eChapters

Introduction

Species of Polygonatum, traditional known for their therapeutic properties for treating different ailments,are fairly well represented in temperate Northern Hemisphere in Asia, America and Europe and find use. In India, P. cirrhifolium, and P. verticillatum are the two important constituting species of Ashtavarga, but have attained a threatened status due to overexploitation. Of the 60 odd known species of the genus, less than 10 have been explored phyto-chemically. Their status varies species wise, at regional and global level.

14.1 Introduction

Proteins are the substances formed from nitrogen containing amino acids and are principle structural components of body tissues and muscle. In addition, they are used to produce various hormones, enzymes and hemoglobin in human body. Due to the shift from agricultural to electronics and other fast paying industrial development, most of the countries around the world, ceased to be self-sufficient in their food production in particular protein, which is necessary to satisfy their optimum food demands. The biotechnology development and its usage to agriculture have brought hope to them. The need for food by modernization of agriculture has gained much attention throughout the world. However, the necessity for exploring unconventional and non-agricultural means of food production, especially of proteins rich food, cannot be over-emphasized due to the tremendous growth of human populations in several regions of the world. In addition to this, the importance of protein in food nutrient cannot be put aside because its shortage causes various malnutrition problems and the most lethal malnutrition problem is Protein-Energy-Malnutrition (PEM). The United Nations Food and Agriculture Organization estimates that nearly 870 million people of the 7.1 billion people in the world, or one in eight, were suffering from chronic undernourishment in 2010-2012. There are 925 million people undernourished in developed countries (FAO October, 2010). This situation has created a demand for the formulation of innovative and alternative proteinaceous food sources having high nutritional value. These sources have to be non-competitive with food for human consumption, economically feasible and locally available. This demands a search for new protein sources, with high nutritional value, economically feasible and locally available. Use of microbes as a food source is one of the biotechnological innovations that will certainly increase the availability of affordable protein in the world to solve the global food and feed problems.

In recent decades there has been an increased interest in the industrial production of microbiological protein for use in both human and animal nutrition. The main reason behind it is that there has been the shortage of low cost protein sources in view of the increasing human population and living standards, resulting in famine in some parts of the world and increased demand for animal protein in others.

Abstract

Multiflash drying (MFD) process is based on the application of multiple cycles of heatingvacuum pulse to a solid food. Heat can be provided by convection (from hot air), conduction (by contact with a hot surface), microwaves, or by a combination of these methods. Due to the moderate temperatures applied to the drying food, and the sudden decompression step (vacuum pulse), MFD processes allow obtaining crispyanddried foods with very good nutritional and sensory properties. Vacuum pulses cause food texturization, which depends on the pressure drop rate during decompression. In fact, the dried products are similar to freezedried foods, but with more open structures, which result in higher crispness. The dehydration can be performed in relatively short processing times, when compared with traditional drying processes (e.g. solar drying, airdrying, vacuum drying and freezedrying). The short process time indicates clearly that this class of drying process presents a huge potential to the production of driedandcrisp foods at industrial scale.

India has achieved a commendable position of being the highest milk producing country in the world. Nearly 110 million tons of milk per annum is contributed by small and marginal farmers having 2-3 milch animals which are scattered in lakhs of villages across the length and breath of India. The poor socio-economic conditions are serious constraints in producing raw milk of good quality. The quality of milk is further deteriorated during subsequent handling and transportation. Milk being a product of biological origin, is extremely vulnerable to attack by microbes. It is also a good vehicle for additives and adulterants without any apparent changes in its appearance. Thus, milk is susceptible to several post-secretion changes, some natural and some man-made.

Indian dairy industry faces a mammoth task to meet the world quality standards, particularly in the present context of globalization and increasing quality conscious consumers. In view of the highly perishable nature of milk soon after it is secreted, it is important to monitor its quality by having a firmly installed quality assurance programme along the entire production-to-supply chain. This can be possible with application of sensitive, accurate and rapid methodologies as a tool in quality assurance programmes.

Quality comprises of several attributes ranging from physical, chemical, technological and bacteriological through nutritional to aesthetic. All dairy plants have a quality assurance laboratory (Fig. 8.1) and usually follow chemical quality control with the intention of payments to contractors/producers, processing of milk and meeting mandatory requirements for end products. Quality is judged both by objective and subjective tests.

Most of the plants undergo a period of rest, and in this period, the growth activities temporarily halt. The whole plant looses its aerial parts and undergoes a rest period in the form of rhizome, corm, or tuber. Researchers who study fruit trees use the term rest for dormancy (Samish, 1954). This period is sometimes called as quiescence. The term rest and quiescence can be included under common category dormancy. Some workers differentiate the term dormancy and rest period (Burton, 1964). Wareing and Co-workers (Robinson and Wareing, 1964; Wareing et al., 1964) isolated dormancy inducing substance in sycamore seedlings (Acer pseudoplatanus) which was named as dormin. Further, analysis of this substance by Cornforth et al. (1965) reveals that dormin was identical to Abscisin-II (a substance speeding the abscission of the young flowers of Lupinus luteus and have antiauxin effect).

Dormancy can be defined as an arrest in development of buds, seeds, embryos, or spores under conditions otherwise suited for growth (Taylorson and Hendricks, 1977). It is a survival strategy (exhibited by many plant species), which enables them to survive in climates where part of the year such as winter or dry seasons is unsuitable for growth. The dormancy may be due to the factors within the dormant organ or seed itself and it is called spontaneous dormancy. This type of dormancy is found in seeds, buds and perenating organs like tubers, bulbs, bulbils, corms and rhizomes. In some weeds, dormancy is caused by high or low temperature and this type of dormancy is called as imposed dormancy. Seeds normally germinate in darkness but are inhibited by light are considered to become dormant after exposure to light (Bewley and Black, 1982; 1985). Seeds that require light for germination are said to be photo dormant.

Vegetables form an important component of our daily diet as they provide necessary nutrients to the diet and they add colour, texture and flavour to it. Vegetables contain very high content of water (about 78 to 98%) and are reasonably good source of starch, sugar, cellulose, hemicellulose, pentosans and pectic substances. They also contribute minerals, vitamins and indigestible fibers to our diet. The yellow, orange and dark green leafy vegetables are rich source of carotenes- the precursors of vitamin A. Non-volatile acids, such as citric, malic, oxalic and succinic acids, contribute to their flavour. The very strong flavour characteristics of some vegetables like onion, garlic, cabbage, cauliflower, etc. are due to certain sulfur containing volatile compounds. However, vegetables, in general, are poor source of protein and amino acids.

