eChapters

What is Plant Disease Resistance and Its Mechanisms

There are two main types of plant disease resistance:

Innate Resistance (Non-Host Resistance): This is a broad-spectrum resistance that prevents most potential pathogens from infecting the plant. It is often due to the lack of essential factors required for the pathogen’s survival or the presence of preformed physical and chemical barriers.Plant disease resistance is the ability of a plant to prevent or reduce the damage caused by pathogens (disease-causing organisms) like fungi, bacteria, viruses, and nematodes. It involves a complex interplay between the plant’s defense mechanisms and the pathogen’s virulence factors.

In the realm of natural elements, there exist approximately one hundred and three distinct elements. Among them, nearly ninety elements are absorbed by plants. To differentiate essential elements from those that plants can assimilate but are not vital, Arnon (1954) established the following criteria:

1. The plant must be incapable of normal growth or completing its life cycle in the absence of the element

2. The element is specific and irreplaceable by another

3. The element directly participates in plant metabolism

By applying these criteria, molybdenum and chlorine are not deemed essential, even though they serve a functional role in plant metabolism. This is because they can be substituted by vanadium and halides, respectively. Subsequently, D. J. Nicholas refined the definition of essential elements, replacing the term “functional or metabolic nutrient” to encompass any mineral element that contributes to plant metabolism, regardless of whether its action is specific.

The growth and productivity of crops depend on various factors, with the nutrient content of plant parts like leaves and stems playing a crucial role. These parts are often used as indicators to assess the nutrient status of plants. Each crop requires essential elements at specific concentrations during different growth stages, known as ‘critical levels’. When the nutrient content falls below these critical levels, plants may display symptoms of deficiency.

Nutrient requirements and availability can be evaluated through: i) plant diagnosis, ii) soil analysis, and iii) plant analysis using qualitative or quantitative methods. By conducting these tests, necessary nutrients can be identified and applied to crops to sustain growth and correct deficiencies. While rapid tissue tests offer quick solutions for nutritional problems, quantitative estimation of both plant and soil nutrient concentrations is more economical and provides a long-term strategy for managing nutritional issues. Implementing quantitative estimation allows for informed application of fertilizers, whether as basal or foliar, thus addressing deficiencies effectively and ensuring sustainable crop growth.

Sample Digestion

Dry ashing and wet oxidation are the two widely adopted methods for the release of mineral elements from plant tissues. Dry ashing is carried out usually at an ignition of 550 to 600 °C leads to loss of P and K by volatilization. Dry ashing being comparatively more time taking and also has a few drawbacks (such as S and Cl is lost by volatilization during ignition which can be prevented by adding Na2 CO3 ; a part of P and micronutrients also get occluded) is hence occasionally adopted. On the other hand, wet oxidation employs oxidizing acids like HNO3-HClO4 di-acid or HNO3-H2 SO4-HClO4 tri-acid mixture. The volatilization loss of K is prevented by the use of HClO4 and provides a clear solution while H2 SO4 helps completing oxidation. On heating HClO4 dissociates into nascent chlorine and oxygen, increasing the oxidation efficiency at high temperature. Explosion and fire may occur if there is direct contact of HClO4 with plant sample; hence the pre-digestion of samples is preferred. Digestion with HNO3-HClO4 instead of tri-acid mixture is also adopted specially when S is also to be determined in the same digest. The wet oxidation method being less time-consuming, easier and convenient is given below:

Objective

To determine the electrical conductivity (EC) of soil, which is an indicator of the soil’s salinity and its ability to conduct electricity. This provides valuable information about the nutrient availability and potential toxicity to plants.

Materials Required

• Soil sample

• Distilled water

• Electrical conductivity meter (EC meter)

• Beakers (100 mL)

• Measuring cylinder (50 mL)

• Stirring rod

• Filter paper and funnel

• Mortar and pestle (for soil grinding, if necessary)

Objective

To determine the pH of a soil sample, which provides insight into the soil’s acidity or alkalinity, influencing nutrient availability, microbial activity, and plant growth.

Materials Required

• Soil sample

• Distilled water

• pH meter or pH paper

• Beakers (100 mL)

• Measuring cylinder (50 mL)

• Stirring rod

• Filter paper and funnel (if needed) • Mortar and pestle (for soil grinding, if necessary)

The Walkley-Black method is a widely used chemical procedure to estimate soil organic carbon (SOC). It involves the oxidation of organic carbon by potassium dichromate in the presence of sulfuric acid, followed by titration to determine the amount of unreacted dichromate. Here is a detailed step-by-step guide:

Materials Required

• Soil sample (air-dried and sieved through a 2 mm sieve)

• Potassium dichromate solution (1 N)

• Concentrated sulfuric acid (H2 SO4 )

• Ferrous ammonium sulfate solution (0.5 N)

• Orthophosphoric acid (H3 PO4 ) (optional)

• Diphenylamine indicator or N-phenylanthranilic acid (indicator)

• Distilled water

• Burette, pipette, and conical flasks

• Heating mantle or hot plate

Chlorophyll content serves as a vital indicator of plant health and photosynthetic efficiency, with higher levels reflecting robust photosynthesis and overall plant vigor, while lower levels may signal nutrient deficiencies, diseases, or environmental stresses. Assessing chlorophyll content helps evaluate plant productivity, as chlorophyll is essential for absorbing light and converting solar energy into chemical energy. Additionally, the chlorophyll-a to chlorophyll-b ratio provides insights into how plants adapt to various light conditions, revealing their light absorption efficiency and ability to cope with environmental changes. Measuring chlorophyll on a fresh weight, dry weight, and leaf area basis allows researchers and agronomists to gauge the effectiveness of agricultural practices such as fertilization, irrigation, and crop management strategies. It also aids in monitoring the impact of stress factors like drought, salinity, pollution, or pest attacks, which is crucial for developing strategies to enhance crop resilience.

