eChapters

Ours is a Living Planet because ours is a Water Planet. The health of the Living Planet depends on the health of its water resources. Ironically, the health of its water resources is at stake. And so of its life! The waters of the Earth are in the grips of pollution. Much of the water is already polluted and the rest is increasingly becoming polluted. Water pollution, indeed, is one of the worst problems life on Earth is faced with. Water pollution is halting human progress and is phenomenally affecting all walks of human civilization. Water pollution is even putting a question mark on our sustainable future. This chapter presents the causes, magnitude, and consequences of water pollution and also suggests ways and means to prevent and control water pollution and also attempts to manage water resources.

Life on Earth is rooted in soil. Soil is not just a substratum anchoring the plants and giving a base for all terrestrial animals. It is the largest terrestrial ecosystem, and one of the most wonderful ecosystems on Earth. It inhabits most microorganisms. Microbial populations flourishing within the soil have greater biomass than all the human beings, elephants, and whales put together. It is due to the microorganisms that the soil constitutes the most active ecosystem on Earth.

The health of the soil is crucial for the health of all the plants growing on it and for all the animals dependent on it for their inhabitation and nourishment. Soil health is also critical for the well-being of numerous microorganisms, detritivores, and several other organisms. Soil is composed of all essential nutrients/ minerals, air, water, and organisms in a proportion that strikes its ecological balance and maintains its structure and functions revealed through its productive potential.

Soil, like all other ecosystems, is itself a dynamic ecosystem. Its composition keeps changing but natural inbuilt mechanisms help strike a balance and recover 

A sound is a form or energy. Therefore, it has to have an impact on life in one way or the other. Most of the organisms of Kingdom Animalia communicate with each other creating a peculiar sound. Creating sound is inevitable for performing various life activities. Every animal species has the characteristic sound it reflects through its behavior. Whatever all the animals communicate through creating specific sounds is all-natural. Nature, as such is a stupendous repository of a diversity of sounds, all being specific characteristics of life.

Human behavior, however, is highly evolved in terms of creating a variety of sounds. Communication, entertainment, and many behavioral activities are expressed through creating distinctive sounds. There is a difference between natural sounds and the ones human beings create or can create. Humans often generate sounds, not just in a natural manner, but also with various technical aids, that often become unpleasant what we call noise. Creating noise, or noise pollution, seems to be an exclusive characteristic of the human species. Of course, there could be some natural sounds that might occasionally cause havoc to life. Examples are the sounds generated at the time of the volcanic eruption, during an earthquake

Radioactive pollution is largely attributable to radioactivity, a natural property of certain elements, such as radium, uranium, thorium, etc. of spontaneously emitting protons (alpha particles), electrons (beta particles), and gamma rays (short-wave electromagnetic waves) through the disintegration of their atomic nuclei (nuclides).

An alpha particle consists of two protons and two neutrons, which is akin to a helium nucleus. Alpha particles travel at a very slow speed, whereas gamma rays propagate at the speed of light. The alpha particles have less penetration power than the beta and gamma rays. In human tissues, alpha particles can penetrate up to a depth of about 0.005 to 0.008 cm. The gamma rays, on the other hand, are the most penetrating and can easily pass through a human body without striking anything in between. The high penetration power of gamma rays is because they have no charge; therefore, they do not interact with anything as the charged alpha particles would do

Global warming is the hottest issue facing life in our times. The gradual average increase in air temperatures near Earth’s surface over the past one to two centuries is leading to the phenomenon called global warming. It is this global phenomenon that triggers climate change, threatening the entire life on Earth. Earth’s climate has changed over all conceivable geological timescales, but that was all on account of the natural phenomenon. But, human activities are making the phenomenon more pronounced since the beginning of the Industrial Age, now emerging as a dominant triggering factor in influencing the overall climate fabric of the planet.

A. History, Principles, and Scope of Biological Control

Biological Control

Biological control, defined as the use of living organisms to reduce the population of pest species, stands out as one of the most successful, cost effective, and environmentally friendly methods of pest management. This natural process is intrinsic to maintaining ecological balance and supporting the greenery of our planet by enabling plants to produce the necessary biomass to sustain diverse forms of life.

The Essence and Impact of Biological Control

Biological control is an omnipresent force in both natural and human-made ecosystems, constantly active without any human intervention. Its origins trace back over 500 million years with the evolution of the first ecosystems. The process involves naturally occurring reductions in pest populations, which historically, have allowed for the flourishing of plant life critical to the earth’s ecological systems. Without these biological control mechanisms, the amount of energy produced by plants would be a fraction of current levels, drastically reducing the earth’s capacity to support life.

A. Biology, Adaptation, and Host-Seeking Behavior of Predatory and Parasitic Insects

The study of the biological processes, adaptations, and host-seeking behaviors of predatory and parasitic insects is fundamental for enhancing the efficacy of pest management strategies. These aspects are central to leveraging natural predator and parasite behaviors for biological control.

i. Biology of Predatory and Parasitic Insects

The study of the biology of predatory and parasitic insects is a cornerstone in understanding how these organisms function as critical components of biological control programs. These insects play a pivotal role as natural enemies of pest species, with physiological and developmental traits finely tuned for the effective management of pest populations. By examining their complex life cycles, reproductive strategies, and other biological traits, researchers can optimize the use of these insects in integrated pest management (IPM) strategies.

