eChapters

3.1 Malted Milk
Malted milk, originating from the ideas of British pharmacist James Horlick in the 19th century, was initially marketed under the name “Diastoid” before being trademarked as “malted milk” in 1887. Although initially targeted
for infants and invalids, its appeal expanded due to its nutritional value, convenience, digestibility, and palatability. Recognized globally for its lightweight, non-perishable nature, and high-calorie content, malted milk is
created by evaporating a mixture of malted barley, wheat flour, and whole milk until it forms a powder.
There aremainly two types of malt powder: diastatic and non-diastatic. Diastatic malt containing enzymes breaking down starch into sugar, aiding in dough rise and crust formation, particularly in bread making. Non-diastatic
malt lacks active enzymes and is primarily utilized for flavor enhancement, commonly in beverages. It may also include sugar, coloring agents, and other additives to improve taste and appearance.
3.2 Malting
Malting is a crucial process employed in treating cereal grains, such as barley, by inducing germination through soaking in water followed by halting the process through drying or heating with hot air. This technique encompasses two main stages: sprouting and kiln-drying. The term “malt” encompasses several products of this process:
1. Malted grains: These are grains, like barley, that have undergone the malting process.
2. Malt sugars: These are sugars, predominantly maltose-rich, derived from malted grains, often utilized in baking, such as baker’s malt.
3. Malted milk products: These include beverages like malted milkshakes, made using malted milk.

4.1 Introduction
Human milk widely acknowledged as the optimal source of nutrition for infants, providing a rich array of components crucial for their growth, repair and development. However, the composition of human milk can vary
significantly within and between feeds, throughout the day, over the course of lactation, and among different mothers and also populations. While this variability is beneficial for infant health and survival, it presents challenges for the management of nutrition of high-risk infants who require precise oversight. The composition of human milk can be altered by factors such as the handling of expressed milk, including how it is stored and pasteurized. Thus, proper management of expressed milk is essential. The recommended practice for infant nutrition is exclusive breastfeeding for the first six months, followed by continued breastfeeding for at least one to two years. Human milk is naturally suited to meet the nutritional needs of infants, providing both nourishment and bioactive compounds that support healthy growth and immunity.
Human milk contains a variety of bioactive components, such as immune cells, anti-infective and anti-inflammatory agents, growth factors, and prebiotics. In contrast to infant formula, which has a fixed nutritional profile, human milk is dynamic and can vary between and within feedings, influenced by maternal factors, environmental conditions, and the methods used for expressing and managing milk.
A thorough understanding of human milk’s composition is vital for effective infant feeding, especially for at-risk infants. It also allows for the assessment of how milk storage and pasteurization may impact its beneficial components. Additionally, some of the bioactive elements in human milk are being studied for their potential use in medical treatments, either as preventive or therapeutic agents.

Experiment No.- 1
AIM
To determine the sucrose content in condensed or evaporated milk using the Lane-Eynon method.
Principle
The Lane-Eynon method is used to measure sucrose in condensed milk by utilizing the reducing properties of sugars. Sucrose, being a non-reducing sugar, is first hydrolyzed into glucose and fructose (reducing sugars). These reducing sugars then react with Fehling’s solution, producing a brick-red precipitate of cuprous oxide (Cu2O) when heated. This allows for the accurate determination of sucrose content after the hydrolysis (inversion) process.
Reactions
• Reaction of Fehling’s Solution
• CuSO4 + NaOH → Cu(OH)2 + Na2SO4
• Cu(OH)2 + Reducing Sugar (RCHO) → Cu2O (brick-red precipitate) + RCOOH
This reaction forms cuprous oxide (Cu2O), a brick-red precipitate. The intensity of this precipitate correlates with the concentration of reducing sugar in the sample, providing a way to determine sucrose content.

1.1 THE IMPORTANCE OF SOILS

Soils are the medium in which crops grow, and so they are essential to the provision of the food and fibre to sustain mankind. But besides the immense importance of this role they are an essential component to life as we know it because of their action as a buffer to control the flow of water between sky, land and sea. They are also a sink, and usually a safe sink, for many of the chemicals that might otherwise make life difficult or unpleasant.