Reagents: 80% acetone: - 80 ml acetone + 20 ml water = 100 ml

Procedure for Chlorophyll Extraction from Leaves

1. Sample Collection: Collect fresh, healthy leaves from the plant to be analyzed. Ensure that the leaves are free from dust, pests, and diseases.

2. Preparation of Leaf Samples: Rinse the leaves thoroughly with distilled water to remove any surface contaminants. Pat them dry with a clean paper towel. Weigh an exact amount (usually around 0.1-0.5 grams) of fresh leaf tissue using an analytical balance. Record the fresh weight accurately.

Introduction

Carotenoids are pigments found in plants that contribute to photosynthesis and provide various health benefits. Measuring carotenoid content in leaves can help assess plant health, productivity, and the effects of environmental conditions. The determination of carotenoids typically involves extraction followed by spectrophotometric analysis.

Materials and Equipments

• Fresh leaf samples

• Acetone, hexane, or a mixture of acetone and hexane (for extraction)

• Mortar and pestle or homogenizer

• Centrifuge and centrifuge tubes

• Spectrophotometer • Volumetric flasks and pipettes • Analytical balance

Leaf Relative Water Content (RWC) is a key indicator of plant water status and is used to assess water stress, physiological health, and the efficiency of water use in plants. It reflects the amount of water in the leaf relative to its maximum water capacity and is a useful measure in plant physiology and stress studies.

Materials and Equipment

• Fresh leaf samples

• Analytical balance

• Oven or drying equipment

• Desiccator

• Caliper or ruler

• Distilled water

• Petri dishes or similar containers

• Weighing boats or paper

Analytical Reagents

Chemical reagents are supplied in different grades and each grade has a distinct purpose and range of uses. The purest grade is analytical reagent (AR), the second is laboratory reagent (LR), the third is guaranteed reagent (GR) and fourth is technical grade. Second and third form of reagents have a lot of impurities. Therefore, for the determination of micronutrients, AR grade reagents should be used.

Distilled Water

Distilled water is always used in chemical analysis. The quality of distilled water varies from single distilled water to double or triple distilled water depending upon the requirement of analytical technique(s) e.g. double distilled water (glass distilled) is always recommended for micro nutrient and heavy metal analysis.

Volumetric Analysis Precautions

1. Use Clean Glassware: Ensure all glassware, such as burettes, pipettes, and volumetric flasks, is thoroughly cleaned and rinsed with distilled water to avoid contamination and ensure accurate measurements.

2. Clean Glassware Properly: Before use, all glass apparatus should be thoroughly cleaned with a cleansing mixture of potassium dichromate (K2 Cr2 O7 ) and concentrated sulfuric acid (H2 SO4 ) to remove any residual contaminants. After cleaning, rinse the glassware thoroughly with distilled water to ensure no traces of the cleansing mixture remain.

3. Proper Calibration: Calibrate all measuring instruments, including burettes, pipettes, and balances, before use to maintain accuracy in measurements.

4. Avoid Parallax Error: When reading the meniscus level in a burette or volumetric flask, ensure the eye is at the same level as the meniscus to prevent parallax error.

5. Use Correct Indicators: Choose the appropriate indicator for the titration based on the type of reaction and the pH range of the endpoint to ensure precise determination of the endpoint.

It sounds like you're interested in agro-animal-based yarns, natural dyes, and weaves. These are fascinating topics that blend traditional craftsmanship with sustainable practices. Here are some insights and examples:

1. Agro-animal-based Yarns

a. Wool: Wool is one of the most common agro-animal-based yarns, sourced from sheep. It's known for its warmth, durability, and natural elasticity.

b. Silk: Silk is produced from silkworms, particularly the mulberry silkworm. It's valued for its smooth texture and luxurious appearance.

c. Mohair and Cashmere: These fibers come from goats (Angora and Cashmere goats, respectively). Mohair is known for its luster and durability, while cashmere is prized for its softness and warmth.

2. Natural Dyes

a. Indigo: Derived from the indigo plant, it produces shades of blue and is one of the oldest natural dyes used globally.

Housing of Poultry

Proper housing is essential for successful poultry farming, as it directly impacts the health, welfare, and productivity of the birds. Well-designed poultry housing not only provides protection and comfort but also ensures efficient management and optimal environmental conditions for the flock. This chapter explores the key aspects of poultry housing, including its purpose, site selection, and layout considerations.

Purpose of Poultry Housing

• Protection and Comfort: Provides a safe environment that shields birds from predators, harsh weather, and other external threats.

• Health and Welfare: Ensures optimal health and well-being by preventing diseases and reducing stress.

• Management: Facilitates easy and efficient management of the flock in a controlled and scientific manner.

• Cost Efficiency: Reduces overall production costs through efficient resource management.

Poultry is one of the fastest-growing industries within agriculture and allied sectors worldwide. This rapid expansion results in the generation of substantial amounts of waste, including poultry manure, dead birds, hatchery wastes, and abattoir wastes. Proper treatment and scientific disposal of these wastes are crucial to avoid significant threats to both avian health and human safety. Unmanaged poultry wastes can lead to the spread of diseases among birds, resulting in considerable economic losses due to mortality and decreased productivity. Additionally, improper waste disposal can contribute to soil and groundwater pollution. Globally, an estimated 400 million chickens are processed weekly, generating a vast amount of waste. For instance, a broiler produces about 0.09 kg of manure daily, while a laying hen produces around 0.18 kg. Effective management of poultry waste requires a comprehensive understanding of its composition and the various physical, chemical, and microbiological processes that influence the fate of potential pollutants, particularly when the waste is applied to land.

