eChapters

Crop nutrition / plant nutrition refers to the inter relationships of mineral elements in the soil and their role in plant growth and development. This inter relationship involves a complex balance of mineral elements essential and beneficial for optimum plant growth.

Plants require certain element for their growth and development. There are about 60 chemical elements present in the plant and it doesn’t mean that all are essential for normal growth and development.

Arnon and Stout (1939) proposed criterion of essentiality. Which were refined by Arnon (1954) and are popularly known as Arnon’s criteria of essentiality. They are:

1. INTRODUCTION

Agriculture plays a crucial role in addressing the needs of a growing global population, and is inextricably linked to poverty eradication, especially in developing countries. Sustainable agriculture and rural development are essential to the implementation of an integrated approach to increasing food production and enhancing food security and food safety in an environmentally sustainable way. Attaining food security has been our major concern since independence. Appropriate policy measures in agriculture made it possible to achieve food security as well as required national confidence to meet the growing food demands, despite a growing population. The increased agricultural production has been achieved largely through an increase in the yield of grain per hectare, rather than from an increased cultivated area. The increase in production has been the result of widespread cultivation of new high-yielding varieties coupled with a package of agricultural inputs that permit the genetic expression of their high yield potential. India is now even in a position to export agricultural commodities, fish products, milk products and earns a lot of foreign exchange. The present share of the agricultural sector in total exports is 15 to 17 percent. However, the export of many agricultural commodities show a high degree of fluctuations, caused by time lags between production decisions and delivery to the market. For the Government, unforeseen variations in export can complicate budgetary planning and increase risks for attainment of debt targets. For exporters, price volatility increases cash flow variability and reduces collateral value in the market. There is a need for an aggressive export growth-oriented policy to raise the share of agricultural sector in total exports to 25%. This should come through diversification of agriculture. In our country, the exports have been allowed only after domestic requirements are met, which is the major cause of fluctuations in exports from year to year. Modelling and forecasting such fluctuating data of commodities is crucial for the sake of Government as well as for the exporters.

ABSTRACT

Intellectual property rights (IPR) have, in recent years, emerged as perhaps the most important aspect of legal system as far as protection of inventions is concerned. Intellectual property rights have been created to ensure protection against unfair trade practices. The protection of intellectual property rights (IPR) could be a means to acknowledge a creator for something new or it could be means to recover the financial investments of a financer. IPR ensures that the knowledge, innovation and capital involved in the development of a product/ technology are compensated with highest rewards, insufficient protection of IP will lead to fewer rewards and even some of the inventions will be driven to extinction. As a result the innovators may conveniently relocate to regions where they can protect the IP they develop, the latter will result in intellectual loss to a particular country. Knowledge management on the other hand, emphasizes the challenge behind effective management of innovation systems by providing protection to databases, learning tools and sharing process that innovators have developed over a period of time. Effective Knowledge management provides platform for sharing of technologies through licensing and cross-licensing agreements between different countries. The chapter deals with the fundamentals of intellectual property, its types, the applications of different categories of intellectual property in the area of science and technology including biotechnology, literature and arts, and the commercial value of intellectual property assets. Moreover, protecting traditional knowledge through the intellectual property rights and identification, documentation transmission revitalization and promotion of cultural heritage by traditional knowledge has been discussed.

Abstract

The Himalaya is one of the youngest and the richest mountain ecosystems encompassed with a variety of species of both flora and fauna. Varying in climatic conditions coupled with altitudinal gradients and unique topography leads to the formation of different types of forests, which varies from tropical to the temperate and alpine to no timber line zone and snow-clad meadows. The present study aimed to investigate the potential of medicinal plants growing in valleys and mountains of district Doda to cure various ailments of the local inhabitants including animal health care. A total of 113 species belonging to 104 genera and 55 families of angiosperms, gymnosperms and cryptogams (lycophytes and ferns) were recorded and reviewed from published documents used for treatment of different diseases in the regions. Out of the total 113 species, 17 species were of trees, 14 species were shrubs, 78 types of herbaceous plants and 4 species of climbers. Asteraceae, Lamiaceae, Rosaceae, Ranunculaceae, Polygonaceae, Solanaceae, Apiaceae, Pinaceae, Fabaceae and Berberidaceae were recorded as the dominant families of the study area. The data were collected while interacting with local people as they possess rich traditional knowledge regarding the use of different herbal plants and medicine.

Abstract

Medicinal plants growing around us are the biggest gift to mankind from the nature. They grow abundantly and over centuries, humans have learned how to utilise plants for the treatment of illness. The great Himalayan belt is home to many endemic medicinal plant species. These plants are the rich source of traditional medicines and form a basis for livelihood of rural and indigenous populations. The present study is aimed to investigate the medicinal wealth of Bani valley that lies in Kathua district, (J&K) which is a part of Western Himalaya. Due to varying climatic conditions, terrains and forest types, the valley is home to various endangered and endemic medicinal plant species. A total 231 plant species belonging to 69 families ranging from angiosperms, gymnosperms and cryptogams (lycophytes and ferns) were documented by frequent field surveys and reviewed by published literatures and floras. Out of 231 plant species, herb species were 142, shrub species were 43 and tree species were 46. Asteraceae was recorded as dominant family followed by Fabaceae, Lamiaceae, Rosaceae, Polygonaceae, Ranunculaceae, Poaceae, Solanaceae, Acanthaceae and Urticaceae. Ethnobotanical data used for various ailments and diseases were obtained from local tribes.

Abstract

Climate change is well acknowledged fact globally and in India has been witnessed with more frequent cloud bursts, highly variable frequency and distribution of rainfall, high seasonal thermal variations, receding glaciers and unstable agricultural production. Likely impact of climate change is expected to reduce agricultural productivity, production stability and incomes in some areas that already have high levels of food insecurity. However, Agriculture has the potential to retard the pace of climate change by capturing a significant part of the excess atmospheric carbon in the soil and plants in the form of organic matter and also competent to reduce emissions of nitrous oxide and methane if practiced in smart ways so developing climate-smart agriculture is thus crucial in achieving future food security and climate change goals. Transformations are needed in both commercial and subsistence agricultural systems, but with significant differences in priorities and capacity. Several climate smart agriculture practices such as cropping system improvement (e. g. crop rotation, diversification, improved varieties and integration of legumes), integrated nutrient management (e.g. green manure, compost and site specific nutrient management), resource conservation (e.g. minimum/zero tillage, keeping the land consistently covered with crop residues), precision water management (e.g. planting crops in bed, laser land leveling, mulching with crop residues) and agro-forestry have been proposed for adaptation to climate change and variability. However, their adoption decisions by the farmers are largely dependent on economic benefits associated with the interventions. It should be clearly understood that climate smart agriculture does not make use of different practices but certainly it uses them differently.

