eChapters

Set 1

1. Match the followings:

1. (a & i), (b & ii), (c & iii), (d & vi)
2. (a & ii), (b & i), (c & iv), (d & iii)
3. (a & iii), (b & i), (c & iv), (d & ii)
4. (a & iv), (b & ii), (c & i), (d & iii)

Plants that are affected by various abiotic stresses react differently as a result such as the reduction in organ size or a change in the antioxidant enzyme system, and while drought and heat are often studied separately, in nature they often occur together, meaning it is essential to carry out joint studies. Furthermore, and related to the above when we consider high temperature stress, one must always consider the use of water and nutrients by the plant and other physiological functions. The effects of heat stress can also be analyzed by the technique that measures lipid peroxidation in polyunsaturated acids of the plasma membrane. The accumulation of metals in plants, affects the normal processes of plant metabolism. The study shows that there is a relationship between high metal contents in plants and their modified morphology: strong reduction of leaf thickness, modified parenchyma structure, and decreased mitochondria organization were ascertained, although toxic symptoms were apparently absent. Water-deficit stress has a significant effect on plants growth and development, with primary affects on plant structure, leaf morphology and cell ultrastructure. Physiological processes such as stomatal conductance, photosynthesis and respiration are consequently impaired with further implications on the metabolic functions such as carbohydrate and energy production as well as carbohydrate translocation and utilization.

Definition of farmer (National Policy for Farmers, 2001): A person actively engaged in the economic and/or livelihood activity of growing crops and producing other primary agricultural commodities and will include all agriculture operational holders, cultivators, agriculture labourers, share croppers, tenants, poultry and livestock rearers, fishers, beekeepers, gardeners, pastoralists, non-corporate planters and planting labours, as well as persons engaged in various farming related occupations such as sericulture, vermiculture, and agroforestry. It also includes tribal families/ persons engaged in shifting cultivation and in the collection, use and sale of minor and non-timber forest produce.

The scientific horticulture consists of the following divisions. Among them, which division has impact on environment aesthetically and functionally

A. Fruits         B. Flowers

C. Spices       D. Plantations

13.0 Introduction

Cucurbits belong to the family Cucurbitaceae, commonly known as the melon or gourd family. The term cucurbits was coined by Dr Bailey. From nutritional point of view, cucurbit seeds are valued for their high oil and protein contents. Seed proteins and methionine of cucurbits are higher than legumes. Vegetatively propagated cucurbits are pointed gourd, ivy gourd and chow-chow. Long day of 16 hours and high temperature result in maleness. Short day of 9 hours results in femaleness. They are widely distributed in the tropics and warm temperate regions of south, southeast and East Asia, Africa including Madagascar, and central and south America. Cucurbitaceae family is represented by about 117 genera and 825 species. The most common uses of cucurbits are as vegetables and fruits. They are valuable sources of vitamins and minerals. The important cucurbits that are cultivated commercially are cucumber, watermelon, musk melon, long melon, round melon, bottle gourd, bitter gourd, ash gourd, ridge gourd, sponge gourd, pumpkin, squash, snake gourd, pointed gourd, spine gourd, ivy gourd and chow-chow etc. Cucurbits are used as vegetable, salads, dessert and pickle, and for making of sweets.

Introduction to GIS

QGIS (Quantum GIS) is an open-source Geographic Information System (GIS) software has been used to showcase various exercises pertaining to viewing, editing, analyzing, and printing of the geospatial data. QGIS helps to allow the users to easily access and manage geographic data stored in folders on local disks or relational databases available on the user’s network. QGIS supports raster, vector, and mesh layers. QGIS also allows using data from external sources with the help of web services such as Web Map Service (WMS) and Web Feature Service. QGIS is a constantly developing software as anyone can add new features or update existing tools. Newer versions of QGIS are frequently released on the official website. It is a cross-platform software that can be installed in Windows, Linux, and MacOS.

‘Plant disease management’ involves the integration of various measures adopted to protect the plants by preventing them from contact with the pathogenic organisms, preventing the growth of the pathogens causing diseases, preventing sporulation of the pathogens and spread of diseases, destroying insect vectors responsible for transmitting diseases and such other prophylactic and curative measures. The ultimate aim of these measures is to avoid large-scale occurrence of diseases, reduce the severity of diseases and minimizing the losses caused by diseases. In disease management, importance should be given to control all the diseases attacking a particular crop at a particular time, especially those which occur in severe form in all the seasons and cause extensive damage to the crop and yield loss. Each and every crop is subjected to attack by one or more than one diseases. At the same time the control measures for controlling each of the disease may differ. In this respect a knowledge of the pathogen causing the disease, the symptoms of the disease, mode of infection and spread of the disease, the growth stage at which the crop is attacked, interaction between the host (crop) and the pathogen and weather conditions favorable for the occurrence and spread of the disease is absolutely necessary, so as to adopt suitable control measures to combat the disease and to minimize the damage to the crop, and reduce the yield loss.

