eChapters

Familiarization with various fertilizers, manure and Agri – implements: Manure: * Nutrients are added to soil for healthy growth of plants. * Continuous growing of crops makes the soil poor in nutrients. * Manures are organic substances obtained from decomposition of plants animal wastes. * Manuring is done to replenish soil with nutrients.
Advantages of manuring: * Improves water retaining capacity of the soil. * Makes the soil porous and exchange of gases becomes easy. * Increases the number of friendly microbes. * Improves the texture of the soil. * Replenishes the soil with necessary nutrients.
Fertilizers: * These are chemical substances rich in nutrients. * These are produced in factories.
Advantages of fertilizers: * Help farmers to get better yield of crops.
Disadvantages of fertilizers: * Sources of water pollution. * Make the soil less fertile. * Artificial fertilizers often cause diseases.

Qualitative detection of undesirable constituents, adulterants in Feeds: The nutritive value of feed ingredients from the same origin may exhibit variation. The factors which are responsible for the variation are natural variation are natural variation, processing, adulteration and damage, deterioration. These days, due to shortage and high prices of feed ingredients, adulteration is one of the main problems. Feed quality can be examined by different techniques:
(a) Feed microscopy: Stereo or compound microscopy may be used for: (i) Screening method; (ii) Floatation technique.
(b) Chemical tests: For heavy metals, nitrates, phosphates, sulfates, free sulfur, salts: carbonate, chloride, salt, sugar, urea, blood, hoof or horn, leather meal, uric acid.

Estimation of calcium and phosphorus in feeds: Calcium is precipitated as calcium oxalate by adding ammonium oxalate to acid soluble extract prepared after running a sample for ash. Precipitates of calcium oxalate are dissolved in sulfuric acid and titrated with potassium permanganate to know the content of calcium.
Using N1V1 ≡ N2V2, 1.0 ml of 0.1 KMnO4 = 2.004 mg Calcium.
Calcium, g % = Burette reading difference X 2.004 X dilution factor X 100 / weight of the sample used for preparation of acid soluble mineral extract X 1000.
[dilution factor, (for example) = 250 / 25 (ml aliquot taken) = 10]
Phosphorous present in the sample is precipitated with ammonium molybdate and the precipitates are dissolved in NaOH solution. Excess sodium hydroxide is titrated with nitric acid to calculate the actual volume of NaOH used up which is direct proportion to the Phosphorous content.
1 ml of 0.1 N NaOH = 0.1347 mg Phosphorus
Phosphorus % = Actual volume of 0.1N NaOH solution used to dissolve precipitate X 0.1347 X dilution factor X100 / weight of sample used for acid soluble extract X 1000
[Here, dilution factor is 250 / 50 (aliquot taken) = 5]

Proximate analysis: Weende’s system is followed. Weende was a small village in Germany, near the University of Goettingen at that time (1860), when this system was developed by Hanneburg and Stohmann. Although it is neither true nor approximate, but somewhere in the middle, that is, proximate analysis of the various parameters for assessment purpose; it gives information about the quality of feeding stuff and still followed.

Preparation and processing of samples for chemical analysis: The preparation of samples depends upon the purpose of analysis and the nature of the constituents that are to be determined. The preparation of samples for analysis is as important as the analytical procedure and hence, it should be done with utmost care. (A) Smpling of wet material: (1) Plant material; (2) Silage; (3) Cattle faeces; (4) Sheep / goat faeces; (5) Poultry excreta; (B) Sampling of air – dry material: (I) Hay or straw; (II) Concentrates.
Small quantities of feed samples are collected from several locations, all sides, in the middle and are mixed well after chaffing. Such mixture is subjected to quarter sampling, by spreading on levelled ground in circular form. This circle is now divided into 4 equal quarters. Any 2 diagonally opposite quarters are selected and other 2 are rejected. Selected portions are mixed properly and again spread on levelled ground in circular form. This mixture is again divided into 4 equal quarters and any 2 diagonally opposite quarters are selected, while remaining 2 are rejected. This procedure is repeated till required quantity of sample is obtained. This representative sample is brought to laboratory as early for drying in a hot air oven. Dried samples are ground to pass through 2 mm sieve in a Willey mill (large samples may be ground through hammer mill), as described in chapter 10. Sample is collected in an airtight plastic bag and stored in desiccator.

Identification / familiarization of various feed ingredients: As per National Research Council (N. R. C.), there are 8 main groups of feedstuffs. (1) Dry forages and roughages; All forage and roughage cut and cured are included in this category. These are bulky feeds with low digestibility. Crude fibre is more than 18 % and Total digestible is less than 60 % because of high cell wall contents. For example: dry grass (hay), wheat straw, paddy straw, oat straw, stovers (aerial part without ears), husk (maize) or aerial part without heads (sorghum), hulls and shells. (2) Pasture range plants, tree leaves and forages; Roughage either harvested or without harvesting (fresh) are included in this group. For example: pasture grass, range plants, tree leaves, green forages (legume and non – legume). (3) Silage; only ensiled forages are included. For example: legume non – legume silages. (4) Energy or basal feeds; Feeds are of low protein content, having crude protein less than 20 %, crude fibre less than 18 % and Total digestible nutrients more than 60 %. For example: cereal grains, milk by – products, fruits, nuts, roots etcetera; (5) Protein supplements; Feeds are of high protein , more than 20 %, crude fibre less than 18 % and Total digestible nutrients more than 60 %. For example: animal, marine, avian, and plant products. Meat meal, fish meal, oil seeds, and their cakes etcetera; (6) Mineral supplements; These are natural or pure elements. For example: composite mineral mixture or specific mineral supplements; (7) Vitaminsupplements; These are natural or pu e forms. For example: composite vitamin  pre–mix or specific vitamin supplements; (8) Feed additives; these are for improving efficiency of utilization of feeds. Number of examples have been cited elsewhere in this book [theoretical part above].

Orientation and general precautions in laboratory: Laboratory safety glasses or goggles should be worn in any area where chemicals are used or stored. They should also be worn any time there is chance of splashes or particulates to enter the eye. Closed – toe shoes must be worn at all times in the laboratory. Perforated shoes or sandals are not appropriate. Lab coat, gloves, eye protection, and appropriate attire (impermeable gowns, plastic aprons, masks, face shields) should be worn at all times in the lab. Long pants and shoes completely covering the top of the foot should be worn at all times when
working in the lab. Do not eat or drink in the lab at any time. Do not expose electric sparks, open flames and heating elements to organic solvent vapours.
Do not leave your assigned laboratory station without permission of the in charge. Learn the location of the fire extinguisher, eye wash station and first aid kit [A first aid manual, different sized sterile gauge pads, adhesive tape, band aids in several sizes, elastic bandage, antiseptic wipes, antibiotic ointment antiseptic solution like hydrogen peroxide]. Fire blanket, exits from the room, fire escape route. Basic life support (BLS) is important for clinical point of view. Lab safety is important because it can prevent injury, keep us from making mistakes and save lives. Following lab safety rules is part of being a good citizen. We should follow the lab safety protocols to stay safe and healthy. We cannot tell if a chemical is hazardous (radioactive !!) just by looking at it. Friedrich Esmarch, the founder of “Modern first – aid”. Emergency kit includes - * Flashlight with extra batteries, * Whistle, * Dust mask, * Local maps, * Manual can opener, * Battery powered or hand cranked radio, * Books, games, puzzles or other activities for children.

