eChapters

Importance of Fruits and Vegetables in Human Life

Fruit is the edible, and more or less juicy, product of a tree or plant and consist of the matured ovary including its seeds and adjacent parts. Usually fruits are sweet, with a wide range of flavours, colours and textures.

Composition

Fruits are very poor source of protein and fat. Avocado is the exception containing 28% fat. Fruits contain high amount of moisture hence they are highly perishable. They are also good source of fiber. Fruits are not very good sources of calories. Fruits like bananas give fairly good amount of calories. Ripe fruit contains a higher percentage of sugar than unripe fruit does and the sugar is chief in the form of sucrose, fructose and glucose. Generally fruits are poor source of iron, Mangoes are excellent source of carotenes. Oranges are fairly good source of beta carotene. Guavas are the best source of vitamin C. Citrus fruits are good source of vitamin C. Cashew fruits are inexpensive and rich in vitamin C, although there is variation of vitamin content from fruit to fruit most fruits in the raw state contain some ascorbic acid. If fruits are bruised, peeled, cooked or exposed to air, large amounts of the vitamin may be oxidized. Apples are not only expensive; they contribute little to the nutritive value. They give fiber to the diet.

Cereal crops are interchangeably called grain crops. In many publications and correspondence, they are simply called grains or cereals. As of 2012, the top 5 cereals in the world ranked on the basis of production tonnage are rice (paddy), wheat, maize (corn), barley and sorghum. These crops are also among the top 50 agricultural commodities in the world with maize ranking second next to sugarcane. Rice (paddy) ranks third, wheat - 4th, barley - 12^th, and sorghum - 30^th. Another cereal, millet, ranks no. 42 (FAO Stat 2014, updated Aug. 18, 2014). According to Chapman and Carter (1976), “a cereal is generally defined as a grass grown for its small, edible seed.” They also explained that all cereals are angiosperms, monocots, and members of the grass family Gramineae. Similarly, Lantican (2001) defines cereal or grain crops as agronomic crops belonging to the grass family Gramineae or Poaceae which are utilized as staples; the word “cereal” is derived from the most important grain deity, the Roman Goddess Ceres. Among the food grains cereals occupies for most status in human food requirements. Cereals are grown under different agro-climatic (Upland, Low land & Rainfed) conditions and it is most important staple food of about 65% of Indian population. Cereals crop is attacked by a large number of insect pests right from initial to till the harvest of the crops. Brief descriptions of the major crops, major insect pest and appropriate control measures are given below:

Abstract: Agro-ecosystem analysis of the island farming system revealed four distinct micro farming situations (MFS) viz., Hilly (MFS I), Slopping hilly upland (MFS II), Medium upland valley (MFS III) and Low lying valley (MFS IV). The enterprise combination study indicated the suitability of plantation based cropping sequences + backyard poultry and livestock in hilly areas, Short and medium duration paddy, vegetables, floriculture, plantations, fodder + backyard poultry + goat,  fish cum poultry cum duck and cattle in slopping hilly uplands, vegetables, plantations + backyard poultry, fish cum poultry cum duck in medium upland valley and long and short duration paddy, vegetables + backyard poultry, fish cum poultry and cattle in low lying valley micro farming situations. Productivity and profitability analysis of different farming systems under various micro farming situations revealed that net return obtained from cropping was Rs 3,26,408,  livestock and poultry was Rs 64,300 in MFS I where as under MFS II, it is Rs. 1,53,989 from cropping, Rs 77,176 from livestock and backyard poultry and Rs 12,465 from poultry + duck + fish. In MFS III, net return obtained from cropping was Rs 9,297 livestock was Rs 72,306 and poultry was Rs. 2,630 and poultry + duck + fish was Rs 24,957. Similarly, in MFS IV, net return obtained from cropping was Rs 57,760 where as Rs 90,893 was obtained from livestock, Rs 11,000 from backyard poultry and Rs 14,872 from poultry

9.1 Section-A : Write True / False

Q.1 The probabilistic laws for dif erent values of a random variable are made on the basis of given conditions. T ese conditions are known as "prior considerations".

Q.2 If the probabilistic laws are made for dif erent values of a random variable on the basis of results obtained from an experiment, then such results are known as "a posterior inferences".9.1.1 Discrete Uniform Distribution

Q.3 A random variable X is said to have a discrete uniform distribution over the range [1, n] if its p.m.f is written as

Abstract
Combined advancement in computer sciences and hardware with uniformly significant developments in molecular biology and chemistry are providing toxicology with a powerful new tool box. This tool box of computational models promises to increase the efficiency and the effectiveness by which the hazards and risks of environmental chemicals are determined. Computational toxicology focuses on applying these tools across many scales, including vastly increasing the numbers of chemicals and the types of biological interactions that can be evaluated. Apart from that, knowledge of toxicity pathways gathered within the tool box will be directly applicable to the study of the biological responses across a range of dose levels, including those more likely to be representative of exposures to the human population.  Although inappropriate pharmacokinetic properties are a major cause of abrasion in the safety issues are recognized as today’s single largest cause of drug candidate failure. It is expected that the right balance of in vivo, in vitro and computational toxicology predictions applied as early as possible in the discovery process will help to reduce the number of safety issues.