The occurrence and spread of diseases are very much influenced by the environment, host and the pathogen. When the environmental conditions are suitable for the pathogen and not quite suitable for the host, the incidence of the disease is liable to be more. Further, if the host plants are not maintained properly and are weak, then they are more vulnerable to attack by the pathogen and the disease incidence may be severe. When the inoculum of the pathogen is present abundantly, the chances of attack by the pathogen are also more. Taking these facts into consideration, plant disease management is depicted as ‘manipulation of the disease triangle’ (Fig. 60)

All control measures should be aimed at protecting the plants from becoming diseased and not at curing the plants after they have become diseased. The principal methods adopted for controlling plant diseases are broadly categorized under five different heads viz. :

The livestock sector in India is experiencing fast growth in the present era and plays an important role in the Indian economy. Livestock contributes nearly 25% to the agricultural sector output and growing at an annual rate of 4.3% higher than the growth in agricultural sector as a whole (2.8%). Milk production that had been hovering around 20 million tones in 1960’s increased to 102 million tonnes in 2007-08. The egg production also increased from 0.1 billion to 1.0 billion in the last 25 years. Besides production of milk, meat, etc livestock make important contributions to crop production by supplying draught power and dung manure.

Animal husbandry in India is largely a rural activity. Rapid growth in livestock production is desirable not only to sustain agricultural growth, but also to reduce rural poverty especially when a majority of the land holdings are small. Fifty-eight percent of rural households have land holding of less than 2 ha and another thirty two percent have no access to land. Number of these households is likely to increase due to further fragmentation of land holdings. Livestock are thus an important source of income for small farmers, marginal farmers and landless agricultural labourers in the rural areas of the country. Products like milk and eggs are steady source of cash income, and live animals are important natural assets for the poor, which can be easily liquidated for cash during emergency. Smallholders and landless together control 75% of the country’s livestock resources, and are capable of producing at a lower cost because of availability of sufficient labour with them. These smallholders earn nearly half of their income from livestock sector.

The entrepreneur as a person brings in overall change through, innovationfor the maximum social good. Human values remain sacred and inspire him to serve society. He has firm belief in social betterment and he carries out this responsibility with conviction. In this process, he accelerates personal, economic as well as human- development.

• Pathogen attacks the crop at all stages of crop growth.
• Symptoms appear on leaves, nodes, rachis, and glumes. On the leaves, the lesions appear as small bluish green flecks, which enlarge under moist weather to       form the characteristic spindle shaped spots with grey centre and dark brown margin (Leaf blast).

Moniliformis means ‘like a string of beads’ signifying the arrangement of flowers on the spike. The tree is native of tropical Australia. It is valued for afforestation and beautification. It grows in warm climate under both dry and moist atmosphere. It is a medium-sized, thornless, quick growing, evergreen tree of 13 to 15 m height.

Leaves: True leaves are present only in early seedling stage. The apparent leaves are the modified midrib called phyllode, leathery, sickle-shaped, tapered at each end, up to 18 cm long and 6 cm broad; nerves parallel.

R is a software package / language / environment for statistical analysis and graphics.

It Reads Any Type of Data *.txt, .csv, .dat, etc.), You can also scrape (collect) data from websites and execute SQL queries It Supports Large Data Sets. Reproducibility.  R allows you to add comments to your scripts to make it clear to you and others on what you’re doing as data and analysis are separated in R. As R is fully free you can use the latest version on any / as many computers so you and your student can work on the same version. You can use R on Windows, Mac, Linux, and Unix. Anyone (Including You) Can Contribute Packages to the Community to Improve its Functionality.

You can download R from : http://cran.r-project.org. R has a command line interface and that is a huge hurdle for many users, but believe us you will find that using a command line is also easy. However we strongly recommend the R Studio text editor for working with R scripts (http://www.rstudio.com/ide/download).

INTRODUCTION

Zantedeschia is commonly known as Calla lily. The other names are Arum lily, Aroid lily, Lily of the Nile and Pig lily. They are mainly grown for their attractive, large flower spathes, which are usually produced in the spring and summer and also for their variegated and spotted foliage. They are grown in large quantities by commercial growers because they are commonly used for decoration in Easter and throughout the spring and early summer months. It grows very well in open conditions in warm climate. Regular gardeners may have their bloom in winter, spring or early summer depending upon the temperature conditions maintained in the greenhouse.

