eChapters

4.1 General description

Most temperate forest habitats support a small number of animal and tree species with wide geographic distributions, whereas the montane forests support a large number of species with narrow geographic distributions. "For mankind's most prevalent disease, we have a multiplicity of diagnoses, each provided with maximum casualness," Prof Galbrith writes in one of his publications. Poverty is a difficult situation to be in. It would be beneficial if we knew what was causing the problem. Obviously, there isn't a single answer. Many explanations are presented because they include a small amount of truth. However, one reason of poverty is pervasive: the historical or present link between land and people. Food, clothing, and shelter are all provided by the land. Poverty exists if these are not available." This statement by Galbrith, which is relevant for shifting agriculture areas with excessive rains and turbulent rivers, summarizes the genesis and cause of every responsible individual's considerable worry for good land management and soil maintenance. To round out the aspects of this issue, there is need to add 'environment' and 'ecology’ to this.

2.1 Roots and the Rhizosphere

The rhizosphere, the region of soil surrounding plant roots in which soil and microbes closely interact–plays an important role in soil carbon cycling. The rhizosphere is only about 1-2% of Earth’s soil volume but can store up to 30-40% of Earth’s total soil organic matter. Plants secrete organic compounds such as amino acids or enzymes known as root exudates, which are key in recruiting and selecting relevant beneficial microbes to colonize in the rhizosphere (Julie Bobyock, 2023). Studying these microbial-plant interactions is critical to better understand the relationship between plant growth and the role soils play in keeping carbon from the atmosphere. It is the region that is a few distances (2-80 mm) extended from the root system. Rhizosphere zone is the region of intense microbial activity, and it is isolated from the bulk soil that often called as Edaphosphere or Non-rhizosphere.

Plant growth results from interaction of roots and shoots with the environment. The environment for roots is the soil or planting medium, and its importance is often not appreciated beyond the physical and nutritional aspects. Roots do provide structural support for the plant, and they absorb water and nutrients, but they also produce plant growth-regulating substances, such as cytokinins. The cortex of the root is largely starch storage tissue, and represents a transition zone from the soil to the stele. The cortex also provides a niche to be occupied by mycorrhizal fungi. It is not as generally appreciated, however, that roots also support the growth and functions of a complex of microorganisms that can have a profound effect on the growth and survival of plants. These microbes interact in the soil around the root that is influenced by root exudates; this zone is called the rhizosphere. The effects of rhizosphere microorganisms on plant growth or health often are ignored unless the microbes weaken or kill the plant through disease. There are, however, beneficial interactions that can occur and be enhanced if actively managed by the grower. Establishment and maintenance of rhizosphere microbial populations is a dynamic process affected by age and kind of plant, nature and treatment of soil, environmental factors, foliar applications of chemicals, and interactions of microorganisms. It is important to remember that selective or preferential development of rhizosphere populations occurs in the early stages of plant growth and root development when root exudation is maximal but, thereafter, is altered and maintained at some microbial equilibrium by both microbial and plant activity, with both being influenced by edaphic and other environmental factors.

In previous Chapter, a list was furnished mentioning common names, botanical names, family and types of the all plants mentioned in the Ramayana. The purpose was to know the total number of plants and trees mentioned besides providing reference of the Shlokas as well. This information led to identification of the plants and trees but details about their morphological and floral characters were not mentioned. Therefore, in this Chapter details of the trees and other plants have been provided. This will help to know all about their botanical standing, conservation status, nativity, morphological and floral characters so that one can know the full details including present-day status, availability and importance (Cowen, 1950; Randhawa, 1983; Roy, 2015; 2024).

1. Botanical Name: Adenanthera pavonina L.

Synonym: Adenanthera gersenii Scheff.

Common Name: ‘Red Bead Tree’, ‘Curly Bean’, ‘Red Sandal Wood’

Family: Fabaceae

Nativity: India, Sri Lanka, Southeast Asia to Queensland

Conservation Status: Common (Not Threatened)

Type: Tree

Morphological and Floral Characters: Red Bead Tree is a timber tree found wild in India. Leaves compound, bipinnate, green when young, turning yellow on maturity. Flowers small, yellowish, grows in a dense, drooping almost cat tail like flower-heads. Fruits curved pods, hanging, green that turn brown, coil up and split open on ripening, showing small bright red seeds which are attractive, used as beads in jewellery.

Ajowan is a profusely branched winter annual herb, seed oil of which is a major source of thymol, being present to extent of 35-60%. Ajowan oil is aromatic, stimulant and carminative.  It possesses antimicrobial activity. Ajowan seeds are employed either alone or in combination with spices and condiments. It is used in pickles, confectionery and beverages.  It is a good remedy for indigestion.  A paste of crushed fruit is applied externally for relieving colic pains.  It is also used in lotions and ointments.

A. Soil Sampling

Soil is a store house of several nutrients. These are present in available and reserve forms and a dynamic equilibrium always exists between these forms of nutrients in soil. If the available form of a given nutrient element is depleted by crop uptake or by any other means, there will be immediate replenishment from the reserve source. In this context, it is also appropriate to note that soil is not an eternal source of plant nutrients. In a bid to produce more, soils are exploited very badly and they are gradually becoming deficient in several nutrients. There are several soil related constraints coming in the way of achieving sustainability in crop production.