The term animal waste comprises, the fresh excrement, including both solid and liquid excreta and urine. * It also includes the bedding material, animal washings, feed waste and straw which are having considerable manorial value. * The characteristics of the livestock wastes depend on fractions of the digestibility, composition of feed ration and species of animals and their physiology. * The waste ruminants have different composition than obtained from swine and poultry, which is having high nutritive value.
For fodder production, the animal waste can be utilized in many ways, that is, as pesticide and that is, as non – conventional source of source energy as pesticides bio – fertilizer to improve soil fertility for sustainable agriculture. This livestock waste can be recycled in following ways: Organic mulch, As pesticides, In organic farming, Biogas production, Composting, Vermicomposting, Profitable manure management by livestock fish integration.

The topic deals with methods to increase the amount of water stored in the soil profile by trapping or holding rain water where it falls, or where there is some small movement as surface run – off. Principles: Choice of method. There is no simple way of classifying methods of water conservation. One suggestion is to do it by comparing rainfall with crop requirements, giving 3 conditions: (a) Where precipitation is less than crop requirements; here the strategy includes land treatments to increase run – off onto cropped areas, following for water conservation, and the use of drought – tolerant crops with suitable management practices. (b) Where precipitation is to crop requirements, here the strategy is local conservation of precipitation maximizing storage within the soil profile, and storage of excess run – off for subsequent use. (c) Where precipitation is in excess of crop requirements; in this case the strategies are to reduce rainfall erosion, to drain surplus run – off and store it for subsequent use.
Some design principles: The effect of scale, methods for crop land: Broad bed and furrow system (BBF), Ridging and tied ridging, Conservation bench terraces (CBT; also known as Zingg terrace, and flat channel terrace); Contour furrows (also known as contour bunds and desert strip farming); Water spreading (the use of run–off areas): Natural run – off; Collected and diverted run – off; Inundation methods, Flood diversion; Surface drainage; Other sources of water: Snow, dew, mist . [Figure 4].

For animal rearing it is pertinent to know the technique of keeping and preserving the feed required for the livestock. Apart from the rich pasturage, one may have the longevity of their feeds is immense concern for many. Animal feeds are an amalgam of diverse ingredients, including vegetable oil, sunflower oil. There are also animal fats, like – lard, tallow etcetera, which are included in the fodder. These elements give fodder the targeted input to animal husbandry. The prime factor that occurs and becomes a challenge for many livestock rearing, the cost for their feeds, which would provide quality and quantity in their output. Once the feed is rightly chosen for the animal, that one is rearing, the next challenge arises. Here is somehow animal feeds can be preserved safely, thereby increasing the longevity of the feeds - * Stay safe from the Sun; * Metal cans; * Storage bunkers; * Sliding metal roof bunkers;
* Commodity sheds; * Plastic containers or drums; * Re – usable freezer; * Wood bins.
Important dots
• All feed and ingredients have to be stored in a cool place [ideally below 77 0 F or (77 0F –32) X 5/9 = 25 0C), although this is not possible at outside locations under summer situations].
• Feed has to be kept dry to prevent fungal or bacterial growth.
• Prevention of entry for rodents or insects is essential.
• Stable form of vitamins is important to use.
• Anti – oxidants are important for preserving fats, oils in ingredients and feed.
• Expiry dates are important on the containers, for all feed materials for their shelf – life (for ground grains = 1 month after milling)
• For fats and oils: Opened container: 1 month; un – opened or stabilized: 1 - year post mixing.

Fodders and grasses can be preserved either as hay (dried fodder) or as silage (wet fodder), depending on weather conditions and available resources. These are fed in some (high input) farms to bridge seasonal scarcity periods.
Hay making: * The crop is harvested for hay making at its pre – flowering stage, when its growth is levelling off and its feeding value is still high; * Hay is best made during the rain free days; * Crops with thick and juicy stems should be dried after chaffing and conditioning, which will speed up the drying process and slow down the loss of nutrients; * Hay should be raked only a few times during the drying process in order to avoid the shattering of leaves and bleaching of the hay; * Legumes should be raked in the morning hours to avoid leaf shattering; * After drying and curing, bailing and / or stacking should be
done as early as possible. Storage under a roof is preferred; * For hay bailing, maximum permissible water concentration is 15%. Storage of hay before sufficient drying may cause fire due to spontaneous combustion; * Storage of hay with higher moisture concentration may result in mould growth, making the hay unfit for feeding.
Silage making: * Crops and plant materials rich in soluble sugars, such as – maize, sorghum, oats, sugarcane tops, hybrid Napier grass and other grasses are highly suitable for ensiling; * The dry matter concentration of the forage at the time of ensiling should be around 15 – 30 %, but higher is possibe; * Chaffing of the material for ensiling increases its compactness, thus eliminates the air space to the maximum content; * Green to semi – green forage, which may use the O2 present for respiration, results in high quality silage; * The silo should be air tight after filling; * Fermentation starts withing hours after closing the silo, and accelerates over the next 2 to 3 days. It terminates after about 3 weeks. Organic acids, primarily – lactic acid and acetic acid, ethanol and gasses such as CO2, CH4, NO2, and NH3 are produced during the fermentation process; * Due to production of acid, the pH of the biomass is reduced to a level below 4, resulting in the termination of all biological activities, after which material remains conserved under aerobic conditions.

Roughage contains > than 18 % crude fibre and < than 60% Total Digestible Nutrients (T.D.N.). Leguminous fodders contain more Digestible Crude Protein (D.C.P.). Some common dry legumes are: Pea straw, Arhar straw, Lucerne hay. And some common green legumes are: Berseem (clover), Cow pea, Lucerne (alfa alfa). Non – leguminous fodders contain less D.C.P. Some common dry non – legumes are: Wheat straw, Paddy straw, Oat hay, Grass hay. Whereas, some common green legumes are: Sorghum, Maize, Oat, Napier.

32 – 33. Agronomic practices for fodder production: Feeding green forages to animal is economic and better for animal health and production. To get green forage throughout the year, it is necessary to sow the crop at proper time and also to harvest it at a proper stage. According to season, following agronomical practices may be followed:
(a) Rabi crops: Berseem, Lucerne, Oat, Mustard, Sugarcane tops
(b) Zaid crops: Chari, Maize, Sorghum, Cow pea, Guar.
(c) Kharif crops: Maize, Sorghum, Cow pea, Sudan grass, Napier, Para grass.
Berseem and Lucerne (legumes) are best forages for milk production. Berseem is called as king and Lucerne as queen of the fodder crops. Maize, Sorghum, Oat (non – legumes) at flowering stage are good forages. Hybrid Napier, Guinea grass, Para grass and other green grasses are palatable, but poorer in nutritive value than legumes and many non – leguminous forages. Straws and
stovers are poor quality roughages. Average voluntary intake of legumes is 2.0 kg; Non legumes and other grasses have 2.25 kg; while of straws, stovers is only 1.5 kg Dry Matter / 100 kg body weight.