Zantedeschia is an excellent cut flower and last a long time in water. There are various species, which produces different coloured flowers. The flower spathes of calla or arum lily (Zantedeschia aethiopica) are white, the spathes of the yellow or golden callas (Z. elliottiana) are yellow, whereas the pink calla (Z. rehmannii) produces lavender red, rose red, violet red or pink spathes. The white arum (common calla) forms large colonies in marshy areas ranging from the coast to an altitude of 2250 m above mean sea level. Thus, they may exist in humid, salt laden air at the coast and freezing, misty mountain grassland at high altitudes and as a result, are very versatile in the garden. The leaves of the calla are very interesting in that they contain water stomata, which can discharge excess water by a process known as guttation. This prevents logging and enables calla lily to grow in wet conditions.

Mango (Mangifera indica)

1. Mango hoppers

(i) Amritodes atkinsoni (ii) Idioscopus niveosparsus and (iii) I. clypealis

Order - Hemiptera

Suborder - Homoptera

Family - Cicadellidae

Nature of damage. Three different species of hoppers are found to cause damage to mango trees. During some years, especially during the months of November-February, when the mango trees come to flowering, the pest appears in large numbers. During the other months, the pests are seen in much lesser numbers in an active form, while the other insects hibernate under the bark of the trees. Even in the peak period of pest occurrence, after a few heavy showers, the number of insects is considerably reduced.

During the cold season, when the trees put out the flower spikes, thousands of hoppers, young and adults appear in large numbers, pierce, suck and feed on the sap from the tender shoots, flower stalks, flowers and buds. This drain of the sap causes the buds and flowers to dry, wither and they are shed in large numbers, as a result fruit production may go down by 25-60 per cent. When a severely infested tree is approached, thousands of hoppers hop or fly about and make a rustling noise, as they dash against the foliage. The hoppers exude a sweet, sticky fluid excretion and this fluid thrown out by myriads of these insects after feeding on the tree sap, wets the soil underneath the trees and on the surface of the leaves of the trees. In case of severe infestation, the fluid may fall down in drops. The secretion attracts scores of flies, bees and other insects, which come to feed on the secretion. The infested tree presents a sickly appearance. The trees get devoid of buds and blossoms. The leaves appear shiny and are covered by ‘sooty mould’, a fungal disease. Thousands of caste skins of the nymphs are found on the shoots and leaves. The continuous damage caused to the trees year after year by the pest makes them loose their vigor gradually and eventually leads to severe reduction in their yielding capacity.

Life cycle of the pest. The female hopper inserts spherical, pale whitish eggs singly into the plant tissues through slits made in the young shoots, flower stalks and flower spikes. The eggs hatch in 4-6 days and the young nymph hatching out of the egg looks quite similar to the adult. The nymphs are very active and move about rapidly along the flower spikes and shoots, suck and feed on the plant sap. They are smaller in size, wingless and unable to fly or jump. The young ones moult their skin a few times during their growth and become adults in 10-15 days. The adult hoppers are small insects, about 3.0 mm. in length with a wedge-shaped body. The head is broader and the body gradually narrowing backwards. The legs are well developed, especially the hind legs. The general color is light greenish-brown. They are extremely active and can fly and hop around. They have a tubular, sucking mouthpart by which they puncture the tender plant parts and floral parts. The adults of Idioscopus clypealis are smaller, with two black spots on the prothorax and a few black spots on the front portion of the head, while those of Idioscopus niveoparsus are slightly bigger with three black spots on the prothorax and whitish, distinct cross bands on the light brownish forewings. The adults of Amritodes atkinsoni are bigger than the other two species, about 5.0 mm. in length, with two black spots on the prothorax. Two or more generations may appear during the flowering season of mango trees (Fig.71).

The potential for significant economic losses from decay caused by postharvest pathogens is greater than is often realized. Harvesting and handling, and the attendant costs for labor and postharvest chemical treatments, can increase the cost of fresh fruits and vegetables several fold from the field to the consumer. Therefore, any produce lost in storage is worth more economically than an equivalent amount lost in the field. Considering economics and the problem of world hunger, it is imperative to understand the importance of postharvest disease and to continually strive to reduce postharvest losses from pathogens. In recent years, many international organizations have identified the necessity of reducing postharvest food losses as an important worldwide goal. While postharvest losses vary from season to season, an average loss of 10% to 30% after harvest is an average estimate. Significantly higher losses are not uncommon in developing countries. The extent of these losses justifies increased research efforts in postharvest pathology (Carl E. Sams, 1994). Chemical treatments and irradiation have effectively reduced the number of microorganisms on various commodities. However, consumer fears associated with chemical residues and the effects of ionizing radiation on fresh produce are forcing the development of alternative protection methods. Also, many pathogens have developed resistance to several commonly used chemicals, while other decaycausing microorganisms currently cannot be controlled by chemicals. Therefore it is better to seek control strategies that will supplement or replace current disease control methods.

2.1 Loose Smut of Wheat

The disease is prevalent in all the wheat growing areas in the world. However, it is a serious problem in humid and sub-humid areas. The incidence of the disease is comparatively more in cooler and humid parts of northern India as compared to the drier and tropical parts of the country. Being a simple interest disease epidemiologically, this is a threat to the cultivation of wheat for seeds. The disease is therefore, dreaded by seed growing agencies who have to treat the seeds with costly chemicals.