ABSTRACT

Losses and benefits in agricultural production are associated with various weather parameters. So prediction of weather systems in different spatial and temporal scale over the Indian region therefore assumes considerable socio-economic importance. Meteorological information also plays an important role in the following operations in agriculture. The meteorological services can help the farmers & the planners exploit the potential of good weather and minimize the impact of bad weather as there exist tremendous opportunities for applications of meteorology in both day to day and long term planning in agriculture and such applications could contribute substantially to promote sustainable agriculture and poverty alleviation and the management of agrometeorological data is the key to these applications. Therefore, the area and input intensive agriculture is leading us into an era of unsustainable agricultural growth as the crucial components of sustainable agricultural production and distribution system such as integration of natural biological cycles and controls; protection and renewal of soil fertility and the natural resource base; optimization of the use of nonrenewable resources and of on-farm & off- farm inputs; ensuring dependable farm income. Hence, the meteorological information may help the farmer make the most efficient use of natural resources, with the aim of improving agricultural production both in quantity and quality. It becomes more and more important to supply meteorological information blended with weather sensitive management operations before the start of cropping season in order to adapt the agricultural system to increased weather variability. Subsequent to this, weather forecast based Agro-meteorological advisories become vital to stabilize their yields through management of agro-climatic resources as well as other inputs such as irrigation, fertilizer and pesticides. The main emphasis of the existing AAS system is to collect and organize climate/weather, soil and crop information, and to amalgamate them with weather forecast to assist farmers in taking management decisions. This has helped to develop and apply operational tools to manage weather related uncertainties through agro-meteorological applications for efficient agriculture in rapidly changing environments. Hence, weather information and advisories have assumed greater significance under the increased variability in the changing climate. Thus, Weather forecasting and advisory has become an indispensable aid for sustainable agro-transformation

11.1 INTRODUCTION

Plant growth regulators have remained an important component in horticulture from time immemorial because they were effective means of quantitative as well as qualitative improvement in growth and development of crops. Plant Growth Regulators (PGR) are diverse group of organic compounds other than nutrients, produced artificially or by plants which in low concentrations promote, inhibit or modify the physiological process in plant. The term includes both naturally occurring phytohormones as well as synthetic compounds. These are produced naturally in higher plants, controlling growth or other physiological functions at a site remote from its place of production and active in minute amounts. Plant Growth Regulators are used in different forms like liquid, powder, paste etc. “Hormone” is Greek word derived from “hormao”, which means to stimulate. Thimone (1948) suggested the use of term ‘phytohormones’ as the organic substance, which are produced naturally in plants, synthesised in one Part And usually translocated to other part wherein every small quantity affects the growth and other physiological function of the plants. To distinguish them from the animal hormones they are termed as phytohormones. Auxin was the first hormone to be discovered in plants and at one time considered to be only naturally occurring plant growth hormone. The role of plant growth regulators in various physiological processes such as seed germination, f lowering, fruiting, seed development, fruit ripening and yield etc. in different crop plants is well established (Kiran et al., 2011). There are five classical phytohormones: auxins, gibberellins, cytokinins, ethylene and abscisic acid. Besides classical phytohormones a variety of other compounds that play roles in plant growth and development have also been identified, including jasmonic acid, salicylic acid, brassinosteroids and polyamines (Basra, 2000). The application of plant growth regulators in agriculture has started in 1930 in the United States. Ethylene, a naturally occurring substance, is one of the first plant growth regulators being discovered and used successfully for enhancing f lower production in pineapple (Fishel, 2006). Its toxic effects to human beings are low.

Maize (Zea mays L.) is one of the most versatile crops having the highest genetic yield potential among cereals and wider adaptability under varied agro-climatic conditions rightly earning it the name of ‘the queen of cereals’. Maize is cultivated in all agricultural areas around the world and is an economically significant crop for all human population. It is grown from 58⁰ L north to 40⁰ L south and extends from the sea level up to an altitude of above 3,800 m; covering regions with rainfall varying from 250 to 10,000 mm (Hallauer and Miranda, 1988). Globally, maize occupies an area of about 184.0 million ha with production of 1065 million tons and productivity of 55.2 q/ha (FAOSTAT, 2014). It is the third most important cereal crop and a major source of energy, protein and other nutrients for human and livestock in the world (Jompuk et al., 2011). India is the second most important maize growing country in Asia, and now ranks as the world’s fifth largest consumer of maize. It is an important cereal crop in India covering an area of 9.42 million ha with a production of 24.35 million tonnes and productivity 25.83 q/ha (Anonymous, 2015). Maize is cultivated in the country throughout the year mostly during rainy or Kharif season (June to September, 80%) followed by winter or Rabi (November to April,18%) and spring (February to May, 2%) for various purposes including grain, fodder, green cobs, sweet corn, baby corn and popcorn.

Maize is one of the most important cereal crops of the world. Being a C₄ plant, it is physiologically more efficient than rice, wheat and other important cereal crops which belong to C₃ category. In Punjab, traditionally, maize is grown during Kharif season but from last few years the area under spring maize is increasing because its cultivation is highly profitable and commercially viable after harvesting of potato crop. No doubt, Punjab has been the leading state in contributing to the national food security but simultaneously paddy-wheat rotation resulted in depletion of underground water, deterioration in soil health and environmental pollution. These problems need to be addressed for the sustainability of these natural resources and at the same time meeting the food grain production for the ever-increasing human population. Under such circumstances, maize crop is a viable alternative to replace some area occupied by rice and can help in breaking rice–wheat dominant cropping pattern in the state. Promising maize hybrids possessing high grain yield potential and offering comparable economic returns to the farmers are available with Punjab Agricultural University as well as with the private sector.

In Punjab, maize is commonly used in the form of chapatis, boiled or roasted green cob, breakfast food like cornflakes, popped grains etc. Maize chapatis are used as a delicacy with saag. The high carotene content of yellow grained maize is considered very useful in imparting yellow colour to egg yolk. Therefore, a substantial quantity of maize grain is utilized as an important ingredient of animal/ poultry feed industry. The use of maize grains for such purposes is going to increase as poultry and dairy industries are expanding. Maize plant is extensively used as green as well as dry fodder. The digestibility of maize fodder is better than sorghum, bajra and other non- legume forage crops. Maize plant does not have any anti quality factor hence can be fed to cattle at any stage. Maize can be utilized as an industrial raw material for number of industries viz., starch, ethanol, rubber, paper, cosmetics and pharmaceuticals etc. Quality Protein Maize (QPM) can be promoted for nutritional security of poor masses whereas pop corn, baby corn and sweet corn can help in increasing the farm income due to high market value. In Punjab, major industries which are utilizing maize are The Sukhjit Starch & Chemical Limited, Kapurthala, and M/s Field Fresh Food Pvt. Ltd, Ladhowal, Ludhiana.

