eChapters

Abstract

Mycorrhizal symbiosis is a highly evolved mutually beneficial relationship found between Arbuscular Mycorrhizal Fungi (AMF) and vascular plants. Knowledge of taxonomic and functional diversity of AM fungi is important in understanding the biology and ecology of such a widespread mycorrhizal symbiosis. Classification and identification of AM fungi remains in the formative stages of growth, with all the attendant turmoil. Since Glomus is known to be an important AM genera for providing multifacet benefit to several economically important plants. Hence, in this review article an attempt has been made to describe 120 Glomus species along with the line diagram of 63 Glomus species for their proper identification that can be used as an identification manual for mycorrhizal researchers.

S    :    Second.

S    :    Sedimentation coefficient. OR Svedberg unit.

S phase    :    The period during the cell cycle when the chromosome is replicated.

S7P    :    Sedoheptulose-7-phosphate.

Acid soils are found in India in about 93 million hectares ( Table 1) and they occur in the Himalayan region, the great Indo-Gangetic and Brahmaputra plains, peninsular plateau and uplands and the coastal plains including island eco-systems under varying environmental conditions of landscape, geology, climate and vegetation. Conditions which are conducive for the formation of acid soils, such as high rainfall coupled with high temperature encouraging intense weathering and loss of alkali and alkaline earth metals with a simultaneous accumulation of iron and aluminium hydroxy compounds or the formation of free acidic substances in the humid forest foot hill regions, exist in some region or other in almost all the states in India.  A soil with pH less than 7.0 is deemed as an acid soil (Soil Survey Staff,1951). However, for characterization and classification, acid soils may be defined as those having pH less than 5.5 in 1:1 water extract (Soil Survey Staff, 1999).

The jackfruit tree or jack or simply known as jak (Artocarpus heterophyllus) belongs to the mulberry family (Moraceae) and its fruit, jackfruit, is known as the “poor-man's food” (Bose, 1985; Haq, 2006; Ramanani and Rao, 2001; Rowe-Dutton, 1976; Sonwalkar, 1951; Verheji and Coronel, 1992). It is believed to be native to Southwestern India, Bangladesh, Nepal and Sri Lanka (Answers.com, 2009). It is possibly also native to the Philippines and also East to the Malay Peninsula. The fruit is large, oval and covered with a thick rind that has hexagonal protrusions. Inside the fruit, we find the yellow, fleshy and banana-flavoured carpel or large "bulbs" (which are botanically the perianths) massed among narrow ribbons of thin, tough undeveloped perianths (or perigones), around a central, pithy core. Each bulb encloses a smooth, oval, light-brown coloured "seed" (endocarp) covered by a thin white membrane (exocarp).

Importance of Foods

The word “instant” has been used in widely different types of premixes to specify the products either as ready-to-eat food or semi processed foods. The instant premixes available in Indian market were classified as Indian products and Westernized or sophisticated products. The instant mixes included under Indian market products are spice mixes, snack mixes and desert and sweet meat mixes. The Westernized products (instant mixes) contained soup mixes, beverage mixes, desert mixes and soft drink mixes.

Convenience foods are gaining popularity in recent years as they are very easy to handle, require minimum storage space and are attractive. Convenience foods have emerged as a new set of products in the international market. Most of the traditional foods that are commercially available in our country are being prepared / processed by cottage industries and by some of the multinational companies. The various types of convenience foods/ instant mixes that are presently being processed, marketed and consumed all over the country. Supplementation with protein-rich sources and preparation of acceptable ready-to-eat snack foods would not only correct its nutritional inadequacies, but would also provide a variety.

Instant mixes were high in nutritive value especially needed for armed forces, light in weight, easy to carry and prepare. Rapid industrialization and urbanization and changes in eating habits of Indian people led to very high demand for ready-to-use snack foods. The convenience instant foods are meeting the urgent and exigency situations of offering hospitality to unexpected guests.

Changing life styles and values are at the root of considerable changes in eating habits over the last few years. Hand-in-hand with a strong demand for fast and take away foods, there has been a marked upturn in popularity for convenience foods in India. The major reasons for this trend are: the decline of the family meal time, growth in disposal incomes (only in cases of city dwellers), the desire for more leisure time and demand for “foreign” or “sophisticated” dishes inspired by the media and increased travel.

Dairy byproducts constitute an important segment of dairy industry. An important criterion in the economic choice of any process is the efficient utilization of byproduct that is produced along with the main product. The main byproducts of dairy industry are skim milk, buttermilk, whey and ghee residue. Each and every component of milk must be judiciously processed into edible form not only to improve the profitability of dairy industry but also to make best use of the unique nutritional value of the precious milk constituents on one hand, and to prevent environmental pollution, on the other. However, dairy plants, particularly in India, are usually confronted with the problem of byproduct utilization, especially that of whey and ghee residue in economical manner.