Introduction
Machine learning is a branch of artificial intelligence which is concerned with the development of algorithms and techniques that allow computers to learn. These techniques are tolerant of imprecision, uncertainty, partial truth, and approximation. There have emerged many methods based on machine learning techniques, such as Artificial Neural Networks (NNs), Support Vector Machines (SVMs), Decision Tree (DT), Bayesian Networks (BNs), Hidden Markov Models (HMMs), etc. These techniques attempt to study, model, and analyze very complex phenomena  for which more conventional methods have not yielded low cost, analytic, and complete solutions.

Bioinformatics is the application of information technology to the area of molecular biology. The increase in the number and complexity of biological databases has raised the need for powerful data analysis tools and techniques. To fulfill these requirements, the machine learning discipline has become an everyday tool in bio-laboratories (Inza et al., 2010). Machine learning techniques have been successful in analyzing biological data because of their capabilities in handling randomness and uncertainty of data noise and in approximation.

2.1    Ecosystem
    2.1.1 Major Components of Ecosystems
    2.1.2 Energy and Matter Flow in Ecosystems
    2.1.3 Various Types of Ecosystems
    
2.2    Biodiversity
    2.2.1 Genetic Diversity
    2.2.2 Species Diversity
    2.2.3 Ecosystem Biodiversity
    2.2.4 Values of Biodiversity
    2.2.5 Threats of Biodiversity
    2.2.6 Endangered and Endemica Species of India
    2.2.7 Biodiversity Conservation

1.    Greenhouse Effect
    
2.    Global Warming
    
3.    Atmospheric Carbon Dioxide (CO2)
    
4.    Aerosols and Global Cooling
    
5.    Clouds and Global Warming/Cooling
    
6.    Ozone Depletion and UV Radiation

7.    Climate and Horticulture
    
8.    Climate and Cashew
    
9.    Climate and Cardamom
    
10.    Climate and Coffee
    
11.    Climate and Tea
    
12.    Climate and Cocoa
    
13.    Climate and Coconut
        
References

1.    Classification of Trees
    
2.    Flowering and Foliage Trees of Indian Gardens
    
3.    Palms and Cycads
    
4.    Coniferous Trees and Deciduous Trees for Temperate Climatic Situations
    
5.    Propagation and Planting of Trees
    
6.    After Care of Trees
        
    Further Reading

INTRODUCTION

The ber or Indian jujube (Ziziphus mauritiana Lamk.) in the most common fruit crop grown in arid and irrigated zones of Indian sub-continent. It is one of ancient fruits of India which is cultivated practically all over the country for its fresh consumption. Ber is a tropical as well as subtropical fruit and can be successfully cultivated even in the most marginal eco-system of tropics and subtropics. Ber is a hardy fruit tree and is best known for growing under adverse soil and climatic conditions. It can thrive well even in drought, water-logged and salinity conditions. It is common notion among the people that ber is a poor man’s fruit. It is one of the most nutritious fruit compared to other ones. The grafted varieties of ber fetch even higher price in the market than several other fruits. Hence, ber stands no longer the poor man’s fruit. Now, ber growing has received a great attention and preferred as a commercial fruit crop in North Indian states like Punjab, Haryana, Rajasthan and Uttar Pradesh on account of its potential for higher yield and good economic return to the growers. Moreover, the tree has less water need in the summer months during the period of dormancy, thus considered an ideal fruit for cultivation in the arid and semi-arid regions of North India. Apart from ber, no other fruit trees grow wild so extensively in this region, thus it is becoming popular among the growers.

Vaccines
    
Veterinary v/s Human Vaccines
    
Modern Veterinary Vaccines
    
rDNA Technology to Prepare Vaccines
    
Veterinary Viral Vaccines
    
Live Vaccines
    
Killed Vaccines
    
Genetically Engineered Viral Vaccines
    
Veterinary Bacterial Diseases Vaccines
    
Veterinary Parasitic Vaccines
    
Vaccines against cancer
    
Swine Flu
    
Foot and Mouth Disease
    
Adenovirus Vector Vaccine
    
Johne’s Disease
    
Diseases of Poultry
    
Newcastle Disease in Poultry
    
Avian Influenza (Bird Flu)
    
Rabies
    
Disease Diagnostics
    
The Nucleic Acid-hybridization Technique
    
Diagnostics Based on pcr
    
Diagnosis by Restriction Fragment Length Polymorphisms and Related DNA-based Approaches
    
Diagnosis by DNA Probes and DNA Microarray Technology
    
Antigen-Capture Enzyme-Linked Immunosorbent Assay (ELISA) Proteomics
    
Disease Diagnosis Kits Developed
    
Brucelosis
    
Rabies
    
Canine Distemper and Canine Parvo Virus
    
Canine Hepatitis Virus
    
Foot and Mouth Disease
    
New Castle Disease
    
Egg Drop Syndrome Virus-76 (EDS-76)
    