Cells are the Working Units of Life

With the possible exception of viruses, every form of life on Earth either is a cell or composed of cells. All cells come into existence through the activity of other cells.

All Cells are either Prokaryotic or Eukaryotic

All cells can be classified as prokaryotic or eukaryotic. All plants, animals, fungi, and protists are either single eukaryotic cells or are composed of eukaryotic cells. Prokaryotic cells are either bacteria or archaea. Eukaryotic cells have most of their DNA contained in a membrane-lined nucleus, whereas prokaryotic cells do not have a nucleus. Eukaryotic cells also have more specialized structures, called organelles, than do prokaryotic cells. All prokaryotes are single-celled, whereas many eukaryotes are multi-celled.

The Eukaryotic Cell

There are five principal components to the eukaryotic animal cell: the nucleus, other organelles, the cytosol, the cytoskeleton, and the plasma membrane. Organelles are “tiny organs” within the cell that carry out specialized functions, such as energy transfer and material recycling. The cytosol is the fluid in which these organelles are immersed (The cytoplasm is the region of the cell inside the plasma membrane but outside the nucleus.) The cytoskeleton is composed of several groups of proteins that give the cell support and facilitate transportation of cellular elements. The plasma membrane is the chemically active outer boundary of the animal cell. Plant cells have a plasma membrane that has, outside of it, a cell wall.

7.1. Introduction

Like all other living organisms such as humans, animals, and microorganisms, plants also need elemental nutrients for their growth and development. They assemble the nutrients from soil, water and air. However, to obtain economical crop yield, nutrients are also supplied to the crops from external sources such as chemical fertilizers and manures and using biofertilizers. It is the present-day need to handle the soil fertility status in a more realistic and careful way to obtain maximum crop harvest. Under poor management practices, soil may become infertile and loose its importance in agricultural use. In modern days, huge food demand for the burgeoning human population does not permit to show luxury to use only fertile soil. Moderately fertile soil or even degraded soil should also be managed properly so that they may be used to grow crops. For this, plant nutrients status of the soil plays a significant role along with other soil properties. For sustainable soil fertility management, parameters such as crop to be raised, its nutrient demand at various growth stages, current nutrient status of the soil, amount of nutrient application based on the soil testing results etc are important to be considered. Balanced nutrition to the plants is the prerequisite to obtain maximum benefit. If nutrients supplied to the plants are low in quantity than their requirement, crop production is lowered down. Similarly, if the nutrients are provided in more amount in the soil or unbalanced way through fertilizer or manure applications, total crop yield is suffered. It is a very common example that excess of phosphorus leads to zinc deficiency in most crop plants and it has been observed that excess N is responsible for potassium starvation in potato. Again, excess of iron, manganese, zinc, copper shows plant toxicity. Addition of nutrients to soils in excess also causes environmental pollution when the excess nutrients are lost from soil by leaching, surface run-off and volatilization. Unscientific way of soil fertilization leads to increasing cost of cultivation and imparts adverse effect to the environment instead of doing any good. Therefore, one should have a clear knowledge on soil fertility to obtain a sustainable productivity.

A. Biology, Adaptation, and Host-Seeking Behavior of Predatory and Parasitic Insects

The study of the biological processes, adaptations, and host-seeking behaviors of predatory and parasitic insects is fundamental for enhancing the efficacy of pest management strategies. These aspects are central to leveraging natural predator and parasite behaviors for biological control.

i. Biology of Predatory and Parasitic Insects

The study of the biology of predatory and parasitic insects is a cornerstone in understanding how these organisms function as critical components of biological control programs. These insects play a pivotal role as natural enemies of pest species, with physiological and developmental traits finely tuned for the effective management of pest populations. By examining their complex life cycles, reproductive strategies, and other biological traits, researchers can optimize the use of these insects in integrated pest management (IPM) strategies.

    1.    What is the percentage of water in an adult’s body weight
        a)    50%    b)    60%
        c)    90%    d)    70%
    2.    __________ is a direct reactant in hydrolytic processes of many foods
        a)    Water    b)    Moisture content
        c)    Both a&b    d)    None
    3.    The bond angle of the isolated water molecule (vapor state) is
        a)    109°    b)    104.5°
        c)    109°28'    d)     103.6°

Harvesting and threshing are the key most important operations in the entire range of field operations required in any crop production system. Both of these operations remain still the most important operations as fruit of labour depends upon them. Crops are harvested after normal maturity with the objective to take out grain, straw, tubers etc without much loss.  It involves cutting / digging/ picking, laying, gathering, curing, transport and stacking of the crop.  Harvesting of major cereals, pulse and oilseed crops are done by using sickle whereas tuber crops are harvested by country plough or spade (Fig. 8.1).

SYNOPSIS

This millennium has brought about serious challenges as well as excellent opportunities for the betterment of humanity. The migration of rural population to urban areas is one of the major challenges foreseen. It is expected that much of the population growth is expected to take place in the cities of the developing world. By 2020, about 52 percent of the developing world’s population will be living in urban areas (IFPRI, 1999). The agricultural areas around cities offer great promise to urban and peri-urban agriculture.

