eChapters

5.1 Population Growth

In 2000, the world had 6.1 billion human inhabitants. This figure may rise to more than 9 billion in the next 50 years. For the last 50 years, world population multiplied more rapidly than ever before, and more rapidly than it will ever grow in the future. Anthropologists believe the human species dates back at least 3 million years. For most of our history, these distant ancestors lived a precarious existence as hunters and gatherers. This way of life kept their total numbers small, probably less than 10 million. However, as agriculture was introduced, communities evolved that could support more people.

World population expanded to about 300 million by A.D. 1 and continued to grow at a moderate rate. But after the start of the Industrial Revolution in the 18th century, living standards rose and widespread famines and epidemics diminished in some regions. Population growth accelerated. The population climbed to about 760 million in 1750 and reached 1 billion around 1800.

In 1800, the vast majority of the world’s population (86 percent) resided in Asia and Europe, with 65 percent in Asia alone. By 1900, Europe’s share of world population had risen to 25 percent, fueled by the population increase that accompanied the Industrial Revolution. Some of this growth spilled over to the Americas, increasing their share of the world total. The 2000 growth rate of 1.4 percent, when applied to the world’s 6.1 billion population, yields an annual increase of about 85 million people. Because of the large and increasing population size, the number of people added to the global population will remain high for several decades, even as growth rates continue to decline.

Between 2000 and 2030, nearly 100 percent of this annual growth will occur in the less developed countries in Africa, Asia, and Latin America, whose population growth rates are much higher than those in more developed countries.

Introduction

Ammonia has been described as one of the most significant limiting factors for the growth and survival of aquatic living resources among water quality criteria (Russo and Thurston, 1991). Ammonia is a common pollutant of water bodies and forms the main nitrogenous waste in fishes (Tomasso et al, 1980). It enters the river and stream directly from livestock wastes and indirectly via poorly treated waste-water discharge. The chemistry of ammonia in freshwater has been extensively reviewed and its toxicity to the fish is generally expressed as ammonia concentration (EIFAC, 1970; WHO, 1986). Ammonia is produced mainly in the fish liver (Goldstein et al, 1982), it reaches the gills through the blood (Evans and More, 1988), excreted through the epithelium (Evans and Cameron, 1986) and finally released into the water body. The accumulation of nitrogen may induce alternations in branchial tissue and causes fish mortality (Peters et al, 1984; Woker and Wuhrmann, 1950).

Ammonia is a weak base, in the acidic range almost all the ammonia gets converted to ammonium ion (NH₄ ⁺) but only a fraction of ammonia forms such ion at alkaline pH. However, in physiological ranges (pH: 7 to 8) about 2.5% of ammonia exists in a unionized form (Paley et al, 1993). The toxicity of ammonia in water is mainly the result of its unionized form (Richardson, 1997). The unionized ammonia accounts for the major part of metabolic ammonia excretion by diffusion down its concentration gradient (Cameron and Heisler, 1983). The unionized ammonia determines the toxicity level in the water and brings about great problems in pisciculture by causing various diseases (Burrows, 1964; Smart, 1976) and alternations in normal physiology (Cairns et al, 1975; Sarkar and Pramanik, 1986). The ratio of unionized ammonia to the total ammonia mainly depends on the pH and temperature of the freshwater. The concentration of unionized ammonia increases with increasing pH and temperature (Emerson et al, 1975). A rise in temperature and pH from 20⁰C to 25°C and 7.5 to 8.5 respectively gives the fifteen-fold increase in the amount of unionized ammonia.

Maturity Standards and Harvesting Indices

Harvesting : Harvesting is detaching a commodity from the point of its origin. This point of origin may be an above ground plant part i.e. shoot eg. apple, tomato etc. or an underground plant part eg potato, carrot, etc. or in water i.e. harvesting of fish from a pond (not to be covered in this book).

The branch of statistics which describes the data is called descriptive statistics. After collection, the data are presented in form of tables, diagrams or graphs. This facilitates the further analysis of data. The most basic form of data analysis is descriptive analysis of data collected and presented for the study. The descriptive statistics summarises the data and helps to find the representative value of the entire data set and the variation of the other values in the data set around the representative value. The descriptive statistics includes the measures of central tendency or averages, measures of dispersion or scatteredness, measures of skewness and the measures of kurtosis. Before going to discuss the R codes for various measures of descriptive analysis, we would first discuss in brief about these measure. This will help in better understanding of the R codes.

Measures of central tendency or averages: They are the representative values of the data series. They give an idea about the concentration of the values in the central part of the distribution of the data. There are five types of averages. They are 1. Arithmetic Mean (A.M.) 2. Geometric mean (G.M.) 3. Harmonic Mean (H.M.) 4. Median 5. Mode.