India has made significant progress in the production of vegetables since independence because its diverse agro-climatic zones ranging from tropical to temperate allow the production of a wide spectrum of vegetables.At present, the country is producing about 108 million tonnes of vegetables and considered the second largest producer in the world (Venkatesan et al., 2006). Currently, the plant breeders are focusing their efforts to produce high yielding varieties having resistance against diseases and herbicides and tolerance against drought and salinity. Therefore, the physical aspects of quality, i.e., shape, size, texture, colour, tenderness, etc. are given due priority in the breeding programme with no emphasis to the biochemical and nutritional quality parameters, which include dry matter, proteins, vitamins, sugars, flavouring compounds, alkaloids, flavonoids, etc. However, under present set up of World Trade Organization (WTO), the country will have to compete with quality conscious European and developed countries, and with inferior quality product, it would not be possible to penetrate the foreign market. Therefore, breeding programme in a country like India with future-plans of globalization of agriculture produce must be aimed at achieving good nutritional quality. In different types of vegetable, a varied set of biochemical parameters determines the quality. In this chapter, the methods for qualitative and quantitative determination of these parameters in vegetables have been described.

The extreme weather events of the present day and the expected future climate scenarios at global and regional scales have been attributed to the changes in the atmospheric chemical composition and the massive amounts of greenhouse gases (GHGs) emitted by humans since the industrial revolution, bringing about the global warming and resulting in Climate Change. Further, the natural disasters like flash floods are attributed to the highly conspicuous human interventions with nature – the earth and its atmosphere. The parody of the situation is that, while the GHGs sourcing countries are mainly the developed ones, the sink of the result are the agrariandominated and ecosensitive economies of the tropics. Invariably, tropical regions are to be affected the most, because, on the one hand the general circulation of the atmosphere directly and naturally causes divergence of the polluted air from extra tropical regions towards tropics, while on the other, the industrialization within the tropical regions too would affect the local atmosphere. Karnataka State, being located well within the tropics, can be truly impacted by the climate change caused by anthropogenic sources and it is demarcated into 10 agroclimatic zones (Fig. 9.1) based on crops, soils and climate. Climate experts have warned that Karnataka is likely to be more vulnerable to climate change than other states in India. The specific impact would be in terms of warming, to the extent of 1.52.0° Celsius by 2030s under the likely highemissions scenario, compared to the preindustrial period (1880s) levels. Dependable flow in many reservoirs would be 75 per cent to 90 per cent by the middle of the present century. Reduced availability of surface +water, higher water stress for crops, floods and drought are expected to make, particularly, Kalaburgi, Raichur and Yadgir districts, vulnerable to climate change. Assessment of the impact of climate change showed that the yield of rice, maize, sorghum, red gram and ragi is likely to decline by the 2030s, anticipating setting off a food crisis. Changes in Forest and biodiversity types imply that

In order to achieve maximum and sustainable crop production from available farm resources, it is essential to have proper knowledge of the agro-climatic resources of the location/region. Therefore, a thorough understanding of the climatic conditions would help in determining the suitable agricultural management practices for taking advantage of the favorable weather conditions and avoiding or minimizing risks due to adverse weather conditions. better planning of cropping pattern, developing irrigation and drainage plans for an area (Chaudhary et al. 2015). Hence, trends of temperature and rainfall are studied in this section with possible impact studies on rice production for Chhattisgarh state. Challenges of rainfed rice production can be understood through trend studies of key weather variables. Analysis of rainfall in the context of rainfed rice production in Chhattisgarh state has been carried out. Analysis has been done at Department of Agrometeorology under All India Co-ordinated Research Project (Raipur) to characterize the key weather parameters statistics.

Landscape models focus on both the integrated master landscape planning of a home gardening and specific garden design. The people should be educated to realize the importance of gardening, by providing good parks and gardens in cities for a large population to relax and enjoy the beauty of nature. The plants used in the landscape designing of gardens are directly or indirectly involved in increasing the aesthetic value of the city, changing microclimate, social behaviour of the people, checking pollution etc. The importance of landscape gardening in human welfare cannot be overlooked. Even in an under-developed country as India, people do not live by bread alone. They also need some finer things of life. The models described in this chapter are very basic features of any garden.

Garden Walls

A garden lover will never like to block the view of his garden by putting a wall along periphery of the garden. A garden as it is enjoyed from inside should also be visible from outside but sometimes, it is necessary from safety and beauty point of view to obscure the ugly sight of an open drain. A compromise is to have a low brick wall of say 60-90 cm height and to put over it some grills, so that the view is not totally obstructed from outside. Alternatively, walls from 1.80 to 5.0 m may also be erected based upon the size of the garden.

Abstract

A key problem in spatial-mathematical-model-based mineral potential mapping is the selection of appropriate functions that can effectively approximate the complex relationship between target mineral deposits and recognition criteria. This paper evaluates a series of spatial mathematical models based on different linear and non-linear functions by applying them to base-metal potential mapping of the Aravalli province, western India. Linear models applied are an extended weights-of-evidence model and a hybrid fuzzy weights-of-evidence model, while non-linear models are knowledge and data-driven fuzzy models, a neural network model, a hybrid neuro-fuzzy model and an augmented naive Bayesian classifier model. The parameters of the knowledge-driven fuzzy model are estimated from the expert knowledge, while those of the neural network and Bayesian classifier model are estimated from the data. The two hybrid models use both expert knowledge and data for parameter estimation.

As compared to the linear models, the non-linear models generally perform better in predicting the known base-metal deposits in the study area. Although the linear models do not fit the data as efficiently as the non-linear models, they are easier to implement using basic GIS functionalities and their parameters are more amenable to geoscientific interpretation. In addition, the linear models are less susceptible to the curse of dimensionality as compared to non-linear models, which makes them more suitable for applications to mineral potential mapping of the areas where there is a paucity of training mineral deposits. The hybrid models that conjunctively use both knowledge and data for parameter estimation generally perform better than purely knowledge-driven or purely data-driven models.

Abstract

As part of the Enterprise Information Portal (EIP) project, an Enterprise-wide Geographic Information System has been implemented through which Intranet / Internet users enjoying different access levels can quickly search for, locate and visualize geoscientific information generated by Geological Survey of India (GSI). The proposed system will provide real-time response to information needs and will use secure Internet technology to deliver information to bonafide users. It consists of an application that will enable data owners to load new data sets, update/replace existing data sets in a highly secure environment, load and maintain metadata about their data sets in a Data Catalog and a subsystem that will query, search, locate and display geoinformation stored in the centralized Geodatabase.