The interventions on Urban and Peri-urban Agriculture (UPA) suggested and initiative undertaken by FAO is timely and valuable in the interest of the teeming population demanding for both nutrition and health. The International Conference on Vegetables (ICV-2002) held during 2002 has emphasized the importance of vegetables; FAO International Workshop on Urban and Peri-urban Agriculture for Asian Countries organized during 2005 had amply emphasized the important role of horticulture; and the International Conference on Horticulture (ICH-2009) held during 2009, has amply illustrated the importance of horticultural crops particularly vegetables in UPA for the benefit of urban population.

The urbanization process is a reality that drives people to go and live in the cities. It is very pronounced in Latin America where already 85% of the population lives in cities; in Asia the average is reaching 60% whereas in Africa the phenomenon has started later and has now reached 35%. Besides the increased demand for food, there has been a rapid increase of poverty, unemployment, hunger and malnutrition in the Urban and Peri-urban environment around the world that are of great concern to central and municipal authorities.

UPA can contribute to feeding the urban population, generate income and employment and thereby reduce poverty. In reality many countries have already UPA related activities going on in areas of horticulture including vegetables, dairy production, small livestock, aquaculture and forestry. However, it has been realized that very few countries had actually investigated the real opportunities and constraints linked to the urban agriculture sector.

Keywords : Urban Agriculture, Urban Food, Peri-urban Agriculture, UPA.

The Structure of Proteins

Proteins are composed of building blocks called amino acids. A string of amino acids is called a polypeptide chain. Once such a chain has folded into its working three-dimensional shape, it is a protein. Though there are tens of thousands of different proteins, all of them are put together from a starting set of 20 amino acids. It is the order in which the amino acids are linked in a polypeptide chain that determines which protein will be produced.

3.1 Introduction

Flower and plant part based perfumes are receiving special attention at this modern age of civilization. With pre-eminent senses of smell or taste, a large brain affording a superior intellect, would lead to the use of these abilities to improve the environment, the flavour of food and the smell of the surroundings. In fragrance industry, essential oil is a generic term given to all fragrant extracts such as essential oils, absolutes, resinoids, concretes etc. Since antiquity, flowers and plant parts have been used as flavours for food, for religious rites, for beautification of homes and gardens, as incence and insect repellent, in cosmetics and personal adornment and in medicine. Fragrance compositions are used with the purpose to affect customers through their sense of smell and the job of composing fragrances is left upto an expert known as “Perfumer”.

Despite continuing invention of synthetic fragrant extracts, natural essential oils still remain the most important part of fine fragrance. Essential oils are so aromatic and are the focus of the fragrance industry. The content of a pure essential oil product gives it an unmistakable aromatic and healing quality. Nature has always provided us with food, medicine and fibre for clothing that we need to survive. Sometime a walk in the woods, a day spent swimming in Local River or lake or a beautiful sunset can lift a person’s spirit and give them a new outlook. The aroma of a pure essential oil can do the same.

Flavour and fragrance have now become every day necessities and their demand is constantly increasing across the world. Products from different extraction methods are known under different names even though their basic materials are the same. For instance, orange blossom from citrus aurantium on solvent extraction produces “orange blossom absolute” but that of steam distilled produces “Neroli oil”.

Table 19.1: Reference Guide for Landscape Plants.

1. Carnation is a

 a) Short day plant           b) Day neutral plant

 c) Long day plant            d) None of these

2. Lotus in Sanskrit is known as

 a) Water lily       b) Padma

 c) Kamala           d) Pankaja

11.14. Nanotechnology 11.14.1. Concept • Nanotechnology is science, engineering, and technology conducted at the nanoscale, which is about 1 to 100 nanometers. • Physicist Richard Feynman is considered as father of nanotechnology. The idea and concepts behind nanoscience and nanotechnology started with a talk entitled “There is Plenty of Room at the Bottom” by physicist Richard Feynman at an American Physical Society Meeting at the California Institute of Technology on December 29, 1959, long before the term nanotechnology was used. In his talk, Feynman described a process in which scientists would be able to manipulate and control individual atoms and molecules. Over a decade a later, in his explorations of ultra precision machining, Professor Norio Taniguchi coined the term nanotechnolog

Classification of Living Organisms

The classification of living organisms has passed through several changes and has reached the present stage with the gradual assimilation of more and more knowledge about them. The classification is mainly based on the morphology, anatomy, life style, habits, habitats, metamorphosis and such other characteristics. Though the concept of classification of living organisms was perhaps started by Aristotle between 384 - 322 BC, it was the Swedish Scientist Carl Linnaeus (1788), who presented the classification, which was acceptable to most of the Taxonomists. He propounded the binomial nomenclature of naming each and every organism of animal and plant origin with a genetic and species name. In his classification he was consistent in using Latin names for all the organisms.

• The axial skeleton is comprised of several key structures that form the central core of the animal skeleton.

• This includes the bones of the skull, which encase and protect the brain, the vertebral column or spine, which provides support and houses the spinal cord, as well as the ribs and the sternum, which together form the rib cage, protecting vital organs such as the heart and lungs.

• These components work together to provide structural support and protection for the body’s central organs.