It has been found that at the household level the health of female members in any family suffers to a large extent. It could be encountered to low health care, poor housing or/and environmental conditions. Due to malnutrition it affects the health to such an extent that it gives rise to many diseases. For a sustainable nutritional status food and various aspects of health needs attention. Looking into that, nutrition is directly related to the health status. For food and nutrition security it is vital to see the availability, accessibility and utilization of food. The World Food Programme (WFP) developed the Vulnerability Analysis and Mapping (VAM) project to analyse the vulnerability to food insecurity of target populations. A prominent part of VAM is related to food access. The demographic and Health Survey (DHS), funded by USAID, provides health data for many countries to help them design their national policy. FAO has developed the Global Information Early Warning System (GIEWS), which collects data related to temporary food insecurity. Under the leadership of WHO, several health surveillance systems have been developed and implemented to monitor the epidemiology of various forms of malnutrition and of selected diseases. At the meso or sub-national level, food market surveys provide data on the availability of food. Agricultural production surveys, intra-household food frequency interviews, immunization surveys and anthropometric surveys of children under five can be used to assess the availability, accessibility and utilization of food and its stability at micro level. Most common Food and Nutrition Security (FNS) indicators at different social and administrative levels depends on the supply and demand. To determine the national situation of food availability data on the production of different food commodities, fertility rate and the trends in internal population needs to be seen. Food prices and per capita food consumption are indicators for national food accessibility. The rates of stunting, wasting and underweight in children, low Body Mass Index (BMI) in adults and low birth weight are FNS impact indicators that designate the extent to which food is adequately being used, utilized and converted into a satisfactory national nutrition situation. Fluctuations and shortages of food availability or accessibility in food prices make the national FNS unstable. Sensitive indicators for accessibility of food are the prices in the market. The sewage disposal and diarrheal diseases (DD) rates affect food utilization.A temporal food and nutrition insecurity arises due to pre and post harvest food availability and accessibility along with low BMI.If the food is in shortage leading to the consumption of more wild foods indicates reduced food availability at household level. Also if the number of meals per day goes down and unemployment increases it indicates low food accessibility.Malnutrition indicators like wasting, goitre or anaemia among the household members show reduced food utilization at micro level. Finally, changes in pre-harvest food consumption practices are good indicators for temporal food insecurity.

Introduction to sustainable disease management

Plants and pathogens are involved in ongoing interactions over millennia that have been modified by coevolutionary processes to limit the spatial extent and temporal duration of disease epidemics (Zhan et al. 2015). These interactions are disrupted by modern agricultural practices, such as intensified monoculture using high yielding varieties. Agricultural intensification and monoculture coupled with globalization disrupt the coevolutionary dynamics of plant-pathogen interactions which escalating the evolutionary rate of pathogens and increasing the risk of plant disease epidemics. These activities, when supplemented with high resource inputs, create unique conditions which is conducive to widespread plant disease epidemics and rapid evolution of pathogen. Disease management requires a significant shift to include ecoevolutionary principles in the design of adaptive disease management strategy for minimizing the evolutionary potential of plant pathogens by reducing their genetic variation, stabilizing their evolutionary dynamics, and preventing dissemination of pathogen variants carrying new infectivity or resistance to pesticides (Zhan et al. 2014). As environmental and ecological issues continue to impact on agriculture, all the crop-specific and regional-specific, Good Agricultural Practices (GAP) to be developed for crop production, must be economically feasible, ecologically sound, environmentally safe and socially acceptable. Numerous non-chemical methods for management of crop diseases such as pathogen-free seeds, disease resistance, crop rotation, plant extracts, organic amendments and biological control agents are considered less harmful than chemical pesticides and therefore, offer great potential for application in modern agriculture (Marshal et al. 2008). No single method can provide satisfactory management of crop diseases. Integration of all the effective and eco-friendly measures in accordance with the dynamics of the agro-ecosystem management would be the best strategy for efficient plant disease management.

Introduction

Fermented meat and fish products have been consumed all over the world since times immemorial and represent one of the most important groups of food. Meat offers its own natural microflora. Hence a wide variety of products have been prepared since ancient times by varying the mixture of meat and salt as well as by the addition of spices and seasonings. Thus, fermented meat products characterize a diversity of flavors and textures and are receiving increased interest from consumers all over the world. Most of these products still depend mainly on local, traditional manufacturing processes since little scientific information is available; but scientific knowledge is very important for consistent production of high quality and safe products.