Proteomics for Disease Diagnostics
    
Nanotechnologies in Diagnosis and Vaccine Development
    
Monoclonal Antibodies
    
Immunotherapy
    
Problems
    
Animal Genomics for Disease Resistance
    
Gene Knockout Technology
    
Gene Pharming
    
Gene Therapy
    
Types of Gene Therapy
    
Germ Line Gene Therapy
    
Somatic Gene Therapy

1.     Tissue Collection and Culture
    
2.     Trypsinization of Cells
    
3.     Cell Separation by Density Gradient Method
    
4.     Low Speed Separation of Cells
    
5.     Isolation of Lymphocyte
    
6.     Cryo Preservation
    
7.     Isolation of Spleen Cells
    
8.     Isolation of Peritoneal Macrophage
    
9.     Isolation of Blood Dna
    
10.     Differential Count of Leucocytes
    
11.     Slide Gel Electrophoresis
    
12.     Haemagglutination Assay
    
13.     Elisa
    
14.     Western Blotting
    
15.     Widal Test
    
16.     Identification of Y-chromosomes in Cattle using Pcr

Vegetables have always been looked upon as an essential part of diet and are necessary for human health and well-being. Vegetables supply many kinds of nutrients, e.g., carbohydrates, proteins, minerals, vitamins, fibers, phytochemicals, etc. and also add flavour, colour and crispness to foodstuffs. For developing modern day vegetables, breeders have utilized an understanding of genetic principles and applied them for the improvement of these crops. They often make crosses (hybridization) between a crop plant and a related or wild species (a wide cross) enabling valuable genes to be used for genetic improvement of the crops. Over the last few decades, molecular breeding is supplementing plant breeder’s efforts for accelerated genetic enhancement bringing about a revolution in this area. This approach demands efficient procedures for the routine introduction of foreign DNA into plant genomes and utilizing them for the production of novel types of vegetable. In this chapter, attempts have been made to review most of the available molecular breeding techniques, which can routinely be employed in various aspects of vegetable improvement.

Cultivars are developed by selecting for desired traits or by removing undesirable traits that are controlled by genes (the blueprint for all characteristics in living organisms) from existing varieties or breeding lines. The plant species, varieties and clones are identified or selected by their physical features since olden times. However, these traits would change with respect to environmental and climatic conditions. The biochemical parameters like enzymes, proteins, alkaloids, etc. are also likely to change due to the stages of development of plant tissue. Successful selection strategies are dependent on the breeder’s ability to distinguish genetic effects from environmental effects on a visible or measurable trait. Therefore, the scientists resorted to use ‘genetic marker’, i.e., any stable and inheritable variation that can be measured or detected by a suitable method and can be used subsequently to detect the presence of a specific genotype or phenotype, which otherwise is very difficult to detect. Presently, the breeders and scientists all over the world are pursuing mostly DNA or molecular markers.

Introduction

Groundnut (Arachis hypogaea L.) commonly called as Poor man’s cashew, is the 6^th most important oil seed crop in the world. It contains 48-50% oil, 26-28% protein and 11-27% carbohydrates. Groundnut is grown on 26.4 million hectare worldwide, with a total production of 37.1 million metric tons and an average productivity of 1.4 metric tons/ha. Developing countries constitute 97% of the global area and 94% of the global production of this crop (FAO, 2011). The production of groundnut is concentrated in Asia and Africa, where the crop is grown mostly by smallholder farmers under rain-fed conditions with limited inputs. Groundnuts (peanuts) are popularly used as seed oil in India. Since, they are obtained from the ground, they are called as groundnuts and also known as ‘Mungfali’ in Hindi, ‘Palleelu or Veru sanaga’ in Telugu, ‘Kadalai’ in Tamil, ‘Nilakkadala’ in Malayalam, ‘Kadale kaayi’ in Kannada, ‘Singdana’ in Gujarati and ‘Shengdaane’ in Marathi. Groundnuts are easily available round the year and almost everywhere in India. Groundnuts are also taken as snacks in many households especially in India. In reality, groundnuts are actually legumes. Since, they have all the properties of nuts like almonds, cashew nuts, etc., these are also included in the family of nuts.

Groundnut is the major oil seed of India. It accounts for 25% of total oil produced in India. Annual production of groundnut is around 9690 thousand tones. As the crop is grown in rainfed conditions, production and productivity are highly vulnerable to rainfall and exhibit huge fluctuation between the years. In India, groundnuts are produced both during Kharif (75%) and Rabi seasons (25%). Major production catchments of groundnut are located in Gujarat holding a share of 50.77% of total groundnut production, Andhra Pradesh holding a second place (12.69%) followed by Tamil Nadu (9.91%). Following are the top groundnut producing states of India (Table 1).

Introduction

Technological advances of the past two decades have profoundly reshaped and enhanced all aspects of medical research and practice. Concepts, methodologies, tools, and applications of medical informatics with the latest technique and approaches are essential for every one pursuing in the medical IT field. Improvements in healthcare delivery in recent years are rooted in the continued industry-wide investment in information technology and the expanding role of medical informatics. The main goal of this chapter is to collate and provide innovative and creative ideas so far published on healthcare in one article for use by the researchers, practitioners and other related with health care system for improving communication environments in health and to explore all new technologies in medical informatics and health care delivery systems.