Skull Bones

The skull is a complex structure that varies greatly across different animal species, reflecting their unique evolutionary adaptations, dietary habits, and ecological niches.

Generally, the skull serves several critical functions: protecting the brain, supporting facial structures, and providing attachment points for muscles involved in feeding and expression.

SYNOPSIS

Until recently, agriculture was primarily valued for producing staple cereals. Today, there is increasing recognition that agriculture has an important role to play in improving nutrition, human health and environmental health. Helping agriculture successfully forge links with nutrition and health can enable the research, development and policy communities to more effectively address the looming challenges of hunger, malnutrition and agriculture-associated diseases. Already, there is growing momentum around the world to bring these sectors together to improve food and nutrition security of the world’s poorest people.

Keywords : Food security, nutrition, health, agriculture.

1. INTRODUCTION

During the past fifty years, the world has made substantial progress in improving the food security of millions of people. Using science and technology, agricultural extension and appropriate policies and incentives complemented with infrastructure, farmers, researchers and policymakers have worked together to increase the global production of cereals, cutting the proportion of hungry people from approximately one-third to one-sixth of the world population (Spielman and Pandya- Lorch 2010). Yet more needs to be done. Nearly one billion people still suffer from hunger. Micronutrient deficiencies affect billions more today and potentially in the long-term. Malnourishment in children’s first two years of life, for example, causes largely irreversible damage, impeding their physical growth and intellectual development, increasing their susceptibility to diseases such as diabetes and cancer and even drastically reducing their incomes as adults. Undernourished women are more likely to give birth to smaller babies, thereby creating an inter- generational trap of under nutrition and poverty.

While agriculture has traditionally been put to work to raise the productivity and production of staple crops, there is increasing recognition that agriculture is also key to improving nutrition security, individual health and environmental health. This nuanced understanding has come just in time, considering the looming challenges of hunger, malnutrition, climate change and its link to energy and resource scarcity and urbanization. Placing agriculture in this larger context may enable the global community to better address and cope with these challenges, whilst meeting the food and nutrition security needs of the world’s most vulnerable people.

This paper will briefly review the evolving role of agriculture in meeting food and nutrition security. It will identify emerging challenges, describe promising developments and highlight opportunities for leveraging agriculture-nutrition-health links to overcome challenges.

Computation has become an essential tool in life science research. This is exemplified in genomics, where first microarrays and now massively parallel DNA sequencing have enabled a variety of genome-wide functional assays that require increasingly complex analysis tools. The problem of accessibility of computational tools has long been recognized. Without programming or informatics expertise, scientists needing to use computational approaches are impeded by problems ranging from tool installation; to determining which parameter values to use; to efficiently combining multiple tools together in an analysis chain. The severity of these problems is evidenced by the numerous solutions to address them. Kowledge on software  and web-based interfaces for tools all improve the accessibility of computation. These approaches each have advantages, but do not offer a general solution that enables a computational tool to be easily included in an analysis chain and run by scientists without programming experience.However, making tools accessible does not necessarily address the crucial problem of reproducibility.

This section forms the crux of this research. Here, the data collected as per the research methodology explained in previous chapter has been analysed, results were obtained and discussed. The data were classified, tabulated and then treated with scientific methods to get the results.

After tabulation, the results were interpreted to bring out emphatically the most striking relationship between the variables. The results are presented in the form of tables, graphs and figures.

The findings are presented under the following parts in accordance with the objectives setforth.

Section I : Profile of the study respondents

Section II : Effectiveness of selected learning modules in terms of knowledge gain and symbolic adoption

Section III : Relationship and influence of independent variables towards knowledge gain and symbolic adoption

Section IV : Farmers perception about the Interactive Multimedia Compact Disc (IMCD)

Section V : Farmers opinion regarding utility of the IMCD as a tool for transfer of technology

Section VI : Strategies for better utilization of IMCD

13.0 INTRODUCTION

Cucurbits belong to the family Cucurbitaceae, commonly known as the melon or gourd family. The term cucurbits was coined by Dr Bailey. From nutritional point of view, cucurbit seeds are valued for their high oil and protein contents. Seed proteins and methionine of cucurbits are higher than legumes. Vegetatively propagated cucurbits are pointed gourd, ivy gourd and chow-chow. Long day of 16 hours and high temperature result in maleness. Short day of 9 hours results in femaleness. They are widely distributed in the tropics and warm temperate regions of south, southeast and East Asia, Africa including Madagascar, and central and south America. Cucurbitaceae family is represented by about 117 genera and 825 species. The most common uses of cucurbits are as vegetables and fruits. They are valuable sources of vitamins and minerals. The important cucurbits that are cultivated commercially are cucumber, watermelon, musk melon, long melon, round melon, bottle gourd, bitter gourd, ash gourd, ridge gourd, sponge gourd, pumpkin, squash, snake gourd, pointed gourd, spine gourd, ivy gourd and chow-chow etc. Cucurbits are used as vegetable, salads, dessert and pickle, and for making of sweets.

Vegetable: Bitter gourd, ridge gourd and sponge gourd, round gourd, pointed gourd and pumpkin are used as vegetables. Immature fruits of musk melon are also cooked as vegetable only in some areas.