Skim milk is a byproduct obtained during the manufacture of cream. It is rich in solids-not-fat content and has high nutritional value. In dairy plants, it is mostly utilized either in standardization for the manufacture of main dairy products or preserved by removing moisture in milk powder form. The skim milk when utilized in either of these two forms or consumed as liquid, is not considered a byproduct. It is regarded as a byproduct only when it is either not economically utilized or utilized for derived byproducts, like casein and other related products, co-precipitates, protein hydrolyzates, etc.

Buttermilk is the byproduct obtained during butter manufacture. Sweet cream buttermilk resembles skim milk in gross chemical composition and is usually admixed with bulk of skim milk for further spray drying or even product manufacture in dairy plants. Desi buttermilk, on the other hand, has long been an important domestic beverage in India. It has high nutritive and therapeutic value. It also finds its way in the preparation of a host of culinary dishes such as kadhi, dhokla and idili. Also a number of federations and private plants sell salted and spiced buttermilk in 200 ml pouches.

Seed Production Technology

1.    Paddy
2.    Sorghum
3.    Bajra        
4.    Maize              
5.    Blackgram    
6.    Soyabean                
7.    Cowpea             
8.    Redgram 
9.    Groundnut
10.    Sunflower
11.    Castor       
12.    Gingelly
13.    Tomato
14.    Brinjal
15.    Chilli
16.    Bhendi

12.1 Introduction

Man is the most beautiful of all God’s creations and like man, his environment too is beautiful with rivers to quench his thirst with sweet water, atmosphere to provide him oxygen, land and fire to provide him food. Primitive man ate uncooked food and lived in caves. Soon he learnt the use of firewood for cooking of raw meat and provided the first instance of ‘Pollution from food processing’ in history. As man shifted from one place to another, this sort of living never polluted the environment. But as the man ascended the ladder of civiliz ation, his needs grew in arithmeti c progression but corresponding pollution grew in geometric progression. With increase in agriculture produce, a need was felt to preserve the glut production in the form of processed foods giving rise to massive development of food processing industries all over the world. The rapid industrialization of agriculture and horticulture, increased the pollution load many folds especially the biodegradable waste from food industry [41].The wineries and distilleries (distill wine to make brandy) are no exception. Nevertheless, the waste is a precious source of several useful materials as such or after fermentation [1,31,46,86]. Thus, development and environment are two sides of the same coin.

From time immemorial, the biosphere is acting as a sink for all the waste products and recycles them to make good the loss so that every generation finds it the same as one before it. But, of late, this self-cleaning and equilibrium maintenance of biosphere is disastrously disturbed as the waste produced from man’s activities is continuously exceeding the capacity to purify herself. Consequently, our biosphere is becoming more and more poisonous and days are not far away when this planet will become inhabitable.

Reproduction

Since the life of an individual plant is limited in duration, it has developed certain mechanism by which it can reproduce itself inorder to continue the perpetuation of the species and also to multiply in number. Mode of reproduction determine the genetic constitution of crop plants, that is, whether the plants normally homozygous or heterozygous. A knowledge of the mode of reproduction of crop plants is also important for making artificial hybrids. The various modes of reproduction found in crop plants may be broadly grouped into the following two categories : (i) Asexual and (2) Sexual.

Asexual Reproduction

Heterosis breeding systems depend upon the reproduction system of plants, whether the plant is propagated asexually or sexually. Therefore, before development of hybrids, information regarding type of flower, flowering habits and floral biology is required in hybridization programme (emasculation and pollination). In a sexual reproduction, plants develop from vegetative parts of plants (vegetative propagation) or may develop from unfertilized gametes, ovular tissues, and modified cells (apomixes). Vegetative reproduction includes plant regeneration from underground stems such as tubers in potato, bulbs in onion and garlic, underground tubers such as sweet potato, corms in yams, and rhizomes in ginger and turmeric. In certain cases, aerial parts are used for propagation as stem cuttings in tapioca, sweet potato, watercress, and drumstick, root suckers in curry leaf and globe artichoke and turfts in chive. In apomixes, sexual reproduction or gamete fusion is replaced with other form of asexual reproduction. In this case, embryo develops without fertilization. Apomixis may be of different types: (1) Apogamy—where embryo develops from a gametic cell of embryo sac other than egg cell. Apogamy may be haploid or diploid. Diploid apogamy has been reported in onion. (2) Polyembryony—where more than one embryo develops from a seed, resulting in more than one seedling. In this case, embryos usually develop from nucellus integuments, or chalaza in addition to normal syngametic embryo. (3) Parthenogensis where embryo develops from an unfertilized egg. This may be at haploid or diploid level. Sometimes, embryo development take place from unfertilized egg of a diploid plant. This is called haploid parthenogenesis. It originates in plants due to environmental effects, especially due to effects of high or low temperature, use of foreign pollen, application of chemicals, and use of irradiated pollen. Haploids parthenogenesis produces haploids.