As with other natural resources, it is important that soils are used conservatively, so that the advantages we enjoy from them now can continue to be enjoyed in the future. To do this we need to understand them, to understand the flow of nutrients from soil to plants, and back to the soil or the sea in food chains and water flow. We need to understand the processes by which rocks alter to form soils, and how fast or how slowly the process occurs in different conditions. We need to understand the decay of plant materials in the soil, and how the products of decay help to make the soil a better place for plants to grow.

The chemistry of the constituents of soils, and of the processes by which changes occur, is not simple. Nevertheless we have learnt much about it, and can apply that knowledge to ensure that soils continue their important functions, and are not exploited so that they become infertile, nor used in such a way that the fertile topsoil is lost by erosion by wind or water.

2.1 INTRODUCTION

Textural assessment has long been used to indicate quality in agricultural soil and although it contains an element of subjective judgement, a skilled surveyor can differentiate many grades of texture. Soil texture correlates with the distribution of particle size in the soil, though this is not the only component in texture. Although particle size distribution is an objective attribute of soils and can, in principle, be measured with accuracy, the determination is in practice quite difficult and certainly laborious, so that it is customary in soil mechanical analysis to divide the soil into several broad fractions: sand, silt and clay are the principal categories. The clay fraction, which comprises the smallest particles in the soil, is generally defined as the fraction smaller than a nominal diameter of 2 jam. The practical division is, however, based on the velocity of fall of soil particles through a fluid, calculating the diameter of the particles from the equation of Stokes

3.1 INTRODUCTION

The complete soil organic fraction is made up of live organisms, and their undecomposed, partly decomposed and completely transformed remains. Soil organic matter is the term used to refer more specifically to the non-living components which are a heterogeneous mixture composed largely of products resulting from microbial and chemical transformations of organic debris. These transformations, known collectively as the humification process, give rise to humus, a mixture of substances which have a degree of resistance to further microbial attack.

4.1 INTRODUCTION

It has been suggested that the relationship of surface chemistry to soil science is similar to that of biochemistry to biology. Certainly the fact that surfaces of soil particles are extensive and reactive leads to a dominance of surface chemistry in soil behaviour, but it is not an exclusive relationship, because many precipitation reactions, oxidation and reduction processes, and biological reactions take place more or less independently of the surface processes. Nevertheless it is difficult to understand soil properties fully without an appreciation of the nature and extent of the surfaces of the soil constituents, and this chapter is devoted to a discussion of this topic.

5.1 INTRODUCTION: THE PHYSICAL CHEMISTRY OF COLLOIDAL SUSPENSIONS

This chapter is concerned with understanding the factors which influence the partition of ions between solid surfaces and aqueous solutions. There are many aspects of soil science such as some of those concerned with soil formation, transfer of nutrient ions from soil particles to plant roots, soil pollutant interaction and soil management which are critically dependent on what happens in the space of the order of 1 nm wide between solid and equilibrium solution. A broad survey of the development of ideas on soil-electrolyte interaction shows that there have been two main avenues of approach. One views the soil as an electrically charged surface with its adsorbed hydrated ions as one phase in equilibrium with solution, which is seen as the second phase. The other approach focuses on the electrical double layer extending from the charged solid surface out into the solution. In the latter approach the solid surface, the outer equilibrium solution and the make up of the transition zone between these two phases must all be involved in any detailed consideration of the micro structure of the system. For a full and proper understanding of soil-electrolyte interaction anything less than a detailed analysis of the micro-structure is likely to be inadequate and in this it must be remembered that the interaction between electrical double layers which overlap with one another is likely to be important.

6.1 INTRODUCTION

Water in soils is essential to plant growth, being the medium through which inorganic nutrients are translocated to the root surface and carried through the plant. Most of the water in soils at or near field saturation can be considered as equivalent to bulk water, and only bulk properties need be considered in discussing its movement through soil interstices and its retention in soil capillaries; this is the field with which soil physics deals. But, in the first molecular layer in contact with soil particles, and perhaps for several molecular layers beyond, the behaviour of water molecules is very different from that in the bulk. Strong adsorptive forces can reduce the volatility of these molecules and restrict their mobility. Such an adsorbed layer of water competes with other polar molecules for adsorption sites, and so has an important role in determining the release and retention of fertilizers and pesticides. Such strongly adsorbed layers confer wettability on soils, but hydrophobic surfaces can also be present and these lead to non-wettable soils with serious consequences in run off and inefficient use of precipitation. This region of distinctive molecular interactions between water and soil particles falls within the field of soil chemistry.