Enterprise GIS has been deployed primarily using a relational database, a spatial database engine tool, an Internet Map server tool, and integrating the existing ArcGIS desktop GIS clients. The approach is to import data from distributed data sources into the centralized repository using a customized extraction-transformation-loading (ETL) tool, thereby making appropriate structural changes to ensure homogeneity at various levels, and load into the main Geodatabase.

While delineating the functionalities of enterprise GIS solution an earnest attempt was made to accommodate the diverse needs of the organization, including its processes, activities, products and the whole gamut of users at different levels from the field geologist to the decision makers. An effort was also made to standardize various data automation processes and to iron out the heterogeneities existing in legacy data. Ultimately, GSI aspires to create a seamless geospatial database for the entire geographic extent of the country, which can be easily shared by the geoscientific community.

Fats are rich sources of energy. Fats provide 2.25 times more available enrgy than carbohydrates. Fats also increase the palatability and reduce the dustiness of feed. Fats and fatty acids decrease the heat increment in the body. Fatty acids are also involved in number of physiological functions of the body. Recently, considerable interest has been shown on studies pertaining to dietary supplementation of polyunsaturated fatty acids (PUFA) in animal feed and their role in animal health and production.

Phytobiotics are plant derivatives such as herbs, plant extracts or spices and have a wide range of activities such as stimulation of feed intake, growth and endogenous secretions in the gut. They act as immunomodulators resulting in decreased mortality and also have coccidiostatic, anti microbial, anthelminthic and anti-inf lammatory activities. Phytobiotics also possess hepatoprotective and hepatogenic properties, which tone up liver resulting in increased nutrient utilization and better performance. Herbs like Achyranthes aspera (Prickly Chaff Flower, Devil’s Horsewhip, Apamarga), Andrographis paniculata (Green chirayta, King of bitters, Kalamegha), Azadirachta indica (Neem), Boerhaavia diffusa (Spreading Hogweed, Punarnava), Eclipta alba (False Daisy, Bhringaraj), Ichnocarpus frutescens (Black creeper, Utpalagopa), Terminalia chebula (Black myrobalan, Haritaki). These herbs have hepatostimulant, hepato-protective, immunomodulatory and antioxidant activities (Sadekar et al., 1998; Manu and Kuttan, 2009; Michels et al., 2011, Dash et al., 2007). Further, they optimize digestion and metabolism resulting in better protein utilization, improved mucosal function and reduced cost of metabolic deamination. Andrographolide and 14-deoxy-11, 12-didehydro-andrographolide isolated from Andrographis paniculata inhibits free radical activities and lipid peroxidation. Inhibition of lipid peroxidation in meat prevents free radical production thereby preserving meat composition, colour and improvement in shelf life. In addition, it has been studied that a herb Terminalia chebula helps to reduce stress (Selvakumar et al., 2007).

Introduction

Seeds are regarded as carriers of new technology and serve as basic catalytic input for enhancing the agricultural production. Hence the timely availability of quality seeds of the right variety in adequate quantity decides the strength of an agricultural economy. The intensive crop improvement programmes have resulted in the development of large number of hybrids and high yielding varieties in many important crops. Today, the Indian seed industry is the fifth largest seed market in the world, accounting for 4.4 per cent of global seed market. In terms of global trade, India is almost self-sufficient in flower, fruits and vegetables and field crops seeds (Anonymous, 2015). Economy of crops depends on good crop variety. Farmers choose these verities based on good quality traits and satisfactory yield. Thus, it is always essential to do fidelity check of all plant variety. The genetic purity is one of the most important aspects of quality control. Seed quality includes good germination, purity, seed health and vigour. With the increase in seed industry, there has been a refinement in the techniques used for testing genetic purity or genuineness of seed purity. Methods for testing genetic purity include different morphological, chemical, biochemical and molecular markers. Under PPV & FR Act, DUS (distinctiveness, uniformity, stability) testing procedure is performed with morphological descriptors. However, in agriculture, biotechnology has found applications in checking of true to type of clones and variety identification programs using molecular and chemical markers. Markers that reveal polymorphisms at the protein level are known as biochemical markers, while DNA markers reveal polymorphisms at the DNA level.

“Hydrology is the science that treats the waters of the earth, their occurrence, circulation and distribution, their chemical and physical properties, and their reaction with their environment, including their relation with living things. The domain of hydrology embraces the full life history of water on the earth.” (Federal Council for Science and Technology, “Scientific Hydrology”, Washington, 1962)

This definition puts in a nutshell what is most often inadequately done before undertaking exploitation of water resources. In short, it is the scientific inputs that are likely to be missed while planning water resources management projects. It is the “full life history of water” part of the above definition that is of specific relevance to the theme of this book, Isotope Hydrology.

Conventional hydrology is strong on measurement and quantification of different parts of the hydrological cycle (Fig.1.1), be it precipitation, run-off, evaporation, transpiration, infiltration, groundwater dynamics etc. Through chemistry and isotopes, we try to understand the processes themselves in order to delineate the history of that part of the hydrological cycle that is being studied. For example, if we are measuring river flow, we would like to know the contribution of different components; base flow, rainfall run-off and snow melt, if any.

Let’s see what we know and what do not know in the conventional hydrological practice. We know surface waters evaporate, form into clouds and precipitation occurs under favourable weather conditions. What we often do not know is the source of moisture, oceanic or inland.

ABSTRACT

Butea monosperma (Lam.) Taub, knownas ’Flameof the Forest’is used in Indian traditional system of medicine, such as Siddha Ayurveda, and Unani due to its medicinal properties. It is used in treatment of diabetes, diarrhoea, sore throat and reported to possess several biological activities such as anti-asthmatic, anti-diabetic, antifertility, anti-tumor and osteogenic. Recent studies revealed the phytochemicals responsible for osteogenic activity in the bark of B. monosperma. An ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method was developed for identification and simultaneous quantitation of bioactive compounds from B. monosperma. Validation of the developed method was performed according to international conference on harmonization guidelines. Quantitative interpretation showed significant variations in the content of bioactive compounds in different parts of the plant and samples collected from three geographical regions. Principal component analysis was also used to study the quantitative variations of markers.