Maize production in India has been dominated by erstwhile Andhra Pradesh and Karnataka which together contribute around 38 per cent of the total maize production of the country. Erstwhile Andhra Pradesh has achieved the highest mean yield of 4441 kg/ha in the country during the last decade (2001-02 to 2010-11) by surpassing Karnataka which had the highest productivity in the country, earlier. The main reason for achieving the highest productivity in the country was due to adoption of improved production technology along with 100% area grown under hybrids. In Telangana, maize is the third most important crop after rice and cotton. It is cultivated in 5.74 lakh hectares, predominantly in Kharif season (4.54 lakh ha), with a productivity of 3.69 t/ha (2015-16).

Trends in maize area, production and productivity in the state (1950 to 2016)

The erstwhile Andhra Pradesh (including Telangana) is the non-traditional maize growing state. But, the climate of the state is very favorable for the crop and hence maize can be grown in any season in the state. However, it is mainly grown as a rainfed crop during monsoon season, concentrated in Telangana. The trends in area, production and productivity of maize in erstwhile Andhra Pradesh have shown a remarkable increase during the past six decades. During 1955-56, the maize acreage in the state was very less (1.89 lakh ha), which has been up by 5.3 times to the present (2014-15) level of 9.95 lakh hectares. The production has also increased dramatically from merely 1.14 lakh tonnes during 1955-56 to 42.36 lakh tones during 2014-15, which is nearly 37 times higher. Similarly, the productivity of maize in the state was merely 601 kg/ha during 1955-56, which has been increased to 4257 kg/ha during 2014-15 (Fig. 1).

Improved Varieties of Leafy Vegetables

A. AMARANTHUS

Introduction

Organic farming per se is not a new concept rather is an age old practice of cultivation crops without synthetics. However, in modern usage it is a type of farming without synthetics but at the same time taking advantage of all the modern agriculture technologies like soil testing, nutrient management, ecofriendly pest management, etc. developing and developed world have different incentives for taking up organic farming. Growing health consciousness among the people of developed world is the prime motive behind interest in organic farming. However, conversion of “by default” organic agriculture into “certified organic” is perspective in the developing world so that farmers get price premium. Whatever the case may be, the area under organic farming as well as demand for organic food/product is increasing both in developing as well as in the developed world.

Organic production is a systems approach. Although many aspects of vegetable production remain the same in both “organic” and “non-organic” or “conventional” systems, there are differences. The major components of production which differ between these two systems include transplant production, soil fertility management, and insect, disease, and weed management. “Organic” usually refers to a crop management system that promotes biodiversity, biological cycles, and soil biological activity. Organic production concentrates on natural processes and how to manage them. Other materials and products are additions to, not replacements for, management. An organic system takes time to develop. It may be achieved in stages, for example by starting with organic soil amendments and other soil improving procedures. Then, try biological control of pests, some companion plants, etc. Eventually, the entire system will be changed. It will take years to convert to a healthy organic system.

Due to increase in population, rapid urbanization, industrialization and shrinking land holdings, there is tremendous pressure on availability of land resources for agriculture, which results in decreased arable land area year after year. The huge gap between present production and future requirements necessitates intensive vegetable production and availability at affordable prices. Vegetable production can be enhanced either by increasing productivity, use of improved cultivars and ago-techniques, bringing additional land under vegetable crops or by promotion of protected cultivation. By adopting protected cultivation, year round availability of quality produces both for domestic use and export can be assured.

Several biotic and abiotic stresses are the major factors responsible for low productivity and poor quality in large number of vegetable crops under open field cultivation more specifically during rainy and post rainy season. The increasing demand of off-season and high quality vegetables in various markets of the big cities had call the attention of the vegetable growers for diversification from traditional ways of vegetable cultivation to modern methods of vegetables cultivation in an agri-business entrepreneurial models. Under the new era of FDI (Foreign Direct Investment) in retail these kinds of models are having high potential for betterment of the farmers opting for quality and offseason vegetable cultivation through protected cultivation. Protected cultivation structures are useful for combating both biotic and abiotic stresses that limits the productivity and quality of vegetable crops. This requires careful planning, attention and details about timing of production and moreover, harvest time to coincide with high market prices, choice of varieties adopted to the off season environments, and able to produce economical yields of high quality produce etc.

The immediate and long-term objective of modern plant breeding in all countries irrespective of the state of their advancement is increasing the availability of food to meet the calorie-protein requirement of their people. In the past, breeders have concentrated their efforts on increasing the yield of the important crop species. Better adaptation to local environmental conditions, high production and better resistance to the major pests and diseases have been among the priority goals of genetic plant improvement. Yielding ability and stability undoubtedly deserve high priority but enough attention also needs to be paid to improving nutritional characteristics of the plant produce for their maximum utilisation. Awareness of nutritional requirements and the optimal characteristics of crop products to be utilised as food and feed, therefore, becomes an important parameter of breeding effort.

The main source of food in the developing world is cereals which provides 45 to 85 per cent of the total calories and 50 to 80 per cent of the total protein requirements. The consumption of animal proteins, which are nutritionally well balanced, is low and costly and beyond the reach of the low income groups. On the other hand, plant proteins are cheaper to produce and easier to store and transport. All these factors go in favour of increasing the quantity and quality of cereal proteins in order to improve the dietary and nutritional status of the masses in the developing world.

Proteins are made up of about twenty different amino acids. For man, eight of these amino acids, valine, methionine, leucine, isoleucine, threonine, phenylalanine, lysine and tryptophan, are essential (EAA) for constituting a well balanced diet. In impioving the grain quality of cereals consideration should, therefore, be given apart from the content of carbohydrates, fats, minerals and vitamins in the grains, to improving the protein content as also the amino acid composition of the protein.

Remote sensing images have an important characteristic known as spatial frequency. Spatial frequency is defined as the number of changes in pixel value per unit distance. Few changes in pixel or brightness value over an area in an image are known as low spatial frequency area like agricultural fields, forests, water bodies, etc. If the changes are large, then it is known as high frequency area like roads, built up areas, etc. Spatial filtering is an approach for extracting quantitative spatial information by taking into account the neighbouring pixel values along with the independent pixel value. Therefore, filtering is a technique for modifying or enhancing an image. Filtering is done to improve the interpretability of raster image or to extract certain information from them. It is a neighbourhood operation because the value of any pixel in the output image is determined by applying certain algorithm on the neighbourhood pixels of the corresponding input pixel. The nature of algorithm to be applied depends upon the information which user wants to derive from the raster image. Filtering operations are mainly done for smoothening, sharpening, noise removal and edge enhancement. A filter is a kernel of small array which is applied to input pixel and its neighbouring pixels in the raster. There are many types of filters which can be applied to a raster image in R. These types with their respective R – code examples are explained further.