Leisa

Sustainable agriculture is an important element of the overall effort to make human activities compatible with the demands of the earth’s eco-system. Thus, an understanding of the different approaches to ecological agriculture is necessary if we want to utilise the planet’s resources wisely.

While sustainable agriculture is based on long-term goals but not a specific set of farming practices, it is usually accompanied by a reduction of purchased inputs in favor of managing on-farm resources. A good example is reliance on biologically-fixed nitrogen from legumes versus manufactured nitrogen fertilizers. Low-input agriculture is one of several alternative farming systems whose methods are adaptable to sustainable agriculture.

Low-input farming is based on a reduction—but not necessarily elimination—of chemical fertilizers, insecticides, and herbicides. Farmers are adopting these practices primarily to reduce costs, but also because they want to minimize impact on the environment or because they perceive future pesticide regulations.

In a search for information on how to farm with fewer chemicals, it is helpful to examine alternative farming systems in existence that largely exclude chemicals in favor of biological farming practices. Experiences of producers who have successfully practiced these methods are valuable to farmers considering a transition to low-input sustainable agriculture.

In addition to farm ponds, irrigation to crops can be met from other sources. The main sources can be broadly classified as: (i) Canal irrigation, (ii) Well Irrigation and (iii) Lift irrigation. In arid and semi arid areas, where availability of water is scarce, pitcher irrigation is practiced. These sources of irrigation are briefly mentioned as follows.

13.1 Canal Irrigation

To feed the world population of 8 billion in 2025 AD, it is necessary to bring more area under irrigation because irrigated farms typically get higher yield under provision of irrigation. The food production will have to increase by about 50 percent to feed some two billion more people by 2025 AD, and a large part of that increase needs to come from irrigated agriculture. It is reported that the yield of different crops are generally 2-3 times higher than the crops grown under rainfed conditions. Furthermore, it is possible to raise 2-3 crops round the year under irrigated agriculture whereas hardly a single crop is successfully grown in a year under rainfed condition. It is reported that about 40% of the world’s food production comes from only 17% of the irrigated land of the world (Sivanappan, 2000). Everybody is aware of the fact how the irrigation played a crucial role to make the Green Revolution in India successful. A major part of irrigation is achieved by canal irrigation through different irrigation schemes.

A project that makes use of weir or a barrage for providing irrigation to fields is called as direct irrigation scheme. On the other hand, a storage irrigation scheme makes use of storage reservoir by construction of dams. In order to provide irrigation by both the schemes, it is necessary to have a network of canal systems including main canals, branch canals, distributaries, minors and watercourses. It is imperative to design the canal systems properly for a certain realistic value of peak discharge that must pass through them so as to provide sufficient irrigation to the command areas. These canals have to be aligned and excavated either in alluvial soils or non-alluvial soils; depending upon which they are called alluvial canal or non-alluvial canal.

8. 1 Introduction

Water is a precious commodity. Necessity of conservation of water supply is increasingly felt all over the world as the demand of it continues to increase when the sources of supply are increasingly scarce. The conveyance and proportional distribution of water is one of the most important part of any irrigation project. Water available in the stream, reservoirs or wells is carried to the field of use through canals. The economy of any irrigation project largely depends on how efficiently the water is being transported and distributed in respect to water losses and cost.

Water losses in irrigation channels are mainly due to evaporation from the water surface and seepage from the bed and side of the channels. Seepage losses some time become the single important factor which causes unavailability of water particularly in downstream of the channel in canal irrigation system and excess pumping of water in tube wells and river lift irrigation system.

Lining irrigation channels means to cover the channel earthen surface by any substance, which can considerably reduce the seepage loss. The concrete, brick, stone, natural clay of low permeability, bituminous material, plastic compounds, etc. , are used for channel lining.

Isolation and Purification of Secondary Metabolites

Isolation

The act of isolating something; setting something apart from others.

Purification

The process of making pure, free from anything that debases, pollutes, or contaminates, the process of removing impurities.

8.1. INTRODUCTION

The word ‘non-parametric’ means “not for any specific parameter”. For example, in the student’s t test we use the parameter ‘mean’. In the non-.parametric tests we check the randomness and trend of the pattern of distribution of a variable directly, without using a population parameter for comparing.