Medical Informatics can be defined as a discipline concerned with all aspects of understanding and promoting the effective organization, analysis, management, and use of information in health care (American Medical Informatics Association, 2007). In recent years, medical informatics has become a well-recognized branch of medicine.

Nitrogen assimilation is the formation of organic nitrogen compounds like amino acids from inorganic nitrogen compounds present in the environment. Organisms like plants, fungi and certain bacteria that cannot fix nitrogen gas (N₂) depend on the ability to assimilate nitrate or ammonia for their needs. Other organisms, like animals, depend entirely on organic nitrogen from their food.

Plants absorb nitrogen from the soil in the form of nitrate (NO₃ ^-) and ammonia (NH₄). In aerobic soils where nitrification can occur, nitrate is usually the predominant form of available nitrogen that is absorbed. However this need not always be the case as ammonia can predominate in grasslands and in flooded, anaerobic soils like rice paddies. Plant roots themselves can affect the abundance of various forms of nitrogen by changing the pH and secreting organic compounds or oxygen. This influences microbial activities like the interconversion of various nitrogen species, the release of ammonia from organic matter in the soil and the fixation of nitrogen by non-nodule-forming bacteria.

Amino acids are biologically important organic compounds composed of amine (-NH₂) and carboxylic acid (-COOH) functional groups, along with a side-chain specific to each amino acid. The key elements of an amino acid are carbon, hydrogen, oxygen, and nitrogen, though other elements are found in the side-chains of certain amino acids. About 500 amino acids are known and can be classified in many ways. They can be classified according to the core structural functional groups’ locations as alpha- (?-), beta- (β), gamma- (?), or delta- (δ-) amino acids; other categories relate to polarity, pH level, and side-chain group type (aliphatic, acrylic, aromatic, containing hydroxyl or sulphur, etc.). In the form of proteins, amino acids comprise the second-largest component (water is the largest) of human muscles, cells and other tissues. Outside proteins, amino acids perform critical roles in processes such as neurotransmitter transport and biosynthesis. Amino acids having both the amine and the carboxylic acid groups attached to the first (alpha-) carbon atom have particular importance in biochemistry. They are known as 2-, alpha-, or ?-amino acids (generic formula H₂NCHRCOOH in most cases where R is an organic substituent known as a “side-chain”); often the term “amino acid” is used to refer specifically to these. They include the 22 proteinogenic (“protein-building”) amino acids, which combine into peptide chains (“polypeptides”) to form the building-blocks of a vast array of proteins. These are all L-stereoisomers (“left-handed” isomers), although a few D-amino acids (“right-handed”) occur in bacterial envelopes and some antibiotics. Twenty of the proteinogenic amino acids are encoded directly by triplet codons in the genetic code and are known as “standard” amino acids. The other two (“non-standard” or “non-canonical”) are pyrrolysine (found in methanogenic organisms and other eukaryotes) and selenocysteine (present in many noneukaryotes as well as most eukaryotes). For example, 25 human proteins include selenocysteine (Sec) in their primary structure, and the structurally characterized enzymes (selenoenzymes) employ Sec as the catalytic moiety in their active sites. Pyrrolysine and selenocysteine are encoded via variant codons; for example, selenocysteine is encoded by stop codon and SECIS element. Codon–tRNA combinations not found in nature can also be used to “expand” the genetic code and create novel proteins known as alloproteins incorporating non-proteinogenic amino acids.

Nucleic acids are polymeric macromolecules, or large biological molecules, essential for all known forms of life. Nucleic acids, which include DNA (deoxyribonucleic acid) and RNA (ribonucleic acid), are made from monomers known as nucleotides. Each nucleotide has three components: a 5-carbon sugar, a phosphate group, and a nitrogenous base. If the sugar is deoxiribose, the polymer is DNA. If the sugar is ribose, the polymer is RNA. Together with proteins, nucleic acids are the most important biological macromolecules; each is found in abundance in all living things, where they function in encoding, transmitting and expressing genetic information—in other words, information is conveyed through the nucleic acid sequence, or the order of nucleotides within a DNA or RNA molecule. Strings of nucleotides strung together in a specific sequence are the mechanism for storing and transmitting hereditary, or genetic, information via protein synthesis.

The term nucleic acid is the overall name for DNA and RNA, members of a family of biopolymers, and is synonymous with polynucleotide. Nucleic acids were named for their initial discovery within the nucleus, and for the presence of phosphate groups (related to phosphoric acid). Although first discovered within the nucleus of eukaryotic cells, nucleic acids are now known to be found in all life forms as well as some nonliving entities, including within bacteria, archaea, mitochondria, chloroplasts, viruses and viroids. All living cells contain both DNA and RNA (except some cells such as mature red blood cells), while viruses contain either DNA or RNA, but usually not both. The basic component of biological nucleic acids is the nucleotide, each of which contains a pentose sugar (ribose or deoxyribose), a phosphate group, and a nucleobase. Nucleic acids are also generated within the laboratory, through the use of enzymes (DNA and RNA polymerases) and by solid-phase chemical synthesis. The chemical methods also enable the generation of altered nucleic acids that are not found in nature, for example peptide nucleic acids.