Elevation or height data of land surface above a defined vertical datum is stored in the form of raster grids which is known as Digital Elevation Model (DEM). The DEM data can be processed to derive many useful parameters like slope, aspect, curvature, roughness, etc. This process of quantitatively describing terrain obtained from DEM data through computation of many variables is known as Digital Terrain Analysis. Digital terrain analysis has applications in the various fields like hydrology, ecology, geomorphology, etc. DEM data for digital terrain analysis are available from the satellites like ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer), Cartosat, ALOS (Advanced Land Observation Satellite), and SRTM (Shuttle Radar Topography Mission).

In this exercise, we are going to discuss the derivation of some primary and secondary terrain attributes from DEM data in R software. For performing digital terrain analysis in R, following packages are required.

Climate and Ornamental Crops

There are many factors which affect the production of the ornamental crops. It may be internal or external factors. Climate and soils are the chief natural factors on which the success or failure of ornamental crops production is dependent. A knowledge of the effect of various soil and climatic conditions on ornamental crops production is very essential for every prospective to grower, climate includes several factors like temperature, relative humidity, rainfall, wind, hail, light whereas, soil covers such factors as moisture supply texture, pH etc.

Temperature: The rate of development of a plant (the leaf unfolding rate) is a function of temperature. As temperatures increase, the leaf unfolding rate increases. If the temperature exceeds the maximum temperature, plants experience stress and leaf unfolding rate declines. Given the high costs of fuel, many growers are tempted to reduce the greenhouse temperature to save money on fuel. Because the rate of crop development is dependent on temperature, reducing temperatures increases production time of all crops. However, some crops will be more severely delayed than others. Reducing temperatures from 20°C to 16°C increased time to flower of Salvia farinacea by 13 days. This same temperature drop only increased days to flower of pansy by four days. For crops that are severely delayed by lower temperatures, reducing the growing temperature may actually increase total fuel costs for producing that crop. Every plant has fairly well defined range of temperature to which it is tolerant and below which the plants of that variety are liable to be injured to a more or less extent.

The process of replacing the existing mature forest with a new generation of the forest trees is called forest regeneration. It can also be defined as process by which new tree seedlings become established after forest trees have been harvested or have died from fire, insects, or diseases. Forest regeneration is one of the basic tasks of foresters. Regeneration plays such a prominent role in silviculture that most silvicultural systems are named for their method of regeneration.

Nematode Control

Plant parasitic nematodes can be controlled by several methods. The nematode control aims to improve growth, quality and yield by keeping the nematode population below the economical threshold level. The control measures to be adopted should be profitable and cost effective. It is essential to calculate the cost benefit ratio before adopting control measures.

The nematode control methods are

1. Regulatory (Legal) control
2. Physical control
3. Cultural control
4. Biological control
5. Chemical control

There is need to find better ways and solutions to mitigate future agricultural challenges toward increasing productivity across the crops and equip them with the desirable genes for resistance to biotic and abiotic stresses and to mitigate the impact of climate change and also to make them nutritionally superior. Here comes “Plant Genomics”—a newly evolved discipline of plant sciences—targeting to decode, characterize, and study the genetic composition, structures, organizations, functions, and interactions/networks of all plant genes in a genome-wide scale. Being evolved from plant molecular genetics, biology, and biotechnology, plant genomics represents the key sub- divisions of structural, functional, comparative, evolutionary, physiological, and genetical genomics. Its development and advances, however, are tightly interconnected with plant science sub-disciplines, such as proteomics, metabolomics, epigenomics, phenomics, metagenomics, transgenomics, breeding-assisted genomics, bioinformatics and system biology as well as modern instrumentation and robotics sciences.

Plant genomics is a recent convergence of many sciences. Simply stated “Genomics” is the new science that deals with the discovery and noting of all the sequences in the entire genome of a particular organism. The genome can be defined as the complete set of genes inside a cell. Genomics, is, therefore, the study of the genetic make-up of organisms. Determining the genomic sequence, however, is only the beginning of genomics. Once this is done, the genomic sequence is used to study the function of the numerous genes (functional genomics), to compare the genes in one organism with those of another (comparative genomics), or to generate the 3-D structure of one or more proteins from each protein family, thus offering clues to their function (structural genomics). In crop agriculture, the main purpose of the application of genomics is to gain a better understanding of the whole genome of plants. Agronomically important genes may be identified and targeted to produce more nutritious and safe food while at the same time preserving the environment. Genomics is an entry point for looking at the other ‘omics’ sciences. The information in the genes of an organism, its genotype, is largely responsible for the final physical makeup of the organism, referred to as the “phenotype”. However, the environment also has some influence on the phenotype. DNA in the genome is only one aspect of the complex mechanism that keeps an organism running – so decoding the DNA is one step towards understanding the process. However, by itself, it does not specify everything that happens within the organism. The basic flow of genetic information in a cell is as follows. The DNA is transcribed or copied into a form known as “RNA”. The complete set of RNA (also known as its transcriptome) is subject to some editing (cutting and pasting) to become messenger-RNA, which carries information to the ribosome, the protein factory of the cell, which then translates the message into protein.

Abstract

Mungbean [Vigna radiata (L.) Wilczek] is an important pulse crop grown in India. It is a short duration annual with yellow flowers and fuzzy brown pods. Majority of the mungbean grown in India is under rainfed conditions and the productivity of mungbean is not upto the mark to meet the daily dietary requirement of a populous country like India. The biotic and abiotic stresses in mungbean, majorly MYMV, powdery mildew, drought, salinity, water logging etc leaves a severe yield loss in mungbean crop. Among them, MYMV and powdery mildew diseases show yield losses accounting upto 85% and 40%, respectively in severe conditions. The present review paper is based on the study of both biotic and abiotic stresses and the recent advances in breeding for resistance to stresses. A detail explanation of major diseases and insect pests affecting mungbean are discussed along with the information of genomic resources and research done in mungbean in recent years. Recently SSR’s have been using widely for all molecular level research work like genetic diversity, constructing linkage maps for identifying QTL’s, marker assisted breeding etc. in mungbean. The resistant varieties developed against these biotic and abiotic stresses are listed which are very important for attaining a prominent yield in mungbean.

Introduction

Cooking accounts for a major share of energy consumption in developing countries. Fifty per cent of the total energy consumed in India is for cooking (Fritz 1981). Most of the cooking energy requirement is met by non-commercial fuels such as firewood (75%), agricultural waste and cow dung cake (25%) in rural areas. The fuel wood requirement is 0.4 tons per person per year in India. In rural areas firewood crisis is far graver than that caused by a rise in oil prices. Marginal villagers have to forage 8 to 10 hours a day in search of firewood as compared to 1 to 2 hours ten years ago. One third of India’s fertilizer consumption can be met if cow dung is not burnt for cooking and instead is used as manure. The cutting of firewood causes deforestation that leads to desertification. Fortunately, India is blessed with abundant solar radiation (IMD, 1985). The arid parts of India receive maximum radiation i.e. 7600-8000 MJ m^-2 per annum, followed by semi-arid parts, 7200-7600 MJm^-2, per annum and least on hilly areas where solar radiation is still appreciable i.e. 6000 MJm^-2 per annum. Therefore, solar cookers seem to be a good substitute for cooking with firewood.