Common feeds and fodders: An edible material which is ingested, digested, absorbed, assimilated by the animals for their benefit, is known as feed. As per the National Research Council, Dry forages and roughages are cut and cured. These are bulky feeds with low digestibility. Crude fibre is > 18 % and TDN is < than 60 % because of high cell wall content. Some of the common feed stuffs are: dry grass (hay), wheat straw, paddy straw, oat straw etcetera. Stovers [aerial part without ears and husk (maize) or aerial parts without heads (sorghum). Hulls and shells too. Pasture range plants, tree leaves and forages are either harvested or without harvesting (fresh) are also very good for feeding, for example: pasture grass, range plants, tree leaves, green forages. Concentrates have < than 18 % crude fibre and > than 60 % TDN. Feeds rich in protein (plant origin) are: Cotton seeds / cakes, Mustard cake, Groundnut cake. Whereas animal origin protein sources are: Skim milk, Fish meal, Blood meal. Feeds rich in carbohydrates (energy) in grains are: Maize, Oat, Barley. Whereas grain by – products are: Wheat bran, Rice bran, Gram husk, Pulse chuni.
Points to ponder
• Animals are sometimes said “to feed” or to eat, therefore to mean = “food for animal”. The old English root is fedan = “nourish, sustain or foster”.
• Fodders are harvested and taken to animals; whereas, Forages are browsed on by animals, while still on the land.
• Feed manufacturing refers to the process of producing animal feed from raw agricultural products; whereas, Fodder produced by manufacturing is formulated to meet specific animal nutritionrequirements for (i) different species of animals, (ii) different life stages. The idea is: to transfer the seed energy and the plant’s energy to the animal.

Feed Additives
Feed additives are administered to animal to enhance the effectiveness of nutrients and exert their effects in the gut or on the gut walls. Some of the common feed additives are: Antibiotics, Probiotics, Prebiotics, Arsenicals, Buffering compounds, Anti – oxidants, Enzymes, Hormones, Adsorbents, Organic acids, Flavouring agent, Pigments.
(a) Antibiotics: Chemical compounds produced by other microbes (for example, fungi, and are also synthesized in the laboratory) that, when given in small amounts, halt the growth of bacteria. They are used at therapeutic levels to treat diseases caused by bacteria. In sub – therapeutic levels added to the feed or food to enhance the rate of growth. Modes of action: They halt the growth of bacteria by interfering with their cellular metabolism by (i) Interfere with the synthesis of bacterial cell wall and cause the cell to burst, (ii) Inhibitors of protein synthesis, (iii) Inhibitors of bacterial DNA synthesis, (iv) Ionophore antibiotics – interfere with Na – K electrolyte balance, for example: Monensin sodium.
(b) Probiotics: It’s a live microbial food supplement that beneficially affects the host animal by improving the intestinal microbial balance. Beneficial microbes produce enzymes that complement the digestive ability of the host and their presence provides a barrier against invading pathogens [Figure 2].

Anti–nutritional factors: Detoxification of undesirable components is very important, because some feeds may contain toxic substances, the excess consumption of which may cause decreased nutritive value of the feeds or may injure some vital organs or even cause death. 
Points to ponder
• Anti – nutrients present in the diet, either by themselves or their metabolic products arising in the system.
• Plants evolved these compounds as defensive mechanism against insects, parasites, bacteria and fungi.
• Feeds high in anti – nutrients: Lectins = legumes, cereal, grains, seeds, nuts, fruits, vegetables. Oxalates = spinach, swiss chard, sorrel, beat greens, beet root, rhubarb, nuts, legumes, cereal grains, sweet potatoes, potatoes. Phytate [IP6] = legumes, cereal grains, pseudo – cereals (amaranth, quinoa, millet), nuts, seeds.
• Anti – nutrient in wheat: Phytate being the most important among all, reduces the bio – availability of Iron and Zinc. There could be protease inhibitor, tannin, lectin, alkaloid, oxalate too.
• Main anti – nutrients in edible forage and fodders are: tannin, saponins, phytic acid, gossypol, lectin, amylase inhibitor, goitrogen, protease inhibitor.
• Removal of anti – nutrients: heating, boiling, soaking, spouting, fermentation. By combining different methods, many anti – nutrients can be degraded completely.

Feed processing includes all operations necessary to achieve the maximum potential of nutritional value of a feed stuff. The process involves changing ingredients in such a manner as to maximize their natural value and the net returns from their use. Feed processing may be accompanied by Physical, Chemical, Thermal, Bacterial or other changes of a feed ingredient before it is fed. The primary reasons for processing feeds are to make changes in the moisture content, density of feed, particle size, palatability; or to make more profit, to improve nutrient availability, keeping quality (shelf – life); or to reduce storage – transportation space, cost, moulds, Salmonella and other harmful substances. Feed mill equipment: The milling industry has been concerned with “Grinding” – a process of particle size reduction. During
earlier times, the same equipment was used Food for humans to produce Food for livestock because, the process was basically ‘grinding’ of whole grains. As milling developed into the “Modern Flour Industry”, the milling process was extended to include:

Crude protein of feeds contain true protein and non – protein nitrogen. True protein is made up of amino acids and for maximum efficiency, feed must have essential acids in correct proportion, correct balance as well as non – essential amino acids should also be in sufficient amounts. About digestion in simple stomached animals, the true protein is degraded to oligopeptides (less than 10 peptides) in the stomach, subsequently to mono peptide amino acids in the small intestine. Thereafter amino acids are assimilated in the small intestine.
But in ruminants, the situation is complex in the sense that feed proteins get digested in the rumen, but even amino acids are also broken down by the microbes, and thereafter, amino and carboxylic groups are released. Secondly, synthesis of new amino acids or proteins takes place for formation of their own microbial body coat. Because of these reasons, the approach for protein evaluation or expression is different in ruminant animal. Further, non-protein portion of the feed cannot be utilized effectively by non – ruminants like swine and poultry. These animals are usually fed with oil cakes, cereals and
cereal by products, which are poor in non-protein compounds, however, young succulent fodders, clover etcetera are rich in such compounds. In the laboratory, crude protein may be estimated by kjeldahl’s method and true protein may be precipitated from non – protein nitrogen fraction by treating with cupric hydroxide or trichloro acetic acid. The precipitate is filtered off and subjected to kjeldahl’s process. For experimental evaluation of non – ruminants: albino or wistar rats, rabbits, guinea pigs or poultry birds are taken. Casein (milk protein) or albumen (egg protein) are fed to these animals for a period of 4
weeks and any of the following methods are undertaken to look for the protein quality based on response of animals.