INTRODUCTION

Plant diseases need to be managed for maintaining the quality and abundance of food, feed, and fiber produced by growers around the world. Different approaches may be used to prevent, mitigate or control plant diseases. Beyond good agronomic and horticultural practices, growers often rely heavily on chemical fertilizers and pesticides. Such inputs to agriculture have contributed significantly to the spectacular improvements in crop productivity and quality over the past 100 years. However, the environmental pollution caused by excessive use and misuse of agrochemicals, as well as fear-mongering by some opponents of pesticides, has led to considerable changes in people’s attitudes towards the use of pesticides in agriculture. Today, there are strict regulations on chemical pesticidal use, and there is political pressure to remove the most hazardous chemicals from the market.

We do not know when intercropping began nor why early civilizations fostered its use. Whether by design or accident, intercroppinq dominated early agriculture and is still practiced in many areas of the world. With the advent of “modern” agriculture, intercropping began disappearing from many areas. This shift was driven primarily by mechanization and specialization. Despite pressures to abandon intercropping, it has survived and flourished Inereasing interest in sustainability and environrnental concerns have drifted attention back to intercropping as a means of better utilization of resources while preserving the environment.
Through intercropping, farmers can achieve the full production of the main crop and also an additional yield (bonus) associated with an increased plant population of the second component. Hence, intercropping can increase incomes obtained by smallholder farmers in areas where labor is not shortage, through reduction of economic risk and market fluctuation resulting from growing a single crop which is more prone to natural hazards and helping the farmers in better utilization of land by having more than one crop produced per unit area. Though all intercrops produced higher productivity, the farmers could better use the appropriate population of component crops in intercropping systems in order to maximize yield of both crops as well as total productivity. It is, therefore, important to support intercropping systems with appropriate agronomic practices such as timely irrigation, pest protection and the likes to sustain the cropping system in the countries where labor is not problem for proper management in general even though sometimes sole cropping may became more productive.

Appendices
    
I.    Released Varieties/Hybrids in Aromatic Crops from KAU
     P. Skaria Baby, P.P. Joy, Samuel Mathew, Ancy Joseph and Ragina Joseph 
    
IIa.    Released Varieties of Fruit Crops in India
    T. Radha
    
IIb    Released Varieties of Arid Fruits
    S.K. Sharma
    
III.    Released Varieties of Ornamental Plants
    P.K .Valsala Kumari 
    
IVa.    Released Varieties of Coconut
    P. Maheswarappa
    
IVb.    Release Varieties of Cocoa
    P. Maheswarappa
    
IVc.    Released Varieties of Plantation Crops
    P. Maheswarappa
    
Va    Released Varieties of Spices from Kerala Agricultural University (KAU)
    Asha Sankar 
        
Released Varieties of Spice Crops Through All India Coordinated Research Project on Spices
    K. Nirmal Babu
    
Vb    Released Varieties of Spice Crops Through All India Coordinated Research Project on Spices
    K. Nirmal Babu
    
VI    Released Varieties of Vegetables from KAU
    T.R. Gopalakrishnan
    
VII.    Research and Educational Infrastructure in Horticulture in India
    P.G. Sadhan Kumar and S. Nirmala Devi
    
VIII.    Important Websites in Horticulture
    T. Pradeepkumar 
    
VIIIa.    Horticulture Institutes in India
    T. Pradeepkumar 
    
IX.    Vital Statistics on Horticultural Crops
    National Horticulture Board, Gurgaon, Haryana
    
X.    Nutritional Values of Horticultural Crops
        Indian Institute of Nutrition, Hyderabad

I. General information

1. Common names of trees

• Acacia nilotica – Black babool, Indian gum-Arabic tree
• Acacia auriculiformis – Golden shower
• Adansonia digitata – Baobab, Monkey bread
• Adenanthera pavonina – Red sandal wood, bead tree, red wood
• Ailanthus excelsa – tree of heaven, paradise tree
• Albizia julibrissin – Pink siris, silk tree

Introduction

The intergovernmental panel on climate change (IPCC) which takes account of on historical, psychological, social , physical and economic and political perspectives of climate change in its report, released in November 2014 said that the Working Group I contribution to the IPCC’s Fifth Assessment Report (AR5) considers new evidence of climate change based on many independent scientific analyses from observations of the climate system, paleoclimate archives, theoretical studies of climate processes and simulations using climate models. Climate change is not controversial as naysayers and some media would convey. After decades of careful observation, collection of data, and tracking of changes in the climate system, there exists a solid, scientific consensus that human-caused climate change is a reality (Michael, 2012). In their report, the NCSE 2015 says that there is substantial scientific agreement about the occurrence, causes, and consequences of climate change. Yet due to the inherent complexity of the topic and the social controversies surrounding it, confusion and doubt often persist. Here, we need to develop the workforce, education, and training for climate-smart Agriculture. The following are some interventions.