Principle of cooking

The different methods of cooking of food are boiling, frying, roasting, and baking. For boiling of rice, lentils etc. the temperature of food being cooked is about 100° C while for other methods, high temperatures are required. Heat is supplied at the bottom of the vessel for frying and boiling purposes in conventional cooking. Roasting and baking is generally performed on open fire or in ovens, wherein food is surrounded by hot surfaces and heat is transferred to the food by radiation and convection.

Pants that tend to climb vertically on to supports are called climbers. reepers are plants that tend to creep or ramble over the ground or other surfaces spreading horizontally. These have showy flowers or decorative foliage. Climbers are conventionally used in gardens to cover fences, bare walls and tree trunks. They are used to provide ornamentation in a vertical aspect. Creepers on the other hand are used as ground covers and function as decorative elements in a horizontal aspect.

CLASSIFICATION OF CLIMBERS AND CREEPERS

Depending upon their habit, vigour, duration, nature of flowering, adaptations for climbing and shade tolerance, they can be classified as follows:

These are a broad group of plants that have evolved in situations characterized by very high day temperatures and low night temperatures with very low available moisture in the growing medium. Their plant body is modified to conserve moisture with physiological adaptations that help to reduce moisture loss considerably and to survive in hot desert situations or drought conditions. Stems, leaves and roots of these plants are fleshy and rich in watery mucus. The unusual morphological features that these plants have developed to enable them to survive in their harsh native habitats, set them apart from other plants and have given them rarity value when grown as ornamentals. They are hence displayed individually or grown in a rockery where a landscape of rocks and stones highlight their features and at the same time provide desirable contrast with other garden plants. Many members of Cactaceae, Crassulaceae, Aizoaceae, Euphorbiaceae, Asphodelaceae and Agavaceae belong to this group and are commonly referred to as rock garden plants.

The modern or climate controlled greenhouse requires massive inputs of energy and cost of claddings to grow crops out of season making them high cost structures. However, growing of certain horticulture crops and their nurseries out of season is happening in a sustainable way, using the heat from the sun and soil too. These are called passive solar greenhouses designed to retain as much warmth as possible. This concept has revolutionized vegetable production in Ladakh, high altitudes and other parts of the country in winter months.

The solar greenhouse is especially successful in China and are contributing mainly in vegetable production. Solar passive greenhouses are designed in different shape size using different local and other materials keeping in view the local climate and terrain. The poly houses mentioned earlier such as, low cost polyhoses, Ladakhi poly house, solar trench, polyench are passive solar green houses. Being the opposite of the climate controlled greenhouse, the passive solar greenhouse is heated all-year round with solar energy alone, even when the outdoor temperature drops below freezing point. The indoor temperature of the structure can be higher than the outdoor temperature. The temperature can be around 25°C (45°F).

Such greenhouses have been experimented by Defence Research and Development Organization through its establishment FRL (Field Research Laboratory) now DIHAR (Defence Institute of High Altitude Research), Leh/ Ladakh since 1962 during November to the end of March, the period during which the outside temperature drops there below freezing. The average temperature in the coldest month is between -15°C and -18°C. Over the several decades of research different and effective designs of such greenhouses have been standardized which are suitable to produce fresh vegetables like most of the leafy vegetables, tomato, cole crops and potato at sub zero temperature.

1.1 INTRODUCTION

Horticulture is defined as “The science and art of growing vegetables, fruits, flowers, ornamental plants and landscaping of gardens and surroundings in small and commercial gardens”. The word ‘horticulture’ has been derived from Latin language and consists of two parts, viz., ‘hortus’ means garden and ‘cultura’ means cultivation. Thus, the word ‘horticulture’ means garden cultivation. Horticulture basically deals with Pomology, Olericulture, and Floriculture and Landscaping. Horticulture is gaining importance as it gives more returns per unit area and also gives nutritious food to human beings thereby improves quality of life and enhances the aesthetic beauty of nature. Vegetable growing is one of the major branches of horticulture with respect to value of the products.

In technical sense all parts of vegetables are used for consumption. The term, however, is usually applied to the edible plants which store up reserve food in roots, tubers, bulbs, stems, petioles, leaves, buds, flowers, fruits, and seeds which are eaten either cooked or raw. Growing vegetables is not only important for providing the protective food but also serve as an important subsidiary food playing a more significant role in the food consumption. They are rich in nutrients and are essential components of a balanced diet.

16.1 Entering Biological Data into Computer

After the forms have been designed, the database in ready for entry of biological data. Biological data is entered one record at a time. To enter the biological data, the user issues a command, which calls up and displays the appropriate form with blank fields. The user then keys in the data for each field in the appropriate spaces. In this manner, the user enters the data for the first record, then for the second record, and so on. In most database systems, the records are automatically assigned a number as they are entered.

16.2 Saving Biological Data into Computer

While entering data into the fields, the tab key or enter key is usually used to move to the next field. Pressing enter or tab key in the last field on the form saves the record in the database and moves to a new, blank form for the next record to be entered. In addition to using the tab or enter key to move forward through fields, one can directly go to any field on the form at any time by clicking on it with the mouse.

Methods of Weed Control

Prevention, eradication and control are the fundamental principles of weed control.First basic step is to prevent the infestation of a weed(s) in a locality in order to avoid their further spread. If one fails in preventing spread of weeds, eradication step must be adopted. Eradication is limited on a very small scale and adopted only when suitable methods of complete weed removal are available as eradication is cent per cent control of weeds alongwith its root system and other propagative parts. Further, if one fails in prevention and eradication techniques then different weed control methods must be strictly followed in which the objective is to bring down the weed population (with any method) to a level that economical crop yields are possible. The aim of each weed control method is to achieve reasonable good control of weeds. Following methods for controlling weeds are very common:

Preventive Methods

Try to prevent spread of weed seeds/vegetative parts with the adoption of following preventive techniques.

Mode of Action

The term mode of action refers to the sequence of events from absorption into plants to plant death. The mode of action of the herbicide influences how the herbicide is applied. For example, contact herbicides that disrupt cell membranes, such as acifluorfen (Blazer) or paraquat (Gramoxone Extra), need to be applied post emergence to leaf tissue in order to be effective. Seedling growth inhibitors, such as trifluralin (Treflan) and alachlor (Lasso), need to be applied to the soil to effectively control newly germinated seedlings.