Introduction

In man’s continued effort to enhance food production, new high yielding crop varieties and new techniques for crop and field management are being constantly evolved resulting in a parallel increase in disease occurrence which calls for their efficient management. Of the various management strategies available for disease management, the chemical strategies have so far dominated our thinking. Over emphasis on chemical control of plant diseases has caused serious imbalances in the agro-ecosystem^1-2.

The shift to exploration of non-chemical strategies is likely to correct the imbalance in our approach and subsequently improve the understanding of Integrated Disease Management (IDM). IDM is defined as ‘a disease management system that utilizes all suitable techniques in a compatible manner to reduce and maintain pest pathogen population at levels below those causing economic injury.’ Fungi are the important group of pathogens.

In continuation of our work on natural pest management agents the present investigation aims at the preparation of different types of aqueous extracts of locally available four Indian medicinal plants viz., Datura stramonium Linn (Datura), Ricinus communis Linn. (Castor), Vitex trifolia Linn. (Nirgudi) and Nerium indicum Mill. (Kanher); study of stability of these extracts at room temperature; and evaluation of their anti-fungal potencies. This study will help to preserve and increase the pest management potency and efficacy of natural products.

Neural suitcase determines the size of our world.

We think. We imagine. We generate ideas. We make sense of things. We take decisions. We observe patterns, and then try to understand their significance. Our neural suitcase does all this. It tells us the tales of many minds (1). The tales are beautiful, vulnerable, quiet, chaotic, real, fictional, wise, foolish, friendly, hateful, meaningful, and blind. Our neural suitcase builds castles in the air. It determines the size of our world.

The traditional fermentation process is an uncontrolled system and is usually carried out in a quite unhygienic environment. As the process of fermentation is brought about by the microbial activity so in the traditional system of fermentation there is every possibility of inclusion of microorganisms which is not desired in or that can cause spoilage to the finished product. Although no incidents of food poisoning has been reported due to consumption of fermented fish there are also no reports of any clinical investigations in this regard. A study on the microflora of such a fermented fish product is useful to understand -how safe is the product for consumption. The diverse groups of microorganisms that are present in the fermented fish products will provide information about their characteristic nature -beneficial or pathogenic, their contribution towards production of flavour and aroma, etc. The environment, however, is the key factor for the so called ‘microbial diversity’ among different fermented fish products round the globe. Moreover, the aquatic habitat, processing technique and of course, the handling during processing are the other factors that equally make a way for the introduction of a variety of microorganisms in the finished product. A study on different curing stages i.e. fresh, semi-cured and fermented, is therefore necessary to understand the pattern of microbes and become evident the role played by the microbes during fermentation.

“It is unbelievable that such a tiny streamlet, as was our initial test trial with the first bacterial starters exactly 40 years ago, grew to a big river for an important industry. Who would have believed then that the use of starter cultures would be a matter of course today” (Niinivaara, 1994). The idea of inoculating Lactobacillus into dry sausage material was introduced by Jensen and Paddock in 1940(US Patent 2,225,783) with the aim to reduce the ripening time as well as ensuring the quality and aroma of dry sausages. The first LAB meat starter culture, introduced as a pure culture of Pediococcus cerevisiae, was developed in 1955 in the USA by Niven et al. (1955). At the same time, Niinivaara (1955) applied Micrococcus M53 to dry sausage production in Europe. The work of Niinivaara was continued byNurmi (1966) who combined micrococci with Lactobacillus plantarum. Today, several companies provide Lactobacillus sp., Pediococcus acidilactici, P. pentosaceus, Staphylococcus xylosus or S. carnosus strains in pure cultures or their mixtures for fermentation of meat (Hammes et al. 1985). A starter culture may be defined as a preparation or material containing large numbers of variable microorganisms, which may be added to accelerate a fermentation process. Being adapted to the substrate, a typical starter facilitates improved control of a fermentation process and predictability of its products (Holzapfel, 1997).

India has been a welfare country since Independence and the primary objective of all governmental and non-governmental endeavors has been the welfare of its millions people. The policies and programmes should be designed with the aim of alleviation of rural poverty which has been one of the primary objectives of planned development in India. It was realized from pre-independent rural development efforts, that a sustainable strategy of poverty alleviation must be based on increasing the productive employment opportunities in the process of growth itself. Elimination of poverty, ignorance, diseases and inequality of opportunities and providing a better and higher quality of life were the basic premises upon which all the plans and blue-prints of development should built.

Rural development implies both the economic betterment of people as well as greater social transformation. In order to provide the rural people with better prospects for economic development, increased participation of people in the rural development programmes, decentralization of planning, better enforcement of land reforms, greater access to credit, etc proper planning is envisaged.

Initially, main thrust for development was laid on agriculture industry, communication, education, health and allied sectors but later on it was realized that accelerated development can be achieved only if governmental efforts are adequately supplemented with direct and indirect involvement of people at the grass root level.