Ber, Ziziphus mauritiana is indigenous to India and was called as poor man’s fruit earlier. But now it has become a good source of income to the orchardists, in the arid and semi-arid regions of the country, mainly with the development of new varieties. A number of insect pests (around 150) infest the ber tree but only few are the major ones, the description of which is provided below:

Fruit fly, Carpomya vesuviana Costa (Tephritidae: Diptera)

It is a major pest of ber in all the ber growing regions and proves as a bottleneck in its production and productivity. It is monophagous and develops only in fruits of Ziziphus spp. Most of the cultivated varieties are susceptible to this direct pest. The eggs are small, elongate, spindle shaped and creamy white. Maggots are creamy white (Plate 9a) and slightly smaller than maggots of other fruit flies. Pupae are barrel shaped and brown. Adults are smaller than housefly, brownish yellow with brown longitudinal stripes on the thorax. This fruit fly can be distinguished easily from other species due to distinctive pattern of black marks on the scutum and scutellum (Plate 9a). Wings are hyaline with four yellow cross bands.

Pomegranate, Punica granatum is a non-climacteric fruit belonging to smallest Botanical family Punicaceae. In India, Maharashtra is a leading producer of pomegranate followed by Gujarat. Around 90 pests are reported to feed on pomegranate plant out of which only few are of economic concern. The major insect pests and mites are discussed herewith:

Anar butterfly, Deudorix epijarbas (Moore); D. isocrates (Fabricius); (Lycaenidae: Lepidoptera)

Pomegranate fruit borer, commonly known as anar butterfly is a polyphagous direct pest found throughout the country. In addition to pomegranate, it also feeds on number of crops viz. litchi, citrus, loquat, guava, sapota, aonla etc. Even the wild pomegranate is heavily infested by the fruit borer. Two species namely Deudorix epijarbas and D. isocrates are reported feeding on pomegranate out of which the former is found in hilly terrain of Northern India whereas, the latter exists in the plains of the country. The eggs are glossy, light green and shiny. The larva is dark brown with short hairs and bears whitish patches all over the body (Plate 9d). The full fed larva measures 17-20mm. The adult of D. epijarbas is a brownish butterfly with an orange patch in the

Banana, Musa paradisiaca is one of the most important tropical fruit crops. India tops in the production of banana in the world and almost throughout the year banana fruit is available form one or another part of our country. Maharashtra, Tamil Nadu and Karnataka are the major states in cultivating and producing banana in India. The major insect pests associated with banana crop are described hereunder:

Banana weevil, Cosmopolites sordidus (Germar) (Curculionidae: Coleoptera)

It is most destructive and specific pest of banana and is distributed throughout the country. The eggs are elongate, oval (about 2 mm long), pearly white and present on upper surface and crevices of rhizome. The grubs are creamy white, stout, fleshy swollen in the middle and has red head capsule (Plate 10a). The full grown grub measures 15 mm in length. Pupae are white and found in the pupal chamber made in the periphery of rhizome. The newly emerged weevil is shiny reddish brown but soon becomes uniformly black (12.5mm in length). Longitudinal striations are found in the elytra and it does

Sapota, Manilkara zapota commonly called Chickoo is a popular tropical winter fruit cultivated widely in Gujarat, West Bengal, Telangana, Andhra Pradesh, Maharashtra and Tamil Nadu. In north, its cultivation is seen across Jammu to Dehradun. Very few insect pests infest Sapota, the details of which are given hereunder:

Sapota leaf webber, Nephopteryx eugraphella Ragonot (Pyralidae: Lepidoptera)

This is a pest of major concern in Chickoo cultivation in India. The eggs are oval and pale yellow in colour which change to reddish brown near hatching. The caterpillar is pinkish in appearance and bears two longitudinal dorsolateral lines. The full fed larva measures 25 mm in length. The newly formed light green pupa changes to reddish brown in the later stage. The adult is a greyish moth having hooked antennae (Plate 10e) bears two vertical lines on the forewing whereas, the hind wings

The cultivation of pineapple, Ananas comosus is prevalent in Kerala, Andhra Pradesh, Bihar and North eastern parts of the country. It is one of the choicest fruits all over the world because of its pleasant taste and flavour. Pineapple is a good source of vitamin A and B and fairly rich in vitamin C and minerals like calcium, magnesium, potassium and iron. It is also a source of bromelin, a digestive enzyme. In addition to being eaten fresh, the fruit can also be canned and processed in to different forms. The description of some of the major pests infesting pineapple are given hereunder:

Mealy bug, Dysmicoccus brevipes (Cockerell) (Pseudococcidae: Hemiptera)

It is a polyphagous pest and besides pineapple it infests banana, sugarcane, citrus, coffee and long pepper. These are small, oval and soft bodied sucking insects. The eggs are pink in colour but remain inside the female body. The first stage nymphs are called crawlers which moves to find a suitable spot for sucking of cell sap, thereafter they settle at a particular place. The adult is elliptical and bears 17 pairs of wax filaments (Plate 10h). The colour of the pest is pink but looks white due to white waxy covering. The mealy bug first infests root and later they are found

Grape, Vitis vinifera are cultivated mainly in the sub-tropical and tropical regions, however, it can also be grown in the temperate regions. Telangana, Andhra Pradesh, Karnataka, Maharashtra, Tamil Nadu are the main grape growing states. In India, the grapevine cultivation is mainly for producing fruits for the table purpose. Around 80 insect pests and mites cause damage in the grape vine yards directly or indirectly, of which few are of major importance. The damage can be checked if the details of the major pest problems are known in advance. The details about major insect pests and mites are given hereunder:

Thrips, Rhipiphorothrips cruentatus Hood (Thripidae: Thysanoptera)