The history of evolution reveals that life on Earth has gradually gone enriching itself by adding more and more varieties to it. A variety of organisms as of today exhilaratingly blossoms in the biosphere. The organisms are divided into three broad categories based on their distinctive characteristics, viz. plants, animals, and microorganisms. The other broad categories all the organisms on Earth are placed in are the five kingdoms, viz. Protista, Monera, Fungi, Plantae and Animalia. These kingdoms encompass living organisms based on their cell type (prokaryotic or eukaryotic), cell number (unicellular or multicellular), genetic recombination type (binary fission, asexual or sexual type), or feeding behavior or mode of nourishment (autotrophic or heterotrophic).

Agrobiodiversity is a key resource for humanity. All of the food retirements humanity depends on are fulfilled by agrobiodiversity. Not only this, fodder, fiber, firewood, and many other basic needs of humankind are also met by agrobiodiversity. Human’s dependence on agriculture - not only for survival and sustenance but also for socioeconomic progress, maintenance and celebration of cultural ethos, physical, intellectual, emotional, ethical, and aesthetic development, and psychological contentment and happiness - is inevitable.

Agrobiodiversity is critical for food security for the entire humanity as well as for the food sovereignty of a country. If we are to usher in a sustainable future - that is, a future to be witnessed by healthy, vibrant, and happy humanity (Singh 2019) - there is no choice other than protecting, conserving, and augmenting agrobiodiversity.

All of nature’s biodiversity is not visible. Biodiversity can also not be studied and/ or understood by looking at and analyzing it with the naked eye. A great proportion of the planet’s biodiversity flourishes in the ecosystems not directly accessible to us and the organisms in the sizes our eyes cannot record. The soil biodiversity is more interesting and more varied than we have understood and appreciated. The biodiversity in the soil - together with the physical environment - constitutes what we can call the pedosphere. Biodiversity in the pedosphere is distinguishable from that of the biodiversity above the soil surface. One is nonplussed by an understanding of some of the unbelievable features and functions of the pedosphere biodiversity.

The Convention on Biodiversity (CBD) held on the occasion of the historical Earth Summit in Rio de Janeiro in 1992 underlined the significance of biodiversity conservation for various tangible and non-tangible benefits as well as one of the key factors for sustainability. However, the conservation of soil biodiversity for realizing sustainability

Nutrition is the basis for life to prosper and sustain in the biosphere. There are two modes of nutrition in all species: self-nourishment and crossnourishment. Self-nourishment goes on in the category of organisms known as autotrophs. Cross-nutrition is maintained by the category of consumers categorized as heterotrophs. The autotrophs nourish themselves by utilizing inorganic molecules and energy available in nature, while the heterotrophs derive the nutrients that the autotrophs ‘manufacture’ for themselves. In other words, the heterotrophs derive nutrients from organic molecules. These organic molecules are derived either from the autotrophs directly or from the consumers dependent on autotrophs.

Autotrophs derive energy in its free form (e.g. light) or that available in inorganic molecules (e.g., CO, 

A large number of genetic resources, species, and ecosystems are under severe threat. Many species have gone extinct and many more are being pushed towards extinction. Most of the ecosystems have also gone into what we can call functional extinction. The major factors becoming threats to biodiversity are anthropogenic. Human activities, in essence, are not benevolent for biodiversity to flourish in natural systems. Burgeoning human populations are the root cause of biodiversity destruction. Changing human lifestyles fed by a materialistic economy are further acting as catalysts for the ever-increasing human populations to destroy biodiversity evolved over millions of years amid terrestrial conditions favorable for the origin and prevalence of an astonishing variety of life forms on Earth.

There is hardly any threat to biodiversity due to natural factors except those inherent in the designs of natural evolution. A species at a certain point of time in its evolutionary history is destined to vanish, but the void in nature created due to this loss is filled by the evolution of new life forms. Not only the void is filled, the nature gradually goes on enriching itself 

Most of the ecosystems prevailing on Earth have ceased to be virgin. They are now modified following anthropogenic designs. The Blossoming of a community in its climax stage is a rare sight. As human intervention with nature has gone on increasing, all types of biodiversity - genetic, species and community, and alpha, beta, and gamma - have been put under stress. The Earth has already lost much of its diversity due to anthropogenic factors and now it seems to be under severe stress due to climate change, which is also largely due to human-induced environmental disruptions.