One of the major constraints in the efforts to modernize and efficient restructuring of the animal husbandry practices is the delay in taking the results of research to the farming community and in persuading them to adopt new, profitable and locally relevant technologies. The very need of the extension work is to bridge the gap between what is known to the scientists in the laboratories and what is actually being practiced by the farmers in the field. In other words, the major goal of extension machinery is to accelerate the processes of communication and to motivate rural people or livestock owners for adoption of new and profitable technologies. Hence, it is very important to understand these processes of how the farmers get such technologies and how they adopt them.

Communication

The term communication is originated from the Latin word ‘Communis’, meaning common or establishing commoness. When we communicate, we attempt to establish ‘commonality’ with someone through the message.

Communication is the process by which two or more people exchange ideas, facts, feelings or impressions in ways that each gains a common understanding of the meaning, intent and use of the message (Paul Leagens, 1961).

1.1 Introduction

Due to the ever increasing world population, the demand for food would also increase. India is one of the largest food producer countries of the world (first in milk production, second largest in fruit and vegetable production and third largest in grains production). It is the seventh-largest country in the world, with a total land area of 3,287,263 square kilometres. India has varied climates of snow covered Himalayas, desserts, oceans, fertile plains and areas receiving the highest rainfall in the world. Name any food item; it can be grown in one or the other part of the country. All these make the production of various types of foods of plant (fruits, vegetables, cereals, pulses, oilseeds, spices etc) as well as animal origin (fish, meat, milk etc.) possible in the country. The annual production of cereals, fruits and vegetables is 260, 57 and 77 million tonnes respectively, besides this, the production of cow and buffalo milk is about 102.1 million tonnes and that of sugarcane and spices are 355.52 and 1.1 million tonnes respectively [15]. Table 1 shows that the production of various food items has increased many folds during the last five decades. On one hand, we feel proud as we produce one of the largest quantities of foods in the world and there has been an enormous rise in the production of various foods in India during the last five decades, on the other hand we should be very much worried being a leading country as far as the wastage of food in the world is concerned. The postharvest losses are huge and only meagre quantity (2%) of the food is processed. Sharma [41] very rightly said that when we do not agree to throw away Rs 4000/-per month out of a salary of Rs 10,000/-per month then why do we accept 40% postproduction losses of food in the country. This would require immediate necessary action to save a major portion of the food that has already been produced.

Goat husbandry has been practiced for thousands of years, since the first domestication of goats. Goat rearing for long mainly consisted of “zero input” concept, which suits well under extensive system of management. Major goat management systems in vogue are nomadic (transhumant)/extensive, semi-intensive and intensive, which have evolved on age-old experience and convenience of resource poor farmers under diverse agro-climatic and agro-ecological conditions.

Nomadic/Transhumant/Migratory/Extensive System

Extensive grazing lands cover vast areas of temperate Asia, and are important both environmentally and as a source of livelihood for goat and sheep herders.This practice is strengthened by migratory, free range, pasture cum range grazing options. The goats are compelled to often graze over long distances in search of feed and water. Under nomdic (transhumant) system, both grasslands and browse are important vegetation type. Land tenure problems, or lack of clarity in grazing rights are some of the emerging challenges for the goat herders under nomadic system. Many a times, the conflict of interests between settled farmers and herders is increasing with rising population pressure and intensification of agriculture. Poor pasture condition is one of the major constraint for the goat herders under nomadic system. Some of the measures suggested to improve the situation include better grazing management, reseeding with high-yielding species, and herder training.

Goat and sheep are two species which have been traditionally managed extensively. Mixed flocks of sheep and goats are common, although separate flocks of either species can also be seen. Extensively managed animals have considerably more behavioural freedom compared to intensively managed animals that are always more confined. Goat has an advantage over other species of livestock in that they can live and produce on land unfavourable for other forms of agriculture. Goat has the ability to forage and survive in areas, where cattle and buffaloes would perform poorly. Goat can revert to wild conditions if given the opportunity whereas sheep donot.

When Gene Expression Appears to Alter Mendelian Ratios Lethal Allele Combinations

Us recessive lethal alleles eliminaters a progeny class. Multiple Alleles

A gene can have more than two alleles, but a diploid individual only has one or two of them.

Different allele combinations can produce different phenotypes and different severities of symptoms.

Different Dominance Relationships

Incomplete dominance of an allele produces a phenotype in the heterozygote that is intermediate between that of either homozygote.

Codominant alleles are both expressed in a heterozygote. Epistasis-When One Gene Affects Expression of Another

In epistasis, one gene masks the effect of another. An example of epistasis in humans is the Bombay phenotype.

The Bombay phenotype results in O type blood for individuals homozygous recessive for the recessive “h” allele.

1. INTRODUCTION

The agricultural paradigm in the developing world including Iran will have to be recast to take advantage of knowledge availability to achieve multiple goals of income, food, jobs, etc. Although, many farming communities in developing countries need timely expert advices to make them more productive and competitive, they are still facing a multitude of problems to maximize agricultural productivity. In spite of successful and promising researches conducted on new agricultural practices, majority of the farmers are not getting upper-bound yield due to several reasons. One of them is that scientific agricultural advice is not reaching the farming community in a timely manner. A wide information gap exists between research and practice.