Orchids are perennial ornamental crop, grows well in shady and humid places in wild habitat. The same growing conditions can be achieved by making special structures known as orchidaria or orchid houses.
Basics for Orchid House Cultivation
The following points should be considered during the construction of orchid houses:-
    ·    Topography of land.
    ·    Climate of region.
    ·    Type of soil and water.
    ·    Accessibility of area, transport and marketing facilities.
    ·    Proper drainage facilities.
    ·    Availability of good quality irrigation water.
    ·    A good infrastructure like availability of electricity.

Sustainable agriculture can be defined as a tool of using the natural resources for meeting the present needs without jeopardizing the future potential, increasing per capita productivity without causing degradation of soil and water resources, enhancing profitability without reducing total production and reducing excessive dependence on off farm inputs. Thus the holistic view of sustainability is an approach which is ecologically sound, economically profitable and socially equitable. Theoretically this is an ideal concept and of recent origin. But the real danger to sustainable agriculture stem from the compelling needs of increasing population for food, fuel, fodder on one hand and limited natural resource base of land and water on the other.

Characterisation of Natural Resources

The objective of food security can be met by promoting sustainable agricultural production systems. Increasing agricultural production should not be at the cost of degrading soil and depicting the water bodies. If the basic needs of people are to be met on a sustainable basis, the earth’s natural resource base must be conserved and enhanced. In other words, for food security and sustainable livelihoods, ecological security is necessary. Areas under ecological stress need attention, pressure on natural resources increases with population increase in order to fulfill the demand.

Methods of Analysis

Organic material especially, seeds, grains, fruits and nuts contain mainly three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for the quality as well as their commercial value.

The composition and quality of grains and other plant products vary with respect to their genetic background, location or the soils under which they are grown, season or the environment, the maturity of the grain/product or its harvest stage and the post harvest processes including storage etc. Crop scientists have in recent years been bringing out made to order or designer seeds, whose quality and composition need to be examined to satisfy the needs of the quality conrol and consumer requirements. Keeping this aspect in view this chapter has been designed.

As this book deals with oilseeds, emphasis has been placed on methods of evaluation relating to thier composition and quality. This chapter deals with methods of oil, protein and sugar analysis. Oil being the major constituent of oilseeds, importance has been given to methods of oil quality evaluation including fatty acid profile. Antinutrients especially aflatoxins, glucosinolates, ricin, oxalate, phytic acid, oligosaccharides, etc. also find a place. Analytical methods of some vitamins and minerals have also been included. Only a few important and most essential procedures relating to oilseed quality have been presented. The analyst can find more details and methods of evaluation of other constituents in standard laboratory analytical manuals.

Soil fertility is defined as the quality that enables the soil to provide proper nutrient compounds in proper amounts and in proper balance for the growth of specified plants. Soil fertility is also defined as the ability of soil to supply adequately the nutrients normally taken from the soil by plants.

Introduction

The biggest issue that humanity is currently facing is climate change. due to the increasing use of conventional energy sources. As a result, people all around the world are turning to affordable, clean renewable energy sources. These energy sources include biomass, tidal, solar, and wind energy. All of these energy sources, meanwhile, come with a unique set of challenges (Jeyasubramanian et al., 2021)particulate matter, carbon monoxide, etc. which influence a lot of environmental issues that are hazardous to all living beings including humans. One of the useful methods of using crop residues is in the form of biochar obtained after employing thermo-chemical routes. Apart from the crop residues, the carbon rich contents obtained from forest, animal compost, waste plastics, etc., can be heated in oxygen starved atmosphere, that left char having enriched carbon and trace amount of minerals finds extensive applications in agriculture, especially to make soil more fertile, as a carbon sequestration agent, increases crops yields, etc. This review focuses on the synthetic strategies adopted to obtain biochar, and the numerous applications in various fields. Further, the interactions involved in between the host–guest molecules are explained using computational studies like Density Functional Theory, Artificial Neural Network analysis, Machine Learning methods, and Visual MINTEQ program.

Obesity: A condition characterized by the excessive accumulation and storage of fat in the body. It is a physiological disorder having high body mass index (BMI), which can be expressed as a mathematical formula in which a person’s body weight in kilogram is divided by the square of his or her height in meters.

Objective Methods of quality evaluation: These are based on recognized standard scientific tests to any sample of the product without regard to its previous history. They represent the modern idea in quality control (QC) because the human element has been excluded. This method divided into three groups like physical, chemical and microbiological. The devices are used in this evaluation.

Obligate anaerobes: These microbes do no grow inthe presence of oxygen.

Obligate parasite: Obligate parasites is host specific and grows on living host only and attach limited range of host and are very difficult or impossible to grow on artificial culture/media.