It is a polyphagous pest feeding on number of hosts like rose, jamun, guava etc. but grapevine is the most preferred host. This pest is prevalent in all grapevine growing regions of the country. The eggs are bean shaped and dirty white. The nymphs are yellowish brown with reddish brown abdomen. The pupa is brownish and have irritative movements on

Papaya, Carica papaya is a fruit mainly grown in tropical and sub-tropical regions. India is top most producer of papaya in the world and accounts for around 45 per cent of the total papaya production in the world. In India, the main cultivation of papaya is in the states of Telangana, Andhra Pradesh, Orissa, West Bengal, Kerala, Karnataka, Madhya Pradesh, Tamil Nadu and Gujarat. In north, due to frost problem, the cultivation is fruitful only in frost free areas as this fruit crop is highly frost sensitive. Few insect pests are of major concern in the cultivation of papaya, the description of which is given hereunder:

Papaya mealy bug, Paracoccus marginatus Williams & Granara de Willink (Pseudococcidae: Hemiptera)

It is an invasive pest believed to be a native of Mexico or Central America. In India, it was first reported in Tamil Nadu during July 2008 infesting papaya and later it spread to number of fruit, vegetables and ornamental crops in many states. The eggs are grain like and greenish yellow. The nymphs as well as adult is yellow but appears white due to waxy coating over its body

Aonla or Indian gooseberry, Emblica officinalis is indigenous to Indian sub-continent. India ranks first in the world in area and production of this crop. Aonla is mainly cultivated in the states of Uttar Pradesh, Maharashtra, Gujarat, Rajasthan, Andhra Pradesh, Karnataka, Tamil Nadu, Himachal Pradesh etc. It performs well even in the wastelands. Aonla is a plant of great medicinal value and its fruits are a rich source of vitamin C. It has acrid, cooling, diuretic and laxative properties. Dried fruits are useful in hemorrhages, diarrhoea, dysentery, anaemia, jaundice, dyspepsia and cough. Aonla is used in the indigenous medicines (Aurvedic system) viz. trifla and chayvanprash. Fruits are commonly used for preserve (murabbas), pickles, candy, jelly and jam. Besides fruits, leaves, bark and even seeds are being used for various purposes. Very few insect pests are reported on aonla and the details of which are provided here under:

Mealy bug, Planococcus citri Risso (Pseudococcidae: Hemiptera)

It is a highly polyphagous pest feeding on wide range of cultivated/ uncultivated plants. Citrus, mango, guava are few major hosts besides aonla. The bug is a small soft bodied insect the female of which is wingless

Fig, Ficus carica grows in both mild temperate climates and in the tropics. In India, it is a minor fruit crop and the commercial cultivation is mainly confined to Maharashtra, Gujarat, Uttar Pradesh, and Tamil Nadu though is slowly spreading to warmer areas of Northern parts of the country. Very few insect pests come under the major category, the description of which is provided below:

Stem borer, Batocera rufomaculata (Cerambycidae: Coleoptera)

It is commonly known as mango and fig borer. The adults of this pest bear long serrated antennae and are also called as longicorn beetles. The adults get attracted to light. The female cuts the tree bark and lays eggs singly into these cuts, laying a total of up to 200 eggs. On hatching the larvae start to tunnel into the sapwood of the trunk or branches. The larvae pupate inside the tunnel and the adult comes out of pupae by cutting a circular hole. Frass comes out

India is the largest producer and consumer of areca nut, Areca catechu also known as betel nut or supari, in the world. It also holds significant cultural and religious importance. Major cultivation is done in Karnataka, Kerala, Assam, Tamil Nadu, Meghalaya and West Bengal. Spindle bug and inflorescence caterpilar are the major pests alongwith root grub, the details of which are provided hereunder:

Spindle bug, Mircarvalhoia arecae (Miller and China) (Miridae: Hemiptera)

It is a major indirect pest of arecanut plantations in all arecanut growing tracts. Eggs are oval having 2 bristle like structures arising from operculum. The nymphs are greenish to violet brown, thorax and border of the abdomen light violet brown and head is light yellow with red eyes. The adult is a hairy dark violet brown bug with black tipped abdomen (Plate 12h) and measures 6mm in length and 2mm in breadth.

Tea, Camellia sinensis is one of the most important beverage crops. India is the second largest producer of tea globally. North eastern parts contribute to 80 per cent of the total tea production in the country with majority coming from Assam and West Bengal. Southern parts contribute around 20 per cent with Tamil Nadu, Kerala and Karnataka being the major tea producing states. About 150 insect pests are reported on tea out of which foliage feeders like Tea mosquito bug, bunch caterpillar and mites act as direct pests. The details of major insect pests are being given hereunder:

Tea mosquito bug, Helopeltis antonii Signoret and H. theivora Waterhouse (Miridae: Hemiptera)

This is one of the major pests of tea in India and besides tea it also infests cashew, neem, drumstick and guava. The eggs are sausage shaped and bear two minute hairs on operculum, which project out of the egg. Nymphs of H. antonii are reddish and ant-like, while those of H. theivora are dirty yellow or greenish yellow. The adult of H. antonii is a reddish-brown bug with black head, red thorax and black and white abdomen, whereas, the adult of H. theivora is a small, active elongated bug with black or olive green head

India produces two types of coffee i.e. arabica, Coffea arabica and robusta, C. canephora. The former has higher market value than the latter. Coffee is cultivated mainly in the Southern parts of India with Karnataka, Kerala and Tamil Nadu being the major coffee producing states. Some of the major pests which limits the cultivation of coffee are described below:

White stem borer, Xylotrechus quadripes Cheverolat (Cerambycidae: Coleoptera)

It is a serious pest of Arabica coffee in India. Alternate host plants include Robusta coffee, teak and Indian olive tree. Eggs are milky white when freshly laid but turns yellow later on. These are elongate, oval in shape and measures 1.25 –1.28 mm in length and 0.46 – 0.5 mm in width. The adult is a dark brown longicorn beetle (16mm long) and bears several white markings on the elytra (Plate 14c). The pale yellow stout full grown grub broader towards the anterior most region, measures 20-30 mm in length.