To cope with this problem different countries have taken various measures. What is common in the extension systems of developing countries is that in a backdrop of rapid organizational and social changes in agriculture, new hardware and software devices have to be applied for better responsiveness to increasing farmers demand for timely and accurate information. At the pace of recent progress in ICT, within a decade it will be possible to provide instantaneous connectivity to millions of people, enabling mass customization and personalized services (Reddy and Ankaiah, 2005). Data mining technology can be used to extract useful knowledge from huge database and simulation technology can be used to predict in to the future (Wiederhold, 2002).

Technical Knowledge (ITK) based special inputs / Techniques for plant growth

Growth of the plant has for long been believed to be due to the minerals absorbed from the soil and the food materials synthesized by the palnt. It is recognized that growth of the plant is very much regulated by certain chemical substances known as growth regulators. These substances are formed in one tissue or organ of the plant and are then transported to other sites where they produce specific effects on growth and development. These materials can be produced organically for improving plant growth.

3.1. Growth Promoting Substances

Are those organic solutions (like Panchagavya, Buttermilk & Coconut milk slurry, Amudhakaraisal) prepared using the plant and animal products, decayed fruit and other agricultural wastes. For example

Bougainvilleas (Bougainvillea spp.) are most popular garden plant in India and widely grown in all types of gardens. Colourful bracts in wide array of colours like white, yellow, pink, magenta, bi-coloured besides several bract forms (single, double) are the main reason of their popularity. Nevertheless, free flowering habit and requirement of low maintenance are the other plus points. When in bloom, Bougainvilleas produce strong colorful effect in the landscape gardens and an adorning beauty to see. Flowering of Bougainvillea is comparable only with the ‘Azaleas’ of the temperate region. In tropical gardens, there is dearth of flowers after March when winter annuals start fading out. As a result gardens become drab and unattractive. Bougainvilleas usually start mass blooming from March and help to maintain the gardens in presentable form. Therefore, they are perfect choice for every garden specially getting flowers in harsh climatic condition.

Bougainvillea belongs to the family Nyctagenaceae and is a native of Rio de Janerio, Brazil. Out of ten species, only four have colourful bracts and horticulturally important viz. Bouganivillea glabra, B. spectabilis, B. peruviana and B. x buttiana.

15.1 Law of Mass Action

Gulberg and Waage, the two Norwegian chemists in the year 1864 stated the law of mass action in this form: ‘The velocity of any chemical reaction at any instant at a given temperature is proportional to the active mass of each of the reactants at that instant present in the system, the active mass in a homogeneous system is defined as the number of gram molecule of the substance present per unit volume i.e., the molar volume’.

The Committee on Economic Development has defined small business as one which satisfies two or more of the following criteria.

• Management is independent (usually the managers are owners).
• Capital is supplied and ownership is held by an individual or small group.
• The area of operation is mainly local. Workers and owners are in one home community. Markets need not be local.
• Relative size within the industry – the business is small when compared to the biggest in its field. The size of the top bracket varies greatly so that what might seem large in field would be definitely small in another.

Abstract

The softer rock types belonging to Tertiary period, intense deformation and the related more frequent tectonic weak planes, high degree of weathering and extensive road cutting are the inherent systems in provoking Landslides in Noney-Nungba segment of NH-53 in the state of Manipur. So Landslide Hazard Zonation mapping was carried out in this segment using BIS method and also geotechnical investigations were carried out in Awang Khull part-II slide and Raungdai slide and on the basis of type of failure and the morphotectonic conditions mitigation strategies were suggested.

In this century the usage of plastics had become very common. However, it is important to know as to what kinds of plastics are used for food handling and storage and the health hazards caused by using it. It has been observed that plastic packaging plays a significant role for the enhanced shelf life and in the ease of storage and cooking for many foods. Some kinds of plastic materials which are widely used for handling and storage of food and water include polyethylene terephthalate (PET). It is used in soft drinks, water, sport drinks, ketchups, salad dressing bottles, peanut butter, pickle, jelly and jam jars. This plastic is strong, heat resistant, resistant to gases and acidic foods. It can be transparent or opaque. It does not leach any chemicals that are suspected of causing cancer or disrupting hormones and can also be recycled.

Usage of High density polyethylene (HDPE) has been found to be common in milk, water, juice bottles, yogurt, margarine tubs, grocery, trash and retail bags. High-density polyethylene is stiff and strong but is not heat stable (it melts at a low temperature). It does not leach any chemicals that have a role in causing cancer or disrupting the hormones. HDPE can be recycled. Low-density polyethylene (LDPE) is used into making films of various types, some bread and frozen food bags and also in the making of squeezable bottles. Low-density polyethylene is relatively transparent. Many of the films are not heat stable either and may melt the food in case it is touching it. However, polypropylene (PP) is more heat resistant, harder, denser and more transparent than polyethylene and is therefore used for heat-resistant microwavable packaging and sauce or salad dressing bottles. Polycarbonate is clear and heat resistant. It is also durable and often used to make refillable water bottles and sterilisable baby bottles, microwave ovenware, eating utensils, plastic coating for metal cans. Tiny amounts of bisphenol A are formed when polycarbonate bottles are washed with harsh detergents or bleach (sodium hypochlorite). At high levels of exposure, bisphenol A is potentially hazardous as it mimics the female hormone estrogen. In addition, polystyrene (PS) and polyvinyl chloride (PVC) are also used during food material transportation and handling in supermarkets. Modern food safe plastic bags are plasticizer-free which do not leach harmful chemicals into the food during cooking.