In contrast to the parametric tests, where many assumptions are made regarding the distribution of the parameter in the population (i.e. Gaussian features), here we do not make stringent assumptions about the population from which samples are drawn. These techniques are, therefore, also known as ‘distribution free’ tests.

We shall be discussing about 10 such non-parametric tests.

Abstract

Microorganisms that produce methane as their metabolic end product are known as methanogens. Methanogens are prokaryotic, unicellular, obligate anaerobes having fastidious growth requirements making them difficult to isolate and preserve. They catalyse the terminal step in anaerobic breakdown of organic substances. Even though methanogenic archaea or methanogens show very limited metabolic diversity, they are one of the most phylogenetically and ecologically diverse group of Archaea. Methanogenic community varies greatly with respect to temperature. Methanogens have been reported from permanently frozen habitats like permafrost to hyperthermophilic environments such as hydrothermal vents. However, the metabolic and phylogenetic diversity of methanogens in these habitats vary greatly. Methanogens are the biocatalysts, having the ability to provide a solution to help solve energy crisis by producing methane as storable energy carrier. Methane being a flammable gas, can act as a clean and renewable source of energy. The biogenic methane gas thus produced may serve as an efficient alternative for fossil fuels in the future.

The family Enterobacteriaceae belongs to the order Enterobacterial. The family comprises 25 genera such as Escherichia, Salmonella, Klebsiella, Yersinia, Proteus, Providencia, Shigella, Enterobacter, Morganella, Edwardsiella, Budvicia, Cedecea, Citrobacter, Ewingella, Hafnia, Kluyvera, Leclercia, Leminorella, Moellerella, Pantoea, Rahnella, Tatumella, Trabulsiella, Serratia and Yokenella, out of which the first 10 genera are consistent pathogenic in humans, animals and birds.

Escherichia coli

Escherichia coli were first isolated by Theodor Escherich in 1885 from the faeces of infants. It was named in honour of the German pediatrician and its major natural habitat (colon). Previously it was also known as Bacillus coli or Bacterium coli (B. coli).

5.1. Australia’s Experience and Approach to Pest Risk Analysis

Australia applies the principles of pest risk analysis for the identification and management of sanitary and phytosanitary risks associated with new trade proposals and, where the need is identified, to the review of sanitary and phytosanitary risks of existing trade. One such trade activity is the intentional importation of exotic plant species not yet established in Australia.

Of approximately 250 000 plant species in the world, 30 000 have been intentionally introduced to Australia since European colonization, along with an unknown number of unintentional introductions, of which about 2 700 have naturalized (Cunningham et al., 2003). Some become problematic plants of which about 300 have become serious weeds of agriculture and natural ecosystems. Clearly, the majority of plant species have yet to be introduced to Australia and some of these would become weeds if allowed into the country.

The weed risk assessment (WRA) system is a decision support tool that is employed by Australia in applying the principles of pest risk analysis to the review of sanitary and phytosanitary risks associated with the intentional importation of exotic plant species not yet established in the country. The WRA system is used specifically to assess the weed potential of such species. It generates a score for a species based on its history as a weed in other parts of the world, climatic suitability to Australia and biological attributes. The weed risk assessment (WRA) system is one means by which the assessment component of pest risk analysis is addressed. The WRA system is a question-based scoring method that can be operated using a computer or manually using paper-based forms. A Microsoft® Excel spreadsheet version of the system, including documentation, has been made available through the International Phytosanitary Portal

Soil degradation is defined as a decrement in the soil health status resulting in a diminished capacity of the ecosystem to provide goods and services for its beneficiaries. Degraded soils have a deteriorated health status such, that they do not provide the normal goods and services of the particular soil in its ecosystem. Soil degradation is the physical, chemical and biological decline in soil quality.

1. The smallest size soil separate is

a. Sand      b. Silt

c. Clay        d. Loam

In agriculture, crop production is the main activity. However, the income obtained from crops may hardly be sufficient to sustain the farm family throughout the year. Assured regular cash flow is possible when the crop is combined with other enterprises. These other enterprises or components are called allied components.