Obligate thermophile: These microorganisms grow at a temperature between 38 80oC.

Oedema / edema: It is an abnormal infiltration and excess accumulation of serous f luid in connective tissue or in a serous cavity. Oedema meanswatery swelling of plant organs or parts. It is also called dropsy.

34. GEOPHYSICAL METHODS

This chapter gives important and useful methods for measurement of seismic signals.

Firstly a brief introduction of seismic signals is given. The P waves, S waves and L-waves are discussed in short.

The old methods of measuring seismic signals like mechanical geophones are replaced by electronic geophones. The discussion includes Electromagnetic type, Reluctance type, Capacitive type and pressure type of basic geophones. New methods of damping are included. New Recently developed amplifiers and filters are also included. Development in oscillographic elements and cameras are discussed. Other information includes, the recently reported Array Technology and Space Technology for measurement of seismic signals.

8.1 Introduction

After isolation and purification of the compound, it has to be identified. It is necessary to find out the class of the compound first and then to find out the specific compound within the class. The class of compound is usually determined from the colour tests, solubility, Rf properties and UV spectral characteristics of the compound. Further identification within the class depends on measuring physical properties and spectral measurements and then comparing these data with those in the literature. The physical properties include melting point (for solids), boiling point (for liquids), optical rotation (for optically active compounds) and Rf. The spectral measurements include Ultra Violet (UV) , Infra Red (IR) , Mass Spectrum (MS) and Nuclear Magnetic Resonance (NMR). Data on X – ray crystallography of the compound are also useful for identification of the compound.

On completion of the analysis of the spectra obtained, the pieces that have been identified are listed. Then the pieces, the MW and / or molecular formula are checked and the pieces are refined to fit. Finally, the pieces are assembled paying particular attention to ¹H-NMR chemical shifts and coupling patterns. The answer should be checked with the ¹H-NMR data very carefully and it is probably the most critical test to pass. The ¹H-NMR spectrum is potentially the most useful for assembling the structure of the compound.

A known compound can usually be identified on the basis of the above mentioned physical and spectral characteristics. For final confirmation, direct comparison with authentic compound (if available) should be carried out Authentic compounds can be obtained from commercial companies. In the absence of authentic compound, the data from literature can be carefully compared for the identification of the isolated compound. If a new compound is present, all the above data are sufficient enough to identify it. However, data on chemical degradation or laboratory synthesis of the compound are necessary to confirm the identification of the new compound.

1. GENERAL FLORICULTURE

Development of Floriculture’ was recommended by Dr. P.P. Trivedi committee.

India ranks 2^nd in flower cultivation next to China.

The production of loose flowers almost tripled between the 8^th Plan and the 11^th Plan.

The annual domestic demand is valued at around 60 billion USD.

About 2,33,000 hectares across the country was used for floriculture, producing 17,29,000 metric tonnes (MT) of loose flowers and 76,732 lakh cut flowers.

India has exported 22,947.23 MT of floriculture products to the world for worth of Rs. 460.75 crores in 2014-15.

The share of exports of dried flowers and plant parts are 45%, flowering plants (22%), fresh foliage (13%), fresh cut flowers (10%), live plants (7%) and bulbs and tubers (3%).

India’s share in global floriculture trade- 0.6%.

After isolation and purification of the compound, it has to be identified. It is necessary to find out the class of the compound first and then to find out the specific compound within the class. The class of compound is usually determined from the colour tests, solubility, Rf properties and UV spectral characteristics of the compound. Further identification within the class depends on measuring physical properties and spectral measurements and then comparing these data with those in the literature.

The practice of official release of cultivars in India started in October, 1964 with the formation of the Central Variety Release Committee (CVRC) at the Central government level and State Variety Release Committee at State Government level. The Central Variety Release Committee functioned up to 1969 when its functions were taken over by the Central Seed Committee (CSC) established under the Seeds Act, 1966. The Central Seed Committee later on bifurcated CVRC and constituted (i) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Agricultural Crops and (ii) a Central Sub-Committee on Crop Standards Notification and Release of Varieties for Horticultural Crops to discharge the functions of release/notification, provisional notification and de-notification of cultivars at Central level for field and horticultural crops respectively. State Seed Sub-Committees (SSSC) were asked to discharge similar functions for release at State level. Central Sub-Committee on Crop Standards, Notification and Release of Varieties for Agricultural Crops is responsible for release and notification of field crops. This committee is chaired by ICAR-Deputy Director General (Crop Science). The members are drawn from Directors/Crop Coordinators of ICAR, Directors Agriculture from States, Directors Seed Certification Agencies, Managing Directors of State Seed Corporations, Representatives from Private Seed Companies, etc. 

Insecticide classification majorly divided into three categories. A. based on chemical group, B. mode of entry in the insect, C. based on toxicity.