Salad: Excellent salad is made from cucumber and little gourd.

Dessert: Muskmelon, water melon and cucumber are used as desserts.

Pickle: Cucumber, little gourd and bitter gourd are used for making pickles.

Sweets: Pointed gourd and ash gourd are used for making sweets.

Several products of fruits and vegetables are prepared on commercial and home scale. Products development from fruits and vegetables is the best way to utilize excess produces and save them from post harvest losses..

Value Addition

This is the process of improving the value of a commodity through processing by changing its form, increasing its shelf life or better presentation like packaging. Value addition can be done through the ways.

A cereal is any grass cultivated for the edible components of its grain (botanically, a type of fruit called a caryopsis), composed of the endosperm, germ, and bran. The term may also refer to the resulting grain itself (specifically “cereal grain”). Cereal grain crops are grown in greater quantities and provide more food energy worldwide than any other type of crop and are therefore staple crops. Edible grains from other plant families, such as buckwheat, quinoa and chia, are referred to as pseudo cereals. In their natural, unprocessed, whole grain form, cereals are a rich source of vitamins, minerals, carbohydrates, fats, oils, and protein. When processed by the removal of the bran and germ the remaining endosperm is mostly carbohydrate. In some developing countries, grain in the form of rice, wheat, millet, maize etc. constitutes a majority of daily sustenance. 

3.1 GENERAL DESCRIPTION

Indigenous communities depending mainly on hunting, collection of food from the forests and managing natural resources to meet their requirements, have lived intimately with nature. Shifting cultivation has helped these communities to earn their livelihood for centuries to become to be food secure. Besides being a source of subsistence, the shifting cultivation has also been a repository of agro-biodiversity. Not considering this, the authorities have tried to impose the practice of intensive agriculture on indigenous people for conversion to mainstream agriculture (Singh et al. 2016). The way of life of indigenous people has been grossly impacted by the stress of market oriented development, government schemes, and interventions by some NGOs. The ‘dimensions of shifting cultivation’ not only includes the area under shifting cultivation and the number of shifting cultivators in the world but, various forms, shapes, methods and other aspects of the practice on spatial and temporal basis as well (Fig. 3.1).

During the last 50 years or so, the world has witnessed tremendous changes in terms of population exodus, accessibility to food, advancement in agricultural science and technology, increased food production, efforts in mitigating food and nutrition security, natural and human made disasters and developmental efforts in handling and containing national and global issues. Inspite of these efforts, the challenges which have cropped up are plenty and at the same time creating avenues of opportunities to address those challenges in the interest of humanity. The world is large, countries are many, agro- climatic regions vary significantly, socio-economic conditions are distinct and the national, regional and global issues vary greatly. For ease of presentation and convenience of illustration, common issues only will be dealt in this chapter. Keeping in view the theme of this book, the following topics/issues will be discussed which pose challenges for the living humanity and for future generation within next 50 years. The views are limited to developmental, planning and implementation processes only in order for governments and others to consider overcoming these challenges.

Fat-rich dairy products such as cream, makhan, butter, butter oil and ghee have played a pivotal role in growth and development of dairy industry in India as well as abroad from the time immemorial. The reference of makhan and ghee has been found in old Indian scriptures. Makhan was popularized by Lord Krishna about 5000 years before. In the traditional Indian dietary regimen, milk fat in the form of malai (cream), makhan (freshly churned butter) contributes significantly towards nourishment of people of almost all ages.

Indian dairy industry, over the years, has been converting surplus milk for the manufacture of fat-rich dairy products, especially ghee and butter with skimmilk as a byproduct because of technological and economic reasons. More than one-third of the total milk production is being utilized for the production of ghee and butter wherein milk lipids, the most expensive constituents of milk are conserved and preserved. Milk lipids play many diverse roles, some of which are essential for human health. Many of the desirable flavour and textural attributes of dairy products are due to their lipid components, consequently, butterfat has, traditionally, been highly valued. Significance of fat can also be realized from the fact that the consumer’s perception of food quality is largely based on the perceivable rich taste. Unfortunately, milk lipids are subject to chemical and enzymatic alterations which can cause flavour defects referred to as oxidative and hydrolytic rancidity, respectively. The storage stability of high-fat products is strongly influenced by these changes.

A. General
        
B. Bulbous Plants
        
C. Greenhouse Technology
        
D. Plant Breeding
        
E. Plant Physiology
        
F. Plant Tissue Culture and Biotechnology
        
G. Post Harvest Technology

4.1. Deficiency symptoms in different plant parts

Nutrients are important for growth and productivity of crops. Apart from the N, P, K, Ca, Mg and S, micronutrients such as Zn, Fe, Cu, B, Mo, Mn, Cl, etc. are also necessary for maintaining normal health and metabolism of plants. However, nutrient deficiency can lead to poor and stunted growth of plants resulting in poor yield performances. The depletion of nutrients from the soil is increasing due to adoption of modern agricultural technology through intensive and extensive cultivation of high yielding varieties. Nutrient deficiencies are very common in horticultural crops rather than in field crops.