Meat is an essential part of non-vegetarian diet. It is liked for its unique taste and is a rich source of nutrients like good quality animal proteins, essential amino acids and fatty acids, minerals, trace elements and particularly B-complex vitamins (Singh et al., 2013). The growing concern of consumers regarding health and safety issues has led to the development of functional meat products that promote health and well-being, beyond their nutritional benefits (Grasso, et al., 2014; Tyopponen et al., 2003). This has driven researches in the meat processing sector to increase their efforts in producing such functional meat products, which have incorporated functional ingredients, reduced salt, nitrates/nitrites, cholesterol and fat and modified product fatty acid profiles (Zhang et al., 2010). Fermentation of meat produces a wide range of physical, biochemical and microbial changes in the muscle-based product

ABSTRACT

Approximately 30 % of fruits and vegetables are getting wasted each year in country like India. Not only that, there is a huge loss of agro based commodity during industrial processing and will be considered as industry generated waste. Utilization of such unexplored nutrients from agro processing sectors for making a sustainable food system will be a healthy approach to bring food security and nutrition to all of us. With this aim the present work addresses the utilization of jackfruit seeds, an agro-waste, to value added products. Jackfruit seed flour has a great potential in new food formulation along with wheat flour. The 15% (w/w) blending of jackfruit seed flour with wheat flour could be used in bread and the substituted bread is protein and fibre enriched. This attempt in developing such bakery items with blended flours could address the scarcity problem of non-wheat producing countries. Present study also looks into the alternate source of starch from spice processing industries. The nutrient starch could be explored for isolation from a nonconventional source from turmeric processing sector. The isolated starch could also be modified to enhance some of its functional properties and may be utilized in preparing value added product with a better acceptability and nutrition.Thus, the isolation of nutrients and value-added products out of fruits and vegetables and spice-processing waste would be a stepping stone to an initiative to zero hunger.

ABSTRACT

Green packaging is a technique used to develop sustainable and eco-friendly packaging materials. In this review paper we have examined the data currently available on the use of plant by-products and plant extract in the development of green packaging. The use of plant fibres is especially beneficial because they often contain a high concentration of bioactive compounds. These compounds lend a preservative effect to the packaging material. Further we have also discussed the degradability of such packaging and the additives which need to be added in order to enhance their utility. Lastly, we have examined the possible applications of green packaging in the food industry.

Keywords:GreenPackaging,Plantby-products,Fruitfibres,Biodegradability, Bioactive compounds, Nanocomposites, Renewable resources, Biopolymers

11.1. What is acid soil?

Acid soils refer to those soils that are characterized with the presence of higher concentration of H⁺ in soil solution and at exchangeable sites or characterized with its high proton donating capacity such as aluminium (Al³⁺) on hydrolysis gives rise to proton. Both H⁺ and Al³⁺ are responsible to contribute soil acidity. Al³⁺ causes soil acidity indirectly by generating H⁺ through its hydrolysis, while H⁺ contributes directly. Therefore, due to more abundance of H⁺, they exhibit low soil pH and low base saturation (Ca²⁺, Mg²⁺, Na⁺ and K⁺). Such soil is considered as problematic soil because plant growth is affected adversely under acidic conditions and they suffer root injuries when grown in acid soils. Besides, soil acidity interferes in the soil nutrients availability to plants, making them either deficient to plants (such as phosphorus, calcium, magnesium, molybdenum) or toxic to plants for their more availability. Under acidic condition, Al, Mn and Fe are found in more soluble form. Thus, they are taken up by the plant in such a higher level that they become toxic to plants. Phosphorus becomes immobile due to the formation of insoluble compounds with aluminium and iron under acidic conditions. Ca, Mg and Mo also become unavailable in acid soil and show their deficiency symptoms. Soil acidity also affects soil microbial growth and thus, in turn, affects the nutrient dynamics in soil. Soil acidification is induced heavily under intensive agricultural practices such as increasing leaching due to more irrigation practices, addition of fertilizers, build-up of soil organic matter and many other possible ways.

Introduction

The green revolution is exemplified by too much adoption of high soil disturbance, modern varieties, energy exhaustive technologies, high amount of capital investment and simplification of farming systems (Meeus, 1993), resulting in uniform and featureless landscapes (Nassauer and Westmacott, 1987) in the most intensively farmed arable areas. In post-green revolution epoch, we had experienced a period of remarkable escalation in food productivity, despite rising land values and increasing land scarcity. Farmers from both developing and developed countries get exposed to several production constraints for achieving a sustainable, cost-effective and assured return from their field. Depending upon the circumstances and the scale of farm activities, farmers face varying degrees of climate risk, biotic invasion, and economic uncertainty. Thus, from the context of economical ambiguities, volatile food prices, social pressure to buffer ups and downs of agricultural production and achieving food security for ever growing population and curtailing poverty, farmers must be equipped with novel cultural practices to achieve a sustainable and assured cost-effective grain production. Research experiments throughout the globe found that the principal indicators for unsustainability of agricultural systems are: (1) intensive tillage induced decrement of soil organic matter (OM), structural degradation of soil, accelerated water and wind erosion, reduced water infiltration rates, surface sealing and crusting, soil compaction, (2) insufficient return of organic materials into soil, and (3) monocropping.