Confectionery fills an especially direct need; the sugar of agreeableness joined with exquisite flavors, smells and mouthfeel affects a basically transitory feeling of thriving and joy. Sugar confectionery has been made all through the long haul with extending headway and it remain alive in unlimited plans following a changed levels of agreeableness, flavors just as scents, feel, appearance and tastes

1.1. Origin and distribution

• Centre of origin is Peru, Bolivia, and South America in the Central Andean region.
• Introduced into India in early 17^th Century
• In India, cultivation of potato began first in Nilgiris in 1822.
• Mainly grown in Uttar Pradesh, West Bengal, Punjab, Karnataka, Assam and Madhya Pradesh.
• Commercial potato species - Solanum andigenum - not very common. Plants are thin and long stem, small and narrow leaflets. Flowers more profuse, long stolons and mostly coloured deep eyed tubers.
• Solanum tuberosum: More common, plants shorter and thicker stem,

5.1 Irrigation Channels
Canal or channel is an artificially made conduit through which water is supplied to the field from river, tank, reservoir or wells. The open channel is the most common type of water conveyance system. If the pipes and drains are partially full behave like open channel. The irrigation channel may be lined or unlined and the flow is either uniform or varied.

The canal may be classified in following ways.

a) Classification based on the source of supply i) Permanent or perennial canal ii) Inundation canal

A canal is said to be permanent when it is fed by a permanent source of supply and has permanent networks of distribution of supplies. Inundation canals draw their supplies from river usually when water stage exceeds a predetermined level. Headworks are not provided for diversion of river water to canal. However, canal head regulators are provided to regulate the canal head as required time to time to accommodate the changing pattern of river course.

2.1 Introduction

The journey through the research work and the resultant publication of research articles, review notes and books by innumerable authors in the field of Information Technology, and Communication, Library Sciences, Social Media and Popular Culture has been the basis for this chapter: The Review of Literature. The following is a report of how and what lead to arrive at the objectives, hypotheses and methods of researching this field and the concerns of the researchers and the authors. Reading innumerable articles, research papers, and books helped in writing this literature review strengthened the knowledge about the topic of this study. It has been of immense use to learn essential concepts, research methods, and experimental techniques used in this field. Another benefit of the extensive reading of relevant literature has been the knowledge and understanding of how to present the insights, research findings, and claims discussed and explained scientifically and systematically. Through this reading exercise, the topic of the research and its objectives were finalized. 

Genetic resistance is the more efficient and the more environmentally friendly way to protect crops against phytonematodes. Nematode management is complex, hence, the prevention of an initial phytonematode infestation in pathogen-free areas is of fundamental importance. However, after the entry of the nematode into an area, it is virtually impossible to eradicate because it is a soil-dwelling organism. In this regard, the genetic resistance of plants to nematodes is considered one of the most efficient and economically feasible methods to prevent production losses (Matsuo et?al?, 2012). Thus, breeding for nematode resistance is essential in crop management to obtain a high yield and stable production.

6.1. Leaf Spot, Blight, and Blast

Leaf spots are irregular or round blemishes found on either side or both sides of the leaves. A typical spot is “zonal,” meaning it has a definite edge and a darker border. When lots of spots are present, they can grow together to cover the larger areas of the leaves. Different fungi are responsible for the leaf spots and sometimes a particular fungus causes a peculiar type of leaf spot and includes the fungi.

Introduction

About sixty percent of the world’s food intake comes from the three major crops, i.e., wheat, rice and maize (Thielecke and Nugent, 2018). Depending upon the country of utilization and consumption, the products made from cereals such as barley, wheat, maize, triticale, spelt, buckwheat, rice etc. can vary in the range of pasta, bread, pastries, soups, chapatti, cooked rice etc. World cereal utilization in 2021/22 is forecasted at 2,811 million tonnes and the worldwide production of cereals is expected to reach 2,818 million tonnes by 2025 (FAO, 2020).

Distillation, leaching, and extraction

A. Distillation

Distillation is a widely used separation process in various industries, including chemical, pharmaceutical and food processing. It is particularly important in the production of alcoholic beverages, essential oils, and purified water. Distillation works on the principle of exploiting differences in the volatility of components in a liquid mixture to separate them based on their boiling points.

Principles of Distillation

Distillation is a time-tested and versatile separation technique employed across a myriad of industries for separating components of liquid mixtures. Its effectiveness lies in its ability to leverage differences in boiling points among the various constituents of a mixture.

A brief description of IGMC is given in Para 6.6 with details of the canal sections. Here an attempt is made to review the hydraulic performance of the Main Canal.