To be effective, herbicides must 1) adequately contact plants; 2) be absorbed by plants; 3) move within the plants to the site of action, without being deactivated; and 4) reach toxic levels at the site of action. The application method used, whether pre-plant incorporated, pre-emergence, or postemergence, determines whether the herbicide will contact germinating seedlings, roots, shoots, or leaves of plants.

Mode of Action of Herbicides

Herbicides perform a vital role in the management of weeds. As the name indicates, herbicides are chemicals that kill or control vegetation. Although the ultimate effect of most herbicides is the same (usually death of weed), the way they control weeds is vastly different. Physiologists use the term mode of action to describe the way the herbicides affect weeds. It includes the entire sequence of events that occur from the time the weed absorbs the herbicide to the final plant response (usually death). The term mode of action is the broad term under which all aspects of herbicidal action including the mechanism of action is included, while the mechanism of action refers to only the biochemical and biophysical responses of plants that appeared to be associated with herbicidal action.

Thus, mode of action includes absorption, translocation to an active site, inhibition of a specific biochemical reaction, degradation or breakdown of the herbicide in the plant and soil and the effect of the herbicide on plant growth and physiology.

Although two herbicides may differ chemically, they may still possess the same mode of action example trifluralin (a dinitroaniles herbicide) and propanamide (an amide herbicide) are inhibitors of microtubule/spindle apparatus. Each herbicide family (class or group) has a primary site of action which may be different in its action from others example sulfonylureas herbicides are ALS or AHAS inhibitors while glyphosate and sulfosate are ESPS inhibitors. Some may have more than one site of action, but the mostinhibitory of these will be affected first. The other site(s) may be considered secondary. Fluometuron, a urea group herbicides act by inhibiting photosynthesis at photosystem II and carotenoid biosynthesis.

Status of Women

As per 2011 Census, women account for 586.46 million, and represent 48.5% of India’s total population. However, from global perspectives, they constitute half of global population, and 1/3^rd labour force, but receive only 1/10^th of world income, and own less than 1% of world’s property. Further from national point of view as Reddy et al. (1994) in his study opined that “although women constitute 50 percent of India’s population, perform two-thirds of the work and produce 50 percent of food commodities consumed by the country and they earn only one-third of the remuneration and 10 percent of the property or wealth of the country.

The vast majority of working women are uneducated cultivators and agricultural labourers residing in villages. Most of the women, working on the family farm are unpaid labourers. 63 percent of all educated women with at least a high school certificate are unemployed, and of the 37 percent who are employed 15 percent are clerks, 5 percent teachers, 7 percent nurses and 10 percent are other professionals. Only 6 percent of Government employees are women (Jain, A.K. 2004). Rural Women form the most important productive work force in the economy of majority of the developing nations including India. Agriculture, the single largest production endeavour in India, contributing about 18% of GDP, is increasingly becoming a female activity. Agriculture sector employs 4/5th of all economically active women in the country. 48% of India’s self-employed farmers are women. There are 75 million women engaged in dairying as against 15 million men and 20 million in animal husbandry as compared to 1.5 million men.

Despite progress in several key indicators, a gender analysis demonstrates that women continue to be relatively disadvantaged in matters of survival, health, nutrition, literacy and productivity. Further, more than 90 percent of rural women are unskilled, restricting them to low paid occupations. Women generally have no control over land and other productive assets which largely exclude them from access to institutional credit. Further, agricultural wages for women, on an average 30-50 percent less than those for men. Though they work for longer hours under inhospitable conditions, their participation in decision making process is less than desirable.

Swarnjayanti Gram Swarozgar Yojana (SGSY)

The Swarnjayanti Gram Swarozgar Yojana (SGSY), a programme for the self employment of rural poor was started from 01.04.1999 after restructuring the six erstwhile Integrated Rural Development Programme (IRDP) and its allied programmes, These were : IRDP, Training of Rural Youth for Self Employment (TRYSEM), Development of Women and Children in Rural Areas (DWCRA), Supply of Toolkits in Rural Areas (SITRA) and Ganga Kalyan Yojana (GKY), and Million Wells Scheme (MWS). The basic objective of the SGSY was to bring the assisted poor families (Swarozgaris) above the Poverty Line by providing them income-generating assets through a mix of bank credit and governmental subsidy. The programme aimed at establishing a large number of micro enterprises in rural areas based on the ability of the poor and potential of each area.

Livestock Development Programmes/Schemes

Gausalas

Recognizing the potential of Gaushalas (about 10000) in the country which were engaged in rehabilitation of disowned cattle, the government of India in 1952 set up the Central Council of Govsamvardana (CCG). Some of these gaushalas were providing quality indigenous / crossbreds / heifers / bulls at many places like Nasik, UrliKanchan, Amirtsar, Indore and Ahmednagar. One gaushala at Bombay had completed a century of devoted work in 1986 and had established two institutes, one for research and another for fodder research and grassland development. The Sabarmathi Ashram gaushala founded in 1915 by Mahatma Gandhi near Ahmedabad is now being managed by NDDB and has a training center for AI service including embryo transfer.

Introduction

Advances in food preservation methods have supported the journey of food science from that of a cookery science to a fast growing industrial technology. Food preservation knowledge deals with the way to prevent spoilage and maintenance of quality in foods. Spoilage is the deterioration in quality brought about by inherent biochemical and chemical changes, as well as microbial metabolism during food storage. Basic principles of food preservation (Frazier et al., 2008) remains the same, but newer methods for achieving the goal is added through research fuelled by a consumer demand for fresh-like foods with convenience and safety. Scientific information on novel processing methods are beautifully compiled (Cullen et al., 2011; Da-Wen Sun, 2014; Tokuþoðlu and Swanson 2015; Doona, 2018).

In-depth knowledge of physiological activities of micro-organisms in presence of preservation agents is essential for preparation of safe foods with prolonged shelf life. Besides this, it is necessary to understand the effect of food constituents on microbial resistance against inactivation agents, to identify critical dose requirement. This profound knowledge would also help to understand kinetics of microbial inactivation and to develop mathematical models suitable for a realistic design of process parameters. For better appreciation of the following sections, readers are encouraged to have fundamental knowledge in microbiology and food processing. The sections in this chapter cover advanced microbiological knowledge pertaining to the preservation aspects of food.

Nano-technology refers to technology on a nano- meter scale, specifically less than 100 nano-meters. The novel nano-particles are tiny spheres (fullerenes) or tubes (nanotubes) made from carbon atoms. It facilitates the development of future inventions transversely a vast array of fields. New nano-particles are being made of silicon, ceramic, polymers or even natural ingredients that break down in the body. The characteristics that make these particles functional in the food industry include optical properties, reactivity to temperature, and biodegradability. They can be used as probes or filled with flavorings or nutrients for delivery. Highlights on the categorisation of agriculture with nano- food technology and nutrition are given in Fig 1.