ABSTRACT

The present communication deals with the impact and contribution on livelihood sustainability based on forest resources and sacred places in nine fringe villages of Pangolakha Wild Life Sanctuary (PWLS), located in Sikkim Himalaya. Populations density in villages varies from 23 at Nayabusty and 274 at Padamchen. Populations were categorised under three age groups viz. minor (15-25 yrs), major (26-36 yrs) and elder (over 36 years). Approximate by 27.6% populations had minimal primary education. Agriculture is the main activity in Suvaneydara (86.7%), Agamlok (85.3%) and in Nayabustyy (82.3%). Villagers in Padamchen (12.5%) and in Nathang (12.5%) are either dependent on Government job (38.2%) or seasonal flow of tourist (25%). The educational qualification in these villages is classes 5 to 10 standards. 91.1% of people rely on forest resources. About 70% of the villagers depicts that forest cover of the region is improving. The availability of fodders (70%) and fuel woods (60%) are still in abundance. People depend on tirja (private), khashmal and goucharan areas for grazing and fuel wood collection. Forty nine economical economically by valued plant species belonging to 46 genera and 35 families were documented. Subtropical ecosystems had high number of plant species. Poaceae was the dominant family (17%). Tree life form is abundant (51%). Total 24 species are harvested for edible purpose, 24% are freely sold in the local haats (market) for their livelihood sustenance. Principal Component Analysis (PCA) of nine villages with respect to forest resources indicated the village specific use pattern of plant resources. Indigenous inherent knowledge of local plants is decreasing in Lingtam. PWLS and its adjoining villages have important places with religious importance, heritage sites managed by the people. It was observed that exploitation of plant resources, lack of maintenance and fast changing concept of traditional ethics among youths, plant resources were degraded and in regenerating stage.

1. Introduction

Viruses are a unique group of infectious agents. They are distinct in their simple, acellular organization; however, they are the connecting link between live and dead. Viruses are also the perfect example of obligate intracellular parasitism. Despite their simplicity, plant viruses are extremely important and drawn attention of researches because they can be used as model to study the disease establishment and progression mechanism, reproduction inside the host and trilateral host-virus-vector relationships. Their small genome also gave liberty to extensively understand the genome evolution caused by the genetic exchange or recombination. As a consequence, this will help in the development of facile methods for management and control of new emerging viruses and their strains.

This chapter is written for the beginners and students of virology subject to provide the fundamental knowledge about the origin, history of plant virology, the general features of plant viruses, their structure, shape and size, mode of spread and development of their management strategies. Besides this, the new development of non-conventional methods for developing virus-resistance in plants has also been explained for enhancing the quality and production of commercial crops in the country.

Plants are used for many purposes apart from food such as industrial products like perfumes, pharmaceuticals, agrochemicals, food additives, cosmetics and also for rectifying the side effects of allopathic medicines, etc. Interest was taken in the chemical constituents of plants in the very early days of modern science. Plants were used for very many purposes besides providing food, such as for treating medical ailments and for dyeing in textiles.

To the agricultural chemists, any biological organism is ultimately constituted from the elements like C, H, O, N, P, Ca, Mg, S etc. Two or more elements combine to form complex organic compounds such as carbohydrates, fats, proteins, enzymes, alkaloids, glycosides, organic acids and many more complex compounds. These biomolecules can be classified into two main major metabolites. (1) Primary metabolites and (2) Secondary metabolites.

6.1 Introduction

All separation procedures depend mainly on some physical characteristics of the compounds. It is relatively easy to separate compounds that have significantly different physical characteristics by simple techniques such as solvent extraction. If the various compounds are similar to each other in their molecular size, any slight difference in any one of their physical properties is exploited to achieve separation. The separation and purification of plant constituents is mainly carried out using one or other, or a combination of chromatographic techniques: Paper Chromatography (PC), Thin Layer Chromatography (TLC), Column Chromatography (CC), High Performance Liquid Chromatography (HPTLC), Optimum Performance Laminar Chromatography (OPLC), Gas Liquid Chromatography (GLC) and High Performance Liquid Chromatography (HPLC). One further technique, which has fairly wide application in phytochemistry, is electrophoresis.

Food packaging is an essential technique for preserving food quality and minimizing food wastage. It is a scientific technique of containing food against physical, chemical and microbiological contaminants. In addition package also display the product in most appropriate manner and provide product information to the consumers while at the same time allowing convenient handling and efficient distribution. The packaging of meat and meat products are particularly important because meat is highly nutritious food and provides good medium for the growth of micro-organisms. Meat and meat products are also susceptible to bacterial growth due to their high water activity. Exposure of meat and meat products on atmospheric temperature and sunlight leads to various types of deteriorative changes. For example when cut meat surfaces exposed to ambient air provide excellent breeding grounds for most bacteria. Minced meat is even more at risk due to the large exposed surface area. Packaging provides protection of food against external and internal factors but once food gets deteriorated it can not be controlled by packaging. For this reason rigorous hygiene in all processing and pre-packaging steps is vital for packaging of perishable food items like meat and meat products.

In general, any business directly involved in food production can be certified, including seed suppliers, farmers, food processors, retailers and restaurants. Requirements vary from country to country, and generally involve a set of production standards for growing, storage, processing, packaging and shipping organic certification ensures:

• Avoidance of synthetic chemical inputs (e.g. Fertilizer, pesticides, antibiotics, food additives, etc) and genetically modified organisms;
• Use of farmland that has been free from chemicals for a number of years (often, three or more);
• Keeping detailed written production and sales records (audit trail);
• Maintaining strict physical separation of organic products from non-certified products and
• Undergoing periodical on-site inspections.

In some countries, certification is overseen by the government, and commercial use of the term organic is legally restricted. Certified organic producers are also subject to the same agricultural, food safety and other government regulations that apply to non-certified producers.

Sun is the prime source of energy injected into the earth’s atmosphere. The sun is the nearest star to the earth. It is a hot ball of glowing gases at the heart of the solar system. Its radiant energy is practically the only energy source to the earth. Very small and insignificant quantities of energy are available from other sources such as the interior of the earth, the moon, and other stars. Without the sun’s intense energy and heat, there would be no life on earth.

The mean distance of the sun from the earth, also known as one astronomical unit (1 AU), is approximately 1.496 × 10⁸ km, though the distance varies as the earth revolves round the sun in an elliptical orbit. At this average distance, light travels from the sun to earth in about 8 minutes and 19 seconds. The energy of the sunlight supports almost all life on earth by photosynthesis, and drives earth’s climate and weather. The minimum sun-earth distance is about 0.983 AU and the maximum is approximately 1.017 AU. The earth is at its closest point to the sun (perihelion) on around January 3 and at its farthest point (aphelion) on around July 4.