Cocoa, Theobroma cacao is an important commercial plantation crop of humid tropics. It was introduced as a mixed crop in India and is cultivated in coconut and arecanut plantations large scale from 1970 onwards. It is grown as an under- storey intercrop with sufficient shade in southern states of India. Tamil Nadu is the major cocoa producing state in India. Some pests of economic importance are described hereunder:

Mealy bugs, Planococcus lilacinus (Ckll.) and P. citri (Pseudococcidae: Hemiptera)

These two species are most prevalent in all cocoa growing tracts of the country. Beside cocoa, it also infests coffee, citrus, guava, mango, etc. The adult female is an oval wingless insect which measures 4mm in length. The body colour is chocolate brown and the dorsal body surface is covered with thick waxy covering (Plate 14g). The male is winged and free living.

Kachauri: A type of pitta bread made into a pocket and stuffed with a spiced bean mixture.
Kalakand: Sweetened dairy product that is popular in India. It is made by evaporating acidified buffalo milk.
Kanji: Traditional Indian beverage made from black carrots. Peculiar to the northern plains of India, black carrots are black on the outside but a rich red colour under the skin. The carrots are parboiled in water with salt and other flavourings such as ground mustard seeds and chilli powder. The mixture is then left to ferment in the sun, resulting in a sour and spiced red drink which is consumed as an accompaniment to meals.
Kava: Beverage made by aqueous extraction of powders prepared from rhizomes of kava kava (Piper methysticum). It is used in the south Pacific region as a narcotic/stimulant. It is also used in treatment of anxiety and a range of disorders. The pharmacologically active components are lactones. Non-addictive, but can have adverse effects, such as muscle weakness, drying of the skin, and liver damage, if consumed over a long period of time or in high amounts. Kawal: Strong-smelling pastes prepared by fermentation of leaves of the legume Cassia obtusifolia. It is rich in protein. It is used as meat substitutes in soups and stews.
KCl: It is chemical formula for potassium chloride. One of the chlorides widely used in food processing at varying levels to replace salt (NaCl), for example in brines, in order to reduce Na levels in foods, and specifically to produce low sodium foods and salt substitutes.

1. Vein-Clearing/Yellow Vein Mosaic
Bhendi yellow vein mosaic virus
Diagnostic Symptoms
• Yellowing of the entire network of veins in the leaf blade is the characteristic symptom.
• In severe infections, the younger leaves turn yellow, become reduced in size and the plant is highly stunted.
• The veins of the leaves will be cleared by the virus and intervenal area becomes completely yellow or white.
• In a field, most of the plants may be diseased and the infection may start at any stage of plant growth.
• Infection restricts flowering and fruits, if formed, may be smaller and harder.
• The affected plants produce fruits with yellow or white colour and they are not fit for marketing (Fig.1).
• The virus is spread by whitefly.

Scientific name: Atropa belladonna L.
Family: Solanaceae
Belladonna, also known as deadly nightshade, is a legendary Central European nightshade with a rich history. The plant contains hallucinogenic alkaloids, primarily atropine, which is named after the plant.
Origin and distribution
Atropa belladonna is native to temperate southern, Central, and Eastern Europe, as well as North Africa, Turkey, Iran, and the Caucasus. It has been naturalized in some areas of North America and is considered a weed species in regions with disturbed soils.
Botany
Belladonna, is a plant species characterized by its distinctive features. It grows to a height of approximately 1.5 meters, with a purplish-colored stem. The root system is thick, fleshy, whitish, and branched. The plant's leaves are simple, dark greenish in color, ovate, and alternate in nature. The flowers are solitary and bell-shaped, blooming from June to September. The plant produces berries that are highly toxic, and the seeds contain toxic alkaloids.

Scientific name: Abelmoschus moschatus Medik.
Family: Malvaceae
Abelmoschus moschatusMedik., commonly known as ambrette, annual hibiscus, or musk mallow, is a tropical plant species belonging to the Malvaceae family. Native to India, Southeast Asia, and Africa, this herbaceous plant has been cultivated for centuries for its medicinal, culinary, and fragrant properties. It is an annual or biennial plant that grows up to 2 meters in height, with hairy, palmate leaves and showy, yellow flowers with a purple center. The plant's seeds, leaves, and flowers emit a strong, musky fragrance used in perfumery and traditional medicine. Abelmoschus moschatus is a warm-season crop that thrives in tropical and subtropical regions, requiring well-drained soil and full sun to partial shade. The plant has been used in traditional medicine for its anti-inflammatory, antibacterial, and antifungal properties, and its leaves and flowers are used as a vegetable and in salads. In contrast, the seeds are used as a spice. The plant's essential oil is also used in perfumes, cosmetics, and aromatherapy products, making it a valuable crop for small-scale farmers, providing income through the sale of seeds, leaves, and essential oil.
Origin and distribution
Abelmoschus moschatus, a tropical plant species, is native to India and widely cultivated in Southern China, Vietnam, Nepal, Tropical Asia, South East Asia, and parts of the Pacific. It is also found in the tropical regions of Africa, Australia, and the Americas.