Continuous loss of biodiversity at an alarming rate is posing a serious threat to life on earth. With this dismal state of the environment, we cannot usher in a sustainable future. We do not have the right to snatch the future from our younger generations. The Earth belongs to our children more than it does to us. The Earth belongs to future generations more than it does to present generations. Conservation of biodiversity is a matter of ethics. Ethics has the human face of biodiversity. Economic attributes of biodiversity have importance, but ethics of life 

Sustainability does not denote a fixed state of things. It is a dynamic phenomenon: a phenomenon that tends to advance towards a higher state of being. The range of a journey of sustainability extends from nothing to everything, from a simple system to a more complex system, or from an unstable or less stable system to a stable or more stable system. Speaking in ecological terms, the transformation of unproductive desert land into a forest in ecological climax over time is how the phenomenon of sustainability works.

The term ‘sustainable development’ was first of all used in 1980 in the World Conservation Strategy (IUCN-UNEP-WWF 1980). However, this term was brought into the focus of the world for the first time in the United Nations World Commission on Environment and Development (WCED) Report, popularly known as the Brundtland Commission Report Our Common Future in 1987. Sustainable Development in the WCED Report has been defined as Development that meets the needs of the present without compromising the ability of the future generations to meet their own needs.

The large and diverse livestock resources of India benefit millions of people in rural areas, enhancing their standard of living. The key elements of sustainable agriculture are livestock resources. India has a population of 535.78 million livestock. According to 20th livestock census 2019,India ranks first in the world for the number of buffalo (109.85 million), second in number of cattle (192.49 million), third for the number of sheep (74.26 million), fifth for the number of chickens and ducks (851.81 million), and tenth for the number of camels (2.5 lakhs). About 8.8% of India’s population is engaged by the livestock industry, which provides a living for two-thirds of the country’s rural communities.

A farming system is composed of several farm activities, such as cropping systems, horticulture, livestock, fisheries, forestry, and poultry, as well as the tools the farmer has at his disposal to raise these things profitably. However, a lot of definitions generally express the same concept, which is that it is a technique to achieve profitable and sustainable agricultural production in order to meet the varied needs of the farming community while sparing the natural resource base and environmental quality.

Drivers
• Unique aspects of the local climate and soil.
• Availability of resources and land labor.
• The current level of resource use.
• Economics of the proposed integrated farming.
• Farmer’s management skills

It is the common maintenance of bee colonies by humans in hives made of man-made materials. The majority of these bees are honeybees from the genus Apis, however there are others that make honey, like Melipona. There are also stingless bees kept. A beekeeper raises bees to produce bees for sale to other beekeepers or to collect honey and other goods that hives generate, such as beewax, propolis, flower pollen, and bee pollen, to fertilize crops. An apiary, often known as a bee yard, is a place where bees are kept.

It is believed that efforts to combat poverty and advance sustainable development must include both the development of livestock and energy-related activities The relationship between energy and livestock in alleviating poverty is less clear and has just recently grown increasingly significant, despite the fact that each of these issues has been identified separately(Steinfeld et al., 2006).

The number of people is expected to increase from 7.2 billion to 9.6 billion by 2050. (UN, 2013). This represents a 33% increase in population, but the demand for agricultural products will climb by approximately 70% during the same time period as the global quality of living rises (FAO, 2009). Livestock is essential for ensuring food security.

Integrated farming places a strong emphasis on the fundamental functions of agro-ecosystems, balanced nutrient cycles that are adapted to the demands of the crops, the health and wellbeing of the farm’s livestock, and a holistic management strategy that sees the entire farm as one connected system (Kochewad et al. 2017). Family farming, often referred to as integrated farming, provides the opportunity to profitably utilize the farm family’s available labor to the fullest extent throughout the year, leading to an increase in income and family contentment.