There are 3 types of systems for expressing the energy value of feeds and many examples have been depicted in each of these systems the world over, but here, one example has been taken up in each of these categories. [a] Digestive Nutrient Type: For example, Total Digestible Nutrient (TDN) system: Digestibility coefficients of various organic nutrients like – carbohydrate, fat and protein are determined by digestibility trials, which can be involved for total digestible nutrients as a measure of nutritive value of feeds. Hence only faecal energy loss has been considered barring losses from other channels. Hence, roughages are overestimated by such calculations. Otherwise, this method is simple, economical and has some basis for animals to be fed on such standard. The TDN value is expressed in % age as following - % TDN = % digestible crude protein + % digestible crude fibre + % digestible nitrogen free extractives + [% digestible ether extract x 2.25]. where Nitrogen Free Extractives = 100 – [crude protein % + ether extract % + crude fibre % + ash %] on dry matter basis.
[b] Production value type: For example, Starch Equivalent (S.E.) system originated from Germany, hence followed in those areas of Europe and takes into account almost all the losses involved in digestion of feed. The method is based on Carbon – Nitrogen balance studies without the help of any costly equipment, but faced some criticism too. The animals were kept in big animal calorimeter, where different sources of energy losses could be determined to the best of their ability. When it was ensured that the ration on which the animals were neither gaining nor losing weight (by measuring the intake and outgo of both carbon and nitrogen), then pure starch, straw pulp, that is, cellulose, wheat gluten (protein) and oil were added to this diet and determined the carbon and nitrogen separately again. Feeds for productive purposes are measured in terms of starch values. S.E. = Weight of fat stored per unit of feed / weight of fat stored per unit of starch x 100. That is, amount of feed required to produce as much animal fat as is being produced by unit amount of starch, when fed in addition to maintenance. For example, if linseed cake has got SE of 75, which means that 100 kgs of linseed cake can produce as much fat as 75 kgs of pure starch, when fed in addition to maintenance ration.

• All green leafy materials in nature have Mg, because it is the structural component of chlorophyll. Wherever such green colour is there, carotenes would be associated. The colour of carotenes is red, but this
red colour is masked by green colour of chlorophyll. Wherever above green colour is there, vitamin K would also be invariably associated. Therefore Mg, vitamin A and vitamin K would be available by – default or what!! {α, β, ϒ, δ – carotene (s)}. Hence, grazing animals generally would be receiving these nutrients. [we humans may also eat fresh green leafy vegetables {spinach (palak), bathua, methi, coriander (dhania), cabbage, knol – khol, capsicum (bell pepper, Shimla mirch) to get above nutrients]
• Vitamins help regulate body functions, keeping the body healthy and promoting resistance to dis – eases.
• Supplementation of micro – nutrients (vitamins and minerals) as pre – mix, have + ve effects on maintenance, growth, and milk production.
• Biotin, niacin, choline improves milk production in dairy cattle.
• Multivitamin tablet = A to Z0NS may be given (preferably natural sources would always be suggested).
• Vitamin ‘B’ complex, vitamins C, K are very much synthesized by rumen microbes.
Importance of vitamins and their requirements in animal health and production:
Tables 2 & 3

Points to ponder
• Minerals are naturally formed substances in earth. They are typically solid, inorganic, have crystal structure formed by geological processesnaturally. They may consist of single chemical element or a  compound more usually. They are identified by these characteristics: colour, streak, hardness, hardness, luster, diaphaneity, specific gravity, cleavage, fracture, magnetism, solubility.
• Colour in minerals: Its result of brain’s interpretation of the dominant wavelength of light. “Minerals are coloured, because certain wavelengths of incident light are absorbed and the colour we perceive is produced by the remaining wavelengths that were not absorbed”. Some minerals are colourless.
• The mineral is an essential element which has a metabolic role in the body and if not provided in the diet, can cause deficiency symptoms, which can be prevented by adding that element to the diet. Animal body contains about 3% minerals, which are constant constituents of animal tissue.
• Classification is based on the amount required by the animals. Major elements are required in large amounts and are expressed in % age, whereas minor or trace elements are required in small amounts and hence expressed in parts per million (ppm) or parts per billion (ppb) or even parts per trillion (ppt) …. so on and so forth, depending on discovery of new trace element.
• They have following significant role in the cattle: health, production, reproduction, defense.

Role of water
Water is the principal constituent of living plants as well as animal body. With the maturity of seed, water content decreases. Animal body is composed of two thirds of water – intra and extra cellular fluids, and that a feed is any substance used by the body for building tissue, it is obvious that water is very important nutrient. Experiments have shown that animals may live for 100 days without organic feed, but they may die within 5 to 10 days, when deprived off water. Cell rigidity and elasticity imparts a definite form to body, which may be changed by the liquid content of the cell. Due to its high dielectric constant, oppositely charged ions co – exist in water without much interference. Hydrolysis is an important chemical process in digestion and other metabolism, where H+ and OH- ions of water are introduced into bigger molecules and these bigger molecules are broken down into smaller units.
Lubrication is yet another important function where water prevents friction or drying in joints, conjunctiva, mouth, pleura surrounding lungs, other soft organs. Body heat regulation is carried out due to certain properties – for example, due to high specific heat conducting power, water can carry away heat from the site of production and distributing it throughout the body. Yet another due to such property, highest latent heat of evaporation from skin, lungs or tongue. Oxygen and carbon di oxide are soluble in water, hence gaseous exchange takes place in the tissues, for example, fish. The “aqueous humour” of eye helps to keep up the ‘shape’ and ‘elasticity’ of the eye – ball and acts as refractive medium.

Carbohydrates exhibit protein sparing action, because proteins are mainly required for tissue – building, that is, general wear and tear in the body. If there is any emergency, say animal is deficient in calories of the diet, then it will use adipose and protein tissues. It is said that proteins and fats are burnt (or oxidized) in the flame of carbohydrate. It means that certain intermediary compounds of glucose oxidation through Krebs cycle, are absolutely necessary for oxidation of proteins and fats. Again, in any emergency, if glucose level of the body goes down, fats and proteins are taken over and they get metabolized faster than the body can take care of the intermediate products. However, ketone bodies – acetone, acetoacetate β – hydroxy butyrate appear in urine. In addition to above, monosaccharides are very important (vital)m structural components of many compounds which regulate metabolism. Among these are DNA, RNA for transfer of genetic information of the cell, which contain ribose and deoxy ribose sugars. Glucuronic acid occurs in the liver and this combines with toxic chemicals and bacterial by – products and hence, acts as detoxifying agent. Hyaluronic acid (a disaccharide) forms matrix of connective tissue. Heparin, a mucopolysaccharide, is very important anti – coagulant. Chondroitin sulfates are present in cartilage, bone, skin and tendon. Glycosides are widely distributed throughout the plant kingdom and a number of them have been used as drugs for animals. 
Lipids: these are the most concentrated form of the stored energy in animal kingdom, because they provide 2.25 times per unit more energy than carbohydrate. They provide insulation for vital organs protecting them from mechanical shock and also maintain body temperature. The cell membranes have phospholipids, for example – Erythrocytes. Prostaglandins exhibit hormonal activities. Essential fatty acids – linoleic, linolenic and arachidonic acids show deficiency symptoms in their absence. Lipid also delays hunger, because it requires longer time to pass through stomach than carbohydrate or protein. They also help in lubrication.