Medicinal and Aromatic Plants (MAPs) are vital components of traditional medicine, perfumery, and cosmetics. To ensure the quality and sustainability of these plants, it is essential to adopt Good Collection and Agricultural Practices (GCAP). GCAP encompasses a set of guidelines and practices that promote the responsible cultivation, collection, and harvesting of MAPs.
Principles of GCAP
Sustainability: Ensure that the cultivation and collection of MAPs are sustainable and do not harm the environment or deplete natural resources. Quality: Maintain the highest quality standards for MAPs, from cultivation to harvesting and processing.
Traceability: Ensure that MAPs are traceable from the farm to the consumer, to guarantee authenticity and quality.
Fair Trade: Promote fair trade practices, ensuring that farmers and collectors receive fair prices for their products.
Environmental Stewardship: Protect biodiversity, conserve water, and minimize waste and pollution.
Agricultural Practices
Soil Conservation: Implement soil conservation techniques, such as contour farming and mulching, to prevent soil erosion.

Abstract
The village Kakching Khunou of Thoubal District, Manipur is found highly suitable for Watermelon cultivation. Mr. Thokchom Nganthoi Singh a young
farmer who is a novice in agri-business proved to be successful agri-business of watermelon in Kakching Khunou. The study noted that prominent extension approach was of farmer-to-farmer extension while venturing the enterprise. The total cost for cultivation of watermelon was around `50000-60000/- per Ha with a profit of ` 1,50,000/- per Ha. In three years (2016-18) the farmer mark as success in cultivation of watermelon and also started cultivating cucumber and other vegetable crops in his small farm successfully.
Keywords: Watermelon, Agri-business, Farmer, Kakching Khunou
Introduction
Watermelon (Citrullus lanatus), family Cucurbitaceae originated from West- Africa augurs well as a very promising scrambler and trailer fruit plant.

India is known as the food basket of the world. It is the second largest producer of fruit till now after China, but its contribution to the Global market of fruit processing is just 1per cent. This is due to the fact that there is deficiency of skilled manpower, poor cold storage facilities, inefficient post-harvest management and minimal technological interventions.
Deficiency of the skilled manpower: In-spite of market size of US dollar 181 billion, expenditure on food and food products being 21per cent of India’s GDP and more than 31per cent share of wallet by consumers, there is resultant apprehension about the emergency emerging skill shortages due to mismatch between the demand for specific skills and available supply. Shortage of skilled, Semi- skilled and unskilled workers has emerged as a critical factor impacting the competitiveness of Indian food industry. Efficient man-power is one such critical element to improve to foster the growth. As the food industry advances and adopts various levels of automation the demand of skilled manpower will increase phenomenally. Hence if, the Indian food industry must achieve projected growth target set and become globally competitive, the need to develop and train the human resource efficiently would be essential.

1. Peeling: It is one of the integral parts of a food processing, and most agri-cultural crops need to be peeled to remove at the initial stage of food processing Peeling removes inedible portion (peel, seeds, and stalk) of fruits and vegetables. However, the susceptibility to spoilage increases due to acceleration of physiological process and the exposure of the tissues to microorganisms. The shelf-life and quality of fresh-cu produces could be compromised with the peeling.
The goals of optimum peeling operation are i. Minimizing product losses, ii. Types of products e.g., potato products, iii. Minimizing heat ring formation e.g., apple, potato, iv. Minimizing energy and chemical usage, v. Minimizing the environmental pollution.
Peeling operation can be grouped under following categories: Manual peeling (knife or blade), Mechanical peeling (abrasive devices, devices with drums, rollers, knives or blades and milling cutters), Chemical peeling, Enzymatic peeling, and Thermal peeling (Flame or dry heat peeling, steam or wet heat peeling, thermal blast peeling, and vapour explosion or vacuum peeling.

Introduction
Dill seed/sowa belong to the genus Anethum and it is derivative of Greek word ‘aneeson or aneeton’, meaning thereby strong smell. The botanical name of dill seed is Anethum graveolens L. It is the only species falling in the genus Anethum, and known as East Indian dill or Sowa (Anethum graveolens var. sowa Roxb. ex, Flem.) in India. It is cultivated as a foliage crop in rabi season stretched in the Indian subcontinent.
Origin
It seems to be originated in South-east Europe or South-west Asia and also native to Central Asia, Mediterranean and southern USSR. It belongs to India, as it is found growing in the states of Maharashtra, Gujarat, A.P., M.P. and Rajasthan.
Uses
• Used as in abdominal discomfort, colic and promoting digestion.
• Cures ‘vata’, ‘kapha’, ulcers, eye diseases and uterine pains.
• Paste of dill seed with milk is used for external use in rheumatic and swellings of joints.
• Attributed to tonic, rejuvenating and intellect promoting properties.
• Used as condiment.
• Seeds are used as carminative, aromatic, galactogogue, mildly diuretic, stomachic and stimulant.

Duration: 60-75 minutes
Objective: Master techniques to prioritize tasks, meet deadlines, and reduce stress for improved productivity and work-life balance.
Why It Matters
Effective time management ensures focus on high-impact tasks, reduces procrastination, and prevents burnout. Poor time management leads to missed deadlines, stress, and lower quality work. For example, spending hours on emails instead of strategic planning can derail priorities. This module provides tools to optimize time usage.
Learning Outcomes: By the end of this module, participants will:
1. Understand prioritization and planning techniques (e.g., Eisenhower Matrix, Pomodoro).
2. Practice strategies to minimize distractions and delegate effectively.
3. Create a personalized time management plan.

Duration: 60-75 minutes
Objective: Build resilience and flexibility to thrive in changing environments, embracing new challenges and opportunities.
Why It Matters
In today’s fast-paced world, adaptability ensures you can handle disruptions, learn new skills, and stay relevant. Resistance to change leads to stress and missed opportunities. For example, adapting to a new software tool can boost efficiency, while resisting it can hinder performance. This module equips participants to embrace change confidently.
Learning Outcomes: By the end of this module, participants will:
1. Understand the importance of a growth mindset and resilience.
2. Practice strategies to cope with change and learn new skills.
3. Develop a personal adaptability plan.
Key Concepts
1. Growth Mindset View challenges as opportunities to grow.
• Embrace Learning: See setbacks as feedback (e.g., “This failed project taught me better planning”).
• Stay Curious: Ask questions and explore new ideas (e.g., “How can this new process improve my work?”).
• Seek Feedback: Use input to improve, even if it’s uncomfortable.