There are three key elements in nano-technology. They are: (1) substances at nano-scale exhibit novel physical and chemical phenomena with novel functions (2) allowing to measure, control and operate material at the nano-scale that transform them to functions. (3) allowing the union of nano scales of materials for exceptional properties.

Drying of the Spices

Drying is an important mode of preservation and it ensures microbial safety of the spices.The main purpose of drying is to increase the shelf storage and make the seasonal spices available round the year with minute losses of nutrients, flavor, taste and color (Maroulis, 2003). During drying, there is a continuous transfer of heat and mass due to the heat application which eventually leads to moisture removal from the product (Akpinar, 2006) (Hashim, 2014). Since, the sensory, nutritional and functional attributes of spices are partially or totally affected by the drying process, the adequate choice of drying technique becomes requisite. There exists a number of conventional drying methods including solar drying (El-sebaii, 2012), freeze drying (Ciurzy nska 2011), vacuum drying (Nadi, 2012), osmotic dehydration,hot air drying and fluidized bed drying (Onwude, 2016). However, these drying techniques lead to poor quality of the spices because of the longer duration of treatment and high amount of energy. To combat with the issues of poor quality, there has been a significant development of the novel techniques, which includes- microwave, ohmic, infrared, pulse electric field, radio- frequency, ultraviolet, ultrasound, supercritical and heat pump heating, in the drying of the agricultural crops. These novel techniques are found to produce higher quality products as compared to the conventional drying techniques (Moses J. N., 2014). The microwave and radio frequency heating technologies are developed in such a manner that they are capable of partial or complete removal of the conventional methods of heating/ drying (Onwude, 2016). The use of these novel techniques has gained a keen attention for the drying purpose of spices. Some of the researchers have also proved that combination of conventional and novel drying techniques leads to better product output.

Abstract

Microbes are ubiquitously found in the environment. Their interaction with other living organisms could either be pathogenic or beneficial in nature. Soil as a rich source of microbes, researchers have extensively studied the plant-microbe interactions. The soil microbes supply the nutrients deficit plants with essential growth elements such as nitrogen, phosphorous, potassium, etc. and improve the texture and quality of the soil. Due to the destructive nature of chemical fertilizers to soil and environment, it was required to generate a more ecofriendly means of increasing the soil fertility. This led to the development of microbes based biofertilizers. The primary benefit of biofertilizers is to promote a healthy soil environment along with supplying essential nutrients to the plant. Again, biofertilizers can be tailor-made according to the specific plant or the climatic conditions. Fungal and bacteria based biofertilizers, either alone or in combinations are formulated for the plants. Lately, liquid fertilizers are increasingly finding their use in the biofertilizer industry due to their ease in manufacture and prolonged effect on plant growth. The scope of this chapter lays on the currently popular biofertilizers and recent trends in the biofertilizer industry.

Abstract

Soil salinity is one of the major environmental stresses affecting crop productivity and soil health drastically, particularly in arid and semi-arid areas. Most of the vegetable crops being salt sensitive, grow poorly in saline and alkaline soils. Soil salinity affects crops mainly due to the osmotic stress and excessive accumulation of toxic ions (Na⁺, Cl^-, and SO₄ ^2-), whereas alkali soils are generally characterized by poor physical conditions due to high concentrations of bicarbonate (HCO₃ ^-) and carbonate (CO₃ ^2-) as well as high exchangeable Na⁺. Excessive concentrations of sodium chloride (NaCl) in soil or irrigation water can induce several morphological, physiological, and biochemical responses in plants leading to stunted growth and yield. This is due to osmotic (i.e., water deficit) and ionic (i.e., Na⁺ and Cl^-) effects on nutrient uptake/translocation and metabolic processes such as nitrogen assimilation, photosynthesis, and protein synthesis. Plant growth promoting microbes (PGPMs) are considered as promising tools to overcome the limitations of salinity on crop growth and productivity. Many PGPMs can enhance tolerance of crops to salt stress by increasing nutrient uptake through better solubilization of nutrients like phosphorus and zinc, and also by production of small peptides, volatiles and metabolites with hormone activities such as indole-3-acetic acid or auxin analogs in the rhizosphere. This chapter discusses the benefits of PGPMs in plant adaptations to salt stress conditions.

Abstract

Potassium (K) is the third most essential macronutrient element for plants. More than 98% of K in agricultural soils are remained as insoluble organic and inorganic compounds or complexes that are unavailable for plant uptake. Nutrition of crop plants are heavily relied on application of expensive inorganic chemical fertilizers, which is a potential cause of environmental pollution. An eco-friendly alternative strategy for plant K nutrition could be the application of K solubilizing bacteria (KSB) as biofertilizer. Plant and soil-associated bacteria from diverse taxonomic genera such as Bacillus, Pseudomonas, Acidithiobacillus, Paenibacillus, Flectobacillus, Arthrobacter, Enterobacter, Sphingomonas, Paraburkholderia etc. have shown high K solubilizing activities and promote plant nutrition in K deficient soils. The mechanisms involved in their activities include acidolysis, chelation, exchange reactions, and enzymatic degradation of insoluble K minerals and other K complexes. However, inconsistency in the efficiency of KSB-based biofertilizer for crop production in diverse ecological settings is still a big challenge. Recent genomics, post-genomics and CRISPR-Cas genome editing approaches seem to be useful for a better understanding the underlying mechanisms of KSB and development of highly efficient K fertilizers for promoting sustainable agriculture. This chapter comprehensively reviews current updates of KSB-based biofertilizer and their potentials for promoting sustainable crop production. The role of genomics and post-genomics approaches for better understanding of the mechanisms of the functions of applied KSB-based biofertilizers in the crop field and mitigation of the existing inconsistency in the efficiency of KSB-based fertilizers are also discussed.

The indigenous ornamental fish which are very popular overseas, are being harvested from the wild and exported. This in the long run, may lead to depletion of stock due to over harvesting of our valued native fish species. Hence, breeding of native fish species is also equally important for a sustainable trade of ornamental fishery and to conserve the natural stock. Some fishes breed naturally with ease, whereas others are bred by artificial techniques like hand stripping and hypophysation. In nature, the fishes are stimulated by changes in environmental factors. These conditions can be simulated to some extent in the aquaria by providing specific biological requirements for spawning.

I. Breeding of Zebra danio (Brachydanio rerio)

Brachydanio rerio is commonly known as zebra danio. The zebra danio, as the name implies, is characterized by a number of bright blue or purple horizontal lines, which run from the head to the caudal fin. This pattern is repeated in the anal and caudal fins too. The flanks have prussian blue colouration and operculum has golden blotches. The dorsal fin of this species has an olive yellow base and there are blue gold markings on the anal fin.