1.1 Introduction

Climate change is evident from the observation of increase in global average air and ocean temperatures, precipitation and extreme rainfall, widespread melting of ice, storms / storm surges flooding and rising global mean sea level, as recorded in the Fourth Assessment Report of IPCC. Eleven of the last twelve years (1995-2006) rank among the twelve warmest years in the instrumental record of global surface temperature (since 1850). 

2.1 Introduction

Agro-meteorological advisories relate the past, current and predicted future weather to agricultural activities. Behaviour of weather both in space and time, considerably affect the agricultural production. Year to year variations in crop production are generally depended to the abnormalities in the behaviours of weather. The mission of the Agromet Advisory Services (AAS) of NCMRWF is to maximise farmers’ profits by decreasing losses due to weather calamities and also by increasing the timeliness of operations in the crop field. An ideal AAS bulletin helps to reduce environmental pollution through the optimum use of chemicals in the crop filed. An ideal AAS bulletin should contain farm management information to weather based agricultural operations and available to the farmers in real time.

3.1 Introduction

One of the most important functions to the AAS units is to widely disseminate the advisory bulletins among the user community. A unit cannot be considered operational unless its bulletins are reaching the target masses. The dissemination is one way communication which is broadly speaking the process by which human beings share information, knowledge, experience, ideas and motivation. 

4.1 Introduction

The livestock/poultry have great capability for climatic adaptation and acclimatization. However in an open environmental condition their overall well-being and efficiency depends on day-to- day weather conditions. While certain breeds of livestock and poultry are considerably flexible to adjust themselves with the varying weather conditions, the others may have little adjustability. This has led to the development of weather/climate based livestock/ poultry management practices which include the general care. Nutrition and health managements for optimizing conditions for best yield in respect of milk, meat, eggs, wool, load carrying capacity etc. have been properly documented. 

5.1 Introduction

Weather is one of the most important factors which determine success or failure of agricultural production. It effects every growth phases and development of plant. During the growing period of the crop, any variability in the weather condition such as delay in monsoon, excessive rainfall, drought, flood, heat or cold wave affects the crop growth and finally reduces the quality and quantity of crop yield. These losses due to weather hazards can be reduced by taking proper crop management in time and by applying accurate weather forecast. Weather forecast also provides guidance for selection of crops and varieties best suited to the local climatic condition. 

6.1 Introduction

One of the key challenges in the 21^st century is that Agromet Advisory Services (AAS) have to respond to an unpredictable and changing climate. In India Gramin Krishi Mausam Sewa (GKMS) is the umbrella project for Agromet Advisory Services (AAS) and it intends to link AAS to different sources of knowledge and innovations to respond to the climate change at root level farmers. The main aim of GKMS is to create effective, efficient and synergistic linkages to improve the delivery of these AAS to the farmers. GKMS works under the frame work of India Meteorological Department (IMD) which seeks to enhance the livelihood of every Indian farmer. 

7.1 Introduction

The occurrence of extreme weather events like drought and flood is increasing in Bihar due to climate change. Bihar receives nearly 80% of annual rainfall during June to September which is quantitatively enough for growing most of the crops. However, aberration in temporal and spatial distribution of rainfall makes the crops vulnerable to drought as well as flood. Rainfall is the most important factor for planning of crop production in rainfed areas. The information on annual, seasonal and weekly rainfall of a region is helpful to design different agricultural operations like field preparation, sowing, irrigation, fertilizer application as well as overall crop planning (Singh et al., 2008). Zone I and zone II of Bihar are receiving too much rainfall which causes flood in this region whereas zone III B is identified as rainfed region which has low, erratic and uncertain rainfall pattern with frequent dry spells during the monsoon season. Hence kharif cropping is tricky operation in this region and sudden crop failures is a common phenomenon due to frequent dry spell or early withdrawal of monsoon. In India many scientists studied on rainfall probability pattern (Suchit et al., 2012) and they concluded that rainfall occurrence is certain at greater than or equal to 80 % probability, while 50% probability is the medium limit of certainty and may involve dry spell risk. Based on these climatic and probability factors, the study was carried out for four different locations situated in different agro climatic zones of Bihar for interlinking the rainfall probability pattern with the crop planning pattern in those regions.

A. Mixing and Homogenization

1. I.ntroduction to Mixing and Homogenization

In the food industry, mixing and homogenization are fundamental procedures that are essential to the production of a wide range of food items. To produce the desired qualities and final result with uniformity and consistency, various ingredients are blended. Ensuring product quality, stability, and customer happiness are contingent upon these processes.