A. Mass Production of Quality Bio-control Agents: Techniques, Formulations, Economics, Field Release/Application, and Evaluation

Biological control agents, such as phytophagous insects, play a significant role in integrated pest management by targeting and suppressing weed populations naturally. Effective utilization of these agents requires understanding their mass production, formulation, economics, field release/application, and evaluation.

Techniques for Mass Production of Bio-control Agents

Mass production of bio-control agents involves rearing insects or other organisms in large quantities while maintaining their effectiveness and quality. The following are key techniques used in mass production:

1. Laboratory Rearing: Laboratory rearing of bio-control agents is a meticulous process that ensures the continuous production of high quality insects under controlled environmental conditions. This technique involves creating optimal conditions for temperature, humidity, and light to simulate natural habitats. Nutritional requirements are met by providing specific diets, which can be natural or artificial, tailored to the needs of the bio-control agents. Breeding protocols are established to manage mating, egg-laying, and larval development cycles efficiently. By controlling these factors, laboratory rearing ensures a stable and sustainable supply of bio-control agents for field application.

A. Successful Biological Control Projects

Biological control, the use of natural enemies to manage pest populations, has seen numerous successful implementations globally for example:

1. Control of Cottony Cushion Scale (Icerya purchasi)

The case of the cottony cushion scale, Icerya purchasi, in California's citrus orchards serves as a seminal example of biological control's efficacy. Originating from Australia, this pest posed a severe threat to the burgeoning citrus industry in California in the late 19th century. The story of its control through the introduction of natural enemies is not only a landmark in biological control history but also a demonstration of ecological problem-solving.

Background and Impact

Icerya purchasi is a sap-sucking insect that infests a wide range of host plants but shows a particular fondness for citrus trees. The infestation is damaging as the scale excretes a sticky substance known as honeydew, which promotes the growth of sooty mold, impairing photosynthesis and weakening the plants. The severity of the infestation threatened the economic viability of the citrus industry in California during the 1880s.

The word “Veterinary” has originated from Latin “veter?n?rius” concerning draught animal and “Medicine” from Middle English, Middle French, Old French and Latin words meaning “healing”. Veterinary medicine is the offshoot of the medicine dealing with the diagnosis, treatment and prevention of diseases/disorders of all animal species including domestic, wild and exotic, companion, draught and pack animals. CONTRIBUTION OF VETERINARY MEDICINE • Reduction in number of cases of tuberculosis and brucellosis in human. • Development of safe and effective vaccines to prevent and control of animal diseases such as Rinderpest, Foot and mouth, Hemorrhagic septicemia, Black quarter,  Pox, Parvo, Distemper,

The concept of health and diseases is essential to veterinary medicine. Understanding    of    such    concepts    provides    the    basis    of    disease    classification. But     these     concepts     are     rarely     given     precise     definition     in     the     textbooks     of veterinary medicine. HEALTH Health is generally considered as absence of the disease. But it is an incomplete definition.    The    concept    of    health    can    be    split    into    five    categories    viz.    health as normality, health as biological function, health as homeostasis, health as physical and psychological wellbeing, and health as productivity including reproduction. Therefore an animal is stated to be healthy only when it is in a complete state of physical, social and mental wellbeing and not

HYPERTHERMIA Hyperthermia is a condition characterized by elevated body temperature due to increased heat production or absorption, or reduced heat loss   owing to physical cause. Etiology • Physical causes such as exposure to high environmental temperature, severe and prolonged physical activity especially in hot humid condition or    animals    confined    with    poor    ventilation. • Spontaneous hemorrhage in hypothalamus can cause neurogenic hyperthermia. • Severe dehydration affects the heat loss by evaporation and thus can lead to hyperthermia. • Too much muscular activity.

MANIFESTATIONS OF GASTROINTESTINAL TRACT DISEASES Diseases of gastro-intestinal tract may be acute or chronic. Dehydration and shock are the major effects of acute and hyper acute diseases of gastrointestinal tract respectively. While major effect of chronic dysfunction of gastrointestinal tract is exhaustion from lack of food and water owing to loss of appetite (anorexia,). Other manifestations of gastro-intestinal tract diseases are abnormalities of prehension, mastication and swallowing; salivation; diarrhea: constipation and tenesmus; ileus; vomiting; hemorrhage; abdominal pain; abdominal distension; and shock and dehydration. Abnormal Prehension • Prehension   abnormalities may arise from paralysis of jaw muscles and tongue, dentition defects, mouth pain