2.1. Introduction

There are few studies on the performance and efficiency of Indian commodity derivatives market. Despite a considerable amount of empirical literature, there is no general consensus on whether or not the markets are efficient. As far as the role of futures contract in agricultural commodity is concerned, several studies have been attempted to examine their contribution towards agricultural development of any state and/or country. This chapter presents the review of existing literature on the concerned topic based on interrelationship among the spot and futures market in agricultural sector, role of futures market in discovering spot prices, futures market and commodity price volatility etc.

Quality Components of the Produce

Various components of quality are used to evaluate the products in relation to specific grades and standards and responses to various environmental factors and post-harvest treatments. The relative importance of each factor depends upon the commodity and its intended use, fresh or processed. The main quality components of vegetables are mentioned below

THE DECLINE OF A COLONIAL CAPITAL TOWN

The Post Independence Scenario

It is believed that it takes more time to build and less to demolish, but strangely, in case of Allahabad, it took less time to build but much more to ruin it. As discussed in the last chapter, the peak was reached in about 34 years from 1868 to 1902, the period from 1903 to 1942 being the most constructive years in the history of Allahabad. From the inception of the High Court in 1868 to the formation of the Muir Central College in 1872, to being the capital of the provinces in 1902, Allahabad was regarded as a front runner in the field of Education and Culture.

The city regarded as a ‘production house’, nurtured talent and produced academicians and administrators, who contributed immensely in the process of nation building. The scenario after 1947 however changed drastically, it seemed, as if the city of Allahabad had exhausted its definite role in the freedom struggle, serving only as a preparatory ground which guided young minds to face the future with confidence. Its literary associations, libraries, university and other schools created an intellectual environment which propelled young talents to national fame. The civil services examinations were successfully cleared by many students of the university in those times, this was a result of quality education and an intellectually surcharged environment.

Independent India had lot of promises to fulfill and great expectations from the citizens. Delhi, the capital of Free India, was the focus of these activities. The emergence of new power centers and subsequent development of business and industrial centers, namely, Mumbai, Kolkata, Chennai and later Bangalore, shifted the focus of development from regional, small cities to these new centers. This quantum jump, saw cities of the like Allahabad, Lucknow, Varanasi, trail behind, as they were suddenly reduced in the current perspective and referred to as places in a historical perspective. Post Independence phase created huge opportunity for talented people, academicians, politicians, members of the judiciary, were asked to participate in the running of the nation. Allahabad’s role probably at this point of time, around 1947, seemed to be receding and the city was beginning to be ignored and conveniently forgotten. It slowly became a museum, with only old tales to tell.

This chapter discusses the decline of Allahabad, particularly institutional decline and also traces the earlier efforts in planning of the city. It is here we look for grey areas which would help in finding the exact causes of the physical decline that beset the city.

Pollution

Pollution is an undesirable change in physical, chemical or biological characteristics of air, water or land caused by excessive accumulation of pollutants (substances causing pollution).

Kind of pollution

Pollution can be classified in many ways:

1. INTRODUCTION

The Green Revolution and subsequent efforts through the application of science and technology for increasing food production in India, have brought self-reliance in food. The imputs given by the Government, State Agricultural Universities, State Departments of Agriculture and other organizations through the evolution and introduction of numerous hybrid varieties of fruits and vegetables and improved management practices have resulted in increased food production. However, the nation still faces the problem of the use of improper methods for the storage of food stuffs and their preservation leading to great wastage of the food produced. So, there is a urgent need for the application of food preservation and processing methods.

Food preservation involves all the processes used to maintain foods with the desired properties or nature for longer time. The process is has moved from an art to a highly interdisciplinary science. Food safety now the first priority of the food production and preservation industry, incorporating innovations and sustainability. The preservation and processing of food however, is not as simple or straight forward as it was in the past. A number of new preservation techniques have been developed to satisfy the current demands of economic preservation and consumer satisfaction in nutritional and sensory aspects, convenience, and safety, absence of chemical preservatives, and environmental safety. Understanding the effects of each preservation method on food has therefore, become critical in all the aspects.

1. INTRODUCTION

Thermal processing means preservation by application of heat. It involves heating of foods in hermetically sealed containers for a specific time at a specific temperature to eliminate the microbial pathogens that endanger public health and that micro-organisms that deteriorate food during storage. The credit for invention of thermal processing (Canning) goes to a French Confectioner, Nichola Appert. The application of heat is an important method of preserving foods and is also a means of developing texture, flavour and colour in some foods.