7B.1 Study of Flow Characteristic of the Main Canal

The main canal is designed for a maximum discharge of 524 m3/s at head i.e. at Km. 0. Large of number of branches, distributaries and minors off take from the main canal at different location all along the canal. These are shown in the L- section, Figure 7B.1 and a statement off taking canals is given Table 7B.1. Many distributaries such as lift canals have been planned subsequently. Also discharges of few off taking channels have been changed. A clear and updated data are not readily available. So data available are indicated in the Table and plotted in the L - section. A half bottom plan of the canal is also shown in Figure 7B.2

1.     Isolation and Purification of DNA from E.coli
    
2.     Isolation of Plasmid DNA
    
3.     Gel Electrophoresis of DNA
    
4.     Southern Blotting
    
5.     Restriction Digestion

With the increasing health consciousness of consumers, there has been an increasing concern over the use of thermal processing methods like blanching, pasteurization, sterilization etc. for enhancing the shelf life of foods as these methods fail to preserve the fresh like nutritional, therapeutical and sensory qualities of the food. With the increased consumer demand for fresh and fresh-like foods, interest in minimal processing of foods is increasing. The trend is also shifting from the traditional heat processing to those technologies that employ no or minimum heat application, thereby retaining the quality to a maximum level. One of the ways to accomplish this is via use of non-thermal processes. Over the past few years a number of non-thermal processes or cold preservation methods have been invented and developed. These methods are being evaluated in pasteurization and sterilization of various foods or in the extension of shelf life of various packaged foods. Some of such novel technologies and the products prepared, have been discussed here under.

1. Extrusion

Extrusion is a size enlargement process wherein small granular food or powdered particles are re-formed into larger pieces with different shapes, textures, colours and flavours from the basic ingredients. In extrusion food is compressed and forced to pass through a fine opening (die). As soon as it comes out of the opening, the outside pressure is very less as compared to the pressure inside the screw of extruder and the food expands instantaneously. If the food is heated the process is called as extrusion cooking. It is a process which combines several unit operations including cooking, mixing, kneading, shearing, compressing, shaping and forming. Extrusion adds a variety to the products by changing shape, size, texture and even some of the minor ingredients of the food and at a reduced cost than most of the other processing methods. Extrusion cooking (not extrusion) is a high temperature short time (HTST) process that reduces microbial contamination and inactivates enzymes.

Ever since man started domesticating plants and animals for food, feed and fiber, he is facing competition from insects, disease and other pests. The struggle is going to continue as long as man wants plants and animal. The need to save plants/crops from the ravages and depredations of pests and to reduce the losses caused by them became more urgent (Patel, 2004).

India is a predominantly agricultural country and will continue to be so. Neither individuals nor nations can live without agriculture. India is witnessing growth of its agriculture, industry and economy in general, at the same time the population is growing at an alarming pace.

The crop losses by pests in our country are enormous. Chemical control continues to play a major role in crop protection; at the same time it enhances the environmental pollution problem. One has to use chemical control in a precise way by adopting Integrated Pest Management (IPM). In applications of pesticide (which are poisonous), the technique used should be such that minimum quantity of pesticides is applied to cover the Target-Leaf-Foliage with less environment pollution. Water is usually used as a carrier to apply pesticides to the Target-Leaf-Foliage. Beside water, air stream is also used, to carry fine droplet-particles to reach the Target-Leaf-Foliage.

1.    Introduction    71
2.    Microorganisms in Food Industry    72
    2.1.    Microorganisms as the agents of fermentation in  
        traditional fermented foods, 73
    2.2.    Microorganisms as the source of food, 83
    2.3.    Microorganisms as a source of food supplements, 86

3.    Microorganisms in Pharmaceutical Industry    92

    3.1.    Antimicrobial agents from microorganisms, 92
    3.2.     Microorganisms as probiotics, 97
    3.3.    Microbial enzymes in  pharmaceuticals, 98
    3.4.    Mushroom nutriceuticals, 98

1.    Introduction    174
2.    The Thermodynamic and Mechanistic basis of Cellular Metabolism    174

    2.1.      Adenosine triphosphate, 175
    2.2.    Coenzyme A, 176
    2.3.    Modes of ATP synthesis, 177

3.      Components of Electron Transport Chain    181

    3.1.    Electron carriers in ETC, 182
    3.2.    Complex I - NADH dehydrogenase (NADH coenzyme Q reductase), 185
    3.3.    Complex II - Succinate - coenzyme Q reductase, 187
    3.4.    Complex III - Coenzyme Q - cytochrome c reductase, 187
    3.5.    Complex IV - Cytochrome c oxidase, 188
    3.6.    ATP synthese, 188

1.    Introduction    302
2.    Raw Materials for Alcohol Production    304

    2.1.    Sugary substrates, 306
    2.2.    Starchy residues (cereal grains), 309
    2.3.    Cellulosic materials (crop residues), 314

3.    Microorganisms for Alcohol Production    316

    3.1.    Comparision of ethanol production by bacteria and yeasts, 318

Crops belonging to family Cucurbitaceae are generally known as ‘Cucurbits’. It consists of a wide range of vegetables either used for salad purpose (cucumber) or for cooking (all gourds), pickling (West Indian gherkin) or as dessert fruit (muskmelon, water melon) or candied or preserved (ash gourd).  As a group, cucurbits occupy the largest area in India and in other tropical countries. Its use is not primarily because of calories, minerals or vitamins since they are generally low to moderate in nutrients with a few exceptions like bitter gourd (rich in vitamin C- 96mg/100g), pumpkin (vitamin A 1600 IU/100g ), Kakrol (high protein  3.1g/100g,), parwal and chow chow (calcium- 531 mg and  140 mg / 100 g respectively). From the nutritional point of view, cucurbit seeds are valued for their high oil and protein contents.  Seed proteins of cucurbits are comparable to that of legumes and are richer in methionine.