Nutrition involves various bio – chemical and physiological activities which transform feed elements into body elements. These feed elements are nutrients which are digested, absorbed, utilized to build and renew the components of the animal body. As a result, animal grows and produce – milk, eggs, wool with the help of energy so produced in the body. After weaning, most of our farm animals obtain all of their feed supply from plants. Barring carnivores, the plant kingdom is the original and essential source of all animal life, because plants are able to utilize the energy of the sun to build substances which nourish
the animal. Plants make use of carbon dioxide, water and mineral salts to form carbohydrates, fats and proteins, which are utilized in the life processes of animal body. Thus, plants store and animals dissipate energy.

There are 6 nutrients which are very important to animal body – carbohydrates, proteins, minerals, vitamins and water.
Carbohydrates: These are polyhydroxy aldehyde or ketone as in monosaccharide or polymers in oligo or polysaccharides. The question arises whether carbohydrate is a dietary essential !!! Carbohydrate may not be dietary essential, but it is definitely metabolically essentially. The organic compounds – fats, proteins are oxidized only in the presence of carbohydrates. Carbohydrates are the structural components of DNA, RNA, and some other vital organic molecules. Although less than 1% is present in the human body [because, constantly being formed and broken down in metabolism], yet without the presence of this carbohydrate, the existence of living creature is at stake. Carbohydrate in the form of glucose primarily provides energy in the body and excess amount of carbohydrate is stored as glycogen in the liver and muscle. More than 50 % of the energy value of the diet is provided by carbohydrate.
Glucose + 6 O2 6 CO2 + 6 H20 Δ E (675 k. cal).
Lipids: These are important constituents of plant and animal tissue and these can be extractable from biological materials with the usual fat solubles, for example – Ether, Chloroform, Benzene, Carbon tetrachloride, Acetone etcetra. The lipid metabolism is in dynamic state. There is constant mobilization and transportation of fatty acids from the depots. Some portion of absorbed fatty acids are degraded in the same way, while others are combined with glycerol transported back to depots. All these reactions are so balanced, that mixtures of fatty acids in the depots, blood and organs tend to remain at equilibrium
condition.

Historical Aspects: Eighteenth Century: Antoine Lavoisier, a French scientist was known to be as ‘Founder of science of nutrition’. He established chemical basis of nutrition in his respiration experiments and introduced balance, thermometer in his studies. Along with Laplace, he designed a calorimeter through which it was demonstrated that respiration is the essential source of body heat. Even they started realizing that something is there like – carbohydrate, protein, fat and a need was felt for their investigation. But due to bad luck, French revolution took place and Lavoisier’s career was ended by
Guillotine (be – heading). As a result, further studies on nutrition suffered a setback for several years.
Second half of 19th century: Babcock, an American dairy scientist observed that feeds of different sources were eaten by animals, but there was ‘no way of knowing’, what particular contribution each of those feeds was making to animal’s needs. Therefore, he conceived the idea of trying the rations made up of entirely from a ‘single plant’. He was criticized that his research was highly impractical. Later, his younger colleagues pursued this idea in another experiment. They planned their experiment more meticulously with a greater number of animals by feeding single crop rations. But at that time, they couldn’t conclude irrespective of their exhaustive chemical studies of feeds, excreta, tissues of dead calves. It was later on that; the new discoveries provided the ‘true answer’. Later, based on this previous experience, ‘Purified diet method’ was undertaken: carbohydrate as pure starch, fat as pure lard or oil, protein as pure casein along with some minerals then known to be essential. It was revealed that there were certain other nutritionally essentials which were very important.

Government schemes, policies, and training initiatives serve as vital enablers for the expansion of natural beekeeping, offering essential financial, technical, and institutional support to farmers and rural entrepreneurs. These interventions are designed to enhance productivity, sustainability, and economic resilience, particularly among smallholders, tribal communities, and women.

Subsidies and grant-based programs help reduce entry barriers by covering costs related to indigenous and modern hive types, protective gear, and honey processing equipment. This financial assistance empowers marginal farmers to embrace beekeeping while supporting certification and branding efforts that connect them with higher-value markets.

Beekeeping is now officially recognized within national and state-level agricultural policy as a key allied activity that promotes biodiversity and strengthens rural livelihoods. These policies often integrate natural beekeeping within wider organic farming frameworks and support food safety regulations, quality assurance, and export facilitation.

Government-led training programs—delivered through agricultural universities, extension networks, and specialist institutions—equip beekeepers with knowledge on colony management, disease control, and sustainable harvesting. These sessions emphasize natural methods that avoid synthetic inputs, safeguarding both pollinator health and ecological integrity.

To elevate natural beekeeping from a basic subsistence activity to a sustainable and profitable venture, strong marketing approaches and entrepreneurial drive are essential. These elements enable producers to expand their customer base, enhance the value of their offerings, and establish distinctive brands that reflect the purity and ecological integrity of their products.

There is increasing interest in natural bee products both within India and globally, fueled by heightened consumer awareness around health, sustainability, and eco-friendly lifestyles. Beekeepers must identify and understand their core markets—ranging from local health-conscious buyers and organic stores to international importers—and align their product presentation, packaging, and positioning to meet specific consumer preferences. Conducting market research can help pinpoint specialized segments like organic-certified honey, therapeutic propolis, or royal jelly supplements.

Entrepreneurial opportunities go beyond harvesting raw honey. Value addition can take many forms: creamed or infused honey, honeycomb packs, artisanal beeswax candles, cosmetic products made with propolis, or balms infused with bee-derived ingredients. Packaging innovations, sustainability certifications, and appealing brand narratives further enhance consumer trust and market differentiation. Diversifying products also helps minimize risk and stabilize income.

Natural beekeeping presents a valuable economic opportunity for farmers, rural populations, and aspiring entrepreneurs by blending ecological farming methods with sustainable income generation. This approach emphasizes low-cost, environmentally conscious practices that align with the natural behavior of bees, thereby minimizing production expenses while delivering high-value outputs such as honey, beeswax, pollen, royal jelly, and propolis.

One of its key strengths lies in reduced dependency on costly inputs like synthetic drugs, chemicals, and advanced machinery. By employing traditional hive models, natural pest control methods, and organic feeding practices, operational costs are kept low, making the venture accessible to small and marginal farmers with limited capital resources.

Natural beekeeping yields multiple marketable products beyond honey, enabling producers to diversify their income. Products like beeswax and royal jelly are in demand in premium sectors, both domestically and globally. With multiple harvests across seasons, this diversity ensures consistent revenue and improved economic resilience.

Global consumer trends increasingly favor natural, organic, and chemical-free products due to their health and environmental appeal. As a result, natural honey and related derivatives are gaining traction in wellness, skincare, and gourmet food markets, creating promising opportunities for certified natural beekeepers to access niche segments and export markets.

