpea (15%), mungbean (7%), urdbean (7%), lentil (5%) and field pea (5%). To fulfill domestic demand of pulses in the country, India has to import 3-4 million tones of pulses every year. In order to ensure self-sufficiency, the pulse requirement in the country is projected to be about 50 million tonnes by 2050 which necessitates an annual growth rate of 4.0% (IIPR, 2013).

Introduction

Livestock is an important component of Indian agriculture contributing 28% of agricultural gross value added (GVA) of the country. Agriculture, as such, contributes 16.4% of country's GVA (Economic survey, 2017-18). Livestock as a source of income has seen a steady increase from 4% to 13% in a decade time (2002-2012). India, with 2.29% of the world land area, is maintaining about 10.71% of the world’s livestock population. The milk production in the country increased from 17 million tonnes in 1950-51 to 187.7 million tonnes in 2018-19. The feed and fodder play an essential role in the health and productivity of livestock. Even though India is the world largest milk producer with 21% of global production, the productivity (1700 kg/year) is far below the world average (2574 kg/year) (FAO STAT, 2018). One of the main responsible factors (50.2%) for this low productivity is the deficiency in feed and fodder. Although forage crops are the critical component of livestock-based farming system, the area under cultivated fodder is static to around 8.4 million ha (5.23%) since last two decades due to the competition of land use with other crops. Availability of the fodder determines the productivity and profitability of the livestock rearing because fodder and feeds constitute about 60% of the total cost of milk production, which can be lowered by enhancing the green fodder-based feeding system. The traditional grazing lands are gradually diminishing because of urbanization, expansion of the cultivable area, grazing pressure, industrialization etc. These factors coupled with stagnation of area under cultivated fodder resulted in a severe shortage of feed and fodder to the extent of 26% in dry crop residues, 35.6% in green fodder and 41% of concentrates (IGFRI, 2011). This gap in demand and supply may further rise due to consistent growth of livestock population at the rate of 1.23% in the coming years. The share of the in-milk population to total population has increased from 23% to 27% in the case of cattle and from 33.64 to 34.74% in buffaloes from 2012 to 2019. The year-on-year growth rate of milk is approximate 6%. Thus, to sustain this growth rate and for further expansion to meet the demands of the ever growing human population, livestock needs a sustainable supply of feed material. To reduce the demand and supply gap, the production and productivity of fodder crops need to be enhanced. The productivity of cultivated fodder crops is low, due to the least attention and allocation of minimal production resources and lack of dissemination of the production techniques to stakeholders involved in the forage resource development. The present chapter highlights the recent advances in the forage crop production technologies. The comprehensive compilation of information at one place provides the opportunity to get the holistic picture of forage production altogether.

Introduction

Value chain analysis has gained considerable popularity in recent years. Although many definitions are applied, value chains essentially represent enterprises in which different producers and marketing companies work within their respective businesses to pursue one or more end markets. Value chain participants sometimes cooperate to improve the overall competitiveness of the final product, but may also be completely unaware of the linkages between their operation and other upstream or downstream participants. Value chains therefore, encompass all of the factors of production including land, labor, capital, technology, and inputs as well as all economic activities including input supply, production, transformation, handling, transport, marketing, and distribution necessary to create, sell, and deliver a product to a certain destination.