The sun makes up about 99.86% of the mass of the entire solar system. The visible disk or photosphere has a radius of 6.599 × 10⁵ km, and the solar mass is 1.989 × 10³⁰ kg. The sun is a completely gaseous body. The chemical composition (by mass) of the outer layers of sun is 71 per cent hydrogen, 26.5 per cent helium, and 2.5 per cent heavier elements like oxygen, carbon, neon, and iron among others. Since the sun is not a solid body, different parts of the sun rotate at different rates. At the equator, the sun spins once about every 25 earth days, but at its poles the sun rotates once on its axis every 36 days.

Temperature is the physical property of an object that quantitatively expresses the hotness or coldness. Objects of low temperature are cold, while various degrees of higher temperatures are referred to as warm or hot. When a heat transfer path between them is open, heat spontaneously flows from bodies of a higher temperature to bodies of lower temperature. If no net heat flow occurs between two objects, the objects have the same temperature which are then said to be in ‘thermal equilibrium’. Temperature plays an important role in all fields of natural and applied sciences. Most of the weather parameters are dependent on it, directly or indirectly. It has important role to play in the development and growth of all living organisms in all stages of their growth.

Atmosphere receives the heat energy from the sun and its temperature increases. Due to different amount of heat energy receipt at different places, the air temperatures at different places also vary. The variation in air temperature basically results into air motion, so as to equalise the energy content of the different regions of the earth. Thus, atmospheric temperature is one of the basic elements of weather and climate.

Abstract: Gerberas are popular seed and vegetatively propagated flower crop with numerous phenotypes, series and cultivars available on the world market. Crop improvement is currently focused on bicoloured mini gerbera, semi-double and spider type forms, and hybrid cultivars with expanded colour range to boost productivity and profitability. Application of genetic engineering techniques and tools are aiding in modern gerbera breeding. The need for new cultivars remains strong as production system become more specialized and new markets develop. Breeding objectives with high priority include cut flower cultivars highly resistant to diseases, tolerant to low temperature, and floral longevity.

Abstract: Water lily, bulbous ornamental, constitute element of aquatic gardens. A variety of flower colour, flower forms, modes of reproduction and leaf sizes exist in Nymphaea. This species is a complex hybrid group. A wide range of polyploidy (including aneuploidy, trisomy, polysomaty), polymorphism and heterozygosity exists within the cultivars of water lily. Genetic information and trait heritability is almost unknown for this crop. Breeders have created synthetic water lily hybrids. Low fecundity, limited fertility, reproductive barriers, low seed set, relatively low elemental (founding) species among elite germplasm often pose significant challenges to flower breeders. Breeding objectives with high priority include tolerance to drought, year round flowering and lower seed tannins. Future breeding and genetic studies are needed to further transform this crop.

Keywords: Nymphaea, correlation, sterility, interspecific hybridization polyploidy.

Seed yield is the foremost important attribute and is the end product of many complex component characters which singly or jointly influence the seed yield. Seed yield does not possess gene per se as such. It is the interaction phenotype of the harmonious understanding, mutual adjustment and manifestation of its component characters. As most of the component characters are polygenic, they are greatly influenced by the environment. So, the selection of genotypes based on yield as such is not likely to be effective. The information on the strength and direction of association of the component characters with seed yield and also among themselves will be very useful in formulating an effective breeding programme for seed yield improvement in a given time. Correlation studies provide about the magnitude and direction of genetic association between the seed yield and its component characters.

Correlation coefficients provide the measure of association between two characters. But, they do not provide the causal basis of such association. Further, correlation between seed yield and its component characters are often misleading due to the inter-relationship that exist among the component characters and the operation of size symmetry and component compensation that thwart the breeding progress. The direct contribution of each component to the seed yield and the indirect effects it has through its association with other components cannot be differentiated from mere correlation studies. This is how, it became necessary for a plant breeder to have information on the direct and indirect effects of these components on the seed yield to identify the key characters for improvement.

Abstracts

To ensure safe food and adequate sanitation programs, the equipment used for processing of food products must be designed, fabricated, constructed, and installed according to sound hygienic design principles. This ensures the equipment can be adequately cleaned and sanitized, and that surfaces are resistant to daily exposure to corrosive food products and cleaning/sanitizing chemicals. This chapter focuses primarily on fundamental principles of hygienic design, which protect the product from microbial, chemical, and foreign-body contamination. This is followed by a discussion of general aspects of hygienic construction and design of food equipments, the selection of materials of construction and specification of surface finishes, fabrication, installation and cleaning and sanitization. Quality of raw materials or foods ingredients, proper processing, packaging and storage of finished products decides the quality of the food products. Planning for plant and equipment layout, its design, services (water, air, refrigeration, steam), waste disposal etc. are some of the critical factors, which contributes to quality. In addition, the food processing equipment must comply with strict standards and regulations, which are necessary for securing the quality and safety of the food products to the consumers.

9.1 Introduction

Solar energy can be directly converted into electrical energy through photovoltaic route. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1. They are reliable, convenient and durable.
2. It is green, sustainable and pollution free technology.
3. Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).
4. Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.
5. Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.
6. Considerable expected lifetime i.e. 20 years or even more.
7. No distribution system is required, because they are decentralized source of energy and located at the place of use.

INTRODUCTION

Fish culture as a hobby or business is well established in India. Increased interest in fish culture has also increased awareness and experience with parasites that affect fish health, growth, and survival. Information provided in this chapter is intended for the novice fish culturist as a guide to common parasites of freshwater fish. Identification of parasites and their basic treatment is included; however, any herbal treatment alone or biological cum chemical treatment may be choosen for eradication purpose (Das et al., 1995a).

PREVENTION

This section will discuss ailments that affect the fish kept in our aquariums. We will simply not call them diseases because most are not true diseases but a response to some sort of stimuli such as poor tank water management or the presence of actual parasites. A list of the most common ailments, the reasons behind them and the appropriate action needed to “fix” the problem is given in this Chapter.

If you maintain good water quality, keep the right kind of fish together, feed good quality food and monitor all your water properties you will rarely have any problems. A few common sense precautions when you purchase new fish can save you a lot of trouble.

Phosphorus in soil present both in inorganic form and organic form. The inorganic P can be divided into different pools. The major active inorganic forms are: P bound to aluminium (Al-P), iron (Fe-P), calcium (Ca-P) and silicate minerals and relatively less active forms are occluded and reductant soluble forms of P. On the other hand the principal organic P compounds present in soil are (i) inositol phosphate, (ii) phospholipids, (iii) nucleic acid and other unidentified esters and phosphoproteins.