Identification of nutrient deficiencies in crop plants through visual symptom is the cheapest diagnostic technique. When a nutrient element insufficiency occurs, below the critical level, visual symptoms may or may not appear, although normal plant development will be slowed. When visual symptoms occur, such symptoms can frequently be used to identify the source of the insufficiency.

1. Introduction

The cultivated apple (Malus × domestica Borkh.), is the most important fruit in temperate regions of the world. Apples were frequently used in different mythologies as symbols of immortality or reincarnation. One of the most popular stories attached to apple is that of Adam and Eve, who ate the forbidden fruit from the tree of good and evil which was in the center of the garden of Eden. The Latin word Malus has two meaning i.e. apple and evil, which has probably stemmed from this story from bible. In Greek mythology, mother earth or Gaia, presented a tree with golden apples to Zeus and his bride Hera on their wedding day. These golden apples were later indicated with many stories of love, bribery and temptation ranging from the abduction of Helen of Troy to the defeat and marriage of Atlanta. Goddess Pomona was deity of fruit trees in Rome. In many cultures, garden of paradise and pleasure is symbolized as the place with fruit-laden apple trees. Apple is popular because of its delicious taste and pleasant aroma.

Fruits, nuts and vegetables play a significant role in human nutrition, especially as sources of vitamins, minerals, dietary fibre, and antioxidants. Increased consumption of a variety of fruits and vegetables on a daily basis is highly recommended because of associated health benefits, which include reduced risk of some forms of cancer, heart disease, stroke, and other chronic diseases. Both quantitative and qualitative losses occur in horticultural commodities between harvest and consumption. Qualitative losses, such as loss in edibility, nutritional quality, caloric value, and consumer acceptability of fresh produce, are much more difficult to assess than are quantitative losses. Quality standards, consumer preferences and purchasing power vary greatly across countries and cultures and these differences influence marketability and the magnitude of postharvest losses. Postharvest losses vary greatly across commodity types, with production areas and the season of production. Losses of fresh fruits and vegetables in developed countries are estimated to range from 2 percent for potatoes to 23 percent for strawberries, with an overall average of 12 percent losses between production and consumption sites. In contrast, the range of produce losses in developing countries varies widely. Losses at the retail, food-service, and consumer levels are estimated at approximately 20 percent in developed countries and about 10 percent in developing countries (Adel A. Kader and Rosa S. Rolle, 2004 ). Overall, about one third of horticultural crops produced are never consumed by humans. Reduction of postharvest losses can increase food availability to the growing world population, decrease the area needed for production, and conserve natural resources. Strategies for loss prevention include use of genotypes that have longer postharvest-life, use of integrated crop management systems and good agricultural practices that result in good keeping quality of the commodity and use of proper postharvest handling practices in order to maintain the quality and safety of fresh produce.

A. Biotic and abiotic stresses in spices
1. Black pepper
1a. Challenges of biotic stress in Black pepper breeding
The status and future prospects of breeding for biotic stress resistance in black pepper are essential areas of research due to the significant impact of pests and diseases on black pepper crops. Biotic stress, caused by pathogens, pests, and weeds, can severely affect the yield and quality of black pepper, making the development of resistant varieties a critical objective for breeders.
Current status
1. Research efforts: There have been considerable efforts to identify and develop black pepper varieties that are resistant to various biotic stresses. These include resistance to diseases like Phytophthora foot rot (caused by
Phytophthora capsici), quick wilt, nematode infections, and pest attacks like the pollu beetle.
2. Breeding techniques: Traditional breeding methods have been complemented by molecular breeding techniques. Marker-assisted selection (MAS) is increasingly used to accelerate the development of resistant varieties. The integration of genomic tools has also enhanced the efficiency of identifying resistance genes and their incorporation into high-yielding varieties.
3. Resistance sources: Several resistant genotypes have been identified, but their commercial success is still limited. The genetic diversity within black pepper and related species is explored to find novel resistance genes that can be introduced into cultivated varieties.

Lifespan development examines the physical, cognitive, linguistic, emotional, social, moral and personality changes that occur from conception through old age. This chapter evaluates essential concepts related to prenatal development, infancy, childhood, adolescence and adulthood. It includes developmental stages and tasks, heredity and environment, motor and language development, emotions, play, learning, perception, personality and major psychological theories. Questions address the contributions of Freud, Erikson, Piaget, Pavlov, Skinner, Havighurst and other influential thinkers. The chapter also covers childcare, discipline, parenting, developmental assessment and legal safeguards, enabling learners to revise the fundamental principles governing human growth and behaviour across the lifespan.

4.1 Introduction

Issues of productivity growth and patterns of substitution in the fertilizer sector as well as in other energy intensive industries in India have been discussed from various perspectives. Historical estimates vary from indicating an improvement to a decline in the sector's productivity. The variation depends mainly on the time period considered, the source of data, the type of indices and econometric specifications used for reporting productivity growth. Regarding patterns of substitution most analyses focus on inter fuel substitution possibilities in the context of rising energy demand. Not much research has been conducted on patterns of substitution among the primary and secondary input factors: Capital, labour, energy and materials. However, analyzing the use and substitution possibilities of these factors as well as identifying the main drivers of productivity growth among these and other factors is of special importance for understanding technological and overall development of an industry.In this paper we contribute to the discussion on productivity growth and the role of technological change. We introduce the fertilizer industry in more detail taking into account industry specific aspects such as structural composition, production, technologies, energy consumption within processes, sector specific policies etc. This following we derive both statistical and econometric estimates of productivity growth for the fertilizer sector over time. For the statistical analysis we develop the Kendrick and Solow indices while for the econometric analysis a translog cost function approach using both cross-state and national thime series data is employed. The results are then interpreted within a broader context of structural and policy changes in the sector as well as other sector specific aspects.