Certification and adherence to quality standards are essential for ensuring the authenticity, safety, and marketability of natural bee products such as honey, beeswax, propolis, royal jelly, and pollen. These standards are especially important in the expanding natural and organic product sectors, where consumer trust and product integrity are critical. Certification validates that bee products are produced using specific methods aligned with natural or organic farming principles—free from synthetic chemicals, pesticides, and artificial additives.

Certified natural bee products often command higher prices and gain access to premium domestic and international markets. Key quality parameters include moisture content, sugar composition, absence of adulterants, pesticide residues, and microbiological safety. Regulatory authorities such as the Food Safety and Standards Authority of India (FSSAI) conduct assessments and enforce compliance with these criteria. For instance, honey is evaluated for HMF levels, diastase activity, and pollen count, while beeswax and propolis are tested for chemical contaminants.

Certification not only promotes sustainable and ethical beekeeping practices but also supports biodiversity conservation and traceable trade systems. Consumers benefit through guaranteed product safety and health advantages, while producers gain market credibility and economic incentives. However, small-scale beekeepers often face obstacles such as high certification costs and complex documentation. Supportive measures like training, capacity-building, and technological innovations— such as blockchain for traceability—can help expand certification accessibility and improve transparency throughout the value chain.

Apart from honey, bees also generate several other valuable products— beeswax, propolis, royal jelly, and pollen—all of which offer significant nutritional, therapeutic, and commercial benefits. In natural beekeeping systems, these secondary bee products are collected carefully to maintain ecological balance and avoid disrupting the natural functioning of the hive. Each of these substances plays a crucial role within the colony and finds diverse applications in healthcare, cosmetics, traditional medicine, and small-scale industries. When harvested responsibly and kept free of synthetic additives, they serve as sustainable income sources for beekeepers and contribute to environmental conservation and biodiversity.

HONEY

Among all bee products, honey is the most recognized and widely used from ancient times to the present day. Human cultures have celebrated honey for centuries, embedding it in literature, folklore, and religious symbolism. The earliest known references to honey use involve religious offerings, possibly among the first non-animal sacrifices. It was often presented alongside milk, butter, ghee, oil, or incense.

Harvesting and processing natural honey are integral parts of beekeeping that demand attention to timing, technique, and ethical practices to protect both the integrity of the honey and the well-being of the bees. In natural farming systems, the emphasis lies not only on honey yield but also on maintaining balance with the surrounding environment and the bees themselves. Natural honey is prized for its pure quality, medicinal benefits, and nutritional richness, which can only be safeguarded through traditional, low-intervention approaches. The central objective is to harvest only the surplus honey, ensuring colonies retain sufficient reserves to sustain themselves through adverse seasons.

Honey is usually harvested after the flowering season, once nectar flow has been abundant and bees have stored ample honey for their use. A key tenet of natural beekeeping is to avoid stripping the hive entirely of its reserves, thereby safeguarding the colony’s survival. Mature honey is collected from capped combs, which signal that the honey has reached the correct moisture content. In contrast to commercial methods that may rely on chemicals or excessive smoke to drive bees away, natural beekeeping encourages gentle handling using a bee brush or a small amount of smoke to move bees without causing them distress.

Queen rearing and colony multiplication are central to sustainable and independent beekeeping, especially within the principles of natural farming. The queen bee serves as the core of the colony—ensuring reproduction and maintaining social cohesion through pheromonal signals that influence the behavior and unity of worker bees. A robust and fertile queen guarantees a consistent brood cycle, appropriate worker-to-drone ratios, and overall colony health. In natural systems, queens are raised without artificial grafting or chemical interference, allowing bees to follow their innate biological instincts.

Queen rearing occurs naturally through swarming or supersedure. During swarming, the old queen departs with a group of workers to establish a new colony, while the original hive nurtures a replacement queen. Supersedure takes place when bees sense the current queen is aging or weakening and raise a successor. Natural beekeepers can work in harmony with these processes—observing and supporting the development of queen cells, transferring brood or queen cells to new hives, and letting the colony follow its own cycle of renewal. This method enhances genetic strength and colony resilience.

In natural beekeeping systems, the management of pests and diseases focuses on prevention, ecological harmony, and chemical-free practices that safeguard both bee health and environmental integrity. Departing from conventional methods that often depend on synthetic antibiotics, fumigants, or miticides, natural approaches aim to fortify the colony’s inherent resilience through biological and culturally grounded techniques. Central to this strategy is the maintenance of strong, genetically robust colonies, ensuring clean and well-aerated hives, and providing nutritional support through diverse and abundant floral sources. Healthy, wellnourished colonies are inherently more capable of withstanding infections and parasitic invasions.

Indian apiaries commonly contend with pests such as wax moths, ants, wasps, small hive beetles, and mites like Varroa destructor and Tropilaelap sclareae. Diseases including American foulbrood, European foulbrood, chalkbrood, and Nosema can pose significant threats if not identified and contained promptly. Natural management emphasizes routine hive inspections to detect early symptoms, followed by the removal and safe disposal of infected combs. Maintaining adequate space between colonies can minimize disease transmission, while structural modifications to hive entrances and the use of barriers like ash rings or water moats effectively deter ants and other intruders.

Natural beekeeping emphasizes nurturing bee colonies through a diet that mirrors their natural foraging behavior while avoiding synthetic inputs. Bees instinctively collect nectar and pollen from a diverse range of flowering plants, which supply essential carbohydrates, proteins, vitamins, and minerals for their development, immunity, and productivity. In a thriving environment free from pesticides, bees meet their nutritional needs independently. However, when natural forage becomes scarce—due to seasonal changes, drought, or habitat loss—supplementary feeding may be required to maintain colony strength.

In natural farming, supplements are offered using organic, chemicalfree options such as jaggery-based sugar syrup, diluted honey from surplus or crystallized stores, or herbal infusions made from tulsi, neem, and turmeric to boost bee digestion and immunity. These methods support crucial colony functions like brood development, wax production, and honey storage while reducing stress that could lead to disease outbreaks

In natural farming practices, the adoption of natural and indigenous hive designs aligns with values of sustainability, simplicity, and care for bee wellbeing. Unlike commercial systems that rely on uniform Langstroth hives for maximum honey production, natural beekeeping focuses on affordable, locally sourced, and non-intrusive hive models that support bees’ instinctive behaviors with minimal disruption.

These hives are constructed to replicate bees’ natural nesting environments, such as hollow trees or crevices in rocks. They offer suitable insulation, darkness, airflow, and internal structure that support the colony’s natural rhythm. Rather than prioritizing honey output, these hives are intended to promote the long-term health and stability of the bees. Typically, natural hives remain in a fixed position, allow bees to build immobile combs, and need fewer inspections, which helps reduce colony stress.

Such indigenous designs uphold the core ideals of natural farming—selfsufficiency, minimal interference, and ecological balance—while also making beekeeping more practical and inclusive for small-scale and resource-limited farmers.