1. INTRODUCTION

In recent years, fruit and vegetable consumption has grown rapidly. Today’s society is characterized by an increasing health consciousness and growing interest in the role of food for maintaining and improving human well-being and consumer health. Due to consumer’s profile being ‘‘rich in cash/poor in time’’, there is a demand for ready-to-eat products As a result of changes in consumer attitudes, the market of minimally processed (MP) fruits and vegetables has grown rapidly. In addition to their nutritional and sensory properties, foods are currently recognized as active and protective agents. Among the others, minimally processed products stand out as convenient novel foods that fit the many needs of a modern lifestyle as they combine technical content with an innovative food concept. Fresh fruits and vegetables are an essential component of a healthy diet, able to decrease the risk of cardiovascular diseases and cancer. Their consumption has continued to grow rapidly, linked to the increased public awareness of their health benefits.

Minimal Processing’ (MP) is a concept describing approaches to food safety and preservation that are designed to retain the natural and as-fresh properties of foods. Minimally processed fruits are new forms of product marketing, intended to meet the consumers’ desires for convenience and fresh-like quality. Minimally processed fruits and vegetables, also called ready-to-use, fresh-cut or pre-cut produce, are raw fruits and vegetables that have been washed, peeled, sliced, chopped or shredded into 100% usable product that is bagged or packaged to offer to the consumers high nutrition, convenience, and flavour while still maintaining its freshness.

1. INTRODUCTION

Admitably except for water and milk, no other beverage has earned such universal acceptance and esteem throughout the ages as wine. The aesthetic postures of wine can be gauged by the quotations like ‘wine is the most healthful and the most hygienic beverage (Louis Pasteur)’, ‘wine is a chemical symphony (Amerine). Man has been preparing and consuming since time immemorial a large variety of alcoholic beverages, ranging from mild stimulants to highly intoxicants liquors. Amongst the mild stimulants are the wines which have long association with human artistic, cultural and religious activities.

Grapes and wines are of immense importance to us and their sheer magnitude of production and associated investment, employment, enjoyment, tax revenue collected and the economic contribution is a justifiable. These play a major role in economics of major wine producing countries like Italy and France. Wine and brandy refer to the fermented by-products of grapes, member of genus Vitis notably the cultivars of V.vinifera L. as per the European definition. However, here these terms may also refer to the fermented by-products from any fleshy fruit or flower. Compared to the grapes, industry producing wine from other fruits is very small. Do these have any role to play especially in nutrition, health and economy of the horticulturally developed countries or are simply mild intoxicants consumed? Such queries at one or the other time may baffle the thinking of an inquisive reader. An attempt has been made here to discuss briefly the historical aspects, role of wine in the context of nutritive and therapeutic value, present status of Indian Wine Industry, research status and future strategies. Emphasis on its role in developing the horticultural industry would also be laid.

1. INTRODUCTION AND IMPORTANCE

Sensory evaluation is one of the important methods of evaluation of the quality of food. Without the sensory evaluation of a product whether it is fresh or processed, it cannot be launched in the market. All the other methods like physical, chemical and microbiological fails for the product development if sensory evaluation is ignored as the final acceptance can come from the sensory evaluation only. So sensory evaluation has got an upper edge as compared to the other methods of food quality evaluation. However, a collective approach of quality evaluation of a product that includes the physical, chemical, microbiological and sensory evaluation is the most acceptable approach today.

In the past, human sensory perception had been the only mean of assessment of product quality as illustrated by the classical examples of cooks who knew how to mask the off-notes long before the microbial assessment of quality came into existence. Everybody relied on the sensory evaluation of food as a criterion of quality assessment. In the past, even the kings depended upon “tasters” to assure that the food was suitable for their consumption in the past. The role of sensory organs in sensory evaluation of food is shown in Table 1. But later on, with the development of instrumentation, sensory analysis was overlooked and the instrumental methods were preferred as they were supposed to provide absolute measures of quality. Consequently, the product quality was traditionally determined by physical, chemical and microbiological criteria with the assumption that the products meeting the prescribed specifications in the above parameters would automatically meet the desired sensory quality. However, soon it was realized that without sensory evaluation, the acceptability of a product cannot be determined.

1. INTRODUCTION

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is ingested by an organism and assimilated by the organism’s cells in an effort to produce energy, maintain life, or stimulate growth. A food contains some non-nutrients, some of which may even have a detrimental influence on the consumers, while some may be inert and have no effect. Nature has endowed many plants with the capacity to synthesize a wide variety of chemical substances that are known to exert a deleterious effect when ingested by animals and are called as antimetabolites. These substances are also referred to as antinutritional factors when they are present in food/feedstuffs and influence a metabolic pathway when introduced into and/or eaten by an organism.