Importance of Mixing and Homogenization

Mixing and homogenization are paramount for several reason

A. Novel Dehydration Technologies

Dehydration, the process of removing moisture from food products, is crucial for enhancing shelf life, reducing weight and volume for transportation, and preserving nutritional value. Traditional dehydration methods, such as sun drying, air drying, and freeze drying, have been widely used for centuries. However, advancements in food technology have led to the development of novel dehydration technologies that offer improved efficiency, quality retention, and sustainability.1. Vacuum Microwave Dehydration

Vacuum microwave dehydration is a cutting-edge dehydration technique that combines the advantages of removing moisture from food products while preserving their color, flavor, texture, and nutritional content (fig 1).

A. Non-thermal Processing

Non-thermal processing encompasses a diverse range of food preservation and treatment techniques that do not rely on heat as the primary means of achieving microbial inactivation or quality preservation. Unlike conventional thermal methods such as pasteurization and sterilization, which involve exposing food to elevated temperatures for a specified duration, non-thermal processing methods operate at or near ambient temperatures. These innovative technologies offer several advantages, including the preservation of sensory attributes, retention of nutritional quality, and minimization of detrimental effects on food texture and f lavour (fig 1).

Distillation, leaching, and extraction

A. Distillation

Distillation is a widely used separation process in various industries, including chemical, pharmaceutical and food processing. It is particularly important in the production of alcoholic beverages, essential oils, and purified water. Distillation works on the principle of exploiting differences in the volatility of components in a liquid mixture to separate them based on their boiling points.

Principles of Distillation

Distillation is a time-tested and versatile separation technique employed across a myriad of industries for separating components of liquid mixtures. Its effectiveness lies in its ability to leverage differences in boiling points among the various constituents of a mixture.

Food Plant Hygiene

A. I.mportance of Food Plant Hygiene:

1. Ensures the Safety and Quality of Food Products: Proper hygiene practices within food processing facilities play a critical role in safeguarding the safety and quality of food products. By adhering to stringent hygiene protocols, including thorough cleaning, sanitation, and preventive measures, facilities can effectively prevent the contamination of food products by harmful microorganisms, chemicals, or physical hazards. This helps minimize the risk of foodborne illnesses and ensures that consumers receive safe and wholesome food products. Additionally, maintaining cleanliness and hygiene in food proce

Summary

The main greenhouse gases (GHGs) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O). CO₂ is the principal anthropogenic GHG that affects the earth’s radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310, respectively. CO₂ is responsible for most of the enhanced greenhouse effect of more than 50%, CH₄ for about 10-15% and N₂O for about 8%. The global atmospheric concentrations of CO₂, CH₄ and N₂O have increased since 1750. While CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and N₂O increased from 270 ppb to 319 ppb during the same period. Rich countries and large developing countries account for most of global CO₂ emissions (China 23.5%, USA 18.27%, India 5.83%, Russia 5.72%, Japan 4.04% and European Union 13.98%). A new climate agreement called ‘Warsaw International mechanisms (November 2013) on loss and damage’ agreed to help the poor countries to cope with loss and damage from heatwaves, droughts, floods, typhoons, desertification and rising sea levels. The Warsaw agreement also includes a set of decisions to help developing countries to reduce GHG emissions from deforestation and degradation of forests which is backed by pledges of US$280 million financing by the United States, Norway and the United Kingdom. Projections for global average temperature rise is in the range of 1.1-6.4°C; a doubling of CO₂ (from pre-industrial 280 ppm) and average sea level rise is in the range of 0.18-0.59 m (Meehel et al. 2007) and 0.5–2.4 m (Brown et al. 2013). Hot extremes, heat waves and heavy precipitation events will continue to become more frequent. Projected data show that there is an increasing global trend in the rise of average temperature in all countries, regions or sub-zones; a decreasing trend in average precipitation in most sub-tropical areas and an increasing trend of precipitation in most of the tropical and high latitudes.