Introduction

Expanding human and livestock population, fast-growing industrial requirements and urbanization are putting ever-increasing pressures on land resources, creating competition and conflicts which results in sub-optimal use of both land and its natural resources. With no additional land for horizontal expansion of agriculture, there is an urgent need to find viable technologies for enhancing productivity and resource conservation on a sustainable basis. In this context, Agroforestry offers huge potential not only to diversify and increase overall land productivity to meet the demands of fuel, fodder, timber, medicine and other non-woody forest products but also to enhance green cover, and reduce the pressure on forest (Chavan et al. 2016; Handa et al., 2016). Agroforestry offers an affordable alternative in place of expensive conventional conservation measures for providing insurance against risks caused due to weather aberrations, controlling erosion hazards and ensuring sustainable production of the land on a long-term basis. The main objective of agroforestry is to take the advantage of complementary relationships between trees, crops, and livestock in such a way so that sustainability, productivity stability, and profitability of the system is maintained. In India, agroforestry practices are important component in the various developmental programmes schemes like Flood Control/Management Programmes, Multipurpose River Valley Projects, Agriculture Development Programmes, Integrated Rural Development Programmes (IRDP), National Watershed Development Programme for Rainfed Areas (NWDPRA), Forestry Development Scheme, Drought Prone Area Development Programme (DPAP) and Desert Development Programme (DDP) from government sector and wood based industry from private sector. After 2000 a transitional shift in agroforestry observed to tackle the ill effects of intensive agriculture, climate change and nutritional security. Under changing climatic scenarios agroforestry rose as a silver bullet to offer not only single benefits but also a basket of multiple benefits. In the present chapter a journey of agroforestry research and developments, region-specific models, area under agroforestry, initiative of government on policy aspects and challenges are elaborated extensively.

Growing foliage and flowering potted plants in the home is a great way to develop an intimacy with the nature. Caring and attending the plants gives us immense pleasure and satisfaction, especially retiring after day long working schedule. Now a days, wide variety of houseplants are available that can accommodate almost any indoor location in terms of available space, light and management factors. Research carried at National Aeronautical Space Agency (NASA) has shown that having plants in the home or office, especially in a closed air-conditioned environment, can be good for your health and well-being.

Our indoor environment

It is surprising to know that our comfort zone environment may have 2-5 times the pollution levels than outside air. Although, the magnitude may vary and could potentially reach 100 times depending upon the size of building, occupants, provision of ventilation, volatile organic compounds (VOC’s) emitted from upholstery and paints. The quality of outside air also determine the indoor air quality that may get mixed-up resulting in elevating the levels of carbon-dioxide (CO₂) and other harmful gases beyond the permissible limit. It has been revealed that the indoor CO₂ levels are substantially higher (3-5 times) than those recorded outdoor. The CO₂ being a narcotic cause drowsiness and loss of concentration leading to decline in performance and productivity of employed staff. This sudden upsurge in CO₂ and other toxic gases evolved from the volatile compounds from paints likely raise the Air Quality Index (AQI) that affects the health and working efficiency of building occupants.

It has been scientifically proved that the equipments installed for ventilating closed environment of residential or commercial buildings are not efficient in removing gases and thereby, to some extent filter only the particulate matter (PM). As per the prescribed standards of World Health Organization (WHO) and American society of heating, refrigeration and air conditioning engineers, the maximum permissible limit for indoor CO₂ is 1000 ppm. The term “Sick Building Syndrome” (SBS) is a very common disorder associated now a dayswith the people working in closed environments, especially that lack ventilation. When the CO₂ levels reach 1500 ppm, symptoms such as sore throat, nasal flow and cough are quite commonly observed among the people, thus affecting their general health and well being. Poor indoor air quality has been a major factor linked to SBS, reducing productivity of employees and also cause impaired learning in children in schools.

Okra or lady’s finger (Abelmoschus esculentus L. Moench, 2n = 2x = 130, family, Malvaceae) is classified as fruit vegetable like tomato, and eggplant and is grown in the tropical and sub-tropical regions of world. Okra growing major countries are India (occupying the first rank), Turkey, Iran, Iraq, Egypt, Saudi Arabia, Cameroon, Mexico, Lebanon, Israel, Jordan, Greece, Yugoslavia, Bangladesh, Afghanistan, Pakistan, Myanmar, Japan, Malaysia, Brazil, Nigeria, Ethiopia, Sudan, Ghana, Benin, Cyprus, and southern USA. Though, virtually it is not grown in Europe and north America, yet lot of people in these countries have started liking this common vegetable because of good amount of vitamin A and folic acid, besides, carbohydrates, phosphorous, magnesium, and potassium. In India, okra is extensively grown throughout the country but the states with substantial acreage under okra are Gujarat, Maharashtra, Andhra Pradesh, Telangana, Uttar Pradesh, Madhya Pradesh, West Bengal, Assam, Rajasthan, Tamil Nadu, Karnataka, Haryana and Punjab, both in rainy and spring-summer season. The global total area and production under okra is reported to be close to 1.15 million ha and 7.9 million tons giving a productivity of 6.8 tons/ha. India with approximately 0.5 million ha (5 lakh ha) area and production and productivity of an average of 6 million tons and 12 tons/ha, respectively accounts for close to 75% of share of world production of okra and hence has been accorded a prominent place in the list of crops under R&D by the private seed companies in India. In India, okra has huge export potential as fresh vegetable to the neighbouring countries in the Middle East, like, Bahrain, Qatar, Kuwait, Saudi Arabia, Muscat, Tehran, and Abu Dhabi and SouthEast Asia, particularly Singapore, Mauritius, Malaysia, Sri Lanka and Bangladesh. Therefore, any company with its own R&D in India treats okra a worthwhile crop to keep it under its portfolio and naturally okra becomes an important crop for commercial breeding. Unless a crop makes business sense on account of substantial acreage, production and seed sale volume, there will be no point in launching a full-fledged commercial breeding programme on that particular crop. Thus, okra qualifies a good candidate for commercial breeding in India.

Temperature is the physical property of an object that quantitatively expresses the hotness or coldness. Most of the weather parameters are dependent on temperature, directly or indirectly. It has important role to play in the development and growth of all living organisms in all stages of their growth. Atmosphere receives the heat energy from the sun and its temperature increases. Due to different amount of heat energy receipt at different places, the air temperatures at different places also vary. The variation in air temperature basically results into air motion, so as to equalize the energy content of the different regions of the earth. Thus, atmospheric temperature is one of the basic elements of weather and climate.

The temperature at a given location and time is affected by energy transfer processes including conduction, convection, advection and radiation. The controls of temperature include those factors that bring about spatial variations in temperature. The important factors that determine the temperature of a particular place on the earth’s surface are latitude, altitude, distribution of land and water, topography, ocean currents, prevailing wind, cloudiness, precipitation, nature of the surface, and turbulence.

An agrometeorological observatory or station is a place where all the necessary instruments and structures are installed and maintained to observe and record the weather parameters at stipulated time interval.

Table 15.1. Instruments used for measuring weather parameters in observatories and laboratories