A. Classification of Insecticides based on chemical group

Historians have traced the use of pesticides to the time of Homer around 1000 B.C. earliest records of insecticide use pertain to the burning of “brimstone” (Sulfur) as a fumigant. Pliny the Elder (A.D. 23-79) recorded most of the earlier insecticide uses in his Natural History and included among these was the use of gall from a green lizard to protect apples from worms and rot. Later, a variety of materials used viz., extracts of pepper and tobacco, soapy water, whitewash, vinegar, turpentine, fish oil, brine, lye and many others. At the beginning of World War II (1940), insecticide selection was limited to several inorganic compounds, arsenicals, petroleum oils, nicotine, pyrethrum, rotenone, sulfur, hydrogen cyanide gas, and cryolite. It was during World War II that opened the Chemical Era with the introduction of a totally new concept of insect control.

4.1 Introduction

Issues of productivity growth and patterns of substitution in the fertilizer sector as well as in other energy intensive industries in India have been discussed from various perspectives. Historical estimates vary from indicating an improvement to a decline in the sector's productivity. The variation depends mainly on the time period considered, the source of data, the type of indices and econometric specifications used for reporting productivity growth. Regarding patterns of substitution most analyses focus on inter fuel substitution possibilities in the context of rising energy demand. Not much research has been conducted on patterns of substitution among the primary and secondary input factors: Capital, labour, energy and materials. However, analyzing the use and substitution possibilities of these factors as well as identifying the main drivers of productivity growth among these and other factors is of special importance for understanding technological and overall development of an industry.In this paper we contribute to the discussion on productivity growth and the role of technological change. We introduce the fertilizer industry in more detail taking into account industry specific aspects such as structural composition, production, technologies, energy consumption within processes, sector specific policies etc. This following we derive both statistical and econometric estimates of productivity growth for the fertilizer sector over time. For the statistical analysis we develop the Kendrick and Solow indices while for the econometric analysis a translog cost function approach using both cross-state and national thime series data is employed. The results are then interpreted within a broader context of structural and policy changes in the sector as well as other sector specific aspects.

4.1. Multiple Choice Questions

1. GoI has indicated ??? crop will be introduced without evaluating biosafety and socioeconomic desirability.
   1. GM
   2. Organic
   3. Rabi
   4. Kharif
2. ??? is AGRI UDAAN.
   1. Food and agribusiness initiative
   2. Food and agribusiness accelerator
   3. Food and agribusiness incubator
   4. Both b and c
   5. All the above
3. Union Minister for Agriculture and Farmer’s Welfare launched --------------------------------------?? quality mark logo at New Delhi.
   1. National Dairy Development Board
   2. National Dairy Development Authority
   3. National Dairy Development Authority
   4. National Dairy Development Programme
4. --------------------------------------?? state is leading in the production of litchi.
   1. Bihar

During the last 50 years or so, the world has witnessed tremendous changes in terms of population exodus, accessibility to food, advancement in agricultural science and technology, increased food production, efforts in mitigating food and nutrition security, natural and human made disasters and developmental efforts in handling and containing national and global issues. Inspite of these efforts, the challenges which have cropped up are plenty and at the same time creating avenues of opportunities to address those challenges in the interest of humanity. The world is large, countries are many, agro- climatic regions vary significantly, socio-economic conditions are distinct and the national, regional and global issues vary greatly. For ease of presentation and convenience of illustration, common issues only will be dealt in this chapter. Keeping in view the theme of this book, the following topics/issues will be discussed which pose challenges for the living humanity and for future generation within next 50 years. The views are limited to developmental, planning and implementation processes only in order for governments and others to consider overcoming these challenges.

Fat-rich dairy products such as cream, makhan, butter, butter oil and ghee have played a pivotal role in growth and development of dairy industry in India as well as abroad from the time immemorial. The reference of makhan and ghee has been found in old Indian scriptures. Makhan was popularized by Lord Krishna about 5000 years before. In the traditional Indian dietary regimen, milk fat in the form of malai (cream), makhan (freshly churned butter) contributes significantly towards nourishment of people of almost all ages.

Indian dairy industry, over the years, has been converting surplus milk for the manufacture of fat-rich dairy products, especially ghee and butter with skimmilk as a byproduct because of technological and economic reasons. More than one-third of the total milk production is being utilized for the production of ghee and butter wherein milk lipids, the most expensive constituents of milk are conserved and preserved. Milk lipids play many diverse roles, some of which are essential for human health. Many of the desirable flavour and textural attributes of dairy products are due to their lipid components, consequently, butterfat has, traditionally, been highly valued. Significance of fat can also be realized from the fact that the consumer’s perception of food quality is largely based on the perceivable rich taste. Unfortunately, milk lipids are subject to chemical and enzymatic alterations which can cause flavour defects referred to as oxidative and hydrolytic rancidity, respectively. The storage stability of high-fat products is strongly influenced by these changes.