2.1 Introduction

Precipitation is the general term for all forms of moisture emanating from clouds and then ultimately falling on the land surface. It is the total supply of water derived from the atmosphere in the forms of rain, snow, hail, mist, dew, sleet, fog etc. The liquid form of precipitation is called as rainfall whereas the frozen forms of precipitations are snow, hail and sleet. Of all the different forms of precipitation, rain and snow are the two dominant factors that contribute maximum amount of water. In Indian condition, rainfall is the most important form of precipitation that contributes the highest amount of water causing stream flow. Unless otherwise stated, the term rainfall will be used in this book synonymously with precipitation. It is the primary input vector of the hydrologic cycle. Generally it is expressed as the depth water on a horizontal surface over any specified time interval. If the specified time interval is day, then the amount of precipitation is called as daily precipitation. Similarly, the precipitation being contributed over time interval of a month, season and year is termed as monthly, seasonal or annual precipitation. Its form and quantity are influenced by the action of different climatic factors such as wind, temperature and atmospheric pressure. The study of precipitation forms a major portion of the subject of the hydrometeorology.

10.1 Introduction

During rain or heavy irrigation, a part of the rainfall or irrigated water moves below the effective root zone of the crop which moves further below and adds to the water table lying above the impermeable bed or hard rock which is called as  ground  water  reservoir. At  times  the  accumulated  surface  water  is  also recharged to the soil reservoir both naturally as well as artificially that add to the underlying ground water reservoir. This groundwater is an important source of water for irrigation as well as domestic uses. It is the most abundant fresh water resource of the earth. Underground water reservoirs contain large stock of fresh water resources. Total quantity of groundwater within 800 m distance below  the  ground  surface  is  more than  30  times  the  total  water  in  all fresh water lakes, more than 60 times the total water in soil and other unsaturated rock materials, more than 300 times the water vapour in the atmosphere and 3000 times the average volume of all rivers and rivulets in the world (Lenka, 2001). But the distribution of groundwater is not uniform.

11.1 Introduction

The laws governing the flow of water in wells are referred to as the hydraulics of wells. Just like surface water flows from a higher elevation to a lower elevation by gravity, groundwater also flows from a region of higher water table to a region of lower water table. This difference of water table measured by any two piezometers divided by the longitudinal distance between them is called as hydraulic gradient. Hydraulic gradient plays a dominant role in deciding the flow of groundwater. This hydraulic gradient together with the hydraulic conductivity of the aquifer material forms the main law of well hydraulics called as Darcy’s law. An understanding of Darcy’s law together with some other laws as discussed subsequently in this chapter is essential in order to know the discharge of a well in a particular formation. Darcy’s law is valid for studying groundwater flow in alluvial formations. However, it is not valid for aquifers having hard rock areas.

Introduction

Plants are the main source of nutrition to farm animals for their maintenance and production. But, under certain conditions, plants intoxicate farm animal life due to the presence of some deleterious substances called phytotoxins. Such plants include a variety of fodder plants (Jowar, wheat straw, Lucerne), grasses (Millet grass), ornamental or fencing plants (Crotons, Nerium sps) and weeds (Tribulis) in the farm premises.

India is a vast country with varied soil and agro-climatic conditions and therefore is able to grow a wide range of vegetables. In view of their productivity, diversification, nutrition, value addition and export, vegetables are an important component in Indian agriculture. Up to 1939, vegetable seeds were used to be imported from Australia, U.K., U.S.A., but after World War I and II, India started seed production of vegetables. In the recent past, the seed industry has made rapid strides over the past three decades and has contributed significantly to the quantum jump in agricultural production and India emerged as the second largest producer of vegetables, next to China in the world. During 2005-2006, India produced 113.5 million t of vegetables from 7.2 million ha with a productivity of 15.76 t/ha. The seed industry has increased certified and quality seed production and distribution by the organized sector to about 60 lakh quintal from 300q in 1964-65. India can be proud of having launched and managed both crop improvement and seed improvement as simultaneous and parallel programmes playing complimentary and synergistic roles.