MANIFESTATIONS OF URINARY SYSTEM DISEASES Urinary tract diseases in farm animals  are generally clinically characterized by        pain    and        difficult    urination    (dysuria);    alterations    in    urine    volume    and    its composition; rupture of the renal pelvis, bladder and urethra; and inadequacy of nervous control of urination. Clinical Signs • Dysuria and abdominal pain are common expression of discomfort owing to urinary tract diseases. Acute abdominal pain is rarely seen in cattle due to sudden distension of renal pelvis (pyelonephritis), ureter or renal infarction. Abdominal pain from urethral obstruction leading to distension of urinary bladder is clinically manifested by tail switching, kicking at belly, straining at urination and grunting. Horses with acute tubular nephrosis may show signs of renal colic (arching back, rubbing perineum and tail head). Dysuria (frequent passage of small amounts of urine with pain) is associated with cystitis, vesicle calculus and urethritis • Uremia is commonly seen in cases of acute renal failure and is manifested

In today’s times, a lot of innovation has come into agriculture. This very hard occupation requires an amalgation of farmers with the scientists. From the rural areas after education the technocrats are moving to the cities and this is creating a great loss to the agriculturists. As the population is growing so is the demand for food. Due to shortage in the storage systems the amount of wastage has increased a lot. It is an important aspect to be looked into. A lot of waste material is seen in the vegetable markets, city markets and near the slums. This causes a lot of pollution and spoils the environment. It is important to know why is it increasing and why the facilities for wastes do not exist.

After the agricultural activities a number of by-products are obtained and these are known as agricultural waste. These include residues of different crops like stalks, straws, leaves, roots, husks and shells. The animal waste is in the form of manure. All these agricultural wastes are free of cost however; they can be utilized as an important resource (Lionel and Arnold, 1931). Agrawal (1998) has mentioned India as the final dumpyard. The wastes obtained from various resources can be converted into heat, steam, charcoal, methanol, ethanol, biofuel, compost, energy, biogas, construction and high valued chemical compounds. Many times these agri-industrial wastes are not completely utilized and either they rot in open areas or are burned in the fields.

3a. Sources and problems of agricultural wastes
3b. Waste Reduction
3c. Waste Treatment
3d. Waste Disposal
3e. Clean Technology

Different Kinds of Agricultural Wastes
Table 1: Common Hazardous Wastes: Community Source

All these methods of utilization and the conversion to useful energies depend on the climate, population density of the area and the basic infrastructure. It is important to work out the market for the products which are produced.
 
Bio-waste management: It needs to take from small actions to the ambitious ones. European Commission proposes to use wastes which could make up to 25% of total energy consumption by 2020. They propose to have directives for the promotion of renewable electricity (Directive 2001/77/EC) and biofuels (Directive 2003/30/EC). The waste production in Europe has gone upto 2 kg per capita per day. Recycling rates are also rising (European Commission, 2017). The Member states must develop a national action plan and outline the national policies to develop existing biomass resources and mobilise new biomass resources for different uses. A European project has studied the amount of renewable energy to be used in 2020. According to them it will be around 195 million tons of oil equivalents (Mton) of biomass which is biodegradable part of MSW. This will be 20% of renewable energy target. It has also been estimated that the amount of bio-energy from the MSW will be 20 Mton, which would account for around 7% of all renewable energy in 2020. This may be available after composting and anaerobic digestion (Atanasiu, 2010).

The possibility of making genetic changes in the laboratory in plants, animals and microbes used in food started almost 10,000 years ago. Along with natural changes taken place during the evolution totally different species have come into existence. This has helped in increased food production with better taste and nutrition. The losses caused by biotic and abiotic stresses from fungi and bacterial pathogens have reduced.

In the Asian and Pacific ‘region, it is China alone which produces the largest quantities of agricultural waste and also crop residues. This is followed by India. From the production of rice, corn and wheat alone 587 million tons of residues are generated per year in China. Maheshwari (2014) has surveyed the proportions of waste that Malaysia generates from the production of rice, palm oil, rubber, coconut and forest products. In Myanmar the crop waste and residues constitute about 4 million tons per year out of which more than half constitutes rice husk.

1-1. Identify the current state of environmental policies in Indian agriculture and the challenges faced in their effective implementation.

1-2. Evaluate the importance of implementing environmental policies and management systems in Indian agriculture to ensure sustainable development.

1-3. Analyze key international standards, such as ISO 14001 and EMAS, and how they can be applied in the context of Indian agriculture.

1-4. Compare and contrast best practices and case studies of companies and organizations that have successfully implemented environmental policies and management systems in Indian agriculture to draw insights and lessons learnt from them.

According to the Indian economic survey of 2018, more than 50% of the Indian workforce is employed in the agricultural sector. Agriculture contributed to 17–18% to the country’s GDP. Agriculture’s share in India’s economy is less compared to the industrial and services sectors. The industrial and service sectors have higher growth rates. The significance of the agricultural sector in India’s economic and social growth goes well beyond. Nearly 60% of India’s families depend on rural incomes. In addition to this, the majority of India’s poor population (around 70 %) lives in rural areas. Also, as the population is growing at a fast rate, food security in India depends on producing cereal crops and in increasing the production of fruits, vegetables and milk to sustain the needs of a growing population. To achieve this we need a productive, diversified, competitive, and sustainable agricultural sector. India is the world’s largest producer of pulses, spices and milk. It has the world’s largest cattle herd and the largest area under wheat, rice, and cotton. India is also the second largest producer of rice, wheat, cotton, sugarcane, farmed fish, sheep & goat meat, fruit, vegetables and tea.