15.1. Determination of Available Soil P

The availability of soil P to plant varies greatly depending upon the reaction, minerological composition and amount of the soil colloid. Very little P is present in the soil solution except in recently fertilized or sodic soils. The type of phosphate ions present in the soil solution depends on the soil pH. In soils of neutral to slightly alkaline pH, HPO₄^2- ion is the dominant form. In slightly or moderately acidic soils, both H₂PO₄^- and HPO₄^2- ions prevail. At strongly acidic soil H₂PO₄^- ion tends to dominate, while above pH 9.0, the PO₄^3- ion becomes more important than H₂PO₄^-.

8.0. Introduction

Food additives are the substances not normally consumed as a food by itself and contain or not contain nutritive value but are added to food to improve freshness, sensory and keeping quality of food. So, a food additive is defined as a substance or a mixture of substances other than the food stuff incorporated in food either directly or indirectly as a result of any phase of production, processing, storage or packaging to improve or maintain the nutritional value, enhance quality, consumer acceptability and facilitate the preparation of materials e.g., acid, alkali, bleaching agents, emulsifying & sterilizing agents, flavours, colours, nutrient supplements, clarifying agents, humectants, chemical preservatives etc. Every food available in the market or at home contains food additives. So, now the question arises that whether additives are safe from consumption/toxicological point of view or not? What are the facts or fictions, if additives are to be used in the food preparation? These are the most important questions to be answered and discussed before their use in food industry.

Introduction

Food being the foremost basic need gets the priority in expenditure of people, especially poor class. Access to food demands affordability, which depends upon the twin factors namely, income of the people and prices prevailing in the country. Slower growth in income than prices would undermine the purchasing power, resulting in inadequate access to food and calorie consumption. Foodgrains account for about four-fifth of the calorie intake of the poor and an increase in cereal prices could significantly reduce the calorie intake of the poor, as it is sensitive to cereal prices.

Introduction

Geostatistics is a branch of statistics that deals with the analysis and modelling of geo-referenced data. Its main aims are to quantify spatial variability and to create maps from point observations. Of course there is much more to geostatistics than just that and indeed some of the other uses of geostatistics are addressed in this chapter too, but the emphasis is on the assessment of spatial variability and geostatistical interpolation.

The first step of geostatistical interpolation is to quantify the spatial correlation structure of the variable of interest. This can be done by examining the observations and how these vary in space. Next spatial interpolation makes use of the quantified spatial correlation to derive optimal predictions at unobserved locations and create a map. The interpolation error is quantified as well, which helps to design optimal spatial sampling schemes that balance data collection costs and map accuracy. All this will be explained in this chapter, but in order to do so we first need to explain the statistical theory that underlies geostatistical interpolation followed by representation of the spatial correlation structure, the basics of geostatistical interpolation (‘kriging’), kriging extensions and spatial stochastic simulation.

Crop protection research has brought out tangible and effective methods to suppress various pests in major agro-ecosystems. Indigenous knowledge in this regard has been tested and validated for its suitability.

Among the 137 Phytophthora isolates collected from bud rot/fruit rot affected coconut gardens in Tamil Nadu, Kerala and Karnataka, four isolates from bud rot affected gardens were identified as P. nicotianae and one as P. capsici. Since, P. nicotianae is found associated with bud rot disease of coconut in three districts representing three states, it is expected that this may emerge as a major pathogen of coconut. Further, placing Trichoderma coir pith cake in the innermost leaf axils of coconut palm in disease endemic areas just before the onset of southwest monsoon (May-end) and thereafter at two months interval was found to be very effective in the management of bud rot disease of coconut.

Guar [Cyamopsis tetragonoloba (L.) Taub.], internationally known as guar, is extremely drought hardy, deep rooted, summer annual legume of great economic and adaptive significance. Virtues of guar effectively match with low and erratic rainfall pattern and high ambient temperature habitats of arid regions. The crop may thrive very well in rainfall range of 250-450 mm with 3-4 spells, temperature range of 25-40°C, RH values of 50-65%, longer days with 8-9 hr sunshine, particularly at maturity. Guar is ideally suited to light to medium textured soils, with no water logging conditions. The crop tolerates less inputs and restricted after care, matching with the arid farmers’ livelihood conditions. It is grown for grain, vegetable, fodder, cattle feed and green manure purposes, mainly in rainfed habitats of Rajasthan, Haryana, Gujarat and to some extent in Punjab and Madhya Pradesh. This crop has recently been introduced in non-traditional regions of Annantpur, Kadappa and Chittoor dry region of Andhra Pradesh. Only duringcurrent summer season of 2012, guar has been successfully cultivated with 4-5 irrigations in parts of Chattirgarh and Vidarbha and in non traditional summer seasons of Rajasthan. The cultivation in non-traditional regions and seasons have increased possibility of two crops in rainy and summer seasons. Even though, guar is cultivated on marginal lands, with marginal inputs in these regions, yet it has occupied the status of international, export oriented cash crop. The same has been due to presence of natural polysaccharide galactomannan gum content in seed endosperm. The gum content has wide industrial uses. Almost 80-85% guar gum produced in India is exported and rest is used for inland commercial demands. Of late, increasing demands of guar gum for USA alone to the tune of 5.0 lakh tonnes annually has led to sky rocketing prices resulting in economic benefit of Rs. 1.0 lakh to 1.5 lakh/ha in 90-100 days only. Hence, guar is rated as a source for providing livelihood security to arid farmers in practical reference. Relevant information on guar have been provided in this chapter.

ABSTRACT

Mining is an important activity for economic development. However, it is associated with land degradation, pollution of air and water, droughts, floods, land slides and land slips, silting of reservoirs, chocking of bridges and disruption of communications are some of the very serious environmental hazards. The need of the hour is to scientifically extract the mineral coupled with adopting mechanical and vegetative measures to rehabilitate the mine spoils. In the present paper effect of mining on natural resources has been detailed, also techniques adopted and standardized for rehabilitation Sahastradhara mined area of Dehra Dun valley over two decades have been clubbed.