Choosing an appropriate location for an apiary is a crucial aspect of natural beekeeping. The productivity, health, and survival of bee colonies are strongly affected by environmental elements such as vegetation diversity, local climate conditions, availability of water, and absence of regular disturbances. In natural farming systems, selecting a site takes on greater importance, as it aims to harmonize with nature, reduce interference, and integrate smoothly with the broader farm ecosystem

An ideal apiary should be situated in a calm, shaded location, away from frequent human activity, loud noises, and pesticide contamination. Bees are extremely sensitive to chemical residues; therefore, the surrounding area should follow organic or chemical-free farming practices. The site must offer year-round access to nectar and pollen sources—like flowering plants, trees, herbs, and native vegetation—to maintain steady nutrition for the bees

Having a clean water source within 500 meters is essential, as bees use water for cooling, honey processing, and nurturing the brood. If there’s no natural water body nearby, shallow containers filled with water and pebbles or floating sticks should be provided. The area should also be shielded from high winds, harsh sunlight, and heavy rains through natural barriers such as hedgerows, bamboo groves, or dense shrubs.

A thorough knowledge of bee biology and colony organization is crucial for practicing sustainable beekeeping, particularly within natural farming systems that rely on minimal interference. Honeybees are social creatures that thrive in complex, cooperative colonies characterized by a structured division of labor. A standard honeybee colony includes three types of adult bees—queen, workers, and drones—each with specific biological and functional roles. The queen, as the only reproductive female, lays thousands of eggs and emits pheromones that maintain order and harmony in the hive. Worker bees, which are sterile females, form the majority of the colony and are responsible for tasks such as cleaning, brood care, comb construction, hive defense, and foraging for nectar, pollen, propolis, and water. Drones, the male bees, primarily serve the purpose of mating with a virgin queen and are usually removed from the hive during winter or resource shortages.

The colony’s internal structure is equally intricate. Bees construct wax combs made of hexagonal cells that serve as nurseries for brood, storage for pollen (bee bread), and reservoirs for honey. Brood development progresses through four stages: egg, larva, pupa, and adult. Worker bees actively regulate environmental conditions like temperature and humidity to ensure optimal brood health. Natural colonies operate with remarkable cohesion, where each bee contributes to the overall survival and success of the hive. This collective organization highlights honeybees as symbols of biological efficiency and mutual dependence.

Bees are fundamental to maintaining ecological stability and enhancing agricultural output, making it vital to understand their diversity—especially in the context of natural farming systems. Different bee species vary in behavior, environmental adaptability, honey yield, and efficiency in pollination. India is home to several native and introduced bee species, each contributing uniquely to honey production and ecosystem health. Choosing a species for natural beekeeping depends on factors like climate, local flora, and whether the beekeeper’s goal is honey production, crop pollination, or species conservation.

Among these species, Apis dorsata—the rock bee—is a large, wild bee known for building single, exposed combs on high structures such as trees and cliffs. While it can produce up to 40 kg of honey per colony annually, its aggressive nature makes it unsuitable for domestication. In contrast, Apis cerana indica, the native Indian hive bee, is better adapted to India’s diverse climates and is compatible with low-maintenance, eco-conscious farming. Producing around 6–10 kg of honey per colony annually, it suits small-scale, sustainable practices.

Beekeeping in India has a long-standing and diverse legacy, deeply embedded in traditional knowledge systems and rural livelihoods. References to honey collection are found in ancient texts like the Rigveda and Charaka Samhita, where honey was valued for its medicinal, spiritual, and culinary uses. Historically, tribal honey hunters collected wild honey from cliffs, tree hollows, and forest hives using time-tested, sustainable methods that honored the natural rhythms of bees. While these practices were rooted in indigenous wisdom, the shift to structured beekeeping—using man-made hives—began during colonial times and gained further momentum after independence.

The establishment of institutions such as the Khadi and Village Industries Commission (KVIC) in the 1950s and the Central Bee Research and Training Institute (CBRTI) in Pune played a pivotal role in promoting scientific beekeeping and offering formal training. In recent years, the focus has transitioned toward more natural and sustainable beekeeping models, especially within organic and natural farming frameworks.

Apiculture, or beekeeping, is a key contributor to the development of sustainable and eco-conscious farming systems. In the context of natural farming, where synthetic inputs are avoided, bees serve a dual purpose—as vital pollinators and as indicators of ecological well-being. Incorporating bees into such farming systems improves crop yields through efficient pollination and offers an additional source of income from honey and other hive-based products.

Natural farming promotes the peaceful coexistence of all living beings. Bees, as crucial players in preserving biodiversity and ecological balance, embody this principle. In contrast to conventional beekeeping, which may depend on artificial feeding, chemical treatments, and synthetic hives, natural beekeeping uses traditional, minimal-intervention practices that respect the bees’ natural instincts and life cycles. This ethical model emphasizes care for the colony over intensive honey harvesting or manipulation of the queen bee.

Experiment No.- 1
AIM
To determine the sucrose content in condensed or evaporated milk using the Lane-Eynon method.
Principle
The Lane-Eynon method is used to measure sucrose in condensed milk by utilizing the reducing properties of sugars. Sucrose, being a non-reducing sugar, is first hydrolyzed into glucose and fructose (reducing sugars). These reducing sugars then react with Fehling’s solution, producing a brick-red precipitate of cuprous oxide (Cu2O) when heated. This allows for the accurate determination of sucrose content after the hydrolysis (inversion) process.
Reactions
• Reaction of Fehling’s Solution
• CuSO4 + NaOH → Cu(OH)2 + Na2SO4
• Cu(OH)2 + Reducing Sugar (RCHO) → Cu2O (brick-red precipitate) + RCOOH
This reaction forms cuprous oxide (Cu2O), a brick-red precipitate. The intensity of this precipitate correlates with the concentration of reducing sugar in the sample, providing a way to determine sucrose content.

4.1 Introduction
Human milk widely acknowledged as the optimal source of nutrition for infants, providing a rich array of components crucial for their growth, repair and development. However, the composition of human milk can vary
significantly within and between feeds, throughout the day, over the course of lactation, and among different mothers and also populations. While this variability is beneficial for infant health and survival, it presents challenges for the management of nutrition of high-risk infants who require precise oversight. The composition of human milk can be altered by factors such as the handling of expressed milk, including how it is stored and pasteurized. Thus, proper management of expressed milk is essential. The recommended practice for infant nutrition is exclusive breastfeeding for the first six months, followed by continued breastfeeding for at least one to two years. Human milk is naturally suited to meet the nutritional needs of infants, providing both nourishment and bioactive compounds that support healthy growth and immunity.
Human milk contains a variety of bioactive components, such as immune cells, anti-infective and anti-inflammatory agents, growth factors, and prebiotics. In contrast to infant formula, which has a fixed nutritional profile, human milk is dynamic and can vary between and within feedings, influenced by maternal factors, environmental conditions, and the methods used for expressing and managing milk.
A thorough understanding of human milk’s composition is vital for effective infant feeding, especially for at-risk infants. It also allows for the assessment of how milk storage and pasteurization may impact its beneficial components. Additionally, some of the bioactive elements in human milk are being studied for their potential use in medical treatments, either as preventive or therapeutic agents.