General Aspects About Insects

‘Insects’ are almost ubiquitous. They are found all over the world, in the icy regions of the poles, deserts, forests, mountain peaks, oceans and even in oil wells. They can adopt themselves to any climatic conditions and can live in any habitat where food is available. Insects are mostly small, air-breathing organisms of the animal world. Most of the insects live freely in nature. Many species are wild and harmless to human beings. Many are beneficial because of their role in the ecosystem. Some are a part of the food chains of wild creatures, while others through predation and parasitism hold in check many other species of insects. Insects also play a vital role in pollination. Relatively only a few species are harmful to man and are his chief competitor on earth.

The insect body is made up of multicellular tissues. The body is bilaterally symmetrical and is covered by a hard, chitinous exoskeleton. The chitin at the junction of the segments is thinner and pliable and hence insects can bend their bodies. The exoskeleton is made up of several layers of non-living cells produced from the epidermis. Because of the hard chitin us exoskeleton of the body, the growth of the insect is affected beyond a certain extent. So, to facilitate further growth,, this exoskeleton is cast off a few times and this is known as ‘molting’. The number of moultings in a particular species is more or less constant.

Similar to animals of the higher order, insects also possess all important internal systems of organs necessary for the proper performance of the various vital functions. The most important of the systems are the alimentary or digestive system, the circulatory system, the respiratory system, the reproductive system and the excretory system. The fundamental arrangement of the various organs is more or less similar in all insects and does not exhibit much remarkable variations as seen in the external morphological features. The dorsal blood vessel or heart runs along the median line immediately below the dorsal wall. The digestive system including the alimentary canal and its appendages lie in the middle, below the heart. The nervous chain lies below the alimentary canal and immediately above the ventral wall.

Insects generally reproduce by laying eggs or ‘ova’. The initiation of growth inside an egg, which in most cases is preceded by fertilization, leads to a long series of changes, finally attaining the adult stage and in due course to sexual maturity and finally to reproduction of a new generation. This chain of events from the egg stage to adult constitutes the ‘life history’ or ‘life cycle’ of an insect.

Classification of Living Organisms

The classification of living organisms has passed through several changes and has reached the present stage with the gradual assimilation of more and more knowledge about them. The classification is mainly based on the morphology, anatomy, life style, habits, habitats, metamorphosis and such other characteristics. Though the concept of classification of living organisms was perhaps started by Aristotle between 384 - 322 BC, it was the Swedish Scientist Carl Linnaeus (1788), who presented the classification, which was acceptable to most of the Taxonomists. He propounded the binomial nomenclature of naming each and every organism of animal and plant origin with a genetic and species name. In his classification he was consistent in using Latin names for all the organisms.

Mangroves Definition

A mangrove is tree, shrub, palm or ground fern, generally exceeding one and a half meter in height that normally grows above mean sea level in the intertidal zone of marine coastal environment and estuarine regions of the tropical and subtropical coastlines (Duke 1992). The mangrove is also defined as assemblages of salt tolerant trees and shrubs. Mangroves are taxonomically heterogenous and more related to environment than terrestrial or aquatic plants.

The term ‘mangroves’ is used to define both a group of plants and a community. To avoid confusion, Macnae (1968) proposed the term ‘mangal’ for the mangrove forest community, and the term ‘mangroves’ for the plants. Other terms for the mangrove forest community are coastal woodland, oceanic rainforest, intertidal forest, tidal forest, blue carbon forest, mangrove forest, and mangrove swamp.

Generally, mangrove species are grouped into two types: Exclusive and Non-Exclusive. The exclusive species are limited to the mangrove habitat, and they are also referred to as strict mangroves, obligate mangroves or true mangroves. The non-exclusive species are mainly distributed in a terrestrial or aquatic habitat, but they also occur in the mangrove habitats and they are referred to as semi-mangroves, back mangroves or mangrove associates. Tansley and Fristch (1905) are the first to introduce the criteria to classify mangrove species into true mangroves and mangrove associates. Tomlinson (1986) used rigid criteria to distinguish true mangroves from mangrove associates. In his criteria, true mangroves possess all or most of the following features:

Origin and diversification of Mangroves

Mangroves are quite old, possibly arising just after the first angiosperms (Duke 1992). Based on the fossil evidence and recent molecular studies, it is believed that mangroves originated along the shorelines of ancient Tethys Sea and there was a dispersal along the Tethys seaway westward into the Atlantic and further into the east Pacific (long before the closure of the Panama Isthmus) and eastward into South east Asia and Australia during the Late Cretaceous or early Eocene around 80 million years ago (Duke 2006). Nypa seems to be earliest fossil evidence. However, prior to closure of Tethys sea, around 40-55 million years ago, the mangrove genera - Nypa, Acrostichum, Rhizophora, Avicennia, Pelliciera, Sonneratia, Bruguiera, Ceriops, Heritiera, and Aegiceras - were present around shoreline (Duke 2017). The closure of Tethys Seaway by the mid-Tertiary (34-50 Million years ago) by northward movement of African landmass, created a physical barrier that completely terminated the Atlantic East Pacific (AEP) and Indo-West Pacific (IWP) exchange route, and resulted in subsequent diversifications within the AEP and IWP regions influenced by region-specific events (Ellison et al. 1999; Duke 2006). The plate tectonics and other vicariant events like Pleistocene sea level rise are attributed to the current distribution pattern and disjunct distributions of species within genera. Duke (2017) hypothesised two separate westward dispersal routes in AEP: (i) a southern path along the coasts of West Africa, South America and, (ii) a northern path along the North American east coast, whereas he hypothesised two isolated pathways in IWP towards eastward dispersal: (i) a northern path along the coast to the Middle East, Southeast Asia and, (ii) a southern path along the coasts of East Africa, India, and Australia. Further he noted that collision of India and Australia with Middle East and Southeast Asia respectively, resulted complication in dispersal route. Based on the available records it is presumed that diversification of mangrove plants has largely been driven by three key processes of speciation viz., Allopatric speciation, Peripatric speciation and Parapatric speciation (Duke 2017).

Distribution of Mangroves in India

Mangrove forests in India are found along the coastline of 9 States and 4 Union Territories (Fig. 5). The mangrove habitats are broadly classified into three namely, Deltaic (Eastern Coast Mangroves), Estuarine & Backwater (Western Coast Mangroves) and Insular mangroves (A & N Islands) (Mandal and Naskar 2008). India has a total mangrove cover of 4975 km²; of which, 57% is present along the east coast (Bay of Bengal); 31% along the west coast (Arabian Sea) and the remaining 12% in the Andaman and Nicobar Islands (FSI 2019).

West Bengal

In West Bengal, mangroves are present in Sundarbans, the large deltaic complex of three major rivers, the Ganges, Brahmaputra and Meghna, and 62% of total area is shared by Bangladesh and 38% by India. The Sundarban Biosphere Reserve (SBR), at the confluence of the Bay of Bengal covering an area of 9,630 km², lies between 21°40′N and 22°40′N latitudes and 88°03′E and 89°07′E longitudes, spreading in districts of South and North 24-Parganas in West Bengal, India. The major portion of SBR is designated as Reserve Forest, covering nearly 4260 km² and the area under mangrove vegetation is 2112 km² (FSI 2019). Compared to 2017 assessment there has been a decrease of 2 km² area of mangroves. The mangroves and their associates in the SBR exhibit great generic and species diversity and it is abode to rare and highly endangered flora and fauna, as well as, the only mangrove-tiger (Royal Bengal Tiger - Panthera Tigris tigris) kingdom in the world. Recognizing importance and uniqueness, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared the Indian part of Sundarbans as a ‘World Heritage Site’ in 1987, and also designated the ‘Sundarban Biosphere Reserve’ under the UNESCO Man and the Biosphere (MAB) program in 2001. Recently, Sundarbans has been declared as a Ramasar Site, considering ecological significance. Totally 33 true mangrove species belonging to 21 genera and 13 families have been identified in Indian Sundarbans. Among the mangrove species listed, Rhizophora apiculata, Bruguiera parviflora, Ceriops decandra, Kandelia candel, Aglaia cucullata, Excoecaria indica, Xylocarpus moluccensis, Xylocarpus granatum, Heritiera fomes, Scyphiphora hydrophyllacea, Brownlowia tersa, Nypa fruticans, Acanthus volubilis, Dolichandrone spathacea and Phoenix paludosa are under serious threat in Sundarbans (Kathiresan 2008; Gopal and Chauhan 2006). Particularly Heritiera fomes (locally called Sundari, from which Sundarbans derives its name), Nypa fruticans and Phoenix paludosa are declining rapidly due to the reduction of freshwater input (Gopal and Chauhan 2006).

Mangrove forests are ecologically significant and economically important (Kathiresan 2018). They provide ecosystem services worth at least US$ 1.6 billion each year and support coastal livelihoods worldwide (Costanza et al. 1997). They serve as the nursery, feeding and breeding grounds for crabs, prawns, molluscs, finfish, birds, reptiles and mammals. A large amount of global fish catches (up to 80%) is dependent on mangroves, thereby ensuring the food security of coastal people (Ellison 2008). The mangroves provide firewood, timber, cattle feed, honey, medicines and tourism development. They protect groundwater aquifers from seepage of seawater, thereby ensuring water security for coastal population. Mangrove forests remove coastal pollution particularly toxic heavy metals. They offer coastal protection against the fiery effects of natural calamities such as tsunami, storm surges, cyclone and floods (Kathiresan and Bingham 2001; Kathiresan and Qasim 2005; Kathiresan and Rajendran 2005). The potential of mangroves in carbon capture and sequestration is remarkable in mitigating the impacts of global warming and climate change (Kathiresan et al. 2013, 2014).