A. General
        
B. Bulbous Plants
        
C. Greenhouse Technology
        
D. Plant Breeding
        
E. Plant Physiology
        
F. Plant Tissue Culture and Biotechnology
        
G. Post Harvest Technology

4.1. Deficiency symptoms in different plant parts

Nutrients are important for growth and productivity of crops. Apart from the N, P, K, Ca, Mg and S, micronutrients such as Zn, Fe, Cu, B, Mo, Mn, Cl, etc. are also necessary for maintaining normal health and metabolism of plants. However, nutrient deficiency can lead to poor and stunted growth of plants resulting in poor yield performances. The depletion of nutrients from the soil is increasing due to adoption of modern agricultural technology through intensive and extensive cultivation of high yielding varieties. Nutrient deficiencies are very common in horticultural crops rather than in field crops.

Identification of nutrient deficiencies in crop plants through visual symptom is the cheapest diagnostic technique. When a nutrient element insufficiency occurs, below the critical level, visual symptoms may or may not appear, although normal plant development will be slowed. When visual symptoms occur, such symptoms can frequently be used to identify the source of the insufficiency.

1. Introduction

The cultivated apple (Malus × domestica Borkh.), is the most important fruit in temperate regions of the world. Apples were frequently used in different mythologies as symbols of immortality or reincarnation. One of the most popular stories attached to apple is that of Adam and Eve, who ate the forbidden fruit from the tree of good and evil which was in the center of the garden of Eden. The Latin word Malus has two meaning i.e. apple and evil, which has probably stemmed from this story from bible. In Greek mythology, mother earth or Gaia, presented a tree with golden apples to Zeus and his bride Hera on their wedding day. These golden apples were later indicated with many stories of love, bribery and temptation ranging from the abduction of Helen of Troy to the defeat and marriage of Atlanta. Goddess Pomona was deity of fruit trees in Rome. In many cultures, garden of paradise and pleasure is symbolized as the place with fruit-laden apple trees. Apple is popular because of its delicious taste and pleasant aroma.

Fruits, nuts and vegetables play a significant role in human nutrition, especially as sources of vitamins, minerals, dietary fibre, and antioxidants. Increased consumption of a variety of fruits and vegetables on a daily basis is highly recommended because of associated health benefits, which include reduced risk of some forms of cancer, heart disease, stroke, and other chronic diseases. Both quantitative and qualitative losses occur in horticultural commodities between harvest and consumption. Qualitative losses, such as loss in edibility, nutritional quality, caloric value, and consumer acceptability of fresh produce, are much more difficult to assess than are quantitative losses. Quality standards, consumer preferences and purchasing power vary greatly across countries and cultures and these differences influence marketability and the magnitude of postharvest losses. Postharvest losses vary greatly across commodity types, with production areas and the season of production. Losses of fresh fruits and vegetables in developed countries are estimated to range from 2 percent for potatoes to 23 percent for strawberries, with an overall average of 12 percent losses between production and consumption sites. In contrast, the range of produce losses in developing countries varies widely. Losses at the retail, food-service, and consumer levels are estimated at approximately 20 percent in developed countries and about 10 percent in developing countries (Adel A. Kader and Rosa S. Rolle, 2004 ). Overall, about one third of horticultural crops produced are never consumed by humans. Reduction of postharvest losses can increase food availability to the growing world population, decrease the area needed for production, and conserve natural resources. Strategies for loss prevention include use of genotypes that have longer postharvest-life, use of integrated crop management systems and good agricultural practices that result in good keeping quality of the commodity and use of proper postharvest handling practices in order to maintain the quality and safety of fresh produce.

A. Biotic and abiotic stresses in spices
1. Black pepper
1a. Challenges of biotic stress in Black pepper breeding
The status and future prospects of breeding for biotic stress resistance in black pepper are essential areas of research due to the significant impact of pests and diseases on black pepper crops. Biotic stress, caused by pathogens, pests, and weeds, can severely affect the yield and quality of black pepper, making the development of resistant varieties a critical objective for breeders.
Current status
1. Research efforts: There have been considerable efforts to identify and develop black pepper varieties that are resistant to various biotic stresses. These include resistance to diseases like Phytophthora foot rot (caused by
Phytophthora capsici), quick wilt, nematode infections, and pest attacks like the pollu beetle.
2. Breeding techniques: Traditional breeding methods have been complemented by molecular breeding techniques. Marker-assisted selection (MAS) is increasingly used to accelerate the development of resistant varieties. The integration of genomic tools has also enhanced the efficiency of identifying resistance genes and their incorporation into high-yielding varieties.
3. Resistance sources: Several resistant genotypes have been identified, but their commercial success is still limited. The genetic diversity within black pepper and related species is explored to find novel resistance genes that can be introduced into cultivated varieties.