There is a wide distribution of biologically-active constituents throughout the plant kingdom, particularly in plants, used as animal feed stuff and as human food. The knowledge that these compounds elicit both toxic and advantageous biological responses has given rise to several investigations in recent times as to their possible physiological implications in various biological systems. It is well known that plants generally, contain antinutrients acquired from fertilizer and pesticides and several naturally-occurring chemicals. Some of these chemicals are known as ‘‘secondary metabolites’’ and they have been shown to be highly biologically active. They include saponins, tannins, flavonoids, alkaloids, trypsin (protease) inhibitors, oxalates, phytates, haemagluttinins (lectins), cyanogenic glycosides, cardiac glycosides, coumarins and gossypol and the list is inexhaustible. Some of these plant chemicals have been shown to be deleterious to health or evidently dis-advantageous to human and animal health, if consumed in appropriate amounts. Most of these secondary metabolites elicit very harmful biological responses, while others are widely applied in nutrition and as pharmacologically-active agents. The pharmacological and other beneficial effects of these antinutritional factors in plants have been reviewed here.

19.1 Introduction

In self-pollinated crops, the methods of selection aim at improving individual plants. On the other hand, in cross-pollinated crops they aim at improving a population of plants. A population is a large group of interbreeding individuals. Hence, selection is called population improvement in cross-pollinated crops. Selection in self-pollinated crops results in isolation of pure breeding lines which is the end product. But in cross-pollinated crops, it results in an improved population which is used as the commercial cultivar. Improved inbred lines (also called inbreds) for producing hybrids can be obtained from such populations. Again, like many rounds of selection being practised in different inbreeding generations in self-pollinated crops we are also practising many rounds of selection in cross-pollinated crops. But, unlike self-pollinated crops selection in cross-pollinated crops is followed by intermating to develop a new population before starting another round of selection. One cycle of selection consists of selection of individual/family and intermating of the selected units. Such cycle is repeated till we get the improved population. This method of practising the cycles of selection and recombination in a population is called recurrent selection or population improvement. Frey (1983) prefers the use of recurrent selection for closed populations where no new germplasm is added to the population during selection. Population improvement was used for a group of breeding techniques where all aspects are similar to recurrent selection but with the provision of adding new sources of germplasm whenever feasible. It is only a matter of coincidence that past history of application of recurrent selection has been limited to closed populations, but its basic aim has always been the accumulation of favourable genes, without any restriction on the migration of new genes during the course of selection. Apart from a slight nuance, population improvement and recurrent selection are two titles of the same principle and procedure of manipulating the genetic potential of populations. Recurrent selection can also be applied in self-pollinated crops.

Introduction

The health and wellness continue to drive growth in the global food industry as the consumers are constantly looking for the foods, beverages and other dietary solutions that will help them more aggressively to meet their own unique nutrition and personal health goals. Worldwide countries are going through a nutritional transition and are now affected by double burden of problems like nutritional and food security. The common alarming problems are under nutrition and specific nutrient deficiencies simultaneously coupled with imbalanced diets and chronic diseases. The problem of chronic diseases, non-communicable diseases (cardiovascular diseases, respiratory diseases, diabetes, obesity, cancer etc.) and malnutrition is more serious in the developing countries. The lack of access to health services, sufficient income, healthy and nutritious foods characterize majority of poor people in developing countries. So, food is not only the solution but also viewed as a product to enhance health and wellbeing, and it encourages the producers by supplying new goods that meet these needs. From the past decade, there has been growing consumer awareness regarding health, nutrition and the food safety which are often triggered by specific food incidents, especially in the developed countries and high-income groups in such countries. In the food industry there have been two broad trends which are hazards in the food chain and nutritional profile of the food. There has been recognition that hazards and contaminants can enter the food chain and can cause sickness, death and diseases, and so governments, often to deal with consumer and industry concerns, establish regulations and standards on food hazards including standards on pesticides, antibiotics, microbiological hazards and other chemical and physical contaminants. On the other hand, there is also a growing awareness of the health-enhancing properties for prevention and treatment of health concerns beyond the basic nutritional component of many foods.

• Food science deals with the physical, chemical, and biological properties of foods as they relate to stability, cost, quality, processing, safety, nutritive value, wholesomeness, and convenience.
• Food science is a branch of biological science and an interdisciplinary subject involving primarily microbiology, chemistry, biology, and engineering.
• Food chemistry, a major aspect of food science, deals with the composition and properties of food and the chemical changes it undergoes during handling, processing, and storage.
• Food chemistry is intimately related to chemistry, biochemistry, physiological chemistry, botany, zoology, and molecular biology.
• Nonenzymic browning involves reaction of carbonyl compounds, which can arise from existing reducing sugars or from diverse reactions, such as oxidation of ascorbic acid, hydrolysis of starch, or oxidation of lipids.