4.1. Multiple Choice Questions

1. GoI has indicated ??? crop will be introduced without evaluating biosafety and socioeconomic desirability.
   1. GM
   2. Organic
   3. Rabi
   4. Kharif
2. ??? is AGRI UDAAN.
   1. Food and agribusiness initiative
   2. Food and agribusiness accelerator
   3. Food and agribusiness incubator
   4. Both b and c
   5. All the above
3. Union Minister for Agriculture and Farmer’s Welfare launched --------------------------------------?? quality mark logo at New Delhi.
   1. National Dairy Development Board
   2. National Dairy Development Authority
   3. National Dairy Development Authority
   4. National Dairy Development Programme
4. --------------------------------------?? state is leading in the production of litchi.
   1. Bihar

The practice of official release of cultivars in India started in October, 1964 with the formation of the Central Variety Release Committee (CVRC) at the Central government level and State Variety Release Committee at State Government level. The Central Variety Release Committee functioned up to 1969 when its functions were taken over by the Central Seed Committee (CSC) established under the Seeds Act, 1966. The Central Seed Committee later on bifurcated CVRC and constituted (i) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Agricultural Crops and (ii) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Horticultural Crops to discharge the functions of release/notification, provisional notification and de-notification of cultivars at Central level for field and horticultural crops respectively. State Seed Sub-Committees (SSSC) were asked to discharge similar functions for release at State level. Central Sub-Committee on Crop Standards, Notification and Release of Varieties for Agricultural Crops is responsible for release and notification of field crops. This committee is chaired by ICAR-Deputy Director General (Crop Science). The members are drawn from Directors/Crop Coordinators of ICAR, Directors Agriculture from States, Directors Seed Certification Agencies, Managing Directors of State Seed Corporations, Representatives from Private Seed Companies, etc. 

Insecticide classification majorly divided into three categories. A. based on chemical group, B. mode of entry in the insect, C. based on toxicity.

A. Classification of Insecticides based on chemical group

Historians have traced the use of pesticides to the time of Homer around 1000 B.C. earliest records of insecticide use pertain to the burning of “brimstone” (Sulfur) as a fumigant. Pliny the Elder (A.D. 23-79) recorded most of the earlier insecticide uses in his Natural History and included among these was the use of gall from a green lizard to protect apples from worms and rot. Later, a variety of materials used viz., extracts of pepper and tobacco, soapy water, whitewash, vinegar, turpentine, fish oil, brine, lye and many others. At the beginning of World War II (1940), insecticide selection was limited to several inorganic compounds, arsenicals, petroleum oils, nicotine, pyrethrum, rotenone, sulfur, hydrogen cyanide gas, and cryolite. It was during World War II that opened the Chemical Era with the introduction of a totally new concept of insect control.

34. GEOPHYSICAL METHODS

This chapter gives important and useful methods for measurement of seismic signals.

Firstly a brief introduction of seismic signals is given. The P waves, S waves and L-waves are discussed in short.

The old methods of measuring seismic signals like mechanical geophones are replaced by electronic geophones. The discussion includes Electromagnetic type, Reluctance type, Capacitive type and pressure type of basic geophones. New methods of damping are included. New Recently developed amplifiers and filters are also included. Development in oscillographic elements and cameras are discussed. Other information includes, the recently reported Array Technology and Space Technology for measurement of seismic signals.

8.1 Introduction

After isolation and purification of the compound, it has to be identified. It is necessary to find out the class of the compound first and then to find out the specific compound within the class. The class of compound is usually determined from the colour tests, solubility, Rf properties and UV spectral characteristics of the compound. Further identification within the class depends on measuring physical properties and spectral measurements and then comparing these data with those in the literature. The physical properties include melting point (for solids), boiling point (for liquids), optical rotation (for optically active compounds) and Rf. The spectral measurements include Ultra Violet (UV) , Infra Red (IR) , Mass Spectrum (MS) and Nuclear Magnetic Resonance (NMR). Data on X – ray crystallography of the compound are also useful for identification of the compound.

On completion of the analysis of the spectra obtained, the pieces that have been identified are listed. Then the pieces, the MW and / or molecular formula are checked and the pieces are refined to fit. Finally, the pieces are assembled paying particular attention to ¹H-NMR chemical shifts and coupling patterns. The answer should be checked with the ¹H-NMR data very carefully and it is probably the most critical test to pass. The ¹H-NMR spectrum is potentially the most useful for assembling the structure of the compound.

A known compound can usually be identified on the basis of the above mentioned physical and spectral characteristics. For final confirmation, direct comparison with authentic compound (if available) should be carried out Authentic compounds can be obtained from commercial companies. In the absence of authentic compound, the data from literature can be carefully compared for the identification of the isolated compound. If a new compound is present, all the above data are sufficient enough to identify it. However, data on chemical degradation or laboratory synthesis of the compound are necessary to confirm the identification of the new compound.