Threats

There are sixteen threat factors have been identified from Indian mangroves (Kathiresan 2010). However, habitat conversion for agriculture and aquaculture activities, environmental pollution by upstream anthropogenic activities, Climate change processes (e.g. sea level rise; increasing frequency of cylones, etc.) are the major threat factors for mangroves. Mangroves are able to cope up with short-term oscillations and long-term fluctuations of climatic conditions, but the consequences of global climate change, such as increased extreme events, will have unprecedented effects on biota and threaten the resilience and recovery potential of the ecosystems (Harris et al. 2018; Sippo et al. 2018). Despite conservation measures, the mangroves still experience an annual loss of 0.2-0.7% during 2000-2012 and they remain the most threatened ecosystem of the world (Hamilton and Casey 2016).

INTRODUCTION

Anatomy is the branch of biological science which deals with the form and structure of organisms. The word “Anatomy” is derived from Greek, means cutting apart (Ana –separate, tomy-cut).

The study with unaided eye is Gross Anatomy / Macroscopic anatomy while the study of finer details of structure with the aid of a Microscope is Histology / Microscopic Anatomy.

SCAPULA

OX: It is a flat, triangular bone situated on the antero-lateral part of the thorax. It is directed obliquely downward and forward. It has two surfaces, three borders and three angles.

The lateral surface is traversed by the scapular spine which divides it into the supraspinous and the infraspinous fossae. The spine is rough and tuberous in the middle and is prolonged downwards to form the acromion process (Fig.2.1). The medial surface presents subscapular fossa and its upper part presents anteriorly a triangular rough area and posteriorly a rough line (Fig.2.2).

Skull: The skull of domestic animals has two sets of bones i.e facial and cranial bones. The facial bones are placed in front and cranial bones are placed caudally.

Facial bones: The paired facial bones are premaxilla, maxilla, nasal, pterygoid, lacrimal, turbinates, malar and palatine bones. The unpaired facial bones are mandible, hyoid and vomer.

Thoracic Vertebrae

Ox: Thoracic vertebrae characterized by well developed neural spines, short bodies with capitular facets and transverse processes with tubercular facets for articulation with the ribs (Fig.4.1).

LUMBAR VERTEBRAE

Ox: The lumbar vertebrae are characterized by elongated flattened transverse processes (projecting outwards) and large, strongly curved articular processes (Fig.5.1a). The body is constricted in the middle and expanded at the extremities. The anterior extermity is less convex and posterior is less concave. The posterior vertebral notches are much deeper. The intervertebral foramina are often double in the anterior part of the series and are very large further back.

OS COXAE

Ox: The os coxae or hip bone consists of 3 flat bones i.e ilium, ischium and pubis which fuse together to form the acetabulum.

Ilium: is largest of the 3 parts. It shows three surfaces, three borders and three angels. The lateral (gluteal) surface presents gluteal line parallel to cotyloid border. The medial surface consists of rough medial triangular part, the sacral surface for articulation with sacrum and a smooth quadrilateral part, iliac surface. The iliopectineal line separates these surfaces and bears psoas tubercle in its middle (Fig. 6.1).

Current Status of Seed Production

Organized seed production in India became possible with the formation of National Seed Corporation (NSC) during 1963, which paved the way for a sound seed industry to come as a consequence of the introduction of hybrid technology during 1961-65. The release of high yielding dwarf varieties of wheat and rice by the 1960’s gave further impetus to the growth of the seed industry in the country. For the total area under cultivation of 26.7 m ha and 65 per cent of the area) insect, disease and weeds (10-40 per cent loss) and also poor shelf-life. Hybrid technology have defined solution in several crop plants specially vegetables, cotton, rice etc. with the development of appropriate hybridization and seed production. In 1990-91, the area planted to ‘bought seed’ was about 10.35 per cent. The total ‘bought seed’ was estimated at around 5.91 lakh tonnes valued at Rs 679.80 crores. 

2.1 Rice

Rice is the staple food for the largest number of people on the Earth. According to an estimate, the global rice production must reach 800 million tonne from the present 91.04 million tonne in 2005-06 to meet the demand in 2025. It’s area is 37% of the total area under food grains as against 20% under wheat, another important food crop. But globally it stands next to wheat in harvested area. As the irrigated rice contributes more than 75 per cent of the total rice production, enhancing its yield potential would be key to meeting the global rice requirement for an additional 215 million tonne. To achieve the target yield, rice varieties with a yield advantage of about 20 per cent over popular and widely adapted rice varieties under tropical conditions must be developed. Experience in China, India, Vietnam, Philippines, Bangladesh and several other countries clearly indicates that hybrid rice technology offers readily available option to meet this challenge. 

3.1 Redgram or Pigeon Pea

In any production programme, the importance of quality seed needs hardly be emphasized. In fact, the major bottleneck in the pigeon pea cultivation programme is the restricted or poor availability of quality seeds of the desirable varieties. The seed has been considered as the ‘vehicle of change’. With better attention paid to their interaction among water, fertilizer and seed of improved varieties, the production can be maximized. Although a numbers of improved varieties of pigeon pea have been released since 1970, organized seed production programmes have been rather limited. Most of our national efforts in this direction continue to be centralized on cereal crops like wheat, rice and hybrid millets. Moreover, the benefits of the current research will not reach the farmers unless large-scale seed multiplication programmes are organized.