Technology Scouting and Innovations in Technology Incubation
Technology scouting and innovations in technology incubation have a symbiotic relationship, fuelling each other for the benefit of budding startups and the broader technology ecosystem. Let’s dive deeper into their individual roles and how they interact:
Technology Scouting
Technology Scouting is the process of discovering, analyzing and evaluating new or existing technologies that will help them with their innovation process. In simple terms, it is a process for companies to find the necessary technology outside the company.
Hunting for promising technologies: Scouts actively search for emerging technologies, patents, research advancements, and market trends across various sectors.
Evaluating potential and fit: They assess the technical feasibility, market potential, and compatibility with the needs of incubators and their supported startups.
Connecting innovators and ventures: Scouts bridge the gap between technology creators (researchers, inventors, startups) and potential users (incubators, established companies).
Fuelling innovation pipelines: Technology scouting helps incubators access a wider range of technologies and ideas, enriching their portfolio and diversifying the innovations supported.

Introduction
Sterilization of culture media, containers, and instruments is crucial in bacteriological work to ensure the isolation and maintenance of pure cultures. Sterilization and sanitization are essential processes in a microbiology lab to prevent contamination and ensure accurate results. Sterilization refers to the complete elimination of all microorganisms, including bacteria, fungi, viruses, and spores, using methods like autoclaving, dry heat, filtration, and chemical agents. Sanitization, on the other hand, reduces microbial load to a safe level through cleaning and disinfection using alcohols, detergents, and UV light. These practices maintain aseptic conditions, protect lab personnel, and preserve sample integrity. Proper sterilization and sanitization are fundamental to microbiological research, clinical diagnostics, and industrial applications, ensuring reliable and reproducible experimental outcomes.
Preparations for Sterilization Before sterilization, cleaned and dried test tubes and flasks should be carefully plugged with clean, non-absorbent cotton. Pipettes should also be plugged at
the mouth end, and the plugs should remain in place during use to minimize oral contamination. Cotton plugs provide sufficient ventilation for bacterial growth while preventing external contamination.

Introduction
This method is used to determine the ‘total bacterial count’ (living and dead  organisms) by direct microscopic examination in samples of broth culture, cell suspension and milk. Simple and Gram’s staining techniques are used to stain the cells. This method is simple and a rapid. A known volume (0.01 ml) of the sample is spread over a known area (1cm2) on a glass slide. The sample is allowed to dry; then stained and examined microscopically. The average number of cells per field is determined and is then calculated by applying microscopic factor.
Materials
1. Microscopic slide with one sq. cm. area marked
2. Breed’s pipette (0.01 ml)
3. Methylene blue or Newman’s stain
4. Culture of E.coli or Bacillus subtilis
Procedure
1. Measure the diameter of microscopic field with a stage micrometer using oil immersion objective and 10X eye piece.
2. Area of field πr2.
Determination of microscopic factor (MF)

Introduction
Some species of rod shaped bacteria e.g. E.coli, Ps. fluorescence, Bacillus subtilis are known to be motile. Bacterial motility is generally associated with the presence of hair-like appendages called “Flagella”. There are several ways for determining the motility of a culture such as the wet mount method, hanging drop method and a culture method (on semisolid medium). Bacterial cells in suspension also exhibit a vibratory or oscillatory movement without changing their relative position. This is termed ’Brownian Movement’ and it should not be confused for true motility of bacteria. In motility the cells change their relative position and move across the microscopic field in different directions.
1. The Wet Mount Technique
This is the simplest and quickest way to determine the motility of bacteria.
Materials
1. Clean glass slide
2. Broth culture of bacteria (E.coli, Ps.fluroscenes)
3. Cover glass
Procedure
1. Place a drop of organisms on clean glass slide and cover with a cover glass.
2. Examine the slide with phase contrast microscope or bright field microscope with reduced light under oil-immersion.

Introduction
The characteristics of bacteria used in the study and identification of bacteria depend upon the behavior of populations or cultures rather than of individual organisms. Nutrient materials provided in a form, suitable for growth, are known as culture media. A Growth Media or culture medium is a liquid or gel designed to support the growth of microorganisms or cells.
I. Types of Culture Media
Different types of culture media may be used for cultivation of microorganisms such as liquid, solid and semi-solid.
i) Liquid Culture Media: Includes nutrient broth, Glucose broth, litmus milk etc. these media are used for the preparation of large number of microorganisms, fermentation studies and various other tests.
ii) Solid Media: A little agar, gelatin or silica gel; is added to a liquid medium to impart a degree of firmness to it. Nutrient agar, Blood agar, etc. are examples of solid media that are used for developing surface colony growth of bacteria and mold.
iii) Agar Slant Media: Test tubes or small bottles containing about 5ml. of solid medium, e.g. nutrient agar, dissolved and allowed to cool in a sloping position.
iv) Stab Media: Tubes or bottles containing agar medium are allowed to solidify in the upright position.
v) Semi solid Media: These are more jelly like due to lower percentage of the solidifiers. These media are particularly used for determining motility of bacteria.