ABSTRACT

Fodder availability is a serious concern during winter season in hilly areas as land for growing fodder crops is hardly available unlike plains. Bhimal as an agroforestry species is being cultivated in the Himalayas since long, however, genetic improvement of the species was hardly undertaken in the past barring a few reports on tree improvement of the species. Seeds were used to be usually collected from crooked trees which are easy to climb or swept from the forest floor. Since agroforestry systems have great promise to improve the productivity of both agricultural and tree crops, therefore, keeping that in view, seven provenances (I.C. Bhaintan , I.C. Chamba, I.C. Katkor, I.C. Malas, I.C. Nauni, I.C. Naur, I.C. Tachla) were collected from different regions of Uttarakhand and Himachal Pradesh and evaluated for 10 years (1995-2004). Significant differences in the productivity potential of Bhimal provenances were noticed and the high yielding fodder provenances identified (I.C. Bhaintan , I.C. Chamba and I.C. Malas), yielding as high as 35 q ha^-1 thus fodder productivity could be increased to 25% by planting high yielding provenances. Likewise high yielding provenaces (HYPs) for fuelwood and fibre were identified which can increase the productivity potential of the agroforestry system. In 2005, more than 1200 saplings of HYPs were multiplied in a polyhouse and planted at different elevations in the Himalayas under prevailing agroforestry systems. Differential responses of HYPs in respect of growth and productivity at different locations have been monitored. The rooting behaviour of HYPs was also investigated and it was found that all the three provenances viz., I.C. Bhaintan, I.C. Chamba and I.C. Malas have high soil binding characteristics, thus revealing that apart from production, this tree species plays an important role in soil conservation. Further, high regression of soil binding on above ground biomass and specific root length was recorded among these provenaces. Looking at the performance of such provenances on the farmers’ fields, the demand of high yielding provenaces is increasing. Unlike Eucalyptus, Bhimal had the minimal effect on the performance of field crops and the overall system productivity of the Grewia optiva based agroforestry system was profitable along with insurance against aberrant monsoon conditions.

Abstract

Rise in global energy demand has led to an increase in consumption of fossil fuels. In recent years, there has been an increasing awareness about the consequences of pollution and global warming caused by burning of fossil fuels. This has led to an increased interest in the search for sustainable energy. Transportation sector is a major consumer of world’s energy resources. n-Butanol is one of the most promising alternative bio-fuels which has various advantages over other biofuels. The microbial n-butanol is produced by anaerobic conversion of the substrate to n-butyric acid and subsequently utilized to form n-butanol. The present chapter explores the scope of bacterial butanol production as need of the hour and its use as an alternative biofuel.

Abstract

The normal human microbial flora comprises of both aerobes and anaerobes at various sites. Anaerobes are recognised as pathogens causing simple abscesses to life threatening human infections like gas gangrene. They are also incriminated in a large number of mixed bacterial infections and their diagnosis and specific therapy is important for better patient outcomes. The emergence of Clostridioides difficile as an important pathogen causing antibiotic associated diarrhoeas and its emerging resistance to antimicrobial agents has brought anaerobic microbiology into the forefront. Unfortunately, anaerobic clinical microbiology is difficult to practice with long turnaround time, difficult to grow pathogens, new genera and species being discovered based on 16S rRNA sequencing methods and increasing incidence of antimicrobial resistance being reported in anaerobes. This chapter delves into the important aspects required to improve utilization of anaerobic microbiology services and the variety of human infections we encounter in clinical practice due to anaerobic bacteria.

2.1 Introduction

Biomass store solar energy in the chemical form and it is most precious and versatile resources on earth. Biomass, unlike fossil fuels, is a renewable energy resource that is available where the climatic conditions are favorable for plant growth and production¹. The term biomass is used for all organic materials which are combustible in nature, mainly plant and animal origin present in land and aquatic environments. Biomass is considered carbon neutral, because the amount of carbon it can release is equivalent to the amount it absorbed during its life time. There is no net increase of carbon to the environment in the long term when combusting the lignocellulosic materials. Therefore, we can say that biomass is a renewable source of energy and can play vital role in responding to concerns over the protection of the environment and the security of energy supply^2,3.

Biomass energy accounts for about 15% of the world’s primary energy consumption and about 38% of the primary energy consumption in developing countries⁴. Furthermore, biomass often accounts for more than 90% of the total rural energy supplies in developing countries⁵. It is the main source to meet out domestic energy in developing countries⁶. The efficient use of fuel wood is much more eco-friendly than the use of efficient and conventional fuels like kerosene and liquefy petroleum gas (LPG). LPG emits 15 times more CO₂ per kg than wood, and kerosene emits nearly 10 times as much. CO₂ is the prominent candidate for global. It is commonly assumed that biomass fuel cycles based on renewable in nature and greenhouse-gas (GHG) neutral because the combusted carbon in the form of CO₂ is soon taken up by re-growing vegetation⁷.

Introduction

Agricultural pests cause considerable yield losses throughout the world. In ancient times, farmers had to manage pest problem to safeguard their basic needs, and as a response, the farmers use to practice and develop cultural and mechanical pest control strategies based on their field experience. Over a period of time, these practices have become a part of their production management system. Pest management practices began to change in later stages of the 18^th century. Introduction of pesticides in agricultural ecosystems 1950’s contributed substantially in raising agricultural productivity and they become an integral component of intensive agricultural ecosystems. At the same time, environmentalists raised their concerns on deleterious effects of pesticides on environment, human health and non-target organisms. Excessive use and abuse of pesticides leads to the problems like resistance, resurgence and residues (Beaument, 1993). One of the deleterious effects of over use of pesticides is the death of effective predator and parasitoids. This ultimately leads to the imbalance in the agroecosystem. Concerns about the negative effects of pesticides led to research and promotion of alternative pest control practices – Integrated Pest Control or simply IPC. This new concept called Integrated Pest Control (IPC) and later Integrated Pest Management (IPM) was stimulated by symposia organized by the Food and Agriculture Organization (FAO) of the United Nations in 1966 and the International Organization for Biological Control (IOBC) in 1967. IPM made a paradigm shift in the philosophy of pest control, from pest eradication to pest management. Instead of single tactic control, emphasis was placed on the use of a combination of available tactics in a compatible manner keep the pest below economic injury levels. Consequently, a more integrated approach of pest control was advocated considering the natural mortality factors. IPM is a complex system approach that comprises judicious use of cultural, physical, mechanical, biological, host plant resistance, regulatory and chemical methods.

1.1. Definition of Small-scale Enterprises

According to Shonekan’s keynote address at the Faculty of Business Administration Conference (1992), captured with the theme: “Management of Small and Medium Scale Enterprises in Nigeria.” He said,

“While it is difficult to have one universal definition of SMEs since there are usually many non-constant factors and variables, the spin-off industries are usually small or medium scale. In practical terms, SMEs constitute the bedrock of our national economy. They are our industrial feedstock, the engine of production for the bigger industries. The thriving economies of the world have a record of carefully structured SMEs. In Japan for instance, the bulk of manufacturing is at the small and medium scale levels. This situation also obtains in the ‘Asian Tigers’ (i.e. Malaysia, Taiwan, South Korea, Singapore, etc).”