4.1 Mustard

The principle oil yielding rape seed and mustard sp. cultivated in India are

4.1.1 Land Requirement

Select seed field on which the Brassica sp. was not grown in the previous season unless the crop in the previous season was of the same variety and was grown from certified seed. To avoid disease control it is necessary to fallow a 3-4 year crop rotation so that a given field is selected one in every 3-4 years. In addition select field should be well drained, leveled and suitable for Brassica cultivation.

5.1 Jute Seed Production

Jute ranks secand next to cotton as the most important natural fibre and it recognized as the ‘golden fibre’. Its products being biodegradable and environment friendly in contrast to synthetic substitutes, a renewed interest in this natural fibre has been generated in the recent past throughout the world. Important characteristics of jute fibre are its silky lustures, high tensile strength, low extensibility, considerable heat resistance. Because of its great abundance and shortage of cotton, jute is blended with cotton and jute/cotton blended yarns are produced mainly to take advantage of the lower price of jute fibre (Doraiswamy et al, 1998). Several diversified product is also made from jute. Since currently the paper industry has been using it as a raw material for paper. It is also being used in geotextile. The jute sticks are largely used as fuel and also for making gun powder.

Potato is an important crop of the world and grown in almost all the states in India. Apart from India, potato is grown in more than 100 countries but the intensity of cultivation varies considerably. For example in the Netherlands 19.6% of the total arable land is cultivated with potatoes. The figures for Germany, Peru and USA are 10.1%, 5.6% and less than 1% respectively. India ranks fourth in area (1.29 m ha) and third in production (25.23 m ton) in the world. The productivity of potato depends mainly on the quality and quantity of planting materials and the agronomic management practices adopted. Most of developing countries including India experience release of high yielding varieties, development of adequate agronomic and pest control measures but the gap between supply and demand of good quality adequate quantity seed has to be the major constraint in increasing its productivity. 

Introduction

India’s policy in agriculture sector began in 1950 with a conscious effort to meet out the food needs of Indian population in view of famines but later on shifted to develop the agriculture education and research system for enhancing the productivity of staple crops and develop competent human resource to build skilled man power to strengthen agriculture and solve the problem of food & nutritional security at the nation level (1960,s to 1990,s) to the solution of global problems in agriculture through global solutions (2000,s onward) by forging the regional and global international corporation at different levels.

The closing years of the second decade of 21st century brought one of the most remarkable transitions in the international cooperation for strengthening the agriculture research and education in the history of agriculture in India. In most of the world the transition from a resource-based to a science-based system of agriculture is occurring within a single century.

Science, Technology and Skill Development in 21st Century

In the twenty first century, science and technology are viewed as the drivers of Indian economic growth; and agricultural R&D is expected to play a significant role in the process. Agriculture research and development is being affected by research and development at international level.

Introduction

Women in India constitute nearly half of the population. They contribute 75% to the development of our society as compared to men who only 25%. According to the census 2011, nearly 98 million women in India have agriculture jobs, but around 66.1 million of them are depended on others’ farms as agriculture labours. They are engaged largely in cotton, tea, oil seeds and vegetable production. It is also worth mentioning that from the basic level of work concerning farm related activities to unskilled farm jobs like sowing, transplanting, weeding, harvesting and post harvesting activities like winnowing, processing, storage etc. women are engaged right from the start.

Woman’s contribution to the fisheries sector is 22% according to the FAO. Food security, horticulture, sericulture, livestock production and collection of non- timber forest are some of the allied sectors in which they are involved. They are also involved in other allied sectors which include cattle management, milk and poultry farming, and fodder collection. At the same time, women’s domestic activities include cooking, child rearing water collection from the nearby and far-off places, fuel wood gathering and the overall upkeep of household. Ironically, women face disparities in terms of compensation, their share in properties and in representation in local bodies. Much of their contribution in the food production system as food producers and providers has not received effective recognition. This affects their lives and familial conditions in terms of poor health of children and low educational attainments.

Introduction

Millet is a very important cereal grain that many people around the world eat. In fact, over a third of the world’s population consumes millet. It’s the sixth most produced cereal crop globally. Some common types of millet include Jowar (Sorghum), Sama (Little millet), Ragi (Finger millet), Korra (Foxtail millet), and Variga (Proso millet). Among these, Bajra and Sama have more fat, while Ragi has the least. Millet has been cultivated for thousands of years and is used in many parts of the world. In the past, even the Romans and Gauls enjoyed millet-based porridges. Today, China, India, Greece, Egypt, and various African countries are the major producers of millet. In rural areas, some types of millet, like Finger millet and Sorghum, are eaten by people, while others are primarily used as animal feed. These millets have packed with several beneficial nutrients and play a crucial role in traditional diets in many regions. Compared to commonly used rice and wheat, millet is three to five times more nutritious. While wheat and rice mainly provide food security, millet offers not only food security but also health benefits and livelihood opportunities. It can help manage health issues like diabetes and high cholesterol.