Introduction
In order to study the cultural, morphological and physiological characteristics of an individual species, a pure culture of the microorganisms is required. Several different methods of separating the microorganisms from a mixed culture are available. The two most frequently used methods involve making a pour plate and/or streak plate. Isolated colonies are obtained from individual organisms after incubation.
Streak Plate Method
Plating is generally applied to the inoculation of a medium in petridish. Streak plate method is best for the separation of organisms from a mixed culture. In this method, agar medium is allowed to solidify as a thin layer in a petri dish and culture is streaked on the surface of agar medium and allowed to incubate to get isolated colonies.
Materials
1. Sterile petri plate
2. Wire loop
3. Nutrient agar medium
4. Bunsen burner
5. Mixed culture of E.coli and Micrococcus leutus

Introduction
A) Cultivation of Fungi
A fungus is any member of the group of eukaryotic organisms that includes microorganisms such as yeasts and molds, as well as the more familiar mushrooms. These organisms are classified as a kingdom, Fungi, which is separate from the other eukaryotic life kingdoms of plants and animals. A characteristic that places fungi in a different kingdom from plants, bacteria, and some protests is chitin in their cell walls. Similar to animals, fungi are heterotrophy; they acquire their food by absorbing dissolved molecules, typically by secreting digestive enzymes into their environment. Fungi do not photosynthesize. Growth is their means of mobility, except for spores (a few of which are flagellated), which may travel through the air or water. Fungi are the principal decomposers in ecological systems. These and other differences place fungi in a single group of related organisms, named the Eumycota (true fungi or Eumycetes), which share a common ancestor (form a monophyleticgroup), an interpretation that is also strongly supported by molecular phylogenetics. This fungal group is distinct from the structurally similar myxomycetes (slime molds) and oomycetes (water molds). The discipline of biology devoted to the study of fungi is known as mycology. In the past, mycology was regarded as a branch of botany, although now known fungi are genetically more closely related to animals than to plants.

A family of about 175 genera and 2,500 species, Amaranthaceae are mostly distributed in tropical but also in temperate regions. About 18 genera and over 50 species have been reported from India. Some of the larger genera with the number of their approximately reported species and common names are Alternanthera (200, alligator weed), Gomphrena (100, globe amaranth), Iresine (80, gizzard plant), Amaranths (60, pigweed) and Celosia (60, cock’s comb).
Gomphrenas are 30-40 cm tall, bushy with erect stems, hairy, light green with oblong-ovate leaves tapering towards the base. Round button like or spherical flower head is a cylindrical spike 1-2 cm long and 1 cm in diameter and may be terminal and/or axillary, and are born on long, thin stems above the foliage. Each flower head has tiny, conspicuous, papery, colourful bracts which enclose the inconspicuous true flowers. Bracts ovate, three mm long, apex acuminate, bracteoles 4.5-5.5 mm long. Ovary is sub-globose with two stigmas. Seed is brown, lustrous, 1.5 mm long (Wagner et al., 1999). It has both C3 and C4 pathway.
Selected Indian Genera
Achyranthes, Alternanthera, Amaranths, Celosia, Digera, Gomphrena and Pupalia.

Represented by about 120 genera and over 800 species. Bignoniaceae are distributed mainly in tropical and sub-tropical, and a few in temperate regions. About 15 genera and 40 species are found in India. Some of the larger genera along with their approximate number of worldover reported species are Tabebuia (100), Arraabidaea (70), Jacaranda (50), Anemopaegma (30), Tecoma (16), Catalpa (11) and Crescentia (5).
Selected Indian Genera
Jacaranda, Kigelia, Millingtonia, Tecoma, Heterophragma, Oroxylum and Dolichandrone. Economic Importance
1. Ornamental plants of the family include handsome trees (Catalpa bignonioides, Haplophragma adenophyllum, Jacaranda mimosaefolia, (Fig. 26.1), Kigelia pinnata, Millingtonia hortensis, Spathodea campanulata and Tabebuia spectabilis), shrubs (Bignonia unguis-cati), beautiful tendril-climbers (Adenocalymna alliaceum, Bignonia venusta syn. Pyrostegia venusta), aerial rootlet climbers (Campis grandiflora and C. radicans) and herbaceous genus Incarvillea.

It is a monotypic or unigeneric family represented by four genera containing about 91 species distributed mainly in north-east Australia and also in Fiji, New Caledonia, Malaysia and Mascarene islands. Only one species (Casuarina equisetifolia) occurs in India, and this is the most common species of the world.
Selected Genera
Casuarina, Gymnostoma, Allocasuarina, Ceuthostoma.
Economic Importance
Casuarina is important mainly as timber tree. The wood of C. equisetifolia, C. cunningbamia and C. stricta is used for furniture, for fuel and also for basket making. The bark of C. suberosa and C. stricta is utilized for tanning. C. equisetifolia is usually grown as an ornamental and also in order to reclaim sandy dunes in India and several countries.

Family Combretaceae contains about 20 genera and 600 species distributed mainly in the tropical and sub-tropical countries of the world (Rahate et al., 2019). Eight genera and about 45 species of this family have been reported from India, chiefly from Assam and West Bengal. Combretum and Terminalia are two largest genera of the family. Lumnitzera littoria is found as a mangrove plant in Sundanban and other tidal forests of India.
Terminalia bellirica is tall tree and leaves clustered near ends of branches. Flowers are small, pale green, arise in simple spikes. Fruit is ovoid, 3 cm long, brownish & densely covered with hairs and contains 5-17 per cent tannins. Unripe fruit is used as astringent but ripe fruit is purgative. Fruit powder is used as tonic & laxative and useful in piles, leprosy, dropsy and fever. Fruit of T. chebula is astringent and laxative. Roasted fruits are used to treat cough, chronic ulcer, wounds & scalds, used in dyeing and tanning purposes, fruit decoction is used in bleeding and ulceration of gums
Description of Family
1. General habit: A family of exclusively arborescent taxa, consisting of tall trees or woody twiners of lianas, such as Combretum and Quisqualis.
2. Stem: Solid with large mucilaginous sacs and abundant tannin.
3. Leaves: Simple, alternate or sometimes opposite (Quisqualis); exstipulate; margin entire.