Summary

Climate change can affect the quantitative and qualitative status of water resources by altering hydrological cycles, systems and through changes of water quality via chemical and biological contamination. Changes in these variables lead to impacts on all the socio-economic and environmental goods and services that depend on these variables directly or indirectly including water supply, damage to ecosystems, water dependent food production. The most dominant climate drivers for water quantity or water availability are precipitation, run-off and river flows, floods, droughts, snows, glaciers, sea level rise etc. The observed climate change related impacts on world’s water resources/water quantity include increased precipitation at high latitudes and temperate areas and decreasing trends at low latitudes. The annual run-off in some regions may experience increased run-off, such as in high latitudes and large parts of the USA, whereas there has been a decrease in run-off such as parts of West Africa, southern Europe and southernmost of South America. Floods have been the most reported natural disaster events in Africa, Asia and Europe than all other natural disasters and in case of Bangladesh, six extreme floods have occurred in the last two decades. More intense droughts have been reported from Australia, semi-arid and semi-humid regions, western USA and southern Canada, the Sahel. Precipitation is projected to increase at mid- and high latitudes, in the tropics, whereas precipitation is projected to decrease over many sub-tropical areas (North Africa, northern Sahara), tropical Central American (Caribbean) and the Mediterranean. In areas where evaporation rates are expected to increase it would lead to reduced river and stream run-off. In contrast, areas receiving higher precipitation would likely have higher lake and river levels and may experience floods. The annual stream flow in the Murray-Darling basin (Australia) is projected to fall by 10-25% by 2050 and 16-48% by 2100 which would have severe consequences on irrigated agriculture in the region. Rivers depending on the Himalayan glaciers such as the Indus, Ganges, Brahmaputra, Syr Darya and Amu Darya could face water shortages or river run-off due to retreat of glaciers, and this would cause dramatic impact on drinking water supplies, biodiversity, hydropower, industry, agriculture and ecosystems on which about 2.4 billion people in Asia depends. Globally, ground water is the source of one third of all freshwater withdrawals, supplying an estimated 36%, 42% and 27% of the water used for domestic, agricultural and industrial purposes, respectively. The demand for groundwater is likely to increase due to global increase of water use for irrigation and a decline in surface water quality and reduced summer flows in snow-dominated basins. It is projected that climate change (drought, floods) will affect groundwater recharge rates (e.g. floods would increase recharge, drought would decrease recharge).

Summary

Climate change (floods, droughts, rise of temperature and sea level) can directly impact the incidence of water related diseases through effects on water temperature and precipitation frequency and intensity. This chapter focuses on some common water quality related diseases that may enhance due to climate change such as arsenicosis, cholera, cyanobacterial toxins, dengue, diarrhoea and malaria. Arsenicosis is the disease caused by arsenic (As) contamination. As poisoning via groundwater has become a worldwide problem with 21 countries experiencing As groundwater contamination including Bangladesh, India, and China. In Bangladesh, out of 64 districts, As levels in 60 districts have exceeded WHO recommended guidelines of 10 µg/L and in 51 districts it exceeded Bangladesh recommended guidelines of above 50 µg/L. Chronic exposure to As has been linked to carcinogenic effects in both humans and animals. These include cancer of the various skins and internal organs (lung, bladder, liver and kidney) and reproductive and developmental effects; cardiovascular disease; reduced intellectual function in children and mortality. Alternate floods and droughts (due to climate change) have been found associated with the release of As and contamination of groundwater in Bangladesh, therefore may increase the risks of the disease due to rise of extreme events such as floods and droughts. Cholera is a diarrhoeal disease caused by the bacterium Vibrio cholerae. In 2012, WHO reported 245, 3931 cases of cholera in 48 countries, with more than 3,034 deaths with a case-fatality rate (CFR) of 1.2%. The highest cases were from Africa, followed by Latin America and Asia. The epidemic of cholera is reported to be linked strongly with climate change. Changes in temperature, salinity, rainfall and abundance of phytoplankton have been shown to cause an impact on distribution and survival of V. cholerae. In Bangladesh, cholera (cholera-toxin producing strain of V. cholerae) outbreaks are related to plankton blooms and rise of sea temperature.