    1.    Food : defined as something which is eaten / drunk by human beings or something we eat and which can be utilized by our body.

    2.    Milk and milk products like Dahi, yoghurt, paneer, cheese, Khoa etc these foods are rich sources of Vitamin A, Riboflavin and Calcium.

    3.    Meat, fish, poultry etc besides proteins these foods also provide Iron and B- complex Vitamins.

    4.    Eggs and egg products are also rich in Iron, Vitamin A and Riboflavin (B1).

    5.    Pulses, nuts and oil seeds are also a good source of thiamin, niacin, and Iron.

    6.    Strategies and measures for alleviating the world food problem require.

Partitioning of assimilated carbon among sink organs is a critical factor that controls the rate and pattern of plant growth. Environmental stress often restricts resource availability while successful acclimation sets in motion processes that restore the supply. A key mechanism contributing to regulation of carbon partitioning is an expression of genes that control activity of the enzymes which initiate sucrose metabolism at specific sites and stages of ontogeny. Drought stress not only limits the size of the source and sink tissues but the phloem loading, assimilate translocation and dry matter portioning are also impaired. However, the extent of effects varies with the plant species, stage, duration and severity of drought. Crop production faces many challenges, due to changing environmental conditions and evolving needs for new plant-derived materials. 
The extreme temperatures those are consequences of present-day global climate changes are considered as major abiotic stresses for crop plants. Temperatures exceeding the limits of adaptation substantially influence the metabolism, viability, physiology, and yield of many plants. Plants exposed to extreme temperatures often show a common response in the form of oxidative stress. However, the extent of damage caused by extreme temperatures depends greatly on the duration of the adverse temperature, the genotypes of the exposed plants, and their stage of growth. Numerous research findings support the notion that induction and regulation of antioxidant defenses are necessary for obtaining substantial tolerance against environmental stress. Plant adaptation to either high temperature or low temperature is a multigenic response which is very complex in nature. Plant response to continuous light depends on plant tolerance and can be modified by alteration in temperature, light intensity, CO2 level, and other environmental factors.

Introduction of Food Industry

India is one of the major food producers in the world. The food sector contributes to about 28% of India's GDP. India stands at 1st position in the world for production of cereals, milk, livestock, banana and Mango, 2nd in producing fruits and vegetables and ranks amongst top 5 in producing rice, wheat, groundnut, tea, coffee, tobacco, spices, sugar and oilseeds. India's share in global production of fruits is 10% and vegetables are 13.7%. The current consumption of fruits and vegetables is approx Rs.2 lakh crores at current prices with an estimated growth rate of 11% per annum. The growth rate is higher than cereals and milk and comparable to meet consumption

Status of Food Processing Industry

The food processing industry in India is still in a sorry state. The rural population comprising 70% including small cities, consume less than 10% of the processed foods and vegetables, whereas 60% of the processed food is consumed in four major metropolitan cities and 30% in the state capitals and big cities. Another fact is that 40% of the processed food and vegetables produced in the country in terms of value are bought by institutional buyers like Hotels, Restaurants and Defense etc. The highest growth in domestic market has been in fruit drinks, tomato ketch up and Jams.

There is another fact that India is the largest milk producer in the world, however, organized industry accounts for less than 15% of the milk produce in India. It is estimated that there may be a total production of 1100 million tons of production of food products mainly food grains, oilseeds, sugarcane and fruits/vegetables during 2011-12 and leaving marketable surplus of 870 million tons.

    1.    Rice is a
        a)    Edible fruit    b)    Edible Vegetable
        c)    Edible flower    d)    All
    2.    Major components in cereal seeds are 
        a)    Endosperm    b)    Germ or embryo
        c)    a & b    d)    None
    3.    Bran is composed of 
        a)    Pericarp    b)    Testa
        c)    aleuron layer    d)    All
    4.    Oats contains ______________ percent of hull
        a)    50    b)    40
        c)    30    d)    20

    1.    Laminar flow hood works on the principle of 
        a)    High-efficiency particulate air filter
        b)    High-energy particulate air filter
        c)     High-efficiency pressure air filter
        d)     None
    2.    Most of the organisms are killed
        a)    121°C for 5 min.    b)    15lb/in²
        c)     a & b    d)     None
    3.    Autoclaving is not recommended for
        a)    Oils    b)    Powders
        c)     Sensitive fluids    d)     All

Seed Testing
1.    Sampling

2.    Determination of Heterogeneity

3.    Purity analysis

4.    Germination Test

5.    Seedling Evaluation

6.    Quick Test for Viability

7.    Estimation of Seed Moisture

8.    Grow Out Test

9.    Seed Health Test