The goods and services with the help of which the process of production is carried out, are called factors of production. Economists talk about four main factors of production: land, labour, capital and entrepreneurship (or organization). They are also called as the inputs of production. On the other hand, the goods produced with the help of these inputs, are called as the output.
1. Land
Land refers to all natural resources such as forests, water, climate, and soil. It provides space for livestock farms and raw materials for the dairy and meat industries.
Features of Land
1. Gift of Nature – Land and climatic conditions are naturally available. For example, the fertile plains of Punjab and Haryana are naturally suited for growing fodder crops like berseem and maize, which are essential for dairy farming. Similarly, the lush green pastures of Uttarakhand, Jammu & Kashmir and Himachal Pradesh provide an ideal environment for rearing sheep and goats.
2. Limited in Supply – Land is fixed, and certain resources like water bodies and fodder resources may deplete over time. Water scarcity in regions like Maharashtra has forced farmers to shift from water-intensive crops to drought-resistant fodder crops.

3.1 Malted Milk
Malted milk, originating from the ideas of British pharmacist James Horlick in the 19th century, was initially marketed under the name “Diastoid” before being trademarked as “malted milk” in 1887. Although initially targeted
for infants and invalids, its appeal expanded due to its nutritional value, convenience, digestibility, and palatability. Recognized globally for its lightweight, non-perishable nature, and high-calorie content, malted milk is
created by evaporating a mixture of malted barley, wheat flour, and whole milk until it forms a powder.
There aremainly two types of malt powder: diastatic and non-diastatic. Diastatic malt containing enzymes breaking down starch into sugar, aiding in dough rise and crust formation, particularly in bread making. Non-diastatic
malt lacks active enzymes and is primarily utilized for flavor enhancement, commonly in beverages. It may also include sugar, coloring agents, and other additives to improve taste and appearance.
3.2 Malting
Malting is a crucial process employed in treating cereal grains, such as barley, by inducing germination through soaking in water followed by halting the process through drying or heating with hot air. This technique encompasses two main stages: sprouting and kiln-drying. The term “malt” encompasses several products of this process:
1. Malted grains: These are grains, like barley, that have undergone the malting process.
2. Malt sugars: These are sugars, predominantly maltose-rich, derived from malted grains, often utilized in baking, such as baker’s malt.
3. Malted milk products: These include beverages like malted milkshakes, made using malted milk.

Production- Function- The technical law relating inputs to outputs has beengiven the name of production function. Production function expresses the relationship between physical input and physical output of a firm for a given state of technology.
Law of Variable Proportion or Law of Diminishing Returns (Short Run Production Function)
This law explains the relationship between inputs and outputs in the short period. According to this law, output can be changed by altering variable factors (such as labour and feed) while keeping other factors (such as land and infrastructure) constant. The law states that with an increase in variable factors, keeping other factors constant, total product initially increases at an increasing rate, then increases at a diminishing rate, and finally starts decreasing.
1. Total Product (TP) - Refers to the total output of the firm per period of time.
1. Example: Total litres of milk produced by a dairy farm per day.

2.1 Introduction
The continuous production of dry milk has become consistently significant within the dairy industry and is expected to continue growing due to its advantageous features. These include improved shelf life, reduced storage
requirements, and lower transportation costs, all of which contribute to favourable economic outcomes.
For example, non-fat dry milk is also known as skim milk powder, dried skim milk, non-fat dry milk solids, or dehydrated skim milk. Similarly, products like dried whole milk, dried cream, and dried buttermilk are often regarded as dried or powdered whole milk, cream, and buttermilk, respectively, based on their specific compositions.
2.2 Types of Dried Powder
1. Nonfat dry milk
2. Dry whole milk
3. Dry buttermilk
4. Dry whey
5. Dry ice cream mix
6. Dry creams (sweet or sour)
7. Dry skim milk vegetable fat products
8. Malted milk Powder
9. Cheese powders (Cheddar, Blue, etc.)
10. Sweetened chocolate flavoured non fat dry milk
11. Coffee creaming products
12. Sodium or Calcium Caseinates
13. Dry high acid milks
14. Partly skim milk powder
15. Infant milk food

Supply is the amount of a good or service sellers are willing to offer for sale at a specific price, in a specific market, over a specific time.
Stock vs. Supply
• Stock: All the milk a farmer has—say, 1,000L in tanks.
• Supply: What he sells—500L at Rs 50/L today. Supply is different from stock, as stock refers to the total quantity of a commodity that exists in the market, while supply is the quantity that is usually offered for sale at a particular price.
Law of Supply
The law of supply explains the functional relationship between the price of a good and its supply. When all other factors remain constant, an increase in price leads to an increase in supply. This means there is a direct proportional relationship between price and supply.
Exceptions
1. Land, rare goods, and labour supply in certain cases do not follow the law of supply.
2. The supply of rare goods cannot be changed with price fluctuations.

1.1 Introduction
Concentrated milks, like evaporated milk and sweetened condensed milk, serve as practical substitutes for fresh milk in regions where access to it is limited or where transportation and storage are challenging. These products go through specific processing techniques to reduce their water content, thereby improving their shelf life and transportability. Evaporated milk is created by removing water through evaporation and then
sterilizing it to prevent microbial growth. This process results in a thicker consistency and a slightly caramelized flavor due to the heat treatment. On the other hand, sweetened condensed milk is made by adding a significant amount of sucrose to the milk and excluding oxygen, which inhibits microbial growth. This results in a thick, sweet product suitable for various culinary uses. These concentrated milk products are usually packaged in small cans, making them convenient for storage and transportation. However, they are sometimes diluted before consumption with water to resemble the taste and consistency of fresh milk. In regions where even concentrated milks are not easily accessible, alternatives like whole milk powder or recombined milk are used. These alternatives involve dehydrating milk into powder form or reconstituting milk components to create a liquid similar to fresh milk. Innovations in processing and packaging have led to the development of alternative uses for concentrated milks, expanding their versatility beyond traditional applications. These products continue to provide essential dairy
nutrition in areas where fresh milk is scarce or hard to obtain, offering a shelfstable solution to meet dietary needs.

Definition of Utility
Utility is the ability of a good or service to satisfy human wants and needs in economics. It is an important concept as it represents the satisfaction experienced by a consumer from consuming a good or service
Utility characteristics
1. Measuring satisfaction, benefit, or happiness from a good or service is difficult.
2. Economists have devised ways to represent and measure utility in terms of economic choices that can be quantified.
3. Total Utility (TU): The aggregate sum of satisfaction or benefit gained from consuming a given amount of goods or services (e.g., drinking three glasses of water provides more satisfaction than just one).
4. Marginal Utility (MU): The additional satisfaction gained from each extra unit of consumption (e.g., the first glass of water gives maximum satisfaction compared to each additional glass).
5. Total utility usually increases as more goods are consumed.
6. Marginal utility typically decreases with each additional unit consumed, demonstrating the Law of Diminishing Marginal Utility.