Summary

Biodiversity (the variety of living things) is fundamental to ecosystem structures and functions, and provide the broad spectrum of goods and services that humans derive from natural systems such as food (e.g. fish), protection from disasters such as cyclones, storms, floods (e.g. mangroves) or maintenance of water quality. Species (biodiversity) respond to climate change either staying or moving out or dying out. For example, the rise of temperature as a consequence of climate change may cause some species to (a) stay in the same environment since they can tolerate to adapt to changes; or (b) may cause some species to move out in a suitable environment (e.g. some species to move pole ward, some up in elevation) or (c) some species (fish) to go deep to increased depths in the oceans to escape heat or warming or (d) may cause some species to die out or get extinct (species with restricted distribution, longer generation time will not be able to migrate or adapt to climate change). A pattern of range shifts such as pole wards and upwards has been documented in hundreds of species of plants and animals and is one of the strongest signals of biotic changes from global warming. These shifts result from two processes: cold-edge expansion and warm-edge contraction. There is now abundant evidence for local extinctions from contractions at the warm edges of species’ ranges or warm edge contraction because the species may have already reached the limits of their climatic tolerance. Investigations conducted reveals that many terrestrial and aquatic species are shifting their geographic ranges in response to rapid changes in temperature and precipitation regimes. For example, many terrestrial organisms are currently shifting in latitude or elevation in response to changing climate. It has been estimated that plants and animals have recently shifted to higher elevations at a median rate of 11.0 m per decade, and to higher latitudes at a median rate of 16.9 km per decade.

Summary

Water security can be defined as reliable availability of water in sufficient quantity and quality to sustain human health, livelihoods, food (agriculture, fisheries and aquaculture) and the environment (biodiversity and ecosystems). Discharge of chemical and biological pollutants (from agriculture, industry and domestic uses) into rivers and development of engineering infrastructure such as dams and weirs over rivers have modified river ecosystems threatening the global water security, water quality and water dependent biodiversity. Climate change (increase in the intensity and frequency of floods, droughts, bushfire and sea-level rise, ocean acidification, etc.) is an additional stress on water security. There is a need to reduce climate change impacts on water security which can be done via adaptations to climate change. Adaptation is adjustment in natural or human systems in response to actual or expected climatic stimuli or their effects, which moderates harm or exploits beneficial opportunities. In other words, the adaptation can be considered as, tackling the effects of climate change. Adaptation to climate change in terms of sustainable use of water may include increasing water availability by developing hydro-basins and transferring water from areas in which it is abundant to areas in which there is scarcity, the reduction of water losses, increasing storage capacity by building reservoirs and dams, rainwater harvesting, improvement of water use efficiency, desalination of seawater, water savings (leakage management, metering, retrofitting existing homes with water efficient products in toilets, showers, baths, using energy efficient dishwashers and washing machines), mandatory rainwater tanks in new and old buildings (for toilet flushing, washing clothes, gardens, car washing), use of recycled or reclaimed water for landscape irrigation or to recharge groundwater aquifers, and to meet commercial and industrial water needs.

We are living in a world that is in a grim state of environmental disruptions. Callous developmental activities resulting in pollution of all environmental components and gradually culminating in global warming, climate change, and species extinction are responsible for triggering the processes of environmental disruption. Pollution of air, water, and soil is rapidly assuming alarming proportions.

The very processes of socioeconomic development are now posing threat to economic progress as well as to human health. Ominous changes in global climate are posing threat to life on Earth. The irony is that the major cause of environmental disruptions is anthropogenic rather than natural. Human’s materialistic progress and environmental pollution in our contemporary world go hand in hand.

Air or atmosphere constitutes one of the integral components of the environment. Among all the environmental components, the air has the highest fluidity. Therefore, the entry of a foreign substance into the air imparts a quick and severe effect on the health of the organisms. Air in the biosphere has a mixture of various gases in a dynamic proportion which is conducive to maintaining the health and sustenance of all living organisms. An alteration in the composition of the atmosphere beyond a certain limit adversely affects organisms’ health, and might even be of more serious consequences for life.

Air pollution, thus, is defined as the occurrence of undesirable gases (e.g., carbon monoxide, sulfur dioxide, etc.) or particles (e.g., suspended particulate matter) in such concentrations that are deleterious to terrestrial life (vegetation, animals, and human beings) and some physical assets, like buildings, statues, and monuments. Air pollution especially affects the health of human beings living in highly modified (anthropogenic) ecosystems, e.g., cities and industrial areas.