Some chemical and biochemical reactions that can lead to alteration of food quality or safety

3.1 Introduction

The Mango (Mangifera indica L.) belonging to the family Anacardiaceae in order Sapindales, is amongst the most important tropical fruits of the world. In India, it is also known as the ‘king of fruits’ owing to the delicious quality of the fruit rich in vitamins and minerals. Its long period of domestication is evident from its mention in the ancient Indian scriptures. In India, mango has been valued not only for religious consideration but also for its importance in the economic and cultural life of the society. Mango is rich in Vitamin A and C, flavonoids, carotenes, glucosides, sterols, terpenes, aromatic acids, essential oils, fatty acids and phenolics. It is a powerful nutritive fruit, containing most of the essential substances needed by the human body. The most important single factor limiting the production of mango fruit at the present time is the erratic fruiting habits of this species. Some cultivars produce a good crop in most years and a poor crop in other years, while still other cultivars produce only a few fruits each year. For many years new cultivars have been selected and grown on the basis of size, appearance, and dessert quality with very little attention given to their production capabilities. The improvement of mango needs to explore new recombinants primarily by means of exploiting the breeding methodologies. Diversity or heterogeneity is the main character desired for breeding either natural or manmade. It is required to have vast genetic pool to get new combinations of desired nature and developing new hybrids. It has been mentioned earlier that the development of mango in India is the result of selection from the amateur gardeners. Now, the scientists have developed certain hybrids of mango.

The extension professionals are interested to disseminate technology to the users. The users are rural people. The users of technology are to read and understand technology designed for them. Rural readers have different interests like, crop production, animal husbandry, fisheries, forestry etc.

1 Which of the following diseases is also known as Equine Distemper?

a) Eastern Equine Encephalomyelitis

b) Western Equine Encephalomyelitis

c) Strangles

d) Glanders

Natural resources are the resources present naturally in the environment. These resources are used by human being for their survival. Minerals, building stones, forests, and various energy resources are known as natural resources. Natural resources have been extracted and utilized since ancient times but as the population increased, the demand of natural resources are increasing day by day.

Integrating the function f (x) = 1 + e−x sin (4x) over the interval [0, 1]

using Simpson’s 1/3rd rule gives

(A) 1.021         (B) 0.091

(C) 1.321         (D) 2.642

Introduction

The concept of feeding system of different aquatic components of the aquaculture is not simple like that of domestic animals where feed, feeding and the animals can be observed closely and manipulated at once. In case of aquaculture both biotic and abiotic factors play an important role in feeding as well as the growth of the animal. Factors like water temperature, dissolved oxygen, light intensity, etc. regulate the intake of feeding, its digestion and assimilation. Conditioning factor, feed conversion rate, survival rate, percent weight gain, daily weight gain, specific growth rate are some of the parameters used routinely to monitor the effects of feeding on growth performance of the fish.

In aquaculture, supplementary feed is provided in conjunction with the available natural food such as plankton, periphyton, benthic organisms, aquatic plants etc. Aquaculture is a feed-based industry, with artificial feed accounting for major expenditure exceeding 60% of total operational cost. In India, freshwater aquaculture is mainly carp-based, which accounts for about 89% of total aquaculture production (Ayyappan and Jena, 1998). Successful and sustainable aquaculture depends upon the provision of nutritionally adequate, eco-friendly and economically viable artificial feeds. Effective utilization of feed depends upon many factors such as acceptability of the feed, its digestion, assimilation etc. apart from other rearing management protocols.

16.1 OOP in python

Object-oriented programming (OOP) is a programming language model which organized object and data.

16.1.1 What is Encapsulation

If same variable is reapet in two different palce then which problem is solved using encapsulation it means one variable is making private otherwise program generate error.

16.1.2 Abstraction

Abstraction in Python is the process of hiding the real implementation of an application from the user and emphasizing only on usage of it. For example, consider you have bought a new electronic gadget. Along with the gadget, you get a user guide, instructing how to use the application, but this user guide has no info regarding the internal working of the gadget.

Another example is, when you use TV remote, you do not know how pressing a key in the remote changes the channel internally on the TV. You just know that pressing + volume key will increase the volume.

Q.1 Factorial experiment is not a design.

Q.2 In factorial experiment, all possible combinations of two or more than two factors are not considered

The concept of indigenous knowledge or indigenous knowledge system (IKS) delineates a cognitive structure in which theories and perceptions of nature and culture are conceptualized. Thus, it includes definitions, classifications and concepts of the physical, natural, social land economic environments. The dynamics of IKS takes places on two different levels, the cognitive and empirical. On the empirical levels, IKS is visible in institutions, artifacts and technologies.