In India, Karnataka is the top producer of millets, accounting for over 58% of global production. Despite its nutritional and health benefits, many people in India are not aware of the advantages of consuming millet. (Upadhyaya et al., 2007). Millets are fantastic crops when it comes to pest management. Traditionally grown millets don’t require pesticides and the land used for millet cultivation remains largely pest-free. Some millets, like foxtail millet, not only resist pests themselves but also serve as natural protectors against pests in storage conditions for other crops like green gram. This means there’s no need for fumigants to keep them safe. It has a treasure trove of micronutrients, including vitamins and beta-carotene, which are now seen as essential as pharmaceutical pills. In the present day, millets are exceptionally superior and serve as a solution to the widespread issues of malnutrition and obesity affecting a significant portion of the Indian population (Singh KP et al., 2012). Millets are rich in essential fatty acids, including linoleic, oleic, and palmitic acids, which are present in their free form. They also contain compounds like monogalactosyl, diacylglycerols, digalactosyl diacylglycerols, phosphatidylethanolamine, phosphatidylserine and phosphatidylcholine in bound forms. Although other fatty acids like arachidic acid, behenic acid and erucic acid are found in millets, they are in trace amounts. Millet oil can be a valuable source of linoleic acid and tocopherols. Additionally, millets are gluten-free and have an alkaline effect in the body. They contain essential B vitamins such as niacin, folacin, riboflavin, and thiamine, as well as phosphorus. These nutrients play a crucial role in energy synthesis within the body.

Introduction

In the middle of the 1900s, the world experienced a big increase in people, leading to a greater need for food. This demand for more food pushed for a farming revolution called the “green revolution.” This revolution used chemicals to help grow more crops and fight plant diseases. But using lots of these chemicals caused problems for the environment and people’s health. Even with all these chemicals, a large amount of food (up to 25% of what’s grown) is still lost to diseases each year. By 2050, we might need to double how much food we make. To do this without harming the environment or health, we’re looking for new ways. Some ideas include making plants that are genetically modified, creating plant varieties that resist pests naturally, and using helpful microorganisms like certain bacteria and fungi. These helpful organisms can be used in different ways, like making soil healthier or protecting plants.

The microorganisms colonizing plant roots generally include bacteria, algae, fungi, protozoa and actinomycetes. Enhancement of plant growth and development by application of these microbial populations is well evident. Among different microbial populations present in the rhizosphere, bacteria are the most abundant microorganisms. Various genera of bacteria, Pseudomonas, Enterobacter, Bacillus, Variovorax, Klebsiella, Burkholderia, Azospirillum, Serratia and Azotobacter, cause a pronounced effect on plant growth and are termed as plant growth promoting rhizobacteria (PGPR). PGPR play a significant role in enhancing plant growth and development both under non stress and stress conditions by a number of direct and indirect mechanisms. Microbes exert key functions in ecosystems being involved in nitrogen fixation, phosphorus solubilization, soil formation, and production of siderophores, plant growth regulators and organic acids as well as protection by enzymes like ACC-deaminase, chitinase and glucanase.

Introduction

Livestock sector has been an integral component of Indian agriculture since time immemorial due to its multifarious contributions to the society in the form of nutrient-rich food products, clothing, drought power, income and employment. India has huge population of livestock. Of the total livestock population of the world, India alone has about one-fifth cattle population. As per the 20th livestock census estimate, total livestock population in the year 2019 was over 535 million. Among the livestock products, milk is the most important. India has a glorious history of outstanding achievement in transforming itself from milk deficit country to world’s biggest milk producer over the span of three decades. With over 300 million bovines and producing over 198 million tonnes of milk in 2019-20, the Indian dairy sector exhibits strong growth potential. Despite COVID-19 induced restrictions, which has thrown the smallholder milk producers from the frying pan to fire, the organized dairy sector showed positive growth rate of around 1% in the last f iscal– the lowest in a decade. Despite these proud boasts, poor productivity potential of Indian milch herd is a major cause of concern that may threat its numero one position in future.

The major causes of low milk productivity in India are both intrinsic (low genetic potential) and extrinsic (poor nutrition/feed management). Empirical studies in India have shown that enhancing quality and quantity of feed and fodder has greater impact than breed improvement on increasing milk productivity (Lalwani, 1989; Gaddi and Kunal, 1996; IAEA, 2006; Roy et al., 2020). The timely unavailability of nutritionally rich feed and fodder is a major hitch that impinges on the productivity growth of farm animals in the country. Nonetheless, with increase in agricultural production over the time, the animal feed availability has also improved, but its supply always falls short of the aggregate demand. At national level, the recent reported shortage in green fodder, dry fodder and concentrates is 11.24%, 23.4% and 28.9%, respectively (Roy et al. 2019), and the scenario is more unnerving in few Indian states where the fodder deficit is above 25% (Fig 1).