1. GENERAL FLORICULTURE

Development of Floriculture’ was recommended by Dr. P.P. Trivedi committee.

India ranks 2^nd in flower cultivation next to China.

The production of loose flowers almost tripled between the 8^th Plan and the 11^th Plan.

The annual domestic demand is valued at around 60 billion USD.

About 2,33,000 hectares across the country was used for floriculture, producing 17,29,000 metric tonnes (MT) of loose flowers and 76,732 lakh cut flowers.

India has exported 22,947.23 MT of floriculture products to the world for worth of Rs. 460.75 crores in 2014-15.

The share of exports of dried flowers and plant parts are 45%, flowering plants (22%), fresh foliage (13%), fresh cut flowers (10%), live plants (7%) and bulbs and tubers (3%).

India’s share in global floriculture trade- 0.6%.

After isolation and purification of the compound, it has to be identified. It is necessary to find out the class of the compound first and then to find out the specific compound within the class. The class of compound is usually determined from the colour tests, solubility, Rf properties and UV spectral characteristics of the compound. Further identification within the class depends on measuring physical properties and spectral measurements and then comparing these data with those in the literature.

Obesity: A condition characterized by the excessive accumulation and storage of fat in the body. It is a physiological disorder having high body mass index (BMI), which can be expressed as a mathematical formula in which a person’s body weight in kilogram is divided by the square of his or her height in meters.

Objective Methods of quality evaluation: These are based on recognized standard scientific tests to any sample of the product without regard to its previous history. They represent the modern idea in quality control (QC) because the human element has been excluded. This method divided into three groups like physical, chemical and microbiological. The devices are used in this evaluation.

Obligate anaerobes: These microbes do no grow inthe presence of oxygen.

Obligate parasite: Obligate parasites is host specific and grows on living host only and attach limited range of host and are very difficult or impossible to grow on artificial culture/media.

Obligate thermophile: These microorganisms grow at a temperature between 38 80oC.

Oedema / edema: It is an abnormal infiltration and excess accumulation of serous f luid in connective tissue or in a serous cavity. Oedema meanswatery swelling of plant organs or parts. It is also called dropsy.

Orchids are perennial ornamental crop, grows well in shady and humid places in wild habitat. The same growing conditions can be achieved by making special structures known as orchidaria or orchid houses.
Basics for Orchid House Cultivation
The following points should be considered during the construction of orchid houses:-
    ·    Topography of land.
    ·    Climate of region.
    ·    Type of soil and water.
    ·    Accessibility of area, transport and marketing facilities.
    ·    Proper drainage facilities.
    ·    Availability of good quality irrigation water.
    ·    A good infrastructure like availability of electricity.

Sustainable agriculture can be defined as a tool of using the natural resources for meeting the present needs without jeopardizing the future potential, increasing per capita productivity without causing degradation of soil and water resources, enhancing profitability without reducing total production and reducing excessive dependence on off farm inputs. Thus the holistic view of sustainability is an approach which is ecologically sound, economically profitable and socially equitable. Theoretically this is an ideal concept and of recent origin. But the real danger to sustainable agriculture stem from the compelling needs of increasing population for food, fuel, fodder on one hand and limited natural resource base of land and water on the other.

Characterisation of Natural Resources

The objective of food security can be met by promoting sustainable agricultural production systems. Increasing agricultural production should not be at the cost of degrading soil and depicting the water bodies. If the basic needs of people are to be met on a sustainable basis, the earth’s natural resource base must be conserved and enhanced. In other words, for food security and sustainable livelihoods, ecological security is necessary. Areas under ecological stress need attention, pressure on natural resources increases with population increase in order to fulfill the demand.

Methods of Analysis

Organic material especially, seeds, grains, fruits and nuts contain mainly three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for the quality as well as their commercial value.

The composition and quality of grains and other plant products vary with respect to their genetic background, location or the soils under which they are grown, season or the environment, the maturity of the grain/product or its harvest stage and the post harvest processes including storage etc. Crop scientists have in recent years been bringing out made to order or designer seeds, whose quality and composition need to be examined to satisfy the needs of the quality conrol and consumer requirements. Keeping this aspect in view this chapter has been designed.

As this book deals with oilseeds, emphasis has been placed on methods of evaluation relating to thier composition and quality. This chapter deals with methods of oil, protein and sugar analysis. Oil being the major constituent of oilseeds, importance has been given to methods of oil quality evaluation including fatty acid profile. Antinutrients especially aflatoxins, glucosinolates, ricin, oxalate, phytic acid, oligosaccharides, etc. also find a place. Analytical methods of some vitamins and minerals have also been included. Only a few important and most essential procedures relating to oilseed quality have been presented. The analyst can find more details and methods of evaluation of other constituents in standard laboratory analytical manuals.

Soil fertility is defined as the quality that enables the soil to provide proper nutrient compounds in proper amounts and in proper balance for the growth of specified plants. Soil fertility is also defined as the ability of soil to supply adequately the nutrients normally taken from the soil by plants.