19.1. Remedies to Combat Unemployment in Nigeria

(a) Rural development

One way of stemming the rural-urban drift, and thus control the resulting unemployment in our urban centers, it for the government to develop the rural areas. Not only should amenities be provided, but jobs should be created in the rural areas to stem the exodus. Fortunately, the Babangida administration seemed to have realized this with the huge amount allocation for the development of rural areas in the 1986 and 1987 budgets.

(b) Population control

Government must intensity the effort to control population growth Nigeria already has a huge population and with an estimated growth rate of about 3 percent annually, this can only compound the unemployment in the face of inadequate resources. It is therefore advocated that the government should renew the family planning campaign to check the population growth.

In the area of pharmaceutical discovery, screening methods continue to play a major role in drug discovery. The screening process is simply testing molecular entities (compounds/natural products) for activity to advance those that exhibit the desired activity. This process has evolved over time in both the testing methods and in the degree of testing. Originally, the screening was done entirely by dosing animals and studying their responses. Then came test tube experiments and now, testing is conducted either with cell lines or with purified proteins in miniaturized test tubes called microplate wells. Screening by microplate has allowed the degree of testing to increase from a very small selected set of compounds to libraries, which contain thousands of test substances. Technological improvements in many areas of science and information technology have led to the evolution of screening methods from time consuming, animal dosing studies to high throughput screening (HTS) methods that have the potential to generate very large datasets of information in a very short time. Today, developments in bioinformatics have opened up the possibility of virtual (in silico) screens for targets where there is sufficient knowledge of the target or of its ligand. High throughput screening has become a pivotal part of drug discovery for identifying potential lead molecules for specific disease targets. The success of screening is measured by several factors including the throughput and costs of the assays, but ultimately by how many of the HTS hits progress forward through the drug discovery pipeline. Miniaturization of assays by conversion from 96- to 384- to 1536- wells to well-less platforms, such as microarrays and the utilization of automated equipments are methodologies implemented to increase the throughput and reduce the cost of the screen.

Wilt

Fusarium oxysporum f.sp. vasinfectum

Economic Importance

• Wilt is one of the major diseases of cotton, found wherever this crop is grown like Mexico, African countries, France, Italy, Yugoslavia, India and West Indies.
• In India, the disease was first reported from Nagpur by Evans in 1908.
• It appears in almost every cotton tract of the country. However, it is more or less absent in the loamy soils of Indo Gangetic plains and sandy loams of Maharashtra, Tamil Nadu, Karnataka and other States.
• In affected susceptible varieties yield losses exceed 45-50%.

The safety of the food supply suitably remains a high main concern for industry stakeholders, regulatory agencies and patrons. With the surfacing of new safety challenges and issues, companies are establishing and upgrading programs to reduce risk factors. These programs are constantly monitored for reliability, repeatability, reproducibility and effectiveness. Due to the health and safety risks posed by chemical, microbiological and environmental contaminants, analytical methods are progressively more becoming a pride and joy of food safety programs. Innovative analytical approaches are being developed in response to budding food safety issues. To monitor for known issues only the established and officially approved methods are used often. Oftentimes, new analytical methods are developed, improved or modified quickly in response to issues, such as melamine contamination, which are unforeseen. In such instances, accurate data derived from sound, validated analytical methods are required to facilitate industry stakeholders and regulators to make sound methodical decisions.

Through research, industry has improved a host of analytical methods in recent years, resulting in higher sensitivity and accuracy for difficult-to-detect contaminants, detection of contaminants in new matrix classes for grades. These advances have been made in the face of changing set of laws, more painstaking method-validation standards and end user demands for safe, quality products. Further to this, this spirit of innovation will continue to be fundamental in industry’s efforts to ensure the safety of the comprehensive food chain.

Introduction

Food is any substance or a product obtained from nature, which contains nutritive and non-nutritive components that help to maintain or improve the health of an individual if consumed in optimal amount (Sukhneet and Malhotra, 2014). Globalization of food production and procurement makes food chains longer and more complex and increases the risk of food safety incidents. Infections and diseases arising from contaminated/adulterated food remain threats to global public health (Havelaar et al., 2015; Luo et al., 2019). The WHO reports shows that every year foodborne diseases cause the death of 33 million people including many children (WHO, 2019). Food safety is linked to the presence of foodborne hazards in food at the point of consumption. Since food safety hazards can occur at any stage in the food chain it is essential that adequate control be in place. Therefore, a combined effort of all parties in the food chain is required to deliver safe food products to the final consumer. Effective and harmonized food safety systems shall manage and ensure the safety and suitability of food in each link of the supply chain.

Although the food industry has the prime responsibility of ensuring safe foods in most societies, the maintenance of a safe food supply is regarded as a responsibility of the government of that country. This responsibility has, over many years, led governments to adopt legislation, standards and regulations for food processing and to impose penalties when a business fails to meet the expectation. As with any legislation, an effective system for detecting failures to comply with the legal requirements increases compliance and hence, in this case, promotes food safety. Governments have an obligation to protect consumer health and this includes protection against food borne diseases. Food standards are therefore necessary to aid governments in protecting public health. However, the standards can only be effective when they are enforced through an efficient food control system. This therefore requires comprehensive legislation inspection, food monitoring and food borne surveillance. An efficient food control system must be supported by competent staff with good laboratory services. Political and institutional support and stability are also important elements.

Introduction

Food is a resource of vital importance and its safety in the whole chain, from producer to consumer, is a worldwide concern. In fact, as food trade expands throughout the world, food safety has become a shared concern among all consumers. This issue began to be taken seriously at a period where there is a significant increase of illness caused by infected food in both developed and developing countries. Unsafe food contains hazardous agents or contaminants that can make people sick, immediately or by increasing their risk of chronic disease. Contaminants can enter food at many different points in the food production process, and can occur naturally or as the result of poor or inadequate production practices. International competitiveness depends more on quality and safety concerns than on prices. Governments and local authorities intervene in the market place in setting technical regulations; and sanitary and phytosanitary measures. This encouraged food processing companies around the world to implement food safety management systems which guarantees the production and distribution of safe foods. Prerequisite Programs (PRPs) are considered as the integral part of food safety standards and audit schemes all over the world. It is essential to implement food safety programmes in every company to check the chances of illness or injury due to unsafe food.