In whole of the world, about 6 to 7 m ha of agricultural land is becoming unproductive every year due to one or the other reasons (Gupta, 2018a). This is, however, more so in case of developing countries (Gupta, 2003). Productive lands are utmost important to meet the countryís growing needs for food, fodder, fuel wood, medicinal herbs and timber.

Conservation agriculture is an approach to managing agroecosystems for improved and sustained productivity, increased profits and food security while preserving and enhancing the resource base and the environment. Food and Agriculture Organisation of the United Nations (FAO) defines conservation agriculture as a farming system that promotes maintenance of a permanent soil cover, minimum soil disturbance (i.e., no tillage), and diversification of plant species.

Water is a critical input for agricultural production and plays an important role in sustainable agriculture and food security. Agriculture is the principal user of water, accounting for around 70% of total withdrawals. Producing each calorie of food requires approximately one litre of water.

Organic farming is one of the several approaches found to meet the objectives of sustainable agriculture. It is often associated and sometimes confused with
‘sustainable farming’. However, policy and ethics-wise ‘organic farming’ is different from ‘sustainable farming’. Organic farming is based on various laws
and certification programmes whereas sustainable agriculture is the practice of farming using principles of ecology.

A ‘system’ is a set of interrelated, interacting and interdependent elements operating together for a common purpose and capable of reacting as a whole to external forces. It is unaffected directly by its own output and it has a specified external boundary based on the inclusion of all significant feedbacks. A ‘farm’ is a system because several activities are closely related to each other by the common use of the farm labour, land and capital, by risk distribution and by the joint use of the farmer’s management capacity.

The Green Revolution started in the early 1960s that led to the attainment of self-sufficiency in food grain production. This has been considered as the greatest agricultural transformation in the history of humankind. The Green Revolution contributed to widespread poverty reduction, averted hunger for millions of people, and avoided the conversion of thousands of hectares of land into agricultural cultivation.

Over the period of time, the dairy sector has added distinct significance to growing Indian economy. India contributes nearly 19.54% to the global annual milk production with an impressive upliftment of 3.6% in yearly production rate as per the latest available data from FAO International.

Mass spectrometry (MS) is a powerful and versatile analytical technique through which mass of an atom, or a molecule is assessed. It helps for identification and structure elucidation of various complex compounds. The instrument used is known as Mass Spectrometer. It serves the purpose of qualitative identification, confirmation as well as the quantification of an atom or a molecule. MS identification is conclusive because the mass spectrum of each substance is unique. In general, MS instruments are composed of a sample inlet, an ionization source, a molecule accelerator, a detector, an amplifier, and a recorder (Figure 7.1)

Millets, represents groups of small seeded cereals and grasses cultivated in Asian countries from ancient time and used for domestic purpose as feed and food. Being capable to grow under adverse environmental conditions (high temperature, dry land with limited rain) millets are the main food commodity of low income groups in various developing countries around the world.

The word mulch was coined by Wagganor in 1960. It is derived from the German word ‘molsch’ means “easy to decay,” and mulches have widely been used for vegetable production since ancient times (Lightfoot 1994). Therefore the term mulching refers to the practice of covering the soil surface with different organic and inorganic materials, known as mulch materials to reduce moisture loss, balance wide variations in diurnal soil temperatures especially in the root zone, control weeds, insect-pests and diseases and finally enhance crop yield (Nalayini 2007; Kader et al. 2019).

The metabolic rate of reptiles is lower than for mammals and birds, and consequently the k constant in determining energy expenditure, nutritional requirements and even calculating allometric drug doses are related to the equation: Basal Metabolic Rate (BMR) = K(Wkg0.75) = Kcal/day, where K is the energy constant = 10 in reptiles and Wkg is the animalís weight in kilograms.

History of food safety starts with knowledge about food hazards. The term “safe food” can be defined from different angles since the end users are highly heterogeneous. However, the accumulating data and day by day emerging information aboutfood borne diseaseslead to a boom in public awareness about food safety. Food safety can be defined as “The strategies and activities aimed to protect foods from biological, chemical, physical, and allergenic hazards that may occur during all stages of production, distribution, and consumption” (Paperella, 2020). According to the World Health Organization (WHO), unsafe food,which contains hazardousmicroorganisms or chemicals, causesmore than 200 ailments, ranging from diarrhoea to malignancies among which diarrhoea is common. 

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

Climate-smart Agriculture Practices and Indicators

Considering the three pillars of climate-smart agriculture such as productivity, adaptation and mitigation, different technologies and practices have been evolved.

The CSA practices are grouped under soil and land management, water management, crop management, livestock management, forestry, fishery & aquaculture and energy management. The World Bank Group (2016) has suggested broad indicators of CSA practices (Table 7.1; Chapter 7)