ABSTRACT

Endophytes are microorganisms that live inside the host plant tissues without causing symptoms of disease. There has been a crescent interest in the prospecting of these microorganisms as sources of novel and bioactive natural products. In fact, a significant number of interesting natural products have been reported in the last years. In this chapter some aspects regarding the endophytes are detailed: the relationship with their host plants, isolation, preservation, taxonomy, cultivation, frequently isolated strains, tropical endophytes, novel structures isolated and also their biological activities.

Key words: natural product, endophytic fungi, plant fungus interaction, secondary metabolites.

2.1 Introduction

Food is one of the complex systems involving many constituents such as carbohydrates, lipids, proteins, vitamins, minerals and other phytochemicals. These all constituents are not present in the same relative proportion in every type of food and thus the foods are categorized and valued according to the presence of these constituents as protein rich foods, fat rich foods, etc. The specific type of food is in abundance with only one or at most two of these constituents and rest of the bulk is not valuable, commercially. So, if these active constituents which are present in the tissue surrounding inactive matrix, are separated, it is of great benefit with respect to increased purity, nutritive value, functional properties, reduction in volume, easy handling and transportation. On contrary some valuable food items contain undesirable constituents generally referred as anti-nutritional factors. Removal of these anti-nutritional factors enhances the food value and commercial utilization. Hence, the separation of phytochemicals and removal of anti-nutrients from the food matrices can be easily carried out by using a unit operation called as extraction.

Extraction involves the separation or isolation of active/desirable components of complex system viz., plant and animal tissues from the rest of inactive/undesirable components by using suitable means such as solvent or mechanical structure. The basic principle involved in the extraction process is partitioning of different components in accordance with the extracting agent. For example, in mechanical extraction, the partitioning is due to pressure and screen/apperature size where as in case of solvent extraction, the portioning of components from mixture takes place due to particular solubilizing power of solvent used.

Stress is usually defined as an external factor that exerts a disadvantageous influence on the plant. Under both natural and agricultural conditions, plants are exposed to unfavourable environments that result in some degree of stress. Water deficit, chilling and freezing, heat stress and heat shock, salinity, oxygen deficiency and air pollution are major stress factors restricting plant growth. Stress is measured in relation to plant survival, plant processes, growth and crop yield. An environment, which is stressful for one plant, may not be stressful for another, e.g., pea and soybean that grow best at 20 and 30°C, respectively. As the temperature increases, the pea shows sign of heat stress much sooner than soybean, thus, soybean has greater heat stress tolerance.

To the farmers, the plants those survive in an adverse environment are called hardy plants and those, which do not survive under a particular adverse environment, are called susceptible or tender plants. So based on reactions of several plants to the environment, particular plants are selected for a region and also the farmers to suit the nature of a crop adopt different seasons of planting. Biologists have adopted the term stress for any environmental factor potentially unfavourable to a living organism. The ability of the plant to survive the unfavourable factor is due to its stress resistance. There is an equal and opposite reactions for every action. Stress is the action, whereas, strain is the reaction. A body of a plant subjected to stress is in a state of strain. External force of a particular stress causes disturbances in the body of the plant leading to a change in either shape or size and also may lead to internal disturbances, which affect physiological processes. Up to a point, a strain may be completely reversible. When the stress is released at this stage, the plant becomes normal without exhibiting any strain, which is known as elastic strain. Beyond this point, the strain will be partially elastic and irreversible partially, and then we say, it reaches permanent set and it is known as plastic strain.

Introduction

Development of improved crop varieties is vital for sustained increase in agriculture production and productivity. Timely supply of quality seed is equally significant since the contribution of quality seed alone is estimated to be 15-20 per cent to total crop production. Seed quality attains more significance in view of emerging biotic and abiotic stresses, issues related to quality and phytosanitary measures, competition in domestic and international markets and emerging food needs. Measures of seed legislation with respect to quantity and quality were initiated in the country by establishment of National Seed Corporation during 1963 under Ministry of Agriculture. The seed sector in India during the period was dominated by the Public sector. The National Seed Corporation was the Central Body to produce seeds of superior dwarf varieties in rice, wheat, and superior hybrids in maize, pearl millet and sorghum. This was followed by various seed legislations enacted by Government of India. Further, AICRP-NSP (Crops), popularly known as National Seed Project was launched during 1979-80. The NSP-Project came into operation in three major phases and continues to produce breeder seed to cater the needs of the Indian farmers. The project resulted in achieving breeder seed production surpassing the indents in all major crops. The seed programme of the country was further strengthened with NSP II (World Bank) Project starting in 1989-90, which not only supported the ICAR and SAUs, but also Department of Agriculture, Seeds Corporations, Seed Certification Agencies and Private Seed Industries to a great extent in production, processing and in providing quality seeds to the country.